2 ****************************************************************************
4 * Copyright (c) 1996-2000 Distributed Processing Technology Corporation
5 * Copyright (c) 2000 Adaptec Corporation.
8 * Copyright (c) 1998 I2O Special Interest Group (I2O SIG)
11 * Redistribution and use in source form, with or without modification, are
12 * permitted provided that redistributions of source code must retain the
13 * above copyright notice, this list of conditions and the following disclaimer.
15 * This software is provided `as is' by Distributed Processing Technology and
16 * any express or implied warranties, including, but not limited to, the
17 * implied warranties of merchantability and fitness for a particular purpose,
18 * are disclaimed. In no event shall Distributed Processing Technology be
19 * liable for any direct, indirect, incidental, special, exemplary or
20 * consequential damages (including, but not limited to, procurement of
21 * substitute goods or services; loss of use, data, or profits; or business
22 * interruptions) however caused and on any theory of liability, whether in
23 * contract, strict liability, or tort (including negligence or otherwise)
24 * arising in any way out of the use of this driver software, even if advised
25 * of the possibility of such damage.
27 * This information is provided on an as-is basis without warranty of any
28 * kind, either express or implied, including but not limited to, implied
29 * warranties or merchantability and fitness for a particular purpose. I2O SIG
30 * does not warrant that this program will meet the user's requirements or
31 * that the operation of these programs will be uninterrupted or error-free.
32 * The I2O SIG disclaims all liability, including liability for infringement
33 * of any proprietary rights, relating to implementation of information in
34 * this specification. The I2O SIG does not warrant or represent that such
35 * implementations(s) will not infringe such rights. Acceptance and use of
36 * this program constitutes the user's understanding that he will have no
37 * recourse to I2O SIG for any actual or consequential damages including, but
38 * not limited to, loss profits arising out of use or inability to use this
41 * This information is provided for the purpose of recompilation of the
42 * driver code provided by Distributed Processing Technology only. It is
43 * NOT to be used for any other purpose.
45 * To develop other products based upon I2O definitions, it is necessary to
46 * become a "Registered Developer" of the I2O SIG. This can be done by calling
47 * 415-750-8352 in the US, or via http://www.i2osig.org.
49 * $FreeBSD: src/sys/dev/asr/i2odep.h,v 1.9 2006/02/04 08:01:49 scottl Exp $
51 **************************************************************************/
54 * This template provides place holders for architecture and compiler
55 * dependencies. It should be filled in and renamed as i2odep.h.
56 * i2odep.h is included by i2otypes.h. <xxx> marks the places to fill.
62 #define I2ODEP_REV 1_5_4
65 * Pragma macros. These are to assure appropriate alignment between
66 * host/IOP as defined by the I2O Specification. Each one of the shared
67 * header files includes these macros.
70 #define PRAGMA_ALIGN_PUSH
71 #define PRAGMA_ALIGN_POP
72 #define PRAGMA_PACK_PUSH
73 #define PRAGMA_PACK_POP
75 /* Setup the basics */
77 typedef signed char S8;
78 typedef signed short S16;
80 typedef unsigned char U8;
81 typedef unsigned short U16;
83 typedef u_int32_t U32;
89 #if (defined(__BORLANDC__))
99 #if (defined(_DPT_ARC))
113 typedef unsigned char BOOL;
116 #if !defined(__FAR__)
117 # if defined(__BORLANDC__)
127 # define NULL ((VOID __FAR__ *)0L)
131 #if defined(__SPARC__) || defined(__linux__)
136 typedef unsigned char UINT8;
137 typedef unsigned char *pUINT8;
139 typedef short *pINT16;
140 typedef unsigned short UINT16;
141 typedef unsigned short *pUINT16;
143 typedef long *pINT32;
144 typedef unsigned long UINT32;
145 typedef unsigned long *pUINT32;
146 /* typedef SCSI_REQUEST_BLOCK OS_REQUEST_T; */
147 /* typedef PSCSI_REQUEST_BLOCK pOS_REQUEST_T; */
148 #define STATIC static
150 # if (defined(__BORLANDC__))
151 # define __NEAR__ near
157 #define pBOOLEAN BOOLEAN *
162 * Copyright (c) 1996-2000 Distributed Processing Technology Corporation
163 * Copyright (c) 2000 Adaptec Corporation.
164 * All rights reserved.
167 * Define some generalized portability macros
168 * These macros follow the following parameterization:
169 * _F_getXXX(pointer,primaryElement<,offset>,referredElement)
170 * _F_setXXX(pointer,primaryElement<,offset>,referredElement,newValue)
171 * These parameters are shortened to u, w, x, y and z to reduce clutter.
173 #if (defined(__BORLANDC__))
174 # define I2O_TID_MASK ((U16)((1L<<I2O_TID_SZ)-1))
176 # define _F_getTID(w,x,y) (*((U16 __FAR__ *)(&((w)->x))) & I2O_TID_MASK)
177 # define _F_setTID(w,x,y,z) (*((U16 __FAR__ *)(&((w)->x)))\
178 &= 0xFFFF - I2O_TID_MASK);\
179 (*((U16 __FAR__ *)(&((w)->x)))\
180 |=(U16)(z)&I2O_TID_MASK)
181 /* Seconds 12 bits (optimized with the assumption of 12 & 12) */
182 # define _F_getTID1(w,x,y) ((*(U16 __FAR__ *)(((U8 __FAR__ *)(&((w)->x)))\
184 >> (I2O_TID_SZ-((I2O_TID_SZ/8)*8)))
185 # define _F_setTID1(w,x,y,z) ((*((U16 __FAR__ *)(((U8 __FAR__ *)(&((w)->x)))\
186 + (I2O_TID_SZ/8)))) &= (0xFFFF >> I2O_TID_SZ));\
187 ((*((U16 __FAR__ *)(((U8 __FAR__ *)(&((w)->x)))\
188 + (I2O_TID_SZ/8)))) |= (z)\
189 << (I2O_TID_SZ-((I2O_TID_SZ/8)*8)))
191 # define _F_getFunc(w,x,y) (*(((U8 __FAR__ *)(&((w)->x)))\
192 + ((I2O_TID_SZ+I2O_TID_SZ)/8)))
193 # define _F_setFunc(w,x,y,z) (_F_getFunc(w,x,y) = (z))
194 # define I2O_SG_COUNT_MASK ((U32)((1L<<I2O_SG_COUNT_SZ)-1))
196 # define _F_getCount(w,x,y) (*((U32 __FAR__ *)(&((w)->x)))&I2O_SG_COUNT_MASK)
198 * The following is less efficient because of compiler inefficiencies:
200 * # define _F_setCount(w,x,y,z) *((U16 __FAR__ *)(&((w)->x))) = (U16)(z);\
201 * ((U8 __FAR__ *)(&((w)->x)))[2]= (U8)((z)>>16L)
203 * so we will use the apparently more code intensive:
205 # define _F_setCount(w,x,y,z) (*((U32 __FAR__ *)(&((w)->x)))\
206 &= 0xFFFFFFFFL - I2O_SG_COUNT_MASK);\
207 (*((U32 __FAR__ *)(&((w)->x)))\
208 |= (z) & I2O_SG_COUNT_MASK)
210 # define _F_getFlags(w,x,y) (*(((U8 __FAR__ *)(&((w)->x)))\
211 + (I2O_SG_COUNT_SZ/8)))
212 # define _F_setFlags(w,x,y,z) (_F_getFlags(w,x,y) = (z))
213 /* Other accesses that are simpler */
214 # define _F_get1bit(w,x,y,z) ((U8)((w)->z))
215 # define _F_set1bit(w,x,y,z,u) ((w)->z = (u))
216 # define _F_get1bit1(w,x,y,z) ((U8)((w)->z))
217 # define _F_set1bit1(w,x,y,z,u) ((w)->z = (u))
218 # define _F_get4bit4(w,x,y,z) ((U8)((w)->z))
219 # define _F_set4bit4(w,x,y,z,u) ((w)->z = (u))
220 # define _F_get8bit(w,x,y,z) ((U8)((w)->z))
221 # define _F_set8bit(w,x,y,z,u) ((w)->z = (u))
222 # define _F_get12bit(w,x,y,z) ((U16)((w)->z))
223 # define _F_set12bit(w,x,y,z,u) ((w)->z = (u))
224 # define _F_get12bit4(w,x,y,z) ((U16)((w)->z))
225 # define _F_set12bit4(w,x,y,z,u) ((w)->z = (u))
