Fix build breakage occuring when INVARIANTS not defined and introduced

[dragonfly.git] / sys / vfs / hammer / hammer_btree.c

/*
 * Copyright (c) 2007 The DragonFly Project.  All rights reserved.
 * 
 * This code is derived from software contributed to The DragonFly Project
 * by Matthew Dillon <dillon@backplane.com>
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name of The DragonFly Project nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific, prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 * $DragonFly: src/sys/vfs/hammer/hammer_btree.c,v 1.22 2008/01/21 00:00:19 dillon Exp $
 */

/*
 * HAMMER B-Tree index
 *
 * HAMMER implements a modified B+Tree.  In documentation this will
 * simply be refered to as the HAMMER B-Tree.  Basically a HAMMER B-Tree
 * looks like a B+Tree (A B-Tree which stores its records only at the leafs
 * of the tree), but adds two additional boundary elements which describe
 * the left-most and right-most element a node is able to represent.  In
 * otherwords, we have boundary elements at the two ends of a B-Tree node
 * instead of sub-tree pointers.
 *
 * A B-Tree internal node looks like this:
 *
 *	B N N N N N N B   <-- boundary and internal elements
 *       S S S S S S S    <-- subtree pointers
 *
 * A B-Tree leaf node basically looks like this:
 *
 *	L L L L L L L L   <-- leaf elemenets
 *
 * The radix for an internal node is 1 less then a leaf but we get a
 * number of significant benefits for our troubles.
 *
 * The big benefit to using a B-Tree containing boundary information
 * is that it is possible to cache pointers into the middle of the tree
 * and not have to start searches, insertions, OR deletions at the root
 * node.   In particular, searches are able to progress in a definitive
 * direction from any point in the tree without revisting nodes.  This
 * greatly improves the efficiency of many operations, most especially
 * record appends.
 *
 * B-Trees also make the stacking of trees fairly straightforward.
 *
 * SPIKES: Two leaf elements denoting a sub-range of keys may represent
 * a spike, or a recursion into another cluster.  Most standard B-Tree
 * searches traverse spikes.  The ending spike element is range-exclusive
 * and operates like a right-bound.  Thus it may exactly match a record
 * element directly following it.
 *
 * INSERTIONS:  A search performed with the intention of doing
 * an insert will guarantee that the terminal leaf node is not full by
 * splitting full nodes.  Splits occur top-down during the dive down the
 * B-Tree.
 *
 * DELETIONS: A deletion makes no attempt to proactively balance the
 * tree and will recursively remove nodes that become empty.  Empty
 * nodes are not allowed and a deletion may recurse upwards from the leaf.
 * Rather then allow a deadlock a deletion may terminate early by setting
 * an internal node's element's subtree_offset to 0.  The deletion will
 * then be resumed the next time a search encounters the element.
 */
#include "hammer.h"
#include <sys/buf.h>
#include <sys/buf2.h>

static int btree_search(hammer_cursor_t cursor, int flags);
static int btree_split_internal(hammer_cursor_t cursor);
static int btree_split_leaf(hammer_cursor_t cursor);
static int btree_remove(hammer_cursor_t cursor, int depth);
static int btree_remove_deleted_element(hammer_cursor_t cursor);
static int btree_set_parent(hammer_node_t node, hammer_btree_elm_t elm);
static int btree_node_is_almost_full(hammer_node_ondisk_t node);
static int btree_node_is_full(hammer_node_ondisk_t node);
static void hammer_make_separator(hammer_base_elm_t key1,
			hammer_base_elm_t key2, hammer_base_elm_t dest);

/*
 * Iterate records after a search.  The cursor is iterated forwards past
 * the current record until a record matching the key-range requirements
 * is found.  ENOENT is returned if the iteration goes past the ending
 * key. 
 *
 * The iteration is inclusive of key_beg and can be inclusive or exclusive
 * of key_end depending on whether HAMMER_CURSOR_END_INCLUSIVE is set.
 *
 * When doing an as-of search (cursor->asof != 0), key_beg.create_tid
 * and key_beg.delete_tid may be modified by B-Tree functions.
 *
 * cursor->key_beg may or may not be modified by this function during
 * the iteration.  XXX future - in case of an inverted lock we may have
 * to reinitiate the lookup and set key_beg to properly pick up where we
 * left off.
 *
 * NOTE!  EDEADLK *CANNOT* be returned by this procedure.
 */
int
hammer_btree_iterate(hammer_cursor_t cursor)
{
	hammer_node_ondisk_t node;
	hammer_btree_elm_t elm;
	int error;
	int r;
	int s;

	/*
	 * Skip past the current record
	 */
	node = cursor->node->ondisk;
	if (node == NULL)
		return(ENOENT);
	if (cursor->index < node->count && 
	    (cursor->flags & HAMMER_CURSOR_ATEDISK)) {
		++cursor->index;
	}

	/*
	 * Loop until an element is found or we are done.
	 */
	for (;;) {
		/*
		 * We iterate up the tree and then index over one element
		 * while we are at the last element in the current node.
		 *
		 * NOTE: This can pop us up to another cluster.
		 *
		 * If we are at the root of the root cluster, cursor_up
		 * returns ENOENT.
		 *
		 * NOTE: hammer_cursor_up() will adjust cursor->key_beg
		 * when told to re-search for the cluster tag.
		 *
		 * XXX this could be optimized by storing the information in
		 * the parent reference.
		 *
		 * XXX we can lose the node lock temporarily, this could mess
		 * up our scan.
		 */
		if (cursor->index == node->count) {
			error = hammer_cursor_up(cursor);
			if (error)
				break;
			node = cursor->node->ondisk;
			KKASSERT(cursor->index != node->count);
			++cursor->index;
			continue;
		}

		/*
		 * Check internal or leaf element.  Determine if the record
		 * at the cursor has gone beyond the end of our range.
		 *
		 * Generally we recurse down through internal nodes.  An
		 * internal node can only be returned if INCLUSTER is set
		 * and the node represents a cluster-push record.
		 */
		if (node->type == HAMMER_BTREE_TYPE_INTERNAL) {
			elm = &node->elms[cursor->index];
			r = hammer_btree_cmp(&cursor->key_end, &elm[0].base);
			s = hammer_btree_cmp(&cursor->key_beg, &elm[1].base);
			if (hammer_debug_btree) {
				kprintf("BRACKETL %d:%d:%08x[%d] %016llx %02x %016llx %d\n",
					cursor->node->cluster->volume->vol_no,
					cursor->node->cluster->clu_no,
					cursor->node->node_offset,
					cursor->index,
					elm[0].internal.base.obj_id,
					elm[0].internal.base.rec_type,
					elm[0].internal.base.key,
					r
				);
				kprintf("BRACKETR %d:%d:%08x[%d] %016llx %02x %016llx %d\n",
					cursor->node->cluster->volume->vol_no,
					cursor->node->cluster->clu_no,
					cursor->node->node_offset,
					cursor->index + 1,
					elm[1].internal.base.obj_id,
					elm[1].internal.base.rec_type,
					elm[1].internal.base.key,
					s
				);
			}

			if (r < 0) {
				error = ENOENT;
				break;
			}
			if (r == 0 && (cursor->flags &
				       HAMMER_CURSOR_END_INCLUSIVE) == 0) {
				error = ENOENT;
				break;
			}
			KKASSERT(s <= 0);

			/*
			 * When iterating try to clean up any deleted
			 * internal elements left over from btree_remove()
			 * deadlocks, but it is ok if we can't.
			 */
			if (elm->internal.subtree_offset == 0)
				btree_remove_deleted_element(cursor);
			if (elm->internal.subtree_offset != 0) {
				error = hammer_cursor_down(cursor);
				if (error)
					break;
				KKASSERT(cursor->index == 0);
				node = cursor->node->ondisk;
			}
			continue;
		} else {
			elm = &node->elms[cursor->index];
			r = hammer_btree_cmp(&cursor->key_end, &elm->base);
			if (hammer_debug_btree) {
				kprintf("ELEMENT  %d:%d:%08x:%d %c %016llx %02x %016llx %d\n",
					cursor->node->cluster->volume->vol_no,
					cursor->node->cluster->clu_no,
					cursor->node->node_offset,
					cursor->index,
					(elm[0].leaf.base.btype ?
					 elm[0].leaf.base.btype : '?'),
					elm[0].leaf.base.obj_id,
					elm[0].leaf.base.rec_type,
					elm[0].leaf.base.key,
					r
				);
			}
			if (r < 0) {
				error = ENOENT;
				break;
			}
			switch(elm->leaf.base.btype) {
			case HAMMER_BTREE_TYPE_RECORD:
				/*
				 * We support both end-inclusive and
				 * end-exclusive searches.
				 */
				if (r == 0 &&
				    (cursor->flags &
				     HAMMER_CURSOR_END_INCLUSIVE) == 0) {
					error = ENOENT;
					break;
				}
				if ((cursor->flags & HAMMER_CURSOR_ASOF) &&
				    hammer_btree_chkts(cursor->asof, &elm->base)) {
					++cursor->index;
					continue;
				}
				break;
			case HAMMER_BTREE_TYPE_SPIKE_BEG:
				/*
				 * We support both end-inclusive and
				 * end-exclusive searches.
				 *
				 * NOTE: This code assumes that the spike
				 * ending element immediately follows the
				 * spike beginning element.
				 */
				if (r == 0 &&
				    (cursor->flags &
				     HAMMER_CURSOR_END_INCLUSIVE) == 0) {
					error = ENOENT;
					break;
				}
				/*
				 * We must cursor-down via the SPIKE_END
				 * element, otherwise cursor->parent will
				 * not be set correctly for deletions.
				 *
				 * fall-through to avoid an improper
				 * termination from the conditional above.
				 */
				KKASSERT(cursor->index + 1 < node->count);
				++elm;
				KKASSERT(elm->leaf.base.btype ==
					 HAMMER_BTREE_TYPE_SPIKE_END);
				++cursor->index;
				/* fall through */
			case HAMMER_BTREE_TYPE_SPIKE_END:
				/*
				 * The SPIKE_END element is non-inclusive,
				 * just like a boundary, so if we match it
				 * there's no point pushing down.  It is
				 * possible for an exactly matching element
				 * to follow it, however.  Either stop
				 * or continue the iteration.
				 */
				if (r == 0) {
					if ((cursor->flags &
					    HAMMER_CURSOR_END_INCLUSIVE) == 0) {
						error = ENOENT;
						break;
					}
					continue;
				}

				if (cursor->flags & HAMMER_CURSOR_INCLUSTER)
					break;
				error = hammer_cursor_down(cursor);
				if (error)
					break;
				KKASSERT(cursor->index == 0);
				node = cursor->node->ondisk;
				continue;
			default:
				error = EINVAL;
				break;
			}
			if (error)
				break;
		}

