Add missing splx(s) in sk_detach.
[dragonfly.git] / sys / dev / netif / sk / if_sk.c
1 /*      $OpenBSD: if_sk.c,v 1.33 2003/08/12 05:23:06 nate Exp $ */
2
3 /*
4  * Copyright (c) 1997, 1998, 1999, 2000
5  *      Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. All advertising materials mentioning features or use of this software
16  *    must display the following acknowledgement:
17  *      This product includes software developed by Bill Paul.
18  * 4. Neither the name of the author nor the names of any co-contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32  * THE POSSIBILITY OF SUCH DAMAGE.
33  *
34  * $FreeBSD: src/sys/pci/if_sk.c,v 1.19.2.9 2003/03/05 18:42:34 njl Exp $
35  * $DragonFly: src/sys/dev/netif/sk/if_sk.c,v 1.29 2005/05/26 22:17:12 joerg Exp $
36  */
37
38 /*
39  * Copyright (c) 2003 Nathan L. Binkert <binkertn@umich.edu>
40  *
41  * Permission to use, copy, modify, and distribute this software for any
42  * purpose with or without fee is hereby granted, provided that the above
43  * copyright notice and this permission notice appear in all copies.
44  *
45  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
46  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
47  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
48  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
49  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
50  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
51  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
52  */
53
54 /*
55  * SysKonnect SK-NET gigabit ethernet driver for FreeBSD. Supports
56  * the SK-984x series adapters, both single port and dual port.
57  * References:
58  *      The XaQti XMAC II datasheet,
59  *  http://www.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf
60  *      The SysKonnect GEnesis manual, http://www.syskonnect.com
61  *
62  * Note: XaQti has been aquired by Vitesse, and Vitesse does not have the
63  * XMAC II datasheet online. I have put my copy at people.freebsd.org as a
64  * convenience to others until Vitesse corrects this problem:
65  *
66  * http://people.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf
67  *
68  * Written by Bill Paul <wpaul@ee.columbia.edu>
69  * Department of Electrical Engineering
70  * Columbia University, New York City
71  */
72
73 /*
74  * The SysKonnect gigabit ethernet adapters consist of two main
75  * components: the SysKonnect GEnesis controller chip and the XaQti Corp.
76  * XMAC II gigabit ethernet MAC. The XMAC provides all of the MAC
77  * components and a PHY while the GEnesis controller provides a PCI
78  * interface with DMA support. Each card may have between 512K and
79  * 2MB of SRAM on board depending on the configuration.
80  *
81  * The SysKonnect GEnesis controller can have either one or two XMAC
82  * chips connected to it, allowing single or dual port NIC configurations.
83  * SysKonnect has the distinction of being the only vendor on the market
84  * with a dual port gigabit ethernet NIC. The GEnesis provides dual FIFOs,
85  * dual DMA queues, packet/MAC/transmit arbiters and direct access to the
86  * XMAC registers. This driver takes advantage of these features to allow
87  * both XMACs to operate as independent interfaces.
88  */
89  
90 #include <sys/param.h>
91 #include <sys/systm.h>
92 #include <sys/sockio.h>
93 #include <sys/mbuf.h>
94 #include <sys/malloc.h>
95 #include <sys/kernel.h>
96 #include <sys/socket.h>
97 #include <sys/queue.h>
98
99 #include <net/if.h>
100 #include <net/ifq_var.h>
101 #include <net/if_arp.h>
102 #include <net/ethernet.h>
103 #include <net/if_dl.h>
104 #include <net/if_media.h>
105
106 #include <net/bpf.h>
107
108 #include <vm/vm.h>              /* for vtophys */
109 #include <vm/pmap.h>            /* for vtophys */
110 #include <machine/clock.h>      /* for DELAY */
111 #include <machine/bus_pio.h>
112 #include <machine/bus_memio.h>
113 #include <machine/bus.h>
114 #include <machine/resource.h>
115 #include <sys/bus.h>
116 #include <sys/rman.h>
117
118 #include "../mii_layer/mii.h"
119 #include "../mii_layer/miivar.h"
120 #include "../mii_layer/brgphyreg.h"
121
122 #include <bus/pci/pcireg.h>
123 #include <bus/pci/pcivar.h>
124
125 #if 0
126 #define SK_USEIOSPACE
127 #endif
128
129 #include "if_skreg.h"
130 #include "xmaciireg.h"
131 #include "yukonreg.h"
132
133 /* "controller miibus0" required.  See GENERIC if you get errors here. */
134 #include "miibus_if.h"
135
136 static struct sk_type sk_devs[] = {
137         {
138                 VENDORID_SK,
139                 DEVICEID_SK_V1,
140                 "SysKonnect Gigabit Ethernet (V1.0)"
141         },
142         {
143                 VENDORID_SK,
144                 DEVICEID_SK_V2,
145                 "SysKonnect Gigabit Ethernet (V2.0)"
146         },
147         {
148                 VENDORID_MARVELL,
149                 DEVICEID_SK_V2,
150                 "Marvell Gigabit Ethernet"
151         },
152         {
153                 VENDORID_3COM,
154                 DEVICEID_3COM_3C940,
155                 "3Com 3C940 Gigabit Ethernet"
156         },
157         {
158                 VENDORID_LINKSYS,
159                 DEVICEID_LINKSYS_EG1032,
160                 "Linksys EG1032 Gigabit Ethernet"
161         },
162         {
163                 VENDORID_DLINK,
164                 DEVICEID_DLINK_DGE530T,
165                 "D-Link DGE-530T Gigabit Ethernet"
166         },
167         { 0, 0, NULL }
168 };
169
170 static int skc_probe            (device_t);
171 static int skc_attach           (device_t);
172 static int skc_detach           (device_t);
173 static void skc_shutdown        (device_t);
174 static int sk_probe             (device_t);
175 static int sk_attach            (device_t);
176 static int sk_detach            (device_t);
177 static void sk_tick             (void *);
178 static void sk_intr             (void *);
179 static void sk_intr_bcom        (struct sk_if_softc *);
180 static void sk_intr_xmac        (struct sk_if_softc *);
181 static void sk_intr_yukon       (struct sk_if_softc *);
182 static void sk_rxeof            (struct sk_if_softc *);
183 static void sk_txeof            (struct sk_if_softc *);
184 static int sk_encap             (struct sk_if_softc *, struct mbuf *,
185                                         u_int32_t *);
186 static void sk_start            (struct ifnet *);
187 static int sk_ioctl             (struct ifnet *, u_long, caddr_t,
188                                         struct ucred *);
189 static void sk_init             (void *);
190 static void sk_init_xmac        (struct sk_if_softc *);
191 static void sk_init_yukon       (struct sk_if_softc *);
192 static void sk_stop             (struct sk_if_softc *);
193 static void sk_watchdog         (struct ifnet *);
194 static int sk_ifmedia_upd       (struct ifnet *);
195 static void sk_ifmedia_sts      (struct ifnet *, struct ifmediareq *);
196 static void sk_reset            (struct sk_softc *);
197 static int sk_newbuf            (struct sk_if_softc *,
198                                         struct sk_chain *, struct mbuf *);
199 static int sk_alloc_jumbo_mem   (struct sk_if_softc *);
200 static void *sk_jalloc          (struct sk_if_softc *);
201 static void sk_jfree            (caddr_t, u_int);
202 static void sk_jref             (caddr_t, u_int);
203 static int sk_init_rx_ring      (struct sk_if_softc *);
204 static void sk_init_tx_ring     (struct sk_if_softc *);
205 static u_int32_t sk_win_read_4  (struct sk_softc *, int);
206 static u_int16_t sk_win_read_2  (struct sk_softc *, int);
207 static u_int8_t sk_win_read_1   (struct sk_softc *, int);
208 static void sk_win_write_4      (struct sk_softc *, int, u_int32_t);
209 static void sk_win_write_2      (struct sk_softc *, int, u_int32_t);
210 static void sk_win_write_1      (struct sk_softc *, int, u_int32_t);
211 static u_int8_t sk_vpd_readbyte (struct sk_softc *, int);
212 static void sk_vpd_read_res     (struct sk_softc *,
213                                         struct vpd_res *, int);
214 static void sk_vpd_read         (struct sk_softc *);
215
216 static int sk_miibus_readreg    (device_t, int, int);
217 static int sk_miibus_writereg   (device_t, int, int, int);
218 static void sk_miibus_statchg   (device_t);
219
220 static int sk_xmac_miibus_readreg     (struct sk_if_softc *, int, int);
221 static int sk_xmac_miibus_writereg    (struct sk_if_softc *, int, int, int);
222 static void sk_xmac_miibus_statchg    (struct sk_if_softc *);
223
224 static int sk_marv_miibus_readreg     (struct sk_if_softc *, int, int);
225 static int sk_marv_miibus_writereg    (struct sk_if_softc *, int, int, int);
226 static void sk_marv_miibus_statchg    (struct sk_if_softc *);
227
228 static u_int32_t xmac_calchash  (caddr_t);
229 static u_int32_t gmac_calchash  (caddr_t);
230 static void sk_setfilt          (struct sk_if_softc *, caddr_t, int);
231 static void sk_setmulti         (struct sk_if_softc *);
232 static void sk_setpromisc       (struct sk_if_softc *);
233
234 #ifdef SK_USEIOSPACE
235 #define SK_RES          SYS_RES_IOPORT
236 #define SK_RID          SK_PCI_LOIO
237 #else
238 #define SK_RES          SYS_RES_MEMORY
239 #define SK_RID          SK_PCI_LOMEM
240 #endif
241
242 /*
243  * Note that we have newbus methods for both the GEnesis controller
244  * itself and the XMAC(s). The XMACs are children of the GEnesis, and
245  * the miibus code is a child of the XMACs. We need to do it this way
246  * so that the miibus drivers can access the PHY registers on the
247  * right PHY. It's not quite what I had in mind, but it's the only
248  * design that achieves the desired effect.
249  */
250 static device_method_t skc_methods[] = {
251         /* Device interface */
252         DEVMETHOD(device_probe,         skc_probe),
253         DEVMETHOD(device_attach,        skc_attach),
254         DEVMETHOD(device_detach,        skc_detach),
255         DEVMETHOD(device_shutdown,      skc_shutdown),
256
257         /* bus interface */
258         DEVMETHOD(bus_print_child,      bus_generic_print_child),
259         DEVMETHOD(bus_driver_added,     bus_generic_driver_added),
260
261         { 0, 0 }
262 };
263
264 static driver_t skc_driver = {
265         "skc",
266         skc_methods,
267         sizeof(struct sk_softc)
268 };
269
270 static devclass_t skc_devclass;
271
272 static device_method_t sk_methods[] = {
273         /* Device interface */
274         DEVMETHOD(device_probe,         sk_probe),
275         DEVMETHOD(device_attach,        sk_attach),
276         DEVMETHOD(device_detach,        sk_detach),
277         DEVMETHOD(device_shutdown,      bus_generic_shutdown),
278
279         /* bus interface */
280         DEVMETHOD(bus_print_child,      bus_generic_print_child),
281         DEVMETHOD(bus_driver_added,     bus_generic_driver_added),
282
283         /* MII interface */
284         DEVMETHOD(miibus_readreg,       sk_miibus_readreg),
285         DEVMETHOD(miibus_writereg,      sk_miibus_writereg),
286         DEVMETHOD(miibus_statchg,       sk_miibus_statchg),
287
288         { 0, 0 }
289 };
290
291 static driver_t sk_driver = {
292         "sk",
293         sk_methods,
294         sizeof(struct sk_if_softc)
295 };
296
297 static devclass_t sk_devclass;
298
299 DECLARE_DUMMY_MODULE(if_sk);
300 DRIVER_MODULE(if_sk, pci, skc_driver, skc_devclass, 0, 0);
301 DRIVER_MODULE(if_sk, skc, sk_driver, sk_devclass, 0, 0);
302 DRIVER_MODULE(miibus, sk, miibus_driver, miibus_devclass, 0, 0);
303
304 #define SK_SETBIT(sc, reg, x)           \
305         CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | x)
306
307 #define SK_CLRBIT(sc, reg, x)           \
308         CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~x)
309
310 #define SK_WIN_SETBIT_4(sc, reg, x)     \
311         sk_win_write_4(sc, reg, sk_win_read_4(sc, reg) | x)
312
313 #define SK_WIN_CLRBIT_4(sc, reg, x)     \
314         sk_win_write_4(sc, reg, sk_win_read_4(sc, reg) & ~x)
315
316 #define SK_WIN_SETBIT_2(sc, reg, x)     \
317         sk_win_write_2(sc, reg, sk_win_read_2(sc, reg) | x)
318
319 #define SK_WIN_CLRBIT_2(sc, reg, x)     \
320         sk_win_write_2(sc, reg, sk_win_read_2(sc, reg) & ~x)
321
322 static u_int32_t sk_win_read_4(sc, reg)
323         struct sk_softc         *sc;
324         int                     reg;
325 {
326 #ifdef SK_USEIOSPACE
327         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
328         return(CSR_READ_4(sc, SK_WIN_BASE + SK_REG(reg)));
329 #else
330         return(CSR_READ_4(sc, reg));
331 #endif
332 }
333
334 static u_int16_t sk_win_read_2(sc, reg)
335         struct sk_softc         *sc;
336         int                     reg;
337 {
338 #ifdef SK_USEIOSPACE
339         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
340         return(CSR_READ_2(sc, SK_WIN_BASE + SK_REG(reg)));
341 #else
342         return(CSR_READ_2(sc, reg));
343 #endif
344 }
345
346 static u_int8_t sk_win_read_1(sc, reg)
347         struct sk_softc         *sc;
348         int                     reg;
349 {
350 #ifdef SK_USEIOSPACE
351         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
352         return(CSR_READ_1(sc, SK_WIN_BASE + SK_REG(reg)));
353 #else
354         return(CSR_READ_1(sc, reg));
355 #endif
356 }
357
358 static void sk_win_write_4(sc, reg, val)
359         struct sk_softc         *sc;
360         int                     reg;
361         u_int32_t               val;
362 {
363 #ifdef SK_USEIOSPACE
364         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
365         CSR_WRITE_4(sc, SK_WIN_BASE + SK_REG(reg), val);
366 #else
367         CSR_WRITE_4(sc, reg, val);
368 #endif
369         return;
370 }
371
372 static void sk_win_write_2(sc, reg, val)
373         struct sk_softc         *sc;
374         int                     reg;
375         u_int32_t               val;
376 {
377 #ifdef SK_USEIOSPACE
378         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
379         CSR_WRITE_2(sc, SK_WIN_BASE + SK_REG(reg), val);
380 #else
381         CSR_WRITE_2(sc, reg, val);
382 #endif
383         return;
384 }
385
386 static void sk_win_write_1(sc, reg, val)
387         struct sk_softc         *sc;
388         int                     reg;
389         u_int32_t               val;
390 {
391 #ifdef SK_USEIOSPACE
392         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
393         CSR_WRITE_1(sc, SK_WIN_BASE + SK_REG(reg), val);
394 #else
395         CSR_WRITE_1(sc, reg, val);
396 #endif
397         return;
398 }
399
400 /*
401  * The VPD EEPROM contains Vital Product Data, as suggested in
402  * the PCI 2.1 specification. The VPD data is separared into areas
403  * denoted by resource IDs. The SysKonnect VPD contains an ID string
404  * resource (the name of the adapter), a read-only area resource
405  * containing various key/data fields and a read/write area which
406  * can be used to store asset management information or log messages.
