2 * Copyright (c) 1997, 1998, 1999
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
32 * $FreeBSD: src/sys/pci/if_dcreg.h,v 1.4.2.22 2003/06/07 16:55:35 mbr Exp $
33 * $DragonFly: src/sys/dev/netif/dc/if_dcreg.h,v 1.10 2006/04/30 02:02:06 sephe Exp $
37 * 21143 and clone common register definitions.
40 #define DC_BUSCTL 0x00 /* bus control */
41 #define DC_TXSTART 0x08 /* tx start demand */
42 #define DC_RXSTART 0x10 /* rx start demand */
43 #define DC_RXADDR 0x18 /* rx descriptor list start addr */
44 #define DC_TXADDR 0x20 /* tx descriptor list start addr */
45 #define DC_ISR 0x28 /* interrupt status register */
46 #define DC_NETCFG 0x30 /* network config register */
47 #define DC_IMR 0x38 /* interrupt mask */
48 #define DC_FRAMESDISCARDED 0x40 /* # of discarded frames */
49 #define DC_SIO 0x48 /* MII and ROM/EEPROM access */
50 #define DC_ROM 0x50 /* ROM programming address */
51 #define DC_TIMER 0x58 /* general timer */
52 #define DC_10BTSTAT 0x60 /* SIA status */
53 #define DC_SIARESET 0x68 /* SIA connectivity */
54 #define DC_10BTCTRL 0x70 /* SIA transmit and receive */
55 #define DC_WATCHDOG 0x78 /* SIA and general purpose port */
56 #define DC_SIAGP 0x78 /* SIA and general purpose port (X3201) */
59 * There are two general 'types' of MX chips that we need to be
60 * concerned with. One is the original 98713, which has its internal
61 * NWAY support controlled via the MDIO bits in the serial I/O
62 * register. The other is everything else (from the 98713A on up),
63 * which has its internal NWAY controlled via CSR13, CSR14 and CSR15,
64 * just like the 21143. This type setting also governs which of the
65 * 'magic' numbers we write to CSR16. The PNIC II falls into the
66 * 98713A/98715/98715A/98725 category.
68 #define DC_TYPE_98713 0x1
69 #define DC_TYPE_98713A 0x2
70 #define DC_TYPE_987x5 0x3
72 /* Other type of supported chips. */
73 #define DC_TYPE_21143 0x4 /* Intel 21143 */
74 #define DC_TYPE_ASIX 0x5 /* ASIX AX88140A/AX88141 */
75 #define DC_TYPE_AL981 0x6 /* ADMtek AL981 Comet */
76 #define DC_TYPE_AN985 0x7 /* ADMtek AN985 Centaur */
77 #define DC_TYPE_DM9102 0x8 /* Davicom DM9102 */
78 #define DC_TYPE_PNICII 0x9 /* 82c115 PNIC II */
79 #define DC_TYPE_PNIC 0xA /* 82c168/82c169 PNIC I */
80 #define DC_TYPE_XIRCOM 0xB /* Xircom X3201 */
81 #define DC_TYPE_CONEXANT 0xC /* Conexant LANfinity RS7112 */
83 #define DC_IS_MACRONIX(x) \
84 (x->dc_type == DC_TYPE_98713 || \
85 x->dc_type == DC_TYPE_98713A || \
86 x->dc_type == DC_TYPE_987x5)
88 #define DC_IS_ADMTEK(x) \
89 (x->dc_type == DC_TYPE_AL981 || \
90 x->dc_type == DC_TYPE_AN985)
92 #define DC_IS_INTEL(x) (x->dc_type == DC_TYPE_21143)
93 #define DC_IS_ASIX(x) (x->dc_type == DC_TYPE_ASIX)
94 #define DC_IS_COMET(x) (x->dc_type == DC_TYPE_AL981)
95 #define DC_IS_CENTAUR(x) (x->dc_type == DC_TYPE_AN985)
96 #define DC_IS_DAVICOM(x) (x->dc_type == DC_TYPE_DM9102)
97 #define DC_IS_PNICII(x) (x->dc_type == DC_TYPE_PNICII)
98 #define DC_IS_PNIC(x) (x->dc_type == DC_TYPE_PNIC)
99 #define DC_IS_XIRCOM(x) (x->dc_type == DC_TYPE_XIRCOM)
100 #define DC_IS_CONEXANT(x) (x->dc_type == DC_TYPE_CONEXANT)
102 /* MII/symbol mode port types */
103 #define DC_PMODE_MII 0x1
104 #define DC_PMODE_SYM 0x2
105 #define DC_PMODE_SIA 0x3
110 #define DC_BUSCTL_RESET 0x00000001
111 #define DC_BUSCTL_ARBITRATION 0x00000002
112 #define DC_BUSCTL_SKIPLEN 0x0000007C
113 #define DC_BUSCTL_BUF_BIGENDIAN 0x00000080
114 #define DC_BUSCTL_BURSTLEN 0x00003F00
115 #define DC_BUSCTL_CACHEALIGN 0x0000C000
116 #define DC_BUSCTL_TXPOLL 0x000E0000
117 #define DC_BUSCTL_DBO 0x00100000
118 #define DC_BUSCTL_MRME 0x00200000
119 #define DC_BUSCTL_MRLE 0x00800000
120 #define DC_BUSCTL_MWIE 0x01000000
121 #define DC_BUSCTL_ONNOW_ENB 0x04000000
123 #define DC_SKIPLEN_1LONG 0x00000004
124 #define DC_SKIPLEN_2LONG 0x00000008
125 #define DC_SKIPLEN_3LONG 0x00000010
126 #define DC_SKIPLEN_4LONG 0x00000020
127 #define DC_SKIPLEN_5LONG 0x00000040
129 #define DC_CACHEALIGN_NONE 0x00000000
130 #define DC_CACHEALIGN_8LONG 0x00004000
131 #define DC_CACHEALIGN_16LONG 0x00008000
132 #define DC_CACHEALIGN_32LONG 0x0000C000
134 #define DC_BURSTLEN_USECA 0x00000000
135 #define DC_BURSTLEN_1LONG 0x00000100
136 #define DC_BURSTLEN_2LONG 0x00000200
137 #define DC_BURSTLEN_4LONG 0x00000400
138 #define DC_BURSTLEN_8LONG 0x00000800
139 #define DC_BURSTLEN_16LONG 0x00001000
140 #define DC_BURSTLEN_32LONG 0x00002000
142 #define DC_TXPOLL_OFF 0x00000000
143 #define DC_TXPOLL_1 0x00020000
144 #define DC_TXPOLL_2 0x00040000
145 #define DC_TXPOLL_3 0x00060000
146 #define DC_TXPOLL_4 0x00080000
147 #define DC_TXPOLL_5 0x000A0000
148 #define DC_TXPOLL_6 0x000C0000
149 #define DC_TXPOLL_7 0x000E0000
152 * Interrupt status bits.