		/*
		 * Return entry
		 */
		if (hammer_debug_btree) {
			int i = cursor->index;
			hammer_btree_elm_t elm = &cursor->node->ondisk->elms[i];
			kprintf("ITERATE  %p:%d %016llx %02x %016llx\n",
				cursor->node, i,
				elm->internal.base.obj_id,
				elm->internal.base.rec_type,
				elm->internal.base.key
			);
		}
		return(0);
	}
	return(error);
}

/*
 * Lookup cursor->key_beg.  0 is returned on success, ENOENT if the entry
 * could not be found, EDEADLK if inserting and a retry is needed, and a
 * fatal error otherwise.  When retrying, the caller must terminate the
 * cursor and reinitialize it.  EDEADLK cannot be returned if not inserting.
 * 
 * The cursor is suitably positioned for a deletion on success, and suitably
 * positioned for an insertion on ENOENT if HAMMER_CURSOR_INSERT was
 * specified.
 *
 * The cursor may begin anywhere, the search will traverse clusters in
 * either direction to locate the requested element.
 *
 * Most of the logic implementing historical searches is handled here.  We
 * do an initial lookup with delete_tid set to the asof TID.  Due to the
 * way records are laid out, a forwards iteration may be required if
 * ENOENT is returned to locate the historical record.  Here's the
 * problem:
 *
 * delete_tid:    10      15       20
 *		     LEAF1   LEAF2
 * records:         (11)        (18)
 *
 * Lets say we want to do a lookup AS-OF timestamp 12.  We will traverse
 * LEAF1 but the only record in LEAF1 has a termination (delete_tid) of 11,
 * thus causing ENOENT to be returned.  We really need to check record 18
 * in LEAF2.  If it also fails then the search fails (e.g. it might represent
 * the range 14-18 and thus still not match our AS-OF timestamp of 12).
 */
int
hammer_btree_lookup(hammer_cursor_t cursor)
{
	int error;

	if (cursor->flags & HAMMER_CURSOR_ASOF) {
		KKASSERT((cursor->flags & HAMMER_CURSOR_INSERT) == 0);

		cursor->key_beg.delete_tid = cursor->asof;
		for (;;) {
			error = btree_search(cursor, 0);
			if (error != ENOENT)
				break;

			/*
			 * ENOENT needs special handling, we may have gone
			 * the tree to the left of a matching record because
			 * any record with (delete_tid > asof) can potentially
			 * match.
			 *
			 * If we are AT a non-matching record we can stop,
			 * but if we are at a right-edge we have to loop.
			 * Since deletions don't always succeed completely
			 * we can wind up going through several empty nodes.
			 *
			 * NOTE: we can be at a leaf OR an internal node
			 * here, because we aren't inserting.
			 */
			if (cursor->index != cursor->node->ondisk->count)
				break;
			if (cursor->key_beg.obj_id !=
				cursor->right_bound->obj_id ||
			    cursor->key_beg.rec_type !=
				cursor->right_bound->rec_type ||
			    cursor->key_beg.key !=
				cursor->right_bound->key
			) {
				break;
			}
			cursor->key_beg.delete_tid =
				cursor->right_bound->delete_tid;
			/* loop */
		}
	} else {
		error = btree_search(cursor, 0);
	}
	if (error == 0 && cursor->flags)
		error = hammer_btree_extract(cursor, cursor->flags);
	return(error);
}

/*
 * Execute the logic required to start an iteration.  The first record
 * located within the specified range is returned and iteration control
 * flags are adjusted for successive hammer_btree_iterate() calls.
 */
int
hammer_btree_first(hammer_cursor_t cursor)
{
	int error;

	error = hammer_btree_lookup(cursor);
	if (error == ENOENT) {
		cursor->flags &= ~HAMMER_CURSOR_ATEDISK;
		error = hammer_btree_iterate(cursor);
	}
	cursor->flags |= HAMMER_CURSOR_ATEDISK;
	return(error);
}

/*
 * Extract the record and/or data associated with the cursor's current
 * position.  Any prior record or data stored in the cursor is replaced.
 * The cursor must be positioned at a leaf node.
 *
 * NOTE: Most extractions occur at the leaf of the B-Tree.  The only
 * 	 extraction allowed at an internal element is at a cluster-push.
 *	 Cluster-push elements have records but no data.
 */
int
hammer_btree_extract(hammer_cursor_t cursor, int flags)
{
	hammer_node_ondisk_t node;
	hammer_btree_elm_t elm;
	hammer_cluster_t cluster;
	u_int64_t buf_type;
	int32_t cloff;
	int32_t roff;
	int error;

	/*
	 * A cluster record type has no data reference, the information
	 * is stored directly in the record and B-Tree element.
	 *
	 * The case where the data reference resolves to the same buffer
	 * as the record reference must be handled.
	 */
	node = cursor->node->ondisk;
	elm = &node->elms[cursor->index];
	cluster = cursor->node->cluster;
	cursor->flags &= ~HAMMER_CURSOR_DATA_EMBEDDED;
	cursor->data = NULL;

	/*
	 * There is nothing to extract for an internal element.
	 */
	if (node->type == HAMMER_BTREE_TYPE_INTERNAL)
		return(EINVAL);

	KKASSERT(node->type == HAMMER_BTREE_TYPE_LEAF);

	/*
	 * Leaf element.
	 */
	if ((flags & HAMMER_CURSOR_GET_RECORD)) {
		cloff = elm->leaf.rec_offset;
		cursor->record = hammer_bread(cluster, cloff,
					      HAMMER_FSBUF_RECORDS, &error,
					      &cursor->record_buffer);
	} else {
		cloff = 0;
		error = 0;
	}
	if ((flags & HAMMER_CURSOR_GET_DATA) && error == 0) {
		if (elm->leaf.base.btype != HAMMER_BTREE_TYPE_RECORD) {
			/*
			 * Only records have data references.  Spike elements
			 * do not.
			 */
			cursor->data = NULL;
		} else if ((cloff ^ elm->leaf.data_offset) & ~HAMMER_BUFMASK) {
			/*
			 * The data is not in the same buffer as the last
			 * record we cached, but it could still be embedded
			 * in a record.  Note that we may not have loaded the
			 * record's buffer above, depending on flags.
			 */
			if ((elm->leaf.rec_offset ^ elm->leaf.data_offset) &
			    ~HAMMER_BUFMASK) {
				if (elm->leaf.data_len & HAMMER_BUFMASK)
					buf_type = HAMMER_FSBUF_DATA;
				else
					buf_type = 0;	/* pure data buffer */
			} else {
				buf_type = HAMMER_FSBUF_RECORDS;
			}
			cursor->data = hammer_bread(cluster,
						  elm->leaf.data_offset,
						  buf_type, &error,
						  &cursor->data_buffer);
		} else {
			/*
			 * Data in same buffer as record.  Note that we
			 * leave any existing data_buffer intact, even
			 * though we don't use it in this case, in case
			 * other records extracted during an iteration
			 * go back to it.
			 *
			 * The data must be embedded in the record for this
			 * case to be hit.
			 *
			 * Just assume the buffer type is correct.
			 */
			cursor->data = (void *)
				((char *)cursor->record_buffer->ondisk +
				 (elm->leaf.data_offset & HAMMER_BUFMASK));
			roff = (char *)cursor->data - (char *)cursor->record;
			KKASSERT (roff >= 0 && roff < HAMMER_RECORD_SIZE);
			cursor->flags |= HAMMER_CURSOR_DATA_EMBEDDED;
		}
	}
	return(error);
}


/*
 * Insert a leaf element into the B-Tree at the current cursor position.
 * The cursor is positioned such that the element at and beyond the cursor
 * are shifted to make room for the new record.
 *
 * The caller must call hammer_btree_lookup() with the HAMMER_CURSOR_INSERT
 * flag set and that call must return ENOENT before this function can be
 * called.
 *
 * ENOSPC is returned if there is no room to insert a new record.
 */
int
hammer_btree_insert(hammer_cursor_t cursor, hammer_btree_elm_t elm)
{
	hammer_node_ondisk_t node;
	int i;
	int error;

	if ((error = hammer_cursor_upgrade(cursor)) != 0)
		return(error);

