Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 #
   4 # This file defines the user-driven targets.
   5 #
   6 # Standard targets are documented in the makefiles in /usr/share/mk and include:
   7 #       obj depend all install clean cleandepend cleanobj
   8 #
   9 # Build-time options are documented in make.conf(5).
  10 #
  11
  12 DFLYVERSION!=   awk '/^\#define[[:blank:]]__DragonFly_version/ {print $$3}' \
  13                 < ${.CURDIR}/sys/sys/param.h
  14
  15 OSREL!=         echo ${DFLYVERSION} | \
  16                 awk '{a=int($$1/100000); b=int(($$1-(a*100000))/100); \
  17                 print a "." b}'
  18
  19 # Put initial settings here.
  20 SUBDIR=
  21
  22 # /libexec/ld-elf.so.2 needs to be installed first
  23 # Otherwise, install(1) beeing a dynamically linked binary will fail
  24 # during the first upgrade from a static to a dynamic world
  25 .if exists(${.CURDIR}/libexec)
  26 SUBDIR+= libexec
  27 .endif
  28
  29 # We need to do include and lib early.
  30 #
  31 .if exists(${.CURDIR}/include)
  32 SUBDIR+= include
  33 .endif
  34 .if exists(${.CURDIR}/lib)
  35 SUBDIR+= lib
  36 .endif
  37
  38 .if exists(${.CURDIR}/bin)
  39 SUBDIR+= bin
  40 .endif
  41 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
  42 SUBDIR+= games
  43 .endif
  44 .if exists(${.CURDIR}/gnu)
  45 SUBDIR+= gnu
  46 .endif
  47 .if exists(${.CURDIR}/sbin)
  48 SUBDIR+= sbin
  49 .endif
  50 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
  51 SUBDIR+= share
  52 .endif
  53 .if exists(${.CURDIR}/sys)
  54 SUBDIR+= sys
  55 .endif
  56 .if exists(${.CURDIR}/usr.bin)
  57 SUBDIR+= usr.bin
  58 .endif
  59 .if exists(${.CURDIR}/usr.sbin)
  60 SUBDIR+= usr.sbin
  61 .endif
  62
  63 .if exists(${.CURDIR}/etc)
  64 SUBDIR+= etc
  65 .endif
  66
  67 # These are last, since it is nice to at least get the base system
  68 # rebuilt before you do them.
  69 .if defined(LOCAL_DIRS)
  70 .for _DIR in ${LOCAL_DIRS}
  71 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
  72 SUBDIR+= ${_DIR}
  73 .endif
  74 .endfor
  75 .endif
  76
  77 .if defined(SUBDIR_OVERRIDE)
  78 SUBDIR=         ${SUBDIR_OVERRIDE}
  79 .endif
  80
  81 .if defined(NOCLEANDIR)
  82 CLEANDIR=       clean cleandepend
  83 .else
  84 CLEANDIR=       cleandir
  85 .endif
  86
  87 .if defined(NO_CLEAN)
  88 NOCLEAN=        # defined
  89 .endif
  90
  91 # Object directory base in primary make.  Note that when we rerun make
  92 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
  93 # subdirectory because the rest of the build system needs it that way.
  94 # The original object directory base is saved in OBJTREE.
  95 #
  96 MAKEOBJDIRPREFIX?=      /usr/obj
  97 OBJTREE?=               ${MAKEOBJDIRPREFIX}
  98
  99 # Used for stage installs and pathing
 100 #
 101 DESTDIRBASE:=           ${OBJTREE}${.CURDIR}
 102
 103 # Remove DESTDIR from MAKEFLAGS.  It is present in the environment
 104 # anyhow, and we need to be able to override it for stage installs
 105 .MAKEFLAGS:=    ${.MAKEFLAGS:NDESTDIR=*}
 106
 107 # This section sets the tools used to build the world/kernel
 108 WORLD_CCVER?=           gcc80
 109 WORLD_LDVER?=           ld.gold
 110 WORLD_BINUTILSVER?=     binutils227
 111
 112 # Set the backup parameters if they are not already defined
 113 #
 114 WORLD_BACKUP?=          /var/backups/world_backup
 115 AUTO_BACKUP?=           ${OBJTREE}/world_backup/${DESTDIR}
 116
 117 TARGET_ARCH?=   ${MACHINE_ARCH}
 118 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 119 TARGET?=        ${MACHINE}
 120 .else
 121 TARGET?=        ${TARGET_ARCH}
 122 .endif
 123 .if make(buildworld)
 124 BUILD_ARCH!=    sysctl -n hw.machine_arch
 125
 126 # temporary until everybody has converted to x86_64
 127 .if ${BUILD_ARCH} == "amd64"
 128 BUILD_ARCH=     x86_64
 129 .endif
 130
 131 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 132 .error To cross-build, set TARGET_ARCH.
