2 # LINT -- config file for checking all the sources, tries to pull in
3 # as much of the source tree as it can.
5 # $FreeBSD: src/sys/i386/conf/LINT,v 1.749.2.144 2003/06/04 17:56:59 sam Exp $
7 # See the kernconf(5) manual page for more information on the format of
10 # NB: You probably don't want to try running a kernel built from this
11 # file. Instead, you should start from GENERIC, and add options from
12 # this file as required.
15 # These directives are mandatory. The machine directive specifies the
16 # platform and the machine_arch directive specifies the cpu architecture.
23 # This is the ``identification'' of the kernel. Usually this should
24 # be the same as the name of your kernel.
29 # The `maxusers' parameter controls the static sizing of a number of
30 # internal system tables by a formula defined in subr_param.c. Setting
31 # maxusers to 0 will cause the system to auto-size based on physical
37 # The `makeoptions' parameter allows variables to be passed to the
38 # generated Makefile in the build area.
40 # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
41 # after most other flags. Here we use it to inhibit use of non-optimal
42 # gcc builtin functions (e.g., memcmp).
44 # DEBUG happens to be magic.
45 # The following is equivalent to 'config -g KERNELNAME' and creates
46 # 'kernel.debug' compiled with -g debugging as well as a normal
47 # 'kernel'. Use 'make install.debug' to install the debug kernel
48 # but that isn't normally necessary as the debug symbols are not loaded
49 # by the kernel and are not useful there anyway.
51 # KERNEL can be overridden so that you can change the default name of your
54 # MODULES_OVERRIDE can be used to limit modules built to a specific list.
56 # INSTALLSTRIPPED can be set to cause installkernel to install stripped
57 # kernels and modules rather than a kernel and modules with debug symbols.
59 # INSTALLSTRIPPEDMODULES can be set to allow a full debug kernel to be
60 # installed, but to strip the installed modules.
62 makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc.
63 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
64 #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo"
65 # Only build Linux API modules and plus those parts of the sound system I need.
66 #makeoptions MODULES_OVERRIDE="linux sound/snd sound/pcm sound/driver/maestro3"
67 #makeoptions INSTALLSTRIPPED=1
68 #makeoptions INSTALLSTRIPPEDMODULES=1
71 # Certain applications can grow to be larger than the 128M limit
72 # that DragonFly initially imposes. Below are some options to
73 # allow that limit to grow to 256MB, and can be increased further
74 # with changing the parameters. MAXDSIZ is the maximum that the
75 # limit can be set to, and the DFLDSIZ is the default value for
76 # the limit. MAXSSIZ is the maximum that the stack limit can be
77 # set to. You might want to set the default lower than the max,
78 # and explicitly set the maximum with a shell command for processes
79 # that regularly exceed the limit like INND.
81 options MAXDSIZ="(256*1024*1024)"
82 options MAXSSIZ="(256*1024*1024)"
83 options DFLDSIZ="(256*1024*1024)"
86 # BLKDEV_IOSIZE sets the default block size used in user block
87 # device I/O. Note that this value will be overridden by the label
88 # when specifying a block device from a label with a non-0
89 # partition blocksize. The default is PAGE_SIZE.
91 options BLKDEV_IOSIZE=8192
93 # Options for the VM subsystem.
94 options PQ_CACHESIZE=512 # color for 512k/16k cache
96 # This allows you to actually store this configuration file into
97 # the kernel binary itself, where it may be later read by saying:
98 # strings -n 3 /kernel | sed -n 's/^___//p' > MYKERNEL
100 options INCLUDE_CONFIG_FILE # Include this file in kernel
103 # The root device and filesystem type can be compiled in;
104 # this provides a fallback option if the root device cannot
105 # be correctly guessed by the bootstrap code, or an override if
106 # the RB_DFLTROOT flag (-r) is specified when booting the kernel.
108 options ROOTDEVNAME=\"ufs:da0s2e\"
111 #####################################################################
114 # SMP enables building of a Symmetric MultiProcessor Kernel.
115 # APIC_IO enables the use of the IO APIC for Symmetric I/O.
119 # An SMP kernel will ONLY run on an Intel MP spec. qualified motherboard.
121 # Be sure to disable 'cpu I486_CPU' for SMP kernels.
123 # Check the 'Rogue SMP hardware' section to see if additional options
124 # are required by your hardware.
127 # To make an SMP kernel both SMP and APIC_IO are usually
128 # specified. SMP boxes with severely broken BIOSes which
129 # boot fine for non-SMP builds *might* work in SMP mode
130 # if you define SMP and leave APIC_IO turned off.
132 options SMP # Symmetric MultiProcessor Kernel
133 options APIC_IO # Symmetric (APIC) I/O
136 # Rogue SMP hardware:
141 # The MP tables of most of the current generation MP motherboards
142 # do NOT properly support bridged PCI cards. To use one of these
143 # cards you should refer to ???
146 #####################################################################
150 # You must specify at least one CPU (the one you intend to run on);
151 # deleting the specification for CPUs you don't need to use may make
152 # parts of the system run faster.
155 cpu I586_CPU # aka Pentium(tm)
156 cpu I686_CPU # aka Pentium Pro(tm)
159 # Options for CPU features.
161 # CPU_AMD64X2_INTR_SPAM tries to route HyperTransport EXTINT and NMI
162 # messages to LINT0 on the local APIC when the BIOS has forgotten to
163 # do that. If this is not done on a multi-core cpu, EXTINT and NMI
164 # get routed to the INTR/NMI pins on *BOTH* cores simultaneously, causing
165 # two INTA ack cycles one of which will almost certainly result in a
166 # spurious interrupt vector being presented. This is often visible as
167 # an unmaskable IRQ 7 which occurs for every normal interrupt that occurs
170 # CPU_ATHLON_SSE_HACK tries to enable SSE instructions when the BIOS has
171 # forgotten to enable them.
173 # CPU_BLUELIGHTNING_FPU_OP_CACHE enables FPU operand cache on IBM
174 # BlueLightning CPU. It works only with Cyrix FPU, and this option
175 # should not be used with Intel FPU.
177 # CPU_BLUELIGHTNING_3X enables triple-clock mode on IBM Blue Lightning
178 # CPU if CPU supports it. The default is double-clock mode on
179 # BlueLightning CPU box.
181 # CPU_BTB_EN enables branch target buffer on Cyrix 5x86 (NOTE 1).
183 # CPU_DIRECT_MAPPED_CACHE sets L1 cache of Cyrix 486DLC CPU in direct
184 # mapped mode. Default is 2-way set associative mode.
186 # CPU_CYRIX_NO_LOCK enables weak locking for the entire address space
187 # of Cyrix 6x86 and 6x86MX CPUs by setting the NO_LOCK bit of CCR1.
188 # Otherwise, the NO_LOCK bit of CCR1 is cleared. (NOTE 3)
190 # CPU_DISABLE_5X86_LSSER disables load store serialize (i.e. enables
191 # reorder). This option should not be used if you use memory mapped
194 # CPU_DISABLE_SSE disables SSE/MMX2 instructions support.
196 # CPU_ENABLE_TCC enables Thermal Control Circuitry (TCC) found in some
197 # Pentium(tm) 4 and (possibly) later CPUs. When enabled and detected,
198 # TCC supports restricting power consumption using the hw.p4tcc.*
199 # sysctls. This operates independently of SpeedStep and is useful on
200 # systems where other mechanisms such as apm(4) or acpi(4) don't work.
202 # CPU_ENABLE_EST enables support for Enhanced SpeedStep technology
203 # found in Pentium(tm) M processors.
205 # CPU_FASTER_5X86_FPU enables faster FPU exception handler.
207 # CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products
210 # CPU_IORT defines I/O clock delay time (NOTE 1). Default values of
211 # I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively
214 # CPU_L2_LATENCY specified the L2 cache latency value. This option is used
215 # only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected.
216 # The default value is 5.
218 # CPU_ELAN enables support for AMDs ElanSC520 CPU.
220 # CPU_GEODE enables support for AMD Geode LX, Geode SC1100 and AMD CS5536
222 # CPU_LOOP_EN prevents flushing the prefetch buffer if the destination
223 # of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE
226 # CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option
227 # is useful when you use Socket 8 to Socket 370 converter, because most Pentium
228 # Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs.
230 # CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1).
232 # CPU_SUSP_HLT enables suspend on HALT. If this option is set, CPU
233 # enters suspend mode following execution of HALT instruction.
235 # CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD
238 # CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache
239 # flush at hold state.
241 # CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs
242 # without cache flush at hold state, and (2) write-back CPU cache on
243 # Cyrix 6x86 whose revision < 2.7 (NOTE 2).
245 # NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY
246 # Pentiums) from locking up when a LOCK CMPXCHG8B instruction is
247 # executed. This option is only needed if I586_CPU is also defined,
248 # and should be included for any non-Pentium CPU that defines it.
250 # NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors
251 # which indicates that the 15-16MB range is *definitely* not being
252 # occupied by an ISA memory hole.
254 # NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT,
255 # CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs.
256 # These options may crash your system.
258 # NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled
259 # in write-through mode when revision < 2.7. If revision of Cyrix
260 # 6x86 >= 2.7, CPU cache is always enabled in write-back mode.
262 # NOTE 3: This option may cause failures for software that requires
263 # locked cycles in order to operate correctly.
265 options CPU_AMD64X2_INTR_SPAM
266 options CPU_ATHLON_SSE_HACK
267 options CPU_BLUELIGHTNING_FPU_OP_CACHE
268 options CPU_BLUELIGHTNING_3X
270 options CPU_CYRIX_NO_LOCK
271 options CPU_DIRECT_MAPPED_CACHE
272 options CPU_DISABLE_5X86_LSSER
273 options CPU_DISABLE_SSE
275 options CPU_ENABLE_EST
276 options CPU_ENABLE_TCC
277 options CPU_FASTER_5X86_FPU
279 options CPU_I486_ON_386
281 options CPU_L2_LATENCY=5
283 options CPU_PPRO2CELERON
287 options CYRIX_CACHE_WORKS
288 options CYRIX_CACHE_REALLY_WORKS
289 #options NO_F00F_HACK
290 options NO_MEMORY_HOLE
293 # A math emulator is mandatory if you wish to run on hardware which
294 # does not have a floating-point processor.
295 options MATH_EMULATE #Support for x87 emulation
297 #####################################################################
298 # COMPATIBILITY OPTIONS
301 # Implement system calls compatible with 4.3BSD and older versions of
302 # FreeBSD. You probably do NOT want to remove this as much current code
303 # still relies on the 4.3 emulation.
308 # Implement system calls compatible with DragonFly 1.2 and older.
310 options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
313 # These three options provide support for System V Interface
314 # Definition-style interprocess communication, in the form of shared
315 # memory, semaphores, and message queues, respectively.
317 # System V shared memory and tunable parameters
318 options SYSVSHM # include support for shared memory
319 options SHMMAXPGS=1025 # max amount of shared memory pages (4k on i386)
320 options SHMALL=1025 # max amount of shared memory (bytes)
321 options SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
322 # max shared memory segment size (bytes)
323 options SHMMIN=2 # min shared memory segment size (bytes)
324 options SHMMNI=33 # max number of shared memory identifiers
325 options SHMSEG=9 # max shared memory segments per process
327 # System V semaphores and tunable parameters
328 options SYSVSEM # include support for semaphores
329 options SEMMAP=31 # amount of entries in semaphore map
330 options SEMMNI=11 # number of semaphore identifiers in the system
331 options SEMMNS=61 # number of semaphores in the system
332 options SEMMNU=31 # number of undo structures in the system
333 options SEMMSL=61 # max number of semaphores per id
334 options SEMOPM=101 # max number of operations per semop call
335 options SEMUME=11 # max number of undo entries per process
337 # System V message queues and tunable parameters
338 options SYSVMSG # include support for message queues
339 options MSGMNB=2049 # max characters per message queue
340 options MSGMNI=41 # max number of message queue identifiers
341 options MSGSEG=2049 # max number of message segments in the system
342 options MSGSSZ=16 # size of a message segment MUST be power of 2
343 options MSGTQL=41 # max amount of messages in the system
346 #####################################################################
350 # Enable the kernel debugger.
355 # Print a stack trace on kernel panic.
360 # Don't drop into DDB for a panic. Intended for unattended operation
361 # where you may want to drop to DDB from the console, but still want
362 # the machine to recover from a panic
364 options DDB_UNATTENDED
367 # If using GDB remote mode to debug the kernel, there's a non-standard
368 # extension to the remote protocol that can be used to use the serial
369 # port as both the debugging port and the system console. It's non-
370 # standard and you're on your own if you enable it. See also the
371 # "remotechat" variables in the DragonFly specific version of gdb.