	/*
	 * Insert the element at the leaf node and update the count in the
	 * parent.  It is possible for parent to be NULL, indicating that
	 * the root of the B-Tree in the cluster is a leaf.  It is also
	 * possible for the leaf to be empty.
	 *
	 * Remember that the right-hand boundary is not included in the
	 * count.
	 */
	hammer_modify_node(cursor->node);
	node = cursor->node->ondisk;
	i = cursor->index;
	KKASSERT(elm->base.btype != 0);
	KKASSERT(node->type == HAMMER_BTREE_TYPE_LEAF);
	KKASSERT(node->count < HAMMER_BTREE_LEAF_ELMS);
	if (i != node->count) {
		bcopy(&node->elms[i], &node->elms[i+1],
		      (node->count - i) * sizeof(*elm));
	}
	node->elms[i] = *elm;
	++node->count;

	/*
	 * Debugging sanity checks.  Note that the element to the left
	 * can match the element we are inserting if it is a SPIKE_END,
	 * because spike-end's represent a non-inclusive end to a range.
	 */
	KKASSERT(hammer_btree_cmp(cursor->left_bound, &elm->leaf.base) <= 0);
	KKASSERT(hammer_btree_cmp(cursor->right_bound, &elm->leaf.base) > 0);
	if (i) {
		if (node->elms[i-1].base.btype == HAMMER_BTREE_TYPE_SPIKE_END){
			KKASSERT(hammer_btree_cmp(&node->elms[i-1].leaf.base, &elm->leaf.base) <= 0);
		} else {
			KKASSERT(hammer_btree_cmp(&node->elms[i-1].leaf.base, &elm->leaf.base) < 0);
		}
	}
	if (i != node->count - 1)
		KKASSERT(hammer_btree_cmp(&node->elms[i+1].leaf.base, &elm->leaf.base) > 0);

	return(0);
}

/*
 * Insert a cluster spike into the B-Tree at the current cursor position.
 * The caller pre-positions the insertion cursor at ncluster's
 * left bound in the originating cluster.  Both the originating cluster
 * and the target cluster must be serialized, EDEADLK is fatal.
 *
 * Basically we have to lay down the two spike elements and assert that
 * the leaf's right bound does not bisect the ending element.  The ending
 * spike element is non-inclusive, just like a boundary.
 *
 * NOTE: Serialization is usually accoplished by virtue of being the
 * initial accessor of a cluster.
 */
int
hammer_btree_insert_cluster(hammer_cursor_t cursor, hammer_cluster_t ncluster,
			    int32_t rec_offset)
{
	hammer_node_ondisk_t node;
	hammer_btree_elm_t   elm;
	const int esize = sizeof(*elm);
	int error;
	int i;

	if ((error = hammer_cursor_upgrade(cursor)) != 0)
		return(error);
	hammer_modify_node(cursor->node);
	hammer_modify_cluster(ncluster);
	node = cursor->node->ondisk;
	i = cursor->index;

	KKASSERT(node->type == HAMMER_BTREE_TYPE_LEAF);
	KKASSERT(node->count <= HAMMER_BTREE_LEAF_ELMS - 2);
	KKASSERT(i >= 0 && i <= node->count);

	/*
	 * Make sure the spike is legal or the B-Tree code will get really
	 * confused.
	 *
	 * XXX the right bound my bisect the two spike elements.  We
	 * need code here to 'fix' the right bound going up the tree
	 * instead of an assertion.
	 */
	KKASSERT(hammer_btree_cmp(&ncluster->ondisk->clu_btree_beg,
				  cursor->left_bound) >= 0);
	KKASSERT(hammer_btree_cmp(&ncluster->ondisk->clu_btree_end,
				  cursor->right_bound) <= 0);
	if (i != node->count) {
		KKASSERT(hammer_btree_cmp(&ncluster->ondisk->clu_btree_end,
					  &node->elms[i].leaf.base) <= 0);
	}

	ncluster->ondisk->clu_btree_parent_offset = cursor->node->node_offset;

	elm = &node->elms[i];
	bcopy(elm, elm + 2, (node->count - i) * esize);
	bzero(elm, 2 * esize);
	node->count += 2;

	elm[0].leaf.base = ncluster->ondisk->clu_btree_beg;
	elm[0].leaf.base.btype = HAMMER_BTREE_TYPE_SPIKE_BEG;
	elm[0].leaf.spike_clu_no = ncluster->clu_no;
	elm[0].leaf.spike_vol_no = ncluster->volume->vol_no;

	elm[1].leaf.base = ncluster->ondisk->clu_btree_end;
	elm[1].leaf.base.btype = HAMMER_BTREE_TYPE_SPIKE_END;
	elm[1].leaf.spike_clu_no = ncluster->clu_no;
	elm[1].leaf.spike_vol_no = ncluster->volume->vol_no;
	return(0);
}

/*
 * Delete a record from the B-Tree at the current cursor position.
 * The cursor is positioned such that the current element is the one
 * to be deleted.
 *
 * On return the cursor will be positioned after the deleted element and
 * MAY point to an internal node.  It will be suitable for the continuation
 * of an iteration but not for an insertion or deletion.
 *
 * Deletions will attempt to partially rebalance the B-Tree in an upward
 * direction, but will terminate rather then deadlock.  Empty leaves are
 * not allowed except at the root node of a cluster.  An early termination
 * will leave an internal node with an element whos subtree_offset is 0,
 * a case detected and handled by btree_search().
 */
int
hammer_btree_delete(hammer_cursor_t cursor)
{
	hammer_node_ondisk_t ondisk;
	hammer_node_t node;
	hammer_node_t parent;
	int error;
	int i;

	if ((error = hammer_cursor_upgrade(cursor)) != 0)
		return(error);

	/*
	 * Delete the element from the leaf node. 
	 *
	 * Remember that leaf nodes do not have boundaries.
	 */
	node = cursor->node;
	ondisk = node->ondisk;
	i = cursor->index;

	KKASSERT(ondisk->type == HAMMER_BTREE_TYPE_LEAF);
	KKASSERT(i >= 0 && i < ondisk->count);
	hammer_modify_node(node);
	if (i + 1 != ondisk->count) {
		bcopy(&ondisk->elms[i+1], &ondisk->elms[i],
		      (ondisk->count - i - 1) * sizeof(ondisk->elms[0]));
	}
	--ondisk->count;

	/*
	 * Validate local parent
	 */
	if (ondisk->parent) {
		parent = cursor->parent;

		KKASSERT(parent != NULL);
		KKASSERT(parent->node_offset == ondisk->parent);
		KKASSERT(parent->cluster == node->cluster);
	}

	/*
	 * If the leaf becomes empty it must be detached from the parent,
	 * potentially recursing through to the cluster root.
	 *
	 * This may reposition the cursor at one of the parent's of the
	 * current node.
	 *
	 * Ignore deadlock errors, that simply means that btree_remove
	 * was unable to recurse and had to leave the subtree_offset 
	 * in the parent set to 0.
	 */
	KKASSERT(cursor->index <= ondisk->count);
	if (ondisk->count == 0) {
		do {
			error = btree_remove(cursor, 0);
		} while (error == EAGAIN);
		if (error == EDEADLK)
			error = 0;
	} else {
		error = 0;
	}
	KKASSERT(cursor->parent == NULL ||
		 cursor->parent_index < cursor->parent->ondisk->count);
	return(error);
}

/*
 * PRIMAY B-TREE SEARCH SUPPORT PROCEDURE
 *
 * Search a cluster's B-Tree for cursor->key_beg, return the matching node.
 *
 * The search can begin ANYWHERE in the B-Tree.  As a first step the search
 * iterates up the tree as necessary to properly position itself prior to
 * actually doing the sarch.
 * 
 * INSERTIONS: The search will split full nodes and leaves on its way down
 * and guarentee that the leaf it ends up on is not full.  If we run out
 * of space the search continues to the leaf (to position the cursor for
 * the spike), but ENOSPC is returned.
 *
 * The search is only guarenteed to end up on a leaf if an error code of 0
 * is returned, or if inserting and an error code of ENOENT is returned.
 * Otherwise it can stop at an internal node.  On success a search returns
 * a leaf node unless INCLUSTER is set and the search located a cluster push
 * node (which is an internal node).
 *
 * COMPLEXITY WARNING!  This is the core B-Tree search code for the entire
 * filesystem, and it is not simple code.  Please note the following facts:
 *
 * - Internal node recursions have a boundary on the left AND right.  The
 *   right boundary is non-inclusive.  The delete_tid is a generic part
 *   of the key for internal nodes.
 *
 * - Leaf nodes contain terminal elements AND spikes.  A spike recurses into
 *   another cluster and contains two leaf elements.. a beginning and an
 *   ending element.  The SPIKE_END element is RANGE-EXCLUSIVE, just like a
 *   boundary.  This means that it is possible to have two elements 
 *   (a spike ending element and a record) side by side with the same key.
 *
 * - Because the SPIKE_END element is range exclusive, it can match the
 *   right boundary of the parent node.  SPIKE_BEG and SPIKE_END elements
 *   always come in pairs, and always exist side by side in the same leaf.
 *
 * - Filesystem lookups typically set HAMMER_CURSOR_ASOF, indicating a
 *   historical search.  This is true for current lookups too.  Raw B-Tree
 *   operations such as insertions and recovery scans typically do NOT
 *   set this flag.  When the flag is not set, create_tid and delete_tid
 *   are considered to be a generic part of the key for internal nodes.
 *
 *   When the flag IS set the search code must check whether the record
 *   is actually visible to the search or not.  btree_lookup() will also
 *   use failed results to poke around if necessary to locate the correct
 *   record.
 */
static 
int
btree_search(hammer_cursor_t cursor, int flags)
{
	hammer_node_ondisk_t node;
	hammer_cluster_t cluster;
	hammer_btree_elm_t elm;
	int error;
	int enospc = 0;
	int i;
	int r;

	flags |= cursor->flags;

	if (hammer_debug_btree) {
		kprintf("SEARCH   %d:%d:%08x[%d] %016llx %02x key=%016llx did=%016llx\n",
			cursor->node->cluster->volume->vol_no,
			cursor->node->cluster->clu_no,
			cursor->node->node_offset, 
			cursor->index,
			cursor->key_beg.obj_id,
			cursor->key_beg.rec_type,
			cursor->key_beg.key,
			cursor->key_beg.delete_tid
		);
	}

