security/clamav/Makefile

   1 # Created by: markun@onohara.to
   2 # $FreeBSD$
   3
   4 PORTNAME=       clamav
   5 PORTVERSION=    0.98.4
   6 PORTREVISION=   2
   7 CATEGORIES=     security
   8 MASTER_SITES=   SF
   9
  10 MAINTAINER=     garga@FreeBSD.org
  11 COMMENT=        Command line virus scanner written entirely in C
  12
  13 LICENSE=        GPLv2
  14
  15 LIB_DEPENDS=    libltdl.so:${PORTSDIR}/devel/libltdl \
  16                 libcurl.so:${PORTSDIR}/ftp/curl
  17
  18 OPTIONS_DEFINE= ARC ARJ LHA UNZOO UNRAR LLVM TESTS MILTER LDAP ICONV STDERR \
  19                 EXPERIMENTAL DOCS IPV6 DMG_XAR
  20
  21 ARC_DESC=               Enable arch archives support
  22 ARJ_DESC=               Enable arj archives support
  23 LHA_DESC=               Enable lha archives support
  24 UNZOO_DESC=             Enable zoo archives support
  25 UNRAR_DESC=             Enable rar archives support
  26 LLVM_DESC=              Enable JIT Bytecode compiler (bundled LLVM)
  27 TESTS_DESC=             Run compile-time tests (req. python)
  28 MILTER_DESC=            Compile the milter interface
  29 STDERR_DESC=            Print logs to stderr instead of stdout
  30 EXPERIMENTAL_DESC=      Build experimental code
  31 DMG_XAR_DESC=           Enable DMG and XAR archives support
  32
  33 OPTIONS_DEFAULT=        ARC ARJ LHA UNZOO UNRAR LLVM DOCS IPV6 DMG_XAR
  34
  35 ARC_RUN_DEPENDS=        arc:${PORTSDIR}/archivers/arc
  36 ARJ_RUN_DEPENDS=        arj:${PORTSDIR}/archivers/arj
  37 LHA_RUN_DEPENDS=        lha:${PORTSDIR}/archivers/lha
  38 UNZOO_RUN_DEPENDS=      unzoo:${PORTSDIR}/archivers/unzoo
  39 UNRAR_CONFIGURE_ENABLE= unrar
  40 MILTER_CONFIGURE_ENABLE=milter
  41 TESTS_CONFIGURE_ENABLE= check
  42 TESTS_BUILD_DEPENDS=    ${LOCALBASE}/include/check.h:${PORTSDIR}/devel/libcheck
  43 ICONV_CONFIGURE_ON=     --with-iconv
  44 ICONV_CONFIGURE_OFF=    --without-iconv
  45 ICONV_USES=             iconv
  46 EXPERIMENTAL_CONFIGURE_ENABLE=  experimental
  47 IPV6_CONFIGURE_ENABLE=  ipv6
  48 DMG_XAR_CONFIGURE_ENABLE=       xml
  49 DMG_XAR_USE=            GNOME=libxml2
  50
  51 GNU_CONFIGURE=  yes
  52 USE_LDCONFIG=   yes
  53 USES=           gmake libtool
  54 INSTALL_TARGET= install-strip
  55 USE_RC_SUBR=    clamav-clamd clamav-freshclam
  56
  57 PORTDOCS=       *
  58
  59 DBDIR=          /var/db/clamav
  60 LOGDIR=         /var/log/clamav
  61 RUNDIR=         /var/run/clamav
  62 PLIST_SUB+=     DBDIR=${DBDIR} \
  63                 LOGDIR=${LOGDIR} \
  64                 RUNDIR=${RUNDIR} \
  65                 CLAMAVUSER=${CLAMAVUSER} \
  66                 CLAMAVGROUP=${CLAMAVGROUP}
  67 PY_NO_THREAD=   ${WRKDIR}/.python-has-no-threads
  68 OPTIONS_SUB=    yes
  69
  70 CONFIGURE_ARGS= --libdir=${PREFIX}/lib \
  71                 --with-dbdir=${DBDIR} \
  72                 --with-zlib=/usr \
  73                 --disable-clamuko \
  74                 --disable-clamav \
  75                 --enable-bigstack \
  76                 --enable-readdir_r \
  77                 --enable-gethostbyname_r \
  78                 --disable-dependency-tracking \
  79                 --enable-clamdtop
  80 CPPFLAGS+=      -I${LOCALBASE}/include \
  81                 ${PTHREAD_CFLAGS}
  82 LDFLAGS+=       -L${LOCALBASE}/lib \
  83                 ${PTHREAD_LIBS}
  84
  85 # This port has a problem with -pthread,
  86 # force to use -lthr until it's not fixed.