154 #define DC_ISR_TX_OK 0x00000001
155 #define DC_ISR_TX_IDLE 0x00000002
156 #define DC_ISR_TX_NOBUF 0x00000004
157 #define DC_ISR_TX_JABBERTIMEO 0x00000008
158 #define DC_ISR_LINKGOOD 0x00000010
159 #define DC_ISR_TX_UNDERRUN 0x00000020
160 #define DC_ISR_RX_OK 0x00000040
161 #define DC_ISR_RX_NOBUF 0x00000080
162 #define DC_ISR_RX_READ 0x00000100
163 #define DC_ISR_RX_WATDOGTIMEO 0x00000200
164 #define DC_ISR_TX_EARLY 0x00000400
165 #define DC_ISR_TIMER_EXPIRED 0x00000800
166 #define DC_ISR_LINKFAIL 0x00001000
167 #define DC_ISR_BUS_ERR 0x00002000
168 #define DC_ISR_RX_EARLY 0x00004000
169 #define DC_ISR_ABNORMAL 0x00008000
170 #define DC_ISR_NORMAL 0x00010000
171 #define DC_ISR_RX_STATE 0x000E0000
172 #define DC_ISR_TX_STATE 0x00700000
173 #define DC_ISR_BUSERRTYPE 0x03800000
174 #define DC_ISR_100MBPSLINK 0x08000000
175 #define DC_ISR_MAGICKPACK 0x10000000
177 #define DC_RXSTATE_STOPPED 0x00000000 /* 000 - Stopped */
178 #define DC_RXSTATE_FETCH 0x00020000 /* 001 - Fetching descriptor */
179 #define DC_RXSTATE_ENDCHECK 0x00040000 /* 010 - check for rx end */
180 #define DC_RXSTATE_WAIT 0x00060000 /* 011 - waiting for packet */
181 #define DC_RXSTATE_SUSPEND 0x00080000 /* 100 - suspend rx */
182 #define DC_RXSTATE_CLOSE 0x000A0000 /* 101 - close tx desc */
183 #define DC_RXSTATE_FLUSH 0x000C0000 /* 110 - flush from FIFO */
184 #define DC_RXSTATE_DEQUEUE 0x000E0000 /* 111 - dequeue from FIFO */
186 #define DC_TXSTATE_RESET 0x00000000 /* 000 - reset */
187 #define DC_TXSTATE_FETCH 0x00100000 /* 001 - fetching descriptor */
188 #define DC_TXSTATE_WAITEND 0x00200000 /* 010 - wait for tx end */
189 #define DC_TXSTATE_READING 0x00300000 /* 011 - read and enqueue */
190 #define DC_TXSTATE_RSVD 0x00400000 /* 100 - reserved */
191 #define DC_TXSTATE_SETUP 0x00500000 /* 101 - setup packet */
192 #define DC_TXSTATE_SUSPEND 0x00600000 /* 110 - suspend tx */
193 #define DC_TXSTATE_CLOSE 0x00700000 /* 111 - close tx desc */
196 * Network config bits.
198 #define DC_NETCFG_RX_HASHPERF 0x00000001
199 #define DC_NETCFG_RX_ON 0x00000002
200 #define DC_NETCFG_RX_HASHONLY 0x00000004
201 #define DC_NETCFG_RX_BADFRAMES 0x00000008
202 #define DC_NETCFG_RX_INVFILT 0x00000010
203 #define DC_NETCFG_BACKOFFCNT 0x00000020
204 #define DC_NETCFG_RX_PROMISC 0x00000040
205 #define DC_NETCFG_RX_ALLMULTI 0x00000080
206 #define DC_NETCFG_FULLDUPLEX 0x00000200
207 #define DC_NETCFG_LOOPBACK 0x00000C00
208 #define DC_NETCFG_FORCECOLL 0x00001000
209 #define DC_NETCFG_TX_ON 0x00002000
210 #define DC_NETCFG_TX_THRESH 0x0000C000
211 #define DC_NETCFG_TX_BACKOFF 0x00020000
212 #define DC_NETCFG_PORTSEL 0x00040000 /* 0 == 10, 1 == 100 */
213 #define DC_NETCFG_HEARTBEAT 0x00080000
214 #define DC_NETCFG_STORENFWD 0x00200000
215 #define DC_NETCFG_SPEEDSEL 0x00400000 /* 1 == 10, 0 == 100 */
216 #define DC_NETCFG_PCS 0x00800000
217 #define DC_NETCFG_SCRAMBLER 0x01000000
218 #define DC_NETCFG_NO_RXCRC 0x02000000
219 #define DC_NETCFG_RX_ALL 0x40000000
220 #define DC_NETCFG_CAPEFFECT 0x80000000
222 #define DC_OPMODE_NORM 0x00000000
223 #define DC_OPMODE_INTLOOP 0x00000400
224 #define DC_OPMODE_EXTLOOP 0x00000800
227 #define DC_TXTHRESH_72BYTES 0x00000000
228 #define DC_TXTHRESH_96BYTES 0x00004000
229 #define DC_TXTHRESH_128BYTES 0x00008000
230 #define DC_TXTHRESH_160BYTES 0x0000C000
233 #define DC_TXTHRESH_MIN 0x00000000
234 #define DC_TXTHRESH_INC 0x00004000
235 #define DC_TXTHRESH_MAX 0x0000C000
239 * Interrupt mask bits.
