HAMMER 46B/Many: Stabilization pass
[dragonfly.git] / sys / kern / vfs_mount.c
1 /*
2  * Copyright (c) 2004 The DragonFly Project.  All rights reserved.
3  * 
4  * This code is derived from software contributed to The DragonFly Project
5  * by Matthew Dillon <dillon@backplane.com>
6  * 
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in
15  *    the documentation and/or other materials provided with the
16  *    distribution.
17  * 3. Neither the name of The DragonFly Project nor the names of its
18  *    contributors may be used to endorse or promote products derived
19  *    from this software without specific, prior written permission.
20  * 
21  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
25  * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
27  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
29  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
31  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  * Copyright (c) 1989, 1993
35  *      The Regents of the University of California.  All rights reserved.
36  * (c) UNIX System Laboratories, Inc.
37  * All or some portions of this file are derived from material licensed
38  * to the University of California by American Telephone and Telegraph
39  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
40  * the permission of UNIX System Laboratories, Inc.
41  *
42  * Redistribution and use in source and binary forms, with or without
43  * modification, are permitted provided that the following conditions
44  * are met:
45  * 1. Redistributions of source code must retain the above copyright
46  *    notice, this list of conditions and the following disclaimer.
47  * 2. Redistributions in binary form must reproduce the above copyright
48  *    notice, this list of conditions and the following disclaimer in the
49  *    documentation and/or other materials provided with the distribution.
50  * 3. All advertising materials mentioning features or use of this software
51  *    must display the following acknowledgement:
52  *      This product includes software developed by the University of
53  *      California, Berkeley and its contributors.
54  * 4. Neither the name of the University nor the names of its contributors
55  *    may be used to endorse or promote products derived from this software
56  *    without specific prior written permission.
57  *
58  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
59  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
60  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
61  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
62  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
63  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
64  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
65  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
66  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
67  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
68  * SUCH DAMAGE.
69  *
70  * $DragonFly: src/sys/kern/vfs_mount.c,v 1.34 2008/05/18 21:47:02 dillon Exp $
71  */
72
73 /*
74  * External virtual filesystem routines
75  */
76 #include "opt_ddb.h"
77
78 #include <sys/param.h>
79 #include <sys/systm.h>
80 #include <sys/kernel.h>
81 #include <sys/malloc.h>
82 #include <sys/mount.h>
83 #include <sys/proc.h>
84 #include <sys/vnode.h>
85 #include <sys/buf.h>
86 #include <sys/eventhandler.h>
87 #include <sys/kthread.h>
88 #include <sys/sysctl.h>
89
90 #include <machine/limits.h>
91
92 #include <sys/buf2.h>
93 #include <sys/thread2.h>
94 #include <sys/sysref2.h>
95
96 #include <vm/vm.h>
97 #include <vm/vm_object.h>
98
99 struct mountscan_info {
100         TAILQ_ENTRY(mountscan_info) msi_entry;
101         int msi_how;
102         struct mount *msi_node;
103 };
104
105 struct vmntvnodescan_info {
106         TAILQ_ENTRY(vmntvnodescan_info) entry;
107         struct vnode *vp;
108 };
109
110 static int vnlru_nowhere = 0;
111 SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RD,
112             &vnlru_nowhere, 0,
113             "Number of times the vnlru process ran without success");
114
115
116 static struct lwkt_token mntid_token;
117
118 /* note: mountlist exported to pstat */
119 struct mntlist mountlist = TAILQ_HEAD_INITIALIZER(mountlist);
120 static TAILQ_HEAD(,mountscan_info) mountscan_list;
121 static struct lwkt_token mountlist_token;
122 static TAILQ_HEAD(,vmntvnodescan_info) mntvnodescan_list;
123 struct lwkt_token mntvnode_token;
124
125 static TAILQ_HEAD(,bio_ops) bio_ops_list = TAILQ_HEAD_INITIALIZER(bio_ops_list);
126
127 /*
128  * Called from vfsinit()
129  */
130 void
131 vfs_mount_init(void)
132 {
133         lwkt_token_init(&mountlist_token);
134         lwkt_token_init(&mntvnode_token);
135         lwkt_token_init(&mntid_token);
136         TAILQ_INIT(&mountscan_list);
137         TAILQ_INIT(&mntvnodescan_list);
138 }
139
140 /*
141  * Support function called with mntvnode_token held to remove a vnode
142  * from the mountlist.  We must update any list scans which are in progress.
143  */
144 static void
145 vremovevnodemnt(struct vnode *vp)
146 {
147         struct vmntvnodescan_info *info;
148
149         TAILQ_FOREACH(info, &mntvnodescan_list, entry) {
150                 if (info->vp == vp)
151                         info->vp = TAILQ_NEXT(vp, v_nmntvnodes);
152         }
153         TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes);
154 }
155
156 /*
157  * Allocate a new vnode and associate it with a tag, mount point, and
158  * operations vector.
159  *
160  * A VX locked and refd vnode is returned.  The caller should setup the
161  * remaining fields and vx_put() or, if he wishes to leave a vref,
162  * vx_unlock() the vnode.
163  */
164 int
165 getnewvnode(enum vtagtype tag, struct mount *mp,
166                 struct vnode **vpp, int lktimeout, int lkflags)
167 {
168         struct vnode *vp;
169
170         KKASSERT(mp != NULL);
171
172         vp = allocvnode(lktimeout, lkflags);
173         vp->v_tag = tag;
174         vp->v_data = NULL;
175
176         /*
177          * By default the vnode is assigned the mount point's normal
178          * operations vector.