226 # define _F_get16bit(w,x,y,z) ((U16)((w)->z))
227 # define _F_set16bit(w,x,y,z,u) ((w)->z = (u))
228 #elif (defined(_DPT_BIG_ENDIAN))
230 # define _F_getTID(w,x,y) getL12bit(w,x,0)
231 # define _F_setTID(w,x,y,z) setL12bit(w,x,0,z)
232 # define _F_getTID1(w,x,y) getL12bit1(w,x,0)
233 # define _F_setTID1(w,x,y,z) setL12bit1(w,x,0,z)
234 # define _F_getFunc(w,x,y) getL8bit(w,x,3)
235 # define _F_setFunc(w,x,y,z) setL8bit(w,x,3,z)
236 # define _F_getCount(w,x,y) getL24bit1(w,x,0)
237 # define _F_setCount(w,x,y,z) setL24bit1(w,x,0,z)
238 # define _F_getFlags(w,x,y) getL8bit(w,x,3)
239 # define _F_setFlags(w,x,y,z) setL8bit(w,x,3,z)
240 /* Other accesses that are simpler */
241 # define _F_get1bit(w,x,y,z) getL1bit(w,x,y)
242 # define _F_set1bit(w,x,y,z,u) setL1bit(w,x,y,u)
243 # define _F_get1bit1(w,x,y,z) getL1bit1(w,x,y)
244 # define _F_set1bit1(w,x,y,z,u) setL1bit1(w,x,y,u)
245 # define _F_get4bit4(w,x,y,z) getL4bit(w,x,y)
246 # define _F_set4bit4(w,x,y,z,u) setL4bit(w,x,y,u)
247 # define _F_get8bit(w,x,y,z) getL8bit(w,x,y)
248 # define _F_set8bit(w,x,y,z,u) setL8bit(w,x,y,u)
249 # define _F_get12bit(w,x,y,z) getL12bit(w,x,y)
250 # define _F_set12bit(w,x,y,z,u) setL12bit(w,x,y,z)
251 # define _F_get12bit4(w,x,y,z) getL12bit1(w,x,(y)-1)
252 # define _F_set12bit4(w,x,y,z,u) setL12bit1(w,x,(y)-1,u)
253 # define _F_get16bit(w,x,y,z) getL16bit(w,x,y)
254 # define _F_set16bit(w,x,y,z,u) setL16bit(w,x,y,u)
256 # define _F_getTID(w,x,y) ((U16)((w)->y))
257 # define _F_setTID(w,x,y,z) ((w)->y = (z))
258 # define _F_getTID1(w,x,y) ((U16)((w)->y))
259 # define _F_setTID1(w,x,y,z) ((w)->y = (z))
260 # define _F_getFunc(w,x,y) ((U8)((w)->y))
261 # define _F_setFunc(w,x,y,z) ((w)->y = (z))
262 # define _F_getCount(w,x,y) ((U32)((w)->y))
263 # define _F_setCount(w,x,y,z) ((w)->y = (z))
264 # define _F_getFlags(w,x,y) ((U8)((w)->y))
265 # define _F_setFlags(w,x,y,z) ((w)->y = (z))
266 # define _F_get1bit(w,x,y,z) ((U8)((w)->z))
267 # define _F_set1bit(w,x,y,z,u) ((w)->z = (u))
268 # define _F_get1bit1(w,x,y,z) ((U8)((w)->z))
269 # define _F_set1bit1(w,x,y,z,u) ((w)->z = (u))
270 # define _F_get4bit4(w,x,y,z) ((U8)((w)->z))
271 # define _F_set4bit4(w,x,y,z,u) ((w)->z = (u))
272 # define _F_get8bit(w,x,y,z) ((U8)((w)->z))
273 # define _F_set8bit(w,x,y,z,u) ((w)->z = (u))
274 # define _F_get12bit(w,x,y,z) ((U16)((w)->z))
275 # define _F_set12bit(w,x,y,z,u) ((w)->z = (u))
276 # define _F_get12bit4(w,x,y,z) ((U16)((w)->z))
277 # define _F_set12bit4(w,x,y,z,u) ((w)->z = (u))
278 # define _F_get16bit(w,x,y,z) ((U16)((w)->z))
279 # define _F_set16bit(w,x,y,z,u) ((w)->z = (u))
283 * Define some specific portability macros
284 * These macros follow the following parameterization:
285 * XXX_getYYY (pointer)
286 * XXX_setYYY (pointer, newValue)
287 * These parameters are shortened to x and y to reduce clutter.
293 #define I2O_FLAGS_COUNT_getCount(x) _F_getCount(x,Count,Count)
294 #define I2O_FLAGS_COUNT_setCount(x,y) _F_setCount(x,Count,Count,y)
295 #define I2O_FLAGS_COUNT_getFlags(x) _F_getFlags(x,Count,Flags)
296 #define I2O_FLAGS_COUNT_setFlags(x,y) _F_setFlags(x,Count,Flags,y)
299 * I2O_SGE_SIMPLE_ELEMENT
301 #define I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(x) \
302 getLU4((&(x)->PhysicalAddress),0)
303 #define I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(x,y) \
304 setLU4((&(x)->PhysicalAddress),0,y)
306 * I2O_SGE_LONG_TRANSACTION_ELEMENT
308 #define I2O_SGE_LONG_TRANSACTION_ELEMENT_getLongElementLength(x)\
309 _F_getCount(x,LongElementLength,LongElementLength)
310 #define I2O_SGE_LONG_TRANSACTION_ELEMENT_setLongElementLength(x,y)\
311 _F_setCount(x,LongElementLength,LongElementLength,y)
312 #define I2O_SGE_LONG_TRANSACTION_ELEMENT_getFlags(x)\
313 _F_getFlags(x,LongElementLength,Flags)
314 #define I2O_SGE_LONG_TRANSACTION_ELEMENT_setFlags(x,y)\
315 _F_setFlags(x,LongElementLength,Flags,y)
318 * I2O_SGE_LONG_TRANSPORT_ELEMENT
320 #define I2O_SGE_LONG_TRANSPORT_ELEMENT_getLongElementLength(x)\
321 _F_getCount(x,LongElementLength,LongElementLength)
322 #define I2O_SGE_LONG_TRANSPORT_ELEMENT_setLongElementLength(x,y)\
323 _F_setCount(x,LongElementLength,LongElementLength,y)
324 #define I2O_SGE_LONG_TRANSPORT_ELEMENT_getFlags(x)\
325 _F_getFlags(x,LongElementLength,Flags)
326 #define I2O_SGE_LONG_TRANSPORT_ELEMENT_setFlags(x,y)\
327 _F_setFlags(x,LongElementLength,Flags,y)
330 * I2O_EXEC_ADAPTER_ASSIGN_MESSAGE
332 #define I2O_EXEC_ADAPTER_ASSIGN_MESSAGE_getDdmTID(x)\
333 _F_getTID(x,DdmTID,DdmTID)
334 #define I2O_EXEC_ADAPTER_ASSIGN_MESSAGE_setDdmTID(x,y)\
335 _F_setTID(x,DDdmTID,DdmTID,y)
336 #define I2O_EXEC_ADAPTER_ASSIGN_MESSAGE_getOperationFlags(x)\
337 _F_getFunc(x,DdmTID,OperationFlags)
338 #define I2O_EXEC_ADAPTER_ASSIGN_MESSAGE_setOperationFlags(x,y)\
339 _F_setFunc(x,DdmTID,OperationFlags,y)
342 * I2O_EXEC_BIOS_INFO_SET_MESSAGE
344 #define I2O_EXEC_BIOS_INFO_SET_MESSAGE_getDeviceTID(x)\
345 _F_getTID(x,DeviceTID,DeviceTID)
346 #define I2O_EXEC_BIOS_INFO_SET_MESSAGE_setDeviceTID(x,y)\
347 _F_setTID(x,DeviceTID,DeviceTID,y)
348 #define I2O_EXEC_BIOS_INFO_SET_MESSAGE_getBiosInfo(x)\
349 _F_getFunc(x,DeviceTID,BiosInfo)
350 #define I2O_EXEC_BIOS_INFO_SET_MESSAGE_setBiosInfo(x,y) \
351 _F_setFunc(x,DeviceTID,BiosInfo,y)
354 * I2O_ALIAS_CONNECT_SETUP
356 #define I2O_ALIAS_CONNECT_SETUP_getIOP1AliasForTargetDevice(x)\
357 _F_getTID(x,IOP1AliasForTargetDevice,IOP1AliasForTargetDevice)
358 #define I2O_ALIAS_CONNECT_SETUP_setIOP1AliasForTargetDevice(x,y)\
359 _F_setTID(x,IOP1AliasForTargetDevice,IOP1AliasForTargetDevice,y)
360 #define I2O_ALIAS_CONNECT_SETUP_getIOP2AliasForInitiatorDevice(x)\
361 _F_getTID1(x,IOP1AliasForTargetDevice,IOP2AliasForInitiatorDevice)
362 #define I2O_ALIAS_CONNECT_SETUP_setIOP2AliasForInitiatorDevice(x,y)\
363 _F_setTID1(x,IOP1AliasForTargetDevice,IOP2AliasForInitiatorDevice,y)
366 * I2O_OBJECT_CONNECT_SETUP
368 #define I2O_OBJECT_CONNECT_SETUP_getTargetDevice(x)\
369 _F_getTID(x,TargetDevice,TargetDevice)
370 #define I2O_OBJECT_CONNECT_SETUP_setTargetDevice(x,y)\
371 _F_setTID(x,TargetDevice,TargetDevice,y)
372 #define I2O_OBJECT_CONNECT_SETUP_getInitiatorDevice(x)\
373 _F_getTID1(x,TargetDevice,InitiatorDevice)
374 #define I2O_OBJECT_CONNECT_SETUP_setInitiatorDevice(x,y)\
375 _F_setTID1(x,TargetDevice,InitiatorDevice,y)
376 #define I2O_OBJECT_CONNECT_SETUP_getOperationFlags(x)\
377 _F_getFunc(x,TargetDevice,OperationFlags)
378 #define I2O_OBJECT_CONNECT_SETUP_setOperationFlags(x,y)\
379 _F_setFunc(x,TargetDevice,OperationFlags,y)
382 * I2O_OBJECT_CONNECT_REPLY
384 #define I2O_OBJECT_CONNECT_REPLY_getTargetDevice(x)\
385 _F_getTID(x,TargetDevice,TargetDevice)
386 #define I2O_OBJECT_CONNECT_REPLY_setTargetDevice(x,y)\
387 _F_setTID(x,TargetDevice,TargetDevice,y)
388 #define I2O_OBJECT_CONNECT_REPLY_getInitiatorDevice(x)\
389 _F_getTID1(x,TargetDevice,InitiatorDevice)
390 #define I2O_OBJECT_CONNECT_REPLY_setInitiatorDevice(x,y)\
391 _F_setTID1(x,TargetDevice,InitiatorDevice,y)
392 #define I2O_OBJECT_CONNECT_REPLY_getReplyStatusCode(x)\
393 _F_getFunc(x,TargetDevice,ReplyStatusCode)
