Add SC_PIXEL_MODE because it's nice to have higher console resolutions
[dragonfly.git] / sys / config / GENERIC
CommitLineData
984263bc 1#
8611e04d 2# GENERIC -- Generic kernel configuration file for DragonFly/i386
984263bc 3#
43800c56
HP
4# Check the LINT configuration file in sys/i386/conf, for an
5# exhaustive list of options.
984263bc 6#
c42bc832 7# $DragonFly: src/sys/config/GENERIC,v 1.22 2005/01/12 20:20:21 swildner Exp $
984263bc
MD
8
9machine i386
10cpu I386_CPU
11cpu I486_CPU
12cpu I586_CPU
13cpu I686_CPU
14ident GENERIC
15maxusers 0
16
1037a9ff 17makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
984263bc
MD
18
19options MATH_EMULATE #Support for x87 emulation
20options INET #InterNETworking
21options INET6 #IPv6 communications protocols
22options FFS #Berkeley Fast Filesystem
23options FFS_ROOT #FFS usable as root device [keep this!]
24options SOFTUPDATES #Enable FFS soft updates support
25options UFS_DIRHASH #Improve performance on big directories
26options MFS #Memory Filesystem
27options MD_ROOT #MD is a potential root device
28options NFS #Network Filesystem
29options NFS_ROOT #NFS usable as root device, NFS required
30options MSDOSFS #MSDOS Filesystem
31options CD9660 #ISO 9660 Filesystem
32options CD9660_ROOT #CD-ROM usable as root, CD9660 required
33options PROCFS #Process filesystem
34options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
35options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
36options UCONSOLE #Allow users to grab the console
37options USERCONFIG #boot -c editor
38options VISUAL_USERCONFIG #visual boot -c editor
39options KTRACE #ktrace(1) support
40options SYSVSHM #SYSV-style shared memory
41options SYSVMSG #SYSV-style message queues
42options SYSVSEM #SYSV-style semaphores
43options P1003_1B #Posix P1003_1B real-time extensions
44options _KPOSIX_PRIORITY_SCHEDULING
45options ICMP_BANDLIM #Rate limit bad replies
46options KBD_INSTALL_CDEV # install a CDEV entry in /dev
47options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
48 # output. Adds ~128k to driver.
49options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
50 # output. Adds ~215k to driver.
51
52# To make an SMP kernel, the next two are needed
53#options SMP # Symmetric MultiProcessor Kernel
54#options APIC_IO # Symmetric (APIC) I/O
55
1037a9ff 56# Debugging for Development
78990d4c 57options DDB
863c2f64 58options DDB_TRACE
78990d4c
HP
59options INVARIANTS
60options INVARIANT_SUPPORT
1037a9ff
DR
61
62
63
984263bc
MD
64device isa
65device eisa
66device pci
67
68# Floppy drives
69device fdc0 at isa? port IO_FD1 irq 6 drq 2
70device fd0 at fdc0 drive 0
71device fd1 at fdc0 drive 1
72#
73# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
74# don't use the above line for fdc0 but the following one:
75#device fdc0
76
77# ATA and ATAPI devices
78device ata0 at isa? port IO_WD1 irq 14
79device ata1 at isa? port IO_WD2 irq 15
80device ata
81device atadisk # ATA disk drives
82device atapicd # ATAPI CDROM drives
83device atapifd # ATAPI floppy drives
84device atapist # ATAPI tape drives
a3e4c692 85device atapicam # Emulate ATAPI devices as SCSI via CAM
984263bc
MD
86options ATA_STATIC_ID #Static device numbering
87
88# SCSI Controllers
89device ahb # EISA AHA1742 family
90device ahc # AHA2940 and onboard AIC7xxx devices
91device ahd # AHA39320/29320 and onboard AIC79xx devices
92device amd # AMD 53C974 (Tekram DC-390(T))
93device isp # Qlogic family
94device mpt # LSI-Logic MPT/Fusion
95device ncr # NCR/Symbios Logic
96device sym # NCR/Symbios Logic (newer chipsets)
97options SYM_SETUP_LP_PROBE_MAP=0x40
98 # Allow ncr to attach legacy NCR devices when
99 # both sym and ncr are configured
100
101device adv0 at isa?
102device adw
103device bt0 at isa?
104device aha0 at isa?
105device aic0 at isa?
106
107device ncv # NCR 53C500
108device nsp # Workbit Ninja SCSI-3
109device stg # TMC 18C30/18C50
110
111# SCSI peripherals
112device scbus # SCSI bus (required)
113device da # Direct Access (disks)
114device sa # Sequential Access (tape etc)
115device cd # CD
116device pass # Passthrough device (direct SCSI access)
117
118# RAID controllers interfaced to the SCSI subsystem
119device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
120device dpt # DPT Smartcache - See LINT for options!
121device iir # Intel Integrated RAID
122device mly # Mylex AcceleRAID/eXtremeRAID
123device ciss # Compaq SmartRAID 5* series
124
125# RAID controllers
126device aac # Adaptec FSA RAID, Dell PERC2/PERC3
127#device aacp # SCSI passthrough for aac (requires CAM)
128device ida # Compaq Smart RAID
129device amr # AMI MegaRAID
130device mlx # Mylex DAC960 family
2d0f6098 131device twe # 3ware Escalade 7000/8000's
ab443496 132device twa # 3ware Escalade 9000's
b7ebf86e 133device pst # Promise Supertrack
984263bc
MD
134
135# atkbdc0 controls both the keyboard and the PS/2 mouse
136device atkbdc0 at isa? port IO_KBD
137device atkbd0 at atkbdc? irq 1 flags 0x1
138device psm0 at atkbdc? irq 12
139
140device vga0 at isa?