179          */
180         vp->v_ops = &mp->mnt_vn_use_ops;
181
182         /*
183          * Placing the vnode on the mount point's queue makes it visible.
184          * VNON prevents it from being messed with, however.
185          */
186         insmntque(vp, mp);
187
188         /*
189          * A VX locked & refd vnode is returned.
190          */
191         *vpp = vp;
192         return (0);
193 }
194
195 /*
196  * This function creates vnodes with special operations vectors.  The
197  * mount point is optional.
198  *
199  * This routine is being phased out.
200  */
201 int
202 getspecialvnode(enum vtagtype tag, struct mount *mp,
203                 struct vop_ops **ops,
204                 struct vnode **vpp, int lktimeout, int lkflags)
205 {
206         struct vnode *vp;
207
208         vp = allocvnode(lktimeout, lkflags);
209         vp->v_tag = tag;
210         vp->v_data = NULL;
211         vp->v_ops = ops;
212
213         /*
214          * Placing the vnode on the mount point's queue makes it visible.
215          * VNON prevents it from being messed with, however.
216          */
217         insmntque(vp, mp);
218
219         /*
220          * A VX locked & refd vnode is returned.
221          */
222         *vpp = vp;
223         return (0);
224 }
225
226 /*
227  * Interlock against an unmount, return 0 on success, non-zero on failure.
228  *
229  * The passed flag may be 0 or LK_NOWAIT and is only used if an unmount
230  * is in-progress.  
231  *
232  * If no unmount is in-progress LK_NOWAIT is ignored.  No other flag bits
233  * are used.  A shared locked will be obtained and the filesystem will not
234  * be unmountable until the lock is released.
235  */
236 int
237 vfs_busy(struct mount *mp, int flags)
238 {
239         int lkflags;
240
241         if (mp->mnt_kern_flag & MNTK_UNMOUNT) {
242                 if (flags & LK_NOWAIT)
243                         return (ENOENT);
244                 /* XXX not MP safe */
245                 mp->mnt_kern_flag |= MNTK_MWAIT;
246                 /*
247                  * Since all busy locks are shared except the exclusive
248                  * lock granted when unmounting, the only place that a
249                  * wakeup needs to be done is at the release of the
250                  * exclusive lock at the end of dounmount.
251                  */
252                 tsleep((caddr_t)mp, 0, "vfs_busy", 0);
253                 return (ENOENT);
254         }
255         lkflags = LK_SHARED;
256         if (lockmgr(&mp->mnt_lock, lkflags))
257                 panic("vfs_busy: unexpected lock failure");
258         return (0);
259 }
260
261 /*
262  * Free a busy filesystem.
263  */
264 void
265 vfs_unbusy(struct mount *mp)
266 {
267         lockmgr(&mp->mnt_lock, LK_RELEASE);
268 }
269
270 /*
271  * Lookup a filesystem type, and if found allocate and initialize
272  * a mount structure for it.
273  *
274  * Devname is usually updated by mount(8) after booting.
275  */
276 int
277 vfs_rootmountalloc(char *fstypename, char *devname, struct mount **mpp)
278 {
279         struct vfsconf *vfsp;
280         struct mount *mp;
281
282         if (fstypename == NULL)
283                 return (ENODEV);
284         for (vfsp = vfsconf; vfsp; vfsp = vfsp->vfc_next) {
285                 if (!strcmp(vfsp->vfc_name, fstypename))
286                         break;
287         }
288         if (vfsp == NULL)
289                 return (ENODEV);
290         mp = kmalloc(sizeof(struct mount), M_MOUNT, M_WAITOK | M_ZERO);
291         lockinit(&mp->mnt_lock, "vfslock", VLKTIMEOUT, 0);
292         vfs_busy(mp, LK_NOWAIT);
293         TAILQ_INIT(&mp->mnt_nvnodelist);
294         TAILQ_INIT(&mp->mnt_reservedvnlist);
295         TAILQ_INIT(&mp->mnt_jlist);
296         mp->mnt_nvnodelistsize = 0;
297         mp->mnt_vfc = vfsp;
298         mp->mnt_op = vfsp->vfc_vfsops;
299         mp->mnt_flag = MNT_RDONLY;
300         vfsp->vfc_refcount++;
301         mp->mnt_iosize_max = DFLTPHYS;
302         mp->mnt_stat.f_type = vfsp->vfc_typenum;
303         mp->mnt_flag |= vfsp->vfc_flags & MNT_VISFLAGMASK;
304         strncpy(mp->mnt_stat.f_fstypename, vfsp->vfc_name, MFSNAMELEN);
305         copystr(devname, mp->mnt_stat.f_mntfromname, MNAMELEN - 1, 0);
306         *mpp = mp;
307         return (0);
308 }
309
310 /*
311  * Lookup a mount point by filesystem identifier.
312  */
313 struct mount *
314 vfs_getvfs(fsid_t *fsid)
315 {
316         struct mount *mp;
317         lwkt_tokref ilock;
318
319         lwkt_gettoken(&ilock, &mountlist_token);
320         TAILQ_FOREACH(mp, &mountlist, mnt_list) {
321                 if (mp->mnt_stat.f_fsid.val[0] == fsid->val[0] &&
322                     mp->mnt_stat.f_fsid.val[1] == fsid->val[1]) {
323                         break;
324             }
325         }
326         lwkt_reltoken(&ilock);
327         return (mp);
328 }
329
330 /*
331  * Get a new unique fsid.  Try to make its val[0] unique, since this value
332  * will be used to create fake device numbers for stat().  Also try (but
333  * not so hard) make its val[0] unique mod 2^16, since some emulators only
334  * support 16-bit device numbers.  We end up with unique val[0]'s for the
335  * first 2^16 calls and unique val[0]'s mod 2^16 for the first 2^8 calls.