407  * We read the ID string and read-only into buffers attached to
408  * the controller softc structure for later use. At the moment,
409  * we only use the ID string during sk_attach().
410  */
411 static u_int8_t sk_vpd_readbyte(sc, addr)
412         struct sk_softc         *sc;
413         int                     addr;
414 {
415         int                     i;
416
417         sk_win_write_2(sc, SK_PCI_REG(SK_PCI_VPD_ADDR), addr);
418         for (i = 0; i < SK_TIMEOUT; i++) {
419                 DELAY(1);
420                 if (sk_win_read_2(sc,
421                     SK_PCI_REG(SK_PCI_VPD_ADDR)) & SK_VPD_FLAG)
422                         break;
423         }
424
425         if (i == SK_TIMEOUT)
426                 return(0);
427
428         return(sk_win_read_1(sc, SK_PCI_REG(SK_PCI_VPD_DATA)));
429 }
430
431 static void sk_vpd_read_res(sc, res, addr)
432         struct sk_softc         *sc;
433         struct vpd_res          *res;
434         int                     addr;
435 {
436         int                     i;
437         u_int8_t                *ptr;
438
439         ptr = (u_int8_t *)res;
440         for (i = 0; i < sizeof(struct vpd_res); i++)
441                 ptr[i] = sk_vpd_readbyte(sc, i + addr);
442
443         return;
444 }
445
446 static void sk_vpd_read(sc)
447         struct sk_softc         *sc;
448 {
449         int                     pos = 0, i;
450         struct vpd_res          res;
451
452         if (sc->sk_vpd_prodname != NULL)
453                 free(sc->sk_vpd_prodname, M_DEVBUF);
454         if (sc->sk_vpd_readonly != NULL)
455                 free(sc->sk_vpd_readonly, M_DEVBUF);
456         sc->sk_vpd_prodname = NULL;
457         sc->sk_vpd_readonly = NULL;
458
459         sk_vpd_read_res(sc, &res, pos);
460
461         if (res.vr_id != VPD_RES_ID) {
462                 printf("skc%d: bad VPD resource id: expected %x got %x\n",
463                     sc->sk_unit, VPD_RES_ID, res.vr_id);
464                 return;
465         }
466
467         pos += sizeof(res);
468         sc->sk_vpd_prodname = malloc(res.vr_len + 1, M_DEVBUF, M_INTWAIT);
469         for (i = 0; i < res.vr_len; i++)
470                 sc->sk_vpd_prodname[i] = sk_vpd_readbyte(sc, i + pos);
471         sc->sk_vpd_prodname[i] = '\0';
472         pos += i;
473
474         sk_vpd_read_res(sc, &res, pos);
475
476         if (res.vr_id != VPD_RES_READ) {
477                 printf("skc%d: bad VPD resource id: expected %x got %x\n",
478                     sc->sk_unit, VPD_RES_READ, res.vr_id);
479                 return;
480         }
481
482         pos += sizeof(res);
483         sc->sk_vpd_readonly = malloc(res.vr_len, M_DEVBUF, M_INTWAIT);
484         for (i = 0; i < res.vr_len + 1; i++)
485                 sc->sk_vpd_readonly[i] = sk_vpd_readbyte(sc, i + pos);
486
487         return;
488 }
489
490 static int sk_miibus_readreg(dev, phy, reg)
491         device_t                dev;
492         int                     phy, reg;
493 {
494         struct sk_if_softc      *sc_if;
495
496         sc_if = device_get_softc(dev);
497
498         switch(sc_if->sk_softc->sk_type) {
499         case SK_GENESIS:
500                 return(sk_xmac_miibus_readreg(sc_if, phy, reg));
501         case SK_YUKON:
502                 return(sk_marv_miibus_readreg(sc_if, phy, reg));
503         }
504
505         return(0);
506 }
507
508 static int sk_miibus_writereg(dev, phy, reg, val)
509         device_t                dev;
510         int                     phy, reg, val;
511 {
512         struct sk_if_softc      *sc_if;
513
514         sc_if = device_get_softc(dev);
515
516         switch(sc_if->sk_softc->sk_type) {
517         case SK_GENESIS:
518                 return(sk_xmac_miibus_writereg(sc_if, phy, reg, val));
519         case SK_YUKON:
520                 return(sk_marv_miibus_writereg(sc_if, phy, reg, val));
521         }
522
523         return(0);
524 }
525
526 static void sk_miibus_statchg(dev)
527         device_t                dev;
528 {
529         struct sk_if_softc      *sc_if;
530
531         sc_if = device_get_softc(dev);
532
533         switch(sc_if->sk_softc->sk_type) {
534         case SK_GENESIS:
535                 sk_xmac_miibus_statchg(sc_if);
536                 break;
537         case SK_YUKON:
538                 sk_marv_miibus_statchg(sc_if);
539                 break;
540         }
541
542         return;
543 }
544
545 static int sk_xmac_miibus_readreg(sc_if, phy, reg)
546         struct sk_if_softc      *sc_if;
547         int                     phy, reg;
548 {
549         int                     i;
550
551         if (sc_if->sk_phytype == SK_PHYTYPE_XMAC && phy != 0)
552                 return(0);
553
554         SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8));
555         SK_XM_READ_2(sc_if, XM_PHY_DATA);
556         if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) {
557                 for (i = 0; i < SK_TIMEOUT; i++) {
558                         DELAY(1);
559                         if (SK_XM_READ_2(sc_if, XM_MMUCMD) &
560                             XM_MMUCMD_PHYDATARDY)
561                                 break;
562                 }
563
564                 if (i == SK_TIMEOUT) {
565                         printf("sk%d: phy failed to come ready\n",
566                             sc_if->sk_unit);
567                         return(0);
568                 }
569         }
570         DELAY(1);
571         return(SK_XM_READ_2(sc_if, XM_PHY_DATA));
572 }
573
574 static int sk_xmac_miibus_writereg(sc_if, phy, reg, val)
575         struct sk_if_softc      *sc_if;
576         int                     phy, reg, val;
577 {
578         int                     i;
579
580         SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8));
581         for (i = 0; i < SK_TIMEOUT; i++) {
582                 if (!(SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY))
583                         break;
584         }
585
586         if (i == SK_TIMEOUT) {
587                 printf("sk%d: phy failed to come ready\n", sc_if->sk_unit);
588                 return(ETIMEDOUT);
589         }
590
591         SK_XM_WRITE_2(sc_if, XM_PHY_DATA, val);
592         for (i = 0; i < SK_TIMEOUT; i++) {
593                 DELAY(1);
594                 if (!(SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY))
595                         break;
596         }
597
598         if (i == SK_TIMEOUT)
599                 printf("sk%d: phy write timed out\n", sc_if->sk_unit);
600
601         return(0);
602 }
603
604 static void sk_xmac_miibus_statchg(sc_if)
605         struct sk_if_softc      *sc_if;
606 {
607         struct mii_data         *mii;
608
609         mii = device_get_softc(sc_if->sk_miibus);
610
611         /*
612          * If this is a GMII PHY, manually set the XMAC's
613          * duplex mode accordingly.
614          */
615         if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) {
616                 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
617                         SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX);
618                 } else {
619                         SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX);
620                 }
621         }
622
623         return;
624 }
625
626 static int sk_marv_miibus_readreg(sc_if, phy, reg)
627         struct sk_if_softc      *sc_if;
628         int                     phy, reg;
629 {
630         u_int16_t               val;
631         int                     i;
632
633         if (phy != 0 ||
634             (sc_if->sk_phytype != SK_PHYTYPE_MARV_COPPER &&
635              sc_if->sk_phytype != SK_PHYTYPE_MARV_FIBER)) {
636                 return(0);
637         }
638
639         SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) |
640                       YU_SMICR_REGAD(reg) | YU_SMICR_OP_READ);
641         
642         for (i = 0; i < SK_TIMEOUT; i++) {
643                 DELAY(1);
644                 val = SK_YU_READ_2(sc_if, YUKON_SMICR);
645                 if (val & YU_SMICR_READ_VALID)
646                         break;
647         }
648
649         if (i == SK_TIMEOUT) {
650                 printf("sk%d: phy failed to come ready\n",
651                     sc_if->sk_unit);
652                 return(0);
653         }
654         
655         val = SK_YU_READ_2(sc_if, YUKON_SMIDR);
656
657         return(val);
658 }
659
660 static int sk_marv_miibus_writereg(sc_if, phy, reg, val)
661         struct sk_if_softc      *sc_if;
662         int                     phy, reg, val;
663 {
664         int                     i;
665
666         SK_YU_WRITE_2(sc_if, YUKON_SMIDR, val);
667         SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) |
668                       YU_SMICR_REGAD(reg) | YU_SMICR_OP_WRITE);
669
670         for (i = 0; i < SK_TIMEOUT; i++) {
671                 DELAY(1);
672                 if (SK_YU_READ_2(sc_if, YUKON_SMICR) & YU_SMICR_BUSY)
673                         break;
674         }
675
676         return(0);
677 }
678
679 static void sk_marv_miibus_statchg(sc_if)
680         struct sk_if_softc      *sc_if;
681 {
682         return;
683 }
684
685 #define XMAC_POLY               0xEDB88320
686 #define GMAC_POLY               0x04C11DB7L
687 #define HASH_BITS               6
688
689 static u_int32_t xmac_calchash(addr)
690         caddr_t                 addr;
691 {
692         u_int32_t               idx, bit, data, crc;
693
694         /* Compute CRC for the address value. */
695         crc = 0xFFFFFFFF; /* initial value */
696
697         for (idx = 0; idx < 6; idx++) {
698                 for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1)
699                         crc = (crc >> 1) ^ (((crc ^ data) & 1) ? XMAC_POLY : 0);
700         }
701
702         return (~crc & ((1 << HASH_BITS) - 1));
703 }
704
705 static u_int32_t gmac_calchash(addr)
706     caddr_t                     addr;
707 {
708     u_int32_t               idx, bit, crc, tmpData, data;
709
710     /* Compute CRC for the address value. */
711     crc = 0xFFFFFFFF; /* initial value */
712
713     for (idx = 0; idx < 6; idx++) {
714         data = *addr++;
715
716         /* Change bit order in byte. */
717         tmpData = data;
718         for (bit = 0; bit < 8; bit++) {
719             if (tmpData & 1) {
720                 data |=  1 << (7 - bit);
721             }
722             else {
723                 data &= ~(1 << (7 - bit));
724             }
725
726             tmpData >>= 1;
727         }
728
729         crc ^= (data << 24);
730         for (bit = 0; bit < 8; bit++) {
731             if (crc & 0x80000000) {
732                 crc = (crc << 1) ^ GMAC_POLY;
733             } else {
734                 crc <<= 1;
735             }
736         }
737     }
738
739     return (crc & ((1 << HASH_BITS) - 1));
740 }
741
742 static void sk_setfilt(sc_if, addr, slot)
743         struct sk_if_softc      *sc_if;
744         caddr_t                 addr;
745         int                     slot;
746 {
747         int                     base;
748
749         base = XM_RXFILT_ENTRY(slot);
750
751         SK_XM_WRITE_2(sc_if, base, *(u_int16_t *)(&addr[0]));
752         SK_XM_WRITE_2(sc_if, base + 2, *(u_int16_t *)(&addr[2]));
753         SK_XM_WRITE_2(sc_if, base + 4, *(u_int16_t *)(&addr[4]));
754
755         return;
756 }
757
758 static void sk_setmulti(sc_if)
759         struct sk_if_softc      *sc_if;
760 {
761         struct sk_softc         *sc = sc_if->sk_softc;
762         struct ifnet            *ifp = &sc_if->arpcom.ac_if;
763         u_int32_t               hashes[2] = { 0, 0 };
764         int                     h, i;
765         struct ifmultiaddr      *ifma;
766         u_int8_t                dummy[] = { 0, 0, 0, 0, 0 ,0 };
767
768
769         /* First, zot all the existing filters. */
770         switch(sc->sk_type) {
771         case SK_GENESIS:
772                 for (i = 1; i < XM_RXFILT_MAX; i++)
773                         sk_setfilt(sc_if, (caddr_t)&dummy, i);
774
775                 SK_XM_WRITE_4(sc_if, XM_MAR0, 0);
776                 SK_XM_WRITE_4(sc_if, XM_MAR2, 0);
777                 break;
778         case SK_YUKON:
779                 SK_YU_WRITE_2(sc_if, YUKON_MCAH1, 0);
780                 SK_YU_WRITE_2(sc_if, YUKON_MCAH2, 0);
781                 SK_YU_WRITE_2(sc_if, YUKON_MCAH3, 0);
782                 SK_YU_WRITE_2(sc_if, YUKON_MCAH4, 0);
783                 break;
784         }
785
786         /* Now program new ones. */
787         if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
788                 hashes[0] = 0xFFFFFFFF;
789                 hashes[1] = 0xFFFFFFFF;
790         } else {
791                 i = 1;
792                 /* First find the tail of the list. */
793                 for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
794                                         ifma = ifma->ifma_link.le_next) {
795                         if (ifma->ifma_link.le_next == NULL)
796                                 break;
797                 }
798                 /* Now traverse the list backwards. */
799                 for (; ifma != NULL && ifma != (void *)&ifp->if_multiaddrs;
800                         ifma = (struct ifmultiaddr *)ifma->ifma_link.le_prev) {
801                         if (ifma->ifma_addr->sa_family != AF_LINK)
802                                 continue;
803                         /*
804                          * Program the first XM_RXFILT_MAX multicast groups
805                          * into the perfect filter. For all others,
806                          * use the hash table.