	/*
	 * Move our cursor up the tree until we find a node whos range covers
	 * the key we are trying to locate.  This may move us between
	 * clusters.
	 *
	 * The left bound is inclusive, the right bound is non-inclusive.
	 * It is ok to cursor up too far so when cursoring across a cluster
	 * boundary.
	 *
	 * First see if we can skip the whole cluster.  hammer_cursor_up()
	 * handles both cases but this way we don't check the cluster
	 * bounds when going up the tree within a cluster.
	 *
	 * NOTE: If INCLUSTER is set and we are at the root of the cluster,
	 * hammer_cursor_up() will return ENOENT.
	 */
	cluster = cursor->node->cluster;
	while (
	    hammer_btree_cmp(&cursor->key_beg, &cluster->clu_btree_beg) < 0 ||
	    hammer_btree_cmp(&cursor->key_beg, &cluster->clu_btree_end) >= 0) {
		error = hammer_cursor_toroot(cursor);
		if (error)
			goto done;
		KKASSERT(cursor->parent);
		error = hammer_cursor_up(cursor);
		if (error)
			goto done;
		cluster = cursor->node->cluster;
	}

	/*
	 * Deal with normal cursoring within a cluster.  The right bound
	 * is non-inclusive.  That is, the bounds form a separator.
	 */
	while (hammer_btree_cmp(&cursor->key_beg, cursor->left_bound) < 0 ||
	       hammer_btree_cmp(&cursor->key_beg, cursor->right_bound) >= 0) {
		KKASSERT(cursor->parent);
		error = hammer_cursor_up(cursor);
		if (error)
			goto done;
	}

	/*
	 * We better have ended up with a node somewhere, and our second
	 * while loop had better not have traversed up a cluster.
	 */
	KKASSERT(cursor->node != NULL && cursor->node->cluster == cluster);

	/*
	 * If we are inserting we can't start at a full node if the parent
	 * is also full (because there is no way to split the node),
	 * continue running up the tree until we hit the root of the
	 * root cluster or until the requirement is satisfied.
	 *
	 * NOTE: These cursor-up's CAN continue to cross cluster boundaries.
	 *
	 * NOTE: We must guarantee at least two open spots in the parent
	 *       to deal with hammer_btree_insert_cluster().
	 *
	 * XXX as an optimization it should be possible to unbalance the tree
	 * and stop at the root of the current cluster.
	 */
	while ((flags & HAMMER_CURSOR_INSERT) && enospc == 0) {
		if (cursor->node->ondisk->type == HAMMER_BTREE_TYPE_INTERNAL) {
			if (btree_node_is_full(cursor->node->ondisk) == 0)
				break;
		} else {
			if (btree_node_is_almost_full(cursor->node->ondisk) ==0)
				break;
		}
		if (cursor->parent == NULL)
			break;
		if (cursor->parent->ondisk->count != HAMMER_BTREE_INT_ELMS)
			break;
		error = hammer_cursor_up(cursor);
		/* cluster and node are now may become stale */
		if (error)
			goto done;
	}
	/* cluster = cursor->node->cluster; not needed until next cluster = */

new_cluster:
	/*
	 * Push down through internal nodes to locate the requested key.
	 */
	cluster = cursor->node->cluster;
	node = cursor->node->ondisk;
	while (node->type == HAMMER_BTREE_TYPE_INTERNAL) {
		/*
		 * Scan the node to find the subtree index to push down into.
		 * We go one-past, then back-up.
		 *
		 * We must proactively remove deleted elements which may
		 * have been left over from a deadlocked btree_remove().
		 *
		 * The left and right boundaries are included in the loop
		 * in order to detect edge cases.
		 *
		 * If the separator only differs by delete_tid (r == -1)
		 * and we are doing an as-of search, we may end up going
		 * down a branch to the left of the one containing the
		 * desired key.  This requires numerous special cases.
		 */
		for (i = 0; i <= node->count; ++i) {
			elm = &node->elms[i];
			r = hammer_btree_cmp(&cursor->key_beg, &elm->base);
			if (r < 0)
				break;
		}
		if (hammer_debug_btree) {
			kprintf("SEARCH-I %d:%d:%08x pre-i %d/%d\n",
				cursor->node->cluster->volume->vol_no,
				cursor->node->cluster->clu_no,
				cursor->node->node_offset,
				i, node->count);
		}

		/*
		 * These cases occur when the parent's idea of the boundary
		 * is wider then the child's idea of the boundary, and
		 * require special handling.  If not inserting we can
		 * terminate the search early for these cases but the
		 * child's boundaries cannot be unconditionally modified.
		 */
		if (i == 0) {
			/*
			 * If i == 0 the search terminated to the LEFT of the
			 * left_boundary but to the RIGHT of the parent's left
			 * boundary.
			 */
			u_int8_t save;

			elm = &node->elms[0];

			/*
			 * If we aren't inserting we can stop here.
			 */
			if ((flags & HAMMER_CURSOR_INSERT) == 0) {
				cursor->index = 0;
				return(ENOENT);
			}

			/*
			 * Correct a left-hand boundary mismatch.
			 *
			 * We can only do this if we can upgrade the lock.
			 */
			if ((error = hammer_cursor_upgrade(cursor)) != 0)
				return(error);
			hammer_modify_node(cursor->node);
			save = node->elms[0].base.btype;
			node->elms[0].base = *cursor->left_bound;
			node->elms[0].base.btype = save;
		} else if (i == node->count + 1) {
			/*
			 * If i == node->count + 1 the search terminated to
			 * the RIGHT of the right boundary but to the LEFT
			 * of the parent's right boundary.  If we aren't
			 * inserting we can stop here.
			 *
			 * Note that the last element in this case is
			 * elms[i-2] prior to adjustments to 'i'.
			 */
			--i;
			if ((flags & HAMMER_CURSOR_INSERT) == 0) {
				cursor->index = i;
				return (ENOENT);
			}

			/*
			 * Correct a right-hand boundary mismatch.
			 * (actual push-down record is i-2 prior to
			 * adjustments to i).
			 *
			 * We can only do this if we can upgrade the lock.
			 */
			if ((error = hammer_cursor_upgrade(cursor)) != 0)
				return(error);
			elm = &node->elms[i];
			hammer_modify_node(cursor->node);
			elm->base = *cursor->right_bound;
			--i;
		} else {
			/*
			 * The push-down index is now i - 1.  If we had
			 * terminated on the right boundary this will point
			 * us at the last element.
			 */
			--i;
		}
		cursor->index = i;
		elm = &node->elms[i];

		if (hammer_debug_btree) {
			kprintf("SEARCH-I %d:%d:%08x[%d] %016llx %02x key=%016llx did=%016llx\n",
				cursor->node->cluster->volume->vol_no,
				cursor->node->cluster->clu_no,
				cursor->node->node_offset,
				i,
				elm->internal.base.obj_id,
				elm->internal.base.rec_type,
				elm->internal.base.key,
				elm->internal.base.delete_tid
			);
		}

		/*
		 * When searching try to clean up any deleted
		 * internal elements left over from btree_remove()
		 * deadlocks.
		 *
		 * If we fail and we are doing an insertion lookup,
		 * we have to return EDEADLK, because an insertion lookup
		 * must terminate at a leaf.
		 */
		if (elm->internal.subtree_offset == 0) {
			error = btree_remove_deleted_element(cursor);
			if (error == 0)
				goto new_cluster;
			if (error == EDEADLK &&
			    (flags & HAMMER_CURSOR_INSERT) == 0) {
				error = ENOENT;
			}
			return(error);
		}


		/*
		 * Handle insertion and deletion requirements.
		 *
		 * If inserting split full nodes.  The split code will
		 * adjust cursor->node and cursor->index if the current
		 * index winds up in the new node.
		 *
		 * If inserting and a left or right edge case was detected,
		 * we cannot correct the left or right boundary and must
		 * prepend and append an empty leaf node in order to make
		 * the boundary correction.
		 *
		 * If we run out of space we set enospc and continue on
		 * to a leaf to provide the spike code with a good point
		 * of entry.  Enospc is reset if we cross a cluster boundary.
		 */
		if ((flags & HAMMER_CURSOR_INSERT) && enospc == 0) {
			if (btree_node_is_full(node)) {
				error = btree_split_internal(cursor);
				if (error) {
					if (error != ENOSPC)
						goto done;
					enospc = 1;
				}
				/*
				 * reload stale pointers
				 */
				i = cursor->index;
				node = cursor->node->ondisk;
			}
		}

		/*
		 * Push down (push into new node, existing node becomes
		 * the parent) and continue the search.
		 */
		error = hammer_cursor_down(cursor);
		/* node and cluster become stale */
		if (error)
			goto done;
		node = cursor->node->ondisk;
		cluster = cursor->node->cluster;
	}