241 #define DC_IMR_TX_OK 0x00000001
242 #define DC_IMR_TX_IDLE 0x00000002
243 #define DC_IMR_TX_NOBUF 0x00000004
244 #define DC_IMR_TX_JABBERTIMEO 0x00000008
245 #define DC_IMR_LINKGOOD 0x00000010
246 #define DC_IMR_TX_UNDERRUN 0x00000020
247 #define DC_IMR_RX_OK 0x00000040
248 #define DC_IMR_RX_NOBUF 0x00000080
249 #define DC_IMR_RX_READ 0x00000100
250 #define DC_IMR_RX_WATDOGTIMEO 0x00000200
251 #define DC_IMR_TX_EARLY 0x00000400
252 #define DC_IMR_TIMER_EXPIRED 0x00000800
253 #define DC_IMR_LINKFAIL 0x00001000
254 #define DC_IMR_BUS_ERR 0x00002000
255 #define DC_IMR_RX_EARLY 0x00004000
256 #define DC_IMR_ABNORMAL 0x00008000
257 #define DC_IMR_NORMAL 0x00010000
258 #define DC_IMR_100MBPSLINK 0x08000000
259 #define DC_IMR_MAGICKPACK 0x10000000
262 (DC_IMR_RX_OK|DC_IMR_TX_OK|DC_IMR_RX_NOBUF|DC_IMR_RX_WATDOGTIMEO|\
263 DC_IMR_TX_NOBUF|DC_IMR_TX_UNDERRUN|DC_IMR_BUS_ERR| \
264 DC_IMR_ABNORMAL|DC_IMR_NORMAL/*|DC_IMR_TX_EARLY*/)
266 * Serial I/O (EEPROM/ROM) bits.
268 #define DC_SIO_EE_CS 0x00000001 /* EEPROM chip select */
269 #define DC_SIO_EE_CLK 0x00000002 /* EEPROM clock */
270 #define DC_SIO_EE_DATAIN 0x00000004 /* EEPROM data output */
271 #define DC_SIO_EE_DATAOUT 0x00000008 /* EEPROM data input */
272 #define DC_SIO_ROMDATA4 0x00000010
273 #define DC_SIO_ROMDATA5 0x00000020
274 #define DC_SIO_ROMDATA6 0x00000040
275 #define DC_SIO_ROMDATA7 0x00000080
276 #define DC_SIO_EESEL 0x00000800
277 #define DC_SIO_ROMSEL 0x00001000
278 #define DC_SIO_ROMCTL_WRITE 0x00002000
279 #define DC_SIO_ROMCTL_READ 0x00004000
280 #define DC_SIO_MII_CLK 0x00010000 /* MDIO clock */
281 #define DC_SIO_MII_DATAOUT 0x00020000 /* MDIO data out */
282 #define DC_SIO_MII_DIR 0x00040000 /* MDIO dir */
283 #define DC_SIO_MII_DATAIN 0x00080000 /* MDIO data in */
285 #define DC_EECMD_WRITE 0x140
286 #define DC_EECMD_READ 0x180
287 #define DC_EECMD_ERASE 0x1c0
289 #define DC_EE_NODEADDR_OFFSET 0x70
290 #define DC_EE_NODEADDR 10
293 * General purpose timer register
295 #define DC_TIMER_VALUE 0x0000FFFF
296 #define DC_TIMER_CONTINUOUS 0x00010000
299 * 10baseT status register
301 #define DC_TSTAT_MIIACT 0x00000001 /* MII port activity */
302 #define DC_TSTAT_LS100 0x00000002 /* link status of 100baseTX */
303 #define DC_TSTAT_LS10 0x00000004 /* link status of 10baseT */
304 #define DC_TSTAT_AUTOPOLARITY 0x00000008
305 #define DC_TSTAT_AUIACT 0x00000100 /* AUI activity */
306 #define DC_TSTAT_10BTACT 0x00000200 /* 10baseT activity */
307 #define DC_TSTAT_NSN 0x00000400 /* non-stable FLPs detected */
308 #define DC_TSTAT_REMFAULT 0x00000800
309 #define DC_TSTAT_ANEGSTAT 0x00007000
310 #define DC_TSTAT_LP_CAN_NWAY 0x00008000 /* link partner supports NWAY */
311 #define DC_TSTAT_LPCODEWORD 0xFFFF0000 /* link partner's code word */
313 #define DC_ASTAT_DISABLE 0x00000000
314 #define DC_ASTAT_TXDISABLE 0x00001000
315 #define DC_ASTAT_ABDETECT 0x00002000
316 #define DC_ASTAT_ACKDETECT 0x00003000
317 #define DC_ASTAT_CMPACKDETECT 0x00004000
318 #define DC_ASTAT_AUTONEGCMP 0x00005000
319 #define DC_ASTAT_LINKCHECK 0x00006000
324 #define DC_SIA_RESET 0x00000001
325 #define DC_SIA_AUI 0x00000008 /* AUI or 10baseT */
328 * 10baseT control register
330 #define DC_TCTL_ENCODER_ENB 0x00000001
331 #define DC_TCTL_LOOPBACK 0x00000002
332 #define DC_TCTL_DRIVER_ENB 0x00000004
333 #define DC_TCTL_LNKPULSE_ENB 0x00000008
334 #define DC_TCTL_HALFDUPLEX 0x00000040
335 #define DC_TCTL_AUTONEGENBL 0x00000080
336 #define DC_TCTL_RX_SQUELCH 0x00000100
337 #define DC_TCTL_COLL_SQUELCH 0x00000200
338 #define DC_TCTL_COLL_DETECT 0x00000400
339 #define DC_TCTL_SQE_ENB 0x00000800
340 #define DC_TCTL_LINKTEST 0x00001000
341 #define DC_TCTL_AUTOPOLARITY 0x00002000
342 #define DC_TCTL_SET_POL_PLUS 0x00004000
343 #define DC_TCTL_AUTOSENSE 0x00008000 /* 10bt/AUI autosense */
344 #define DC_TCTL_100BTXHALF 0x00010000
345 #define DC_TCTL_100BTXFULL 0x00020000
346 #define DC_TCTL_100BT4 0x00040000
349 * Watchdog timer register
351 #define DC_WDOG_JABBERDIS 0x00000001
352 #define DC_WDOG_HOSTUNJAB 0x00000002
353 #define DC_WDOG_JABBERCLK 0x00000004
354 #define DC_WDOG_RXWDOGDIS 0x00000010
355 #define DC_WDOG_RXWDOGCLK 0x00000020
356 #define DC_WDOG_MUSTBEZERO 0x00000100
357 #define DC_WDOG_AUIBNC 0x00100000
358 #define DC_WDOG_ACTIVITY 0x00200000
359 #define DC_WDOG_RX_MATCH 0x00400000
360 #define DC_WDOG_LINK 0x00800000
361 #define DC_WDOG_CTLWREN 0x08000000
364 * SIA and General Purpose Port register (X3201)
366 #define DC_SIAGP_RXMATCH 0x40000000
367 #define DC_SIAGP_INT1 0x20000000
368 #define DC_SIAGP_INT0 0x10000000
369 #define DC_SIAGP_WRITE_EN 0x08000000
370 #define DC_SIAGP_RXMATCH_EN 0x04000000
371 #define DC_SIAGP_INT1_EN 0x02000000
372 #define DC_SIAGP_INT0_EN 0x01000000
373 #define DC_SIAGP_LED3 0x00800000
374 #define DC_SIAGP_LED2 0x00400000
375 #define DC_SIAGP_LED1 0x00200000
376 #define DC_SIAGP_LED0 0x00100000
377 #define DC_SIAGP_MD_GP3_OUTPUT 0x00080000
378 #define DC_SIAGP_MD_GP2_OUTPUT 0x00040000
379 #define DC_SIAGP_MD_GP1_OUTPUT 0x00020000
380 #define DC_SIAGP_MD_GP0_OUTPUT 0x00010000
383 * Size of a setup frame.
