1 # $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
2 # $DragonFly: src/etc/defaults/make.conf,v 1.15 2005/09/06 18:55:18 dillon Exp $
4 # NOTE: Please would any committer updating this file also update the
5 # make.conf(5) manual page, if necessary, which is located in
6 # src/share/man/man5/make.conf.5.
8 # This file, if present, will be read by make (see /usr/share/mk/sys.mk).
9 # It allows you to override macro definitions to make without changing
10 # your source tree, or anything the source tree installs.
12 # This file must be in valid Makefile syntax.
14 # You have to find the things you can put here in the Makefiles and
15 # documentation of the source tree.
17 # The CPUTYPE variable controls which processor should be targeted for
18 # generated code. This controls processor-specific optimizations in
19 # certain code (currently only OpenSSL) as well as modifying the value
20 # of CFLAGS to contain the appropriate optimization directive to gcc.
21 # The automatic setting of CFLAGS may be overridden using the
22 # NO_CPU_CFLAGS variable below.
23 # Currently the following CPU types are recognized:
24 # Intel x86 architecture:
25 # (AMD CPUs) k7 k6-2 k6 k5
26 # (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386
28 # If you experience any problems after setting this flag, please unset
29 # it again before submitting a bug report or attempting to modify code.
30 # It may be that certain types of software will become unstable after being
31 # compiled with processor-specific (or higher - see below) optimization flags.
32 # If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
35 #NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
36 #NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
38 # The CCVER variable controls which GCC-version to use by default. It
39 # should be set using ?= so as not to interfere with CCVER overrides from
40 # userland or the buildworld. We currently recommend that an override NOT
41 # be set in /etc/make.conf and that gcc 3.4 not yet be used to build the boot
42 # blocks, boot loader, or the kernel.
44 #CCVER?=gcc34 # (use GCC 3.4, default)
45 #CCVER?=gcc40 # (use GCC 4.0, experimental, must define WANT_GCC40)
47 # Build gcc40 with world. This won't make gcc40 the default compiler
50 # CFLAGS controls the compiler settings used when compiling C code.
51 # Note that optimization settings above -O (-O2, ...) are not recommended
52 # or supported for compiling the world or the kernel - please revert any
53 # nonstandard optimization settings to "-O" before submitting bug reports
58 # CXXFLAGS controls the compiler settings used when compiling C++ code.
59 # Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
60 # to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
61 # alone will remove the often needed contents of CFLAGS from CXXFLAGS.
63 #CXXFLAGS+= -fmemoize-lookups -fsave-memoized
65 # BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
66 # for use in developing FreeBSD and testing changes. They can be used by
67 # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
68 # included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
70 BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
71 -Wcast-qual -Wchar-subscripts -Winline \
72 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
73 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
75 # WARNS_WERROR causes -Werror to be added when WARNS is in effect.
78 # To compile just the kernel with special optimizations, you should use
79 # this instead of CFLAGS (which is not applicable to kernel builds anyway).
80 # There is very little to gain by using higher optimization levels, and doing
81 # so can cause problems.
85 # Strip the file before installing. Setting this to nothing will keep
86 # the debugging symbols in the installed files.
89 # Compare before install
92 # To build ppp with normal permissions
95 # To enable installing ssh(1) with the setuid bit turned on
96 #ENABLE_SUID_SSH= true
98 # To avoid building various parts of the base system:
99 #NO_BIND= true # do not build BIND
100 #NO_CRYPT= true # do not build crypto code
101 #NO_CVS= true # do not build CVS
102 #NO_FORTRAN= true # do not build g77 and related libraries
103 #NO_GAMES= true # do not enter the games subdirectory
104 #NO_I4B= true # do not build isdn4bsd package
105 #NO_IPFILTER= true # do not build IP Filter package
106 #NO_LIBC_R= true # do not build libc_r (re-entrant version of libc)
107 #NO_LPR= true # do not build lpr and related programs
108 #NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
109 #NO_MODULES= true # do not build modules with the kernel
110 #NO_OBJC= true # do not build Objective C support
111 #NO_OPENSSH= true # do not build OpenSSH
112 #NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
113 #NO_PKGTOOLS= true # do not build included package tools (for pkgsrc)
114 #NO_SENDMAIL= true # do not build sendmail and related programs
115 #NO_SHARE= true # do not enter the share subdirectory
116 #NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs
117 #NO_X= true # do not compile in XWindows support (e.g. doscmd)
118 #NOINFO= true # do not make or install info files
119 #NOINFOCOMPRESS=true # do not compress info files
120 #NOMAN= true # do not build manual pages
121 #NOMANCOMPRESS= true # do not compress man pages
122 #NOPROFILE= true # Avoid compiling profiled libraries
123 #NOSHARE= true # do not go into the share subdir
125 # To build sys/modules when building the world (our old way of doing things)
126 #MODULES_WITH_WORLD=true # do not build modules when building kernel
128 # The list of modules to build instead of all of them.
