2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
3 # $DragonFly: src/Makefile.inc1,v 1.4 2003/08/05 07:45:39 asmodai Exp $
5 # Make command line options:
6 # -DMAKE_KERBEROS5 to build Kerberos5
7 # -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8 # -DNOCLEAN do not clean at all
9 # -DNOCRYPT will prevent building of crypt versions
10 # -DNOMAN do not build the manual pages
11 # -DNOPROFILE do not build profiled libraries
12 # -DNOGAMES do not go into games subdir
13 # -DNOSHARE do not go into share subdir
14 # -DNOINFO do not make or install info files
15 # -DNOLIBC_R do not build libc_r.
16 # -DNO_FORTRAN do not build g77 and related libraries.
17 # -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18 # -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19 # -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20 # -DNO_PORTSUPDATE do not update ports in ${MAKE} update
21 # -DNO_DOCUPDATE do not update doc in ${MAKE} update
22 # LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
23 # TARGET_ARCH="arch" to crossbuild world to a different arch
26 # The intended user-driven targets are:
27 # buildworld - rebuild *everything*, including glue to help do upgrades
28 # installworld- install everything built by "buildworld"
29 # update - convenient way to update your source tree (eg: sup/cvs)
30 # most - build user commands, no libraries or include files
31 # installmost - install user commands, no libraries or include files
33 # Standard targets (not defined here) are documented in the makefiles in
34 # /usr/share/mk. These include:
35 # obj depend all install clean cleandepend cleanobj
37 # Put initial settings here.
40 # We must do share/info early so that installation of info `dir'
41 # entries works correctly. Do it first since it is less likely to
42 # grow dependencies on include and lib than vice versa.
43 .if exists(${.CURDIR}/share/info)
47 # We must do include and lib early so that the perl *.ph generation
48 # works correctly as it uses the header files installed by this.
49 .if exists(${.CURDIR}/include)
52 .if exists(${.CURDIR}/lib)
56 .if exists(${.CURDIR}/bin)
59 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
62 .if exists(${.CURDIR}/gnu)
65 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
66 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
69 .if exists(${.CURDIR}/libexec)
72 .if exists(${.CURDIR}/sbin)
75 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
78 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
81 .if exists(${.CURDIR}/sys)
84 .if exists(${.CURDIR}/usr.bin)
87 .if exists(${.CURDIR}/usr.sbin)
91 # etc must be last for "distribute" to work
92 .if exists(${.CURDIR}/etc)
96 # These are last, since it is nice to at least get the base system
97 # rebuilt before you do them.
98 .if defined(LOCAL_DIRS)
99 .for _DIR in ${LOCAL_DIRS}
100 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
106 .if defined(SUBDIR_OVERRIDE)
107 SUBDIR= ${SUBDIR_OVERRIDE}
110 .if defined(NOCLEANDIR)
111 CLEANDIR= clean cleandepend
116 SUP?= /usr/local/bin/cvsup
117 SUPFLAGS?= -g -L 2 -P -
119 SUPFLAGS+= -h ${SUPHOST}
122 MAKEOBJDIRPREFIX?= /usr/obj
123 TARGET_ARCH?= ${MACHINE_ARCH}
124 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
127 TARGET?= ${TARGET_ARCH}
130 BUILD_ARCH!= sysctl -n hw.machine_arch
131 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
132 .error To cross-build, set TARGET_ARCH.
135 .if ${MACHINE} == ${TARGET}
136 OBJTREE= ${MAKEOBJDIRPREFIX}
138 OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET}
140 WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
141 # /usr/games added for fortune which depend on strfile
142 STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
143 TMPPATH= ${STRICTTMPPATH}:${PATH}
144 OBJFORMAT_PATH?= /usr/libexec
148 INSTALLTMP= ${TMPDIR}/install.${TMPPID}
151 # Building a world goes through the following stages
153 # 1. bootstrap-tool stage [BMAKE]
154 # This stage is responsible for creating programs that
155 # are needed for backward compatibility reasons. They
156 # are not built as cross-tools.