385 #define DC_SFRAME_LEN 192
388 * 21x4x TX/RX list structure.
398 #define dc_data dc_ptr1
399 #define dc_next dc_ptr2
401 #define DC_RXSTAT_FIFOOFLOW 0x00000001
402 #define DC_RXSTAT_CRCERR 0x00000002
403 #define DC_RXSTAT_DRIBBLE 0x00000004
404 #define DC_RXSTAT_MIIERE 0x00000008
405 #define DC_RXSTAT_WATCHDOG 0x00000010
406 #define DC_RXSTAT_FRAMETYPE 0x00000020 /* 0 == IEEE 802.3 */
407 #define DC_RXSTAT_COLLSEEN 0x00000040
408 #define DC_RXSTAT_GIANT 0x00000080
409 #define DC_RXSTAT_LASTFRAG 0x00000100
410 #define DC_RXSTAT_FIRSTFRAG 0x00000200
411 #define DC_RXSTAT_MULTICAST 0x00000400
412 #define DC_RXSTAT_RUNT 0x00000800
413 #define DC_RXSTAT_RXTYPE 0x00003000
414 #define DC_RXSTAT_DE 0x00004000
415 #define DC_RXSTAT_RXERR 0x00008000
416 #define DC_RXSTAT_RXLEN 0x3FFF0000
417 #define DC_RXSTAT_OWN 0x80000000
419 #define DC_RXBYTES(x) ((x & DC_RXSTAT_RXLEN) >> 16)
420 #define DC_RXSTAT (DC_RXSTAT_FIRSTFRAG|DC_RXSTAT_LASTFRAG|DC_RXSTAT_OWN)
422 #define DC_RXCTL_BUFLEN1 0x00000FFF
423 #define DC_RXCTL_BUFLEN2 0x00FFF000
424 #define DC_RXCTL_RLINK 0x01000000
425 #define DC_RXCTL_RLAST 0x02000000
427 #define DC_TXSTAT_DEFER 0x00000001
428 #define DC_TXSTAT_UNDERRUN 0x00000002
429 #define DC_TXSTAT_LINKFAIL 0x00000003
430 #define DC_TXSTAT_COLLCNT 0x00000078
431 #define DC_TXSTAT_SQE 0x00000080
432 #define DC_TXSTAT_EXCESSCOLL 0x00000100
433 #define DC_TXSTAT_LATECOLL 0x00000200
434 #define DC_TXSTAT_NOCARRIER 0x00000400
435 #define DC_TXSTAT_CARRLOST 0x00000800
436 #define DC_TXSTAT_JABTIMEO 0x00004000
437 #define DC_TXSTAT_ERRSUM 0x00008000
438 #define DC_TXSTAT_OWN 0x80000000
440 #define DC_TXCTL_BUFLEN1 0x000007FF
441 #define DC_TXCTL_BUFLEN2 0x003FF800
442 #define DC_TXCTL_FILTTYPE0 0x00400000
443 #define DC_TXCTL_PAD 0x00800000
444 #define DC_TXCTL_TLINK 0x01000000
445 #define DC_TXCTL_TLAST 0x02000000
446 #define DC_TXCTL_NOCRC 0x04000000
447 #define DC_TXCTL_SETUP 0x08000000
448 #define DC_TXCTL_FILTTYPE1 0x10000000
449 #define DC_TXCTL_FIRSTFRAG 0x20000000
450 #define DC_TXCTL_LASTFRAG 0x40000000
451 #define DC_TXCTL_FINT 0x80000000
453 #define DC_FILTER_PERFECT 0x00000000
454 #define DC_FILTER_HASHPERF 0x00400000
455 #define DC_FILTER_INVERSE 0x10000000
456 #define DC_FILTER_HASHONLY 0x10400000
458 #define DC_MAXFRAGS 16
459 #ifdef DEVICE_POLLING
460 #define DC_RX_LIST_CNT 192
462 #define DC_RX_LIST_CNT 64
464 #define DC_TX_LIST_CNT 256
465 #define DC_MIN_FRAMELEN 60
466 #define DC_RXLEN 1536
468 #define DC_INC(x, y) (x) = (x + 1) % y
470 struct dc_list_data {
471 struct dc_desc dc_rx_list[DC_RX_LIST_CNT];
472 struct dc_desc dc_tx_list[DC_TX_LIST_CNT];
475 struct dc_chain_data {
476 struct mbuf *dc_rx_chain[DC_RX_LIST_CNT];
477 struct mbuf *dc_tx_chain[DC_TX_LIST_CNT];
478 u_int32_t dc_sbuf[DC_SFRAME_LEN/sizeof(u_int32_t)];
479 u_int8_t dc_pad[DC_MIN_FRAMELEN];
486 struct dc_mediainfo {
490 u_int8_t *dc_reset_ptr;
491 u_int8_t dc_reset_len;
492 struct dc_mediainfo *dc_next;
502 struct dc_mii_frame {
503 u_int8_t mii_stdelim;
505 u_int8_t mii_phyaddr;
506 u_int8_t mii_regaddr;
507 u_int8_t mii_turnaround;
514 #define DC_MII_STARTDELIM 0x01
515 #define DC_MII_READOP 0x02
516 #define DC_MII_WRITEOP 0x01
517 #define DC_MII_TURNAROUND 0x02
521 * Registers specific to clone devices.
522 * This mainly relates to RX filter programming: not all 21x4x clones
523 * use the standard DEC filter programming mechanism.
527 * ADMtek specific registers and constants for the AL981 and AN985.
528 * The AN985 doesn't use the magic PHY registers.