129 #MODULES_OVERRIDE= emulation/linux net/ipfw
131 # To avoid running MAKEDEV all on /dev during install:
134 # The following controls building optional IDEA code in libcrypto and
135 # certain ports. Patents are involved - you must not use this unless
136 # you either have a license or fall within patent 'fair use'
139 # *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
141 # IDEA is patented in the USA and many European countries - thought to
142 # be OK to use for any non-commercial use. This is optional.
143 #WANT_IDEA= YES # IDEA (128 bit symmetric encryption)
145 # Default format for system documentation, depends on your printer.
146 # Set this to "ascii" for simple printers or screen
150 # How long to wait for a console keypress before booting the default kernel.
151 # This value is approximately in milliseconds. Keypresses are accepted by the
152 # BIOS before booting from disk, making it possible to give custom boot
153 # parameters even when this is set to 0.
158 # By default, the system will always use the keyboard/video card as system
159 # console. However, the boot blocks may be dynamically configured to use a
160 # serial port in addition to or instead of the keyboard/video console.
162 # By default we use COM1 as our serial console port *if* we're going to use
163 # a serial port as our console at all. Alter as necessary.
165 # COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
167 #BOOT_COMCONSOLE_PORT= 0x3F8
169 # The default serial console speed is 9600. Set the speed to a larger value
170 # for better interactive response.
172 #BOOT_COMCONSOLE_SPEED= 115200
174 # By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
175 # this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
176 # via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
177 # still mount the server's '/' (i.e. rather than load the server's kernel).
179 #LOADER_TFTP_SUPPORT= YES
181 # If you're behind a firewall and need FTP or HTTP proxy services for
182 # ports collection fetching to work, the following examples give the
183 # necessary syntax. See the fetch(3) man page for details.
185 #FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21
186 #FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80
188 # If you want Kerberos 5, define this.
191 # If you want to use the k5su utility, define this to have it installed
193 #ENABLE_SUID_K5SU= yes
195 # CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
196 # file(s) you use on your site (see /usr/share/examples/cvsup/README for more
197 # information on CVSup and these files). To use, do "make update" in /usr/src.
200 #SUP= /usr/local/bin/cvsup
202 #SUPHOST= cvsup.dragonflybsd.org
203 #SUPFILE= /usr/share/examples/cvsup/DragonFly-src-supfile
204 #DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
206 # top(1) uses a hash table for the user names. The size of this hash
207 # can be tuned to match the number of local users. The table size should
208 # be a prime number approximately twice as large as the number of lines in
209 # /etc/passwd. The default number is 20011.
215 # The list of languages and encodings to build and install
217 #DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
221 # The following sets the default m4 configuration file to use at
222 # install time. Use with caution as a make install will overwrite
223 # any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
224 # deprecated. The value should be a fully qualified path name.
225 # Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
226 # create /etc/mail/sendmail.cf before installworld installs an
227 # updated sendmail binary.
229 #SENDMAIL_MC=/etc/mail/myconfig.mc
231 # The following sets the default m4 configuration file for mail
232 # submission to use at install time. Use with caution as a make
233 # install will overwrite any existing /etc/mail/submit.cf. The
234 # value should be a fully qualified path name.
235 # Avoid using a value of /etc/mail/submit.mc as a buildworld will
236 # create /etc/mail/submit.cf before installworld installs an
237 # updated sendmail binary.
239 #SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
241 # If you need to build additional .cf files during a make buildworld,
242 # include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
243 # Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
244 # create /etc/mail/sendmail.cf before installworld installs an
245 # updated sendmail binary.
247 #SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
249 # Setting the following variable modifies the flags passed to m4 when
250 # building a .cf file from a .mc file. It can be used to enable
251 # features disabled by default.
255 # Setting the following variables modifies the build environment for
256 # sendmail and its related utilities. For example, SASL support can be
257 # added with settings such as:
260 # SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
261 # SENDMAIL_LDFLAGS=-L/usr/local/lib
262 # SENDMAIL_LDADD=-lsasl
265 # SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
266 # SENDMAIL_LDFLAGS=-L/usr/local/lib
267 # SENDMAIL_LDADD=-lsasl2
269 # Note: If you are using Cyrus SASL with other applications which require
270 # access to the sasldb file, you should add the following to your
273 # define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
280 # Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
281 # set-user-ID root binary instead of a set-group-ID smmsp binary and will
282 # prevent the installation of /etc/mail/submit.cf.
283 # This is a deprecated mode of operation. See etc/mail/README for more
286 #SENDMAIL_SET_USER_ID=
288 # The permissions to use on alias and map databases generated using
289 # /etc/mail/Makefile. Defaults to 0640.