 133 .endif
 134 .endif
 135
 136 # XXX this is ugly and we need to come up with a nicer solution
 137 .if !defined(TARGET_PLATFORM)
 138 .if ${TARGET_ARCH} == "x86_64"
 139 TARGET_PLATFORM= pc64
 140 .else
 141 .error Unknown target architecture.
 142 .endif
 143 .endif
 144
 145 THREAD_LIB?=    thread_xu
 146
 147 # BTOOLS        (Natively built) All non-cross-development tools that the
 148 #               main build needs.  This includes things like 'mkdir' and 'rm'.
 149 #               We will not use the native system's exec path once we start
 150 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
 151 #
 152 # CTOOLS        (Natively built) Cross development tools which are specific
 153 #               to the target architecture.
 154 #
 155 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
 156 #               CTOOLS.
 157 #
 158 # MACHINE_PLATFORM      Platform Architecture we are building on
 159 # MACHINE               Machine Architecture (usually the same as MACHINE_ARCH)
 160 # MACHINE_ARCH          CPU Architecture we are building on
 161 #
 162 # TARGET_PLATFORM       Platform Architecture we are building for
 163 # TARGET                Machine Architecture we are building for
 164 # TARGET_ARCH           CPU Architecture we are building for
 165 #
 166 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
 167 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
 168 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
 169
 170 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
 171 # cross-tools stages to augment the existing command path to access newer
 172 # versions of certain utilities such as 'patch' that the cross-tools stage
 173 # might expect.
 174 #
 175 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/sbin:${BTOOLSDEST}/bin
 176
 177 # The cross-tools path containing the cross-tools to cross build the
 178 # ultimate world.
 179 #
 180 CTOOLSPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/sbin:${CTOOLSDEST}/bin
 181
 182 # The strict temporary command path contains all binaries required
 183 # by the buildworld system after the cross-tools stage.
 184 #
 185 # NOTE: Append '/usr/local/bin:/usr/pkg/bin' to support external compilers.
 186 #       See compilers.conf(5) man page for more info.
 187 #
 188 STRICTTMPPATH= ${CTOOLSPATH}:${BTOOLSPATH}:/usr/local/bin:/usr/pkg/bin
 189
 190 TMPDIR?=        /tmp
 191 TMPPID!=        echo $$$$
 192
 193 #
 194 # Building a world goes through the following stages
 195 #
 196 # 1. bootstrap-tool stage [BMAKE]
 197 #       This stage is responsible for creating programs that
 198 #       are needed for backward compatibility reasons. They
 199 #       are not built as cross-tools.
 200 # 2. build-tool stage [TMAKE]
 201 #       This stage is responsible for creating the object
 202 #       tree and building any tools that are needed during
 203 #       the build process.
 204 # 3. cross-tool stage [XMAKE]
 205 #       This stage is responsible for creating any tools that
 206 #       are needed for cross-builds. A cross-compiler is one
 207 #       of them.
 208 # 4. world stage [WMAKE]
 209 #       This stage actually builds the world.
 210 # 5. install stage (optional) [IMAKE]
 211 #       This stage installs a previously built world.
 212 #
 213 # In all cases we must carefully adjust the environment so the proper
 214 # tools and header files are used.
 215 #
 216 # NOTE: The M4 environment variable is used by the [f]lex binary to
 217 #       override the location of the 'm4' binary.  The override is
 218 #       needed for certain buildworld version transitions, specifically
 219 #       past a certain point in 3.3 because the older /usr/bin/m4 will
 220 #       generate output that will blow up the newer [f]lex/yacc/bison
 221 #       utilities.