394 #define I2O_OBJECT_CONNECT_REPLY_setReplyStatusCode(x,y)\
395 _F_setFunc(x,TargetDevice,ReplyStatusCode,y)
398 * I2O_EXEC_DEVICE_ASSIGN_MESSAGE
400 #define I2O_EXEC_DEVICE_ASSIGN_MESSAGE_getDeviceTID(x)\
401 _F_getTID(x,Object.DeviceTID,Object.DeviceTID)
402 #define I2O_EXEC_DEVICE_ASSIGN_MESSAGE_setDeviceTID(x,y)\
403 _F_setTID(x,Object.DeviceTID,Object.DeviceTID,y)
404 #define I2O_EXEC_DEVICE_ASSIGN_MESSAGE_getIOP_ID(x)\
405 _F_getTID1(x,Object.DeviceTID,Object.IOP_ID)
406 #define I2O_EXEC_DEVICE_ASSIGN_MESSAGE_setIOP_ID(x,y)\
407 _F_setTID1(x,Object.DeviceTID,Object.IOP_ID,y)
408 #define I2O_EXEC_DEVICE_ASSIGN_MESSAGE_getOperationFlags(x)\
409 _F_getFunc(x,Object.DeviceTID,Object.OperationFlags)
410 #define I2O_EXEC_DEVICE_ASSIGN_MESSAGE_setOperationFlags(x,y)\
411 _F_setFunc(x,Object.DeviceTID,Object.OperationFlags,y)
414 * I2O_EXEC_DEVICE_RELEASE_MESSAGE
416 #define I2O_EXEC_DEVICE_RELEASE_MESSAGE_getDeviceTID(x)\
417 _F_getTID(x,Object.DeviceTID,Object.DeviceTID)
418 #define I2O_EXEC_DEVICE_RELEASE_MESSAGE_setDeviceTID(x,y)\
419 _F_setTID(x,Object.DeviceTID,Object.DeviceTID,y)
420 #define I2O_EXEC_DEVICE_RELEASE_MESSAGE_getIOP_ID(x)\
421 _F_getTID1(x,Object.DeviceTID,Object.IOP_ID)
422 #define I2O_EXEC_DEVICE_RELEASE_MESSAGE_setIOP_ID(x,y)\
423 _F_setTID1(x,Object.DeviceTID,Object.IOP_ID,y)
424 #define I2O_EXEC_DEVICE_RELEASE_MESSAGE_getOperationFlags(x)\
425 _F_getFunc(x,Object.DeviceTID,Object.OperationFlags)
426 #define I2O_EXEC_DEVICE_RELEASE_MESSAGE_setOperationFlags(x,y)\
427 _F_setFunc(x,Object.DeviceTID,Object.OperationFlags,y)
430 * I2O_EXEC_IOP_RESET_MESSAGE
432 #define I2O_EXEC_IOP_RESET_MESSAGE_getTargetAddress(x)\
433 _F_getTID(x,TargetAddress,TargetAddress)
434 #define I2O_EXEC_IOP_RESET_MESSAGE_setTargetAddress(x,y)\
435 _F_setTID(x,TargetAddress,TargetAddress,y)
436 #define I2O_EXEC_IOP_RESET_MESSAGE_getInitiatorAddress(x)\
437 _F_getTID1(x,TargetAddress,InitiatorAddress)
438 #define I2O_EXEC_IOP_RESET_MESSAGE_setInitiatorAddress(x,y)\
439 _F_setTID1(x,TargetAddress,InitiatorAddress,y)
440 #define I2O_EXEC_IOP_RESET_MESSAGE_getFunction(x)\
441 _F_getFunc(x,TargetAddress,Function)
442 #define I2O_EXEC_IOP_RESET_MESSAGE_setFunction(x,y)\
443 _F_setFunc(x,TargetAddress,Function,y)
444 #define I2O_EXEC_IOP_RESET_MESSAGE_getVersionOffset(x)\
445 getU1((&(x)->VersionOffset),0)
446 #define I2O_EXEC_IOP_RESET_MESSAGE_setVersionOffset(x,y)\
447 setU1((&(x)->VersionOffset),0,y)
448 #define I2O_EXEC_IOP_RESET_MESSAGE_getMsgFlags(x)\
449 getU1((&(x)->VersionOffset),1)
450 #define I2O_EXEC_IOP_RESET_MESSAGE_setMsgFlags(x,y)\
451 setU1((&(x)->VersionOffset),1,y)
452 #define I2O_EXEC_IOP_RESET_MESSAGE_getMessageSize(x)\
453 getLU2((&(x)->VersionOffset),2)
454 #define I2O_EXEC_IOP_RESET_MESSAGE_setMessageSize(x,y)\
455 setLU2((&(x)->VersionOffset),2,y)
456 #define I2O_EXEC_IOP_RESET_MESSAGE_getStatusWordLowAddress(x)\
457 getLU4((&(x)->StatusWordLowAddress),0)
458 #define I2O_EXEC_IOP_RESET_MESSAGE_setStatusWordLowAddress(x,y)\
459 setLU4((&(x)->StatusWordLowAddress),0,y)
460 #define I2O_EXEC_IOP_RESET_MESSAGE_getStatusWordHighAddress(x)\
461 getLU4((&(x)->StatusWordHighAddress),0)
462 #define I2O_EXEC_IOP_RESET_MESSAGE_setStatusWordHighAddress(x,y)\
463 setLU4((&(x)->StatusWordHighAddress),0,y)
467 * I2O_EXEC_STATUS_GET_MESSAGE
469 #define I2O_EXEC_STATUS_GET_MESSAGE_getVersionOffset(x)\
470 getU1((&(x)->VersionOffset),0)
471 #define I2O_EXEC_STATUS_GET_MESSAGE_setVersionOffset(x,y)\
472 setU1((&(x)->VersionOffset),0,y)
473 #define I2O_EXEC_STATUS_GET_MESSAGE_getMsgFlags(x)\
474 getU1((&(x)->VersionOffset),1)
475 #define I2O_EXEC_STATUS_GET_MESSAGE_setMsgFlags(x,y)\
476 setU1((&(x)->VersionOffset),1,y)
477 #define I2O_EXEC_STATUS_GET_MESSAGE_getMessageSize(x)\
478 getLU2((&(x)->VersionOffset),2)
479 #define I2O_EXEC_STATUS_GET_MESSAGE_setMessageSize(x,y)\
480 setLU2((&(x)->VersionOffset),2,y)
481 #define I2O_EXEC_STATUS_GET_MESSAGE_getReplyBufferAddressLow(x)\
482 getLU4((&(x)->ReplyBufferAddressLow),0)
483 #define I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferAddressLow(x,y)\
484 setLU4((&(x)->ReplyBufferAddressLow),0,y)
485 #define I2O_EXEC_STATUS_GET_MESSAGE_getReplyBufferAddressHigh(x)\
486 getLU4((&(x)->ReplyBufferAddressHigh),0)
487 #define I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferAddressHigh(x,y)\
488 setLU4((&(x)->ReplyBufferAddressHigh),0,y)
489 #define I2O_EXEC_STATUS_GET_MESSAGE_getReplyBufferLength(x)\
490 getLU4((&(x)->ReplyBufferLength),0)
491 #define I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferLength(x,y)\
492 setLU4((&(x)->ReplyBufferLength),0,y)
493 #define I2O_EXEC_STATUS_GET_MESSAGE_getTargetAddress(x)\
494 _F_getTID(x,TargetAddress,TargetAddress)
495 #define I2O_EXEC_STATUS_GET_MESSAGE_setTargetAddress(x,y)\
496 _F_setTID(x,TargetAddress,TargetAddress,y)
497 #define I2O_EXEC_STATUS_GET_MESSAGE_getInitiatorAddress(x)\
498 _F_getTID1(x,TargetAddress,InitiatorAddress)
499 #define I2O_EXEC_STATUS_GET_MESSAGE_setInitiatorAddress(x,y)\
500 _F_setTID1(x,TargetAddress,InitiatorAddress,y)
501 #define I2O_EXEC_STATUS_GET_MESSAGE_getFunction(x)\
502 _F_getFunc(x,TargetAddress,Function)
503 #define I2O_EXEC_STATUS_GET_MESSAGE_setFunction(x,y)\
504 _F_setFunc(x,TargetAddress,Function,y)
509 #define I2O_MESSAGE_FRAME_getVersionOffset(x)\
510 getU1((&((x)->VersionOffset)),0)
511 #define I2O_MESSAGE_FRAME_setVersionOffset(x,y)\
512 setU1(((&(x)->VersionOffset)),0,y)
513 #define I2O_MESSAGE_FRAME_getMsgFlags(x)\
514 getU1((&((x)->VersionOffset)),1)
515 #define I2O_MESSAGE_FRAME_setMsgFlags(x,y)\
516 setU1((&((x)->VersionOffset)),1,y)
517 #define I2O_MESSAGE_FRAME_getMessageSize(x)\
518 getLU2((&((x)->VersionOffset)),2)
519 #define I2O_MESSAGE_FRAME_setMessageSize(x,y)\
520 setLU2((&((x)->VersionOffset)),2,y)
521 #define I2O_MESSAGE_FRAME_getTargetAddress(x)\
522 _F_getTID(x,TargetAddress,TargetAddress)
523 #define I2O_MESSAGE_FRAME_setTargetAddress(x,y)\
524 _F_setTID(x,TargetAddress,TargetAddress,y)
525 #define I2O_MESSAGE_FRAME_getInitiatorAddress(x)\
526 _F_getTID1(x,TargetAddress,InitiatorAddress)
527 #define I2O_MESSAGE_FRAME_setInitiatorAddress(x,y)\
528 _F_setTID1(x,TargetAddress,InitiatorAddress,y)
529 #define I2O_MESSAGE_FRAME_getFunction(x)\
530 _F_getFunc(x,TargetAddress,Function)
531 #define I2O_MESSAGE_FRAME_setFunction(x,y)\
532 _F_setFunc(x,TargetAddress,Function,y)
533 /* 32 bit only for now */
534 #define I2O_MESSAGE_FRAME_getInitiatorContext(x)\
535 (x)->InitiatorContext
536 #define I2O_MESSAGE_FRAME_setInitiatorContext(x,y)\
537 ((x)->InitiatorContext = (y))
539 * We are spilling the 64 bit Context field into the Transaction
540 * context of the specific frames. Synchronous commands (resetIop
541 * et al) do not have this field, so beware. Also, Failed Reply frames
542 * can not contain the 64 bit context, the software must reference
543 * the PreservedMFA and pick up the 64 bit context from the incoming
544 * message frame. The software must make no reference to the
545 * TransactionContext field at all.