807                          */
808                         if (sc->sk_type == SK_GENESIS && i < XM_RXFILT_MAX) {
809                                 sk_setfilt(sc_if,
810                         LLADDR((struct sockaddr_dl *)ifma->ifma_addr), i);
811                                 i++;
812                                 continue;
813                         }
814
815                         switch(sc->sk_type) {
816                         case SK_GENESIS:
817                             h = xmac_calchash(
818                                 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
819                             if (h < 32)
820                                 hashes[0] |= (1 << h);
821                             else
822                                 hashes[1] |= (1 << (h - 32));
823                             break;
824
825                         case SK_YUKON:
826                             h = gmac_calchash(
827                                 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
828                             if (h < 32)
829                                 hashes[0] |= (1 << h);
830                             else
831                                 hashes[1] |= (1 << (h - 32));
832                             break;
833                         }
834                 }
835         }
836
837         switch(sc->sk_type) {
838         case SK_GENESIS:
839                 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_HASH|
840                                XM_MODE_RX_USE_PERFECT);
841                 SK_XM_WRITE_4(sc_if, XM_MAR0, hashes[0]);
842                 SK_XM_WRITE_4(sc_if, XM_MAR2, hashes[1]);
843                 break;
844         case SK_YUKON:
845                 SK_YU_WRITE_2(sc_if, YUKON_MCAH1, hashes[0] & 0xffff);
846                 SK_YU_WRITE_2(sc_if, YUKON_MCAH2, (hashes[0] >> 16) & 0xffff);
847                 SK_YU_WRITE_2(sc_if, YUKON_MCAH3, hashes[1] & 0xffff);
848                 SK_YU_WRITE_2(sc_if, YUKON_MCAH4, (hashes[1] >> 16) & 0xffff);
849                 break;
850         }
851
852         return;
853 }
854
855 static void sk_setpromisc(sc_if)
856         struct sk_if_softc      *sc_if;
857 {
858         struct sk_softc         *sc = sc_if->sk_softc;
859         struct ifnet            *ifp = &sc_if->arpcom.ac_if;
860
861         switch(sc->sk_type) {
862         case SK_GENESIS:
863                 if (ifp->if_flags & IFF_PROMISC) {
864                         SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC);
865                 } else {
866                         SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC);
867                 }
868                 break;
869         case SK_YUKON:
870                 if (ifp->if_flags & IFF_PROMISC) {
871                         SK_YU_CLRBIT_2(sc_if, YUKON_RCR,
872                             YU_RCR_UFLEN | YU_RCR_MUFLEN);
873                 } else {
874                         SK_YU_SETBIT_2(sc_if, YUKON_RCR,
875                             YU_RCR_UFLEN | YU_RCR_MUFLEN);
876                 }
877                 break;
878         }
879
880         return;
881 }
882
883 static int sk_init_rx_ring(sc_if)
884         struct sk_if_softc      *sc_if;
885 {
886         struct sk_chain_data    *cd = &sc_if->sk_cdata;
887         struct sk_ring_data     *rd = sc_if->sk_rdata;
888         int                     i;
889
890         bzero((char *)rd->sk_rx_ring,
891             sizeof(struct sk_rx_desc) * SK_RX_RING_CNT);
892
893         for (i = 0; i < SK_RX_RING_CNT; i++) {
894                 cd->sk_rx_chain[i].sk_desc = &rd->sk_rx_ring[i];
895                 if (sk_newbuf(sc_if, &cd->sk_rx_chain[i], NULL) == ENOBUFS)
896                         return(ENOBUFS);
897                 if (i == (SK_RX_RING_CNT - 1)) {
898                         cd->sk_rx_chain[i].sk_next =
899                             &cd->sk_rx_chain[0];
900                         rd->sk_rx_ring[i].sk_next = 
901                             vtophys(&rd->sk_rx_ring[0]);
902                 } else {
903                         cd->sk_rx_chain[i].sk_next =
904                             &cd->sk_rx_chain[i + 1];
905                         rd->sk_rx_ring[i].sk_next = 
906                             vtophys(&rd->sk_rx_ring[i + 1]);
907                 }
908         }
909
910         sc_if->sk_cdata.sk_rx_prod = 0;
911         sc_if->sk_cdata.sk_rx_cons = 0;
912
913         return(0);
914 }
915
916 static void sk_init_tx_ring(sc_if)
917         struct sk_if_softc      *sc_if;
918 {
919         struct sk_chain_data    *cd = &sc_if->sk_cdata;
920         struct sk_ring_data     *rd = sc_if->sk_rdata;
921         int                     i;
922
923         bzero((char *)sc_if->sk_rdata->sk_tx_ring,
924             sizeof(struct sk_tx_desc) * SK_TX_RING_CNT);
925
926         for (i = 0; i < SK_TX_RING_CNT; i++) {
927                 cd->sk_tx_chain[i].sk_desc = &rd->sk_tx_ring[i];
928                 if (i == (SK_TX_RING_CNT - 1)) {
929                         cd->sk_tx_chain[i].sk_next =
930                             &cd->sk_tx_chain[0];
931                         rd->sk_tx_ring[i].sk_next = 
932                             vtophys(&rd->sk_tx_ring[0]);
933                 } else {
934                         cd->sk_tx_chain[i].sk_next =
935                             &cd->sk_tx_chain[i + 1];
936                         rd->sk_tx_ring[i].sk_next = 
937                             vtophys(&rd->sk_tx_ring[i + 1]);
938                 }
939         }
940
941         sc_if->sk_cdata.sk_tx_prod = 0;
942         sc_if->sk_cdata.sk_tx_cons = 0;
943         sc_if->sk_cdata.sk_tx_cnt = 0;
944
945         return;
946 }
947
948 static int sk_newbuf(sc_if, c, m)
949         struct sk_if_softc      *sc_if;
950         struct sk_chain         *c;
951         struct mbuf             *m;
952 {
953         struct mbuf             *m_new = NULL;
954         struct sk_rx_desc       *r;
955
956         if (m == NULL) {
957                 caddr_t                 *buf = NULL;
958
959                 MGETHDR(m_new, MB_DONTWAIT, MT_DATA);
960                 if (m_new == NULL)
961                         return(ENOBUFS);
962
963                 /* Allocate the jumbo buffer */
964                 buf = sk_jalloc(sc_if);
965                 if (buf == NULL) {
966                         m_freem(m_new);
967 #ifdef SK_VERBOSE
968                         printf("sk%d: jumbo allocation failed "
969                             "-- packet dropped!\n", sc_if->sk_unit);
970 #endif
971                         return(ENOBUFS);
972                 }
973
974                 /* Attach the buffer to the mbuf */
975                 m_new->m_data = m_new->m_ext.ext_buf = (void *)buf;
976                 m_new->m_flags |= M_EXT | M_EXT_OLD;
977                 m_new->m_ext.ext_size = m_new->m_pkthdr.len =
978                     m_new->m_len = SK_MCLBYTES;
979                 m_new->m_ext.ext_nfree.old = sk_jfree;
980                 m_new->m_ext.ext_nref.old = sk_jref;
981         } else {
982                 /*
983                  * We're re-using a previously allocated mbuf;
984                  * be sure to re-init pointers and lengths to
985                  * default values.
986                  */
987                 m_new = m;
988                 m_new->m_len = m_new->m_pkthdr.len = SK_MCLBYTES;
989                 m_new->m_data = m_new->m_ext.ext_buf;
990         }
991
992         /*
993          * Adjust alignment so packet payload begins on a
994          * longword boundary. Mandatory for Alpha, useful on
995          * x86 too.
996          */
997         m_adj(m_new, ETHER_ALIGN);
998
999         r = c->sk_desc;
1000         c->sk_mbuf = m_new;
1001         r->sk_data_lo = vtophys(mtod(m_new, caddr_t));
1002         r->sk_ctl = m_new->m_len | SK_RXSTAT;
1003
1004         return(0);
1005 }
1006
1007 /*
1008  * Allocate jumbo buffer storage. The SysKonnect adapters support
1009  * "jumbograms" (9K frames), although SysKonnect doesn't currently
1010  * use them in their drivers. In order for us to use them, we need
1011  * large 9K receive buffers, however standard mbuf clusters are only
1012  * 2048 bytes in size. Consequently, we need to allocate and manage
1013  * our own jumbo buffer pool. Fortunately, this does not require an
1014  * excessive amount of additional code.
1015  */
1016 static int sk_alloc_jumbo_mem(sc_if)
1017         struct sk_if_softc      *sc_if;
1018 {
1019         caddr_t                 ptr;
1020         int             i;
1021         struct sk_jpool_entry   *entry;
1022
1023         /* Grab a big chunk o' storage. */
1024         sc_if->sk_cdata.sk_jumbo_buf = contigmalloc(SK_JMEM, M_DEVBUF,
1025             M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
1026
1027         if (sc_if->sk_cdata.sk_jumbo_buf == NULL) {
1028                 printf("sk%d: no memory for jumbo buffers!\n", sc_if->sk_unit);
1029                 return(ENOBUFS);
1030         }
1031
1032         SLIST_INIT(&sc_if->sk_jfree_listhead);
1033         SLIST_INIT(&sc_if->sk_jinuse_listhead);
1034
1035         /*
1036          * Now divide it up into 9K pieces and save the addresses
1037          * in an array. Note that we play an evil trick here by using
1038          * the first few bytes in the buffer to hold the the address
1039          * of the softc structure for this interface. This is because
1040          * sk_jfree() needs it, but it is called by the mbuf management
1041          * code which will not pass it to us explicitly.