 222 #
 223
 224 # bootstrap-tool stage
 225 #
 226 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 227                 OBJTREE=${OBJTREE} \
 228                 DESTDIR=${BTOOLSDEST} \
 229                 LC_ALL=C \
 230                 PATH=${BTOOLSPATH}:${PATH} \
 231                 M4=${BTOOLSDEST}/usr/bin/m4 \
 232                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 233
 234 BMAKE=          ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
 235                 -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 236                 -DNO_WERROR -DNO_NLS -DSYSBUILD
 237
 238 # build-tool stage
 239 #
 240 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 241                 OBJTREE=${OBJTREE} \
 242                 DESTDIR= \
 243                 LC_ALL=C \
 244                 PATH=${BTOOLSPATH}:${PATH} \
 245                 M4=${BTOOLSDEST}/usr/bin/m4 \
 246                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 247
 248 TMAKE=          ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
 249                 -DNOSHARED -DSYSBUILD
 250
 251 # cross-tool stage
 252 #
 253 # note: TOOLS_PREFIX points to the obj root holding the cross
 254 #       compiler binaries, while USRDATA_PREFIX points to the obj root
 255 #       holding the target environment (and also determines where cross-built
 256 #       libraries, crt*.o, and include files are installed).
 257 #
 258 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
 259                 OBJTREE=${OBJTREE} \
 260                 DESTDIR=${CTOOLSDEST} \
 261                 LC_ALL=C \
 262                 _SHLIBDIRPREFIX=${CTOOLSDEST} \
 263                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 264                 TOOLS_PREFIX=${CTOOLSDEST} \
 265                 USRDATA_PREFIX=${WORLDDEST} \
 266                 SELECT_LINKER=${WORLD_LDVER} \
 267                 M4=${BTOOLSDEST}/usr/bin/m4 \
 268                 PATH=${BTOOLSPATH}:${PATH}
 269
 270 XMAKE=          ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \
 271                 -DBOOTSTRAPPING -DNOMAN -DNOSHARED -DSYSBUILD
 272
 273 # world stage, note the strict path and note that TOOLS_PREFIX is left
 274 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
 275 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
 276 # for both binary and library paths, even though it is being compiled to
 277 # WORLDDEST.  None of the programs in the world stage are ever actually
 278 # executed during the buildworld/installworld.
 279 #
 280 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
 281                 OBJTREE=${OBJTREE} \
 282                 MACHINE_ARCH=${TARGET_ARCH} \
 283                 MACHINE=${TARGET} \
 284                 MACHINE_PLATFORM=${TARGET_PLATFORM} \
 285                 LC_ALL=C \
 286                 OBJFORMAT_PATH=${CTOOLSDEST} \
 287                 HOST_CCVER=${HOST_CCVER} \
 288                 CCVER=${WORLD_CCVER} \
 289                 LDVER=${WORLD_LDVER} \
 290                 BINUTILSVER=${WORLD_BINUTILSVER}
 291
 292 WMAKEENV=       ${CROSSENV} \
 293                 WORLDBUILD=1 \
 294                 DESTDIR=${WORLDDEST} \
 295                 _SHLIBDIRPREFIX=${WORLDDEST} \
 296                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 297                 M4=${BTOOLSDEST}/usr/bin/m4 \
 298                 PATH=${STRICTTMPPATH}
 299
 300 WMAKE=          ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD
 301
 302 # install stage
 303 #
 304 IMAKEENV=       ${CROSSENV} \
 305                 PATH=${STRICTTMPPATH}
 306 IMAKE=          ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD
 307
 308 # kernel stage
 309 #
 310 KMAKEENV=       ${WMAKEENV}
 311
 312 # buildworld
 313 #
 314 # Attempt to rebuild the entire system, with reasonable chance of
 315 # success, regardless of how old your existing system is.
 316 #
 317 _worldtmp: _cleantmp _mtreetmp
 318 .ORDER: _cleantmp _mtreetmp
 319
 320 _cleantmp:
 321 .if !defined(NOCLEAN)
 322         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 323 .else
 324         # XXX - These two can depend on any header file.