336  *
337  * Keep in mind that several mounts may be running in parallel.  Starting
338  * the search one past where the previous search terminated is both a
339  * micro-optimization and a defense against returning the same fsid to
340  * different mounts.
341  */
342 void
343 vfs_getnewfsid(struct mount *mp)
344 {
345         static u_int16_t mntid_base;
346         lwkt_tokref ilock;
347         fsid_t tfsid;
348         int mtype;
349
350         lwkt_gettoken(&ilock, &mntid_token);
351         mtype = mp->mnt_vfc->vfc_typenum;
352         tfsid.val[1] = mtype;
353         mtype = (mtype & 0xFF) << 24;
354         for (;;) {
355                 tfsid.val[0] = makeudev(255,
356                     mtype | ((mntid_base & 0xFF00) << 8) | (mntid_base & 0xFF));
357                 mntid_base++;
358                 if (vfs_getvfs(&tfsid) == NULL)
359                         break;
360         }
361         mp->mnt_stat.f_fsid.val[0] = tfsid.val[0];
362         mp->mnt_stat.f_fsid.val[1] = tfsid.val[1];
363         lwkt_reltoken(&ilock);
364 }
365
366 /*
367  * This routine is called when we have too many vnodes.  It attempts
368  * to free <count> vnodes and will potentially free vnodes that still
369  * have VM backing store (VM backing store is typically the cause
370  * of a vnode blowout so we want to do this).  Therefore, this operation
371  * is not considered cheap.
372  *
373  * A number of conditions may prevent a vnode from being reclaimed.
374  * the buffer cache may have references on the vnode, a directory
375  * vnode may still have references due to the namei cache representing
376  * underlying files, or the vnode may be in active use.   It is not
377  * desireable to reuse such vnodes.  These conditions may cause the
378  * number of vnodes to reach some minimum value regardless of what
379  * you set kern.maxvnodes to.  Do not set kern.maxvnodes too low.
380  */
381
382 /*
383  * This is a quick non-blocking check to determine if the vnode is a good
384  * candidate for being (eventually) vgone()'d.  Returns 0 if the vnode is
385  * not a good candidate, 1 if it is.
386  */
387 static __inline int 
388 vmightfree(struct vnode *vp, int page_count)
389 {
390         if (vp->v_flag & VRECLAIMED)
391                 return (0);
392 #if 0
393         if ((vp->v_flag & VFREE) && TAILQ_EMPTY(&vp->v_namecache))
394                 return (0);
395 #endif
396         if (sysref_isactive(&vp->v_sysref))
397                 return (0);
398         if (vp->v_object && vp->v_object->resident_page_count >= page_count)
399                 return (0);
400         return (1);
401 }
402
403 /*
404  * The vnode was found to be possibly vgone()able and the caller has locked it
405  * (thus the usecount should be 1 now).  Determine if the vnode is actually
406  * vgone()able, doing some cleanups in the process.  Returns 1 if the vnode
407  * can be vgone()'d, 0 otherwise.
408  *
409  * Note that v_auxrefs may be non-zero because (A) this vnode is not a leaf
410  * in the namecache topology and (B) this vnode has buffer cache bufs.
411  * We cannot remove vnodes with non-leaf namecache associations.  We do a
412  * tentitive leaf check prior to attempting to flush out any buffers but the
413  * 'real' test when all is said in done is that v_auxrefs must become 0 for
414  * the vnode to be freeable.
415  *
416  * We could theoretically just unconditionally flush when v_auxrefs != 0,
417  * but flushing data associated with non-leaf nodes (which are always
418  * directories), just throws it away for no benefit.  It is the buffer 
419  * cache's responsibility to choose buffers to recycle from the cached
420  * data point of view.
421  */
422 static int
423 visleaf(struct vnode *vp)
424 {
425         struct namecache *ncp;
426
427         TAILQ_FOREACH(ncp, &vp->v_namecache, nc_vnode) {
428                 if (!TAILQ_EMPTY(&ncp->nc_list))
429                         return(0);
430         }
431         return(1);
432 }
433
434 /*
435  * Try to clean up the vnode to the point where it can be vgone()'d, returning
436  * 0 if it cannot be vgone()'d (or already has been), 1 if it can.  Unlike
437  * vmightfree() this routine may flush the vnode and block.  Vnodes marked
438  * VFREE are still candidates for vgone()ing because they may hold namecache
439  * resources and could be blocking the namecache directory hierarchy (and
440  * related vnodes) from being freed.
441  */
442 static int
443 vtrytomakegoneable(struct vnode *vp, int page_count)
444 {
445         if (vp->v_flag & VRECLAIMED)
446                 return (0);
447         if (vp->v_sysref.refcnt > 1)
448                 return (0);
449         if (vp->v_object && vp->v_object->resident_page_count >= page_count)
450                 return (0);
451         if (vp->v_auxrefs && visleaf(vp)) {
452                 vinvalbuf(vp, V_SAVE, 0, 0);
453 #if 0   /* DEBUG */
454                 kprintf((vp->v_auxrefs ? "vrecycle: vp %p failed: %s\n" :
455                         "vrecycle: vp %p succeeded: %s\n"), vp,
456                         (TAILQ_FIRST(&vp->v_namecache) ? 