373 options GDB_REMOTE_CHAT
376 # KTRACE enables the system-call tracing facility ktrace(2).
378 options KTRACE #kernel tracing
381 # The INVARIANTS option is used in a number of source files to enable
382 # extra sanity checking of internal structures. This support is not
383 # enabled by default because of the extra time it would take to check
384 # for these conditions, which can only occur as a result of
385 # programming errors.
390 # The DIAGNOSTIC option is used to enable extra debugging information
391 # from some parts of the kernel. As this makes everything more noisy,
392 # it is disabled by default.
397 # PERFMON causes the driver for Pentium/Pentium Pro performance counters
398 # to be compiled. See perfmon(4) for more information.
404 # This option let some drivers co-exist that can't co-exist in a running
405 # system. This is used to be able to compile all kernel code in one go for
406 # quality assurance purposes (like this file, which the option takes it name
409 options COMPILING_LINT
412 # XXX - this doesn't belong here.
413 # Allow ordinary users to take the console - this is useful for X.
416 # XXX - this doesn't belong here either
417 options USERCONFIG #boot -c editor
418 options INTRO_USERCONFIG #imply -c and show intro screen
419 options VISUAL_USERCONFIG #visual boot -c editor
422 #####################################################################
427 # Only the INET (Internet) family is officially supported in DragonFly.
428 # Source code for the NS (Xerox Network Service) is provided for amusement
431 options INET #Internet communications protocols
432 options INET6 #IPv6 communications protocols
433 options IPSEC #IP security
434 options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
435 options IPSEC_DEBUG #debug for IP security
437 # Set IPSEC_FILTERGIF to force packets coming through a gif tunnel
438 # to be processed by any configured packet filtering (ipfw, ipf).
439 # The default is that packets coming from a tunnel are _not_ processed;
440 # they are assumed trusted.
442 # Note that enabling this can be problematic as there are no mechanisms
443 # in place for distinguishing packets coming out of a tunnel (e.g. no
444 # encX devices as found on openbsd).
446 #options IPSEC_FILTERGIF #filter ipsec packets from a tunnel
449 # Experimental IPsec implementation that uses the kernel crypto
450 # framework. This cannot be configured together with IPSEC and
451 # (currently) supports only IPv4. To use this you must also
452 # configure the crypto device (see below). Note that with this
453 # you get all the IPsec protocols (e.g. there is no FAST_IPSEC_ESP).
454 # IPSEC_DEBUG is used, as above, to configure debugging support
455 # within the IPsec protocols.
457 #options FAST_IPSEC #new IPsec
459 options IPX #IPX/SPX communications protocols
460 options IPXIP #IPX in IP encapsulation (not available)
461 options IPTUNNEL #IP in IPX encapsulation (not available)
463 options NCP #NetWare Core protocol
465 options MPLS #Multi-Protocol Label Switching
467 options NETATALK #Appletalk communications protocols
469 # These are currently broken but are shipped due to interest.
470 #options NS #Xerox NS protocols
471 #options NSIP #XNS over IP
475 # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
477 # NETSMBCRYPTO enables support for encrypted passwords.
478 options NETSMB #SMB/CIFS requester
479 options NETSMBCRYPTO #encrypted password support for SMB
481 # mchain library. It can be either loaded as KLD or compiled into kernel
482 options LIBMCHAIN #mbuf management library
484 # netgraph(4). Enable the base netgraph code with the NETGRAPH option.
485 # Individual node types can be enabled with the corresponding option
486 # listed below; however, this is not strictly necessary as netgraph
487 # will automatically load the corresponding KLD module if the node type
488 # is not already compiled into the kernel. Each type below has a
489 # corresponding man page, e.g., ng_async(4).
490 options NETGRAPH #netgraph(4) system
491 options NETGRAPH_ASYNC
493 options NETGRAPH_BRIDGE
494 options NETGRAPH_CISCO
495 options NETGRAPH_ECHO
496 options NETGRAPH_EIFACE
497 options NETGRAPH_ETHER
498 options NETGRAPH_FRAME_RELAY
499 options NETGRAPH_HOLE
500 options NETGRAPH_IFACE
501 options NETGRAPH_KSOCKET
502 options NETGRAPH_L2TP
504 # MPPC compression requires proprietary files (not included)
505 #options NETGRAPH_MPPC_COMPRESSION
506 options NETGRAPH_MPPC_ENCRYPTION
507 options NETGRAPH_ONE2MANY
509 options NETGRAPH_PPPOE
510 options NETGRAPH_PPTPGRE
511 options NETGRAPH_RFC1490
512 options NETGRAPH_SOCKET
518 device mn # Munich32x/Falc54 Nx64kbit/sec cards.
521 # Network interfaces:
522 # The `loop' pseudo-device is MANDATORY when networking is enabled.
523 # The `ether' pseudo-device provides generic code to handle
524 # Ethernets; it is MANDATORY when a Ethernet device driver is
526 # The `sppp' pseudo-device serves a similar role for certain types
527 # of synchronous PPP links (like `ar').
528 # The `sl' pseudo-device implements the Serial Line IP (SLIP) service.
529 # The `ppp' pseudo-device implements the Point-to-Point Protocol.
530 # The `bpf' pseudo-device enables the Berkeley Packet Filter. Be
531 # aware of the legal and administrative consequences of enabling this
532 # option. The number of devices determines the maximum number of
533 # simultaneous BPF clients programs runnable.
534 # The `disc' pseudo-device implements a minimal network interface,
535 # which throws away all packets sent and never receives any. It is
536 # included for testing purposes. This shows up as the 'ds' interface.
537 # The `tun' pseudo-device implements (user-)ppp and nos-tun
538 # The `gif' pseudo-device implements IPv6 over IP4 tunneling,
539 # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
540 # IPv6 over IPv6 tunneling.
541 # The `gre' device implements two types of IP4 over IP4 tunneling:
542 # GRE and MOBILE, as specified in the RFC1701 and RFC2004.
543 # The `faith' pseudo-device captures packets sent to it and diverts them
544 # to the IPv4/IPv6 translation daemon.
545 # The `stf' device implements 6to4 encapsulation.
546 # The `ef' pseudo-device provides support for multiple ethernet frame types
547 # specified via ETHER_* options. See ef(4) for details.
549 # The PPP_BSDCOMP option enables support for compress(1) style entire
550 # packet compression, the PPP_DEFLATE is for zlib/gzip style compression.
551 # PPP_FILTER enables code for filtering the ppp data stream and selecting
552 # events for resetting the demand dial activity timer - requires bpf.
553 # See pppd(8) for more details.
555 pseudo-device ether #Generic Ethernet
556 pseudo-device vlan 1 #VLAN support
557 pseudo-device bridge #Bridging support
558 pseudo-device sppp #Generic Synchronous PPP
559 pseudo-device loop #Network loopback device
560 pseudo-device bpf #Berkeley packet filter
561 pseudo-device disc #Discard device (ds0, ds1, etc)
562 pseudo-device tun #Tunnel driver (ppp(8), nos-tun(8))
563 pseudo-device sl 2 #Serial Line IP
564 pseudo-device gre #IP over IP tunneling
565 pseudo-device ppp 2 #Point-to-point protocol
566 options PPP_BSDCOMP #PPP BSD-compress support
567 options PPP_DEFLATE #PPP zlib/deflate/gzip support
568 options PPP_FILTER #enable bpf filtering (needs bpf)
570 pseudo-device ef # Multiple ethernet frames support
571 options ETHER_II # enable Ethernet_II frame
572 options ETHER_8023 # enable Ethernet_802.3 (Novell) frame
573 options ETHER_8022 # enable Ethernet_802.2 frame
574 options ETHER_SNAP # enable Ethernet_802.2/SNAP frame
577 pseudo-device gif #IPv6 and IPv4 tunneling
578 pseudo-device faith 1 #for IPv6 and IPv4 translation
579 pseudo-device stf #6to4 IPv6 over IPv4 encapsulation
582 # Internet family options:
584 # MROUTING enables the kernel multicast packet forwarder, which works
587 # PIM enables Protocol Independent Multicast in the kernel.
588 # Requires MROUTING enabled.
590 # IPFIREWALL enables support for IP firewall construction, in
591 # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends
592 # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT
593 # limits the number of times a matching entry can be logged.
595 # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any"
596 # and if you do not add other rules during startup to allow access,
597 # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open
598 # in /etc/rc.conf when first enabling this feature, then refining the
599 # firewall rules in /etc/rc.firewall after you've tested that the new kernel
600 # feature works properly.
602 # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
603 # allow everything. Use with care, if a cracker can crash your
604 # firewall machine, they can get to your protected machines. However,
605 # if you are using it as an as-needed filter for specific problems as
606 # they arise, then this may be for you. Changing the default to 'allow'
607 # means that you won't get stuck if the kernel and /sbin/ipfw binary get
610 # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''
612 # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
613 # packets without touching the ttl). This can be useful to hide firewalls
614 # from traceroute and similar tools.
616 # TCPDEBUG is undocumented.
618 options MROUTING # Multicast routing
619 options PIM # Protocol Independent Multicast
620 options IPFIREWALL #firewall
621 options IPFIREWALL_DEBUG #debug prints
622 options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
623 options IPFIREWALL_FORWARD #enable transparent proxy support
624 options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
625 options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
626 options IPV6FIREWALL #firewall for IPv6
627 options IPV6FIREWALL_VERBOSE
628 options IPV6FIREWALL_VERBOSE_LIMIT=100
629 options IPV6FIREWALL_DEFAULT_TO_ACCEPT
630 options IPDIVERT #divert sockets
631 options IPFILTER #ipfilter support
632 options IPFILTER_LOG #ipfilter logging
633 options IPFILTER_DEFAULT_BLOCK #block all packets by default
634 options IPSTEALTH #support for stealth forwarding
636 options NS # NETNS support
646 # The MBUF_STRESS_TEST option enables options which create
647 # various random failures / extreme cases related to mbuf
648 # functions. See the mbuf(9) manpage for a list of available
650 options MBUF_STRESS_TEST
652 # Statically link in accept filters
653 options ACCEPT_FILTER_DATA
654 options ACCEPT_FILTER_HTTP
656 # TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
657 # carried in TCP option 19. This option is commonly used to protect
658 # TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
659 # This is enabled on a per-socket basis using the TCP_MD5SIG socket option.
660 # This requires the use of 'device crypto', 'options IPSEC'
661 # or 'device cryptodev'.
662 options TCP_SIGNATURE #include support for RFC 2385
665 # TCP_DROP_SYNFIN adds support for ignoring TCP packets with SYN+FIN. This
666 # prevents nmap et al. from identifying the TCP/IP stack, but breaks support
667 # for RFC1644 extensions and is not recommended for web servers.
669 options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
671 # ICMP_BANDLIM enables icmp error response bandwidth limiting. You
672 # typically want this option as it will help protect the machine from
673 # D.O.S. packet attacks.
677 # DUMMYNET enables the "dummynet" bandwidth limiter. You need
678 # IPFIREWALL as well. See the dummynet(4) and ipfw(8) manpages for more info.
681 options DUMMYNET_DEBUG
684 # ATM (HARP version) options
686 # ATM_CORE includes the base ATM functionality code. This must be included
689 # ATM_IP includes support for running IP over ATM.
691 # At least one (and usually only one) of the following signalling managers
692 # must be included (note that all signalling managers include PVC support):
693 # ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'.
694 # ATM_SPANS includes support for the `spans' signalling manager, which runs
695 # the FORE Systems's proprietary SPANS signalling protocol.
696 # ATM_UNI includes support for the `uni30' and `uni31' signalling managers,
697 # which run the ATM Forum UNI 3.x signalling protocols.
699 # The `hea' driver provides support for the Efficient Networks, Inc.
700 # ENI-155p ATM PCI Adapter.
702 # The `hfa' driver provides support for the FORE Systems, Inc.
703 # PCA-200E ATM PCI Adapter.
705 options ATM_CORE #core ATM protocol family
706 options ATM_IP #IP over ATM support
707 options ATM_SIGPVC #SIGPVC signalling manager
708 options ATM_SPANS #SPANS signalling manager
709 options ATM_UNI #UNI signalling manager
710 device hea #Efficient ENI-155p ATM PCI
711 device hfa #FORE PCA-200E ATM PCI
713 # DEVICE_POLLING adds support for mixed interrupt-polling handling
714 # of network device drivers, which has significant benefits in terms
715 # of robustness to overloads and responsivity, as well as permitting
716 # accurate scheduling of the CPU time between kernel network processing
717 # and other activities. The drawback is a moderate (up to 1/pollhz seconds)
718 # potential increase in response times. See polling(4) for further details.