 325         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 326         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 327 .endif
 328
 329 _mtreetmp:
 330         @echo
 331         @echo "--------------------------------------------------------------"
 332         @echo ">>> Rebuilding the temporary build tree"
 333         @echo "--------------------------------------------------------------"
 334         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 335 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
 336         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
 337                 -p ${_dir}/  > /dev/null
 338         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
 339                 -p ${_dir}/usr > /dev/null
 340 .endfor
 341         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
 342                 -p ${WORLDDEST}/usr/include > /dev/null
 343         ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
 344
 345 _bwinit:
 346         @echo "--------------------------------------------------------------"
 347         @echo ">>> starting buildworld target"
 348         @echo "--------------------------------------------------------------"
 349 _bootstrap-tools:
 350         @echo
 351         @echo "--------------------------------------------------------------"
 352         @echo ">>> stage 1: bootstrap tools"
 353         @echo "--------------------------------------------------------------"
 354         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 355 _cleanobj:
 356         @echo
 357         @echo "--------------------------------------------------------------"
 358         @echo ">>> stage 2a: cleaning up the object tree"
 359         @echo "--------------------------------------------------------------"
 360         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 361 _obj:
 362         @echo
 363         @echo "--------------------------------------------------------------"
 364         @echo ">>> stage 2b: rebuilding the object tree"
 365         @echo "--------------------------------------------------------------"
 366         cd ${.CURDIR}; ${WMAKE} par-obj
 367 _build-tools:
 368         @echo
 369         @echo "--------------------------------------------------------------"
 370         @echo ">>> stage 2c: build tools"
 371         @echo "--------------------------------------------------------------"
 372         cd ${.CURDIR}; ${TMAKE} build-tools
 373 _cross-tools:
 374         @echo
 375         @echo "--------------------------------------------------------------"
 376         @echo ">>> stage 3: cross tools"
 377         @echo "--------------------------------------------------------------"
 378         cd ${.CURDIR}; ${XMAKE} cross-tools
 379 _includes:
 380         @echo
 381         @echo "--------------------------------------------------------------"
 382         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
 383         @echo "--------------------------------------------------------------"
 384         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 385 _libraries:
 386         @echo
 387         @echo "--------------------------------------------------------------"
 388         @echo ">>> stage 4b: building libraries"
 389         @echo "--------------------------------------------------------------"
 390         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOMAN -DNOFSCHG libraries
 391 _depend:
 392         @echo
 393         @echo "--------------------------------------------------------------"
 394         @echo ">>> stage 4c: make dependencies"
 395         @echo "--------------------------------------------------------------"
 396         cd ${.CURDIR}; ${WMAKE} par-depend
 397 everything:
 398         @echo
 399         @echo "--------------------------------------------------------------"
 400         @echo ">>> stage 4d: building everything"
 401         @echo "--------------------------------------------------------------"
 402         cd ${.CURDIR}; ${WMAKE} all
 403 _initrd:
 404         @echo
 405         @echo "--------------------------------------------------------------"
 406         @echo ">>> stage 5: building rescue and initrd"
 407         @echo "--------------------------------------------------------------"
 408         cd ${.CURDIR}/initrd; ${WMAKEENV} make all
 409 _bwdone:
 410         @echo "--------------------------------------------------------------"
 411         @echo ">>> buildworld target complete"
 412         @echo "--------------------------------------------------------------"
 413 _qwinit:
 414         @echo "--------------------------------------------------------------"
 415         @echo ">>> starting quickworld target"
 416         @echo "--------------------------------------------------------------"
 417 _qwdone:
 418         @echo "--------------------------------------------------------------"
 419         @echo ">>> quickworld target complete"
 420         @echo "--------------------------------------------------------------"
 421 _iwinit:
 422         @echo "--------------------------------------------------------------"
 423         @echo ">>> starting installworld target"
 424         @echo "--------------------------------------------------------------"
 425
 426 # note: buildworld no longer depends on _cleanobj because we rm -rf the
 427 # entire object tree and built the bootstrap tools in a different location.