	/*
	 * We are at a leaf, do a linear search of the key array.
	 *
	 * If we encounter a spike element type within the necessary
	 * range we push into it.  Note that SPIKE_END is non-inclusive
	 * of the spike range.
	 *
	 * On success the index is set to the matching element and 0
	 * is returned.
	 *
	 * On failure the index is set to the insertion point and ENOENT
	 * is returned.
	 *
	 * Boundaries are not stored in leaf nodes, so the index can wind
	 * up to the left of element 0 (index == 0) or past the end of
	 * the array (index == node->count).
	 */
	KKASSERT (node->type == HAMMER_BTREE_TYPE_LEAF);
	KKASSERT(node->count <= HAMMER_BTREE_LEAF_ELMS);

	for (i = 0; i < node->count; ++i) {
		elm = &node->elms[i];

		r = hammer_btree_cmp(&cursor->key_beg, &elm->leaf.base);

		if (hammer_debug_btree > 1)
			kprintf("  ELM %p %d r=%d\n", &node->elms[i], i, r);

		if (elm->leaf.base.btype == HAMMER_BTREE_TYPE_SPIKE_BEG) {
			/*
			 * SPIKE_BEG.  Stop if we are to the left of the
			 * spike begin element.
			 *
			 * If we are not the last element in the leaf continue
			 * the loop looking for the SPIKE_END.  If we are
			 * the last element, however, then push into the
			 * spike.
			 *
			 * If doing an as-of search a Spike demark on a
			 * delete_tid boundary must be pushed into and an
			 * iteration will be forced if it turned out to be
			 * the wrong choice.
			 *
			 * If not doing an as-of search exact comparisons
			 * must be used.
			 *
			 * enospc must be reset because we have crossed a
			 * cluster boundary.
			 */
			if (r < 0)
				goto failed;
			if (i != node->count - 1)
				continue;
			panic("btree_search: illegal spike, no SPIKE_END "
			      "in leaf node! %p\n", cursor->node);
#if 0
			/*
			 * XXX This is not currently legal, you can only
			 * cursor_down() from a SPIKE_END element, otherwise
			 * the cursor parent is pointing at the wrong element
			 * for deletions.
			 */
			if (flags & HAMMER_CURSOR_INCLUSTER)
				goto success;
			cursor->index = i;
			error = hammer_cursor_down(cursor);
			enospc = 0;
			if (error)
				goto done;
			goto new_cluster;
#endif
		}
		if (elm->leaf.base.btype == HAMMER_BTREE_TYPE_SPIKE_END) {
			/*
			 * SPIKE_END.  We can only hit this case if we are
			 * greater or equal to SPIKE_BEG.
			 *
			 * If we are less then SPIKE_END we must push into
			 * it, otherwise continue the search.  The SPIKE_END
			 * element is range-exclusive and because of that
			 * it is possible for it's key to match the next
			 * record on the right.
			 *
			 * enospc must be reset because we have crossed a
			 * cluster boundary.
			 */
			if (r >= 0)
				continue;
			if (flags & HAMMER_CURSOR_INCLUSTER)
				goto success;
			cursor->index = i;
			error = hammer_cursor_down(cursor);
			enospc = 0;
			if (error)
				goto done;
			goto new_cluster;
		}

		/*
		 * We are at a record element.  Stop if we've flipped past
		 * key_beg, not counting the delete_tid test.
		 */
		KKASSERT (elm->leaf.base.btype == HAMMER_BTREE_TYPE_RECORD);

		if (r < -1)
			goto failed;
		if (r > 0)
			continue;

		/*
		 * Check our as-of timestamp against the element.   A
		 * delete_tid that matches exactly in an as-of search
		 * is actually a no-match (the record was deleted as-of
		 * our timestamp so it isn't visible).
		 */
		if (flags & HAMMER_CURSOR_ASOF) {
			if (hammer_btree_chkts(cursor->asof,
					       &node->elms[i].base) != 0) {
				continue;
			}
			/* success */
		} else {
			if (r < 0)	/* can only be -1 */
				goto failed;
			/* success */
		}
success:
		cursor->index = i;
		error = 0;
		if (hammer_debug_btree) {
			kprintf("SEARCH-L %d:%d:%08x[%d] (SUCCESS)\n",
				cursor->node->cluster->volume->vol_no,
				cursor->node->cluster->clu_no,
				cursor->node->node_offset,
				i);
		}
		goto done;
	}

	/*
	 * The search of the leaf node failed.  i is the insertion point.
	 */
failed:
	if (hammer_debug_btree) {
		kprintf("SEARCH-L %d:%d:%08x[%d] (FAILED)\n",
			cursor->node->cluster->volume->vol_no,
			cursor->node->cluster->clu_no,
			cursor->node->node_offset,
			i);
	}

	/*
	 * No exact match was found, i is now at the insertion point.
	 *
	 * If inserting split a full leaf before returning.  This
	 * may have the side effect of adjusting cursor->node and
	 * cursor->index.
	 *
	 * For now the leaf must have at least 2 free elements to accomodate
	 * the insertion of a spike during recovery.  See the
	 * hammer_btree_insert_cluster() function.
	 */
	cursor->index = i;
	if ((flags & HAMMER_CURSOR_INSERT) && enospc == 0 &&
	     btree_node_is_almost_full(node)) {
		error = btree_split_leaf(cursor);
		if (error) {
			if (error != ENOSPC)
				goto done;
			enospc = 1;
		}
		/*
		 * reload stale pointers
		 */
		/* NOT USED
		i = cursor->index;
		node = &cursor->node->internal;
		*/
	}

	/*
	 * We reached a leaf but did not find the key we were looking for.
	 * If this is an insert we will be properly positioned for an insert
	 * (ENOENT) or spike (ENOSPC) operation.
	 */
	error = enospc ? ENOSPC : ENOENT;
done:
	return(error);
}


/************************************************************************
 *			   SPLITTING AND MERGING 			*
 ************************************************************************
 *
 * These routines do all the dirty work required to split and merge nodes.
 */

/*
 * Split an internal node into two nodes and move the separator at the split
 * point to the parent.
 *
 * (cursor->node, cursor->index) indicates the element the caller intends
 * to push into.  We will adjust node and index if that element winds
 * up in the split node.
 *
 * If we are at the root of a cluster a new root must be created with two
 * elements, one pointing to the original root and one pointing to the
 * newly allocated split node.
 *
 * NOTE! Being at the root of a cluster is different from being at the
 * root of the root cluster.  cursor->parent will not be NULL and
 * cursor->node->ondisk.parent must be tested against 0.  Theoretically
 * we could propogate the algorithm into the parent and deal with multiple
 * 'roots' in the cluster header, but it's easier not to.
 */
static
int
btree_split_internal(hammer_cursor_t cursor)
{
	hammer_node_ondisk_t ondisk;
	hammer_node_t node;
	hammer_node_t parent;
	hammer_node_t new_node;
	hammer_btree_elm_t elm;
	hammer_btree_elm_t parent_elm;
	int parent_index;
	int made_root;
	int split;
	int error;
	int i;
	const int esize = sizeof(*elm);

	if ((error = hammer_cursor_upgrade(cursor)) != 0)
		return(error);

	/* 
	 * We are splitting but elms[split] will be promoted to the parent,
	 * leaving the right hand node with one less element.  If the
	 * insertion point will be on the left-hand side adjust the split
	 * point to give the right hand side one additional node.
	 */
	node = cursor->node;
	ondisk = node->ondisk;
	split = (ondisk->count + 1) / 2;
	if (cursor->index <= split)
		--split;

	/*
	 * If we are at the root of the cluster, create a new root node with
	 * 1 element and split normally.  Avoid making major modifications
	 * until we know the whole operation will work.
	 *
	 * The root of the cluster is different from the root of the root
	 * cluster.  Use the node's on-disk structure's parent offset to
	 * detect the case.
	 */
	if (ondisk->parent == 0) {
		parent = hammer_alloc_btree(node->cluster, &error);
		if (parent == NULL)
			goto done;
		hammer_lock_ex(&parent->lock);
		hammer_modify_node(parent);
		ondisk = parent->ondisk;
		ondisk->count = 1;
		ondisk->parent = 0;
		ondisk->type = HAMMER_BTREE_TYPE_INTERNAL;
		ondisk->elms[0].base = node->cluster->clu_btree_beg;
		ondisk->elms[0].base.btype = node->ondisk->type;
		ondisk->elms[0].internal.subtree_offset = node->node_offset;
		ondisk->elms[1].base = node->cluster->clu_btree_end;
		/* ondisk->elms[1].base.btype - not used */
		made_root = 1;
		parent_index = 0;	/* index of current node in parent */
	} else {
		made_root = 0;
		parent = cursor->parent;
		parent_index = cursor->parent_index;
		KKASSERT(parent->cluster == node->cluster);
	}

	/*
	 * Split node into new_node at the split point.
	 *
	 *  B O O O P N N B	<-- P = node->elms[split]
	 *   0 1 2 3 4 5 6	<-- subtree indices
	 *
	 *       x x P x x
	 *        s S S s  
	 *         /   \
	 *  B O O O B    B N N B	<--- inner boundary points are 'P'
	 *   0 1 2 3      4 5 6  
	 *
	 */
	new_node = hammer_alloc_btree(node->cluster, &error);
	if (new_node == NULL) {
		if (made_root) {
			hammer_unlock(&parent->lock);
			parent->flags |= HAMMER_NODE_DELETED;
			hammer_rel_node(parent);
		}
		goto done;
	}
	hammer_lock_ex(&new_node->lock);