457                             TAILQ_FIRST(&vp->v_namecache)->nc_name : "?"));
458 #endif
459         }
460
461         /*
462          * This sequence may seem a little strange, but we need to optimize
463          * the critical path a bit.  We can't recycle vnodes with other
464          * references and because we are trying to recycle an otherwise
465          * perfectly fine vnode we have to invalidate the namecache in a
466          * way that avoids possible deadlocks (since the vnode lock is being
467          * held here).  Finally, we have to check for other references one
468          * last time in case something snuck in during the inval.
469          */
470         if (vp->v_sysref.refcnt > 1 || vp->v_auxrefs != 0)
471                 return (0);
472         if (cache_inval_vp_nonblock(vp))
473                 return (0);
474         return (vp->v_sysref.refcnt <= 1 && vp->v_auxrefs == 0);
475 }
476
477 /*
478  * Reclaim up to 1/10 of the vnodes associated with a mount point.  Try
479  * to avoid vnodes which have lots of resident pages (we are trying to free
480  * vnodes, not memory).  
481  *
482  * This routine is a callback from the mountlist scan.  The mount point
483  * in question will be busied.
484  */
485 static int
486 vlrureclaim(struct mount *mp, void *data)
487 {
488         struct vnode *vp;
489         lwkt_tokref ilock;
490         int done;
491         int trigger;
492         int usevnodes;
493         int count;
494         int trigger_mult = vnlru_nowhere;
495
496         /*
497          * Calculate the trigger point for the resident pages check.  The
498          * minimum trigger value is approximately the number of pages in
499          * the system divded by the number of vnodes.  However, due to
500          * various other system memory overheads unrelated to data caching
501          * it is a good idea to double the trigger (at least).  
502          *
503          * trigger_mult starts at 0.  If the recycler is having problems
504          * finding enough freeable vnodes it will increase trigger_mult.
505          * This should not happen in normal operation, even on machines with
506          * low amounts of memory, but extraordinary memory use by the system
507          * verses the amount of cached data can trigger it.
508          */
509         usevnodes = desiredvnodes;
510         if (usevnodes <= 0)
511                 usevnodes = 1;
512         trigger = vmstats.v_page_count * (trigger_mult + 2) / usevnodes;
513
514         done = 0;
515         lwkt_gettoken(&ilock, &mntvnode_token);
516         count = mp->mnt_nvnodelistsize / 10 + 1;
517         while (count && mp->mnt_syncer) {
518                 /*
519                  * Next vnode.  Use the special syncer vnode to placemark
520                  * the LRU.  This way the LRU code does not interfere with
521                  * vmntvnodescan().
522                  */
523                 vp = TAILQ_NEXT(mp->mnt_syncer, v_nmntvnodes);
524                 TAILQ_REMOVE(&mp->mnt_nvnodelist, mp->mnt_syncer, v_nmntvnodes);
525                 if (vp) {
526                         TAILQ_INSERT_AFTER(&mp->mnt_nvnodelist, vp,
527                                            mp->mnt_syncer, v_nmntvnodes);
528                 } else {
529                         TAILQ_INSERT_HEAD(&mp->mnt_nvnodelist, mp->mnt_syncer,
530                                           v_nmntvnodes);
531                         vp = TAILQ_NEXT(mp->mnt_syncer, v_nmntvnodes);
532                         if (vp == NULL)
533                                 break;
534                 }
535
536                 /*
537                  * __VNODESCAN__
538                  *
539                  * The VP will stick around while we hold mntvnode_token,
540                  * at least until we block, so we can safely do an initial
541                  * check, and then must check again after we lock the vnode.
542                  */
543                 if (vp->v_type == VNON ||       /* syncer or indeterminant */
544                     !vmightfree(vp, trigger)    /* critical path opt */
545                 ) {
546                         --count;
547                         continue;
548                 }
549
550                 /*
551                  * VX get the candidate vnode.  If the VX get fails the 
552                  * vnode might still be on the mountlist.  Our loop depends
553                  * on us at least cycling the vnode to the end of the
554                  * mountlist.
555                  */
556                 if (vx_get_nonblock(vp) != 0) {
557                         --count;
558                         continue;
559                 }
560
561                 /*
562                  * Since we blocked locking the vp, make sure it is still
563                  * a candidate for reclamation.  That is, it has not already
564                  * been reclaimed and only has our VX reference associated
565                  * with it.
566                  */
567                 if (vp->v_type == VNON ||       /* syncer or indeterminant */
568                     (vp->v_flag & VRECLAIMED) ||
569                     vp->v_mount != mp ||
570                     !vtrytomakegoneable(vp, trigger)    /* critical path opt */
571                 ) {
572                         --count;
573                         vx_put(vp);
574                         continue;
575                 }
576
577                 /*
578                  * All right, we are good, move the vp to the end of the
579                  * mountlist and clean it out.  The vget will have returned
580                  * an error if the vnode was destroyed (VRECLAIMED set), so we
581                  * do not have to check again.  The vput() will move the 
582                  * vnode to the free list if the vgone() was successful.
583                  */
584                 KKASSERT(vp->v_mount == mp);
585                 vgone_vxlocked(vp);
586                 vx_put(vp);
587                 ++done;
588                 --count;
589         }
590         lwkt_reltoken(&ilock);
591         return (done);
592 }
593
594 /*
595  * Attempt to recycle vnodes in a context that is always safe to block.
596  * Calling vlrurecycle() from the bowels of file system code has some
597  * interesting deadlock problems.