157 # 2. build-tool stage [TMAKE]
158 # This stage is responsible for creating the object
159 # tree and building any tools that are needed during
161 # 3. cross-tool stage [XMAKE]
162 # This stage is responsible for creating any tools that
163 # are needed for cross-builds. A cross-compiler is one
165 # 4. world stage [WMAKE]
166 # This stage actually builds the world.
167 # 5. install stage (optional) [IMAKE]
168 # This stage installs a previously built world.
171 # Common environment for world related stages
172 CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
173 MACHINE_ARCH=${TARGET_ARCH} \
175 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
176 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.00503 \
177 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
178 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
179 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
181 # bootstrap-tool stage
182 BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
184 INSTALL="sh ${.CURDIR}/tools/install.sh"
185 BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
186 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
190 TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
192 INSTALL="sh ${.CURDIR}/tools/install.sh"
193 TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING
196 XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
199 WMAKEENV= ${CROSSENV} \
200 DESTDIR=${WORLDTMP} \
201 INSTALL="sh ${.CURDIR}/tools/install.sh" \
203 WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
206 IMAKEENV= ${CROSSENV} \
207 PATH=${STRICTTMPPATH}:${INSTALLTMP}
208 IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
211 KMAKEENV= ${WMAKEENV} \
212 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
214 USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
215 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
217 usr/share/groff_font/devX100 \
218 usr/share/groff_font/devX100-12 \
219 usr/share/groff_font/devX75 \
220 usr/share/groff_font/devX75-12 \
221 usr/share/groff_font/devascii \
222 usr/share/groff_font/devcp1047 \
223 usr/share/groff_font/devdvi \
224 usr/share/groff_font/devhtml \
225 usr/share/groff_font/devkoi8-r \
226 usr/share/groff_font/devlatin1 \
227 usr/share/groff_font/devlbp \
228 usr/share/groff_font/devlj4 \
229 usr/share/groff_font/devps \
230 usr/share/groff_font/devutf8 \
231 usr/share/tmac/mdoc usr/share/tmac/mm
233 INCDIRS= arpa dev fs g++/std isc isofs libmilter objc openssl \
234 protocols readline rpc rpcsvc security ufs
239 # Attempt to rebuild the entire system, with reasonable chance of
240 # success, regardless of how old your existing system is.
244 @echo "--------------------------------------------------------------"
245 @echo ">>> Rebuilding the temporary build tree"
246 @echo "--------------------------------------------------------------"
247 .if !defined(NOCLEAN)
250 # XXX - These two can depend on any header file.
251 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
252 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
254 .for _dir in ${USRDIRS}
255 mkdir -p ${WORLDTMP}/${_dir}
257 .for _dir in ${INCDIRS}
258 mkdir -p ${WORLDTMP}/usr/include/${_dir}
260 ln -sf ${.CURDIR}/sys ${WORLDTMP}
263 @echo "--------------------------------------------------------------"
264 @echo ">>> stage 1: bootstrap tools"
265 @echo "--------------------------------------------------------------"
266 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
268 .if !defined(NOCLEAN)
270 @echo "--------------------------------------------------------------"
271 @echo ">>> stage 2: cleaning up the object tree"
272 @echo "--------------------------------------------------------------"
273 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
277 @echo "--------------------------------------------------------------"
278 @echo ">>> stage 2: rebuilding the object tree"
279 @echo "--------------------------------------------------------------"
280 cd ${.CURDIR}; ${WMAKE} par-obj
283 @echo "--------------------------------------------------------------"
284 @echo ">>> stage 2: build tools"
285 @echo "--------------------------------------------------------------"
286 cd ${.CURDIR}; ${TMAKE} build-tools
289 @echo "--------------------------------------------------------------"
290 @echo ">>> stage 3: cross tools"
291 @echo "--------------------------------------------------------------"
292 cd ${.CURDIR}; ${XMAKE} cross-tools
295 @echo "--------------------------------------------------------------"
296 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
297 @echo "--------------------------------------------------------------"
298 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
301 @echo "--------------------------------------------------------------"
302 @echo ">>> stage 4: building libraries"
303 @echo "--------------------------------------------------------------"
304 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
307 @echo "--------------------------------------------------------------"
308 @echo ">>> stage 4: make dependencies"
309 @echo "--------------------------------------------------------------"
310 cd ${.CURDIR}; ${WMAKE} par-depend
313 @echo "--------------------------------------------------------------"
314 @echo ">>> stage 4: building everything.."
