dhcpcd: Remove chroot setup and restore things as they were before
[dragonfly.git] / etc / defaults / rc.conf
CommitLineData
984263bc 1#!/bin/sh
984263bc
MD
2
3# This is rc.conf - a file full of useful variables that you can set
4# to change the default startup behavior of your system. You should
5# not edit this file! Put any overrides into one of the ${rc_conf_files}
6# instead and you will be able to update these defaults later without
7# spamming your local configuration information.
8#
9# The ${rc_conf_files} files should only contain values which override
10# values set in this file. This eases the upgrade path when defaults
11# are changed and new features are added.
12#
13# All arguments must be in double or single quotes.
14#
03137732
AL
15# For a more detailed explanation of all the rc.conf variables, please
16# refer to the rc.conf(5) manual page.
17#
9c600e7d 18# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
984263bc
MD
19
20##############################################################
21### Important initial Boot-time options ####################
22##############################################################
23
9c600e7d
MD
24rc_debug="NO" # Set to YES to enable debugging output from rc.d
25rc_info="YES" # Enables display of informational messages at boot.
212bd1a8 26rc_startmsgs="YES" # Show "Starting foo:" messages at boot
9c600e7d 27rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
984263bc 28swapfile="NO" # Set to name of swapfile if aux swapfile desired.
8861c912 29powerd_enable="NO" # Run powerd to adjust CPU speed.
2f7069fc 30powerd_flags="" # additional flags for powerd(8).
eb3a3472
HT
31sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes.
32sensorsd_flags="" # additional flags for sensorsd(8).
01b70f3f
SW
33hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging.
34hotplugd_flags="" # additional flags for hotplugd(8)
984263bc 35pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
817cf585 36pccard_ether_delay="5" # Delay before trying to start DHCP client in pccard_ether
9c600e7d 37removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
ee48961f 38local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d"
a9963945 39 # startup script dirs.
984263bc
MD
40script_name_sep=" " # Change if your startup scripts' names contain spaces
41rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
42fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
be813d7a 43netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
9c600e7d
MD
44extra_netfs_types="NO" # List of network extra filesystem types for delayed
45 # mount at startup (or NO).
b374f6d5
MS
46devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf"
47 # Config files for devfs(5)
80d125ea
AL
48tmpfs_var_run="NO" # Set to YES to mount a tmpfs(5) at /var/run
49tmpfs_tmp="NO" # Set to YES to mount a tmpfs(5) at /tmp
984263bc
MD
50
51##############################################################
52### Network configuration sub-section ######################
53##############################################################
54
55### Basic network and firewall/security options: ###
fde62252
MD
56#
57# see 'man firewall' for an explanation of the default firewall rules
58#
984263bc
MD
59hostname="" # Set this!
60nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
817cf585
AL
61dhcp_client="dhclient" # Name of the rc script that is called to start
62 # the DHCP client, e.g., "dhcpcd" or "dhclient"
4eba35c8
AL
63dhcpcd_enable="NO" # Set to YES to run dhcpcd in master mode.
64dhcpcd_program="/sbin/dhcpcd"
d7d1b3cd 65dhcpcd_flags="-b"
9c600e7d 66dhclient_program="/sbin/dhclient" # Path to dhcp client program.
0f5f50b1 67dhclient_flags="-w" # Additional flags to pass to dhcp client.
984263bc
MD
68firewall_enable="NO" # Set to YES to enable firewall functionality
69firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
70firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
fde62252
MD
71firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
72firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
73firewall_allowed_icmp_types="0 3 8 11 12 13 14"
74firewall_open_tcp_ports="22 25 53 80 113 443"
75firewall_open_udp_ports="53"
984263bc
MD
76firewall_quiet="NO" # Set to YES to suppress rule display
77firewall_logging="NO" # Set to YES to enable events logging
78firewall_flags="" # Flags passed to ipfw when type is a file
6fd380c2
AL
79ipfw3_enable="NO" # Set to YES to enable ipfw3(8) firewall
80ipfw3_program="/sbin/ipfw3" # where the ipfw3 program lives
81ipfw3_script="/etc/ipfw3.rules" # Script to run to set up the firewall rules
82ipfw3_modules="ipfw3 ipfw3_basic" # IPFW3 modules to be loaded
984263bc
MD
83ip_portrange_first="NO" # Set first dynamically allocated port
84ip_portrange_last="NO" # Set last dynamically allocated port
984263bc
MD
85natd_program="/sbin/natd" # path to natd, if you want a different one.