720 options DEVICE_POLLING
722 # IFPOLL_ENABLE adds hardware queues' based polling
723 options IFPOLL_ENABLE
726 #####################################################################
730 # Only the root, /usr, and /tmp filesystems need be statically
731 # compiled; everything else will be automatically loaded at mount
732 # time. (Exception: the UFS family --- FFS, and MFS ---
733 # cannot currently be demand-loaded.) Some people still prefer
734 # to statically compile other filesystems as well.
736 # NB: The PORTAL and UNION filesystems are known to be
737 # buggy, and WILL panic your system if you attempt to do anything with
738 # them. They are included here as an incentive for some enterprising
739 # soul to sit down and fix them.
742 # One of these is mandatory:
743 options FFS #Fast filesystem
744 options MFS #Memory filesystem
745 options NFS #Network filesystem
747 # The rest are optional:
748 #options NFS_NOSERVER #Disable the NFS-server code.
749 options CD9660 #ISO 9660 filesystem
750 options FDESC #File descriptor filesystem
751 options MSDOSFS #MS DOS filesystem
752 options NTFS #NT filesystem
753 options NULLFS #NULL filesystem
754 options NWFS #NetWare filesystem
755 options PORTAL #Portal filesystem
756 options PROCFS #Process filesystem
757 options SMBFS #SMB/CIFS filesystem
758 options UDF #UDF filesystem
759 options HAMMER #HAMMER filesystem
760 options TMPFS #Temporary filesystem
762 # YYY-DR Till we rework the VOP methods for this filesystem
763 #options UNION #Union filesystem
764 # The xFS_ROOT options REQUIRE the associated ``options xFS''
765 options FFS_ROOT #FFS usable as root device
766 options NFS_ROOT #NFS usable as root device
768 # Soft updates is technique for improving UFS filesystem speed and
769 # making abrupt shutdown less risky.
772 # Directory hashing improves the speed of operations on very large
773 # directories at the expense of some memory.
776 # Make space in the kernel for a root filesystem on a md device.
777 # Define to the number of kilobytes to reserve for the filesystem.
778 options MD_ROOT_SIZE=10
780 # Make the md device a potential root device, either with preloaded
781 # images of type mfs_root or md_root.
784 # Specify double the default maximum size for malloc(9)-backed md devices.
785 options MD_NSECT=40000
787 # Allow this many swap-devices.
789 # In order to manage swap, the system must reserve bitmap space that
790 # scales with the largest mounted swap device multiplied by NSWAPDEV,
791 # regardless of whether other swap devices exist or not. So it
792 # is not a good idea to make this value too large.
795 # Disk quotas are supported when this option is enabled.
796 options QUOTA #enable disk quotas
798 # If you are running a machine just as a fileserver for PC and MAC
799 # users, using SAMBA or Netatalk, you may consider setting this option
800 # and keeping all those users' directories on a filesystem that is
801 # mounted with the suiddir option. This gives new files the same
802 # ownership as the directory (similar to group). It's a security hole
803 # if you let these users run programs, so confine it to file-servers
804 # (but it'll save you lots of headaches in those cases). Root owned
805 # directories are exempt and X bits are cleared. The suid bit must be
806 # set on the directory as well; see chmod(1) PC owners can't see/set
807 # ownerships so they keep getting their toes trodden on. This saves
808 # you all the support calls as the filesystem it's used on will act as
809 # they expect: "It's my dir so it must be my file".
814 options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec
815 options NFS_MAXATTRTIMO=60
816 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec
817 options NFS_MAXDIRATTRTIMO=60
818 options NFS_GATHERDELAY=10 # Default write gather delay (msec)
819 options NFS_UIDHASHSIZ=29 # Tune the size of nfssvc_sock with this
820 options NFS_WDELAYHASHSIZ=16 # and with this
821 options NFS_MUIDHASHSIZ=63 # Tune the size of nfsmount with this
822 options NFS_DEBUG # Enable NFS Debugging
825 options MSDOSFS_DEBUG # Enable MSDOSFS Debugging
828 # Add support for the EXT2FS filesystem of Linux fame. Be a bit
829 # careful with this - the ext2fs code has a tendency to lag behind
830 # changes and not be exercised very much, so mounting read/write could
831 # be dangerous (and even mounting read only could result in panics.)
835 # Use real implementations of the aio_* system calls. There are numerous
836 # stability and security issues in the current aio code that make it
837 # unsuitable for inclusion on machines with untrusted local users.
841 #####################################################################
844 # Real time extensions added in the 1993 Posix
845 # P1003_1B: Infrastructure
846 # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
847 # _KPOSIX_VERSION: Version kernel is built for
850 options _KPOSIX_PRIORITY_SCHEDULING
851 options _KPOSIX_VERSION=199309L
854 #####################################################################
857 # The granularity of operation is controlled by the kernel option HZ whose
858 # default value (100) means a granularity of 10ms (1s/HZ).
859 # Consider, however, that reducing the granularity too much might
860 # cause excessive overhead in clock interrupt processing,
861 # potentially causing ticks to be missed and thus actually reducing
862 # the accuracy of operation.
866 # The following options are used for debugging clock behavior only, and
867 # should not be used for production systems.
869 # CLK_CALIBRATION_LOOP will run the clock calibration loop at startup
870 # until the user presses a key.
872 options CLK_CALIBRATION_LOOP
874 # The following two options measure the frequency of the corresponding
875 # clock relative to the RTC (onboard mc146818a).
877 options CLK_USE_I8254_CALIBRATION
878 options CLK_USE_TSC_CALIBRATION
881 #####################################################################
884 # SCSI DEVICE CONFIGURATION
886 # The SCSI subsystem consists of the `base' SCSI code, a number of
887 # high-level SCSI device `type' drivers, and the low-level host-adapter
888 # device drivers. The host adapters are listed in the ISA and PCI
889 # device configuration sections below.
891 # Beginning with FreeBSD 2.0.5 you can wire down your SCSI devices so
892 # that a given bus, target, and LUN always come on line as the same
893 # device unit. In earlier versions the unit numbers were assigned
894 # in the order that the devices were probed on the SCSI bus. This
895 # means that if you removed a disk drive, you may have had to rewrite
896 # your /etc/fstab file, and also that you had to be careful when adding
897 # a new disk as it may have been probed earlier and moved your device
898 # configuration around.
900 # This old behavior is maintained as the default behavior. The unit
901 # assignment begins with the first non-wired down unit for a device
902 # type. For example, if you wire a disk as "da3" then the first
903 # non-wired disk will be assigned da4.
905 # The syntax for wiring down devices is:
907 # device scbus0 at ahc0 # Single bus device
908 # device scbus1 at ahc1 bus 0 # Single bus device
909 # device scbus3 at ahc2 bus 0 # Twin bus device
910 # device scbus2 at ahc2 bus 1 # Twin bus device
911 # device da0 at scbus0 target 0 unit 0
912 # device da1 at scbus3 target 1
913 # device da2 at scbus2 target 3
914 # device sa1 at scbus1 target 6
917 # "units" (SCSI logical unit number) that are not specified are
918 # treated as if specified as LUN 0.
920 # All SCSI devices allocate as many units as are required.
922 # The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
923 # configuration and doesn't have to be explicitly configured.
925 device scbus #base SCSI code
926 device ch #SCSI media changers
927 device da #SCSI direct access devices (aka disks)
928 device sa #SCSI tapes
929 device cd #SCSI CD-ROMs
930 device pass #CAM passthrough driver
931 device sg #Passthrough device (linux scsi generic)
932 device pt #SCSI processor type
933 device ses #SCSI SES/SAF-TE driver
935 # Options for device mapper
939 device iscsi_initiator
940 options ISCSI_INITIATOR_DEBUG=8
944 # -- NOTE -- If you specify one of the bus/target/lun options, you must
946 # CAMDEBUG: When defined enables debugging macros
947 # CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses.
948 # CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets.
949 # CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns.
950 # CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
951 # CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
953 # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
954 # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
955 # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
956 # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
957 # queue after a bus reset, and the number of milliseconds to
958 # freeze the device queue after a bus device reset. This
959 # can be changed at boot and runtime with the
960 # kern.cam.scsi_delay tunable/sysctl.
962 options CAM_DEBUG_BUS=-1
963 options CAM_DEBUG_TARGET=-1
964 options CAM_DEBUG_LUN=-1
965 options CAM_DEBUG_FLAGS="CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB"
966 options CAM_MAX_HIGHPOWER=4
967 options SCSI_NO_SENSE_STRINGS
968 options SCSI_NO_OP_STRINGS
969 options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device
971 # Options for the CAM CDROM driver:
972 # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
973 # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
974 # enforced if there is I/O waiting for another LUN
975 # The compiled in defaults for these variables are 2 and 10 seconds,
978 # These can also be changed on the fly with the following sysctl variables:
979 # kern.cam.cd.changer.min_busy_seconds
980 # kern.cam.cd.changer.max_busy_seconds
982 options CHANGER_MIN_BUSY_SECONDS=2
983 options CHANGER_MAX_BUSY_SECONDS=10
985 # Options for the CAM sequential access driver:
986 # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes
987 # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
988 # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
989 # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
990 # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
991 options SA_IO_TIMEOUT="(4)"
992 options SA_SPACE_TIMEOUT="(60)"
993 options SA_REWIND_TIMEOUT="(2*60)"
994 options SA_ERASE_TIMEOUT="(4*60)"
995 options SA_1FM_AT_EOD
997 # Optional timeout for the CAM processor target (pt) device
998 # This is specified in seconds. The default is 60 seconds.
999 options SCSI_PT_DEFAULT_TIMEOUT="60"
1001 # Optional enable of doing SES passthrough on other devices (e.g., disks)
1003 # Normally disabled because a lot of newer SCSI disks report themselves
1004 # as having SES capabilities, but this can then clot up attempts to build
1005 # build a topology with the SES device that's on the box these drives
1007 options SES_ENABLE_PASSTHROUGH
1010 #####################################################################
1011 # MISCELLANEOUS DEVICES AND OPTIONS
1013 # The `pty' device usually turns out to be ``effectively mandatory'',
1014 # as it is required for `telnetd', `rlogind', `screen', `emacs', and
1015 # `xterm', among others.
1017 pseudo-device pty #Pseudo ttys
1018 pseudo-device gzip #Exec gzipped a.out's
1019 pseudo-device vn #Vnode driver (turns a file into a device)
1020 pseudo-device md #Memory/malloc disk
1021 pseudo-device snp #Snoop device - to look at pty/vty/etc..
1022 pseudo-device ccd 4 #Concatenated disk driver
1024 # Configuring Vinum into the kernel is not necessary, since the kld
1025 # module gets started automatically when vinum(8) starts. This
1026 # device is also untested. Use at your own risk.
1028 # The option VINUMDEBUG must match the value set in CFLAGS
1029 # in src/sbin/vinum/Makefile. Failure to do so will result in
1030 # the following message from vinum(8):
1032 # Can't get vinum config: Invalid argument
1034 # see vinum(4) for more reasons not to use these options.
1035 pseudo-device vinum #Vinum concat/mirror/raid driver
1036 options VINUMDEBUG #enable Vinum debugging hooks
1038 # Kernel side iconv library
1041 # Size of the kernel message buffer. Should be N * pagesize.
1042 options MSGBUF_SIZE=40960
1045 #####################################################################
1046 # HARDWARE DEVICE CONFIGURATION
1048 # ISA and EISA devices:
1049 # EISA support is available for some device, so they can be auto-probed.
1052 # Mandatory ISA devices: isa, npx
1056 # ISA-PnP BIOS support
1060 # Options for `isa':
1062 # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A
1063 # interrupt controller. This saves about 0.7-1.25 usec for each interrupt.
1064 # This option breaks suspend/resume on some portables.
1066 # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A
1067 # interrupt controller. This saves about 0.7-1.25 usec for each interrupt.
1068 # Automatic EOI is documented not to work for for the slave with the
1069 # original i8259A, but it works for some clones and some integrated
1072 # MAXMEM specifies the amount of RAM on the machine; if this is not
1073 # specified, DragonFly will first read the amount of memory from the CMOS
1074 # RAM, so the amount of memory will initially be limited to 64MB or 16MB
1075 # depending on the BIOS. If the BIOS reports 64MB, a memory probe will
1076 # then attempt to detect the installed amount of RAM. If this probe
1077 # fails to detect >64MB RAM you will have to use the MAXMEM option.
1078 # The amount is in kilobytes, so for a machine with 128MB of RAM, it would
1079 # be 131072 (128 * 1024).
1081 # BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to
1082 # reset the CPU for reboot. This is needed on some systems with broken
1083 # keyboard controllers.
1085 options COMPAT_OLDISA #FreeBSD 2.2 and 3.x compatibility shims
1088 options MAXMEM="(128*1024)"
1089 #options BROKEN_KEYBOARD_RESET
1091 # Enable support for the kernel PLL to use an external PPS signal,
1092 # under supervision of [x]ntpd(8)
1093 # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
1097 # The keyboard controller; it controls the keyboard and the PS/2 mouse.