1042          */
1043         ptr = sc_if->sk_cdata.sk_jumbo_buf;
1044         for (i = 0; i < SK_JSLOTS; i++) {
1045                 u_int64_t               **aptr;
1046                 aptr = (u_int64_t **)ptr;
1047                 aptr[0] = (u_int64_t *)sc_if;
1048                 ptr += sizeof(u_int64_t);
1049                 sc_if->sk_cdata.sk_jslots[i].sk_buf = ptr;
1050                 sc_if->sk_cdata.sk_jslots[i].sk_inuse = 0;
1051                 ptr += SK_MCLBYTES;
1052                 entry = malloc(sizeof(struct sk_jpool_entry), 
1053                     M_DEVBUF, M_WAITOK);
1054                 if (entry == NULL) {
1055                         free(sc_if->sk_cdata.sk_jumbo_buf, M_DEVBUF);
1056                         sc_if->sk_cdata.sk_jumbo_buf = NULL;
1057                         printf("sk%d: no memory for jumbo "
1058                             "buffer queue!\n", sc_if->sk_unit);
1059                         return(ENOBUFS);
1060                 }
1061                 entry->slot = i;
1062                 SLIST_INSERT_HEAD(&sc_if->sk_jfree_listhead,
1063                     entry, jpool_entries);
1064         }
1065
1066         return(0);
1067 }
1068
1069 /*
1070  * Allocate a jumbo buffer.
1071  */
1072 static void *sk_jalloc(sc_if)
1073         struct sk_if_softc      *sc_if;
1074 {
1075         struct sk_jpool_entry   *entry;
1076         
1077         entry = SLIST_FIRST(&sc_if->sk_jfree_listhead);
1078         
1079         if (entry == NULL) {
1080 #ifdef SK_VERBOSE
1081                 printf("sk%d: no free jumbo buffers\n", sc_if->sk_unit);
1082 #endif
1083                 return(NULL);
1084         }
1085
1086         SLIST_REMOVE_HEAD(&sc_if->sk_jfree_listhead, jpool_entries);
1087         SLIST_INSERT_HEAD(&sc_if->sk_jinuse_listhead, entry, jpool_entries);
1088         sc_if->sk_cdata.sk_jslots[entry->slot].sk_inuse = 1;
1089         return(sc_if->sk_cdata.sk_jslots[entry->slot].sk_buf);
1090 }
1091
1092 /*
1093  * Adjust usage count on a jumbo buffer. In general this doesn't
1094  * get used much because our jumbo buffers don't get passed around
1095  * a lot, but it's implemented for correctness.
1096  */
1097 static void sk_jref(buf, size)
1098         caddr_t                 buf;
1099         u_int                   size;
1100 {
1101         struct sk_if_softc      *sc_if;
1102         u_int64_t               **aptr;
1103         int             i;
1104
1105         /* Extract the softc struct pointer. */
1106         aptr = (u_int64_t **)(buf - sizeof(u_int64_t));
1107         sc_if = (struct sk_if_softc *)(aptr[0]);
1108
1109         if (sc_if == NULL)
1110                 panic("sk_jref: can't find softc pointer!");
1111
1112         if (size != SK_MCLBYTES)
1113                 panic("sk_jref: adjusting refcount of buf of wrong size!");
1114
1115         /* calculate the slot this buffer belongs to */
1116
1117         i = ((vm_offset_t)aptr 
1118              - (vm_offset_t)sc_if->sk_cdata.sk_jumbo_buf) / SK_JLEN;
1119
1120         if ((i < 0) || (i >= SK_JSLOTS))
1121                 panic("sk_jref: asked to reference buffer "
1122                     "that we don't manage!");
1123         else if (sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0)
1124                 panic("sk_jref: buffer already free!");
1125         else
1126                 sc_if->sk_cdata.sk_jslots[i].sk_inuse++;
1127
1128         return;
1129 }
1130
1131 /*
1132  * Release a jumbo buffer.
1133  */
1134 static void sk_jfree(buf, size)
1135         caddr_t                 buf;
1136         u_int                   size;
1137 {
1138         struct sk_if_softc      *sc_if;
1139         u_int64_t               **aptr;
1140         int                     i;
1141         struct sk_jpool_entry   *entry;
1142
1143         /* Extract the softc struct pointer. */
1144         aptr = (u_int64_t **)(buf - sizeof(u_int64_t));
1145         sc_if = (struct sk_if_softc *)(aptr[0]);
1146
1147         if (sc_if == NULL)
1148                 panic("sk_jfree: can't find softc pointer!");
1149
1150         if (size != SK_MCLBYTES)
1151                 panic("sk_jfree: freeing buffer of wrong size!");
1152
1153         /* calculate the slot this buffer belongs to */
1154
1155         i = ((vm_offset_t)aptr 
1156              - (vm_offset_t)sc_if->sk_cdata.sk_jumbo_buf) / SK_JLEN;
1157
1158         if ((i < 0) || (i >= SK_JSLOTS))
1159                 panic("sk_jfree: asked to free buffer that we don't manage!");
1160         else if (sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0)
1161                 panic("sk_jfree: buffer already free!");
1162         else {
1163                 sc_if->sk_cdata.sk_jslots[i].sk_inuse--;
1164                 if(sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0) {
1165                         entry = SLIST_FIRST(&sc_if->sk_jinuse_listhead);
1166                         if (entry == NULL)
1167                                 panic("sk_jfree: buffer not in use!");
1168                         entry->slot = i;
1169                         SLIST_REMOVE_HEAD(&sc_if->sk_jinuse_listhead, 
1170                                           jpool_entries);
1171                         SLIST_INSERT_HEAD(&sc_if->sk_jfree_listhead, 
1172                                           entry, jpool_entries);
1173                 }
1174         }
1175
1176         return;
1177 }
1178
1179 /*
1180  * Set media options.
1181  */
1182 static int sk_ifmedia_upd(ifp)
1183         struct ifnet            *ifp;
1184 {
1185         struct sk_if_softc      *sc_if = ifp->if_softc;
1186         struct mii_data         *mii;
1187
1188         mii = device_get_softc(sc_if->sk_miibus);
1189         sk_init(sc_if);
1190         mii_mediachg(mii);
1191
1192         return(0);
1193 }
1194
1195 /*
1196  * Report current media status.
1197  */
1198 static void sk_ifmedia_sts(ifp, ifmr)
1199         struct ifnet            *ifp;
1200         struct ifmediareq       *ifmr;
1201 {
1202         struct sk_if_softc      *sc_if;
1203         struct mii_data         *mii;
1204
1205         sc_if = ifp->if_softc;
1206         mii = device_get_softc(sc_if->sk_miibus);
1207
1208         mii_pollstat(mii);
1209         ifmr->ifm_active = mii->mii_media_active;
1210         ifmr->ifm_status = mii->mii_media_status;
1211
1212         return;
1213 }
1214
1215 static int sk_ioctl(ifp, command, data, cr)
1216         struct ifnet            *ifp;
1217         u_long                  command;
1218         caddr_t                 data;
1219         struct ucred            *cr;
1220 {
1221         struct sk_if_softc      *sc_if = ifp->if_softc;
1222         struct ifreq            *ifr = (struct ifreq *) data;
1223         int                     s, error = 0;
1224         struct mii_data         *mii;
1225
1226         s = splimp();
1227
1228         switch(command) {
1229         case SIOCSIFADDR:
1230         case SIOCGIFADDR:
1231                 error = ether_ioctl(ifp, command, data);
1232                 break;
1233         case SIOCSIFMTU:
1234                 if (ifr->ifr_mtu > SK_JUMBO_MTU)
1235                         error = EINVAL;
1236                 else {
1237                         ifp->if_mtu = ifr->ifr_mtu;
1238                         sk_init(sc_if);
1239                 }
1240                 break;
1241         case SIOCSIFFLAGS:
1242                 if (ifp->if_flags & IFF_UP) {
1243                         if (ifp->if_flags & IFF_RUNNING) {
1244                                 if ((ifp->if_flags ^ sc_if->sk_if_flags)
1245                                     & IFF_PROMISC) {
1246                                         sk_setpromisc(sc_if);
1247                                         sk_setmulti(sc_if);
1248                                 }
1249                         } else
1250                                 sk_init(sc_if);
1251                 } else {
1252                         if (ifp->if_flags & IFF_RUNNING)
1253                                 sk_stop(sc_if);
1254                 }
1255                 sc_if->sk_if_flags = ifp->if_flags;
1256                 error = 0;
1257                 break;
1258         case SIOCADDMULTI:
1259         case SIOCDELMULTI:
1260                 sk_setmulti(sc_if);
1261                 error = 0;
1262                 break;
1263         case SIOCGIFMEDIA:
1264         case SIOCSIFMEDIA:
1265                 mii = device_get_softc(sc_if->sk_miibus);
1266                 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
1267                 break;
1268         default:
1269                 error = EINVAL;
1270                 break;
1271         }
1272
1273         (void)splx(s);
1274
1275         return(error);
1276 }
1277
1278 /*
1279  * Probe for a SysKonnect GEnesis chip. Check the PCI vendor and device
1280  * IDs against our list and return a device name if we find a match.
1281  */
1282 static int skc_probe(dev)
1283         device_t                dev;
1284 {
1285         struct sk_softc         *sc;
1286         struct sk_type          *t = sk_devs;
1287
1288         sc = device_get_softc(dev);
1289
1290         while(t->sk_name != NULL) {
1291                 if ((pci_get_vendor(dev) == t->sk_vid) &&
1292                     (pci_get_device(dev) == t->sk_did)) {
1293                         device_set_desc(dev, t->sk_name);
1294                         return(0);
1295                 }
1296                 t++;
1297         }
1298
1299         return(ENXIO);
1300 }
1301
1302 /*
1303  * Force the GEnesis into reset, then bring it out of reset.
1304  */
1305 static void sk_reset(sc)
1306         struct sk_softc         *sc;
1307 {
1308         CSR_WRITE_2(sc, SK_CSR, SK_CSR_SW_RESET);
1309         CSR_WRITE_2(sc, SK_CSR, SK_CSR_MASTER_RESET);
1310         if (sc->sk_type == SK_YUKON)
1311                 CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_SET);
1312
1313         DELAY(1000);
1314         CSR_WRITE_2(sc, SK_CSR, SK_CSR_SW_UNRESET);
1315         DELAY(2);
1316         CSR_WRITE_2(sc, SK_CSR, SK_CSR_MASTER_UNRESET);
1317         if (sc->sk_type == SK_YUKON)
1318                 CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_CLEAR);
1319
1320         if (sc->sk_type == SK_GENESIS) {
1321                 /* Configure packet arbiter */
1322                 sk_win_write_2(sc, SK_PKTARB_CTL, SK_PKTARBCTL_UNRESET);
1323                 sk_win_write_2(sc, SK_RXPA1_TINIT, SK_PKTARB_TIMEOUT);
1324                 sk_win_write_2(sc, SK_TXPA1_TINIT, SK_PKTARB_TIMEOUT);
1325                 sk_win_write_2(sc, SK_RXPA2_TINIT, SK_PKTARB_TIMEOUT);
1326                 sk_win_write_2(sc, SK_TXPA2_TINIT, SK_PKTARB_TIMEOUT);
1327         }
1328
1329         /* Enable RAM interface */
1330         sk_win_write_4(sc, SK_RAMCTL, SK_RAMCTL_UNRESET);
1331
1332         /*
1333          * Configure interrupt moderation. The moderation timer
1334          * defers interrupts specified in the interrupt moderation
1335          * timer mask based on the timeout specified in the interrupt
1336          * moderation timer init register. Each bit in the timer
1337          * register represents 18.825ns, so to specify a timeout in
1338          * microseconds, we have to multiply by 54.
1339          */
1340         sk_win_write_4(sc, SK_IMTIMERINIT, SK_IM_USECS(200));
1341         sk_win_write_4(sc, SK_IMMR, SK_ISR_TX1_S_EOF|SK_ISR_TX2_S_EOF|
1342             SK_ISR_RX1_EOF|SK_ISR_RX2_EOF);
1343         sk_win_write_1(sc, SK_IMTIMERCTL, SK_IMCTL_START);
1344
1345         return;
1346 }
1347
1348 static int sk_probe(dev)
1349         device_t                dev;
1350 {
1351         struct sk_softc         *sc;
1352
1353         sc = device_get_softc(device_get_parent(dev));
1354
1355         /*
1356          * Not much to do here. We always know there will be
1357          * at least one XMAC present, and if there are two,
1358          * skc_attach() will create a second device instance
1359          * for us.
1360          */
1361         switch (sc->sk_type) {
1362         case SK_GENESIS:
1363                 device_set_desc(dev, "XaQti Corp. XMAC II");
1364                 break;
1365         case SK_YUKON:
1366                 device_set_desc(dev, "Marvell Semiconductor, Inc. Yukon");
1367                 break;
1368         }
1369
1370         return(0);
1371 }
1372
1373 /*
1374  * Each XMAC chip is attached as a separate logical IP interface.
1375  * Single port cards will have only one logical interface of course.