547 #if defined(_MSC_VER) && _MSC_VER >= 800
549 #define u_int64_t unsigned __int64
552 #define I2O_MESSAGE_FRAME_getInitiatorContext64(x)\
553 (*((u_int64_t *)(&((x)->InitiatorContext))))
554 #define I2O_MESSAGE_FRAME_setInitiatorContext64(x,y)\
555 ((*((u_int64_t *)(&((x)->InitiatorContext))))=(y))
558 * I2O_EXEC_OUTBOUND_INIT_MESSAGE
560 #define I2O_EXEC_OUTBOUND_INIT_MESSAGE_getHostPageFrameSize(x)\
561 getLU4((&(x)->HostPageFrameSize),0)
562 #define I2O_EXEC_OUTBOUND_INIT_MESSAGE_setHostPageFrameSize(x,y)\
563 setLU4((&(x)->HostPageFrameSize),0,y)
564 #define I2O_EXEC_OUTBOUND_INIT_MESSAGE_getInitCode(x)\
565 getU1((&(x)->InitCode),0)
566 #define I2O_EXEC_OUTBOUND_INIT_MESSAGE_setInitCode(x,y)\
567 setU1((&(x)->InitCode),0,y)
568 #define I2O_EXEC_OUTBOUND_INIT_MESSAGE_getreserved(x)\
569 getU1((&(x)->reserved),0)
570 #define I2O_EXEC_OUTBOUND_INIT_MESSAGE_setreserved(x,y)\
571 setU1((&(x)->reserved),0,y)
572 #define I2O_EXEC_OUTBOUND_INIT_MESSAGE_getOutboundMFrameSize(x)\
573 getLU2((&(x)->OutboundMFrameSize),0)
574 #define I2O_EXEC_OUTBOUND_INIT_MESSAGE_setOutboundMFrameSize(x,y)\
575 setLU2((&(x)->OutboundMFrameSize),0,y)
578 * I2O_EXEC_SYS_TAB_SET_MESSAGE
580 #define I2O_EXEC_SYS_TAB_SET_MESSAGE_getIOP_ID(x)\
581 _F_get12bit(x,IOP_ID,IOP_ID)
582 #define I2O_EXEC_SYS_TAB_SET_MESSAGE_setIOP_ID(x,y)\
583 _F_set12bit(x,IOP_ID,IOP_ID,y)
584 /* #define I2O_EXEC_SYS_TAB_SET_MESSAGE_getreserved1(x) */
585 #define I2O_EXEC_SYS_TAB_SET_MESSAGE_getHostUnitID(x)\
586 _F_get16bit(x,IOP_ID,2,HostUnitID)
587 #define I2O_EXEC_SYS_TAB_SET_MESSAGE_setHostUnitID(x,y)\
588 _F_set16bit(x,IOP_ID,2,HostUnitID,y)
589 #define I2O_EXEC_SYS_TAB_SET_MESSAGE_getSegmentNumber(x)\
590 _F_get12bit(x,SegmentNumber,SegmentNumber)
591 #define I2O_EXEC_SYS_TAB_SET_MESSAGE_setSegmentNumber(x,y)\
592 _F_get12bit(x,SegmentNumber,SegmentNumber,y)
595 * I2O_EXEC_SYS_ENABLE_MESSAGE
601 #define I2O_CLASS_ID_getClass(x)\
602 _F_get12bit(x,Class,0,Class)
603 #define I2O_CLASS_ID_setClass(x,y)\
604 _F_set12bit(x,Class,0,Class,y)
605 #define I2O_CLASS_ID_getVersion(x)\
606 _F_get4bit4(x,Class,1,Version)
607 #define I2O_CLASS_ID_setVersion(x,y)\
608 _F_set4bit4(x,Class,1,Version,y)
609 #define I2O_CLASS_ID_getOrganizationID(x)\
610 _F_get16bit(x,Class,2,OrganizationID)
611 #define I2O_CLASS_ID_setOrganizationID(x,y)\
612 _F_set16bit(x,Class,2,OrganizationID,y)
615 * I2O_SET_SYSTAB_HEADER
617 #define I2O_SET_SYSTAB_HEADER_getNumberEntries(x)\
618 getU1((&((x)->NumberEntries)),0)
619 #define I2O_SET_SYSTAB_HEADER_setNumberEntries(x,y)\
620 setU1((&(x)->NumberEntries),0,y)
621 #define I2O_SET_SYSTAB_HEADER_getSysTabVersion(x)\
622 getU1((&((x)->SysTabVersion)),0)
623 #define I2O_SET_SYSTAB_HEADER_setSysTabVersion(x,y)\
624 setU1((&(x)->SysTabVersion),0,y)
626 /* U32 CurrentChangeIndicator */
634 #define I2O_IOP_ENTRY_getOrganizationID(x)\
635 getLU2((&((x)->OrganizationID)),0)
636 #define I2O_IOP_ENTRY_setOrganizationID(x,y)\
637 setLU2((&((x)->OrganizationID)),0,y)
638 /* #define I2O_IOP_ENTRY_getreserved U16; */
639 #define I2O_IOP_ENTRY_getIOP_ID(x)\
640 _F_get12bit(x,IOP_ID,0,IOP_ID)
641 #define I2O_IOP_ENTRY_setIOP_ID(x,y)\
642 _F_set12bit(x,IOP_ID,0,IOP_ID,y)
643 /* BF reserved3:I2O_RESERVED_4BITS; */
644 /* BF reserved1:I2O_RESERVED_16BITS; */
645 #define I2O_IOP_ENTRY_getSegmentNumber(x)\
646 _F_get12bit(x,SegmentNumber,0,SegmentNumber)
647 #define I2O_IOP_ENTRY_setSegmentNumber(x,y)\
648 _F_set12bit(x,SegmentNumber,0,SegmentNumber,y)
649 #define I2O_IOP_ENTRY_getI2oVersion(x)\
650 _F_get4bit4(x,SegmentNumber,1,I2oVersion)
651 #define I2O_IOP_ENTRY_setI2oVersion(x,y)\
652 _F_set4bit4(x,SegmentNumber,1,I2oVersion,y)
653 #define I2O_IOP_ENTRY_getIopState(x)\
654 _F_get8bit(x,SegmentNumber,2,IopState)
655 #define I2O_IOP_ENTRY_setIopState(x,y)\
656 _F_set8bit(x,SegmentNumber,2,IopState,y)
657 #define I2O_IOP_ENTRY_getMessengerType(x)\
658 _F_get8bit(x,SegmentNumber,3,MessengerType)
659 #define I2O_IOP_ENTRY_setMessengerType(x,y)\
660 _F_set8bit(x,SegmentNumber,3,MessengerType,y)
661 #define I2O_IOP_ENTRY_getInboundMessageFrameSize(x)\
662 getLU2((&((x)->InboundMessageFrameSize)),0)
663 #define I2O_IOP_ENTRY_setInboundMessageFrameSize(x,y)\
664 setLU2((&((x)->InboundMessageFrameSize)),0,y)
665 #define I2O_IOP_ENTRY_getreserved2(x)\
666 getLU2((&((x)->reserved2)),0)
667 #define I2O_IOP_ENTRY_setreserved2(x,y)\
668 setLU2((&((x)->reserved2)),0,y)
669 #define I2O_IOP_ENTRY_getLastChanged(x)\
670 getLU4((&((x)->LastChanged)),0)
671 #define I2O_IOP_ENTRY_setLastChanged(x,y)\
672 setLU4((&((x)->LastChanged)),0,y)
673 #define I2O_IOP_ENTRY_getIopCapabilities(x)\
674 getLU4((&((x)->IopCapabilities)),0)
675 #define I2O_IOP_ENTRY_setIopCapabilities(x,y)\
676 setLU4((&((x)->IopCapabilities)),0,y)
678 /* might want to declare I2O_MESSENGER_INFO struct */
680 #define I2O_IOP_ENTRY_getInboundMessagePortAddressLow(x)\
681 getLU4((&((x)->MessengerInfo.InboundMessagePortAddressLow)),0)
682 #define I2O_IOP_ENTRY_setInboundMessagePortAddressLow(x,y)\
683 setLU4((&((x)->MessengerInfo.InboundMessagePortAddressLow)),0,y)
685 #define I2O_IOP_ENTRY_getInboundMessagePortAddressHigh(x)\
686 getLU4((&((x)->MessengerInfo.InboundMessagePortAddressHigh)),0)
687 #define I2O_IOP_ENTRY_setInboundMessagePortAddressHigh(x,y)\
688 setLU4((&((x)->MessengerInfo.InboundMessagePortAddressHigh)),0,y)
693 #define I2O_HRT_getNumberEntries(x)\
694 getLU2((&((x)->NumberEntries)),0)
695 #define I2O_HRT_setNumberEntries(x,y)\
696 setLU2((&(x)->NumberEntries),0,y)
697 #define I2O_HRT_getEntryLength(x)\
698 getU1((&(x)->EntryLength),0)
699 #define I2O_HRT_setEntryLength(x,y)\
700 setU1((&(x)->EntryLength),0,y)
701 #define I2O_HRT_getHRTVersion(x)\
702 getU1((&(x)->HRTVersion),0)
703 #define I2O_HRT_setHRTVersion(x,y)\
704 setU1((&(x)->HRTVersion),0,y)
705 #define I2O_HRT_getCurrentChangeIndicator(x)\
706 getLU4((&(x)->CurrentChangeIndicator),0)
707 #define I2O_HRT_setCurrentChangeIndicator(x,y)\
708 setLU4((&(x)->CurrentChangeIndicator),0,y)
709 #define I2O_HRT_getHRTEntryPtr(x,y)\
710 ((&((x)->HRTEntry[0+y])))
715 #define I2O_HRT_ENTRY_getAdapterID(x)\
716 getLU4((&((x)->AdapterID)),0)
717 #define I2O_HRT_ENTRY_setAdapterID(x,y)\
