etc/devd: revise default devd.conf(5)
[dragonfly.git] / etc / devd.conf
CommitLineData
e348c2ad 1# $FreeBSD: head/etc/devd.conf 261894 2014-02-14 15:31:48Z avg $
71fc104f
HT
2#
3# Refer to devd.conf(5) and devd(8) man pages for the details on how to
4# run and configure devd.
5#
6
7# NB: All regular expressions have an implicit ^$ around them.
8# NB: device-name is shorthand for 'match device-name'
9
10options {
e348c2ad
SW
11 # Each "directory" directive adds a directory to the list of
12 # directories that we scan for files. Files are loaded in the order
13 # that they are returned from readdir(3). The rule-sets are combined
14 # to create a DFA that's used to match events to actions.
71fc104f
HT
15 directory "/etc/devd";
16 directory "/usr/local/etc/devd";
e348c2ad 17 pid-file "/var/run/devd.pid";
71fc104f
HT
18
19 # Setup some shorthand for regex that we use later in the file.
20 #XXX Yes, these are gross -- imp
21 set scsi-controller-regex
7efec73e 22 "(aac|adv|adw|amd|amr|asr|bt|ciss|dpt|\
fd501800 23 ida|iir|ips|isp|mlx|mly|mpr|mps|mpt|ncr|sym|trm)\
71fc104f 24 [0-9]+";
cc419283 25 set wifi-driver-regex
24306955 26 "(ath|bwn|iwi|iwm|iwn|ral|rum|run|urtwn|wi|wpi)[0-9]+";
71fc104f
HT
27};
28
29# Note that the attach/detach with the highest value wins, so that one can
30# override these general rules.
31
32#
33# Configure the interface on attach. Due to a historical accident, this
34# script is called pccard_ether.
35#
e348c2ad
SW
36# NB: DETACH events are ignored; the kernel should handle all cleanup
37# (routes, arp cache). Beware of races against immediate create
38# of a device with the same name; e.g.
39# ifconfig bridge0 destroy; ifconfig bridge0 create
71fc104f 40#
dd9e3d2e
SW
41#notify 0 {
42# match "system" "IFNET";
43# match "subsystem" "!usbus[0-9]+";
44# match "type" "ATTACH";
45# action "/etc/pccard_ether $subsystem start";
46#};
71fc104f
HT
47
48#
817cf585 49# Try to start DHCP client on Ethernet-like interfaces when the link comes
71fc104f 50# up. Only devices that are configured to support DHCP will actually
817cf585 51# run it. No link down rule exists because DHCP client automatically exits
71fc104f
HT
52# when the link goes down.
53#
dd9e3d2e
SW
54#notify 0 {
55# match "system" "IFNET";
56# match "type" "LINK_UP";
57# media-type "ethernet";
817cf585 58# action "/etc/rc.d/dhcp_client quietstart $subsystem";
dd9e3d2e 59#};
71fc104f
HT
60
61#
cc419283
AL
62# Like Ethernet devices, but separate because 802.11 requires spawning
63# wlan(4) interface.
71fc104f 64#
dd9e3d2e 65#attach 0 {
cc419283
AL
66# device-name "$wifi-driver-regex";
67# action "/etc/pccard_ether $device-name startchildren";
68#};
69#detach 0 {
70# device-name "$wifi-driver-regex";
71# action "/etc/pccard_ether $device-name stopchildren";
dd9e3d2e
SW
72#};
73#notify 0 {
74# match "system" "IFNET";
75# match "type" "LINK_UP";
76# media-type "802.11";
817cf585 77# action "/etc/rc.d/dhcp_client quietstart $subsystem";
dd9e3d2e 78#};
71fc104f 79
71fc104f
HT
80# An entry like this might be in a different file, but is included here
81# as an example of how to override things. Normally 'ed50' would match
82# the above attach/detach stuff, but the value of 100 makes it
83# hard wired to 1.2.3.4.
e348c2ad
SW
84attach 100 {
85 device-name "ed50";
86 action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
87};
88detach 100 {
89 device-name "ed50";
90};
71fc104f 91
e348c2ad 92# When a USB Bluetooth dongle appears, activate it
dd9e3d2e
SW
93#attach 100 {
94# device-name "ubt[0-9]+";
95# action "/etc/rc.d/bluetooth quietstart $device-name";
96#};
97#detach 100 {
98# device-name "ubt[0-9]+";
99# action "/etc/rc.d/bluetooth quietstop $device-name";
100#};
e348c2ad
SW
101
102# Firmware downloader for Atheros AR3011 based USB Bluetooth devices
103#attach 100 {
104# match "vendor" "0x0cf3";
105# match "product" "0x3000";
106# action "sleep 2 && /usr/sbin/ath3kfw -d $device-name -f /usr/local/etc/ath3k-1.fw";
107#};
71fc104f 108
71fc104f 109# When a USB keyboard arrives, attach it as the console keyboard.