1376  */
1377 static int sk_attach(dev)
1378         device_t                dev;
1379 {
1380         struct sk_softc         *sc;
1381         struct sk_if_softc      *sc_if;
1382         struct ifnet            *ifp;
1383         int                     i, port;
1384
1385         if (dev == NULL)
1386                 return(EINVAL);
1387
1388         sc_if = device_get_softc(dev);
1389         sc = device_get_softc(device_get_parent(dev));
1390         port = *(int *)device_get_ivars(dev);
1391         free(device_get_ivars(dev), M_DEVBUF);
1392         device_set_ivars(dev, NULL);
1393         sc_if->sk_dev = dev;
1394         callout_init(&sc_if->sk_tick_timer);
1395
1396         bzero((char *)sc_if, sizeof(struct sk_if_softc));
1397
1398         sc_if->sk_dev = dev;
1399         sc_if->sk_unit = device_get_unit(dev);
1400         sc_if->sk_port = port;
1401         sc_if->sk_softc = sc;
1402         sc->sk_if[port] = sc_if;
1403         if (port == SK_PORT_A)
1404                 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR0;
1405         if (port == SK_PORT_B)
1406                 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR1;
1407
1408         /*
1409          * Get station address for this interface. Note that
1410          * dual port cards actually come with three station
1411          * addresses: one for each port, plus an extra. The
1412          * extra one is used by the SysKonnect driver software
1413          * as a 'virtual' station address for when both ports
1414          * are operating in failover mode. Currently we don't
1415          * use this extra address.
1416          */
1417         for (i = 0; i < ETHER_ADDR_LEN; i++)
1418                 sc_if->arpcom.ac_enaddr[i] =
1419                     sk_win_read_1(sc, SK_MAC0_0 + (port * 8) + i);
1420
1421         /*
1422          * Set up RAM buffer addresses. The NIC will have a certain
1423          * amount of SRAM on it, somewhere between 512K and 2MB. We
1424          * need to divide this up a) between the transmitter and
1425          * receiver and b) between the two XMACs, if this is a
1426          * dual port NIC. Our algotithm is to divide up the memory
1427          * evenly so that everyone gets a fair share.
1428          */
1429         if (sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC) {
1430                 u_int32_t               chunk, val;
1431
1432                 chunk = sc->sk_ramsize / 2;
1433                 val = sc->sk_rboff / sizeof(u_int64_t);
1434                 sc_if->sk_rx_ramstart = val;
1435                 val += (chunk / sizeof(u_int64_t));
1436                 sc_if->sk_rx_ramend = val - 1;
1437                 sc_if->sk_tx_ramstart = val;
1438                 val += (chunk / sizeof(u_int64_t));
1439                 sc_if->sk_tx_ramend = val - 1;
1440         } else {
1441                 u_int32_t               chunk, val;
1442
1443                 chunk = sc->sk_ramsize / 4;
1444                 val = (sc->sk_rboff + (chunk * 2 * sc_if->sk_port)) /
1445                     sizeof(u_int64_t);
1446                 sc_if->sk_rx_ramstart = val;
1447                 val += (chunk / sizeof(u_int64_t));
1448                 sc_if->sk_rx_ramend = val - 1;
1449                 sc_if->sk_tx_ramstart = val;
1450                 val += (chunk / sizeof(u_int64_t));
1451                 sc_if->sk_tx_ramend = val - 1;
1452         }
1453
1454         /* Read and save PHY type and set PHY address */
1455         sc_if->sk_phytype = sk_win_read_1(sc, SK_EPROM1) & 0xF;
1456         switch(sc_if->sk_phytype) {
1457         case SK_PHYTYPE_XMAC:
1458                 sc_if->sk_phyaddr = SK_PHYADDR_XMAC;
1459                 break;
1460         case SK_PHYTYPE_BCOM:
1461                 sc_if->sk_phyaddr = SK_PHYADDR_BCOM;
1462                 break;
1463         case SK_PHYTYPE_MARV_COPPER:
1464                 sc_if->sk_phyaddr = SK_PHYADDR_MARV;
1465                 break;
1466         default:
1467                 printf("skc%d: unsupported PHY type: %d\n",
1468                     sc->sk_unit, sc_if->sk_phytype);
1469                 return(ENODEV);
1470         }
1471
1472         /* Allocate the descriptor queues. */
1473         sc_if->sk_rdata = contigmalloc(sizeof(struct sk_ring_data), M_DEVBUF,
1474             M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
1475
1476         if (sc_if->sk_rdata == NULL) {
1477                 printf("sk%d: no memory for list buffers!\n", sc_if->sk_unit);
1478                 sc->sk_if[port] = NULL;
1479                 return(ENOMEM);
1480         }
1481
1482         bzero(sc_if->sk_rdata, sizeof(struct sk_ring_data));
1483
1484         /* Try to allocate memory for jumbo buffers. */
1485         if (sk_alloc_jumbo_mem(sc_if)) {
1486                 printf("sk%d: jumbo buffer allocation failed\n",
1487                     sc_if->sk_unit);
1488                 contigfree(sc_if->sk_rdata,
1489                     sizeof(struct sk_ring_data), M_DEVBUF);
1490                 sc->sk_if[port] = NULL;
1491                 return(ENOMEM);
1492         }
1493
1494         ifp = &sc_if->arpcom.ac_if;
1495         ifp->if_softc = sc_if;
1496         if_initname(ifp, "sk", sc_if->sk_unit);
1497         ifp->if_mtu = ETHERMTU;
1498         ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
1499         ifp->if_ioctl = sk_ioctl;
1500         ifp->if_start = sk_start;
1501         ifp->if_watchdog = sk_watchdog;
1502         ifp->if_init = sk_init;
1503         ifp->if_baudrate = 1000000000;
1504         ifq_set_maxlen(&ifp->if_snd, SK_TX_RING_CNT - 1);
1505         ifq_set_ready(&ifp->if_snd);
1506
1507         /*
1508          * Do miibus setup.
1509          */
1510         switch (sc->sk_type) {
1511         case SK_GENESIS:
1512                 sk_init_xmac(sc_if);
1513                 break;
1514         case SK_YUKON:
1515                 sk_init_yukon(sc_if);
1516                 break;
1517         }
1518
1519         if (mii_phy_probe(dev, &sc_if->sk_miibus,
1520             sk_ifmedia_upd, sk_ifmedia_sts)) {
1521                 printf("skc%d: no PHY found!\n", sc_if->sk_unit);
1522                 contigfree(sc_if->sk_cdata.sk_jumbo_buf, SK_JMEM,
1523                     M_DEVBUF);
1524                 contigfree(sc_if->sk_rdata,
1525                     sizeof(struct sk_ring_data), M_DEVBUF);
1526                 return(ENXIO);
1527         }
1528
1529         /*
1530          * Call MI attach routine.
1531          */
1532         ether_ifattach(ifp, sc_if->arpcom.ac_enaddr);
1533         callout_init(&sc_if->sk_tick_timer);
1534
1535         return(0);
1536 }
1537
1538 /*
1539  * Attach the interface. Allocate softc structures, do ifmedia
1540  * setup and ethernet/BPF attach.
1541  */
1542 static int skc_attach(dev)
1543         device_t                dev;
1544 {
1545         int                     s;
1546         u_int32_t               command;
1547         struct sk_softc         *sc;
1548         int                     unit, error = 0, rid, *port;
1549         uint8_t                 skrs;
1550
1551         s = splimp();
1552
1553         sc = device_get_softc(dev);
1554         unit = device_get_unit(dev);
1555         bzero(sc, sizeof(struct sk_softc));
1556         switch (pci_get_device(dev)) {
1557         case DEVICEID_SK_V1:
1558                 sc->sk_type = SK_GENESIS;
1559                 break;
1560         case DEVICEID_SK_V2:
1561         case DEVICEID_3COM_3C940:
1562         case DEVICEID_LINKSYS_EG1032:
1563         case DEVICEID_DLINK_DGE530T:
1564                 sc->sk_type = SK_YUKON;
1565                 break;
1566         }
1567
1568         /*
1569          * Handle power management nonsense.
1570          */
1571         command = pci_read_config(dev, SK_PCI_CAPID, 4) & 0x000000FF;
1572         if (command == 0x01) {
1573                 command = pci_read_config(dev, SK_PCI_PWRMGMTCTRL, 4);
1574                 if (command & SK_PSTATE_MASK) {
1575                         u_int32_t               iobase, membase, irq;
1576
1577                         /* Save important PCI config data. */
1578                         iobase = pci_read_config(dev, SK_PCI_LOIO, 4);
1579                         membase = pci_read_config(dev, SK_PCI_LOMEM, 4);
1580                         irq = pci_read_config(dev, SK_PCI_INTLINE, 4);
1581
1582                         /* Reset the power state. */
1583                         printf("skc%d: chip is in D%d power mode "
1584                         "-- setting to D0\n", unit, command & SK_PSTATE_MASK);
1585                         command &= 0xFFFFFFFC;
1586                         pci_write_config(dev, SK_PCI_PWRMGMTCTRL, command, 4);
1587
1588                         /* Restore PCI config data. */
1589                         pci_write_config(dev, SK_PCI_LOIO, iobase, 4);
1590                         pci_write_config(dev, SK_PCI_LOMEM, membase, 4);
1591                         pci_write_config(dev, SK_PCI_INTLINE, irq, 4);
1592                 }
1593         }
1594
1595         /*
1596          * Map control/status registers.
1597          */
1598         command = pci_read_config(dev, PCIR_COMMAND, 4);
1599         command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
1600         pci_write_config(dev, PCIR_COMMAND, command, 4);
1601         command = pci_read_config(dev, PCIR_COMMAND, 4);
1602
1603 #ifdef SK_USEIOSPACE
1604         if (!(command & PCIM_CMD_PORTEN)) {
1605                 printf("skc%d: failed to enable I/O ports!\n", unit);
1606                 error = ENXIO;
1607                 goto fail;
1608         }
1609 #else
1610         if (!(command & PCIM_CMD_MEMEN)) {
1611                 printf("skc%d: failed to enable memory mapping!\n", unit);
1612                 error = ENXIO;
1613                 goto fail;
1614         }
1615 #endif
1616
1617         rid = SK_RID;
1618         sc->sk_res = bus_alloc_resource_any(dev, SK_RES, &rid, RF_ACTIVE);
1619
1620         if (sc->sk_res == NULL) {
1621                 printf("sk%d: couldn't map ports/memory\n", unit);
1622                 error = ENXIO;
1623                 goto fail;
1624         }
1625
1626         sc->sk_btag = rman_get_bustag(sc->sk_res);
1627         sc->sk_bhandle = rman_get_bushandle(sc->sk_res);
1628
1629         /* Allocate interrupt */
1630         rid = 0;
1631         sc->sk_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
1632             RF_SHAREABLE | RF_ACTIVE);
1633
1634         if (sc->sk_irq == NULL) {
1635                 printf("skc%d: couldn't map interrupt\n", unit);
1636                 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1637                 error = ENXIO;
1638                 goto fail;
1639         }
1640
1641         error = bus_setup_intr(dev, sc->sk_irq, INTR_TYPE_NET,
1642                                sk_intr, sc,
1643                                &sc->sk_intrhand, NULL);
1644
1645         if (error) {
1646                 printf("skc%d: couldn't set up irq\n", unit);
1647                 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1648                 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1649                 goto fail;
1650         }
1651
1652         /* Reset the adapter. */
1653         sk_reset(sc);
1654
1655         sc->sk_unit = unit;
1656
1657         /* Read and save vital product data from EEPROM. */
1658         sk_vpd_read(sc);
1659
1660         skrs = sk_win_read_1(sc, SK_EPROM0);
1661         if (sc->sk_type == SK_GENESIS) {
1662                 /* Read and save RAM size and RAMbuffer offset */
1663                 switch(skrs) {
1664                 case SK_RAMSIZE_512K_64:
1665                         sc->sk_ramsize = 0x80000;
1666                         sc->sk_rboff = SK_RBOFF_0;
1667                         break;
1668                 case SK_RAMSIZE_1024K_64:
1669                         sc->sk_ramsize = 0x100000;
1670                         sc->sk_rboff = SK_RBOFF_80000;
1671                         break;
1672                 case SK_RAMSIZE_1024K_128:
1673                         sc->sk_ramsize = 0x100000;
1674                         sc->sk_rboff = SK_RBOFF_0;
1675                         break;
1676                 case SK_RAMSIZE_2048K_128:
1677                         sc->sk_ramsize = 0x200000;
1678                         sc->sk_rboff = SK_RBOFF_0;
1679                         break;
1680                 default:
1681                         printf("skc%d: unknown ram size: %d\n",
1682                             sc->sk_unit, sk_win_read_1(sc, SK_EPROM0));
1683                         bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand);
1684                         bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1685                         bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1686                         error = ENXIO;
1687                         goto fail;
1688                         break;
1689                 }
1690         } else { /* SK_YUKON */
1691                 if (skrs == 0x00) {
1692                         sc->sk_ramsize = 0x20000;
1693                 } else {