	/*
	 * Create the new node.  P becomes the left-hand boundary in the
	 * new node.  Copy the right-hand boundary as well.
	 *
	 * elm is the new separator.
	 */
	hammer_modify_node(new_node);
	hammer_modify_node(node);
	ondisk = node->ondisk;
	elm = &ondisk->elms[split];
	bcopy(elm, &new_node->ondisk->elms[0],
	      (ondisk->count - split + 1) * esize);
	new_node->ondisk->count = ondisk->count - split;
	new_node->ondisk->parent = parent->node_offset;
	new_node->ondisk->type = HAMMER_BTREE_TYPE_INTERNAL;
	KKASSERT(ondisk->type == new_node->ondisk->type);

	/*
	 * Cleanup the original node.  Elm (P) becomes the new boundary,
	 * its subtree_offset was moved to the new node.  If we had created
	 * a new root its parent pointer may have changed.
	 */
	elm->internal.subtree_offset = 0;
	ondisk->count = split;

	/*
	 * Insert the separator into the parent, fixup the parent's
	 * reference to the original node, and reference the new node.
	 * The separator is P.
	 *
	 * Remember that base.count does not include the right-hand boundary.
	 */
	hammer_modify_node(parent);
	ondisk = parent->ondisk;
	KKASSERT(ondisk->count != HAMMER_BTREE_INT_ELMS);
	parent_elm = &ondisk->elms[parent_index+1];
	bcopy(parent_elm, parent_elm + 1,
	      (ondisk->count - parent_index) * esize);
	parent_elm->internal.base = elm->base;	/* separator P */
	parent_elm->internal.base.btype = new_node->ondisk->type;
	parent_elm->internal.subtree_offset = new_node->node_offset;
	++ondisk->count;

	/*
	 * The children of new_node need their parent pointer set to new_node.
	 */
	for (i = 0; i < new_node->ondisk->count; ++i) {
		elm = &new_node->ondisk->elms[i];
		error = btree_set_parent(new_node, elm);
		if (error) {
			panic("btree_split_internal: btree-fixup problem");
		}
	}

	/*
	 * The cluster's root pointer may have to be updated.
	 */
	if (made_root) {
		hammer_modify_cluster(node->cluster);
		node->cluster->ondisk->clu_btree_root = parent->node_offset;
		node->ondisk->parent = parent->node_offset;
		if (cursor->parent) {
			hammer_unlock(&cursor->parent->lock);
			hammer_rel_node(cursor->parent);
		}
		cursor->parent = parent;	/* lock'd and ref'd */
	}


	/*
	 * Ok, now adjust the cursor depending on which element the original
	 * index was pointing at.  If we are >= the split point the push node
	 * is now in the new node.
	 *
	 * NOTE: If we are at the split point itself we cannot stay with the
	 * original node because the push index will point at the right-hand
	 * boundary, which is illegal.
	 *
	 * NOTE: The cursor's parent or parent_index must be adjusted for
	 * the case where a new parent (new root) was created, and the case
	 * where the cursor is now pointing at the split node.
	 */
	if (cursor->index >= split) {
		cursor->parent_index = parent_index + 1;
		cursor->index -= split;
		hammer_unlock(&cursor->node->lock);
		hammer_rel_node(cursor->node);
		cursor->node = new_node;	/* locked and ref'd */
	} else {
		cursor->parent_index = parent_index;
		hammer_unlock(&new_node->lock);
		hammer_rel_node(new_node);
	}

	/*
	 * Fixup left and right bounds
	 */
	parent_elm = &parent->ondisk->elms[cursor->parent_index];
	cursor->left_bound = &parent_elm[0].internal.base;
	cursor->right_bound = &parent_elm[1].internal.base;
	KKASSERT(hammer_btree_cmp(cursor->left_bound,
		 &cursor->node->ondisk->elms[0].internal.base) <= 0);
	KKASSERT(hammer_btree_cmp(cursor->right_bound,
		 &cursor->node->ondisk->elms[cursor->node->ondisk->count].internal.base) >= 0);

done:
	hammer_cursor_downgrade(cursor);
	return (error);
}

/*
 * Same as the above, but splits a full leaf node.
 *
 * This function
 */
static
int
btree_split_leaf(hammer_cursor_t cursor)
{
	hammer_node_ondisk_t ondisk;
	hammer_node_t parent;
	hammer_node_t leaf;
	hammer_node_t new_leaf;
	hammer_btree_elm_t elm;
	hammer_btree_elm_t parent_elm;
	hammer_base_elm_t mid_boundary;
	int parent_index;
	int made_root;
	int split;
	int error;
	int i;
	const size_t esize = sizeof(*elm);

	if ((error = hammer_cursor_upgrade(cursor)) != 0)
		return(error);

	/* 
	 * Calculate the split point.  If the insertion point will be on
	 * the left-hand side adjust the split point to give the right
	 * hand side one additional node.
	 *
	 * Spikes are made up of two leaf elements which cannot be
	 * safely split.
	 */
	leaf = cursor->node;
	ondisk = leaf->ondisk;
	split = (ondisk->count + 1) / 2;
	if (cursor->index <= split)
		--split;
	error = 0;

	elm = &ondisk->elms[split];
	if (elm->leaf.base.btype == HAMMER_BTREE_TYPE_SPIKE_END) {
		KKASSERT(split &&
			elm[-1].leaf.base.btype == HAMMER_BTREE_TYPE_SPIKE_BEG);
		--split;
	}

	/*
	 * If we are at the root of the tree, create a new root node with
	 * 1 element and split normally.  Avoid making major modifications
	 * until we know the whole operation will work.
	 */
	if (ondisk->parent == 0) {
		parent = hammer_alloc_btree(leaf->cluster, &error);
		if (parent == NULL)
			goto done;
		hammer_lock_ex(&parent->lock);
		hammer_modify_node(parent);
		ondisk = parent->ondisk;
		ondisk->count = 1;
		ondisk->parent = 0;
		ondisk->type = HAMMER_BTREE_TYPE_INTERNAL;
		ondisk->elms[0].base = leaf->cluster->clu_btree_beg;
		ondisk->elms[0].base.btype = leaf->ondisk->type;
		ondisk->elms[0].internal.subtree_offset = leaf->node_offset;
		ondisk->elms[1].base = leaf->cluster->clu_btree_end;
		/* ondisk->elms[1].base.btype = not used */
		made_root = 1;
		parent_index = 0;	/* insertion point in parent */
	} else {
		made_root = 0;
		parent = cursor->parent;
		parent_index = cursor->parent_index;
		KKASSERT(parent->cluster == leaf->cluster);
	}

	/*
	 * Split leaf into new_leaf at the split point.  Select a separator
	 * value in-between the two leafs but with a bent towards the right
	 * leaf since comparisons use an 'elm >= separator' inequality.
	 *
	 *  L L L L L L L L
	 *
	 *       x x P x x
	 *        s S S s  
	 *         /   \
	 *  L L L L     L L L L
	 */
	new_leaf = hammer_alloc_btree(leaf->cluster, &error);
	if (new_leaf == NULL) {
		if (made_root) {
			hammer_unlock(&parent->lock);
			parent->flags |= HAMMER_NODE_DELETED;
			hammer_rel_node(parent);
		}
		goto done;
	}
	hammer_lock_ex(&new_leaf->lock);

	/*
	 * Create the new node.  P (elm) become the left-hand boundary in the
	 * new node.  Copy the right-hand boundary as well.
	 */
	hammer_modify_node(leaf);
	hammer_modify_node(new_leaf);
	ondisk = leaf->ondisk;
	elm = &ondisk->elms[split];
	bcopy(elm, &new_leaf->ondisk->elms[0], (ondisk->count - split) * esize);
	new_leaf->ondisk->count = ondisk->count - split;
	new_leaf->ondisk->parent = parent->node_offset;
	new_leaf->ondisk->type = HAMMER_BTREE_TYPE_LEAF;
	KKASSERT(ondisk->type == new_leaf->ondisk->type);

	/*
	 * Cleanup the original node.  Because this is a leaf node and
	 * leaf nodes do not have a right-hand boundary, there
	 * aren't any special edge cases to clean up.  We just fixup the
	 * count.
	 */
	ondisk->count = split;

	/*
	 * Insert the separator into the parent, fixup the parent's
	 * reference to the original node, and reference the new node.
	 * The separator is P.
	 *
	 * Remember that base.count does not include the right-hand boundary.
	 * We are copying parent_index+1 to parent_index+2, not +0 to +1.
	 */
	hammer_modify_node(parent);
	ondisk = parent->ondisk;
	KKASSERT(ondisk->count != HAMMER_BTREE_INT_ELMS);
	parent_elm = &ondisk->elms[parent_index+1];
	bcopy(parent_elm, parent_elm + 1,
	      (ondisk->count - parent_index) * esize);

	/*
	 * Create the separator.  XXX At the moment use exactly the
	 * right-hand element if this is a recovery operation in order
	 * to guarantee that it does not bisect the spike elements in a
	 * later call to hammer_btree_insert_cluster().
	 */
	if (cursor->flags & HAMMER_CURSOR_RECOVER) {
		parent_elm->base = elm[0].base;
	} else {
		hammer_make_separator(&elm[-1].base, &elm[0].base,
				      &parent_elm->base);
	}
	parent_elm->internal.base.btype = new_leaf->ondisk->type;
	parent_elm->internal.subtree_offset = new_leaf->node_offset;
	mid_boundary = &parent_elm->base;
	++ondisk->count;

	/*
	 * The children of new_leaf need their parent pointer set to new_leaf.
	 *
	 * The leaf's elements are either TYPE_RECORD or TYPE_SPIKE_*.  Only
	 * elements of BTREE_TYPE_SPIKE_END really requires any action.
	 */
	for (i = 0; i < new_leaf->ondisk->count; ++i) {
		elm = &new_leaf->ondisk->elms[i];
		error = btree_set_parent(new_leaf, elm);
		if (error) {
			panic("btree_split_internal: btree-fixup problem");
		}
	}