  87 PTHREAD_LIBS=   -lthr
  88
  89 CONFLICTS?=     clamav-milter-[0-9]*
  90
  91 CLAMAVUSER?=    clamav
  92 CLAMAVGROUP?=   clamav
  93
  94 CLAMAV_CLAMD_SOCKET?=   ${RUNDIR}/clamd.sock
  95 CLAMAV_MILTER_SOCKET?=  ${RUNDIR}/clmilter.sock
  96
  97 SUB_FILES=      pkg-deinstall
  98 SUB_LIST+=      DBDIR=${DBDIR} \
  99                 LOGDIR=${LOGDIR} \
 100                 RUNDIR=${RUNDIR} \
 101                 CHMOD=${CHMOD} \
 102                 CHOWN=${CHOWN} \
 103                 CLAMAVUSER=${CLAMAVUSER} \
 104                 CLAMAVGROUP=${CLAMAVGROUP} \
 105                 CLAMAV_CLAMD_SOCKET=${CLAMAV_CLAMD_SOCKET} \
 106                 CLAMAV_MILTER_SOCKET=${CLAMAV_MILTER_SOCKET}
 107
 108 SED_CONF=       -E -e 's|^\#?(Example)$$|\#\1|' \
 109                 -e 's|^\#?((Update)?LogFile) .*/([a-z]+\.log)$$|\1 ${LOGDIR}/\3|' \
 110                 -e 's|^\#?(PidFile) .*/([a-z\-]+\.pid)$$|\1 ${RUNDIR}/\2|' \
 111                 -e 's|^\#?(LocalSocket) .*$$|\1 ${CLAMAV_CLAMD_SOCKET}|' \
 112                 -e 's|^\#?(User) .*$$|\1 ${CLAMAVUSER}|' \
 113                 -e 's|^\#?(AllowSupplementaryGroups).*$$|\1 yes|' \
 114                 -e 's|^\#?(ScanMail).*$$|\1 yes|' \
 115                 -e 's|^\#?(DatabaseDirectory) .*$$|\1 ${DBDIR}|' \
 116                 -e 's|^\#?(DatabaseOwner) .*$$|\1 ${CLAMAVUSER}|' \
 117                 -e 's|^\#?(FixStaleSocket).*$$|\1 yes|' \
 118                 -e 's|^\#?(NotifyClamd) .*$$|\1 ${PREFIX}/etc/clamd.conf|' \
 119                 -e 's|^\#?(MilterSocket) */tmp.*$$|\1 ${CLAMAV_MILTER_SOCKET}|' \
 120                 -e 's|^\#?(ClamdSocket).*$$|\1 unix:${CLAMAV_CLAMD_SOCKET}|'
 121
 122 PLIST_SUB+=     CLAMAVUSER=${CLAMAVUSER} \
 123                 CLAMAVGROUP=${CLAMAVGROUP}
 124
 125 .include <bsd.port.options.mk>
 126
 127 .if ${CLAMAVUSER} == "clamav"
 128 USERS=  clamav
 129 .endif
 130
 131 .if ${CLAMAVGROUP} == "clamav"
 132 GROUPS= clamav mail
 133 .endif
 134
 135 .if ${PORT_OPTIONS:MLLVM} && ( ${ARCH} == "i386" || ${ARCH} == "x86_64" )
 136 CONFIGURE_ARGS+=--enable-llvm
 137 . if ${PORT_OPTIONS:MTESTS}
 138 USES+=          python:build
 139 . endif
 140 .else
 141 CONFIGURE_ARGS+=--disable-llvm
 142 .endif
 143
 144 .if ${PORT_OPTIONS:MMILTER}
 145 USE_RC_SUBR+=   clamav-milter
 146 . if ${PORT_OPTIONS:MLDAP} && exists(${LOCALBASE}/lib/libldap.so)
 147 USE_OPENLDAP=   yes
 148 LDFLAGS+=       -lldap
 149 . endif
 150
 151 . if !exists(/usr/lib/libmilter.a) || exists(${LOCALBASE}/lib/libmilter.a)