718 setLU4((&(x)->AdapterID),0,y)
719 #define I2O_HRT_ENTRY_getControllingTID(x)\
720 _F_get12bit(x,ControllingTID,ControllingTID)
721 #define I2O_HRT_ENTRY_setControllingTID(x,y)\
722 _F_set12bit(x,ControllingTID,ControllingTID,y)
723 #define I2O_HRT_ENTRY_getAdapterState(x)\
724 _F_get4bit4(x,ControllingTID,1,AdapterState)
725 #define I2O_HRT_ENTRY_setIAdapterState(x,y)\
726 _F_set4bit4(x,ControllingTID,1,AdapterState,y)
727 #define I2O_HRT_ENTRY_getBusNumber(x)\
728 _F_get8bit(x,ControllingTID,2,BusNumber)
729 #define I2O_HRT_ENTRY_setBusNumber(x,y)\
730 _F_set8bit(x,ControllingTID,2,BusNumber,y)
731 #define I2O_HRT_ENTRY_getBusType(x)\
732 _F_get8bit(x,ControllingTID,3,BusType)
733 #define I2O_HRT_ENTRY_setBusType(x,y)\
734 _F_set8bit(x,ControllingTID,3,BusType,y)
735 #define I2O_HRT_ENTRY_getPCIBusPtr(x,y)\
736 (&((x)->uBus.PCIBus))
741 #define I2O_LCT_getTableSize(x)\
742 _F_get16bit(x,TableSize,0,TableSize)
743 #define I2O_LCT_setTableSize(x,y)\
744 _F_set16bit(x,TableSize,0,TableSize,y)
745 #define I2O_LCT_getBootDeviceTID(x)\
746 _F_get12bit(x,TableSize,2,BootDeviceTID)
747 #define I2O_LCT_setBootDeviceTID(x,y)\
748 _F_set12bit(x,TableSize,2,BootDeviceTID,y)
749 #define I2O_LCT_getLctVer(x)\
750 _F_get4bit4(x,TableSize,3,LctVer)
751 #define I2O_LCT_setLctVer(x,y)\
752 _F_set4bit4(x,TableSize,3,LctVer,y)
753 #define I2O_LCT_getIopFlags(x)\
754 getLU4((&(x)->IopFlags),0)
755 #define I2O_LCT_setIopFlags(x,y)\
756 setLU4((&(x)->IopFlags),0,y)
757 #define I2O_LCT_getCurrentChangeIndicator(x)\
758 getLU4((&(x)->CurrentChangeIndicator),0)
759 #define I2O_LCT_setCurrentChangeIndicator(x,y)\
760 setLU4((&(x)->CurrentChangeIndicator),0,y)
761 #define I2O_LCT_getLCTEntryPtr(x,y)\
762 (&((x)->LCTEntry[0+y]))
767 #define I2O_LCT_ENTRY_getTableEntrySize(x)\
768 _F_get16bit(x,TableEntrySize,0,TableEntrySize)
769 #define I2O_LCT_ENTRY_setTableEntrySize(x,y)\
770 _F_set16bit(x,TableEntrySize,0,TableEntrySize,y)
771 #define I2O_LCT_ENTRY_getLocalTID(x)\
772 _F_get12bit(x,TableEntrySize,2,LocalTID)
773 #define I2O_LCT_ENTRY_setLocalTID(x,y)\
774 _F_set12bit(x,TableEntrySize,2,LocalTID,y)
775 /* BF 4 reserved:I2O_4BIT_VERSION_SZ; */
776 #define I2O_LCT_ENTRY_getChangeIndicator(x)\
777 getLU4((&(x)->ChangeIndicator),0)
778 #define I2O_LCT_ENTRY_setChangeIndicator(x,y)\
779 setLU4((&(x)->ChangeIndicator),0,y)
780 #define I2O_LCT_ENTRY_getDeviceFlags(x)\
781 getLU4((&(x)->DeviceFlags),0)
782 #define I2O_LCT_ENTRY_setDeviceFlags(x,y)\
783 setLU4((&(x)->DeviceFlags),0,y)
784 #define I2O_LCT_ENTRY_getClassIDPtr(x)\
786 #define I2O_LCT_ENTRY_getSubClassInfo(x)\
787 getLU4((&(x)->SubClassInfo),0)
788 #define I2O_LCT_ENTRY_setSubClassInfo(x,y)\
789 setLU4((&(x)->SubClassInfo),0,y)
790 #define I2O_LCT_ENTRY_getUserTID(x)\
791 _F_getTID(x,UserTID,UserTID)
792 #define I2O_LCT_ENTRY_setUserTID(x,y)\
793 _F_setTID(x,UserTID,UserTID,y)
794 #define I2O_LCT_ENTRY_getParentTID(x)\
795 _F_getTID1(x,UserTID,ParentTID)
796 #define I2O_LCT_ENTRY_setParentTID(x,y)\
797 _F_getTID1(x,UserTID,ParentTID,y)
798 #define I2O_LCT_ENTRY_getBiosInfo(x)\
799 _F_getFunc(x,UserTID,BiosInfo)
800 #define I2O_LCT_ENTRY_setBiosInfo(x,y)\
801 _F_setFunc(x,UserTID,BiosInfo,y)
802 /* 2 ulong U8 8 IdentityTag[I2O_IDENTITY_TAG_SZ]; */
803 #define I2O_LCT_ENTRY_getEventCapabilities(x)\
804 getLU4((&(x)->EventCapabilities),0)
805 #define I2O_LCT_ENTRY_setEventCapabilities(x,y)\
806 setLU4((&(x)->EventCapabilities),0,y)
809 * I2O_PARAM_OPERATIONS_LIST_HEADER
811 #define I2O_PARAM_OPERATIONS_LIST_HEADER_getOperationCount(x)\
812 getLU2((&(x)->OperationCount),0)
813 #define I2O_PARAM_OPERATIONS_LIST_HEADER_setOperationCount(x,y)\
814 setLU2((&(x)->OperationCount),0,y)
815 #define I2O_PARAM_OPERATIONS_LIST_HEADER_getReserved(x)\
816 getLU2((&(x)->Reserved),0)
817 #define I2O_PARAM_OPERATIONS_LIST_HEADER_setReserved(x,y)\
818 setLU2((&(x)->Reserved),0,y)
821 * I2O_PARAM_OPERATION_ALL_TEMPLATE
823 #define I2O_PARAM_OPERATION_ALL_TEMPLATE_getOperation(x)\
824 getLU2((&(x)->Operation),0)
825 #define I2O_PARAM_OPERATION_ALL_TEMPLATE_setOperation(x,y)\
826 setLU2((&(x)->Operation),0,y)
827 #define I2O_PARAM_OPERATION_ALL_TEMPLATE_getGroupNumber(x)\
828 getLU2((&(x)->GroupNumber),0)
829 #define I2O_PARAM_OPERATION_ALL_TEMPLATE_setGroupNumber(x,y)\
830 setLU2((&(x)->GroupNumber),0,y)
831 #define I2O_PARAM_OPERATION_ALL_TEMPLATE_getFieldCount(x)\
832 getLU2((&(x)->FieldCount),0)
833 #define I2O_PARAM_OPERATION_ALL_TEMPLATE_setFieldCount(x,y)\
834 setLU2((&(x)->FieldCount),0,y)
837 * I2O_PARAM_RESULTS_LIST_HEADER
839 #define I2O_PARAM_RESULTS_LIST_HEADER_getResultCount(x)\
840 getLU2((&(x)->ResultCount),0)
841 #define I2O_PARAM_RESULTS_LIST_HEADER_setResultCount(x,y)\
842 setLU2((&(x)->ResultCount),0,y)
843 #define I2O_PARAM_RESULTS_LIST_HEADER_getReserved(x)\
844 getLU2((&(x)->Reserved),0)
845 #define I2O_PARAM_RESULTS_LIST_HEADER_setReserved(x,y)\
846 setLU2((&(x)->Reserved),0,y)
849 * I2O_HBA_ADAPTER_RESET_MESSAGE
854 * I2O_SCSI_DEVICE_RESET_MESSAGE
859 * I2O_HBA_BUS_RESET_MESSAGE
864 * I2O_EXEC_LCT_NOTIFY_MESSAGE
866 /* I2O_MESSAGE_FRAME StdMessageFrame; */
867 /* I2O_TRANSACTION_CONTEXT TransactionContext; */
868 #define I2O_EXEC_LCT_NOTIFY_MESSAGE_getClassIdentifier(x)\
869 getLU4((&(x)->ClassIdentifier),0)
870 #define I2O_EXEC_LCT_NOTIFY_MESSAGE_setClassIdentifier(x,y)\
871 setLU4((&(x)->ClassIdentifier),0,y)
872 #define I2O_EXEC_LCT_NOTIFY_MESSAGE_getLastReportedChangeIndicator(x)\
873 getLU4((&(x)->LastReportedChangeIndicator),0)
874 #define I2O_EXEC_LCT_NOTIFY_MESSAGE_setLastReportedChangeIndicator(x,y)\
875 setLU4((&(x)->LastReportedChangeIndicator),0,y)
876 /* I2O_SG_ELEMENT SGL; */
881 * I2O_UTIL_PARAMS_GET_MESSAGE
883 /* I2O_MESSAGE_FRAME StdMessageFrame; */
884 /* I2O_TRANSACTION_CONTEXT TransactionContext; */
885 #define I2O_UTIL_PARAMS_GET_MESSAGE_getOperationFlags(x)\
886 getLU4((&(x)->OperationFlags),0)
887 #define I2O_UTIL_PARAMS_GET_MESSAGE_setOperationFlags(x,y)\
888 setLU4((&(x)->OperationFlags),0,y)
889 /* I2O_SG_ELEMENT SGL; */
893 * I2O_SCSI_SCB_ABORT_MESSAGE
895 #define I2O_SCSI_SCB_ABORT_MESSAGE_getStdMessageFramePtr(x)\
896 (&((x)->StdMessageFrame))