1694                         sc->sk_ramsize = skrs * (1<<12);
1695                 }
1696                 sc->sk_rboff = SK_RBOFF_0;
1697         }
1698
1699         /* Read and save physical media type */
1700         switch(sk_win_read_1(sc, SK_PMDTYPE)) {
1701         case SK_PMD_1000BASESX:
1702                 sc->sk_pmd = IFM_1000_SX;
1703                 break;
1704         case SK_PMD_1000BASELX:
1705                 sc->sk_pmd = IFM_1000_LX;
1706                 break;
1707         case SK_PMD_1000BASECX:
1708                 sc->sk_pmd = IFM_1000_CX;
1709                 break;
1710         case SK_PMD_1000BASETX:
1711                 sc->sk_pmd = IFM_1000_T;
1712                 break;
1713         default:
1714                 printf("skc%d: unknown media type: 0x%x\n",
1715                     sc->sk_unit, sk_win_read_1(sc, SK_PMDTYPE));
1716                 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand);
1717                 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1718                 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1719                 error = ENXIO;
1720                 goto fail;
1721         }
1722
1723         /* Announce the product name. */
1724         printf("skc%d: %s\n", sc->sk_unit, sc->sk_vpd_prodname);
1725         sc->sk_devs[SK_PORT_A] = device_add_child(dev, "sk", -1);
1726         port = malloc(sizeof(int), M_DEVBUF, M_WAITOK);
1727         *port = SK_PORT_A;
1728         device_set_ivars(sc->sk_devs[SK_PORT_A], port);
1729
1730         if (!(sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC)) {
1731                 sc->sk_devs[SK_PORT_B] = device_add_child(dev, "sk", -1);
1732                 port = malloc(sizeof(int), M_DEVBUF, M_WAITOK);
1733                 *port = SK_PORT_B;
1734                 device_set_ivars(sc->sk_devs[SK_PORT_B], port);
1735         }
1736
1737         /* Turn on the 'driver is loaded' LED. */
1738         CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_ON);
1739
1740         bus_generic_attach(dev);
1741
1742 fail:
1743         splx(s);
1744         return(error);
1745 }
1746
1747 static int sk_detach(dev)
1748         device_t                dev;
1749 {
1750         struct sk_softc         *sc;
1751         struct sk_if_softc      *sc_if;
1752         struct ifnet            *ifp;
1753         int                     s;
1754
1755         s = splimp();
1756
1757         sc = device_get_softc(device_get_parent(dev));
1758         sc_if = device_get_softc(dev);
1759         ifp = &sc_if->arpcom.ac_if;
1760         sk_stop(sc_if);
1761         ether_ifdetach(ifp);
1762         bus_generic_detach(dev);
1763         if (sc_if->sk_miibus != NULL)
1764                 device_delete_child(dev, sc_if->sk_miibus);
1765         contigfree(sc_if->sk_cdata.sk_jumbo_buf, SK_JMEM, M_DEVBUF);
1766         contigfree(sc_if->sk_rdata, sizeof(struct sk_ring_data), M_DEVBUF);
1767
1768         splx(s);
1769
1770         return(0);
1771 }
1772
1773 static int skc_detach(dev)
1774         device_t                dev;
1775 {
1776         struct sk_softc         *sc;
1777         int                     s;
1778
1779         s = splimp();
1780
1781         sc = device_get_softc(dev);
1782
1783         bus_generic_detach(dev);
1784         if (sc->sk_devs[SK_PORT_A] != NULL)
1785                 device_delete_child(dev, sc->sk_devs[SK_PORT_A]);
1786         if (sc->sk_devs[SK_PORT_B] != NULL)
1787                 device_delete_child(dev, sc->sk_devs[SK_PORT_B]);
1788
1789         bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand);
1790         bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1791         bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1792
1793         splx(s);
1794
1795         return(0);
1796 }
1797
1798 static int sk_encap(sc_if, m_head, txidx)
1799         struct sk_if_softc      *sc_if;
1800         struct mbuf             *m_head;
1801         u_int32_t               *txidx;
1802 {
1803         struct sk_tx_desc       *f = NULL;
1804         struct mbuf             *m;
1805         u_int32_t               frag, cur, cnt = 0;
1806
1807         m = m_head;
1808         cur = frag = *txidx;
1809
1810         /*
1811          * Start packing the mbufs in this chain into
1812          * the fragment pointers. Stop when we run out
1813          * of fragments or hit the end of the mbuf chain.
1814          */
1815         for (m = m_head; m != NULL; m = m->m_next) {
1816                 if (m->m_len != 0) {
1817                         if ((SK_TX_RING_CNT -
1818                             (sc_if->sk_cdata.sk_tx_cnt + cnt)) < 2)
1819                                 return(ENOBUFS);
1820                         f = &sc_if->sk_rdata->sk_tx_ring[frag];
1821                         f->sk_data_lo = vtophys(mtod(m, vm_offset_t));
1822                         f->sk_ctl = m->m_len | SK_OPCODE_DEFAULT;
1823                         if (cnt == 0)
1824                                 f->sk_ctl |= SK_TXCTL_FIRSTFRAG;
1825                         else
1826                                 f->sk_ctl |= SK_TXCTL_OWN;
1827                         cur = frag;
1828                         SK_INC(frag, SK_TX_RING_CNT);
1829                         cnt++;
1830                 }
1831         }
1832
1833         if (m != NULL)
1834                 return(ENOBUFS);
1835
1836         sc_if->sk_rdata->sk_tx_ring[cur].sk_ctl |=
1837                 SK_TXCTL_LASTFRAG|SK_TXCTL_EOF_INTR;
1838         sc_if->sk_cdata.sk_tx_chain[cur].sk_mbuf = m_head;
1839         sc_if->sk_rdata->sk_tx_ring[*txidx].sk_ctl |= SK_TXCTL_OWN;
1840         sc_if->sk_cdata.sk_tx_cnt += cnt;
1841
1842         *txidx = frag;
1843
1844         return(0);
1845 }
1846
1847 static void sk_start(ifp)
1848         struct ifnet            *ifp;
1849 {
1850         struct sk_softc         *sc;
1851         struct sk_if_softc      *sc_if;
1852         struct mbuf             *m_head = NULL;
1853         u_int32_t               idx;
1854
1855         sc_if = ifp->if_softc;
1856         sc = sc_if->sk_softc;
1857
1858         idx = sc_if->sk_cdata.sk_tx_prod;
1859
1860         while(sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf == NULL) {
1861                 m_head = ifq_poll(&ifp->if_snd);
1862                 if (m_head == NULL)
1863                         break;
1864
1865                 /*
1866                  * Pack the data into the transmit ring. If we
1867                  * don't have room, set the OACTIVE flag and wait
1868                  * for the NIC to drain the ring.
1869                  */
1870                 if (sk_encap(sc_if, m_head, &idx)) {
1871                         ifp->if_flags |= IFF_OACTIVE;
1872                         break;
1873                 }
1874                 m_head = ifq_dequeue(&ifp->if_snd);
1875
1876                 BPF_MTAP(ifp, m_head);
1877         }
1878
1879         /* Transmit */
1880         sc_if->sk_cdata.sk_tx_prod = idx;
1881         CSR_WRITE_4(sc, sc_if->sk_tx_bmu, SK_TXBMU_TX_START);
1882
1883         /* Set a timeout in case the chip goes out to lunch. */
1884         ifp->if_timer = 5;
1885
1886         return;
1887 }
1888
1889
1890 static void sk_watchdog(ifp)
1891         struct ifnet            *ifp;
1892 {
1893         struct sk_if_softc      *sc_if;
1894
1895         sc_if = ifp->if_softc;
1896
1897         printf("sk%d: watchdog timeout\n", sc_if->sk_unit);
1898         sk_init(sc_if);
1899
1900         return;
1901 }
1902
1903 static void skc_shutdown(dev)
1904         device_t                dev;
1905 {
1906         struct sk_softc         *sc;
1907
1908         sc = device_get_softc(dev);
1909
1910         /* Turn off the 'driver is loaded' LED. */
1911         CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_OFF);
1912
1913         /*
1914          * Reset the GEnesis controller. Doing this should also
1915          * assert the resets on the attached XMAC(s).
1916          */
1917         sk_reset(sc);
1918
1919         return;
1920 }
1921
1922 static void sk_rxeof(sc_if)
1923         struct sk_if_softc      *sc_if;
1924 {
1925         struct mbuf             *m;
1926         struct ifnet            *ifp;
1927         struct sk_chain         *cur_rx;
1928         int                     total_len = 0;
1929         int                     i;
1930         u_int32_t               rxstat;
1931
1932         ifp = &sc_if->arpcom.ac_if;
1933         i = sc_if->sk_cdata.sk_rx_prod;
1934         cur_rx = &sc_if->sk_cdata.sk_rx_chain[i];
1935
1936         while(!(sc_if->sk_rdata->sk_rx_ring[i].sk_ctl & SK_RXCTL_OWN)) {
1937
1938                 cur_rx = &sc_if->sk_cdata.sk_rx_chain[i];
1939                 rxstat = sc_if->sk_rdata->sk_rx_ring[i].sk_xmac_rxstat;
1940                 m = cur_rx->sk_mbuf;
1941                 cur_rx->sk_mbuf = NULL;
1942                 total_len = SK_RXBYTES(sc_if->sk_rdata->sk_rx_ring[i].sk_ctl);
1943                 SK_INC(i, SK_RX_RING_CNT);
1944
1945                 if (rxstat & XM_RXSTAT_ERRFRAME) {
1946                         ifp->if_ierrors++;
1947                         sk_newbuf(sc_if, cur_rx, m);
1948                         continue;
1949                 }
1950
1951                 /*
1952                  * Try to allocate a new jumbo buffer. If that
1953                  * fails, copy the packet to mbufs and put the
1954                  * jumbo buffer back in the ring so it can be
1955                  * re-used. If allocating mbufs fails, then we
1956                  * have to drop the packet.
1957                  */
1958                 if (sk_newbuf(sc_if, cur_rx, NULL) == ENOBUFS) {
1959                         struct mbuf             *m0;
1960                         m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
1961                             total_len + ETHER_ALIGN, 0, ifp, NULL);
1962                         sk_newbuf(sc_if, cur_rx, m);
1963                         if (m0 == NULL) {
1964                                 printf("sk%d: no receive buffers "
1965                                     "available -- packet dropped!\n",
1966                                     sc_if->sk_unit);
1967                                 ifp->if_ierrors++;
1968                                 continue;
1969                         }
1970                         m_adj(m0, ETHER_ALIGN);
1971                         m = m0;
1972                 } else {
1973                         m->m_pkthdr.rcvif = ifp;
1974                         m->m_pkthdr.len = m->m_len = total_len;
1975                 }
1976
1977                 ifp->if_ipackets++;
1978                 (*ifp->if_input)(ifp, m);
1979         }
1980
1981         sc_if->sk_cdata.sk_rx_prod = i;
1982
1983         return;
1984 }
1985
1986 static void sk_txeof(sc_if)
1987         struct sk_if_softc      *sc_if;
1988 {
1989         struct sk_tx_desc       *cur_tx = NULL;
1990         struct ifnet            *ifp;
1991         u_int32_t               idx;
1992
1993         ifp = &sc_if->arpcom.ac_if;
1994
1995         /*
1996          * Go through our tx ring and free mbufs for those
1997          * frames that have been sent.
1998          */
1999         idx = sc_if->sk_cdata.sk_tx_cons;
2000         while(idx != sc_if->sk_cdata.sk_tx_prod) {
2001                 cur_tx = &sc_if->sk_rdata->sk_tx_ring[idx];
2002                 if (cur_tx->sk_ctl & SK_TXCTL_OWN)
2003                         break;
2004                 if (cur_tx->sk_ctl & SK_TXCTL_LASTFRAG)
2005                         ifp->if_opackets++;
2006                 if (sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf != NULL) {
2007                         m_freem(sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf);
2008                         sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf = NULL;
2009                 }
2010                 sc_if->sk_cdata.sk_tx_cnt--;
2011                 SK_INC(idx, SK_TX_RING_CNT);
2012                 ifp->if_timer = 0;
2013         }
2014
2015         sc_if->sk_cdata.sk_tx_cons = idx;
2016
2017         if (cur_tx != NULL)
2018                 ifp->if_flags &= ~IFF_OACTIVE;
2019
2020         return;
2021 }
2022
2023 static void sk_tick(xsc_if)
2024         void                    *xsc_if;
2025 {
2026         struct sk_if_softc      *sc_if;
2027         struct mii_data         *mii;
2028         struct ifnet            *ifp;
2029         int                     i;
2030
2031         sc_if = xsc_if;
2032         ifp = &sc_if->arpcom.ac_if;
2033         mii = device_get_softc(sc_if->sk_miibus);
2034
2035         if (!(ifp->if_flags & IFF_UP))
2036                 return;
2037
2038         if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) {
2039                 sk_intr_bcom(sc_if);
2040                 return;
2041         }
2042
2043         /*
2044          * According to SysKonnect, the correct way to verify that
2045          * the link has come back up is to poll bit 0 of the GPIO
2046          * register three times. This pin has the signal from the
2047          * link_sync pin connected to it; if we read the same link
2048          * state 3 times in a row, we know the link is up.