1098 device atkbdc0 at isa? port IO_KBD
1101 device atkbd0 at atkbdc? irq 1
1103 # Options for atkbd:
1104 options ATKBD_DFLT_KEYMAP # specify the built-in keymap
1105 makeoptions ATKBD_DFLT_KEYMAP="jp.106"
1107 # These options are valid for other keyboard drivers as well.
1108 options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
1109 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
1111 # `flags' for atkbd:
1112 # 0x01 Force detection of keyboard, else we always assume a keyboard
1113 # 0x02 Don't reset keyboard, useful for some newer ThinkPads
1114 # 0x03 Force detection and avoid reset, might help with certain
1116 # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
1119 device psm0 at atkbdc? irq 12
1122 options PSM_HOOKRESUME #hook the system resume event, useful
1124 options PSM_RESETAFTERSUSPEND #reset the device at the resume event
1126 device kbdmux # keyboard multiplexer
1128 # The video card driver.
1132 # Try the following option if the mouse pointer is not drawn correctly
1133 # or font does not seem to be loaded properly. May cause flicker on
1135 options VGA_ALT_SEQACCESS
1137 options VGA_DEBUG=2 # enable VGA debug output
1139 # If you experience problems switching back to 80x25 (or a derived mode),
1140 # the following option might help.
1141 #options VGA_KEEP_POWERON_MODE # use power-on settings for 80x25
1143 # If you can dispense with some vga driver features, you may want to
1144 # use the following options to save some memory.
1145 #options VGA_NO_FONT_LOADING # don't save/load font
1146 #options VGA_NO_MODE_CHANGE # don't change video modes
1148 # The following option probably won't work with the LCD displays.
1149 options VGA_WIDTH90 # support 90 column modes
1151 # To include support for VESA video modes
1153 options VESA_DEBUG=2 # enable VESA debug output
1155 # Splash screen at start up! Screen savers require this too.
1156 pseudo-device splash
1158 # The syscons console driver (sco color console compatible).
1160 options MAXCONS=16 # number of virtual consoles
1161 options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode
1162 options SC_DEBUG_LEVEL=5 # enable debug output
1163 options SC_DFLT_FONT # compile font in
1164 makeoptions SC_DFLT_FONT=cp850
1165 options SC_DISABLE_DDBKEY # disable `debug' key
1166 options SC_DISABLE_REBOOT # disable reboot key sequence
1167 options SC_HISTORY_SIZE=200 # number of history buffer lines
1168 options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor
1169 options SC_PIXEL_MODE # add support for the raster text mode
1171 # The following options will let you change the default colors of syscons.
1172 options SC_NORM_ATTR="(FG_GREEN|BG_BLACK)"
1173 options SC_NORM_REV_ATTR="(FG_YELLOW|BG_GREEN)"
1174 options SC_KERNEL_CONS_ATTR="(FG_RED|BG_BLACK)"
1175 options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_RED)"
1177 # If you have a two button mouse, you may want to add the following option
1178 # to use the right button of the mouse to paste text.
1179 options SC_TWOBUTTON_MOUSE
1181 # You can selectively disable features in syscons.
1182 #options SC_NO_CUTPASTE
1183 #options SC_NO_FONT_LOADING
1184 #options SC_NO_HISTORY
1185 #options SC_NO_SYSMOUSE
1188 # The Numeric Processing eXtension driver. In addition to this, you
1189 # may configure a math emulator (see above). If your machine has a
1190 # hardware FPU and the kernel configuration includes the npx device
1191 # *and* a math emulator compiled into the kernel, the hardware FPU
1192 # will be used, unless it is found to be broken or unless "flags" to
1193 # npx0 includes "0x08", which requests preference for the emulator.
1194 device npx0 at nexus? port IO_NPX flags 0x0 irq 13
1198 # 0x01 don't use the npx registers to optimize bcopy.
1199 # 0x02 don't use the npx registers to optimize bzero.
1200 # 0x04 don't use the npx registers to optimize copyin or copyout.
1201 # 0x08 use emulator even if hardware FPU is available.
1202 # The npx registers are normally used to optimize copying and zeroing when
1203 # all of the following conditions are satisfied:
1204 # I586_CPU is an option
1205 # the cpu is an i586 (perhaps not a Pentium)
1206 # the probe for npx0 succeeds
1207 # INT 16 exception handling works.
1208 # Then copying and zeroing using the npx registers is normally 30-100% faster.
1209 # The flags can be used to control cases where it doesn't work or is slower.
1210 # Setting them at boot time using userconfig works right (the optimizations
1211 # are not used until later in the bootstrap when npx0 is attached).
1212 # Flag 0x08 automatically disables the i586 optimized routines.
1216 # Optional ISA and EISA devices:
1220 # SCSI host adapters: `aha', `aic', `bt'
1222 # adv: All Narrow SCSI bus AdvanSys controllers.
1223 # adw: Second Generation AdvanSys controllers including the ADV940UW.
1225 # ahc: Adaptec 274x/284x/294x
1227 # bt: Most Buslogic controllers
1228 # ncv: NCR 53C500 based SCSI host adapters.
1229 # nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters.
1230 # stg: TMC 18C30, 18C50 based ISA/PC Card SCSI host adapters.
1232 # Note that the order is important in order for Buslogic cards to be
1236 device bt0 at isa? port IO_BT0
1243 device stg0 at isa? port 0x140 irq 11
1246 # Adaptec FSA RAID controllers, including integrated DELL controller,
1247 # the Dell PERC 2/QC and the HP NetRAID-4M
1251 device aacp # SCSI Passthrough interface (optional, CAM required)
1254 # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
1255 # one entry is needed; the code will find and configure all supported
1258 device ida # Compaq Smart RAID
1259 device mlx # Mylex DAC960
1260 device amr # AMI MegaRAID
1263 # Areca RAID (CAM is required).
1265 device arcmsr # Areca SATA II RAID
1270 device twe # 3ware ATA RAID
1271 device twa # 3ware 9000 series PATA/SATA RAID
1272 options TWA_DEBUG=10 # enable debug messages
1275 # Promise Supertrack SX6000
1285 # The 'ATA' driver supports all ATA and ATAPI devices.
1286 # You only need one "device ata" for it to find all
1287 # PCI ATA/ATAPI devices on modern machines.
1289 #device atadisk # ATA disk drives
1290 #device atapicd # ATAPI CDROM drives
1291 #device atapifd # ATAPI floppy drives
1292 #device atapist # ATAPI tape drives
1293 #device atapicam # emulate ATAPI devices as SCSI ditto via CAM
1294 # needs CAM to be present (scbus & pass)
1295 # AHCI driver, this will override NATA for AHCI devices,
1296 # both drivers may be included.
1300 # SiI3124/3132 driver
1304 # The 'NATA' set of drivers are set to replace the previous ATA drivers,
1305 # and this set of drivers is mutually exclusive with the old ones. This means,
1306 # you can't have both at the same time!
1308 device natadisk # ATA disk drives
1309 device natapicd # ATAPI CD/DVD drives
1310 device natapifd # ATAPI floppy drives
1311 device natapist # ATAPI tape drives
1312 device natapicam # ATAPI CAM layer emulation
1313 device nataraid # support for ATA software RAID controllers
1314 device natausb # ATA-over-USB support
1316 #The following options are valid on the ATA & NATA drivers:
1318 # ATA_STATIC_ID: controller numbering is static (like the old driver)
1319 # else the device numbers are dynamically allocated.
1320 options ATA_STATIC_ID
1323 # For older non-PCI systems, these are the lines to use:
1324 #device ata0 at isa? port IO_WD1 irq 14
1325 #device ata1 at isa? port IO_WD2 irq 15
1328 # Standard floppy disk controllers: `fdc' and `fd'
1330 device fdc0 at isa? port IO_FD1 irq 6 drq 2
1332 # FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
1333 # gotta turn it actually on by setting the variable fd_debug with DDB,
1337 device fd0 at fdc0 drive 0
1338 device fd1 at fdc0 drive 1
1341 # Other standard PC hardware: `mse', `sio', etc.
1343 # mse: Logitech and ATI InPort bus mouse ports
1344 # sio: serial ports (see sio(4))
1346 device mse0 at isa? port 0x23c irq 5
1348 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
1351 # `flags' for serial drivers that support consoles (only for sio now):
1352 # 0x10 enable console support for this unit. The other console flags
1353 # are ignored unless this is set. Enabling console support does
1354 # not make the unit the preferred console - boot with -h or set
1355 # the 0x20 flag for that. Currently, at most one unit can have
1356 # console support; the first one (in config file order) with
1357 # this flag set is preferred. Setting this flag for sio0 gives
1358 # the old behaviour.
1359 # 0x20 force this unit to be the console (unless there is another
1360 # higher priority console). This replaces the COMCONSOLE option.
1361 # 0x40 reserve this unit for low level console operations. Do not
1362 # access the device in any normal way.
1363 # 0x80 use this port for serial line gdb support in ddb.
1365 # PnP `flags' (set via userconfig using pnp x flags y)
1366 # 0x1 disable probing of this device. Used to prevent your modem
1367 # from being attached as a PnP modem.
1370 # Options for serial drivers that support consoles (only for sio now):
1371 options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
1373 options CONSPEED=115200 # speed for serial console
1376 # Solaris implements a new BREAK which is initiated by a character
1377 # sequence CR ~ ^b which is similar to a familiar pattern used on
1378 # Sun servers by the Remote Console.
1379 options ALT_BREAK_TO_DEBUGGER
1382 options COM_ESP #code for Hayes ESP
1383 options COM_MULTIPORT #code for some cards with shared IRQs
1385 # Other flags for sio that aren't documented in the man page.
1386 # 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for
1387 # ST16650A-compatible UARTs.
1389 # PCI Universal Communications driver
1390 # Supports various single and multi port PCI serial cards. Maybe later
1391 # also the parallel ports on combination serial/parallel cards. New cards
1392 # can be added in src/sys/dev/misc/puc/pucdata.c.
1396 # Network interfaces: `ed', `el', `ep', `ie', `is', `le', `lnc'
1398 # ar: Arnet SYNC/570i hdlc sync 2/4 port V.35/X.21 serial driver (requires sppp)
1399 # cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters
1400 # ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503
1401 # el: 3Com 3C501 (slow!)
1403 # ex: Intel EtherExpress Pro/10 and other i82595-based adapters
1404 # fe: Fujitsu MB86960A/MB86965A Ethernet
1405 # ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210; Intel EtherExpress
1406 # le: Digital Equipment EtherWorks 2 and EtherWorks 3 (DEPCA, DE100,
1407 # DE101, DE200, DE201, DE202, DE203, DE204, DE205, DE422)
1408 # lnc: Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL, AMD Am7990 & Am79C960)
1409 # rdp: RealTek RTL 8002-based pocket ethernet adapters
1410 # sbni: Granch SBNI12-xx adapters
1411 # sbsh: Granch SBNI16 SHDSL modem PCI adapters
1412 # sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp)
1413 # wl: Lucent Wavelan (ISA card only).
1414 # wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
1415 # the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
1416 # bridge with a PCMCIA adapter plugged into it.
1417 # an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
1418 # PCI and ISA varieties.
1419 # xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller.
1421 device ar0 at isa? port 0x300 irq 10 iomem 0xd0000
1422 device cs0 at isa? port 0x300
1423 device ed0 at isa? port 0x280 irq 5 iomem 0xd8000
1424 device el0 at isa? port 0x300 irq 9
1427 device fe0 at isa? port 0x300
1428 device ie0 at isa? port 0x300 irq 5 iomem 0xd0000
1429 device ie1 at isa? port 0x360 irq 7 iomem 0xd0000
1430 device le0 at isa? port 0x300 irq 5 iomem 0xd0000
1431 device lnc0 at isa? port 0x280 irq 10 drq 0
1432 device rdp0 at isa? port 0x378 irq 7 flags 2
1433 device sbni0 at isa? port 0x210 irq 5 flags 0xefdead
1436 device sn0 at isa? port 0x300 irq 10
1438 # Wlan support is mandatory for some wireless LAN devices.