897 #define I2O_SCSI_SCB_ABORT_MESSAGE_getTransactionContext(x)\
898 (x)->TransactionContext
899 #define I2O_SCSI_SCB_ABORT_MESSAGE_setTransactionContext(x,y)\
900 ((x)->TransactionContext = (y))
901 #define I2O_SCSI_SCB_ABORT_MESSAGE_getTransactionContextToAbort(x)\
902 (x)->TransactionContextToAbort
903 #define I2O_SCSI_SCB_ABORT_MESSAGE_setTransactionContextToAbort(x,y)\
904 ((x)->TransactionContextToAbort = (y))
908 * I2O_DPT_DEVICE_INFO_SCALAR
910 #define I2O_DPT_DEVICE_INFO_SCALAR_getDeviceType(x)\
911 getU1((&(x)->DeviceType),0)
912 #define I2O_DPT_DEVICE_INFO_SCALAR_setDeviceType(x,y)\
913 setU1((&(x)->DeviceType),0,y)
914 #define I2O_DPT_DEVICE_INFO_SCALAR_getFlags(x)\
915 getU1((&(x)->Flags),0)
916 #define I2O_DPT_DEVICE_INFO_SCALAR_setFlags(x,y)\
917 setU1((&(x)->Flags),0,y)
918 #define I2O_DPT_DEVICE_INFO_SCALAR_getBus(x)\
919 getLU2((&(x)->Bus),0)
920 #define I2O_DPT_DEVICE_INFO_SCALAR_setBus(x,y)\
921 setLU2((&(x)->Bus),0,y)
922 #define I2O_DPT_DEVICE_INFO_SCALAR_getIdentifier(x)\
923 getLU4((&(x)->Identifier),0)
924 #define I2O_DPT_DEVICE_INFO_SCALAR_setIdentifier(x,y)\
925 setLU4((&(x)->Identifier),0,y)
926 /* U8 LunInfo[8]; *//* SCSI-2 8-bit scalar LUN goes into offset 1 */
927 #define I2O_DPT_DEVICE_INFO_SCALAR_getLunInfo(x)\
928 getU1((&(x)->LunInfo[0]),1)
929 #define I2O_DPT_DEVICE_INFO_SCALAR_setLunInfo(x,y)\
930 setU1((&(x)->LunInfo[0]),1,y)
933 * I2O_DPT_EXEC_IOP_BUFFERS_SCALAR
935 #define I2O_DPT_EXEC_IOP_BUFFERS_SCALAR_getSerialOutputOffset(x)\
936 getLU4((&(x)->SerialOutputOffset),0)
937 #define I2O_DPT_EXEC_IOP_BUFFERS_SCALAR_getSerialOutputSizet(x)\
938 getLU4((&(x)->SerialOutputSize),0)
939 #define I2O_DPT_EXEC_IOP_BUFFERS_SCALAR_getSerialHeaderSize(x)\
940 getLU4((&(x)->SerialHeaderSize),0)
941 #define I2O_DPT_EXEC_IOP_BUFFERS_SCALAR_getSerialFlagsSupported(x)\
942 getLU4((&(x)->SerialFlagsSupported),0)
945 * I2O_PRIVATE_MESSAGE_FRAME
947 /* typedef struct _I2O_PRIVATE_MESSAGE_FRAME { */
948 /* I2O_MESSAGE_FRAME StdMessageFrame; */
949 /* I2O_TRANSACTION_CONTEXT TransactionContext; */
950 /* U16 XFunctionCode; */
951 /* U16 OrganizationID; */
952 /* PrivatePayload[]; */
953 /* } I2O_PRIVATE_MESSAGE_FRAME, *PI2O_PRIVATE_MESSAGE_FRAME; */
954 #define I2O_PRIVATE_MESSAGE_FRAME_getTransactionContext(x) \
955 (x)->TransactionContext
956 #define I2O_PRIVATE_MESSAGE_FRAME_setTransactionContext(x,y) \
957 ((x)->TransactionContext = (y))
958 #define I2O_PRIVATE_MESSAGE_FRAME_getXFunctionCode(x) \
959 getLU2((&(x)->XFunctionCode),0)
960 #define I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode(x,y) \
961 setLU2((&(x)->XFunctionCode),0,y)
962 #define I2O_PRIVATE_MESSAGE_FRAME_getOrganizationID(x) \
963 getLU2((&(x)->OrganizationID),0)
964 #define I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID(x,y) \
965 setLU2((&(x)->OrganizationID),0,y)
967 typedef struct _PRIVATE_SCSI_SCB_EXECUTE_MESSAGE {
968 I2O_PRIVATE_MESSAGE_FRAME PRIVATE_SCSI_SCB_EXECUTE_MESSAGE;
969 BF TID:16; /* Upper four bits currently are zero */
970 /* Command is interpreted by the host */
972 /* if TRUE, deal with Physical Firmware Array information */
977 I2O_SCB_FLAGS SCBFlags;
978 U8 CDB[ I2O_SCSI_CDB_LENGTH=16 ];
981 } PRIVATE_SCSI_SCB_EXECUTE_MESSAGE, * PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE;
984 * PRIVATE_SCSI_SCB_EXECUTE_MESSAGE
986 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getPRIVATE_SCSI_SCB_EXECUTE_MESSAGEPtr(x)\
987 (&((x)->PRIVATE_SCSI_SCB_EXECUTE_MESSAGE))
988 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getCDBLength(x)\
989 getU1((&(x)->CDBLength),0)
990 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(x,y)\
991 setU1((&(x)->CDBLength),0,y)
992 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getReserved(x)\
993 getU1((&(x)->Reserved),0)
994 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setReserved(x,y)\
995 setU1((&(x)->Reserved),0,y)
996 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getSCBFlags(x)\
997 getLU2((&(x)->SCBFlags),0)
998 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags(x,y)\
999 setLU2((&(x)->SCBFlags),0,y)
1000 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getByteCount(x)\
1001 getLU4((&((x)->ByteCount)),0)
1002 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setByteCount(x,y)\
1003 setLU4((&((x)->ByteCount)),0,y)
1004 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getTID(x)\
1005 _F_get16bit(x,TID,0,TID)
1006 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setTID(x,y)\
1007 _F_set16bit(x,TID,0,TID,y)
1008 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getInterpret(x)\
1009 _F_get1bit(x,TID,2,Interpret)
1010 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setInterpret(x,y)\
1011 _F_set1bit(x,TID,2,Interpret,y)
1012 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getPhysical(x)\
1013 _F_get1bit1(x,TID,2,Physical)
1014 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setPhysical(x,y)\
1015 _F_set1bit1(x,TID,2,Physical,y)
1016 #define PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getCDBPtr(x)\
1021 * PRIVATE_FLASH_REGION_MESSAGE
1023 #define PRIVATE_FLASH_REGION_MESSAGE_getFlashRegion(x) \
1024 getLU4((&((x)->FlashRegion)),0)
1025 #define PRIVATE_FLASH_REGION_MESSAGE_setFlashRegion(x,y) \
1026 setLU4((&((x)->FlashRegion)),0,y)
1027 #define PRIVATE_FLASH_REGION_MESSAGE_getRegionOffset(x) \
1028 getLU4((&((x)->RegionOffset)),0)
1029 #define PRIVATE_FLASH_REGION_MESSAGE_setRegionOffset(x,y) \
1030 setLU4((&((x)->RegionOffset)),0,y)
1031 #define PRIVATE_FLASH_REGION_MESSAGE_getByteCount(x) \
1032 getLU4((&((x)->ByteCount)),0)
1033 #define PRIVATE_FLASH_REGION_MESSAGE_setByteCount(x,y) \
1034 setLU4((&((x)->ByteCount)),0,y)
1037 * I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR
1039 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getSCSIType(x)\
1040 getU1((&(x)->SCSIType),0)
1041 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_setSCSIType(x,y)\
1042 setU1((&(x)->SCSIType),0,y)
1043 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getProtectionManagement(x)\
1044 getU1((&(x)->ProtectionManagement),0)
1045 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_setProtectionManagement(x,y)\