2049          */
2050         for (i = 0; i < 3; i++) {
2051                 if (SK_XM_READ_2(sc_if, XM_GPIO) & XM_GPIO_GP0_SET)
2052                         break;
2053         }
2054
2055         if (i != 3) {
2056                 callout_reset(&sc_if->sk_tick_timer, hz, sk_tick, sc_if);
2057                 return;
2058         }
2059
2060         /* Turn the GP0 interrupt back on. */
2061         SK_XM_CLRBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET);
2062         SK_XM_READ_2(sc_if, XM_ISR);
2063         mii_tick(mii);
2064         mii_pollstat(mii);
2065         callout_stop(&sc_if->sk_tick_timer);
2066
2067         return;
2068 }
2069
2070 static void sk_intr_bcom(sc_if)
2071         struct sk_if_softc      *sc_if;
2072 {
2073         struct sk_softc         *sc;
2074         struct mii_data         *mii;
2075         struct ifnet            *ifp;
2076         int                     status;
2077
2078         sc = sc_if->sk_softc;
2079         mii = device_get_softc(sc_if->sk_miibus);
2080         ifp = &sc_if->arpcom.ac_if;
2081
2082         SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB);
2083
2084         /*
2085          * Read the PHY interrupt register to make sure
2086          * we clear any pending interrupts.
2087          */
2088         status = sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM, BRGPHY_MII_ISR);
2089
2090         if (!(ifp->if_flags & IFF_RUNNING)) {
2091                 sk_init_xmac(sc_if);
2092                 return;
2093         }
2094
2095         if (status & (BRGPHY_ISR_LNK_CHG|BRGPHY_ISR_AN_PR)) {
2096                 int                     lstat;
2097                 lstat = sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM,
2098                     BRGPHY_MII_AUXSTS);
2099
2100                 if (!(lstat & BRGPHY_AUXSTS_LINK) && sc_if->sk_link) {
2101                         mii_mediachg(mii);
2102                         /* Turn off the link LED. */
2103                         SK_IF_WRITE_1(sc_if, 0,
2104                             SK_LINKLED1_CTL, SK_LINKLED_OFF);
2105                         sc_if->sk_link = 0;
2106                 } else if (status & BRGPHY_ISR_LNK_CHG) {
2107                         sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2108                             BRGPHY_MII_IMR, 0xFF00);
2109                         mii_tick(mii);
2110                         sc_if->sk_link = 1;
2111                         /* Turn on the link LED. */
2112                         SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL,
2113                             SK_LINKLED_ON|SK_LINKLED_LINKSYNC_OFF|
2114                             SK_LINKLED_BLINK_OFF);
2115                         mii_pollstat(mii);
2116                 } else {
2117                         mii_tick(mii);
2118                         callout_reset(&sc_if->sk_tick_timer, hz,
2119                                       sk_tick, sc_if);
2120                 }
2121         }
2122
2123         SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB);
2124
2125         return;
2126 }
2127
2128 static void sk_intr_xmac(sc_if)
2129         struct sk_if_softc      *sc_if;
2130 {
2131         struct sk_softc         *sc;
2132         u_int16_t               status;
2133         struct mii_data         *mii;
2134
2135         sc = sc_if->sk_softc;
2136         mii = device_get_softc(sc_if->sk_miibus);
2137         status = SK_XM_READ_2(sc_if, XM_ISR);
2138
2139         /*
2140          * Link has gone down. Start MII tick timeout to
2141          * watch for link resync.
2142          */
2143         if (sc_if->sk_phytype == SK_PHYTYPE_XMAC) {
2144                 if (status & XM_ISR_GP0_SET) {
2145                         SK_XM_SETBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET);
2146                         callout_reset(&sc_if->sk_tick_timer, hz,
2147                                       sk_tick, sc_if);
2148                 }
2149
2150                 if (status & XM_ISR_AUTONEG_DONE) {
2151                         callout_reset(&sc_if->sk_tick_timer, hz,
2152                                       sk_tick, sc_if);
2153                 }
2154         }
2155
2156         if (status & XM_IMR_TX_UNDERRUN)
2157                 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_TXFIFO);
2158
2159         if (status & XM_IMR_RX_OVERRUN)
2160                 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_RXFIFO);
2161
2162         status = SK_XM_READ_2(sc_if, XM_ISR);
2163
2164         return;
2165 }
2166
2167 static void sk_intr_yukon(sc_if)
2168         struct sk_if_softc      *sc_if;
2169 {
2170         int status;
2171
2172         status = SK_IF_READ_2(sc_if, 0, SK_GMAC_ISR);
2173
2174         return;
2175 }
2176
2177 static void sk_intr(xsc)
2178         void                    *xsc;
2179 {
2180         struct sk_softc         *sc = xsc;
2181         struct sk_if_softc      *sc_if0 = NULL, *sc_if1 = NULL;
2182         struct ifnet            *ifp0 = NULL, *ifp1 = NULL;
2183         u_int32_t               status;
2184
2185         sc_if0 = sc->sk_if[SK_PORT_A];
2186         sc_if1 = sc->sk_if[SK_PORT_B];
2187
2188         if (sc_if0 != NULL)
2189                 ifp0 = &sc_if0->arpcom.ac_if;
2190         if (sc_if1 != NULL)
2191                 ifp1 = &sc_if1->arpcom.ac_if;
2192
2193         for (;;) {
2194                 status = CSR_READ_4(sc, SK_ISSR);
2195                 if (!(status & sc->sk_intrmask))
2196                         break;
2197
2198                 /* Handle receive interrupts first. */
2199                 if (status & SK_ISR_RX1_EOF) {
2200                         sk_rxeof(sc_if0);
2201                         CSR_WRITE_4(sc, SK_BMU_RX_CSR0,
2202                             SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START);
2203                 }
2204                 if (status & SK_ISR_RX2_EOF) {
2205                         sk_rxeof(sc_if1);
2206                         CSR_WRITE_4(sc, SK_BMU_RX_CSR1,
2207                             SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START);
2208                 }
2209
2210                 /* Then transmit interrupts. */
2211                 if (status & SK_ISR_TX1_S_EOF) {
2212                         sk_txeof(sc_if0);
2213                         CSR_WRITE_4(sc, SK_BMU_TXS_CSR0,
2214                             SK_TXBMU_CLR_IRQ_EOF);
2215                 }
2216                 if (status & SK_ISR_TX2_S_EOF) {
2217                         sk_txeof(sc_if1);
2218                         CSR_WRITE_4(sc, SK_BMU_TXS_CSR1,
2219                             SK_TXBMU_CLR_IRQ_EOF);
2220                 }
2221
2222                 /* Then MAC interrupts. */
2223                 if (status & SK_ISR_MAC1 && ifp0->if_flags & IFF_RUNNING) {
2224                         if (sc->sk_type == SK_GENESIS)
2225                                 sk_intr_xmac(sc_if0);
2226                         else
2227                                 sk_intr_yukon(sc_if0);
2228                 }
2229
2230                 if (status & SK_ISR_MAC2 && ifp1->if_flags & IFF_RUNNING) {
2231                         if (sc->sk_type == SK_GENESIS)
2232                                 sk_intr_xmac(sc_if1);
2233                         else
2234                                 sk_intr_yukon(sc_if0);
2235                 }
2236
2237                 if (status & SK_ISR_EXTERNAL_REG) {
2238                         if (ifp0 != NULL &&
2239                             sc_if0->sk_phytype == SK_PHYTYPE_BCOM)
2240                                 sk_intr_bcom(sc_if0);
2241                         if (ifp1 != NULL &&
2242                             sc_if1->sk_phytype == SK_PHYTYPE_BCOM)
2243                                 sk_intr_bcom(sc_if1);
2244                 }
2245         }
2246
2247         CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
2248
2249         if (ifp0 != NULL && !ifq_is_empty(&ifp0->if_snd))
2250                 sk_start(ifp0);
2251         if (ifp1 != NULL && !ifq_is_empty(&ifp0->if_snd))
2252                 sk_start(ifp1);
2253
2254         return;
2255 }
2256
2257 static void sk_init_xmac(sc_if)
2258         struct sk_if_softc      *sc_if;
2259 {
2260         struct sk_softc         *sc;
2261         struct ifnet            *ifp;
2262         struct sk_bcom_hack     bhack[] = {
2263         { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 },
2264         { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 },
2265         { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 },
2266         { 0, 0 } };
2267
2268         sc = sc_if->sk_softc;
2269         ifp = &sc_if->arpcom.ac_if;
2270
2271         /* Unreset the XMAC. */
2272         SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_UNRESET);
2273         DELAY(1000);
2274
2275         /* Reset the XMAC's internal state. */
2276         SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC);
2277
2278         /* Save the XMAC II revision */
2279         sc_if->sk_xmac_rev = XM_XMAC_REV(SK_XM_READ_4(sc_if, XM_DEVID));
2280
2281         /*
2282          * Perform additional initialization for external PHYs,
2283          * namely for the 1000baseTX cards that use the XMAC's
2284          * GMII mode.
2285          */
2286         if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) {
2287                 int                     i = 0;
2288                 u_int32_t               val;
2289
2290                 /* Take PHY out of reset. */
2291                 val = sk_win_read_4(sc, SK_GPIO);
2292                 if (sc_if->sk_port == SK_PORT_A)
2293                         val |= SK_GPIO_DIR0|SK_GPIO_DAT0;
2294                 else
2295                         val |= SK_GPIO_DIR2|SK_GPIO_DAT2;
2296                 sk_win_write_4(sc, SK_GPIO, val);
2297
2298                 /* Enable GMII mode on the XMAC. */
2299                 SK_XM_SETBIT_2(sc_if, XM_HWCFG, XM_HWCFG_GMIIMODE);
2300
2301                 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2302                     BRGPHY_MII_BMCR, BRGPHY_BMCR_RESET);
2303                 DELAY(10000);
2304                 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2305                     BRGPHY_MII_IMR, 0xFFF0);
2306
2307                 /*
2308                  * Early versions of the BCM5400 apparently have
2309                  * a bug that requires them to have their reserved
2310                  * registers initialized to some magic values. I don't
2311                  * know what the numbers do, I'm just the messenger.
2312                  */
2313                 if (sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM, 0x03)
2314                     == 0x6041) {
2315                         while(bhack[i].reg) {
2316                                 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2317                                     bhack[i].reg, bhack[i].val);
2318                                 i++;
2319                         }
2320                 }
2321         }
2322
2323         /* Set station address */
2324         SK_XM_WRITE_2(sc_if, XM_PAR0,
2325             *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[0]));
2326         SK_XM_WRITE_2(sc_if, XM_PAR1,
2327             *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[2]));
2328         SK_XM_WRITE_2(sc_if, XM_PAR2,
2329             *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[4]));
2330         SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_STATION);
2331
2332         if (ifp->if_flags & IFF_BROADCAST) {
2333                 SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD);
2334         } else {
2335                 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD);
2336         }
2337
2338         /* We don't need the FCS appended to the packet. */
2339         SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_STRIPFCS);
2340
2341         /* We want short frames padded to 60 bytes. */
2342         SK_XM_SETBIT_2(sc_if, XM_TXCMD, XM_TXCMD_AUTOPAD);
2343
2344         /*
2345          * Enable the reception of all error frames. This is is
2346          * a necessary evil due to the design of the XMAC. The
2347          * XMAC's receive FIFO is only 8K in size, however jumbo
2348          * frames can be up to 9000 bytes in length. When bad
2349          * frame filtering is enabled, the XMAC's RX FIFO operates
2350          * in 'store and forward' mode. For this to work, the
2351          * entire frame has to fit into the FIFO, but that means
2352          * that jumbo frames larger than 8192 bytes will be
2353          * truncated. Disabling all bad frame filtering causes
2354          * the RX FIFO to operate in streaming mode, in which
2355          * case the XMAC will start transfering frames out of the
2356          * RX FIFO as soon as the FIFO threshold is reached.
2357          */
2358         SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_BADFRAMES|
2359             XM_MODE_RX_GIANTS|XM_MODE_RX_RUNTS|XM_MODE_RX_CRCERRS|
2360             XM_MODE_RX_INRANGELEN);
2361
2362         if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN))
2363                 SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK);
2364         else
2365                 SK_XM_CLRBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK);
2366
2367         /*
2368          * Bump up the transmit threshold. This helps hold off transmit
2369          * underruns when we're blasting traffic from both ports at once.