1439 options IEEE80211_DEBUG #enable debugging msgs
1440 options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's
1441 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
1442 options IEEE80211_SUPPORT_TDMA #enable TDMA support
1443 device wlan # 802.11 support
1444 device wlan_acl # 802.11 MAC-based access control for AP
1445 device wlan_ccmp # 802.11 CCMP support
1446 device wlan_tkip # 802.11 TKIP support
1447 device wlan_wep # 802.11 WEP support
1448 device wlan_xauth # 802.11 WPA or 802.1x authentication for AP
1449 device wlan_amrr # 802.11 AMRR TX rate control algorithm
1450 options WLCACHE # enables the signal-strength cache
1451 options WLDEBUG # enables verbose debugging output
1452 device an # Aironet Communications 4500/4800
1453 device ath # Atheros AR521x
1454 options AH_SUPPORT_AR5416
1455 device ath_hal # Atheros Hardware Access Layer
1456 #device ath_rate_amrr # Atheros AMRR TX rate control algorithm
1457 #device ath_rate_onoe # Atheros Onoe TX rate control algorithm
1458 device ath_rate_sample # Atheros Sample TX rate control algorithm
1459 options ATH_DEBUG # turn on debugging output (see hw.ath.debug)
1460 options ATH_DIAGAPI # diagnostic interface to the HAL
1461 options ATH_RXBUF=80 # number of RX buffers to allocate
1462 options ATH_TXBUF=400 # number of TX buffers to allocate
1463 #device iwl # Intel PRO/Wireless 2100
1464 #device iwi # Intel PRO/Wireless 2200BG/2915ABG
1465 device iwn # Intel WiFi Link 4965/1000/5000/5150/5300/6000/6050
1466 device wi # WaveLAN/IEEE, PRISM-II, Spectrum24 802.11DS
1467 #device rtw # RealTek 8180
1468 #device acx # TI ACX100/ACX111.
1469 device wl0 at isa? port 0x300 # T1 speed ISA/radio lan
1470 device xe # Xircom PCMCIA
1471 device ral # Ralink Technology 802.11 wireless NIC
1474 # IEEE 802.11 adapter firmware modules
1476 # iwifw: Intel PRO/Wireless 2200BG/2225BG/2915ABG firmware
1477 # iwnfw: Intel WiFi Link 4965/1000/5000/5150/5300/6000/6050
1478 # ralfw: Ralink Technology RT25xx and RT26xx firmware
1479 # wpifw: Intel 3945ABG Wireless LAN Controller firmware
1487 # ATM related options
1489 # The `en' device provides support for Efficient Networks (ENI)
1490 # ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
1492 # atm pseudo-device provides generic atm functions and is required for
1494 # NATM enables the netnatm protocol family that can be used to
1497 # the current driver supports only PVC operations (no atm-arp, no multicast).
1498 # for more details, please read the original documents at
1499 # http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
1503 options NATM #native ATM
1507 # The flags of the device tells the device a bit more info about the
1508 # device that normally is obtained through the PnP interface.
1509 # bit 2..0 secondary DMA channel;
1510 # bit 4 set if the board uses two dma channels;
1511 # bit 15..8 board type, overrides autodetection; leave it
1512 # zero if don't know what to put in (and you don't,
1513 # since this is unsupported at the moment...).
1515 # This driver will use the new PnP code if it's available. You might
1516 # need PNPBIOS for ISA devices.
1518 # If you have a GUS-MAX card and want to use the CS4231 codec on the
1519 # card the drqs for the gus max must be 8 bit (1, 2, or 3).
1521 # If you would like to use the full duplex option on the gus, then define
1522 # flags to be the ``read dma channel''.
1525 # Basic sound card support:
1527 # For PnP/PCI sound cards:
1529 device "snd_als4000"
1535 device "snd_emu10k1"
1541 device "snd_maestro"
1542 device "snd_maestro3"
1544 device "snd_neomagic"
1549 device "snd_t4dwave"
1550 device "snd_via8233"
1551 device "snd_via82c686"
1553 # For non-pnp sound cards:
1554 device pcm0 at isa? irq 10 drq 1 flags 0x0
1559 # Miscellaneous hardware:
1561 # wt: Wangtek and Archive QIC-02/QIC-36 tape drives
1562 # ctx: Cortex-I frame grabber
1563 # apm: Laptop Advanced Power Management (experimental)
1564 # spigot: The Creative Labs Video Spigot video-acquisition board
1565 # meteor: Matrox Meteor video capture board
1566 # bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
1567 # cy: Cyclades serial driver
1568 # dgb: Digiboard PC/Xi and PC/Xe series driver (ALPHA QUALITY!)
1569 # dgm: Digiboard PC/Xem driver
1570 # gp: National Instruments AT-GPIB and AT-GPIB/TNT board
1571 # asc: GI1904-based hand scanners, e.g. the Trust Amiscan Grey
1572 # gsc: Genius GS-4500 hand scanner.
1574 # labpc: National Instrument's Lab-PC and Lab-PC+
1575 # rc: RISCom/8 multiport card
1576 # rp: Comtrol Rocketport(ISA) - single card
1577 # tw: TW-523 power line interface for use with X-10 home control products
1578 # si: Specialix SI/XIO 4-32 port terminal multiplexor
1579 # spic: Sony Programmable I/O controller (VAIO notebooks)
1580 # stl: Stallion EasyIO and EasyConnection 8/32 (ISA and PCI), EasyConnection 8/64 PCI
1581 # stli: Stallion EasyConnection 8/64 ISA/EISA, ONboard, Brumby (intelligent)
1582 # nmdm: nullmodem terminal driver (see nmdm(4))
1585 # The flags takes the following meaning for apm0:
1586 # 0x0020 Statclock is broken.
1587 # If apm is omitted, some systems require sysctl -w kern.timecounter.method=1
1588 # for correct timekeeping.
1590 # Notes on the spigot:
1591 # The video spigot is at 0xad6. This port address can not be changed.
1592 # The irq values may only be 10, 11, or 15
1593 # I/O memory is an 8kb region. Possible values are:
1594 # 0a0000, 0a2000, ..., 0fffff, f00000, f02000, ..., ffffff
1595 # The start address must be on an even boundary.
1596 # Add the following option if you want to allow non-root users to be able
1597 # to access the spigot. This option is not secure because it allows users
1598 # direct access to the I/O page.
1599 # options SPIGOT_UNSECURE
1601 # Notes on the Comtrol Rocketport driver:
1603 # The exact values used for rp0 depend on how many boards you have
1604 # in the system. The manufacturer's sample configs are listed as:
1606 # Comtrol Rocketport ISA single card
1607 # device rp0 at isa? port 0x280
1609 # If instead you have two ISA cards, one installed at 0x100 and the
1610 # second installed at 0x180, then you should add the following to
1611 # your kernel configuration file:
1613 # device rp0 at isa? port 0x100
1614 # device rp1 at isa? port 0x180
1616 # For 4 ISA cards, it might be something like this:
1618 # device rp0 at isa? port 0x180
1619 # device rp1 at isa? port 0x100
1620 # device rp2 at isa? port 0x340
1621 # device rp3 at isa? port 0x240
1623 # And for PCI cards, you only need say:
1627 # Notes on the Digiboard driver:
1629 # The following flag values have special meanings:
1630 # 0x01 - alternate layout of pins (dgb & dgm)
1631 # 0x02 - use the windowed PC/Xe in 64K mode (dgb only)
1633 # Notes on the Specialix SI/XIO driver:
1634 # **This is NOT a Specialix supported Driver!**
1635 # The host card is memory, not IO mapped.
1636 # The Rev 1 host cards use a 64K chunk, on a 32K boundary.
1637 # The Rev 2 host cards use a 32K chunk, on a 32K boundary.
1638 # The cards can use an IRQ of 11, 12 or 15.
1640 # Notes on the Stallion stl and stli drivers:
1641 # See src/sys/platform/pc32/isa/README.stl for complete instructions.
1642 # This is version 2.0.0, unsupported by Stallion.
1643 # The stl driver has a secondary IO port hard coded at 0x280. You need
1644 # to change src/sys/dev/serial/stl/stallion.c if you reconfigure this on the boards.
1645 # The "flags" and "iosiz" settings on the stli driver depend on the board:
1646 # EasyConnection 8/64 ISA: flags 23 iosiz 0x1000
1647 # EasyConnection 8/64 EISA: flags 24 iosiz 0x10000
1648 # ONboard ISA: flags 4 iosiz 0x10000
1649 # ONboard EISA: flags 7 iosiz 0x10000
1650 # Brumby: flags 2 iosiz 0x4000
1651 # Stallion: flags 1 iosiz 0x10000
1652 # For the PCI cards, "device stl" will suffice.
1654 # for the SoundBlaster 16 multicd - up to 4 devices
1655 device wt0 at isa? port 0x300 irq 5 drq 1
1656 device ctx0 at isa? port 0x230 iomem 0xd0000
1657 device spigot0 at isa? port 0xad6 irq 15 iomem 0xee000
1659 device gp0 at isa? port 0x2c0
1660 device gsc0 at isa? port IO_GSC1 drq 3
1661 device joy0 at isa? port IO_GAME
1662 device cy0 at isa? irq 10 iomem 0xd4000 iosiz 0x2000
1663 #device dgb0 at isa? port 0x220 iomem 0xfc000
1664 #options NDGBPORTS=16 # Defaults to 16*NDGB
1665 device dgm0 at isa? port 0x104 iomem 0xd0000
1666 device labpc0 at isa? port 0x260 irq 5
1667 device rc0 at isa? port 0x220 irq 12
1669 #device rp0 at isa? port 0x280
1670 # the port and irq for tw0 are fictitious
1671 device tw0 at isa? port 0x380 irq 11
1672 device si0 at isa? iomem 0xd0000 irq 12
1673 device asc0 at isa? port IO_ASC1 drq 3 irq 10
1674 device spic0 at isa? irq 0 port 0x10a0
1675 device stl0 at isa? port 0x2a0 irq 10
1676 device stli0 at isa? port 0x2a0 iomem 0xcc000 flags 23 iosiz 0x1000
1677 # nullmodem terminal driver
1683 # The EISA bus device is `eisa'. It provides auto-detection and
1684 # configuration support for all devices on the EISA bus.
1686 # The `ahb' device provides support for the Adaptec 174X adapter.
1688 # The `ahc' device provides support for the Adaptec 274X and 284X
1689 # adapters. The 284X, although a VLB card, responds to EISA probes.
1694 # The aic7xxx driver will attempt to use memory mapped I/O for all PCI
1695 # controllers that have it configured only if this option is set. Unfortunately,
1696 # this doesn't work on some motherboards, which prevents it from being the
1698 options AHC_ALLOW_MEMIO
1700 # The adw driver will attempt to use memory mapped I/O for all PCI
1701 # controllers that have it configured only if this option is set.
1702 options ADW_ALLOW_MEMIO
1704 # By default, only 10 EISA slots are probed, since the slot numbers
1705 # above clash with the configuration address space of the PCI subsystem,
1706 # and the EISA probe is not very smart about this. This is sufficient
1707 # for most machines, but in particular the HP NetServer LC series comes
1708 # with an onboard AIC7770 dual-channel SCSI controller on EISA slot #11,
1709 # thus you need to bump this figure to 12 for them.
1710 options EISA_SLOTS=12
1713 # PCI devices & PCI options:
1715 # The main PCI bus device is `pci'. It provides auto-detection and
1716 # configuration support for all devices on the PCI bus, using either
1717 # configuration mode defined in the PCI specification.
1723 #Enable pci resources left off by a "lazy" BIOS.
1725 options COMPAT_OLDPCI #FreeBSD 2.2 and 3.x compatibility shims
1732 # The `ahc' device provides support for the Adaptec 29/3940(U)(W)
1733 # and motherboard based AIC7870/AIC7880 adapters.
1735 options AHC_DEBUG_OPTS=0xffffffff
1736 options AHC_REG_PRETTY_PRINT
1737 options AHC_TMODE_ENABLE
1739 # The 'ahd' device provides support for the Adaptec 79xx Ultra320
1740 # SCSI adapters. Options are documented in the ahd(4) manpage:
1742 options AHD_DEBUG_OPTS=0xffffffff
1743 options AHD_REG_PRETTY_PRINT
1744 #options AHD_TMODE_ENABLE=0xff
1746 # The `amd' device provides support for the AMD 53C974 SCSI host
1747 # adapter chip as found on devices such as the Tekram DC-390(T).
1749 # The `bge' device provides support for gigabit ethernet adapters
1750 # based on the Broadcom BCM570x family of controllers, including the
1751 # 3Com 3c996-T, the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41,
1752 # and the embedded gigE NICs on Dell PowerEdge 2550 servers.
1754 # The `ncr' device provides support for the NCR 53C810 and 53C825
1755 # self-contained SCSI host adapters.
1757 # The `isp' device provides support for the Qlogic ISP 1020, 1040
1758 # nd 1040B PCI SCSI host adapters, ISP 1240 Dual Ultra SCSI,
1759 # ISP 1080 and 1280 (Dual) Ultra2, ISP 12160 Ultra3 SCSI, as well as
1760 # the Qlogic ISP 2100 and ISP 2200 Fibre Channel Host Adapters.