dd9e3d2e
SW
110#attach 100 {
111# device-name "ukbd0";
112# action "/etc/rc.d/syscons setkeyboard /dev/ukbd0";
113#};
114#detach 100 {
115# device-name "ukbd0";
116# action "/etc/rc.d/syscons setkeyboard /dev/kbd0";
117#};
e348c2ad 118
dd9e3d2e
SW
119#notify 100 {
120# match "system" "DEVFS";
121# match "subsystem" "CDEV";
122# match "type" "CREATE";
123# match "cdev" "atp[0-9]+";
124#
125# action "/etc/rc.d/moused quietstart $cdev";
126#};
e348c2ad 127
62c0a8e4
MN
128notify 100 {
129 match "system" "DEVFS";
130 match "subsystem" "CDEV";
131 match "type" "CREATE";
132 match "cdev" "ums[0-9]+";
133
134 action "/etc/rc.d/moused quietstart $cdev";
135};
e348c2ad 136
dd9e3d2e
SW
137#notify 100 {
138# match "system" "DEVFS";
139# match "subsystem" "CDEV";
140# match "type" "CREATE";
141# match "cdev" "wsp[0-9]+";
142#
143# action "/etc/rc.d/moused quietstart $cdev";
144#};
e348c2ad 145
62c0a8e4
MN
146notify 100 {
147 match "system" "DEVFS";
148 match "subsystem" "CDEV";
149 match "type" "DESTROY";
150 match "cdev" "ums[0-9]+";
151
152 action "/etc/rc.d/moused quietstop $cdev";
153};
e348c2ad
SW
154
155# Firmware download into the ActiveWire board. After the firmware download is
156# done, the device detaches and reappears as something new and shiny
157# automatically.
158attach 100 {
159 match "vendor" "0x0854";
160 match "product" "0x0100";
161 match "release" "0x0000";
162 action "/usr/local/bin/ezdownload -f /usr/local/share/usb/firmware/0854.0100.0_01.hex $device-name";
163};
164
165# Firmware download for Entrega Serial DB25 adapter.
166attach 100 {
167 match "vendor" "0x1645";
168 match "product" "0x8001";
169 match "release" "0x0101";
170 action "if ! kldstat -n usio > /dev/null 2>&1 ; then kldload usio; fi; /usr/sbin/ezdownload -v -f /usr/share/usb/firmware/1645.8001.0101 /dev/$device-name";
171};
172
173# This entry starts the ColdSync tool in daemon mode. Make sure you have an up
174# to date /usr/local/etc/palms. We override the 'listen' settings for port and
175# type in /usr/local/etc/coldsync.conf.
176notify 100 {
177 match "system" "USB";
178 match "subsystem" "DEVICE";
179 match "type" "ATTACH";
180 match "vendor" "0x082d";
181 match "product" "0x0100";
182 match "release" "0x0100";
183 action "/usr/local/bin/coldsync -md -p /dev/$cdev -t usb";
184};
71fc104f
HT
185
186#
e348c2ad 187# Rescan SCSI device-names on attach, but not detach. However, it is
71fc104f
HT
188# disabled by default due to reports of problems.
189#
e348c2ad
SW
190attach 0 {
191 device-name "$scsi-controller-regex";
192// action "camcontrol rescan all";
193};
194
71fc104f
HT
195# Don't even try to second guess what to do about drivers that don't
196# match here. Instead, pass it off to syslog. Commented out for the
197# moment, as the pnpinfo variable isn't set in devd yet. Individual
198# variables within the bus supplied pnpinfo are set.
e348c2ad 199nomatch 0 {
71fc104f 200# action "logger Unknown device: $pnpinfo $location $bus";
e348c2ad 201};
71fc104f 202
71fc104f 203# Various logging of unknown devices.
e348c2ad
SW
204nomatch 10 {
205 match "bus" "uhub[0-9]+";
206 action "logger Unknown USB device: vendor $vendor product $product \
207 bus $bus";
208};
71fc104f 209
71fc104f
HT
210# Some PC-CARDs don't offer numerical manufacturer/product IDs, just
211# show the CIS info there.