598  */
599 static struct thread *vnlruthread;
600 static int vnlruproc_sig;
601
602 void
603 vnlru_proc_wait(void)
604 {
605         if (vnlruproc_sig == 0) {
606                 vnlruproc_sig = 1;      /* avoid unnecessary wakeups */
607                 wakeup(vnlruthread);
608         }
609         tsleep(&vnlruproc_sig, 0, "vlruwk", hz);
610 }
611
612 static void 
613 vnlru_proc(void)
614 {
615         struct thread *td = curthread;
616         int done;
617
618         EVENTHANDLER_REGISTER(shutdown_pre_sync, shutdown_kproc, td,
619             SHUTDOWN_PRI_FIRST);   
620
621         crit_enter();
622         for (;;) {
623                 kproc_suspend_loop();
624
625                 /*
626                  * Try to free some vnodes if we have too many
627                  */
628                 if (numvnodes > desiredvnodes &&
629                     freevnodes > desiredvnodes * 2 / 10) {
630                         int count = numvnodes - desiredvnodes;
631
632                         if (count > freevnodes / 100)
633                                 count = freevnodes / 100;
634                         if (count < 5)
635                                 count = 5;
636                         freesomevnodes(count);
637                 }
638
639                 /*
640                  * Nothing to do if most of our vnodes are already on
641                  * the free list.
642                  */
643                 if (numvnodes - freevnodes <= desiredvnodes * 9 / 10) {
644                         vnlruproc_sig = 0;
645                         wakeup(&vnlruproc_sig);
646                         tsleep(td, 0, "vlruwt", hz);
647                         continue;
648                 }
649                 cache_cleanneg(0);
650                 done = mountlist_scan(vlrureclaim, NULL, MNTSCAN_FORWARD);
651
652                 /*
653                  * The vlrureclaim() call only processes 1/10 of the vnodes
654                  * on each mount.  If we couldn't find any repeat the loop
655                  * at least enough times to cover all available vnodes before
656                  * we start sleeping.  Complain if the failure extends past
657                  * 30 second, every 30 seconds.
658                  */
659                 if (done == 0) {
660                         ++vnlru_nowhere;
661                         if (vnlru_nowhere % 10 == 0)
662                                 tsleep(td, 0, "vlrup", hz * 3);
663                         if (vnlru_nowhere % 100 == 0)
664                                 kprintf("vnlru_proc: vnode recycler stopped working!\n");
665                         if (vnlru_nowhere == 1000)
666                                 vnlru_nowhere = 900;
667                 } else {
668                         vnlru_nowhere = 0;
669                 }
670         }
671         crit_exit();
672 }
673
674 /*
675  * MOUNTLIST FUNCTIONS
676  */
677
678 /*
679  * mountlist_insert (MP SAFE)
680  *
681  * Add a new mount point to the mount list.
682  */
683 void
684 mountlist_insert(struct mount *mp, int how)
685 {
686         lwkt_tokref ilock;
687
688         lwkt_gettoken(&ilock, &mountlist_token);
689         if (how == MNTINS_FIRST)
690             TAILQ_INSERT_HEAD(&mountlist, mp, mnt_list);
691         else
692             TAILQ_INSERT_TAIL(&mountlist, mp, mnt_list);
693         lwkt_reltoken(&ilock);
694 }
695
696 /*
697  * mountlist_interlock (MP SAFE)
698  *
699  * Execute the specified interlock function with the mountlist token
700  * held.  The function will be called in a serialized fashion verses
701  * other functions called through this mechanism.
702  */
703 int
704 mountlist_interlock(int (*callback)(struct mount *), struct mount *mp)
705 {
706         lwkt_tokref ilock;
707         int error;
708
709         lwkt_gettoken(&ilock, &mountlist_token);
710         error = callback(mp);
711         lwkt_reltoken(&ilock);
712         return (error);
713 }
714
715 /*
716  * mountlist_boot_getfirst (DURING BOOT ONLY)
717  *
718  * This function returns the first mount on the mountlist, which is
719  * expected to be the root mount.  Since no interlocks are obtained
720  * this function is only safe to use during booting.
721  */
722
723 struct mount *
724 mountlist_boot_getfirst(void)
725 {
726         return(TAILQ_FIRST(&mountlist));
727 }
728
729 /*
730  * mountlist_remove (MP SAFE)
731  *
732  * Remove a node from the mountlist.  If this node is the next scan node
733  * for any active mountlist scans, the active mountlist scan will be 
734  * adjusted to skip the node, thus allowing removals during mountlist
735  * scans.
736  */
737 void
738 mountlist_remove(struct mount *mp)
739 {
740         struct mountscan_info *msi;
741         lwkt_tokref ilock;
742
743         lwkt_gettoken(&ilock, &mountlist_token);
744         TAILQ_FOREACH(msi, &mountscan_list, msi_entry) {
745                 if (msi->msi_node == mp) {
746                         if (msi->msi_how & MNTSCAN_FORWARD)
747                                 msi->msi_node = TAILQ_NEXT(mp, mnt_list);
748                         else
749                                 msi->msi_node = TAILQ_PREV(mp, mntlist, mnt_list);
750                 }
751         }
752         TAILQ_REMOVE(&mountlist, mp, mnt_list);
753         lwkt_reltoken(&ilock);
754 }
755
756 /*
757  * mountlist_scan (MP SAFE)
758  *
759  * Safely scan the mount points on the mount list.  Unless otherwise 
760  * specified each mount point will be busied prior to the callback and
761  * unbusied afterwords.  The callback may safely remove any mount point
762  * without interfering with the scan.  If the current callback
763  * mount is removed the scanner will not attempt to unbusy it.
764  *
765  * If a mount node cannot be busied it is silently skipped.