1762 # The `dc' device provides support for PCI fast ethernet adapters
1763 # based on the DEC/Intel 21143 and various workalikes including:
1764 # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1765 # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1766 # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1767 # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
1768 # replaces the old al, ax, dm, pn and mx drivers. List of brands:
1769 # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
1770 # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
1771 # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
1774 # The `de' device provides support for the Digital Equipment DC21040
1775 # self-contained Ethernet adapter.
1777 # The `em' device provides support for the Intel Pro/1000 Family of Gigabit
1778 # adapters (82542, 82543, 82544, 82540).
1780 # The `et' device provides support for the Agere ET1310 10/100/1000 PCIe
1783 # The `fxp' device provides support for the Intel EtherExpress Pro/100B
1784 # PCI Fast Ethernet adapters.
1786 # The 'lge' device provides support for PCI gigabit ethernet adapters
1787 # based on the Level 1 LXT1001 NetCellerator chipset. This includes the
1788 # D-Link DGE-500SX, SMC TigerCard 1000 (SMC9462SX), and some Addtron cards.
1790 # The 'my' device provides support for the Myson MTD80X and MTD89X PCI
1791 # Fast Ethernet adapters.
1793 # The 'nge' device provides support for PCI gigabit ethernet adapters
1794 # based on the National Semiconductor DP83820 and DP83821 chipset. This
1795 # includes the SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante
1796 # FriendlyNet GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the
1797 # LinkSys EG1032 and EG1064, the Surecom EP-320G-TX and the Netgear GA622T.
1799 # The 'pcn' device provides support for PCI fast ethernet adapters based
1800 # on the AMD Am79c97x chipsets, including the PCnet/FAST, PCnet/FAST+,
1801 # PCnet/PRO and PCnet/Home. These were previously handled by the lnc
1802 # driver (and still will be if you leave this driver out of the kernel).
1804 # Te 're' device provides support for PCI GigaBit ethernet adapters based
1805 # on the RealTek 8169 chipset. It also supports the 8139C+ and is the
1806 # preferred driver for that chip.
1808 # The 'rl' device provides support for PCI fast ethernet adapters based
1809 # on the RealTek 8129/8139 chipset. Note that the RealTek driver defaults
1810 # to using programmed I/O to do register accesses because memory mapped
1811 # mode seems to cause severe lockups on SMP hardware. This driver also
1812 # supports the Accton EN1207D `Cheetah' adapter, which uses a chip called
1813 # the MPX 5030/5038, which is either a RealTek in disguise or a RealTek
1814 # workalike. Note that the D-Link DFE-530TX+ uses the RealTek chipset
1815 # and is supported by this driver, not the 'vr' driver.
1817 # The 'sf' device provides support for Adaptec Duralink PCI fast
1818 # ethernet adapters based on the Adaptec AIC-6915 "starfire" controller.
1819 # This includes dual and quad port cards, as well as one 100baseFX card.
1820 # Most of these are 64-bit PCI devices, except for one single port
1821 # card which is 32-bit.
1823 # The 'ste' device provides support for adapters based on the Sundance
1824 # Technologies ST201 PCI fast ethernet controller. This includes the
1827 # The 'sis' device provides support for adapters based on the Silicon
1828 # Integrated Systems SiS 900 and SiS 7016 PCI fast ethernet controller
1831 # The 'sk' device provides support for the SysKonnect SK-984x series
1832 # PCI gigabit ethernet NICs. This includes the SK-9841 and SK-9842
1833 # single port cards (single mode and multimode fiber) and the
1834 # SK-9843 and SK-9844 dual port cards (also single mode and multimode).
1835 # The driver will autodetect the number of ports on the card and
1836 # attach each one as a separate network interface.
1838 # The 'ti' device provides support for PCI gigabit ethernet NICs based
1839 # on the Alteon Networks Tigon 1 and Tigon 2 chipsets. This includes the
1840 # Alteon AceNIC, the 3Com 3c985, the Netgear GA620 and various others.
1841 # Note that you will probably want to bump up NMBCLUSTERS a lot to use
1844 # The 'tl' device provides support for the Texas Instruments TNETE100
1845 # series 'ThunderLAN' cards and integrated ethernet controllers. This
1846 # includes several Compaq Netelligent 10/100 cards and the built-in
1847 # ethernet controllers in several Compaq Prosignia, Proliant and
1848 # Deskpro systems. It also supports several Olicom 10Mbps and 10/100
1851 # The `tx' device provides support for the SMC 9432 TX, BTX and FTX cards.
1853 # The `txp' device provides support for the 3Com 3cR990 "Typhoon"
1856 # The `vr' device provides support for various fast ethernet adapters
1857 # based on the VIA Technologies VT3043 `Rhine I' and VT86C100A `Rhine II'
1858 # chips, including the D-Link DFE530TX (see 'rl' for DFE530TX+), the Hawking
1859 # Technologies PN102TX, and the AOpen/Acer ALN-320.
1861 # The `vx' device provides support for the 3Com 3C590 and 3C595
1864 # The `wb' device provides support for various fast ethernet adapters
1865 # based on the Winbond W89C840F chip. Note: this is not the same as
1866 # the Winbond W89C940F, which is an NE2000 clone.
1868 # The `xl' device provides support for the 3Com 3c900, 3c905 and
1869 # 3c905B (Fast) Etherlink XL cards and integrated controllers. This
1870 # includes the integrated 3c905B-TX chips in certain Dell Optiplex and
1871 # Dell Precision desktop machines and the integrated 3c905-TX chips
1872 # in Dell Latitude laptop docking stations.
1874 # The `meteor' device is a PCI video capture board. It can also have the
1875 # following options:
1876 # options METEOR_ALLOC_PAGES=xxx preallocate kernel pages for data entry
1877 # figure (ROWS*COLUMN*BYTES_PER_PIXEL*FRAME+PAGE_SIZE-1)/PAGE_SIZE
1878 # options METEOR_DEALLOC_PAGES remove all allocated pages on close(2)
1879 # options METEOR_DEALLOC_ABOVE=xxx remove all allocated pages above the
1880 # specified amount. If this value is below the allocated amount no action
1882 # options METEOR_SYSTEM_DEFAULT={METEOR_PAL|METEOR_NTSC|METEOR_SECAM}, used
1883 # for initialization of fps routine when a signal is not present.
1885 # The 'bktr' device is a PCI video capture device using the Brooktree
1886 # bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
1887 # TV card, eg Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
1888 # Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
1890 # options OVERRIDE_CARD=xxx
1891 # options OVERRIDE_TUNER=xxx
1892 # options OVERRIDE_MSP=1
1893 # options OVERRIDE_DBX=1
1894 # These options can be used to override the auto detection
1895 # The current values for xxx are found in src/sys/dev/video/bktr/bktr_card.h
1896 # Using sysctl(8) run-time overrides on a per-card basis can be made
1898 # options BKTR_SYSTEM_DEFAULT=BROOKTREE_PAL
1900 # options BKTR_SYSTEM_DEFAULT=BROOKTREE_NTSC
1901 # Specifes the default video capture mode.
1902 # This is required for Dual Crystal (28&35Mhz) boards where PAL is used
1903 # to prevent hangs during initialisation. eg VideoLogic Captivator PCI.
1905 # options BKTR_USE_PLL
1906 # PAL or SECAM users who have a 28Mhz crystal (and no 35Mhz crystal)
1907 # must enable PLL mode with this option. eg some new Bt878 cards.
1909 # options BKTR_GPIO_ACCESS
1910 # This enable IOCTLs which give user level access to the GPIO port.
1912 # options BKTR_NO_MSP_RESET
1913 # Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
1915 # options BKTR_430_FX_MODE
1916 # Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
1918 # options BKTR_SIS_VIA_MODE
1919 # Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
1920 # needed for some old SiS and VIA chipset motherboards.
1921 # This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
1922 # motherboards and motherboards with bad or incomplete PCI 2.1 support.
1923 # As a rough guess, old = before 1998
1925 # options BKTR_NEW_MSP34XX_DRIVER
1926 # Use new, more complete initialization scheme for the msp34* soundchip.
1927 # Should fix stereo autodetection if the old driver does only output
1930 # options BKTR_OVERRIDE_CARD=xxx
1931 # options BKTR_OVERRIDE_DBX=xxx
1932 # options BKTR_OVERRIDE_MSP=xxx
1933 # options BKTR_OVERRIDE_TUNER=xxx
1934 # These options can be used to select a specific device, regardless of
1935 # the autodetection and i2c device checks (see comments in bktr_card.c).
1937 device ahc # AHA2940 and onboard AIC7xxx devices
1938 device ahd # AIC79xx devices
1939 device amd # AMD 53C974 (Tekram DC-390(T))
1940 device isp # Qlogic family
1941 device ispfw # Firmware for QLogic HBAs
1942 device mpt # LSI '909 FC adapters
1943 device ncr # NCR/Symbios Logic
1944 device sym # NCR/Symbios Logic (newer chipsets)
1945 device trm # Tekram DC395U/UW/F and DC315U
1949 # ISP_TARGET_MODE - enable target mode operation
1950 #options ISP_TARGET_MODE=1
1952 # Options used in dev/sym/ (Symbios SCSI driver).
1953 #options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits)
1954 # Allows the ncr to take precedence
1955 # 1 (1<<0) -> 810a, 860
1956 # 2 (1<<1) -> 825a, 875, 885, 895
1957 # 4 (1<<2) -> 895a, 896, 1510d
1958 #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885
1959 # disabled:0 (default), enabled:1
1960 #options SYM_SETUP_PCI_PARITY #-PCI parity checking
1961 # disabled:0, enabled:1 (default)
1962 #options SYM_SETUP_MAX_LUN #-Number of LUNs supported
1963 # default:8, range:[1..64]
1966 # MII bus support is required for some PCI 10/100 ethernet NICs,
1967 # namely those which use MII-compliant transceivers or implement
1968 # transceiver control interfaces that operate like an MII. Adding
1969 # "device miibus0" to the kernel config pulls in support for
1970 # the generic miibus API and all of the PHY drivers, including a
1971 # generic one for PHYs that aren't specifically handled by an
1972 # individual driver.
1975 # PCI Ethernet NICs that use the common MII bus controller code.
1976 device ae # Attansic/Atheros L2 Fast Ethernet
1977 device alc # Atheros AR8131/AR8132
1978 device ale # Atheros AR8121/AR8113/AR8114
1979 device age # Attansic/Atheros L1 Gigabit Ethernet
1980 device bce # Broadcom NetXtreme II Gigabit Ethernet
1981 device bfe # Broadcom BCM440x 10/100 Ethernet
1982 device dc # DEC/Intel 21143 and various workalikes
1983 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
1984 device my # Myson Fast Ethernet (MTD80X, MTD89X)
1985 device pcn # AMD Am79C97x PCI 10/100 NICs
1986 device re # RealTek 8139C+/8169
1987 device rl # RealTek 8129/8139
1988 device sbsh # Granch SBNI16 SHDSL modem
1989 device sf # Adaptec AIC-6915 (``Starfire'')
1990 device sis # Silicon Integrated Systems SiS 900/SiS 7016
1991 device ste # Sundance ST201 (D-Link DFE-550TX)
1992 device tl # Texas Instruments ThunderLAN
1993 device tx # SMC EtherPower II (83c17x ``EPIC'')
1994 device vge # VIA 612x GigE
1995 device vr # VIA Rhine, Rhine II
1996 device wb # Winbond W89C840F
1997 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
1999 # PCI Ethernet NICs.
2000 device de # DEC/Intel DC21x4x (``Tulip'')
2001 device txp # 3Com 3cR990 (``Typhoon'')
2002 device vx # 3Com 3c590, 3c595 (``Vortex'')
2004 # Gigabit Ethernet NICs.
2005 device bge # Broadcom BCM570x (``Tigon III'')
2006 device em # Intel Pro/1000 (8254x,8257x)
2008 device emx # Intel Pro/1000 (8257{1,2,3,4})
2010 device ig_hal # Intel Pro/1000 hardware abstraction layer
2011 device et # Agere ET1310 10/100/1000 Ethernet
2012 device lge # Level 1 LXT1001 (``Mercury'')
2013 device mxge # Myricom Myri-10G 10GbE NIC
2014 device nfe # nVidia nForce2/3 MCP04/51/55 CK804
2015 device nge # NatSemi DP83820 and DP83821
2016 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
2017 device ti # Alteon (``Tigon I'', ``Tigon II'')
2018 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
2019 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
2020 device jme # JMicron Gigabit/Fast Ethernet
2025 # Brooktree driver has been ported to the new I2C framework. Thus,
2026 # you'll need to have the following 3 lines in the kernel config.
2030 # The iic and smb devices are only needed if you want to control other
2031 # I2C slaves connected to the external connector of some cards.
