2 * Copyright (c) 1997, 1998, 1999
3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
32 * $FreeBSD: src/sys/dev/an/if_an_pci.c,v 1.2.2.8 2003/02/11 03:32:48 ambrisko Exp $
33 * $DragonFly: src/sys/dev/netif/an/if_an_pci.c,v 1.5 2004/03/14 15:36:48 joerg Exp $
35 * $FreeBSD: src/sys/dev/an/if_an_pci.c,v 1.2.2.8 2003/02/11 03:32:48 ambrisko Exp $
39 * This is a PCI shim for the Aironet PC4500/4800 wireless network
40 * driver. Aironet makes PCMCIA, ISA and PCI versions of these devices,
41 * which all have basically the same interface. The ISA and PCI cards
42 * are actually bridge adapters with PCMCIA cards inserted into them,
43 * however they appear as normal PCI or ISA devices to the host.
45 * All we do here is handle the PCI probe and attach and set up an
46 * interrupt handler entry point. The PCI version of the card uses
47 * a PLX 9050 PCI to "dumb bus" bridge chip, which provides us with
48 * multiple PCI address space mappings. The primary mapping at PCI
49 * register 0x14 is for the PLX chip itself, *NOT* the Aironet card.
50 * The I/O address of the Aironet is actually at register 0x18, which
51 * is the local bus mapping register for bus space 0. There are also
52 * registers for additional register spaces at registers 0x1C and
53 * 0x20, but these are unused in the Aironet devices. To find out
54 * more, you need a datasheet for the 9050 from PLX, but you have
55 * to go through their sales office to get it. Bleh.
64 #include <sys/param.h>
65 #include <sys/systm.h>
66 #include <sys/sockio.h>
68 #include <sys/malloc.h>
69 #include <sys/kernel.h>
70 #include <sys/socket.h>
72 #include <sys/module.h>
74 #include <machine/bus.h>
76 #include <machine/resource.h>
79 #include <net/if_arp.h>
80 #include <net/ethernet.h>
81 #include <net/if_dl.h>
82 #include <net/if_media.h>
84 #include <bus/pci/pcireg.h>
85 #include <bus/pci/pcivar.h>
87 #include "if_aironet_ieee.h"
96 #define AIRONET_VENDORID 0x14B9
97 #define AIRONET_DEVICEID_35x 0x0350
98 #define AIRONET_DEVICEID_4500 0x4500
99 #define AIRONET_DEVICEID_4800 0x4800
100 #define AIRONET_DEVICEID_4xxx 0x0001
101 #define AIRONET_DEVICEID_MPI350 0xA504
102 #define AN_PCI_PLX_LOIO 0x14 /* PLX chip iobase */
103 #define AN_PCI_LOIO 0x18 /* Aironet iobase */
105 static struct an_type an_devs[] = {
106 { AIRONET_VENDORID, AIRONET_DEVICEID_35x, "Cisco Aironet 350 Series" },
107 { AIRONET_VENDORID, AIRONET_DEVICEID_4500, "Aironet PCI4500" },
108 { AIRONET_VENDORID, AIRONET_DEVICEID_4800, "Aironet PCI4800" },
109 { AIRONET_VENDORID, AIRONET_DEVICEID_4xxx, "Aironet PCI4500/PCI4800" },
113 static int an_probe_pci (device_t);
114 static int an_attach_pci (device_t);
115 static int an_detach_pci (device_t);
116 static int an_suspend_pci (device_t);
117 static int an_resume_pci (device_t);
120 an_probe_pci(device_t dev)
126 while (t->an_name != NULL) {
127 if (pci_get_vendor(dev) == t->an_vid &&
128 pci_get_device(dev) == t->an_did) {
129 device_set_desc(dev, t->an_name);
135 if (pci_get_vendor(dev) == AIRONET_VENDORID &&
136 pci_get_device(dev) == AIRONET_DEVICEID_MPI350) {
137 device_set_desc(dev, "Cisco Aironet MPI350");
151 int unit, flags, error = 0;
155 sc = device_get_softc(dev);
156 unit = device_get_unit(dev);
157 flags = device_get_flags(dev);
158 bzero(sc, sizeof(struct an_softc));
160 if (pci_get_vendor(dev) == AIRONET_VENDORID &&
161 pci_get_device(dev) == AIRONET_DEVICEID_MPI350) {
163 sc->port_rid = PCIR_MAPS;
166 * Map control/status registers.