1046 setU1((&(x)->ProtectionManagement),0,y)
1047 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getSettings(x)\
1048 getU1((&(x)->Settings),0)
1049 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_setSettings(x,y)\
1050 setU1((&(x)->Settings),0,y)
1051 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getReserved1(x)\
1052 getU1((&(x)->Reserved1),0)
1053 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_setReserved1(x,y)\
1054 setU1((&(x)->Reserved1),0,y)
1055 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getInitiatorID(x)\
1056 getLU4((&(x)->InitiatorID),0)
1057 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_setInitiatorID(x,y)\
1058 setLU4((&(x)->InitiatorID),0,y)
1059 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getScanLun0Only(x)\
1060 getLU4((&(x)->ScanLun0Only),0)
1061 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_setScanLun0Only(x,y)\
1062 setLU4((&(x)->ScanLun0Only),0,y)
1063 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getDisableDevice(x)\
1064 getLU2((&(x)->DisableDevice),0)
1065 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_setDisableDevice(x,y)\
1066 setLU2((&(x)->DisableDevice),0,y)
1067 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getMaxOffset(x)\
1068 getU1((&(x)->MaxOffset),0)
1069 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_setMaxOffset(x,y)\
1070 setU1((&(x)->MaxOffset),0,y)
1071 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getMaxDataWidth(x)\
1072 getU1((&(x)->MaxDataWidth),0)
1073 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_setMaxDataWidth(x,y)\
1074 setU1((&(x)->MaxDataWidth),0,y)
1075 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getMaxSyncRate(x)\
1076 getLU4((&(x)->MaxSyncRate),0)
1077 #define I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_setMaxSyncRate(x,y)\
1078 setLU4((&(x)->MaxSyncRate),0,y)
1081 * I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME
1083 #define I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getStdReplyFramePtr(x)\
1084 (&((x)->StdReplyFrame))
1085 #define I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getTransferCount(x)\
1086 getLU4((&(x)->TransferCount),0)
1087 #define I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_setTransferCount(x,y)\
1088 setLU4((&(x)->TransferCount),0,y)
1089 #define I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getAutoSenseTransferCount(x)\
1090 getLU4((&(x)->AutoSenseTransferCount),0)
1091 #define I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_setAutoSenseTransferCount(x,y)\
1092 setLU4((&(x)->AutoSenseTransferCount),0,y)
1095 * I2O_SINGLE_REPLY_MESSAGE_FRAME
1097 #define I2O_SINGLE_REPLY_MESSAGE_FRAME_getStdMessageFramePtr(x)\
1098 (&((x)->StdMessageFrame))
1099 #define I2O_SINGLE_REPLY_MESSAGE_FRAME_getTransactionContext(x)\
1100 (x)->TransactionContext
1101 #define I2O_SINGLE_REPLY_MESSAGE_FRAME_setTransactionContext(x,y)\
1102 ((x)->TransactionContext = (y))
1103 #define I2O_SINGLE_REPLY_MESSAGE_FRAME_getDetailedStatusCode(x)\
1104 getLU2((&((x)->DetailedStatusCode)),0)
1105 #define I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode(x,y)\
1106 setLU2((&((x)->DetailedStatusCode)),0,y)
1107 #define I2O_SINGLE_REPLY_MESSAGE_FRAME_getreserved(x)\
1108 getU1((&((x)->reserved)),0)
1109 #define I2O_SINGLE_REPLY_MESSAGE_FRAME_setreserved(x,y)\
1110 setU1((&((x)->reserved)),0,y)
1111 #define I2O_SINGLE_REPLY_MESSAGE_FRAME_getReqStatus(x)\
1112 getU1((&((x)->ReqStatus)),0)
1113 #define I2O_SINGLE_REPLY_MESSAGE_FRAME_setReqStatus(x,y)\
1114 setU1((&((x)->ReqStatus)),0,y)
1118 * I2O_SCSI_SCB_EXECUTE_MESSAGE
1120 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_getStdMessageFramePtr(x)\
1121 (&((x)->StdMessageFrame))
1122 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_getTransactionContext(x)\
1123 (x)->TransactionContext
1124 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_setTransactionContext(x,y)\
1125 ((x)->TransactionContext = (y))
1126 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_getCDBLength(x)\
1127 getU1((&((x)->CDBLength)),0)
1128 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(x,y)\
1129 setU1((&((x)->CDBLength)),0,y)
1130 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_getReserved(x)\
1131 getU1((&((x)->Reserved)),0)
1132 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_setReserved(x,y)\
1133 setU1((&((x)->Reserved)),0,y)
1134 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_getSCBFlags(x)\
1135 getLU2((&((x)->SCBFlags)),0)
1136 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags(x,y)\
1137 setLU2((&((x)->SCBFlags)),0,y)
1138 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_getByteCount(x)\
1139 getLU2((&((x)->ByteCount)),0)
1140 #define I2O_SCSI_SCB_EXECUTE_MESSAGE_setByteCount(x,y)\
1141 setLU2((&((x)->ByteCount)),0,y)
1142 /* define for these */
1144 /* I2O_SG_ELEMENT SGL; */
1148 * I2O_FAILURE_REPLY_MESSAGE_FRAME
1150 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_getStdMessageFramePtr(x)\
1151 (&((x)->StdMessageFrame))
1152 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_getTransactionContext(x)\
1153 (x)->TransactionContext
1154 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_setTransactionContext(x,y)\
1155 ((x)->TransactionContext = (y))
1156 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_getLowestVersion(x)\
1157 getU1((&((x)->LowestVersion)),0)
1158 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_setLowestVersion(x,y)\
1159 setU1((&((x)->LowestVersion)),0,y)
1160 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_getHighestVersion(x)\
1161 getU1((&((x)->HighestVersion)),0)
1162 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_setHighestVersion(x,y)\
1163 setU1((&((x)->HighestVersion)),0,y)
1164 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_getAgeLimit(x)\
1165 getLU4((&((x)->AgeLimit)),0)
1166 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_setAgeLimit(x,y)\
1167 setLU4((&((x)->AgeLimit)),0,y)
1168 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_getSeverity(x)\
1169 _F_get8bit(x,Severity,0,Severity)
1170 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_setSeverity(x,y)\