86natd_enable="NO" # Enable natd (if firewall_enable == YES).
87natd_interface="" # Public interface or IPaddress to use.
88natd_flags="" # Additional flags for natd.
95cc27f0
JS
89pf_enable="NO" # Set to YES to enable packet filter (pf)
90pf_rules="/etc/pf.conf" # rules definition file for pf
1cee7797 91pf_program="/usr/sbin/pfctl" # where the pfctl program lives
95cc27f0
JS
92pf_flags="" # additional flags for pfctl
93pflog_enable="NO" # Set to YES to enable packet filter logging
4bf6ceae 94pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
1cee7797 95pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
95cc27f0 96pflog_flags="" # additional flags for pflogd
984263bc
MD
97tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
98log_in_vain="0" # >=1 to log connects to ports w/o listeners.
99tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
100# For the following option you need to have TCP_DROP_SYNFIN set in your
dd7331fe 101# kernel. Please refer to LINT64 details.
984263bc
MD
102tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
103 # NOTE: this violates the TCP specification
104icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
105icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
ef976ecc 106netif_enable="YES" # Set to NO to not configure network interfaces.
984263bc
MD
107network_interfaces="auto" # List of network interfaces (or "auto").
108cloned_interfaces="" # List of cloned network interfaces to create.
dd7331fe 109#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config.
984263bc
MD
110ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
111#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
f26c267a 112#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
984263bc
MD
113#
114# If you have any sppp(4) interfaces above, you might also want to set
115# the following parameters. Refer to spppcontrol(8) for their meaning.
116sppp_interfaces="" # List of sppp interfaces.
9118151a
SW
117#sppp_interfaces="...0" # example: sppp over ...
118#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
984263bc
MD
119gif_interfaces="NO" # List of GIF tunnels (or "NO").
120#gif_interfaces="gif0 gif1" # Examples typically for a router.
121 # Choose correct tunnel addrs.
122#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
123#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
124
125# User ppp configuration.
126ppp_enable="NO" # Start user-ppp (or NO).
127ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
128 # For details see man page for ppp(8). Default is auto.
129ppp_nat="YES" # Use PPP's internal network address translation or NO.
130ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
131ppp_user="root" # Which user to run ppp as
132
133### Network daemon (miscellaneous) ###
134syslogd_enable="YES" # Run syslog daemon (or NO).
135syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
8d5305b8
MD
136#syslogd_flags="-s" # Flags to syslogd (if enabled).
137syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
9c600e7d 138inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
984263bc
MD
139inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
140inetd_flags="-wW" # Optional flags to inetd
984263bc 141
984263bc
MD
142rwhod_enable="NO" # Run the rwho daemon (or NO).
143rwhod_flags="" # Flags for rwhod
144rarpd_enable="NO" # Run rarpd (or NO).
145rarpd_flags="" # Flags to rarpd.
9c600e7d
MD
146bootparamd_enable="NO" # Run bootparamd (or NO).
147bootparamd_flags="" # Flags to bootparamd
984263bc
MD
148pppoed_enable="NO" # Run the PPP over Ethernet daemon.
149pppoed_provider="*" # Provider and ppp(8) config file entry.
150pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
151pppoed_interface="fxp0" # The interface that pppoed runs on.
152sshd_enable="NO" # Enable sshd
153sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
154sshd_flags="" # Additional flags for sshd.
155
830cb541
JS
156ftpd_enable="NO" # Run stand-alone ftp daemon (or NO).
157ftpd_flags="" # Flags for ftpd, -D added implicitly.
158
8716355d
DF
159wpa_supplicant_enable="NO" # Run wpa_supplicant.
160wpa_supplicant_program="/usr/sbin/wpa_supplicant"
161wpa_supplicant_flags="-c /etc/wpa_supplicant.conf"
162
5586c53b
CP
163### Network File System (NFS): ###
164### Server-side options also need rpcbind_enable="YES" ###
d615ff4f
MD
165###
166### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
167### the mtime matches the data cache is left intact.
168###
e2950f41 169autofs_enable="NO" # Run automountd(8)
d7e676e5
SW
170automount_flags="" # Flags to automount(8) (if autofs enabled).
171automountd_flags="" # Flags to automountd(8) (if autofs enabled).
172autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
984263bc 173nfs_client_enable="NO" # This host is an NFS client (or NO).
d615ff4f
MD
174nfs_access_cache="5" # Client attribute cache timeout in seconds
175#nfs_neg_cache="3" # Client attribute negative hit cache timeout
984263bc
MD
176nfs_server_enable="NO" # This host is an NFS server (or NO).
177nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
9c600e7d 178mountd_enable="NO" # Run mountd (or NO).
984263bc
MD
179mountd_flags="-r" # Flags to mountd (if NFS server enabled).
180weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
181nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
182nfs_bufpackets="" # bufspace (in packets) for client
9c600e7d 183rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
ce0e08e2 184rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
9c600e7d 185rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
ce0e08e2 186rpc_statd_flags="" # Flags to rpc.statd (if enabled).
72067a39 187rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
9c600e7d 188rpcbind_enable="NO" # Run the portmapper service (YES/NO).
ce0e08e2 189rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
9c600e7d 190rpcbind_flags="" # Flags to rpcbind (if enabled).
984263bc
MD
191rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
192keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
193keyserv_flags="" # Flags to keyserv (if enabled).
194
195### Network Time Services options: ###
34b25456
RG
196dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO).
197dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
198dntpd_flags="" # Flags to dntpd (if enabled) also server name(s)
984263bc 199
5e2415d8 200# Bluetooth deamons and options:
5f834906
SW
201btconfig_enable="NO" # Configure Bluetooth devices (or NO).
202btconfig_devices="" # List of Bluetooth devices (or empty for all).
203#btconfig_<device>="" # Parameters to pass to <device>.
204btconfig_args="" # Parameters to pass to all devices.
205sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO).
206sdpd_flags="" # Flags to sdpd (if enabled).
ec4e37b7
HT
207bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO).
208bthcid_flags="" # Flags to bthcid (if enabled).
5e2415d8 209
9c600e7d 210# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
984263bc
MD
211nis_client_enable="NO" # We're an NIS client (or NO).
212nis_client_flags="" # Flags to ypbind (if enabled).
213nis_ypset_enable="NO" # Run ypset at boot time (or NO).
214nis_ypset_flags="" # Flags to ypset (if enabled).
215nis_server_enable="NO" # We're an NIS server (or NO).
216nis_server_flags="" # Flags to ypserv (if enabled).
217nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
218nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
219nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
220nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
221
222### Network routing options: ###
223defaultrouter="NO" # Set to default gateway (or NO).
224static_routes="" # Set to static route list (or leave empty).
225gateway_enable="NO" # Set to YES if this host will be a gateway.
226router_enable="NO" # Set to YES to enable a routing daemon.
221b91ff 227router_program="/sbin/routed" # Name of routing daemon to use if enabled.
984263bc 228router_flags="-q" # Flags for routing daemon.
984263bc
MD
229arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
230forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
231accept_sourceroute="NO" # accept source routed packets to us
232
984263bc
MD
233### Miscellaneous network options: ###
234icmp_bmcastecho="NO" # respond to broadcast ping packets
235
236### IPv6 options: ###
237ipv6_enable="NO" # Set to YES to set up for IPv6.
238ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
239ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
240#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
241ipv6_static_routes="" # Set to static route list (or leave empty).
242#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
243 # route toward loopback interface.
244#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
245ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
246ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
221b91ff 247ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
984263bc
MD
248ipv6_router_flags="" # Flags to IPv6 routing daemon.
249#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
250 # addrs.
251#ipv6_router_flags="-q" # If you want to run a routing daemon on an end
252 # node, you should stop advertisement.
253#ipv6_network_interfaces="ed0 ep0" # Examples for router
254 # or static configuration for end node.
255 # Choose correct prefix value.
256#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
257#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
258#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
259#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
260ipv6_default_interface="NO" # Default output interface for scoped addrs.
261 # Now this works only for IPv6 link local
262 # multicast addrs.
263rtadvd_enable="NO" # Set to YES to enable an IPv6 router
264 # advertisement daemon. If set to YES,
265 # this router becomes a possible candidate
266 # IPv6 default router for local subnets.
267rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
ad378d3f
JS
268rtsold_enable="NO" # Set to YES to enable an IPv6 routing
269 # solicitation daemon. This is used for
270 # automatic discovery of non-link local
271 # addresses.
272rtsold_flags="-a" # Do autoprobing of outgoing interface.
984263bc
MD
273stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
274 # tunneling interface. Specify this entry
275 # to enable 6to4 interface.
276stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
277 # to limit peer addr range. Effective value
278 # is 0-31.
279stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
280 # If you like, you can set "AUTO" for this.
281stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
984263bc
MD
282ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
283 # functionality
284ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
285ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
286ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
287ipv6_firewall_logging="NO" # Set to YES to enable events logging
288ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
03137732
AL
289ip6addrctl_enable="YES" # Set to YES to enable default address selection
290ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
291ip6addrctl_policy="AUTO" # A pre-defined address selection policy
292 # (ipv4_prefer, ipv6_prefer, or AUTO)
984263bc
MD
293
294##############################################################
295### System console options #################################
296##############################################################
297
298keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
299keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
9c600e7d 300keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
984263bc
MD
301keychange="NO" # function keys default values (or NO).
302cursor="NO" # cursor type {normal|blink|destructive} (or NO).
303scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
304font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
305font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
306font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
307blanktime="300" # blank time (in seconds) or "NO" to turn it off.
2e7cfdc9 308saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
62c0a8e4 309moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
6a8bb22d 310 # specifically overridden in rc.conf(5).
984263bc
MD
311moused_enable="NO" # Run the mouse daemon.
312moused_type="auto" # See man page for rc.conf(5) for available settings.
313moused_port="/dev/psm0" # Set to your mouse port.
314moused_flags="" # Any additional flags to moused.
9c600e7d 315mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
984263bc
MD
316 # language code table, specify alternative range
317 # start like mousechar_start=3, see vidcontrol(1)
38f96ee6 318vidhistory="" # Set video history buffer size
984263bc
MD
319allscreens_flags="" # Set this vidcontrol mode for all virtual screens
320allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
321
322
323##############################################################
324### Mail Transfer Agent (MTA) options ######################
325##############################################################
326
327mta_start_script="/etc/rc.sendmail"
328 # Script to start your chosen MTA, called by /etc/rc.
329# Settings for /etc/rc.sendmail:
9c600e7d 330sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
984263bc
MD
331sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
332sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
333sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
334 # Flags for localhost-only MTA
335sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
336sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
337sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
338sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
339 # Flags for sendmail_msp_queue daemon.
03e2a3c5 340sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO).
984263bc
MD
341
342
343##############################################################
344### Miscellaneous administrative options ###################
345##############################################################
346
4a8c3632 347mixer_enable="YES" # Manage mixer settings across reboots
984263bc
MD
348cron_enable="YES" # Run the periodic job daemon.
349cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
350cron_flags="" # Which options to pass to the cron daemon.
351lpd_enable="NO" # Run the line printer daemon.
352lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
353lpd_flags="" # Flags to lpd (if enabled).
ed5d5720 354nscd_enable="NO" # Run the nsswitch caching daemon.
e348c2ad
SW
355devd_enable="YES" # Run devd, to trigger programs on device tree changes.
356devd_flags="" # Additional flags for devd(8).
984263bc
MD
357dumpdev="NO" # Device name to crashdump to (or NO).
358dumpdir="/var/crash" # Directory where crash dumps are to be stored
359savecore_flags="" # Used if dumpdev is enabled above, and present.
7fb3111b
AH
360crashinfo_enable="YES" # Automatically generate crash dump summary.
361crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
984263bc
MD
362enable_quotas="NO" # turn on quotas on startup (or NO).
363check_quotas="YES" # Check quotas on startup (or NO).
364accounting_enable="NO" # Turn on process accounting (or NO).
d74b417d 365sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO).
984263bc
MD
366clear_tmp_enable="NO" # Clear /tmp at startup.
367ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
9af692c6 368ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib"
984263bc 369 # shared library search paths
6496b71f
PA
370ldconfig_local_dirs="/usr/local/libdata/ldconfig"
371 # Local directories with ldconfig configuration files.
984263bc
MD
372kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
373update_motd="YES" # update version info in /etc/motd (or NO)
374start_vinum="NO" # set to YES to start vinum
0e132b2a 375udevd_enable="NO" # Run udevd(8) daemon.
370f4859 376udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm).
0e132b2a 377lvm_enable="NO" # Run LVM volume discovery.
7581f51d
MD
378entropy_dir="/var/db/entropy" # Set to NO to disable
379entropy_file="/var/db/entropy/reboot" # Set to NO to disable
ceccfc6b 380entropy_save_sz="16384" # Size of the entropy cache files (in bytes)
af1321ae 381rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
9c600e7d 382dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
842eea5b
SW
383newsyslog_enable="NO" # Run newsyslog at startup.