 152 BUILD_DEPENDS+= ${LOCALBASE}/lib/libmilter.a:${PORTSDIR}/mail/sendmail
 153 CONFIGURE_ARGS+=--with-sendmail=${LOCALBASE}/sbin/sendmail
 154 . else
 155 CONFIGURE_ARGS+=--with-sendmail=/usr/sbin/sendmail
 156 . endif
 157 .endif
 158
 159 .if ${PORT_OPTIONS:MSTDERR}
 160 EXTRA_PATCHES+=         ${FILESDIR}/extra-patch-shared_output.c
 161 .endif
 162
 163 .include <bsd.port.pre.mk>
 164
 165 .if ${ARCH} == "i386"
 166 CFLAGS+=        -march=i486
 167 .endif
 168
 169 post-patch:
 170         @${REINPLACE_CMD} -e 's|%%PTHREAD_LIBS%%|${PTHREAD_LIBS}|g' \
 171                 ${WRKSRC}/${CONFIGURE_SCRIPT}
 172         @${REINPLACE_CMD} -e 's,^\(pkgconfigdir = \).*$$,\1$$\(prefix\)/libdata/pkgconfig,g' \
 173                 ${WRKSRC}/Makefile.in
 174         @${REINPLACE_CMD} ${SED_CONF} \
 175                 ${WRKSRC}/etc/clamd.conf.sample \
 176                 ${WRKSRC}/etc/freshclam.conf.sample \
 177                 ${WRKSRC}/etc/clamav-milter.conf.sample
 178         @${REINPLACE_CMD} -e 's|0x100000000|0x100000000ULL|g' \
 179                 ${WRKSRC}/libclamunrar/unrar.c
 180
 181 .if ${PORT_OPTIONS:MLLVM} && ${PORT_OPTIONS:MTESTS}
 182 pre-configure:
 183         @if ! ${PYTHON_CMD} -c "import thread" >/dev/null 2>&1; then \
 184                 ${ECHO_MSG} ""; \
 185                 ${ECHO_MSG} "==========================================================================="; \
 186                 ${ECHO_MSG} "= Unit tests REQUIRES python built with thread support, and yours is not. ="; \
 187                 ${ECHO_MSG} "= It will not be called during this build                                 ="; \
 188                 ${ECHO_MSG} "==========================================================================="; \
 189                 ${ECHO_MSG} ""; \
 190                 ${TOUCH} ${PY_NO_THREAD}; \
 191         fi
 192 .endif
 193
 194 .if ${PORT_OPTIONS:MTESTS}
 195 post-build:
 196         @if [ ! -f "${PY_NO_THREAD}" ]; then \
 197                 ${MAKE_CMD} -C ${WRKSRC} check; \
 198         fi
 199 .endif
 200
 201 post-install:
 202         ${INSTALL_DATA} ${WRKSRC}/clamav-config.h ${STAGEDIR}${PREFIX}/include
 203         @${MKDIR} ${STAGEDIR}${DOCSDIR}/html \
 204                   ${STAGEDIR}${DBDIR} \
 205                   ${STAGEDIR}${LOGDIR} \
 206                   ${STAGEDIR}${RUNDIR}
 207         ${INSTALL_DATA} ${WRKSRC}/NEWS ${WRKSRC}/ChangeLog ${STAGEDIR}${DOCSDIR}
 208         ${INSTALL_DATA} ${WRKSRC}/docs/html/* ${STAGEDIR}${DOCSDIR}/html
 209
 210 .include <bsd.port.post.mk>