	/*
	 * The cluster's root pointer may have to be updated.
	 */
	if (made_root) {
		hammer_modify_cluster(leaf->cluster);
		leaf->cluster->ondisk->clu_btree_root = parent->node_offset;
		leaf->ondisk->parent = parent->node_offset;
		if (cursor->parent) {
			hammer_unlock(&cursor->parent->lock);
			hammer_rel_node(cursor->parent);
		}
		cursor->parent = parent;	/* lock'd and ref'd */
	}

	/*
	 * Ok, now adjust the cursor depending on which element the original
	 * index was pointing at.  If we are >= the split point the push node
	 * is now in the new node.
	 *
	 * NOTE: If we are at the split point itself we need to select the
	 * old or new node based on where key_beg's insertion point will be.
	 * If we pick the wrong side the inserted element will wind up in
	 * the wrong leaf node and outside that node's bounds.
	 */
	if (cursor->index > split ||
	    (cursor->index == split &&
	     hammer_btree_cmp(&cursor->key_beg, mid_boundary) >= 0)) {
		cursor->parent_index = parent_index + 1;
		cursor->index -= split;
		hammer_unlock(&cursor->node->lock);
		hammer_rel_node(cursor->node);
		cursor->node = new_leaf;
	} else {
		cursor->parent_index = parent_index;
		hammer_unlock(&new_leaf->lock);
		hammer_rel_node(new_leaf);
	}

	/*
	 * Fixup left and right bounds
	 */
	parent_elm = &parent->ondisk->elms[cursor->parent_index];
	cursor->left_bound = &parent_elm[0].internal.base;
	cursor->right_bound = &parent_elm[1].internal.base;

	/*
	 * Note: The right assertion is typically > 0, but if the last element
	 * is a SPIKE_END it can be == 0 because the spike-end is non-inclusive
	 * of the range being spiked.
	 *
	 * This may seem a bit odd but it works.
	 */
	KKASSERT(hammer_btree_cmp(cursor->left_bound,
		 &cursor->node->ondisk->elms[0].leaf.base) <= 0);
	KKASSERT(hammer_btree_cmp(cursor->right_bound,
		 &cursor->node->ondisk->elms[cursor->node->ondisk->count-1].leaf.base) >= 0);

done:
	hammer_cursor_downgrade(cursor);
	return (error);
}

/*
 * Attempt to remove the empty B-Tree node at (cursor->node).  Returns 0
 * on success, EAGAIN if we could not acquire the necessary locks, or some
 * other error.  This node can be a leaf node or an internal node.
 *
 * On return the cursor may end up pointing at an internal node, suitable
 * for further iteration but not for an immediate insertion or deletion.
 *
 * cursor->node may be an internal node or a leaf node.
 *
 * NOTE: If cursor->node has one element it is the parent trying to delete
 * that element, make sure cursor->index is properly adjusted on success.
 */
int
btree_remove(hammer_cursor_t cursor, int depth)
{
	hammer_node_ondisk_t ondisk;
	hammer_btree_elm_t elm;
	hammer_node_t node;
	hammer_node_t save;
	hammer_node_t parent;
	const int esize = sizeof(*elm);
	int error;

	/*
	 * If we are at the root of the cluster we must be able to
	 * successfully delete the HAMMER_BTREE_SPIKE_* leaf elements in
	 * the parent in order to be able to destroy the cluster.
	 */
	node = cursor->node;

	if (node->ondisk->parent == 0) {
		hammer_modify_node(node);
		ondisk = node->ondisk;
		ondisk->type = HAMMER_BTREE_TYPE_LEAF;
		ondisk->count = 0;
		cursor->index = 0;
		error = 0;

		if (depth > 16) {
			Debugger("btree_remove: stack limit reached");
			return(EDEADLK);
		}

		/*
		 * When trying to delete a cluster we need to exclusively
		 * lock the cluster root, its parent (leaf in parent cluster),
		 * AND the parent of that leaf if it's going to be empty,
		 * because we can't leave around an empty leaf.
		 *
		 * XXX this is messy due to potentially recursive locks.
		 * downgrade the cursor, get a second shared lock on the
		 * node that cannot deadlock because we only own shared locks
		 * then, cursor-up, and re-upgrade everything.  If the
		 * upgrades EDEADLK then don't try to remove the cluster
		 * at this time.
		 */
		if ((parent = cursor->parent) != NULL) {
			hammer_cursor_downgrade(cursor);
			save = node;
			hammer_ref_node(save);
			hammer_lock_sh(&save->lock);

			error = hammer_cursor_up(cursor);
			if (error == 0)
				error = hammer_cursor_upgrade(cursor);
			if (error == 0)
				error = hammer_lock_upgrade(&save->lock);

			if (error) {
				/* may be EDEADLK */
				kprintf("BTREE_REMOVE: Cannot delete cluster\n");
				Debugger("BTREE_REMOVE");
			} else {
				/* 
				 * cursor->node is now the leaf in the parent
				 * cluster containing the spike elements.
				 *
				 * The cursor should be pointing at the
				 * SPIKE_END element.
				 *
				 * Remove the spike elements and recurse
				 * if the leaf becomes empty.
				 */
				node = cursor->node;
				hammer_modify_node(node);
				ondisk = node->ondisk;
				KKASSERT(cursor->index > 0);
				--cursor->index;
				elm = &ondisk->elms[cursor->index];
				KKASSERT(elm[0].leaf.base.btype ==
					 HAMMER_BTREE_TYPE_SPIKE_BEG);
				KKASSERT(elm[1].leaf.base.btype ==
					 HAMMER_BTREE_TYPE_SPIKE_END);
				bcopy(elm + 2, elm, (ondisk->count -
						    cursor->index - 2) * esize);
				ondisk->count -= 2;
				if (ondisk->count == 0)
					error = btree_remove(cursor, depth + 1);
				hammer_flush_node(save);
				save->flags |= HAMMER_NODE_DELETED;
			}
			hammer_unlock(&save->lock);
			hammer_rel_node(save);
		}
		return(error);
	}

	/*
	 * Zero-out the parent's reference to the child and flag the
	 * child for destruction.  This ensures that the child is not
	 * reused while other references to it exist.
	 */
	parent = cursor->parent;
	hammer_modify_node(parent);
	ondisk = parent->ondisk;
	KKASSERT(ondisk->type == HAMMER_BTREE_TYPE_INTERNAL);
	elm = &ondisk->elms[cursor->parent_index];
	KKASSERT(elm->internal.subtree_offset == node->node_offset);
	elm->internal.subtree_offset = 0;

	hammer_flush_node(node);
	node->flags |= HAMMER_NODE_DELETED;

	/*
	 * Don't blow up the kernel stack.
	 */
	if (depth > 20) {
		kprintf("btree_remove: stack limit reached");
		return(EDEADLK);
	}

	/*
	 * If the parent would otherwise not become empty we can physically
	 * remove the zero'd element.  Note however that in order to
	 * guarentee a valid cursor we still need to be able to cursor up
	 * because we no longer have a node.
	 *
	 * This collapse will change the parent's boundary elements, making
	 * them wider.  The new boundaries are recursively corrected in
	 * btree_search().
	 *
	 * XXX we can theoretically recalculate the midpoint but there isn't
	 * much of a reason to do it.
	 */
	error = hammer_cursor_up(cursor);
	if (error == 0)
		error = hammer_cursor_upgrade(cursor);

	if (error) {
		kprintf("BTREE_REMOVE: Cannot lock parent, skipping\n");
		Debugger("BTREE_REMOVE");
		return (0);
	}

	/*
	 * Remove the internal element from the parent.  The bcopy must
	 * include the right boundary element.
	 */
	KKASSERT(parent == cursor->node && ondisk == parent->ondisk);
	node = parent;
	parent = NULL;
	/* ondisk is node's ondisk */
	/* elm is node's element */

	/*
	 * Remove the internal element that we zero'd out.  Tell the caller
	 * to loop if it hits zero (to try to avoid eating up precious kernel
	 * stack).
	 */
	KKASSERT(ondisk->count > 0);
	bcopy(&elm[1], &elm[0], (ondisk->count - cursor->index) * esize);
	--ondisk->count;
	if (ondisk->count == 0)
		error = EAGAIN;
	return(error);
}

/*
 * Attempt to remove the deleted internal element at the current cursor
 * position.  If we are unable to remove the element we return EDEADLK.
 *
 * If the current internal node becomes empty we delete it in the parent
 * and cursor up, looping until we finish or we deadlock.
 *
 * On return, if successful, the cursor will be pointing at the next
 * iterative position in the B-Tree.  If unsuccessful the cursor will be
 * pointing at the last deleted internal element that could not be
 * removed.
 */
static 
int
btree_remove_deleted_element(hammer_cursor_t cursor)
{
	hammer_node_t node;
	hammer_btree_elm_t elm; 
	int error;

	if ((error = hammer_cursor_upgrade(cursor)) != 0)
		return(error);
	node = cursor->node;
	elm = &node->ondisk->elms[cursor->index];
	if (elm->internal.subtree_offset == 0) {
		do {
			error = btree_remove(cursor, 0);
			kprintf("BTREE REMOVE DELETED ELEMENT %d\n", error);
		} while (error == EAGAIN);
	}
	return(error);
}