141
142# splash screen/screen saver
143pseudo-device splash
144
145# syscons is the default console driver, resembling an SCO console
146device sc0 at isa? flags 0x100
c42bc832 147options SC_PIXEL_MODE # add support for the raster text mode
984263bc
MD
148
149# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
150#device vt0 at isa?
151#options XSERVER # support for X server on a vt console
152#options FAT_CURSOR # start with block cursor
153# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
154#options PCVT_SCANSET=2 # IBM keyboards are non-std
155
156device agp # support several AGP chipsets
157
158# Floating point support - do not disable.
159device npx0 at nexus? port IO_NPX irq 13
160
161# Power management support (see LINT for more options)
162device apm0 at nexus? disable flags 0x20 # Advanced Power Management
163
164# PCCARD (PCMCIA) support
666d2603
JS
165device pccard
166device cardbus
167device cbb
984263bc
MD
168
169# Serial (COM) ports
170device sio0 at isa? port IO_COM1 flags 0x10 irq 4
171device sio1 at isa? port IO_COM2 irq 3
172device sio2 at isa? disable port IO_COM3 irq 5
173device sio3 at isa? disable port IO_COM4 irq 9
174
175# Parallel port
176device ppc0 at isa? irq 7
177device ppbus # Parallel port bus (required)
178device lpt # Printer
179device plip # TCP/IP over parallel
180device ppi # Parallel port interface device
181#device vpo # Requires scbus and da
182
183
184# PCI Ethernet NICs.
185device de # DEC/Intel DC21x4x (``Tulip'')
186device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
187device txp # 3Com 3cR990 (``Typhoon'')
188device vx # 3Com 3c590, 3c595 (``Vortex'')
189
190# PCI Ethernet NICs that use the common MII bus controller code.
191# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
192device miibus # MII bus support
7f186839 193device bfe # Broadcom BCM440x 10/100 Ethernet
984263bc
MD
194device dc # DEC/Intel 21143 and various workalikes
195device fxp # Intel EtherExpress PRO/100B (82557, 82558)
196device pcn # AMD Am79C97x PCI 10/100 NICs
197device rl # RealTek 8129/8139
3e201bae 198device re # RealTek 8139C+/8169
984263bc
MD
199device sf # Adaptec AIC-6915 (``Starfire'')
200device sis # Silicon Integrated Systems SiS 900/SiS 7016
0db5ca13 201device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
984263bc
MD
202device ste # Sundance ST201 (D-Link DFE-550TX)
203device tl # Texas Instruments ThunderLAN
204device tx # SMC EtherPower II (83c170 ``EPIC'')
205device vr # VIA Rhine, Rhine II
206device wb # Winbond W89C840F
207device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
208device bge # Broadcom BCM570x (``Tigon III'')
209
210# ISA Ethernet NICs.
211# 'device ed' requires 'device miibus'
212device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
213device ex
214device ep
215device fe0 at isa? disable port 0x300
216# Xircom Ethernet
217device xe
acffed4b
JS
218# Generic 802.11 stack, used by wi
219device wlan
984263bc
MD
220# PRISM I IEEE 802.11b wireless NIC.
221device awi
222# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
223# exists only as a PCMCIA device, so there is no ISA attachment needed
224# and resources will always be dynamically assigned by the pccard code.
225device wi
226# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
227# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
228# mode (the factory default). If you set the switches on your ISA
229# card for a manually chosen I/O address and IRQ, you must specify
230# those parameters here.
231device an
232# The probe order of these is presently determined by i386/isa/isa_compat.c.
233device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
234#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
235device lnc0 at isa? disable port 0x280 irq 10 drq 0
236device cs0 at isa? disable port 0x300
237device sn0 at isa? disable port 0x300 irq 10
238
239# Pseudo devices - the number indicates how many units to allocate.
240pseudo-device loop # Network loopback
241pseudo-device ether # Ethernet support
242pseudo-device sl 1 # Kernel SLIP
243pseudo-device ppp 1 # Kernel PPP
244pseudo-device tun # Packet tunnel.
245pseudo-device pty # Pseudo-ttys (telnet etc)
246pseudo-device md # Memory "disks"
247pseudo-device gif # IPv6 and IPv4 tunneling
248pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
249
250# The `bpf' pseudo-device enables the Berkeley Packet Filter.
251# Be aware of the administrative consequences of enabling this!
252pseudo-device bpf #Berkeley packet filter
253
acffed4b
JS
254pseudo-device crypto # core crypto support, used by wlan
255
984263bc
MD
256# USB support
257device uhci # UHCI PCI->USB interface
258device ohci # OHCI PCI->USB interface
259device usb # USB Bus (required)
260device ugen # Generic
261device uhid # "Human Interface Devices"
262device ukbd # Keyboard
263device ulpt # Printer
264device umass # Disks/Mass storage - Requires scbus and da
265device ums # Mouse
266device uscanner # Scanners
267device urio # Diamond Rio MP3 Player
268# USB Ethernet, requires mii
269device aue # ADMtek USB ethernet
270device cue # CATC USB ethernet
271device kue # Kawasaki LSI USB ethernet
272
273# FireWire support
274device firewire # FireWire bus code
275device sbp # SCSI over FireWire (Requires scbus and da)
276device fwe # Ethernet over FireWire (non-standard!)