530 #define DC_AL_CR 0x88 /* command register */
531 #define DC_AL_PAR0 0xA4 /* station address */
532 #define DC_AL_PAR1 0xA8 /* station address */
533 #define DC_AL_MAR0 0xAC /* multicast hash filter */
534 #define DC_AL_MAR1 0xB0 /* multicast hash filter */
535 #define DC_AL_BMCR 0xB4 /* built in PHY control */
536 #define DC_AL_BMSR 0xB8 /* built in PHY status */
537 #define DC_AL_VENID 0xBC /* built in PHY ID0 */
538 #define DC_AL_DEVID 0xC0 /* built in PHY ID1 */
539 #define DC_AL_ANAR 0xC4 /* built in PHY autoneg advert */
540 #define DC_AL_LPAR 0xC8 /* bnilt in PHY link part. ability */
541 #define DC_AL_ANER 0xCC /* built in PHY autoneg expansion */
543 #define DC_AL_CR_ATUR 0x00000001 /* automatic TX underrun recovery */
544 #define DC_ADMTEK_PHYADDR 0x1
545 #define DC_AL_EE_NODEADDR 4
546 /* End of ADMtek specific registers */
549 * ASIX specific registers.
551 #define DC_AX_FILTIDX 0x68 /* RX filter index */
552 #define DC_AX_FILTDATA 0x70 /* RX filter data */
555 * Special ASIX-specific bits in the ASIX NETCFG register (CSR6).
557 #define DC_AX_NETCFG_RX_BROAD 0x00000100
560 * RX Filter Index Register values
562 #define DC_AX_FILTIDX_PAR0 0x00000000
563 #define DC_AX_FILTIDX_PAR1 0x00000001
564 #define DC_AX_FILTIDX_MAR0 0x00000002
565 #define DC_AX_FILTIDX_MAR1 0x00000003
566 /* End of ASIX specific registers */
569 * Macronix specific registers. The Macronix chips have a special
570 * register for reading the NWAY status, which we don't use, plus
571 * a magic packet register, which we need to tweak a bit per the
572 * Macronix application notes.
574 #define DC_MX_MAGICPACKET 0x80
575 #define DC_MX_NWAYSTAT 0xA0
578 * Magic packet register
580 #define DC_MX_MPACK_DISABLE 0x00400000
583 * NWAY status register.
585 #define DC_MX_NWAY_10BTHALF 0x08000000
586 #define DC_MX_NWAY_10BTFULL 0x10000000
587 #define DC_MX_NWAY_100BTHALF 0x20000000
588 #define DC_MX_NWAY_100BTFULL 0x40000000
589 #define DC_MX_NWAY_100BT4 0x80000000
592 * These are magic values that must be written into CSR16
593 * (DC_MX_MAGICPACKET) in order to put the chip into proper
594 * operating mode. The magic numbers are documented in the
595 * Macronix 98715 application notes.
597 #define DC_MX_MAGIC_98713 0x0F370000
598 #define DC_MX_MAGIC_98713A 0x0B3C0000
599 #define DC_MX_MAGIC_98715 0x0B3C0000
600 #define DC_MX_MAGIC_98725 0x0B3C0000
601 /* End of Macronix specific registers */
604 * PNIC 82c168/82c169 specific registers.
605 * The PNIC has its own special NWAY support, which doesn't work,
606 * and shortcut ways of reading the EEPROM and MII bus.
608 #define DC_PN_GPIO 0x60 /* general purpose pins control */
609 #define DC_PN_PWRUP_CFG 0x90 /* config register, set by EEPROM */
610 #define DC_PN_SIOCTL 0x98 /* serial EEPROM control register */
611 #define DC_PN_MII 0xA0 /* MII access register */
612 #define DC_PN_NWAY 0xB8 /* Internal NWAY register */
614 /* Serial I/O EEPROM register */
615 #define DC_PN_SIOCTL_DATA 0x0000003F
616 #define DC_PN_SIOCTL_OPCODE 0x00000300
617 #define DC_PN_SIOCTL_BUSY 0x80000000
619 #define DC_PN_EEOPCODE_ERASE 0x00000300
620 #define DC_PN_EEOPCODE_READ 0x00000600
621 #define DC_PN_EEOPCODE_WRITE 0x00000100
624 * The first two general purpose pins control speed selection and
625 * 100Mbps loopback on the 82c168 chip. The control bits should always
626 * be set (to make the data pins outputs) and the speed selction and
627 * loopback bits set accordingly when changing media. Physically, this
628 * will set the state of a relay mounted on the card.