384newsyslog_flags="" # Flags to newsyslog (if enabled).
b58abc5e
SW
385resident_enable="NO" # Process /etc/resident.conf
386varsym_enable="NO" # Process /etc/varsym.conf
387watchdogd_enable="NO" # Start the software watchdog daemon
388
389##############################################################
390### Jail Configuration #######################################
391##############################################################
392
9c600e7d
MD
393jail_enable="NO" # Set to NO to disable starting of any jails
394jail_list="" # Space separated list of names of jails
9432215f
AHJ
395jail_default_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
396jail_default_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
397jail_default_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
398jail_default_chflags_allow="NO" # Allow altering system files within a jail
399jail_default_raw_sockets_allow="NO" # Allow raw sockets within a jail
b58abc5e
SW
400
401#
402# To use rc's built-in jail infrastructure create entries for
403# each jail, specified in jail_list, with the following variables.
404# NOTES:
405# - replace 'example' with the jail's name.
406# - except rootdir, hostname and ip, all of the following variables may be made
407# global jail variables if you don't specify a jail name (ie. jail_interface).
408#
409#jail_example_rootdir="/usr/jail/default" # Jail's root directory
410#jail_example_hostname="default.domain.com" # Jail's hostname
411#jail_example_ip="192.168.0.10" # Jail's IP number
412#jail_example_interface="" # Interface to create the IP alias on
413#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
414#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
b58abc5e 415#jail_example_procfs_enable="NO" # mount procfs in jail
007ff2f8 416#jail_example_devfs_enable="NO" # mount devfs in jail
b58abc5e
SW
417#jail_example_mount_enable="NO" # mount/umount jail's fs
418#jail_example_fstab="" # fstab(5) for mount/umount
419#jail_example_flags="-l -U root" # flags for jail(8)
984263bc 420
26b35e7c 421##############################################################
7f180e19 422### VFS quota options #######################################
26b35e7c
FT
423##############################################################
424
7f180e19
FT
425vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options
426vfs_quota_sync="" # Space separated list of mount points or "NO"
26b35e7c 427
2feb07f7
SW
428##############################################################
429### VKernel options #########################################
430##############################################################
431
432vkernel_enable="NO" # Set to YES to enable starting of vkernels
433vkernel_list="" # Space separated list of names of vkernels
dd7331fe 434#vkernel_bin="/boot/kernel.VKERNEL64" # Default path to the vkernel binary
7c53feed 435#vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued
2feb07f7 436
c4740fdf
AHJ
437vknetd_enable="NO" # Bridged networking
438vknetd_flags="-U" # Bridged networking flags
2feb07f7
SW
439#
440# Create an entry for each vkernel specified in vkernel_list
441# replacing 'example' by the name of the vkernel.
442#
dd7331fe 443#vkernel_example_bin="/boot/kernel.VKERNEL64"
2feb07f7
SW
444 # Path to the vkernel binary
445#vkernel_example_memsize="64m"
446 # Amount of memory for the vkernel
447#vkernel_example_rootimg_list="/var/vkernel/rootimg.01"
448 # Space separated list of disk images
4ade232d
AHJ
449#vkernel_example_memimg="/var/vkernel/memimg.000000"
450 # Optional: Memory image file for vkernel
2feb07f7
SW
451#vkernel_example_iface_list="auto:bridge0"
452 # Optional: space separated list network interfaces for the vkernel
453#vkernel_example_logfile="/dev/null"
454 # Optional: path to the console log file
32733d8d
AHJ
455#vkernel_example_user="root"
456 # Optional: user that will run the vkernel
2feb07f7
SW
457#vkernel_example_flags="-U"
458 # Optional: aditional flags to start the vkernel with
7c53feed
R
459#vkernel_example_kill_timeout="45"
460 # Optional: timeout before SIGKILL is issued when stopping the vkernel
2feb07f7 461
984263bc
MD
462##############################################################
463### Define source_rc_confs, the mechanism used by /etc/rc.* ##
464### scripts to source rc_conf_files overrides safely. ##
465##############################################################
466
467if [ -z "${source_rc_confs_defined}" ]; then
468 source_rc_confs_defined=yes
80d125ea 469 source_rc_confs() {
984263bc
MD
470 local i sourced_files
471 for i in ${rc_conf_files}; do
472 case ${sourced_files} in
473 *:$i:*)
474 ;;
475 *)
476 sourced_files="${sourced_files}:$i:"
477 if [ -r $i ]; then
478 . $i
479 fi
480 ;;
481 esac
482 done
483 }
484fi