766  *
767  * The callback return value is aggregated and a total is returned.  A return
768  * value of < 0 is not aggregated and will terminate the scan.
769  *
770  * MNTSCAN_FORWARD      - the mountlist is scanned in the forward direction
771  * MNTSCAN_REVERSE      - the mountlist is scanned in reverse
772  * MNTSCAN_NOBUSY       - the scanner will make the callback without busying
773  *                        the mount node.
774  */
775 int
776 mountlist_scan(int (*callback)(struct mount *, void *), void *data, int how)
777 {
778         struct mountscan_info info;
779         lwkt_tokref ilock;
780         struct mount *mp;
781         thread_t td;
782         int count;
783         int res;
784
785         lwkt_gettoken(&ilock, &mountlist_token);
786
787         info.msi_how = how;
788         info.msi_node = NULL;   /* paranoia */
789         TAILQ_INSERT_TAIL(&mountscan_list, &info, msi_entry);
790
791         res = 0;
792         td = curthread;
793
794         if (how & MNTSCAN_FORWARD) {
795                 info.msi_node = TAILQ_FIRST(&mountlist);
796                 while ((mp = info.msi_node) != NULL) {
797                         if (how & MNTSCAN_NOBUSY) {
798                                 count = callback(mp, data);
799                         } else if (vfs_busy(mp, LK_NOWAIT) == 0) {
800                                 count = callback(mp, data);
801                                 if (mp == info.msi_node)
802                                         vfs_unbusy(mp);
803                         } else {
804                                 count = 0;
805                         }
806                         if (count < 0)
807                                 break;
808                         res += count;
809                         if (mp == info.msi_node)
810                                 info.msi_node = TAILQ_NEXT(mp, mnt_list);
811                 }
812         } else if (how & MNTSCAN_REVERSE) {
813                 info.msi_node = TAILQ_LAST(&mountlist, mntlist);
814                 while ((mp = info.msi_node) != NULL) {
815                         if (how & MNTSCAN_NOBUSY) {
816                                 count = callback(mp, data);
817                         } else if (vfs_busy(mp, LK_NOWAIT) == 0) {
818                                 count = callback(mp, data);
819                                 if (mp == info.msi_node)
820                                         vfs_unbusy(mp);
821                         } else {
822                                 count = 0;
823                         }
824                         if (count < 0)
825                                 break;
826                         res += count;
827                         if (mp == info.msi_node)
828                                 info.msi_node = TAILQ_PREV(mp, mntlist, mnt_list);
829                 }
830         }
831         TAILQ_REMOVE(&mountscan_list, &info, msi_entry);
832         lwkt_reltoken(&ilock);
833         return(res);
834 }
835
836 /*
837  * MOUNT RELATED VNODE FUNCTIONS
838  */
839
840 static struct kproc_desc vnlru_kp = {
841         "vnlru",
842         vnlru_proc,
843         &vnlruthread
844 };
845 SYSINIT(vnlru, SI_SUB_KTHREAD_UPDATE, SI_ORDER_FIRST, kproc_start, &vnlru_kp)
846
847 /*
848  * Move a vnode from one mount queue to another.
849  */
850 void
851 insmntque(struct vnode *vp, struct mount *mp)
852 {
853         lwkt_tokref ilock;
854
855         lwkt_gettoken(&ilock, &mntvnode_token);
856         /*
857          * Delete from old mount point vnode list, if on one.
858          */
859         if (vp->v_mount != NULL) {
860                 KASSERT(vp->v_mount->mnt_nvnodelistsize > 0,
861                         ("bad mount point vnode list size"));
862                 vremovevnodemnt(vp);
863                 vp->v_mount->mnt_nvnodelistsize--;
864         }
865         /*
866          * Insert into list of vnodes for the new mount point, if available.
867          * The 'end' of the LRU list is the vnode prior to mp->mnt_syncer.
868          */
869         if ((vp->v_mount = mp) == NULL) {
870                 lwkt_reltoken(&ilock);
871                 return;
872         }
873         if (mp->mnt_syncer) {
874                 TAILQ_INSERT_BEFORE(mp->mnt_syncer, vp, v_nmntvnodes);
875         } else {
876                 TAILQ_INSERT_TAIL(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
877         }
878         mp->mnt_nvnodelistsize++;
879         lwkt_reltoken(&ilock);
880 }
881
882
883 /*
884  * Scan the vnodes under a mount point and issue appropriate callbacks.
885  *
886  * The fastfunc() callback is called with just the mountlist token held
887  * (no vnode lock).  It may not block and the vnode may be undergoing
888  * modifications while the caller is processing it.  The vnode will
889  * not be entirely destroyed, however, due to the fact that the mountlist
890  * token is held.  A return value < 0 skips to the next vnode without calling
891  * the slowfunc(), a return value > 0 terminates the loop.
892  *
893  * The slowfunc() callback is called after the vnode has been successfully
894  * locked based on passed flags.  The vnode is skipped if it gets rearranged
895  * or destroyed while blocking on the lock.  A non-zero return value from
896  * the slow function terminates the loop.  The slow function is allowed to
897  * arbitrarily block.  The scanning code guarentees consistency of operation
898  * even if the slow function deletes or moves the node, or blocks and some
899  * other thread deletes or moves the node.