168 command = pci_read_config(dev, PCIR_COMMAND, 4);
169 command |= PCIM_CMD_PORTEN;
170 pci_write_config(dev, PCIR_COMMAND, command, 4);
171 command = pci_read_config(dev, PCIR_COMMAND, 4);
173 if (!(command & PCIM_CMD_PORTEN)) {
174 printf("an%d: failed to enable I/O ports!\n", unit);
178 sc->port_rid = AN_PCI_LOIO;
180 error = an_alloc_port(dev, sc->port_rid, 1);
183 printf("an%d: couldn't map ports\n", unit);
187 sc->an_btag = rman_get_bustag(sc->port_res);
188 sc->an_bhandle = rman_get_bushandle(sc->port_res);
190 /* Allocate memory for MPI350 */
192 /* Allocate memory */
193 sc->mem_rid = PCIR_MAPS + 4;
194 error = an_alloc_memory(dev, sc->mem_rid, 1);
196 printf("an%d: couldn't map memory\n", unit);
199 sc->an_mem_btag = rman_get_bustag(sc->mem_res);
200 sc->an_mem_bhandle = rman_get_bushandle(sc->mem_res);
202 /* Allocate aux. memory */
203 sc->mem_aux_rid = PCIR_MAPS + 8;
204 error = an_alloc_aux_memory(dev, sc->mem_aux_rid,
207 printf("an%d: couldn't map aux memory\n", unit);
210 sc->an_mem_aux_btag = rman_get_bustag(sc->mem_aux_res);
211 sc->an_mem_aux_bhandle = rman_get_bushandle(sc->mem_aux_res);
213 /* Allocate DMA region */
214 error = bus_dma_tag_create(NULL, /* parent */
215 1, 0, /* alignment, bounds */
216 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
217 BUS_SPACE_MAXADDR, /* highaddr */
218 NULL, NULL, /* filter, filterarg */
219 0x3ffff, /* maxsize XXX */
221 0xffff, /* maxsegsize XXX */
222 BUS_DMA_ALLOCNOW, /* flags */
225 printf("an%d: couldn't get DMA region\n", unit);
230 /* Allocate interrupt */
231 error = an_alloc_irq(dev, 0, RF_SHAREABLE);
236 error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET,
237 an_intr, sc, &sc->irq_handle);
243 error = an_attach(sc, device_get_unit(dev), flags);
247 an_release_resources(dev);
254 an_detach_pci(device_t dev)
256 struct an_softc *sc = device_get_softc(dev);
257 struct ifnet *ifp = &sc->arpcom.ac_if;
260 ifmedia_removeall(&sc->an_ifmedia);
262 bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
263 an_release_resources(dev);
269 an_suspend_pci(device_t dev)
277 an_resume_pci(device_t dev)
284 static device_method_t an_pci_methods[] = {
285 /* Device interface */
286 DEVMETHOD(device_probe, an_probe_pci),
287 DEVMETHOD(device_attach, an_attach_pci),
288 DEVMETHOD(device_detach, an_detach_pci),
289 DEVMETHOD(device_shutdown, an_shutdown),
290 DEVMETHOD(device_suspend, an_suspend_pci),
291 DEVMETHOD(device_resume, an_resume_pci),
295 static driver_t an_pci_driver = {
298 sizeof(struct an_softc),
301 static devclass_t an_devclass;
303 DRIVER_MODULE(if_an, pci, an_pci_driver, an_devclass, 0, 0);