315 @echo "--------------------------------------------------------------"
316 cd ${.CURDIR}; ${WMAKE} all
320 .if !defined(SUBDIR_OVERRIDE)
321 WMAKE_TGTS+= _worldtmp _bootstrap-tools
323 WMAKE_TGTS+= _cleanobj _obj _build-tools
324 .if !defined(SUBDIR_OVERRIDE)
325 WMAKE_TGTS+= _cross-tools
327 WMAKE_TGTS+= _includes _libraries _depend everything
329 buildworld: ${WMAKE_TGTS}
330 .ORDER: ${WMAKE_TGTS}
335 # Checks to be sure system is ready for installworld
338 .if !defined(NO_SENDMAIL)
339 @if ! `grep -q '^smmsp:' /etc/passwd`; then \
340 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
343 @if ! `grep -q '^smmsp:' /etc/group`; then \
344 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
352 # Distributes everything compiled by a `buildworld'.
356 # Installs everything compiled by a 'buildworld'.
358 distributeworld installworld: installcheck
359 mkdir -p ${INSTALLTMP}
360 for prog in [ awk cap_mkdb cat chflags chmod chown \
361 date echo egrep find grep \
362 ln make makewhatis mkdir mtree mv perl pwd_mkdb rm sed sh sysctl \
363 test true uname wc zic; do \
364 cp `which $$prog` ${INSTALLTMP}; \
366 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
372 # If you have a build server, you can NFS mount the source and obj directories
373 # and do a 'make reinstall' on the *client* to install new binaries from the
374 # most recent server build.
377 @echo "--------------------------------------------------------------"
378 @echo ">>> Making hierarchy"
379 @echo "--------------------------------------------------------------"
380 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
382 @echo "--------------------------------------------------------------"
383 @echo ">>> Installing everything.."
384 @echo "--------------------------------------------------------------"
385 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
386 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
388 @echo "--------------------------------------------------------------"
389 @echo ">>> Rebuilding man page indices"
390 @echo "--------------------------------------------------------------"
391 cd ${.CURDIR}/share/man; ${MAKE} makedb
395 @echo "--------------------------------------------------------------"
396 @echo ">>> Distributing everything.."
397 @echo "--------------------------------------------------------------"
398 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
401 # buildkernel and installkernel
403 # Which kernels to build and/or install is specified by setting
404 # KERNCONF. If not defined a GENERIC kernel is built/installed.
405 # Only the existing (depending TARGET) config files are used
406 # for building kernels and only the first of these is designated
407 # as the one being installed.
409 # Note that we have to use TARGET instead of TARGET_ARCH when
410 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
411 # be set to cross-build, we have to make sure TARGET is set
414 .if !defined(KERNCONF) && defined(KERNEL)
420 INSTKERNNAME?= kernel
422 KRNLSRCDIR= ${.CURDIR}/sys
423 KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf
424 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
425 KERNCONFDIR?= ${KRNLCONFDIR}
429 .for _kernel in ${KERNCONF}
430 .if exists(${KERNCONFDIR}/${_kernel})
431 BUILDKERNELS+= ${_kernel}
432 .if empty(INSTALLKERNEL)
433 INSTALLKERNEL= ${_kernel}
441 # Builds all kernels defined by BUILDKERNELS.