 428 #
 429 # buildworld    - build everything from scratch
 430 # quickworld    - skip the bootstrap, build, and cross-build steps
 431 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
 432 #
 433 # note: we include _obj in realquickworld to prevent accidental creation
 434 # of files in /usr/src.
 435
 436 WMAKE_TGTS=
 437 .if !defined(SUBDIR_OVERRIDE)
 438 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 439 .endif
 440 WMAKE_TGTS+=    _obj _build-tools
 441 .if !defined(SUBDIR_OVERRIDE)
 442 WMAKE_TGTS+=    _cross-tools
 443 .endif
 444 WMAKE_TGTS+=    _includes _libraries _depend everything _initrd
 445
 446 .if defined(WMAKE_TGTS_OVERRIDE)
 447 SUBDIR=
 448 WMAKE_TGTS=     ${WMAKE_TGTS_OVERRIDE}
 449 .endif
 450
 451 QMAKE_TGTS=     _mtreetmp _obj _includes _libraries _depend everything _initrd
 452
 453 buildworld: _bwinit ${WMAKE_TGTS} _bwdone
 454
 455 quickworld: _qwinit ${QMAKE_TGTS} _qwdone
 456
 457 realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone
 458
 459 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
 460
 461 GENLOGDIR=      /usr/obj/${.CURDIR}
 462 .ORDER: build-all install-all
 463
 464 # build-all
 465 #
 466 # build
 467 build-all:
 468         @echo "Building world, log file in ${GENLOGDIR}/bw.out"
 469         @mkdir -p ${GENLOGDIR}
 470         @(cd ${.CURDIR}; ${MAKE} -j `sysctl -n hw.ncpu` buildworld > ${GENLOGDIR}/bw.out 2>&1)
 471         @sync
 472         @echo "Building kernel, log file in ${GENLOGDIR}/bk.out"
 473         @(cd ${.CURDIR}; ${MAKE} -j `sysctl -n hw.ncpu` buildkernel > ${GENLOGDIR}/bk.out 2>&1)
 474         @echo "build-all completed ok"
 475         @sync
 476
 477 install-all:
 478         @echo "Installing kernel, log file in ${GENLOGDIR}/bk.out"
 479         @mkdir -p ${GENLOGDIR}
 480         @(cd ${.CURDIR}; ${MAKE} -j 1 installkernel >> ${GENLOGDIR}/bk.out 2>&1)
 481         @sync
 482         @echo "Installing world, log file in ${GENLOGDIR}/bw.out"
 483         @(cd ${.CURDIR}; ${MAKE} -j 1 installworld >> ${GENLOGDIR}/bw.out 2>&1)
 484         @sync
 485         echo "Upgrading world"
 486         @(cd ${.CURDIR}; ${MAKE} -j 1 upgrade >> ${GENLOGDIR}/bw.out 2>&1)
 487         @sync
 488         @echo "install-all completed ok.  reboot recommended and after that, "
 489         @echo "if doing a major upgrade, pkg upgrade -f"
 490
 491 .ORDER: _bwinit ${WMAKE_TGTS} _bwdone
 492 .ORDER: _obj _includes
 493 .ORDER: _qwinit _mtreetmp _obj
 494 .ORDER: installcheck backupworld-auto
 495 .ORDER: everything _qwdone
 496
 497
 498 # installcheck
 499 #
 500 # Checks to be sure system is ready for installworld
 501 #
 502 installcheck: _iwinit
 503 .for _user in _pflogd
 504         @pw usershow ${_user} >/dev/null || { \
 505             echo "You need to run 'make preupgrade' first."; \
 506             /usr/bin/false; \
 507         }
 508 .endfor
 509 .for _group in _pflogd authpf
 510         @pw groupshow ${_group} >/dev/null || { \
 511             echo "You need to run 'make preupgrade' first."; \
 512             /usr/bin/false; \
 513         }
 514 .endfor
 515 .if !defined(OVERRIDE_CHECKS)
 516 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
 517         @case `uname -r` in \
 518             1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) \
 519                 echo "You must upgrade your kernel to at least 1.5.4" \
 520                      "and reboot before you can safely installworld," \
 521                      "due to libc/system call ABI changes."; \
 522                 /usr/bin/false; \
 523         esac
 524         @case `uname -r` in \
 525             1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) \
 526                 echo "The system is too old for a normal installworld," \
 527                      "you need to use 'installworld-force'."; \
 528                 /usr/bin/false; \
 529         esac
 530 .endif
 531 .endif
 532
 533 # installworld
 534 #
 535 # Backs up the current world if ${AUTO_BACKUP} is writable.