630 #define DC_PN_GPIO_DATA0 0x000000001
631 #define DC_PN_GPIO_DATA1 0x000000002
632 #define DC_PN_GPIO_DATA2 0x000000004
633 #define DC_PN_GPIO_DATA3 0x000000008
634 #define DC_PN_GPIO_CTL0 0x000000010
635 #define DC_PN_GPIO_CTL1 0x000000020
636 #define DC_PN_GPIO_CTL2 0x000000040
637 #define DC_PN_GPIO_CTL3 0x000000080
638 #define DC_PN_GPIO_SPEEDSEL DC_PN_GPIO_DATA0/* 1 == 100Mbps, 0 == 10Mbps */
639 #define DC_PN_GPIO_100TX_LOOP DC_PN_GPIO_DATA1/* 1 == normal, 0 == loop */
640 #define DC_PN_GPIO_BNC_ENB DC_PN_GPIO_DATA2
641 #define DC_PN_GPIO_100TX_LNK DC_PN_GPIO_DATA3
642 #define DC_PN_GPIO_SETBIT(sc, r) \
643 DC_SETBIT(sc, DC_PN_GPIO, ((r) | (r << 4)))
644 #define DC_PN_GPIO_CLRBIT(sc, r) \
646 DC_SETBIT(sc, DC_PN_GPIO, ((r) << 4)); \
647 DC_CLRBIT(sc, DC_PN_GPIO, (r)); \
650 /* shortcut MII access register */
651 #define DC_PN_MII_DATA 0x0000FFFF
652 #define DC_PN_MII_RESERVER 0x00020000
653 #define DC_PN_MII_REGADDR 0x007C0000
654 #define DC_PN_MII_PHYADDR 0x0F800000
655 #define DC_PN_MII_OPCODE 0x30000000
656 #define DC_PN_MII_BUSY 0x80000000
658 #define DC_PN_MIIOPCODE_READ 0x60020000
659 #define DC_PN_MIIOPCODE_WRITE 0x50020000
661 /* Internal NWAY bits */
662 #define DC_PN_NWAY_RESET 0x00000001 /* reset */
663 #define DC_PN_NWAY_PDOWN 0x00000002 /* power down */
664 #define DC_PN_NWAY_BYPASS 0x00000004 /* bypass */
665 #define DC_PN_NWAY_AUILOWCUR 0x00000008 /* AUI low current */
666 #define DC_PN_NWAY_TPEXTEND 0x00000010 /* low squelch voltage */
667 #define DC_PN_NWAY_POLARITY 0x00000020 /* 0 == on, 1 == off */
668 #define DC_PN_NWAY_TP 0x00000040 /* 1 == tp, 0 == AUI */
669 #define DC_PN_NWAY_AUIVOLT 0x00000080 /* 1 == full, 0 == half */
670 #define DC_PN_NWAY_DUPLEX 0x00000100 /* LED, 1 == full, 0 == half */
671 #define DC_PN_NWAY_LINKTEST 0x00000200 /* 0 == on, 1 == off */
672 #define DC_PN_NWAY_AUTODETECT 0x00000400 /* 1 == off, 0 == on */
673 #define DC_PN_NWAY_SPEEDSEL 0x00000800 /* LED, 0 = 10, 1 == 100 */
674 #define DC_PN_NWAY_NWAY_ENB 0x00001000 /* 0 == off, 1 == on */
675 #define DC_PN_NWAY_CAP10HDX 0x00002000
676 #define DC_PN_NWAY_CAP10FDX 0x00004000
677 #define DC_PN_NWAY_CAP100FDX 0x00008000
678 #define DC_PN_NWAY_CAP100HDX 0x00010000
679 #define DC_PN_NWAY_CAP100T4 0x00020000
680 #define DC_PN_NWAY_ANEGRESTART 0x02000000 /* resets when aneg done */
681 #define DC_PN_NWAY_REMFAULT 0x04000000
682 #define DC_PN_NWAY_LPAR10HDX 0x08000000
683 #define DC_PN_NWAY_LPAR10FDX 0x10000000
684 #define DC_PN_NWAY_LPAR100FDX 0x20000000
685 #define DC_PN_NWAY_LPAR100HDX 0x40000000
686 #define DC_PN_NWAY_LPAR100T4 0x80000000
688 /* End of PNIC specific registers */
691 * CONEXANT specific registers.
694 #define DC_CONEXANT_PHYADDR 0x1
695 #define DC_CONEXANT_EE_NODEADDR 0x19A
697 /* End of CONEXANT specific registers */
701 struct arpcom arpcom; /* interface info */
702 bus_space_handle_t dc_bhandle; /* bus space handle */
703 bus_space_tag_t dc_btag; /* bus space tag */
705 struct resource *dc_irq;
706 struct resource *dc_res;
707 const struct dc_type *dc_info; /* adapter info */
712 u_int8_t dc_cachesize;
714 int dc_pnic_rx_bug_save;
715 unsigned char *dc_pnic_rx_buf;
719 u_int32_t dc_txthresh;
721 struct dc_mediainfo *dc_mi;
722 struct dc_list_data *dc_ldata;
723 struct dc_chain_data dc_cdata;
724 struct callout dc_stat_timer;
725 #ifdef DEVICE_POLLING
726 int rxcycles; /* ... when polling */
728 int suspended; /* 0 = normal 1 = suspended */
730 u_int32_t saved_maps[5]; /* pci data */
731 u_int32_t saved_biosaddr;
732 u_int8_t saved_intline;
733 u_int8_t saved_cachelnsz;
734 u_int8_t saved_lattimer;
737 #define DC_TX_POLL 0x00000001
738 #define DC_TX_COALESCE 0x00000002
739 #define DC_TX_ADMTEK_WAR 0x00000004
740 #define DC_TX_USE_TX_INTR 0x00000008
741 #define DC_RX_FILTER_TULIP 0x00000010
742 #define DC_TX_INTR_FIRSTFRAG 0x00000020
743 #define DC_PNIC_RX_BUG_WAR 0x00000040
744 #define DC_TX_FIXED_RING 0x00000080
745 #define DC_TX_STORENFWD 0x00000100
746 #define DC_REDUCED_MII_POLL 0x00000200
747 #define DC_TX_INTR_ALWAYS 0x00000400
748 #define DC_21143_NWAY 0x00000800
749 #define DC_128BIT_HASH 0x00001000
750 #define DC_64BIT_HASH 0x00002000
751 #define DC_TULIP_LEDS 0x00004000
752 #define DC_TX_ONE 0x00008000
753 #define DC_TX_ALIGN 0x00010000
756 * register space access macros
758 #define CSR_WRITE_4(sc, reg, val) \
759 bus_space_write_4(sc->dc_btag, sc->dc_bhandle, reg, val)
761 #define CSR_READ_4(sc, reg) \
762 bus_space_read_4(sc->dc_btag, sc->dc_bhandle, reg)
764 #define DC_TIMEOUT 1000
765 #define ETHER_ALIGN 2
768 * General constants that are fun to know.
774 #define DC_VENDORID_DEC 0x1011
777 * DEC/Intel 21143 PCI device ID
779 #define DC_DEVICEID_21143 0x0019
782 * Macronix PCI vendor ID
784 #define DC_VENDORID_MX 0x10D9
787 * Macronix PMAC device IDs.
789 #define DC_DEVICEID_98713 0x0512
790 #define DC_DEVICEID_987x5 0x0531
791 #define DC_DEVICEID_98727 0x0532
792 #define DC_DEVICEID_98732 0x0532
794 /* Macronix PCI revision codes. */
795 #define DC_REVISION_98713 0x00
796 #define DC_REVISION_98713A 0x10
797 #define DC_REVISION_98715 0x20
798 #define DC_REVISION_98715AEC_C 0x25
799 #define DC_REVISION_98725 0x30
802 * Compex PCI vendor ID.
804 #define DC_VENDORID_CP 0x11F6
807 * Compex PMAC PCI device IDs.
809 #define DC_DEVICEID_98713_CP 0x9881
812 * Lite-On PNIC PCI vendor ID
814 #define DC_VENDORID_LO 0x11AD
817 * 82c168/82c169 PNIC device IDs. Both chips have the same device
818 * ID but different revisions. Revision 0x10 is the 82c168, and
819 * 0x20 is the 82c169.
