1 # DragonFly BSD Tinderbox Configuration File
3 # If you would like a particular option tested by the Tinderbox system
4 # at: http://ps.catpa.com/, please add it into this file.
6 # Feel free to add your *test*/*debug* options into this configuration
7 # file. Logs will be available for this configuration at:
9 # http://ps.catpa.com/tinderbox/
11 # Tinderbox maintained by: Hiten Pandya (hmp@nxad.com)
13 # $DragonFly: src/sys/config/Attic/TINDERBOX,v 1.6 2003/09/26 19:23:35 dillon Exp $
23 # ADD TEST OPTIONS HERE
26 options INVARIANT_SUPPORT
29 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
31 options MATH_EMULATE #Support for x87 emulation
32 options INET #InterNETworking
33 options INET6 #IPv6 communications protocols
34 options FFS #Berkeley Fast Filesystem
35 options FFS_ROOT #FFS usable as root device [keep this!]
36 options SOFTUPDATES #Enable FFS soft updates support
37 options UFS_DIRHASH #Improve performance on big directories
38 options MFS #Memory Filesystem
39 options MD_ROOT #MD is a potential root device
40 options NFS #Network Filesystem
41 options NFS_ROOT #NFS usable as root device, NFS required
42 options MSDOSFS #MSDOS Filesystem
43 options CD9660 #ISO 9660 Filesystem
44 options CD9660_ROOT #CD-ROM usable as root, CD9660 required
45 options PROCFS #Process filesystem
46 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
47 options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
48 options UCONSOLE #Allow users to grab the console
49 options USERCONFIG #boot -c editor
50 options VISUAL_USERCONFIG #visual boot -c editor
51 options KTRACE #ktrace(1) support
52 options SYSVSHM #SYSV-style shared memory
53 options SYSVMSG #SYSV-style message queues
54 options SYSVSEM #SYSV-style semaphores
55 options P1003_1B #Posix P1003_1B real-time extensions
56 options _KPOSIX_PRIORITY_SCHEDULING
57 options ICMP_BANDLIM #Rate limit bad replies
58 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
60 # To make an SMP kernel, the next two are needed
61 #options SMP # Symmetric MultiProcessor Kernel
62 #options APIC_IO # Symmetric (APIC) I/O
64 # To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
65 #options HTT # HyperThreading Technology
72 device fdc0 at isa? port IO_FD1 irq 6 drq 2
73 device fd0 at fdc0 drive 0
74 device fd1 at fdc0 drive 1
76 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
77 # don't use the above line for fdc0 but the following one:
80 # ATA and ATAPI devices
81 device ata0 at isa? port IO_WD1 irq 14
82 device ata1 at isa? port IO_WD2 irq 15
84 device atadisk # ATA disk drives
85 device atapicd # ATAPI CDROM drives
86 device atapifd # ATAPI floppy drives
87 device atapist # ATAPI tape drives
88 options ATA_STATIC_ID #Static device numbering
91 device ahb # EISA AHA1742 family
92 device ahc # AHA2940 and onboard AIC7xxx devices
93 device ahd # AHA39320/29320 and onboard AIC79xx devices
94 device amd # AMD 53C974 (Tekram DC-390(T))
95 device isp # Qlogic family
96 device mpt # LSI-Logic MPT/Fusion
97 device ncr # NCR/Symbios Logic
98 device sym # NCR/Symbios Logic (newer chipsets)
99 options SYM_SETUP_LP_PROBE_MAP=0x40
100 # Allow ncr to attach legacy NCR devices when
101 # both sym and ncr are configured
109 device ncv # NCR 53C500
110 device nsp # Workbit Ninja SCSI-3
111 device stg # TMC 18C30/18C50
114 device scbus # SCSI bus (required)
115 device da # Direct Access (disks)
116 device sa # Sequential Access (tape etc)
118 device pass # Passthrough device (direct SCSI access)
120 # RAID controllers interfaced to the SCSI subsystem
121 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
122 device dpt # DPT Smartcache - See LINT for options!