 536 # Installs everything compiled by a 'buildworld'.
 537 #
 538 installworld: installcheck
 539         -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
 540         @cd ${.CURDIR}; \
 541             (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
 542              ${IMAKE} backupworld-auto) || \
 543             echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
 544
 545         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 546         ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc \
 547             ${DESTDIR}/etc/upgrade/
 548         cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL os-release
 549         cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL initrd
 550         sync
 551         @echo "--------------------------------------------------------------"
 552         @echo ">>> installworld target complete"
 553         @echo "--------------------------------------------------------------"
 554
 555 os-release:
 556         @echo "NAME=DragonFly" > ${DESTDIR}/etc/os-release
 557         @echo "VERSION=${OSREL}-SYNTH" >> ${DESTDIR}/etc/os-release
 558         @echo "VERSION_ID=${OSREL}" >> ${DESTDIR}/etc/os-release
 559         @echo "ID=dragonfly" >> ${DESTDIR}/etc/os-release
 560         @echo "ANSI_COLOR=\"0;32\"" >> ${DESTDIR}/etc/os-release
 561         @echo "PRETTY_NAME=\"DragonFlyBSD ${OSREL}-SYNTH\"" >> ${DESTDIR}/etc/os-release
 562         @echo "CPE_NAME=\"cpe:/o:dragonflybsd:dragonfly:${OSREL}\"" >> ${DESTDIR}/etc/os-release
 563         @echo "SUPPORT_URL=\"http://chat.efnet.org:9090/?nick=dflynick&channels=%23dragonflybsd&Login=Login\"" >> ${DESTDIR}/etc/os-release
 564         @echo "HOME_URL=\"https://www.dragonflybsd.org/\"" >> ${DESTDIR}/etc/os-release
 565         @echo "BUG_REPORT_URL=\"https://bugs.dragonflybsd.org/\"" >> ${DESTDIR}/etc/os-release
 566         @echo "MACHINE_ARCH=${MACHINE_ARCH}" >> ${DESTDIR}/etc/os-release
 567         @echo "MACHINE=${MACHINE}" >> ${DESTDIR}/etc/os-release
 568         @echo "DFLYVERSION=${DFLYVERSION}" >> ${DESTDIR}/etc/os-release
 569
 570 installworld-force:
 571         @echo "Doing a forced installworld.  This will install to a temporary directory,"
 572         @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/"
 573         @echo "and finally will issue a normal installworld."
 574         @echo
 575         @echo "Starting in 5 seconds.  ^C to abort."
 576         @echo
 577         sleep 1
 578         rm -rf /usr/obj/temp > /dev/null 2>&1 || chflags -R noschg /usr/obj/temp
 579         rm -rf /usr/obj/temp
 580         mkdir -p /usr/obj/temp/cpdup/bin
 581         (cd ${.CURDIR}/bin/cpdup; \
 582                 make clean && \
 583                 make obj && \
 584                 make clean && \
 585                 make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE)
 586         @echo "XXXXXXXXX Installing to temporary XXXXXXXXX"
 587         @sleep 1
 588         (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1)
 589         @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX"
 590         @sleep 1
 591         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin
 592         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin
 593         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib
 594         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin
 595         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin
 596         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib
 597         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec
 598         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec
 599         @echo "XXXXXXXXX Doing final installworld XXXXXXXX"
 600         sleep 5
 601         (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE)
 602         (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE)
 603         (cd ${.CURDIR}; ${MAKE} initrd)
 604
 605 # reinstall
 606 #
 607 # If you have a build server, you can NFS mount the source and obj directories
 608 # and do a 'make reinstall' on the *client* to install new binaries from the
 609 # most recent server build.