2034 options BKTR_NEW_MSP34XX_DRIVER
2036 # WinTV PVR-250/350 driver
2042 # pccard: pccard slots
2043 # cardbus/cbb: cardbus bridge
2049 # Laptop/Notebook options:
2052 # apm under `Miscellaneous hardware'
2055 # For older notebooks that signal a powerfail condition (external
2056 # power supply dropped, or battery state low) by issuing an NMI:
2058 options POWERFAIL_NMI # make it beep instead of panicing
2064 # mmcsd MMC/SD memory card
2065 # sdhci Generic PCI SD Host Controller
2074 # System Management Bus support is provided by the 'smbus' device.
2075 # Access to the SMBus device is via the 'smb' device (/dev/smb*),
2076 # which is a child of the 'smbus' device.
2078 # Supported devices:
2079 # smb standard io through /dev/smb*
2081 # Supported SMB interfaces:
2082 # iicsmb I2C to SMB bridge with any iicbus interface
2083 # bktr brooktree848 I2C hardware interface
2084 # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit
2085 # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
2086 # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
2087 # viapm VIA VT82C586B,596,686A and VT8233 SMBus controllers
2088 # amdpm AMD 756 Power Management Unit
2089 # amdsmb AMD 8111 SMBus 2.0 Controller
2091 device smbus # Bus support, required for smb below.
2105 # Philips i2c bus support is provided by the `iicbus' device.
2107 # Supported devices:
2108 # ic i2c network interface
2109 # iic i2c standard io
2110 # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
2112 # Supported interfaces:
2113 # pcf Philips PCF8584 ISA-bus controller
2114 # bktr brooktree848 I2C software interface
2117 # iicbb generic I2C bit-banging code (needed by lpbb, bktr)
2119 device iicbus # Bus support, required for ic/iic/iicsmb below.
2124 device iicsmb # smb over i2c bridge
2126 device pcf0 at isa? port 0x320 irq 5
2128 # Intel Core and newer CPUs on-die digital thermal sensor support
2131 # AMD Family 0Fh, 10h and 11h temperature sensors
2135 # ThinkPad Active Protection System accelerometer
2136 device aps0 at isa? port 0x1600
2138 # HW monitoring devices lm(4), it(4) and nsclpcsio.
2139 device lm0 at isa? port 0x290
2140 device it0 at isa? port 0x290
2141 device it1 at isa? port 0xc00
2142 device it2 at isa? port 0xd00
2143 device it3 at isa? port 0x228
2144 device nsclpcsio0 at isa? port 0x2e
2145 device nsclpcsio1 at isa? port 0x4e
2146 device wbsio0 at isa? port 0x2e
2147 device wbsio1 at isa? port 0x4e
2148 device lm#3 at wbsio?
2150 #---------------------------------------------------------------------------
2153 # See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
2155 # i4b passive ISDN cards support contains the following hardware drivers:
2157 # isic - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver
2158 # iwic - Winbond W6692 PCI bus ISDN S/T interface controller
2159 # ifpi - AVM Fritz!Card PCI driver
2160 # ifpi2 - AVM Fritz!Card PCI driver Version 2
2161 # ihfc - Cologne Chip HFC ISA/ISA-PnP chipset driver
2162 # ifpnp - AVM Fritz!Card PnP driver
2163 # itjc - Siemens ISAC / TJNet Tiger300/320 chipset
2165 # i4b active ISDN cards support contains the following hardware drivers:
2167 # iavc - AVM B1 PCI, AVM B1 ISA, AVM T1
2169 # Note that the ``options'' (if given) and ``device'' lines must BOTH
2170 # be uncommented to enable support for a given card !
2172 # In addition to a hardware driver (and probably an option) the mandatory
2173 # ISDN protocol stack devices and the mandatory support device must be
2174 # enabled as well as one or more devices from the optional devices section.
2176 #---------------------------------------------------------------------------
2177 # isic driver (Siemens/Infineon chipsets)
2178 #---------------------------------------------------------------------------
2180 # ISA bus non-PnP Cards:
2181 # ----------------------
2183 # Teles S0/8 or Niccy 1008
2185 device isic0 at isa? iomem 0xd0000 irq 5 flags 1
2187 # Teles S0/16 or Creatix ISDN-S0 or Niccy 1016
2189 #device isic0 at isa? port 0xd80 iomem 0xd0000 irq 5 flags 2
2193 #device isic0 at isa? port 0xd80 irq 5 flags 3
2195 # AVM A1 or AVM Fritz!Card
2197 #device isic0 at isa? port 0x340 irq 5 flags 4
2199 # USRobotics Sportster ISDN TA intern
2201 #device isic0 at isa? port 0x268 irq 5 flags 7
2203 # ITK ix1 Micro ( < V.3, non-PnP version )
2205 #device isic0 at isa? port 0x398 irq 10 flags 18
2209 #device isic0 at isa? port 0x360 irq 10 flags 20
2211 # ISA bus PnP Cards:
2212 # ------------------
2215 options TEL_S0_16_3_P
2218 # Creatix ISDN-S0 P&P
2222 # Dr. Neuhaus Niccy Go@
2226 # Sedlbauer Win Speed
2234 # ELSA QuickStep 1000pro ISA
2238 # ITK ix1 Micro ( V.3, PnP version )
2242 # Siemens I-Surf 2.0
2243 options SIEMENS_ISURF2
2246 # Asuscom ISDNlink 128K ISAC
2247 options ASUSCOM_IPAC
2250 # Eicon Diehl DIVA 2.0 and 2.02
2254 # Compaq Microcom 610
2261 # ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI)
2265 #---------------------------------------------------------------------------
2266 # ifpnp driver for AVM Fritz!Card ISA PnP
2267 #---------------------------------------------------------------------------
2269 # AVM Fritz!Card ISA PnP
2272 #---------------------------------------------------------------------------
2273 # ihfc driver for Cologne Chip ISA chipsets (experimental!)
2274 #---------------------------------------------------------------------------
2276 # Teles 16.3c ISA PnP
2277 # AcerISDN P10 ISA PnP
2278 # TELEINT ISDN SPEED No.1
2281 #---------------------------------------------------------------------------
2282 # ifpi driver for AVM Fritz!Card PCI 1.0 (2.0 unsupported!)
2283 #---------------------------------------------------------------------------
2285 # AVM Fritz!Card PCI 1.0
2288 #---------------------------------------------------------------------------
2289 # ifpi2 driver for AVM Fritz!Card PCI 2.0
2290 #---------------------------------------------------------------------------
2292 # AVM Fritz!Card PCI 2.0
2295 #---------------------------------------------------------------------------
2296 # iwic driver for Winbond W6692 chipset
2297 #---------------------------------------------------------------------------
2299 # ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards)
2302 #---------------------------------------------------------------------------
2303 # itjc driver for Siemens ISAC / TJNet Tiger300/320 chipset
2304 #---------------------------------------------------------------------------
2306 # Traverse Technologies NETjet-S
2310 #---------------------------------------------------------------------------
2311 # iavc driver (AVM active cards, needs i4bcapi driver!)
2312 #---------------------------------------------------------------------------
2314 pseudo-device "i4bcapi" 2
2319 # AVM B1 ISA bus (PnP mode not supported!)
2320 #device iavc0 at isa? port 0x150 irq 5
2323 # ISDN Protocol Stack (mandatory)
2324 # -------------------------------
2326 # Q.921 / layer 2 - i4b passive cards D channel handling
2327 pseudo-device "i4bq921"
2329 # Q.931 / layer 3 - i4b passive cards D channel handling
2330 pseudo-device "i4bq931"
2332 # layer 4 - i4b common passive and active card handling
2338 # userland driver to do ISDN tracing (for passive cards only)
2339 pseudo-device "i4btrc" 4
2341 # userland driver to control the whole thing (mandatory)
2342 pseudo-device "i4bctl"
2344 # userland driver for access to raw B channel
2345 pseudo-device "i4brbch" 4
2347 # userland driver for telephony
2348 pseudo-device "i4btel" 2
2350 # network driver for IP over raw HDLC ISDN
2351 pseudo-device "i4bipr" 4
2352 # enable VJ header compression detection for ipr i/f
2354 # enable logging of the first n IP packets to isdnd (n=32 here)
2357 # network driver for sync PPP over ISDN - requires sppp
2358 pseudo-device "i4bisppp" 4
2363 # Parallel port bus support is provided by the `ppbus' device.
2364 # Multiple devices may be attached to the parallel port, devices
2365 # are automatically probed and attached when found.
2367 # Supported devices:
2368 # vpo Iomega Zip Drive
2369 # Requires SCSI disk support ('scbus' and 'da'); the best
2370 # performance is achieved with ports in EPP 1.9 mode.
2371 # lpt Parallel Printer
2372 # plip Parallel network interface
2373 # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O
2374 # pps Pulse per second Timing Interface
2375 # lpbb Philips official parallel port I2C bit-banging interface
2377 # Supported interfaces:
2378 # ppc ISA-bus parallel port interfaces.
2381 options PPC_PROBE_CHIPSET # Enable chipset specific detection
2382 # (see flags in ppc(4))
2383 options DEBUG_1284 # IEEE1284 signaling protocol debug
2384 options PERIPH_1284 # Makes your computer act as a IEEE1284
2385 # compliant peripheral
2386 options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices
2387 options VP0_DEBUG # ZIP/ZIP+ debug
2388 options LPT_DEBUG # Printer driver debug
2389 options PPC_DEBUG=2 # Parallel chipset level debug
2390 options PLIP_DEBUG # Parallel network IP interface debug
2391 options PCFCLOCK_VERBOSE # Verbose pcfclock driver
2392 options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10)
2394 device ppc0 at isa? irq 7
2404 # Kernel BOOTP support
2406 options BOOTP # Use BOOTP to obtain IP address/hostname
2407 options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
2408 options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
2409 options BOOTP_COMPAT # Workaround for broken bootp daemons.
2410 options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
2413 # Add tie-ins for a hardware watchdog. This only enable the hooks;
2414 # the user must still supply the actual driver.
2419 # Set the number of PV entries per process. Increasing this can
2420 # stop panics related to heavy use of shared memory. However, that can
2421 # (combined with large amounts of physical memory) cause panics at
2422 # boot time due the kernel running out of VM space.
2424 # If you're tweaking this, you might also want to increase the sysctls
2425 # "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target".
2427 # The value below is the one more than the default.
2429 options PMAP_SHPGPERPROC=201
2432 # Change the size of the kernel virtual address space. Due to
2433 # constraints in loader(8) on i386, this must be a multiple of 4.
2434 # 256 = 1 GB of kernel address space. Increasing this also causes
2435 # a reduction of the address space in user processes. 512 splits
2436 # the 4GB cpu address space in half (2GB user, 2GB kernel).
2438 options KVA_PAGES=260
2441 # Disable swapping. This option removes all code which actually performs
2442 # swapping, so it's not possible to turn it back on at run-time.
2444 # This is sometimes usable for systems which don't have any swap space
2445 # (see also sysctls "vm.defer_swapspace_pageouts" and
2446 # "vm.disable_swapspace_pageouts")
2448 #options NO_SWAPPING
2450 # Set the size of the buffer cache KVM reservation, in buffers. This is
2451 # scaled by approximately 16384 bytes. The system will auto-size the buffer
2452 # cache if this option is not specified.
2456 # Set the size of the mbuf KVM reservation, in clusters. This is scaled
2457 # by approximately 2048 bytes. The system will auto-size the mbuf area
2458 # to (512 + maxusers*16) if this option is not specified.
2459 # maxusers is in turn computed at boot time depending on available memory
2460 # or set to the value specified by "options MAXUSERS=x" (x=0 means
2462 # So, to take advantage of autoscaling, you have to remove both
2463 # NMBCLUSTERS and MAXUSERS (and NMBUFS) from your kernel config.
2465 options NMBCLUSTERS=1024
2467 # Set the number of mbufs available in the system. Each mbuf
2468 # consumes 256 bytes. The system will autosize this (to 4 times
2469 # the number of NMBCLUSTERS, depending on other constraints)
2470 # if this option is not specified.
2474 # Tune the buffer cache maximum KVA reservation, in bytes. The maximum is
2475 # usually capped at 200 MB, effecting machines with > 1GB of ram. Note
2476 # that the buffer cache only really governs write buffering and disk block
2477 # translations. The VM page cache is our primary disk cache and is not
2478 # effected by the size of the buffer cache.
2480 options VM_BCACHE_SIZE_MAX="(100*1024*1024)"
2482 # Tune the swap zone KVA reservation, in bytes. The default is typically
2483 # 70 MB, giving the system the ability to manage a maximum of 28GB worth
2484 # of swapped out data.