123 device iir # Intel Integrated RAID
124 device mly # Mylex AcceleRAID/eXtremeRAID
125 device ciss # Compaq SmartRAID 5* series
128 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
129 #device aacp # SCSI passthrough for aac (requires CAM)
130 device ida # Compaq Smart RAID
131 device amr # AMI MegaRAID
132 device mlx # Mylex DAC960 family
133 device twe # 3ware Escalade
135 # atkbdc0 controls both the keyboard and the PS/2 mouse
136 device atkbdc0 at isa? port IO_KBD
137 device atkbd0 at atkbdc? irq 1 flags 0x1
138 device psm0 at atkbdc? irq 12
142 # splash screen/screen saver
145 # syscons is the default console driver, resembling an SCO console
146 device sc0 at isa? flags 0x100
148 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
150 #options XSERVER # support for X server on a vt console
151 #options FAT_CURSOR # start with block cursor
152 # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
153 #options PCVT_SCANSET=2 # IBM keyboards are non-std
155 device agp # support several AGP chipsets
157 # Floating point support - do not disable.
158 device npx0 at nexus? port IO_NPX irq 13
160 # Power management support (see LINT for more options)
161 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
163 # PCCARD (PCMCIA) support
165 device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
166 device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
169 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
170 device sio1 at isa? port IO_COM2 irq 3
171 device sio2 at isa? disable port IO_COM3 irq 5
172 device sio3 at isa? disable port IO_COM4 irq 9
175 device ppc0 at isa? irq 7
176 device ppbus # Parallel port bus (required)
178 device plip # TCP/IP over parallel
179 device ppi # Parallel port interface device
180 #device vpo # Requires scbus and da
184 device de # DEC/Intel DC21x4x (``Tulip'')
185 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
186 device txp # 3Com 3cR990 (``Typhoon'')
187 device vx # 3Com 3c590, 3c595 (``Vortex'')
189 # PCI Ethernet NICs that use the common MII bus controller code.
190 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
191 device miibus # MII bus support
192 device dc # DEC/Intel 21143 and various workalikes
193 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
194 device pcn # AMD Am79C97x PCI 10/100 NICs
195 device rl # RealTek 8129/8139
196 device sf # Adaptec AIC-6915 (``Starfire'')
197 device sis # Silicon Integrated Systems SiS 900/SiS 7016
198 device ste # Sundance ST201 (D-Link DFE-550TX)
199 device tl # Texas Instruments ThunderLAN
200 device tx # SMC EtherPower II (83c170 ``EPIC'')
201 device vr # VIA Rhine, Rhine II
202 device wb # Winbond W89C840F
203 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
204 device bge # Broadcom BCM570x (``Tigon III'')
207 # 'device ed' requires 'device miibus'
208 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
211 device fe0 at isa? disable port 0x300
214 # PRISM I IEEE 802.11b wireless NIC.
216 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
217 # exists only as a PCMCIA device, so there is no ISA attachment needed
218 # and resources will always be dynamically assigned by the pccard code.
220 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
221 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
222 # mode (the factory default). If you set the switches on your ISA
223 # card for a manually chosen I/O address and IRQ, you must specify
224 # those parameters here.
226 # The probe order of these is presently determined by i386/isa/isa_compat.c.
227 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
228 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
229 device lnc0 at isa? disable port 0x280 irq 10 drq 0
230 device cs0 at isa? disable port 0x300
231 device sn0 at isa? disable port 0x300 irq 10
233 # Pseudo devices - the number indicates how many units to allocate.
234 pseudo-device loop # Network loopback
235 pseudo-device ether # Ethernet support
236 pseudo-device sl 1 # Kernel SLIP
237 pseudo-device ppp 1 # Kernel PPP
238 pseudo-device tun # Packet tunnel.
239 pseudo-device pty # Pseudo-ttys (telnet etc)
240 pseudo-device md # Memory "disks"
241 pseudo-device gif # IPv6 and IPv4 tunneling
242 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
245 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
246 # Be aware of the administrative consequences of enabling this!
247 pseudo-device bpf #Berkeley packet filter
250 device uhci # UHCI PCI->USB interface
251 device ohci # OHCI PCI->USB interface
252 device usb # USB Bus (required)
253 device ugen # Generic
254 device uhid # "Human Interface Devices"
255 device ukbd # Keyboard
256 device ulpt # Printer
257 device umass # Disks/Mass storage - Requires scbus and da
259 device uscanner # Scanners
260 device urio # Diamond Rio MP3 Player
261 # USB Ethernet, requires mii
262 device aue # ADMtek USB ethernet
263 device cue # CATC USB ethernet
264 device kue # Kawasaki LSI USB ethernet
267 device firewire # FireWire bus code
268 device sbp # SCSI over FireWire (Requires scbus and da)
269 device fwe # Ethernet over FireWire (non-standard!)