e348c2ad
SW
212nomatch 20 {
213 match "bus" "pccard[0-9]+";
214 match "manufacturer" "0xffffffff";
215 match "product" "0xffffffff";
216 action "logger Unknown PCCARD device: CISproduct $cisproduct \
217 CIS-vendor $cisvendor bus $bus";
218};
219
220nomatch 10 {
221 match "bus" "pccard[0-9]+";
222 action "logger Unknown PCCARD device: manufacturer $manufacturer \
223 product $product CISproduct $cisproduct CIS-vendor \
224 $cisvendor bus $bus";
225};
226
227nomatch 10 {
228 match "bus" "cardbus[0-9]+";
229 action "logger Unknown Cardbus device: device $device class $class \
230 vendor $vendor bus $bus";
231};
71fc104f 232
71fc104f 233# Switch power profiles when the AC line state changes.
dd9e3d2e
SW
234#notify 10 {
235# match "system" "ACPI";
236# match "subsystem" "ACAD";
237# action "/etc/rc.d/power_profile $notify";
238#};
71fc104f 239
71fc104f
HT
240# Notify all users before beginning emergency shutdown when we get
241# a _CRT or _HOT thermal event and we're going to power down the system
242# very soon.
e348c2ad
SW
243notify 10 {
244 match "system" "ACPI";
245 match "subsystem" "Thermal";
246 match "notify" "0xcc";
247 action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'";
248};
71fc104f 249
71fc104f
HT
250# User requested suspend, so perform preparation steps and then execute
251# the actual suspend process.
e348c2ad
SW
252notify 10 {
253 match "system" "ACPI";
254 match "subsystem" "Suspend";
255 action "/etc/rc.suspend acpi $notify";
256};
257notify 10 {
258 match "system" "ACPI";
259 match "subsystem" "Resume";
260 action "/etc/rc.resume acpi $notify";
261};
71fc104f 262
e348c2ad
SW
263/* EXAMPLES TO END OF FILE
264
265# An example of something that a vendor might install if you were to
266# add their device. This might reside in /usr/local/etc/devd/deqna.conf.
267# A deqna is, in this hypothetical example, a pccard ethernet-like device.
268# Students of history may know other devices by this name, and will get
269# the in-jokes in this entry.
270nomatch 10 {
271 match "bus" "pccard[0-9]+";
272 match "manufacturer" "0x1234";
273 match "product" "0x2323";
274 action "kldload if_deqna";
275};
276attach 10 {
277 device-name "deqna[0-9]+";
278 action "/etc/pccard_ether $device-name start";
279};
280detach 10 {
281 device-name "deqna[0-9]+";
282 action "/etc/pccard_ether $device-name stop";
283};
71fc104f 284
71fc104f
HT
285# Examples of notify hooks. A notify is a generic way for a kernel
286# subsystem to send event notification to userland.
e348c2ad 287
71fc104f
HT
288# Here are some examples of ACPI notify handlers. ACPI subsystems that
289# generate notifies include the AC adapter, power/sleep buttons,
290# control method batteries, lid switch, and thermal zones.
291#
292# Information returned is not always the same as the ACPI notify
293# events. See the ACPI specification for more information about
294# notifies. Here is the information returned for each subsystem:
295#
e348c2ad
SW
296# ACAD: AC line state (0 is offline, 1 is online)
297# Button: Button pressed (0 for power, 1 for sleep)
298# CMBAT: ACPI battery events
299# Lid: Lid state (0 is closed, 1 is open)
300# RCTL: Resource limits
71fc104f 301# Suspend, Resume: Suspend and resume notification
e348c2ad 302# Thermal: ACPI thermal zone events
71fc104f
HT
303#
304# This example calls a script when the AC state changes, passing the
305# notify value as the first argument. If the state is 0x00, it might
306# call some sysctls to implement economy mode. If 0x01, it might set
307# the mode to performance.
e348c2ad
SW
308notify 10 {
309 match "system" "ACPI";
310 match "subsystem" "ACAD";
311 action "/etc/acpi_ac $notify";
312};
313
314# This example works around a memory leak in PostgreSQL, restarting
315# it when the "user:pgsql:swap:devctl=1G" rctl(8) rule gets triggered.
316notify 0 {
317 match "system" "RCTL";
318 match "rule" "user:70:swap:.*";
319 action "/usr/local/etc/rc.d/postgresql restart";
320};
321
322*/