/*
 * The element (elm) has been moved to a new internal node (node).
 *
 * If the element represents a pointer to an internal node that node's
 * parent must be adjusted to the element's new location.
 *
 * If the element represents a spike the target cluster's header must
 * be adjusted to point to the element's new location.  This only
 * applies to HAMMER_SPIKE_END.
 *
 * XXX deadlock potential here with our exclusive locks
 */
static
int
btree_set_parent(hammer_node_t node, hammer_btree_elm_t elm)
{
	hammer_volume_t volume;
	hammer_cluster_t cluster;
	hammer_node_t child;
	int error;

	error = 0;

	switch(elm->base.btype) {
	case HAMMER_BTREE_TYPE_INTERNAL:
	case HAMMER_BTREE_TYPE_LEAF:
		child = hammer_get_node(node->cluster,
					elm->internal.subtree_offset, &error);
		if (error == 0) {
			hammer_modify_node(child);
			hammer_lock_ex(&child->lock);
			child->ondisk->parent = node->node_offset;
			hammer_unlock(&child->lock);
			hammer_rel_node(child);
		}
		break;
	case HAMMER_BTREE_TYPE_SPIKE_END:
		volume = hammer_get_volume(node->cluster->volume->hmp,
					   elm->leaf.spike_vol_no, &error);
		if (error)
			break;
		cluster = hammer_get_cluster(volume, elm->leaf.spike_clu_no,
					     &error, 0);
                hammer_rel_volume(volume, 0);
		if (error)
			break;
		hammer_modify_cluster(cluster);
		hammer_lock_ex(&cluster->io.lock);
		cluster->ondisk->clu_btree_parent_offset = node->node_offset;
		hammer_unlock(&cluster->io.lock);
		KKASSERT(cluster->ondisk->clu_btree_parent_clu_no ==
			 node->cluster->clu_no);
		KKASSERT(cluster->ondisk->clu_btree_parent_vol_no ==
			 node->cluster->volume->vol_no);
		hammer_rel_cluster(cluster, 0);
		break;
	default:
		break;
	}
	return(error);
}

/************************************************************************
 *			   MISCELLANIOUS SUPPORT 			*
 ************************************************************************/

/*
 * Compare two B-Tree elements, return -N, 0, or +N (e.g. similar to strcmp).
 *
 * Note that for this particular function a return value of -1, 0, or +1
 * can denote a match if delete_tid is otherwise discounted.  A delete_tid
 * of zero is considered to be 'infinity' in comparisons.
 *
 * See also hammer_rec_rb_compare() and hammer_rec_cmp() in hammer_object.c.
 */
int
hammer_btree_cmp(hammer_base_elm_t key1, hammer_base_elm_t key2)
{
	if (key1->obj_id < key2->obj_id)
		return(-4);
	if (key1->obj_id > key2->obj_id)
		return(4);

	if (key1->rec_type < key2->rec_type)
		return(-3);
	if (key1->rec_type > key2->rec_type)
		return(3);

	if (key1->key < key2->key)
		return(-2);
	if (key1->key > key2->key)
		return(2);

	/*
	 * A delete_tid of zero indicates a record which has not been
	 * deleted yet and must be considered to have a value of positive
	 * infinity.
	 */
	if (key1->delete_tid == 0) {
		if (key2->delete_tid == 0)
			return(0);
		return(1);
	}
	if (key2->delete_tid == 0)
		return(-1);
	if (key1->delete_tid < key2->delete_tid)
		return(-1);
	if (key1->delete_tid > key2->delete_tid)
		return(1);
	return(0);
}

/*
 * Test a timestamp against an element to determine whether the
 * element is visible.  A timestamp of 0 means 'infinity'.
 */
int
hammer_btree_chkts(hammer_tid_t asof, hammer_base_elm_t base)
{
	if (asof == 0) {
		if (base->delete_tid)
			return(1);
		return(0);
	}
	if (asof < base->create_tid)
		return(-1);
	if (base->delete_tid && asof >= base->delete_tid)
		return(1);
	return(0);
}

/*
 * Create a separator half way inbetween key1 and key2.  For fields just
 * one unit apart, the separator will match key2.  key1 is on the left-hand
 * side and key2 is on the right-hand side.
 *
 * delete_tid has to be special cased because a value of 0 represents
 * infinity, and records with a delete_tid of 0 can be replaced with 
 * a non-zero delete_tid when deleted and must maintain their proper
 * (as in the same) position in the B-Tree.
 */
#define MAKE_SEPARATOR(key1, key2, dest, field)	\
	dest->field = key1->field + ((key2->field - key1->field + 1) >> 1);

static void
hammer_make_separator(hammer_base_elm_t key1, hammer_base_elm_t key2,
		      hammer_base_elm_t dest)
{
	bzero(dest, sizeof(*dest));
	MAKE_SEPARATOR(key1, key2, dest, obj_id);
	MAKE_SEPARATOR(key1, key2, dest, rec_type);
	MAKE_SEPARATOR(key1, key2, dest, key);

	if (key1->obj_id == key2->obj_id &&
	    key1->rec_type == key2->rec_type &&
	    key1->key == key2->key) {
		if (key1->delete_tid == 0) {
			/* 
			 * key1 cannot be on the left hand side if everything
			 * matches but it has an infinite delete_tid!
			 */
			panic("hammer_make_separator: illegal delete_tid");
		} else if (key2->delete_tid == 0) {
			dest->delete_tid = key1->delete_tid + 1;
		} else {
			MAKE_SEPARATOR(key1, key2, dest, delete_tid);
		}
	} else {
		dest->delete_tid = 0;
	}
}

#undef MAKE_SEPARATOR

/*
 * Return whether a generic internal or leaf node is full
 */
static int
btree_node_is_full(hammer_node_ondisk_t node)
{
	switch(node->type) {
	case HAMMER_BTREE_TYPE_INTERNAL:
		if (node->count == HAMMER_BTREE_INT_ELMS)
			return(1);
		break;
	case HAMMER_BTREE_TYPE_LEAF:
		if (node->count == HAMMER_BTREE_LEAF_ELMS)
			return(1);
		break;
	default:
		panic("illegal btree subtype");
	}
	return(0);
}

/*
 * Return whether a generic internal or leaf node is almost full.  This
 * routine is used as a helper for search insertions to guarentee at 
 * least 2 available slots in the internal node(s) leading up to a leaf,
 * so hammer_btree_insert_cluster() will function properly.
 */
static int
btree_node_is_almost_full(hammer_node_ondisk_t node)
{
	switch(node->type) {
	case HAMMER_BTREE_TYPE_INTERNAL:
		if (node->count > HAMMER_BTREE_INT_ELMS - 2)
			return(1);
		break;
	case HAMMER_BTREE_TYPE_LEAF:
		if (node->count > HAMMER_BTREE_LEAF_ELMS - 2)
			return(1);
		break;
	default:
		panic("illegal btree subtype");
	}
	return(0);
}

#if 0
static int
btree_max_elements(u_int8_t type)
{
	if (type == HAMMER_BTREE_TYPE_LEAF)
		return(HAMMER_BTREE_LEAF_ELMS);
	if (type == HAMMER_BTREE_TYPE_INTERNAL)
		return(HAMMER_BTREE_INT_ELMS);
	panic("btree_max_elements: bad type %d\n", type);
}
#endif

void
hammer_print_btree_node(hammer_node_ondisk_t ondisk)
{
	hammer_btree_elm_t elm;
	int i;

	kprintf("node %p count=%d parent=%d type=%c\n",
		ondisk, ondisk->count, ondisk->parent, ondisk->type);

	/*
	 * Dump both boundary elements if an internal node
	 */
	if (ondisk->type == HAMMER_BTREE_TYPE_INTERNAL) {
		for (i = 0; i <= ondisk->count; ++i) {
			elm = &ondisk->elms[i];
			hammer_print_btree_elm(elm, ondisk->type, i);
		}
	} else {
		for (i = 0; i < ondisk->count; ++i) {
			elm = &ondisk->elms[i];
			hammer_print_btree_elm(elm, ondisk->type, i);
		}
	}
}

void
hammer_print_btree_elm(hammer_btree_elm_t elm, u_int8_t type, int i)
{
	kprintf("  %2d", i);
	kprintf("\tobjid        = %016llx\n", elm->base.obj_id);
	kprintf("\tkey          = %016llx\n", elm->base.key);
	kprintf("\tcreate_tid   = %016llx\n", elm->base.create_tid);
	kprintf("\tdelete_tid   = %016llx\n", elm->base.delete_tid);
	kprintf("\trec_type     = %04x\n", elm->base.rec_type);
	kprintf("\tobj_type     = %02x\n", elm->base.obj_type);
	kprintf("\tbtype 	= %02x (%c)\n",
		elm->base.btype,
		(elm->base.btype ? elm->base.btype : '?'));

	switch(type) {
	case HAMMER_BTREE_TYPE_INTERNAL:
		kprintf("\tsubtree_off  = %08x\n",
			elm->internal.subtree_offset);
		break;
	case HAMMER_BTREE_TYPE_SPIKE_BEG:
	case HAMMER_BTREE_TYPE_SPIKE_END:
		kprintf("\tspike_clu_no = %d\n", elm->leaf.spike_clu_no);
		kprintf("\tspike_vol_no = %d\n", elm->leaf.spike_vol_no);
		break;
	case HAMMER_BTREE_TYPE_RECORD:
		kprintf("\trec_offset   = %08x\n", elm->leaf.rec_offset);
		kprintf("\tdata_offset  = %08x\n", elm->leaf.data_offset);
		kprintf("\tdata_len     = %08x\n", elm->leaf.data_len);
		kprintf("\tdata_crc     = %08x\n", elm->leaf.data_crc);
		break;
	}
}