444 .if empty(BUILDKERNELS)
445 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
448 .if defined(KERNWARN)
449 @echo "--------------------------------------------------------------"
450 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
451 @echo "--------------------------------------------------------------"
455 .for _kernel in ${BUILDKERNELS}
456 @echo "--------------------------------------------------------------"
457 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
458 @echo "--------------------------------------------------------------"
459 @echo "===> ${_kernel}"
460 mkdir -p ${KRNLOBJDIR}
461 .if !defined(NO_KERNELCONFIG)
464 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
465 ${KERNCONFDIR}/${_kernel}
467 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
468 cd ${KRNLOBJDIR}/${_kernel}; \
469 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
470 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
471 cd ${KRNLOBJDIR}/${_kernel}; \
472 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
475 cd ${KRNLOBJDIR}/${_kernel}; \
476 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
477 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
478 .if !defined(NO_KERNELDEPEND)
479 cd ${KRNLOBJDIR}/${_kernel}; \
480 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
482 cd ${KRNLOBJDIR}/${_kernel}; \
483 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
484 @echo "--------------------------------------------------------------"
485 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
486 @echo "--------------------------------------------------------------"
492 # Install the kernel defined by INSTALLKERNEL
494 installkernel reinstallkernel:
495 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
496 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
501 # Update the source tree, by running sup and/or running cvs to update to the
505 .if defined(SUP_UPDATE)
506 @echo "--------------------------------------------------------------"
507 @echo ">>> Running ${SUP}"
508 @echo "--------------------------------------------------------------"
510 @${SUP} ${SUPFLAGS} ${SUPFILE}
512 .if defined(SUPFILE1)
513 @${SUP} ${SUPFLAGS} ${SUPFILE1}
515 .if defined(SUPFILE2)
516 @${SUP} ${SUPFLAGS} ${SUPFILE2}
518 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
519 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
521 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
522 @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
525 .if defined(CVS_UPDATE)
526 @echo "--------------------------------------------------------------"
527 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
528 @echo "--------------------------------------------------------------"
529 cd ${.CURDIR}; cvs -q update -rRELENG_4 -P -d
535 # Build most of the user binaries on the existing system libs and includes.
538 @echo "--------------------------------------------------------------"
539 @echo ">>> Building programs only"
540 @echo "--------------------------------------------------------------"
541 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
542 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
548 # Install the binaries built by the 'most' target. This does not include
549 # libraries or include files.
552 @echo "--------------------------------------------------------------"
553 @echo ">>> Installing programs only"
554 @echo "--------------------------------------------------------------"
555 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
556 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
560 # ------------------------------------------------------------------------
562 # From here onwards are utility targets used by the 'make world' and
563 # related targets. If your 'world' breaks, you may like to try to fix
564 # the problem and manually run the following targets to attempt to
565 # complete the build. Beware, this is *not* guaranteed to work, you
566 # need to have a pretty good grip on the current state of the system
567 # to attempt to manually finish it. If in doubt, 'make world' again.