2486 options VM_SWZONE_SIZE_MAX="(50*1024*1024)"
2489 # Enable extra debugging code for locks. This stores the filename and
2490 # line of whatever acquired the lock in the lock itself, and change a
2491 # number of function calls to pass around the relevant data. This is
2492 # not at all useful unless you are debugging lock code. Also note
2493 # that it is likely to break e.g. fstat(1) unless you recompile your
2494 # userland with -DDEBUG_LOCKS as well.
2498 # Set the amount of time (in seconds) the system will wait before
2499 # rebooting automatically when a kernel panic occurs. If set to (-1),
2500 # the system will wait indefinitely until a key is pressed on the
2502 options PANIC_REBOOT_WAIT_TIME=16
2504 # Attempt to bypass the buffer cache and put data directly into the
2505 # userland buffer for read operation when O_DIRECT flag is set on the
2506 # file. Both offset and length of the read operation must be
2507 # multiples of the physical media sector size.
2511 # Specify a lower limit for the number of swap I/O buffers. They are
2512 # (among other things) used when bypassing the buffer cache due to
2513 # DIRECTIO kernel option enabled and O_DIRECT flag set on file.
2515 #options NSWBUF_MIN=120
2517 # The 'asr' driver provides support for current DPT/Adaptec SCSI RAID
2518 # controllers (SmartRAID V and VI and later).
2519 # These controllers require the CAM infrastructure.
2523 # The 'dpt' driver provides support for DPT controllers (http://www.dpt.com/).
2524 # These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
2525 # The DPT controllers are commonly re-licensed under other brand-names -
2526 # some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
2527 # Compaq are actually DPT controllers.
2529 # See src/sys/dev/raid/dpt for debugging and other subtle options.
2530 # DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
2531 # instruments are enabled. The tools in
2532 # /usr/sbin/dpt_* assume these to be enabled.
2533 # DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
2534 # If you ant the driver to handle timeouts, enable
2535 # this option. If your system is very busy, this
2536 # option will create more trouble than solve.
2537 # DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
2538 # wait when timing out with the above option.
2539 # DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/raid/dpt.h
2540 # DPT_LOST_IRQ When enabled, will try, once per second, to catch
2541 # any interrupt that got lost. Seems to help in some
2542 # DPT-firmware/Motherboard combinations. Minimal
2543 # cost, great benefit.
2544 # DPT_RESET_HBA Make "reset" actually reset the controller
2545 # instead of fudging it. Only enable this if you
2546 # are 100% certain you need it.
2551 #!CAM# options DPT_MEASURE_PERFORMANCE
2552 #!CAM# options DPT_HANDLE_TIMEOUTS
2553 options DPT_TIMEOUT_FACTOR=4
2554 options DPT_LOST_IRQ
2555 options DPT_RESET_HBA
2558 # Compaq "CISS" RAID controllers (SmartRAID 5* series)
2559 # These controllers have a SCSI-like interface, and require the
2560 # CAM infrastructure.
2565 # Intel Integrated RAID controllers.
2566 # This driver is supported and maintained by
2567 # "Leubner, Achim" <Achim_Leubner@adaptec.com>.
2572 # Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
2573 # firmware. These controllers have a SCSI-like interface, and require
2574 # the CAM infrastructure.
2585 # General USB code (mandatory for USB)
2590 # Generic USB device driver
2592 # Human Interface Device (anything with buttons and dials)
2598 # USB Iomega Zip 100 Drive (Requires scbus and da)
2604 # USB Rio (MP3 Player)
2624 # ADMtek USB ethernet. Supports the LinkSys USB100TX,
2625 # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
2626 # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
2630 # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the
2631 # LinkSys USB200M and various other adapters.
2634 # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
2635 # and Netmate II, and the Belkin F5U111.
2638 # Kawasaki LSI ethernet. Supports the LinkSys USB10T,
2639 # Entrega USB-NET-E45, Peracom Ethernet Adapter, the
2640 # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
2641 # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
2642 # and 2104USB, and the Corega USB-T.
2645 # RealTek 8150 based USB ethernet device:
2647 # GREEN HOUSE GH-USB100B
2648 # Billionton ThumbLAN USBKR2-100B
2651 # USB wireless NICs, requires wlan_amrr
2653 # Ralink Technology RT2501USB/RT2601USB
2656 # Ralink Technology RT2500USB
2659 # debugging options for the USB subsystem
2664 options UKBD_DFLT_KEYMAP # specify the built-in keymap
2665 makeoptions UKBD_DFLT_KEYMAP=it.iso
2668 device firewire # Firewire bus code
2669 device sbp # SCSI over Firewire (Requires scbus and da)
2670 device fwe # Ethernet over Firewire (non-standard!)
2672 # dcons support (Dumb Console Device)
2673 device dcons # dumb console driver
2674 device dcons_crom # FireWire attachment
2675 options DCONS_BUF_SIZE=16384 # buffer size
2676 options DCONS_POLL_HZ=100 # polling rate
2677 options DCONS_FORCE_CONSOLE=1 # force to be the primary console
2678 options DCONS_FORCE_GDB=1 # force to be the gdb device
2680 #####################################################################
2683 # This is a port of the openbsd crypto framework. Include this when
2684 # configuring IPsec and when you have a h/w crypto device to accelerate
2685 # user applications that link to openssl.
2687 # Drivers are ports from openbsd with some simple enhancements that have
2688 # been fed back to openbsd (and hopefully will be included).
2690 pseudo-device crypto # core crypto support
2691 pseudo-device cryptodev # /dev/crypto for access to h/w
2693 device rndtest # FIPS 140-2 entropy tester
2695 device hifn # Hifn 7951, 7781, etc.
2696 options HIFN_DEBUG # enable debugging support: hw.hifn.debug
2697 #options HIFN_NO_RNG # for devices without RNG
2698 options HIFN_RNDTEST # enable rndtest support
2700 device ubsec # Broadcom 5501, 5601, 58xx
2701 options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug
2702 #options UBSEC_NO_RNG # for devices without RNG
2703 options UBSEC_RNDTEST # enable rndtest support
2705 device aesni # hardware crypto/RNG for AES-NI
2706 device glxsb # Geode LX Security Block
2707 device padlock # hardware crypto/RNG for VIA C3/C7/Eden
2710 # ACPI support using the Intel ACPI Component Architecture reference
2713 # ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer
2714 # kernel environment variables to select initial debugging levels for the
2715 # Intel ACPICA code.
2717 # Note that building ACPI into the kernel is deprecated; the module is
2718 # normally loaded automatically by the loader.
2723 # ACPI Asus Extras (LCD backlight/brightness, video output, etc.)
2726 # ACPI Fujitsu Extras (Buttons)
2729 # ACPI extras driver for HP laptops
2732 # ACPI Panasonic Extras (LCD backlight/brightness, video output, etc.)
2733 device acpi_panasonic
2735 # ACPI Sony extra (LCD brightness)
2738 # ACPI extras driver for ThinkPad laptops
2739 device acpi_thinkpad
2741 # ACPI Toshiba Extras (LCD backlight/brightness, video output, etc.)
2744 # ACPI Video Extensions (LCD backlight/brightness, video output, etc.)
2747 device aibs # ASUSTeK AI Booster (ACPI ASOC ATK0110)
2748 device pmtimer # adjust the system clock after resume
2751 # drm: General DRM code
2752 # i915drm: Intel i830, i845, i915, i945, i965, G33/35
2753 # mach64drm: ATI Mach64 cards - Rage and 3D Rage series
2754 # mgadrm: AGP Matrox G200, G400, G450, G550
2755 # r128drm: ATI Rage 128 cards
2756 # radeondrm: ATI Radeon cards
2757 # savagedrm: Savage cards
2759 # tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee
2761 # DRM_DEBUG: include debug printfs, very slow
2763 # DRM requires AGP in the kernel.
2781 device cmx # Omnikey CardMan 4040 smartcard reader
2782 device gpio # Enable support for the gpio framework
2785 # Embedded system options:
2787 # An embedded system might want to run something other than init.
2788 options INIT_PATH="/sbin/init:/sbin/oinit"
2791 options BUS_DEBUG # enable newbus debugging
2792 options NPX_DEBUG # enable npx debugging (FPU/math emu)
2794 # Record the program counter of the code interrupted by the statistics
2795 # clock interrupt. Use pctrack(8) to dump this information.
2796 options DEBUG_PCTRACK
2798 # More undocumented options for linting.
2799 # Note that documenting these are not considered an affront.
2801 #options ACPI_NO_SEMAPHORES
2802 options AHC_DUMP_EEPROM
2803 #options BKTR_ALLOC_PAGES=xxx
2804 options CAM_DEBUG_DELAY
2805 options CLUSTERDEBUG
2806 options COMPAT_LINUX
2807 options COMPAT_SUNOS
2809 options DEBUG_CRIT_SECTIONS
2810 options DEBUG_INTERRUPTS
2811 #options DISABLE_PSE
2813 options BCE_NVRAM_WRITE_SUPPORT
2814 options EMX_RSS_DEBUG
2815 options JME_RSS_DEBUG
2816 #options ED_NO_MIIBUS
2817 options ENABLE_ALART
2819 options FB_INSTALL_CDEV
2820 options FE_8BIT_SUPPORT
2821 options I4B_SMP_WORKAROUND
2822 options I586_PMC_GUPROF=0x70000
2823 #options IEEE80211_DEBUG_REFCNT
2824 options IEEE80211_SUPPORT_SUPERG
2825 options KBDIO_DEBUG=10
2826 options KBD_MAXRETRY=4
2827 options KBD_MAXWAIT=6
2828 options KBD_RESETDELAY=201
2829 options KERN_TIMESTAMP
2834 #options MAXFILES=xxx
2836 options METEOR_TEST_VIDEO
2837 options NETATALKDEBUG
2840 options SCSI_NCR_DEBUG
2841 options SCSI_NCR_MAX_SYNC=10000
2842 options SCSI_NCR_MAX_WIDE=1
2843 options SCSI_NCR_MYADDR=7
2844 options SHOW_BUSYBUFS # List buffers that prevent root unmount
2845 options SIMPLELOCK_DEBUG
2847 options SLIP_IFF_OPTS
2848 options SOCKBUF_DEBUG
2849 options TDMA_BINTVAL_DEFAULT=5
2850 options TDMA_SLOTCNT_DEFAULT=2
2851 options TDMA_SLOTLEN_DEFAULT=10*1000
2852 options TDMA_TXRATE_11A_DEFAULT=2*24
2853 options TDMA_TXRATE_11B_DEFAULT=2*11
2854 options TDMA_TXRATE_11G_DEFAULT=2*24
2855 options TDMA_TXRATE_11NA_DEFAULT="(4|IEEE80211_RATE_MCS)"
2856 options TDMA_TXRATE_11NG_DEFAULT="(4|IEEE80211_RATE_MCS)"
2857 options TDMA_TXRATE_HALF_DEFAULT=2*12
2858 options TDMA_TXRATE_QUARTER_DEFAULT=2*6
2859 options TDMA_TXRATE_TURBO_DEFAULT=2*24
2860 options TIMER_FREQ="((14318182+6)/12)"
2861 options VFS_BIO_DEBUG
2866 #options KTR_ETHERNET
2867 #options KTR_GIANT_CONTENTION
2872 #options KTR_IF_START
2875 #options KTR_KERNENTRY
2877 #options KTR_POLLING
2878 #options KTR_SERIALIZER
2879 #options KTR_SPIN_CONTENTION
2880 #options KTR_TESTLOG
2882 #options KTR_USB_MEMORY
2884 options KTR_ENTRIES=1024
2885 options KTR_VERBOSE=1
2888 options ALTQ #alternate queueing
2889 options ALTQ_CBQ #class based queueing
2890 options ALTQ_RED #random early detection
2891 options ALTQ_RIO #triple red for diffserv (needs RED)
2892 options ALTQ_HFSC #hierarchical fair service curve
2893 options ALTQ_PRIQ #priority queue
2894 options ALTQ_FAIRQ #fair queue
2895 #options ALTQ_NOPCC #don't use processor cycle counter
2896 options ALTQ_DEBUG #for debugging
2897 # you might want to set kernel timer to 1kHz if you use CBQ,
2898 # especially with 100baseT
2904 options SCTP_USE_ADLER32
2905 options SCTP_HIGH_SPEED
2906 options SCTP_STAT_LOGGING
2907 options SCTP_CWND_LOGGING
2908 options SCTP_BLK_LOGGING
2909 options SCTP_STR_LOGGING
2910 options SCTP_FR_LOGGING
2911 options SCTP_MAP_LOGGING
2916 # Receive Side Scaling
2921 options WATCHDOG_ENABLE # Enable watchdog support framework
2922 options WDOG_DISABLE_ON_PANIC # Automatically disable watchdogs on panic
2925 options ERROR_LED_ON_PANIC # If an error led is present, light it up on panic