900  */
901 int
902 vmntvnodescan(
903     struct mount *mp, 
904     int flags,
905     int (*fastfunc)(struct mount *mp, struct vnode *vp, void *data),
906     int (*slowfunc)(struct mount *mp, struct vnode *vp, void *data),
907     void *data
908 ) {
909         struct vmntvnodescan_info info;
910         lwkt_tokref ilock;
911         struct vnode *vp;
912         int r = 0;
913         int maxcount = 1000000;
914         int stopcount = 0;
915         int count = 0;
916
917         lwkt_gettoken(&ilock, &mntvnode_token);
918
919         /*
920          * If asked to do one pass stop after iterating available vnodes.
921          * Under heavy loads new vnodes can be added while we are scanning,
922          * so this isn't perfect.  Create a slop factor of 2x.
923          */
924         if (flags & VMSC_ONEPASS)
925                 stopcount = mp->mnt_nvnodelistsize * 2;
926
927         info.vp = TAILQ_FIRST(&mp->mnt_nvnodelist);
928         TAILQ_INSERT_TAIL(&mntvnodescan_list, &info, entry);
929         while ((vp = info.vp) != NULL) {
930                 if (--maxcount == 0)
931                         panic("maxcount reached during vmntvnodescan");
932
933                 /*
934                  * Skip if visible but not ready, or special (e.g.
935                  * mp->mnt_syncer) 
936                  */
937                 if (vp->v_type == VNON)
938                         goto next;
939                 KKASSERT(vp->v_mount == mp);
940
941                 /*
942                  * Quick test.  A negative return continues the loop without
943                  * calling the slow test.  0 continues onto the slow test.
944                  * A positive number aborts the loop.
945                  */
946                 if (fastfunc) {
947                         if ((r = fastfunc(mp, vp, data)) < 0)
948                                 goto next;
949                         if (r)
950                                 break;
951                 }
952
953                 /*
954                  * Get a vxlock on the vnode, retry if it has moved or isn't
955                  * in the mountlist where we expect it.
956                  */
957                 if (slowfunc) {
958                         int error;
959
960                         switch(flags & (VMSC_GETVP|VMSC_GETVX|VMSC_NOWAIT)) {
961                         case VMSC_GETVP:
962                                 error = vget(vp, LK_EXCLUSIVE);
963                                 break;
964                         case VMSC_GETVP|VMSC_NOWAIT:
965                                 error = vget(vp, LK_EXCLUSIVE|LK_NOWAIT);
966                                 break;
967                         case VMSC_GETVX:
968                                 vx_get(vp);
969                                 error = 0;
970                                 break;
971                         default:
972                                 error = 0;
973                                 break;
974                         }
975                         if (error)
976                                 goto next;
977                         /*
978                          * Do not call the slow function if the vnode is
979                          * invalid or if it was ripped out from under us
980                          * while we (potentially) blocked.
981                          */
982                         if (info.vp == vp && vp->v_type != VNON)
983                                 r = slowfunc(mp, vp, data);
984
985                         /*
986                          * Cleanup
987                          */
988                         switch(flags & (VMSC_GETVP|VMSC_GETVX|VMSC_NOWAIT)) {
989                         case VMSC_GETVP:
990                         case VMSC_GETVP|VMSC_NOWAIT:
991                                 vput(vp);
992                                 break;
993                         case VMSC_GETVX:
994                                 vx_put(vp);
995                                 break;
996                         default:
997                                 break;
998                         }
999                         if (r != 0)
1000                                 break;
1001                 }
1002
1003 next:
1004                 /*
1005                  * Yield after some processing.  Depending on the number
1006                  * of vnodes, we might wind up running for a long time.
1007                  * Because threads are not preemptable, time critical
1008                  * userland processes might starve.  Give them a chance
1009                  * now and then.
1010                  */
1011                 if (++count == 10000) {
1012                         /* We really want to yield a bit, so we simply sleep a tick */
1013                         tsleep(mp, 0, "vnodescn", 1);
1014                         count = 0;
1015                 }
1016
1017                 /*
1018                  * If doing one pass this decrements to zero.  If it starts
1019                  * at zero it is effectively unlimited for the purposes of
1020                  * this loop.
1021                  */
1022                 if (--stopcount == 0)
1023                         break;
1024
1025                 /*
1026                  * Iterate.  If the vnode was ripped out from under us
1027                  * info.vp will already point to the next vnode, otherwise
1028                  * we have to obtain the next valid vnode ourselves.
1029                  */
1030                 if (info.vp == vp)
1031                         info.vp = TAILQ_NEXT(vp, v_nmntvnodes);
1032         }
1033         TAILQ_REMOVE(&mntvnodescan_list, &info, entry);
1034         lwkt_reltoken(&ilock);
1035         return(r);
1036 }
1037
1038 /*
1039  * Remove any vnodes in the vnode table belonging to mount point mp.
1040  *
1041  * If FORCECLOSE is not specified, there should not be any active ones,
1042  * return error if any are found (nb: this is a user error, not a
1043  * system error). If FORCECLOSE is specified, detach any active vnodes
1044  * that are found.
1045  *
1046  * If WRITECLOSE is set, only flush out regular file vnodes open for
1047  * writing.
1048  *
1049  * SKIPSYSTEM causes any vnodes marked VSYSTEM to be skipped.
1050  *
1051  * `rootrefs' specifies the base reference count for the root vnode
1052  * of this filesystem. The root vnode is considered busy if its
1053  * v_sysref.refcnt exceeds this value. On a successful return, vflush()
1054  * will call vrele() on the root vnode exactly rootrefs times.
1055  * If the SKIPSYSTEM or WRITECLOSE flags are specified, rootrefs must
1056  * be zero.