2370          */
2371         SK_XM_WRITE_2(sc_if, XM_TX_REQTHRESH, SK_XM_TX_FIFOTHRESH);
2372
2373         /* Set promiscuous mode */
2374         sk_setpromisc(sc_if);
2375
2376         /* Set multicast filter */
2377         sk_setmulti(sc_if);
2378
2379         /* Clear and enable interrupts */
2380         SK_XM_READ_2(sc_if, XM_ISR);
2381         if (sc_if->sk_phytype == SK_PHYTYPE_XMAC)
2382                 SK_XM_WRITE_2(sc_if, XM_IMR, XM_INTRS);
2383         else
2384                 SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF);
2385
2386         /* Configure MAC arbiter */
2387         switch(sc_if->sk_xmac_rev) {
2388         case XM_XMAC_REV_B2:
2389                 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_B2);
2390                 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_B2);
2391                 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_B2);
2392                 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_B2);
2393                 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_B2);
2394                 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_B2);
2395                 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_B2);
2396                 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_B2);
2397                 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2);
2398                 break;
2399         case XM_XMAC_REV_C1:
2400                 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_C1);
2401                 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_C1);
2402                 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_C1);
2403                 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_C1);
2404                 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_C1);
2405                 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_C1);
2406                 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_C1);
2407                 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_C1);
2408                 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2);
2409                 break;
2410         default:
2411                 break;
2412         }
2413         sk_win_write_2(sc, SK_MACARB_CTL,
2414             SK_MACARBCTL_UNRESET|SK_MACARBCTL_FASTOE_OFF);
2415
2416         sc_if->sk_link = 1;
2417
2418         return;
2419 }
2420
2421 static void sk_init_yukon(sc_if)
2422         struct sk_if_softc      *sc_if;
2423 {
2424         u_int32_t               phy;
2425         u_int16_t               reg;
2426         struct sk_softc         *sc;
2427         struct ifnet            *ifp;
2428         int                     i;
2429
2430         sc = sc_if->sk_softc;
2431         ifp = &sc_if->arpcom.ac_if;
2432
2433         /* GMAC and GPHY Reset */
2434         SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_SET);
2435         SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET);
2436         DELAY(1000);
2437         SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_CLEAR);
2438         SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET);
2439         DELAY(1000);
2440
2441         phy = SK_GPHY_INT_POL_HI | SK_GPHY_DIS_FC | SK_GPHY_DIS_SLEEP |
2442                 SK_GPHY_ENA_XC | SK_GPHY_ANEG_ALL | SK_GPHY_ENA_PAUSE;
2443
2444         switch(sc_if->sk_softc->sk_pmd) {
2445         case IFM_1000_SX:
2446         case IFM_1000_LX:
2447                 phy |= SK_GPHY_FIBER;
2448                 break;
2449
2450         case IFM_1000_CX:
2451         case IFM_1000_T:
2452                 phy |= SK_GPHY_COPPER;
2453                 break;
2454         }
2455
2456         SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, phy | SK_GPHY_RESET_SET);
2457         DELAY(1000);
2458         SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, phy | SK_GPHY_RESET_CLEAR);
2459         SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_LOOP_OFF |
2460                       SK_GMAC_PAUSE_ON | SK_GMAC_RESET_CLEAR);
2461
2462         /* unused read of the interrupt source register */
2463         SK_IF_READ_2(sc_if, 0, SK_GMAC_ISR);
2464
2465         reg = SK_YU_READ_2(sc_if, YUKON_PAR);
2466
2467         /* MIB Counter Clear Mode set */
2468         reg |= YU_PAR_MIB_CLR;
2469         SK_YU_WRITE_2(sc_if, YUKON_PAR, reg);
2470
2471         /* MIB Counter Clear Mode clear */
2472         reg &= ~YU_PAR_MIB_CLR;
2473         SK_YU_WRITE_2(sc_if, YUKON_PAR, reg);
2474
2475         /* receive control reg */
2476         SK_YU_WRITE_2(sc_if, YUKON_RCR, YU_RCR_CRCR);
2477
2478         /* transmit parameter register */
2479         SK_YU_WRITE_2(sc_if, YUKON_TPR, YU_TPR_JAM_LEN(0x3) |
2480                       YU_TPR_JAM_IPG(0xb) | YU_TPR_JAM2DATA_IPG(0x1a) );
2481
2482         /* serial mode register */
2483         reg = YU_SMR_DATA_BLIND(0x1c) | YU_SMR_MFL_VLAN | YU_SMR_IPG_DATA(0x1e);
2484         if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN))
2485                 reg |= YU_SMR_MFL_JUMBO;
2486         SK_YU_WRITE_2(sc_if, YUKON_SMR, reg);
2487
2488         /* Setup Yukon's address */
2489         for (i = 0; i < 3; i++) {
2490                 /* Write Source Address 1 (unicast filter) */
2491                 SK_YU_WRITE_2(sc_if, YUKON_SAL1 + i * 4, 
2492                               sc_if->arpcom.ac_enaddr[i * 2] |
2493                               sc_if->arpcom.ac_enaddr[i * 2 + 1] << 8);
2494         }
2495
2496         for (i = 0; i < 3; i++) {
2497                 reg = sk_win_read_2(sc_if->sk_softc,
2498                                     SK_MAC1_0 + i * 2 + sc_if->sk_port * 8);
2499                 SK_YU_WRITE_2(sc_if, YUKON_SAL2 + i * 4, reg);
2500         }
2501
2502         /* Set promiscuous mode */
2503         sk_setpromisc(sc_if);
2504
2505         /* Set multicast filter */
2506         sk_setmulti(sc_if);
2507
2508         /* enable interrupt mask for counter overflows */
2509         SK_YU_WRITE_2(sc_if, YUKON_TIMR, 0);
2510         SK_YU_WRITE_2(sc_if, YUKON_RIMR, 0);
2511         SK_YU_WRITE_2(sc_if, YUKON_TRIMR, 0);
2512
2513         /* Configure RX MAC FIFO */
2514         SK_IF_WRITE_1(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_CLEAR);
2515         SK_IF_WRITE_4(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_OPERATION_ON);
2516
2517         /* Configure TX MAC FIFO */
2518         SK_IF_WRITE_1(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_CLEAR);
2519         SK_IF_WRITE_4(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_OPERATION_ON);
2520 }
2521
2522 /*
2523  * Note that to properly initialize any part of the GEnesis chip,
2524  * you first have to take it out of reset mode.
2525  */
2526 static void sk_init(xsc)
2527         void                    *xsc;
2528 {
2529         struct sk_if_softc      *sc_if = xsc;
2530         struct sk_softc         *sc;
2531         struct ifnet            *ifp;
2532         struct mii_data         *mii;
2533         int                     s;
2534         u_int16_t               reg;
2535
2536         s = splimp();
2537
2538         ifp = &sc_if->arpcom.ac_if;
2539         sc = sc_if->sk_softc;
2540         mii = device_get_softc(sc_if->sk_miibus);
2541
2542         /* Cancel pending I/O and free all RX/TX buffers. */
2543         sk_stop(sc_if);
2544
2545         if (sc->sk_type == SK_GENESIS) {
2546                 /* Configure LINK_SYNC LED */
2547                 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_ON);
2548                 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL,
2549                         SK_LINKLED_LINKSYNC_ON);
2550
2551                 /* Configure RX LED */
2552                 SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL,  
2553                         SK_RXLEDCTL_COUNTER_START);
2554
2555                 /* Configure TX LED */
2556                 SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL,
2557                         SK_TXLEDCTL_COUNTER_START);
2558         }
2559
2560         /* Configure I2C registers */
2561
2562         /* Configure XMAC(s) */
2563         switch (sc->sk_type) {
2564         case SK_GENESIS:
2565                 sk_init_xmac(sc_if);
2566                 break;
2567         case SK_YUKON:
2568                 sk_init_yukon(sc_if);
2569                 break;
2570         }
2571         mii_mediachg(mii);
2572
2573         if (sc->sk_type == SK_GENESIS) {
2574                 /* Configure MAC FIFOs */
2575                 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_UNRESET);
2576                 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_END, SK_FIFO_END);
2577                 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_ON);
2578
2579                 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_UNRESET);
2580                 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_END, SK_FIFO_END);
2581                 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_ON);
2582         }
2583
2584         /* Configure transmit arbiter(s) */
2585         SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL,
2586             SK_TXARCTL_ON|SK_TXARCTL_FSYNC_ON);
2587
2588         /* Configure RAMbuffers */
2589         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_UNRESET);
2590         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_START, sc_if->sk_rx_ramstart);
2591         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_WR_PTR, sc_if->sk_rx_ramstart);
2592         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_RD_PTR, sc_if->sk_rx_ramstart);
2593         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_END, sc_if->sk_rx_ramend);
2594         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_ON);
2595
2596         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_UNRESET);
2597         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_STORENFWD_ON);
2598         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_START, sc_if->sk_tx_ramstart);
2599         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_WR_PTR, sc_if->sk_tx_ramstart);
2600         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_RD_PTR, sc_if->sk_tx_ramstart);
2601         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_END, sc_if->sk_tx_ramend);
2602         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_ON);
2603
2604         /* Configure BMUs */
2605         SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_ONLINE);
2606         SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_LO,
2607             vtophys(&sc_if->sk_rdata->sk_rx_ring[0]));
2608         SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_HI, 0);
2609
2610         SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_ONLINE);
2611         SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_LO,
2612             vtophys(&sc_if->sk_rdata->sk_tx_ring[0]));
2613         SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_HI, 0);
2614
2615         /* Init descriptors */
2616         if (sk_init_rx_ring(sc_if) == ENOBUFS) {
2617                 printf("sk%d: initialization failed: no "
2618                     "memory for rx buffers\n", sc_if->sk_unit);
2619                 sk_stop(sc_if);
2620                 (void)splx(s);
2621                 return;
2622         }
2623         sk_init_tx_ring(sc_if);
2624
2625         /* Configure interrupt handling */
2626         CSR_READ_4(sc, SK_ISSR);
2627         if (sc_if->sk_port == SK_PORT_A)
2628                 sc->sk_intrmask |= SK_INTRS1;
2629         else
2630                 sc->sk_intrmask |= SK_INTRS2;
2631
2632         sc->sk_intrmask |= SK_ISR_EXTERNAL_REG;
2633
2634         CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
2635
2636         /* Start BMUs. */
2637         SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_RX_START);
2638
2639         switch(sc->sk_type) {
2640         case SK_GENESIS:
2641                 /* Enable XMACs TX and RX state machines */
2642                 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_IGNPAUSE);
2643                 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB);
2644                 break;
2645         case SK_YUKON:
2646                 reg = SK_YU_READ_2(sc_if, YUKON_GPCR);
2647                 reg |= YU_GPCR_TXEN | YU_GPCR_RXEN;
2648                 reg &= ~(YU_GPCR_SPEED_EN | YU_GPCR_DPLX_EN);
2649                 SK_YU_WRITE_2(sc_if, YUKON_GPCR, reg);
2650         }
2651
2652         ifp->if_flags |= IFF_RUNNING;
2653         ifp->if_flags &= ~IFF_OACTIVE;
2654
2655         splx(s);
2656
2657         return;
2658 }
2659
2660 static void sk_stop(sc_if)
2661         struct sk_if_softc      *sc_if;
2662 {
2663         int                     i;
2664         struct sk_softc         *sc;
2665         struct ifnet            *ifp;
2666
2667         sc = sc_if->sk_softc;
2668         ifp = &sc_if->arpcom.ac_if;
2669
2670         callout_stop(&sc_if->sk_tick_timer);
2671
2672         if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) {
2673                 u_int32_t               val;
2674
2675                 /* Put PHY back into reset. */
2676                 val = sk_win_read_4(sc, SK_GPIO);
2677                 if (sc_if->sk_port == SK_PORT_A) {
2678                         val |= SK_GPIO_DIR0;
2679                         val &= ~SK_GPIO_DAT0;
2680                 } else {
2681                         val |= SK_GPIO_DIR2;
2682                         val &= ~SK_GPIO_DAT2;
2683                 }
2684                 sk_win_write_4(sc, SK_GPIO, val);
2685         }
2686
2687         /* Turn off various components of this interface. */
2688         SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC);
2689         switch (sc->sk_type) {
2690         case SK_GENESIS:
2691                 SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_RESET);
2692                 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_RESET);
2693                 break;
2694         case SK_YUKON:
2695                 SK_IF_WRITE_1(sc_if,0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_SET);
2696                 SK_IF_WRITE_1(sc_if,0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_SET);
2697                 break;
2698         }
2699         SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_OFFLINE);
2700         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF);
2701         SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_OFFLINE);
2702         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF);
2703         SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, SK_TXARCTL_OFF);
2704         SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP);
2705         SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP);
2706         SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_OFF);
2707         SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_OFF);
2708
2709         /* Disable interrupts */
2710         if (sc_if->sk_port == SK_PORT_A)
2711                 sc->sk_intrmask &= ~SK_INTRS1;
2712         else
2713                 sc->sk_intrmask &= ~SK_INTRS2;
2714         CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
2715
2716         SK_XM_READ_2(sc_if, XM_ISR);
2717         SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF);
2718
2719         /* Free RX and TX mbufs still in the queues. */
2720         for (i = 0; i < SK_RX_RING_CNT; i++) {
2721                 if (sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf != NULL) {
2722                         m_freem(sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf);
2723                         sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf = NULL;
2724                 }
2725         }
2726
2727         for (i = 0; i < SK_TX_RING_CNT; i++) {
2728                 if (sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf != NULL) {
2729                         m_freem(sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf);
2730                         sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf = NULL;
2731                 }
2732         }
2733
2734         ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
2735
2736         return;
2737 }