821 #define DC_DEVICEID_82C168 0x0002
823 #define DC_REVISION_82C168 0x10
824 #define DC_REVISION_82C169 0x20
827 * Lite-On PNIC II device ID. Note: this is actually a Macronix 98715A
828 * with wake on lan/magic packet support.
830 #define DC_DEVICEID_82C115 0xc115
835 #define DC_VENDORID_DAVICOM 0x1282
838 * Davicom device IDs.
840 #define DC_DEVICEID_DM9009 0x9009
841 #define DC_DEVICEID_DM9100 0x9100
842 #define DC_DEVICEID_DM9102 0x9102
845 * The DM9102A has the same PCI device ID as the DM9102,
846 * but a higher revision code.
848 #define DC_REVISION_DM9102 0x10
849 #define DC_REVISION_DM9102A 0x30
854 #define DC_VENDORID_ADMTEK 0x1317
859 #define DC_DEVICEID_AL981 0x0981
860 #define DC_DEVICEID_AN985 0x0985
861 #define DC_DEVICEID_FA511 0x1985
862 #define DC_DEVICEID_ADM9511 0x9511
863 #define DC_DEVICEID_ADM9513 0x9513
869 #define DC_VENDORID_3COM 0x10b7
872 * 3COM OfficeConnect 10/100B (3CSOHO100B-TX)
874 #define DC_DEVICEID_3CSOHOB 0x9300
879 #define DC_VENDORID_ASIX 0x125B
884 #define DC_DEVICEID_AX88140A 0x1400
887 * The ASIX AX88140 and ASIX AX88141 have the same vendor and
888 * device IDs but different revision values.
890 #define DC_REVISION_88140 0x00
891 #define DC_REVISION_88141 0x10
896 #define DC_VENDORID_ACCTON 0x1113
901 #define DC_DEVICEID_EN1217 0x1217
902 #define DC_DEVICEID_EN2242 0x1216
907 #define DC_VENDORID_XIRCOM 0x115d
912 #define DC_DEVICEID_X3201 0x0003
915 * Conexant vendor ID.
917 #define DC_VENDORID_CONEXANT 0x14f1
920 * Conexant device IDs.
922 #define DC_DEVICEID_RS7112 0x1803
925 * PCI low memory base and low I/O base register, and
926 * other PCI registers.
929 #define DC_PCI_CFID 0x00 /* Id */
930 #define DC_PCI_CFCS 0x04 /* Command and status */
931 #define DC_PCI_CFRV 0x08 /* Revision */
932 #define DC_PCI_CFLT 0x0C /* Latency timer */
933 #define DC_PCI_CFBIO 0x10 /* Base I/O address */
934 #define DC_PCI_CFBMA 0x14 /* Base memory address */
935 #define DC_PCI_CCIS 0x28 /* Card info struct */
936 #define DC_PCI_CSID 0x2C /* Subsystem ID */
937 #define DC_PCI_CBER 0x30 /* Expansion ROM base address */
938 #define DC_PCI_CCAP 0x34 /* Caps pointer - PD/TD chip only */
939 #define DC_PCI_CFIT 0x3C /* Interrupt */
940 #define DC_PCI_CFDD 0x40 /* Device and driver area */
941 #define DC_PCI_CWUA0 0x44 /* Wake-Up LAN addr 0 */
942 #define DC_PCI_CWUA1 0x48 /* Wake-Up LAN addr 1 */
943 #define DC_PCI_SOP0 0x4C /* SecureON passwd 0 */
944 #define DC_PCI_SOP1 0x50 /* SecureON passwd 1 */
945 #define DC_PCI_CWUC 0x54 /* Configuration Wake-Up cmd */
946 #define DC_PCI_CCID 0xDC /* Capability ID - PD/TD only */
947 #define DC_PCI_CPMC 0xE0 /* Pwrmgmt ctl & sts - PD/TD only */
949 /* PCI ID register */
950 #define DC_CFID_VENDOR 0x0000FFFF
951 #define DC_CFID_DEVICE 0xFFFF0000
953 /* PCI command/status register */
954 #define DC_CFCS_IOSPACE 0x00000001 /* I/O space enable */
955 #define DC_CFCS_MEMSPACE 0x00000002 /* memory space enable */
956 #define DC_CFCS_BUSMASTER 0x00000004 /* bus master enable */
957 #define DC_CFCS_MWI_ENB 0x00000010 /* mem write and inval enable */
958 #define DC_CFCS_PARITYERR_ENB 0x00000040 /* parity error enable */
959 #define DC_CFCS_SYSERR_ENB 0x00000100 /* system error enable */
960 #define DC_CFCS_NEWCAPS 0x00100000 /* new capabilities */
961 #define DC_CFCS_FAST_B2B 0x00800000 /* fast back-to-back capable */
962 #define DC_CFCS_DATAPARITY 0x01000000 /* Parity error report */
963 #define DC_CFCS_DEVSELTIM 0x06000000 /* devsel timing */
964 #define DC_CFCS_TGTABRT 0x10000000 /* received target abort */
965 #define DC_CFCS_MASTERABRT 0x20000000 /* received master abort */
966 #define DC_CFCS_SYSERR 0x40000000 /* asserted system error */
967 #define DC_CFCS_PARITYERR 0x80000000 /* asserted parity error */
969 /* PCI revision register */
970 #define DC_CFRV_STEPPING 0x0000000F
971 #define DC_CFRV_REVISION 0x000000F0
972 #define DC_CFRV_SUBCLASS 0x00FF0000
973 #define DC_CFRV_BASECLASS 0xFF000000
975 #define DC_21143_PB_REV 0x00000030
976 #define DC_21143_TB_REV 0x00000030
977 #define DC_21143_PC_REV 0x00000030
978 #define DC_21143_TC_REV 0x00000030
979 #define DC_21143_PD_REV 0x00000041
980 #define DC_21143_TD_REV 0x00000041
982 /* PCI latency timer register */
983 #define DC_CFLT_CACHELINESIZE 0x000000FF
984 #define DC_CFLT_LATENCYTIMER 0x0000FF00
986 /* PCI subsystem ID register */