1057  */
1058 #ifdef DIAGNOSTIC
1059 static int busyprt = 0;         /* print out busy vnodes */
1060 SYSCTL_INT(_debug, OID_AUTO, busyprt, CTLFLAG_RW, &busyprt, 0, "");
1061 #endif
1062
1063 static int vflush_scan(struct mount *mp, struct vnode *vp, void *data);
1064
1065 struct vflush_info {
1066         int flags;
1067         int busy;
1068         thread_t td;
1069 };
1070
1071 int
1072 vflush(struct mount *mp, int rootrefs, int flags)
1073 {
1074         struct thread *td = curthread;  /* XXX */
1075         struct vnode *rootvp = NULL;
1076         int error;
1077         struct vflush_info vflush_info;
1078
1079         if (rootrefs > 0) {
1080                 KASSERT((flags & (SKIPSYSTEM | WRITECLOSE)) == 0,
1081                     ("vflush: bad args"));
1082                 /*
1083                  * Get the filesystem root vnode. We can vput() it
1084                  * immediately, since with rootrefs > 0, it won't go away.
1085                  */
1086                 if ((error = VFS_ROOT(mp, &rootvp)) != 0)
1087                         return (error);
1088                 vput(rootvp);
1089         }
1090
1091         vflush_info.busy = 0;
1092         vflush_info.flags = flags;
1093         vflush_info.td = td;
1094         vmntvnodescan(mp, VMSC_GETVX, NULL, vflush_scan, &vflush_info);
1095
1096         if (rootrefs > 0 && (flags & FORCECLOSE) == 0) {
1097                 /*
1098                  * If just the root vnode is busy, and if its refcount
1099                  * is equal to `rootrefs', then go ahead and kill it.
1100                  */
1101                 KASSERT(vflush_info.busy > 0, ("vflush: not busy"));
1102                 KASSERT(rootvp->v_sysref.refcnt >= rootrefs, ("vflush: rootrefs"));
1103                 if (vflush_info.busy == 1 && rootvp->v_sysref.refcnt == rootrefs) {
1104                         vx_lock(rootvp);
1105                         vgone_vxlocked(rootvp);
1106                         vx_unlock(rootvp);
1107                         vflush_info.busy = 0;
1108                 }
1109         }
1110         if (vflush_info.busy)
1111                 return (EBUSY);
1112         for (; rootrefs > 0; rootrefs--)
1113                 vrele(rootvp);
1114         return (0);
1115 }
1116
1117 /*
1118  * The scan callback is made with an VX locked vnode.
1119  */
1120 static int
1121 vflush_scan(struct mount *mp, struct vnode *vp, void *data)
1122 {
1123         struct vflush_info *info = data;
1124         struct vattr vattr;
1125
1126         /*
1127          * Skip over a vnodes marked VSYSTEM.
1128          */
1129         if ((info->flags & SKIPSYSTEM) && (vp->v_flag & VSYSTEM)) {
1130                 return(0);
1131         }
1132
1133         /*
1134          * If WRITECLOSE is set, flush out unlinked but still open
1135          * files (even if open only for reading) and regular file
1136          * vnodes open for writing. 
1137          */
1138         if ((info->flags & WRITECLOSE) &&
1139             (vp->v_type == VNON ||
1140             (VOP_GETATTR(vp, &vattr) == 0 &&
1141             vattr.va_nlink > 0)) &&
1142             (vp->v_writecount == 0 || vp->v_type != VREG)) {
1143                 return(0);
1144         }
1145
1146         /*
1147          * If we are the only holder (refcnt of 1) or the vnode is in
1148          * termination (refcnt < 0), we can vgone the vnode.
1149          */
1150         if (vp->v_sysref.refcnt <= 1) {
1151                 vgone_vxlocked(vp);
1152                 return(0);
1153         }
1154
1155         /*
1156          * If FORCECLOSE is set, forcibly close the vnode. For block
1157          * or character devices, revert to an anonymous device. For
1158          * all other files, just kill them.
1159          */
1160         if (info->flags & FORCECLOSE) {
1161                 if (vp->v_type != VBLK && vp->v_type != VCHR) {
1162                         vgone_vxlocked(vp);
1163                 } else {
1164                         vclean_vxlocked(vp, 0);
1165                         vp->v_ops = &spec_vnode_vops_p;
1166                         insmntque(vp, NULL);
1167                 }
1168                 return(0);
1169         }
1170 #ifdef DIAGNOSTIC
1171         if (busyprt)
1172                 vprint("vflush: busy vnode", vp);
1173 #endif
1174         ++info->busy;
1175         return(0);
1176 }
1177
1178 void
1179 add_bio_ops(struct bio_ops *ops)
1180 {
1181         TAILQ_INSERT_TAIL(&bio_ops_list, ops, entry);
1182 }
1183
1184 void
1185 rem_bio_ops(struct bio_ops *ops)
1186 {
1187         TAILQ_REMOVE(&bio_ops_list, ops, entry);
1188 }
1189
1190 /*
1191  * This calls the bio_ops io_sync function either for a mount point
1192  * or generally.
1193  *
1194  * WARNING: softdeps is weirdly coded and just isn't happy unless
1195  * io_sync is called with a NULL mount from the general syncing code.
1196  */
1197 void
1198 bio_ops_sync(struct mount *mp)
1199 {
1200         struct bio_ops *ops;
1201
1202         if (mp) {
1203                 if ((ops = mp->mnt_bioops) != NULL)
1204                         ops->io_sync(mp);
1205         } else {
1206                 TAILQ_FOREACH(ops, &bio_ops_list, entry) {
1207                         ops->io_sync(NULL);
1208                 }
1209         }
1210 }
1211