571 # bootstrap-tools: Build tools needed for compatibility
573 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
574 _strfile= games/fortune/strfile
578 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \
579 usr.bin/uudecode usr.bin/xinstall \
581 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
582 ${ECHODIR} "===> ${_tool}"; \
583 cd ${.CURDIR}/${_tool}; \
584 ${MAKE} DIRPRFX=${_tool}/ obj; \
585 ${MAKE} DIRPRFX=${_tool}/ depend; \
586 ${MAKE} DIRPRFX=${_tool}/ all; \
587 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
591 # build-tools: Build special purpose build tools
593 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
594 _games= games/adventure games/hack games/phantasia
597 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
598 _share= share/syscons/scrnmaps
601 .if !defined(NO_FORTRAN)
602 _fortran= gnu/usr.bin/cc/f771
606 _perl= gnu/usr.bin/perl/miniperl
609 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
610 !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
611 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
612 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
615 .if defined(RELEASEDIR)
616 _sysinstall= release/sysinstall
620 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
621 ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
622 usr.bin/awk usr.bin/file ${_sysinstall}
623 ${ECHODIR} "===> ${_tool}"; \
624 cd ${.CURDIR}/${_tool}; \
625 ${MAKE} DIRPRFX=${_tool}/ obj; \
626 ${MAKE} DIRPRFX=${_tool}/ build-tools
630 # cross-tools: Build cross-building tools
632 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
633 _elf2exe= usr.sbin/elf2exe
636 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
637 _btxld= usr.sbin/btxld
641 .for _tool in ${_btxld} ${_elf2exe} usr.bin/genassym usr.bin/gensetdefs \
642 gnu/usr.bin/binutils usr.bin/objformat usr.sbin/crunch/crunchide \
644 ${ECHODIR} "===> ${_tool}"; \
645 cd ${.CURDIR}/${_tool}; \
646 ${MAKE} DIRPRFX=${_tool}/ obj; \
647 ${MAKE} DIRPRFX=${_tool}/ depend; \
648 ${MAKE} DIRPRFX=${_tool}/ all; \
649 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
653 # hierarchy - ensure that all the needed directories are present
656 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
659 # libraries - build all libraries, and install them under ${DESTDIR}.
661 # The list of libraries with dependents (${_prebuild_libs}) and their
662 # interdependencies (__L) are built automatically by the
663 # ${.CURDIR}/tools/make_libdeps.sh script.
667 ${MAKE} -f Makefile.inc1 _startup_libs; \
668 ${MAKE} -f Makefile.inc1 _prebuild_libs; \
669 ${MAKE} -f Makefile.inc1 _generic_libs;
671 # These dependencies are not automatically generated:
673 # gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
674 # shared libraries for ELF.
676 _startup_libs= gnu/lib/csu gnu/lib/libgcc
677 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-${OBJFORMAT})
678 _startup_libs+= lib/csu/${MACHINE_ARCH}-${OBJFORMAT}
680 _startup_libs+= lib/csu/${MACHINE_ARCH}
685 _generic_libs= gnu/lib
688 _generic_libs+= gnu/usr.bin/perl/libperl
691 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
692 _prebuild_libs+= kerberos5/lib/libasn1
693 _prebuild_libs+= kerberos5/lib/libgssapi
694 _prebuild_libs+= kerberos5/lib/libkrb5
695 _prebuild_libs+= kerberos5/lib/libroken
696 _generic_libs+= kerberos5/lib
699 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
700 lib/libncurses lib/libopie lib/libradius lib/libskey \
701 lib/libtacplus lib/libutil \
704 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
705 lib/libskey__L: lib/libcrypt__L lib/libmd__L
709 .if !defined(NOCRYPT)
710 .if !defined(NO_OPENSSL)
711 _prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
712 .if !defined(NO_OPENSSH)
713 _prebuild_libs+= secure/lib/libssh
714 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
717 _generic_libs+= secure/lib
720 _generic_libs+= usr.bin/lex/lib
722 .if ${MACHINE_ARCH} == "i386"
723 _generic_libs+= usr.sbin/pcvt/keycap
726 .for _lib in ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
728 .if exists(${.CURDIR}/${_lib})
729 ${ECHODIR} "===> ${_lib}"; \
730 cd ${.CURDIR}/${_lib}; \
731 ${MAKE} DIRPRFX=${_lib}/ depend; \
732 ${MAKE} DIRPRFX=${_lib}/ all; \
733 ${MAKE} DIRPRFX=${_lib}/ install
737 _startup_libs: ${_startup_libs:S/$/__L/}
738 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
739 _generic_libs: ${_generic_libs:S/$/__L/}
741 .for __target in clean cleandepend cleandir depend includes obj
742 .for entry in ${SUBDIR}
743 ${entry}.${__target}__D: .PHONY
744 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
745 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
746 edir=${entry}.${MACHINE_ARCH}; \
747 cd ${.CURDIR}/$${edir}; \
749 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
751 cd ${.CURDIR}/$${edir}; \
753 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
755 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
758 .include <bsd.subdir.mk>