987 #define DC_CSID_VENDOR 0x0000FFFF
988 #define DC_CSID_DEVICE 0xFFFF0000
990 /* PCI cababilities pointer */
991 #define DC_CCAP_OFFSET 0x000000FF
993 /* PCI interrupt config register */
994 #define DC_CFIT_INTLINE 0x000000FF
995 #define DC_CFIT_INTPIN 0x0000FF00
996 #define DC_CFIT_MIN_GNT 0x00FF0000
997 #define DC_CFIT_MAX_LAT 0xFF000000
999 /* PCI capability register */
1000 #define DC_CCID_CAPID 0x000000FF
1001 #define DC_CCID_NEXTPTR 0x0000FF00
1002 #define DC_CCID_PM_VERS 0x00070000
1003 #define DC_CCID_PME_CLK 0x00080000
1004 #define DC_CCID_DVSPEC_INT 0x00200000
1005 #define DC_CCID_STATE_D1 0x02000000
1006 #define DC_CCID_STATE_D2 0x04000000
1007 #define DC_CCID_PME_D0 0x08000000
1008 #define DC_CCID_PME_D1 0x10000000
1009 #define DC_CCID_PME_D2 0x20000000
1010 #define DC_CCID_PME_D3HOT 0x40000000
1011 #define DC_CCID_PME_D3COLD 0x80000000
1013 /* PCI power management control/status register */
1014 #define DC_CPMC_STATE 0x00000003
1015 #define DC_CPMC_PME_ENB 0x00000100
1016 #define DC_CPMC_PME_STS 0x00008000
1018 /* Device specific region */
1019 /* Configuration and driver area */
1020 #define DC_CFDD_DRVUSE 0x0000FFFF
1021 #define DC_CFDD_SNOOZE_MODE 0x40000000
1022 #define DC_CFDD_SLEEP_MODE 0x80000000
1024 /* Configuration wake-up command register */
1025 #define DC_CWUC_MUST_BE_ZERO 0x00000001
1026 #define DC_CWUC_SECUREON_ENB 0x00000002
1027 #define DC_CWUC_FORCE_WUL 0x00000004
1028 #define DC_CWUC_BNC_ABILITY 0x00000008
1029 #define DC_CWUC_AUI_ABILITY 0x00000010
1030 #define DC_CWUC_TP10_ABILITY 0x00000020
1031 #define DC_CWUC_MII_ABILITY 0x00000040
1032 #define DC_CWUC_SYM_ABILITY 0x00000080
1033 #define DC_CWUC_LOCK 0x00000100
1039 #define DC_IB_CTLRCNT 0x13
1040 #define DC_IB_LEAF0_CNUM 0x1A
1041 #define DC_IB_LEAF0_OFFSET 0x1B
1043 struct dc_info_leaf {
1044 u_int16_t dc_conntype;
1047 u_int16_t dc_infoblk;
1050 #define DC_CTYPE_10BT 0x0000
1051 #define DC_CTYPE_10BT_NWAY 0x0100
1052 #define DC_CTYPE_10BT_FDX 0x0204
1053 #define DC_CTYPE_10B2 0x0001
1054 #define DC_CTYPE_10B5 0x0002
1055 #define DC_CTYPE_100BT 0x0003
1056 #define DC_CTYPE_100BT_FDX 0x0205
1057 #define DC_CTYPE_100T4 0x0006
1058 #define DC_CTYPE_100FX 0x0007
1059 #define DC_CTYPE_100FX_FDX 0x0208
1060 #define DC_CTYPE_MII_10BT 0x0009
1061 #define DC_CTYPE_MII_10BT_FDX 0x020A
1062 #define DC_CTYPE_MII_100BT 0x000D
1063 #define DC_CTYPE_MII_100BT_FDX 0x020E
1064 #define DC_CTYPE_MII_100T4 0x000F
1065 #define DC_CTYPE_MII_100FX 0x0010
1066 #define DC_CTYPE_MII_100FX_FDX 0x0211
1067 #define DC_CTYPE_DYN_PUP_AUTOSENSE 0x0800
1068 #define DC_CTYPE_PUP_AUTOSENSE 0x8800
1069 #define DC_CTYPE_NOMEDIA 0xFFFF
1071 #define DC_EBLOCK_SIA 0x0002
1072 #define DC_EBLOCK_MII 0x0003
1073 #define DC_EBLOCK_SYM 0x0004
1074 #define DC_EBLOCK_RESET 0x0005
1075 #define DC_EBLOCK_PHY_SHUTDOWN 0x0006
1077 struct dc_leaf_hdr {
1083 struct dc_eblock_hdr {
1088 struct dc_eblock_sia {
1089 struct dc_eblock_hdr dc_sia_hdr;
1090 u_int8_t dc_sia_code;
1093 u_int8_t dc_sia_mediaspec[6]; /* CSR13, CSR14, CSR15 */
1094 u_int8_t dc_sia_gpio_ctl[2];
1095 u_int8_t dc_sia_gpio_dat[2];
1097 struct dc_sia_noext {
1098 u_int8_t dc_sia_gpio_ctl[2];
1099 u_int8_t dc_sia_gpio_dat[2];
1104 #define DC_SIA_CODE_10BT 0x00
1105 #define DC_SIA_CODE_10B2 0x01
1106 #define DC_SIA_CODE_10B5 0x02
1107 #define DC_SIA_CODE_10BT_FDX 0x04
1108 #define DC_SIA_CODE_EXT 0x40
1111 * Note that the first word in the gpr and reset
1112 * sequences is always a control word.
1114 struct dc_eblock_mii {
1115 struct dc_eblock_hdr dc_mii_hdr;
1116 u_int8_t dc_mii_phynum;
1117 u_int8_t dc_gpr_len;
1118 /* u_int16_t dc_gpr_dat[n]; */
1119 /* u_int8_t dc_reset_len; */
1120 /* u_int16_t dc_reset_dat[n]; */
1121 /* There are other fields after these, but we don't
1122 * care about them since they can be determined by looking
1127 struct dc_eblock_sym {
1128 struct dc_eblock_hdr dc_sym_hdr;
1129 u_int8_t dc_sym_code;
1130 u_int8_t dc_sym_gpio_ctl[2];
1131 u_int8_t dc_sym_gpio_dat[2];
1132 u_int8_t dc_sym_cmd[2];
1135 #define DC_SYM_CODE_100BT 0x03
1136 #define DC_SYM_CODE_100BT_FDX 0x05
1137 #define DC_SYM_CODE_100T4 0x06
1138 #define DC_SYM_CODE_100FX 0x07
1139 #define DC_SYM_CODE_100FX_FDX 0x08
1141 struct dc_eblock_reset {
1142 struct dc_eblock_hdr dc_reset_hdr;
1143 u_int8_t dc_reset_len;
1144 /* u_int16_t dc_reset_dat[n]; */