1171 _F_set8bit(x,Severity,0,Severity,y)
1172 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_getFailureCode(x)\
1173 _F_get8bit(x,Severity,1,FailureCode)
1174 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_setFailureCode(x,y)\
1175 _F_get8bit(x,Severity,1,FailureCode,y)
1177 * #define I2O_FAILURE_REPLY_MESSAGE_FRAME_getFailingHostUnitID(x)\
1178 * _F_get16bit(x,reserved,1,FailingHostUnitID)
1179 * #define I2O_FAILURE_REPLY_MESSAGE_FRAME_setFailingHostUnitID(x,y)\
1180 * _F_set16bit(x,reserved,1,FailingHostUnitID,y)
1182 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_getPreservedMFA(x)\
1183 getLU4((&((x)->PreservedMFA)),0)
1184 #define I2O_FAILURE_REPLY_MESSAGE_FRAME_setPreservedMFA(x,y)\
1185 setLU4((&((x)->PreservedMFA)),0,y)
1190 * I2O_EXEC_STATUS_GET_REPLY
1192 #define I2O_EXEC_STATUS_GET_REPLY_getOrganizationID(x)\
1193 getLU2((&(x)->OrganizationID),0)
1194 #define I2O_EXEC_STATUS_GET_REPLY_setOrganizationID(x,y)\
1195 setLU2((&(x)->OrganizationID),0,y)
1196 /* #define I2O_EXEC_STATUS_GET_REPLY_getreserved; */
1197 #define I2O_EXEC_STATUS_GET_REPLY_getIOP_ID(x)\
1198 _F_get12bit(x,IOP_ID,0,IOP_ID)
1199 #define I2O_EXEC_STATUS_GET_REPLY_setIOP_ID(x,y)\
1200 _F_set12bit(x,IOP_ID,0,IOP_ID,y)
1201 /* #define I2O_EXEC_STATUS_GET_REPLY_getreserved1(x) */
1202 #define I2O_EXEC_STATUS_GET_REPLY_getHostUnitID(x)\
1203 _F_get16bit(x,IOP_ID,2,HostUnitID)
1204 #define I2O_EXEC_STATUS_GET_REPLY_setHostUnitID(x,y)\
1205 _F_set16bit(x,IOP_ID,2,HostUnitID,y)
1206 #define I2O_EXEC_STATUS_GET_REPLY_getSegmentNumber(x)\
1207 _F_get12bit(x,SegmentNumber,0,SegmentNumber)
1208 #define I2O_EXEC_STATUS_GET_REPLY_setSegmentNumber(x,y)\
1209 _F_set12bit(x,SegmentNumber,0,SegmentNumber,y)
1210 #define I2O_EXEC_STATUS_GET_REPLY_getI2oVersion(x)\
1211 _F_get4bit4(x,SegmentNumber,1,I2oVersion)
1212 #define I2O_EXEC_STATUS_GET_REPLY_setI2oVersion(x,y)\
1213 _F_set4bit4(x,SegmentNumber,1,I2oVersion,y)
1214 #define I2O_EXEC_STATUS_GET_REPLY_getIopState(x)\
1215 _F_get8bit(x,SegmentNumver,2,IopState)
1216 #define I2O_EXEC_STATUS_GET_REPLY_setIopState(x,y)\
1217 _F_set8bit(x,SegmentNumver,2,IopState,y)
1218 #define I2O_EXEC_STATUS_GET_REPLY_getMessengerType(x)\
1219 _F_get8bit(x,SegmentNumber,3,MessengerType)
1220 #define I2O_EXEC_STATUS_GET_REPLY_setMessengerType(x,y)\
1221 _F_get8bit(x,SegmentNumber,3,MessengerType,y)
1222 #define I2O_EXEC_STATUS_GET_REPLY_getInboundMFrameSize(x)\
1223 getLU2((&(x)->InboundMFrameSize),0)
1224 #define I2O_EXEC_STATUS_GET_REPLY_setInboundMFrameSize(x,y)\
1225 setLU2((&(x)->InboundMFrameSize),0,y)
1226 #define I2O_EXEC_STATUS_GET_REPLY_getInitCode(x)\
1227 getU1((&(x)->InitCode),0)
1228 #define I2O_EXEC_STATUS_GET_REPLY_setInitCode(x,y)\
1229 setU1((&(x)->InitCode),0,y)
1230 /* #define I2O_EXEC_STATUS_GET_REPLY_getreserved2(x) */
1231 #define I2O_EXEC_STATUS_GET_REPLY_getMaxInboundMFrames(x)\
1232 getLU4((&(x)->MaxInboundMFrames),0)
1233 #define I2O_EXEC_STATUS_GET_REPLY_setMaxInboundMFrames(x,y)\
1234 setLU4((&(x)->MaxInboundMFrames),0,y)
1235 #define I2O_EXEC_STATUS_GET_REPLY_getCurrentInboundMFrames(x)\
1236 getLU4((&(x)->CurrentInboundMFrames),0)
1237 #define I2O_EXEC_STATUS_GET_REPLY_setCurrentInboundMFrames(x,y)\
1238 setLU4((&(x)->CurrentInboundMFrames),0,y)
1239 #define I2O_EXEC_STATUS_GET_REPLY_getMaxOutboundMFrames(x)\
1240 getLU4((&(x)->MaxOutboundMFrames),0)
1241 #define I2O_EXEC_STATUS_GET_REPLY_setMaxOutboundMFrames(x,y)\
1242 setLU4((&(x)->MaxOutboundMFrames),0,y)
1243 /* #define I2O_EXEC_STATUS_GET_REPLY_getProductIDString(x) */
1244 #define I2O_EXEC_STATUS_GET_REPLY_getExpectedLCTSize(x)\
1245 getLU4((&(x)->ExpectedLCTSize),0)
1246 #define I2O_EXEC_STATUS_GET_REPLY_setExpectedLCTSize(x,y)\
1247 setLU4((&(x)->ExpectedLCTSize),0,y)
1248 #define I2O_EXEC_STATUS_GET_REPLY_getIopCapabilities(x)\
1249 getLU4((&(x)->IopCapabilities),0)
1250 #define I2O_EXEC_STATUS_GET_REPLY_setIopCapabilities(x,y)\
1251 setLU4((&(x)->IopCapabilities),0,y)
1252 #define I2O_EXEC_STATUS_GET_REPLY_getDesiredPrivateMemSize(x)\
1253 getLU4((&(x)->DesiredPrivateMemSize),0)
1254 #define I2O_EXEC_STATUS_GET_REPLY_setDesiredPrivateMemSize(x,y)\
1255 setLU4((&(x)->DesiredPrivateMemSize),0,y)
1256 #define I2O_EXEC_STATUS_GET_REPLY_getCurrentPrivateMemSize(x)\
1257 getLU4((&(x)->CurrentPrivateMemSize),0)
1258 #define I2O_EXEC_STATUS_GET_REPLY_setCurrentPrivateMemSize(x,y)\
1259 setLU4((&(x)->CurrentPrivateMemSize),0,y)
1260 #define I2O_EXEC_STATUS_GET_REPLY_getCurrentPrivateMemBase(x)\
1261 getLU4((&(x)->CurrentPrivateMemBase),0)
1262 #define I2O_EXEC_STATUS_GET_REPLY_setCurrentPrivateMemBase(x,y)\
1263 setLU4((&(x)->CurrentPrivateMemBase),0,y)
1264 #define I2O_EXEC_STATUS_GET_REPLY_getDesiredPrivateIOSize(x)\
1265 getLU4((&(x)->DesiredPrivateIOSize),0)
1266 #define I2O_EXEC_STATUS_GET_REPLY_setDesiredPrivateIOSize(x,y)\
1267 setLU4((&(x)->DesiredPrivateIOSize),0,y)
1268 #define I2O_EXEC_STATUS_GET_REPLY_getCurrentPrivateIOSize(x)\
1269 getLU4((&(x)->CurrentPrivateIOSize),0)
1270 #define I2O_EXEC_STATUS_GET_REPLY_setCurrentPrivateIOSize(x,y)\
1271 setLU4((&(x)->CurrentPrivateIOSize),0,y)
1272 #define I2O_EXEC_STATUS_GET_REPLY_getCurrentPrivateIOBase(x)\
1273 getLU4((&(x)->CurrentPrivateIOBase),0)
1274 #define I2O_EXEC_STATUS_GET_REPLY_setCurrentPrivateIOBase(x,y)\
1275 setLU4((&(x)->CurrentPrivateIOBase),0,y)
1276 /* #define I2O_EXEC_STATUS_GET_REPLY_getreserved3(x) */
1277 #define I2O_EXEC_STATUS_GET_REPLY_getSyncByte(x)\
1278 getU1((&(x)->SyncByte),0)
1279 #define I2O_EXEC_STATUS_GET_REPLY_setSyncByte(x,y)\
1280 setU1((&(x)->SyncByte),0,y)
1285 * I2O_HBA_BUS_QUIESCE_MESSAGE
1287 #define I2O_HBA_BUS_QUIESCE_MESSAGE_getStdMessageFramePtr(x)\
1288 (&((x)->StdMessageFrame))
1289 #define I2O_HBA_BUS_QUIESCE_MESSAGE_getTransactionContext(x)\
1290 getBU4((&((x)->TransactionContext)),0)
1291 #define I2O_HBA_BUS_QUIESCE_MESSAGE_setTransactionContext(x,y)\
1292 setBU4((&((x)->TransactionContext)),0,y)
1293 #define I2O_HBA_BUS_QUIESCE_MESSAGE_getFlags(x)\
1294 getLU4((&(x)->Flags),0)
1295 #define I2O_HBA_BUS_QUIESCE_MESSAGE_setFlags(x,y)\
1296 setLU4((&(x)->Flags),0,y)
1299 #endif /* __INCi2odeph */