 610 #
 611 reinstall:
 612         @echo "--------------------------------------------------------------"
 613         @echo ">>> Making hierarchy"
 614         @echo "--------------------------------------------------------------"
 615         cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
 616         @echo
 617         @echo "--------------------------------------------------------------"
 618         @echo ">>> Installing everything"
 619         @echo "--------------------------------------------------------------"
 620         cd ${.CURDIR}; make -f Makefile.inc1 install
 621
 622 # initrd
 623 #
 624 # Install the rescue tools and the initrd image built by 'buildworld'.
 625 #
 626 initrd: .PHONY
 627         (cd ${.CURDIR}/initrd; ${IMAKEENV} make install)
 628
 629
 630 # buildkernel, nativekernel, quickkernel, realquickkernel, and installkernel
 631 #
 632 # Which kernels to build and/or install is specified by setting
 633 # KERNCONF. If not defined an X86_64_GENERIC kernel is built/installed.
 634 # Only the existing (depending TARGET) config files are used
 635 # for building kernels and only the first of these is designated
 636 # as the one being installed.
 637 #
 638 # You can specify INSTALLSTRIPPED=1 if you wish the installed
 639 # kernel and modules to be stripped of its debug info (required
 640 # symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
 641 # if you only want to strip the modules of their debug info.  These
 642 # only apply if you have DEBUG=-g in your kernel config or make line.
 643 #
 644 # Note that we have to use TARGET instead of TARGET_ARCH when
 645 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 646 # be set to cross-build, we have to make sure TARGET is set
 647 # properly.
 648
 649 .if !defined(KERNCONF) && defined(KERNEL)
 650 KERNCONF=       ${KERNEL}
 651 KERNWARN=       yes
 652 .else
 653 # XXX makeshift fix to build the right kernel for the (target) architecture
 654 # We should configure this in the platform files somehow
 655 .if ${TARGET_ARCH} == "x86_64"
 656 KERNCONF?=      X86_64_GENERIC
 657 .endif
 658 .endif
 659 INSTKERNNAME?=  kernel
 660
 661 KRNLSRCDIR=     ${.CURDIR}/sys
 662 KRNLCONFDIR=    ${KRNLSRCDIR}/config
 663 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 664 KERNCONFDIR?=   ${KRNLCONFDIR}
 665
 666 BUILDKERNELS=
 667 INSTALLKERNEL=
 668 .for _kernel in ${KERNCONF}
 669 .if exists(${KERNCONFDIR}/${_kernel})
 670 BUILDKERNELS+=  ${_kernel}
 671 .if empty(INSTALLKERNEL)
 672 INSTALLKERNEL= ${_kernel}
 673 .endif
 674 .endif
 675 .endfor
 676
 677 # kernel version numbers survive rm -rf
 678 #
 679 .for _kernel in ${BUILDKERNELS}
 680 .if exists(${KRNLOBJDIR}/${_kernel}/version)
 681 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
 682 .endif
 683 .endfor
 684
 685 # buildkernel
 686 #
 687 # Builds all kernels defined by BUILDKERNELS.
 688 #
 689 bk_tools:
 690         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 691             echo "You must buildworld before buildkernel.  If you wish"; \
 692             echo "to build a kernel using native tools, config it manually"; \
 693             echo "or use the nativekernel target if you are in a rush"; \
 694             /usr/bin/false; \
 695         fi
 696
 697 maybe_bk_tools:
 698 .for _kernel in ${BUILDKERNELS}
 699         @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 700             if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 701                 echo "The kernel was build using buildworld tools which no" ; \
 702                 echo "longer appear to exist, (real)quickkernel failed!" ; \
 703                 /usr/bin/false; \
 704             fi; \
 705         fi
 706 .endfor
 707
 708 bk_build_list:
 709 .if empty(BUILDKERNELS)
 710         @echo ">>> ERROR: Missing kernel configuration file(s)."
 711         @echo ">>> ${KERNCONF} not found in ${KERNCONFDIR}."
 712         @false
 713 .endif
 714
 715 bk_kernwarn:
 716 .if defined(KERNWARN)
 717         @echo "--------------------------------------------------------------"
 718         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 719         @echo "--------------------------------------------------------------"
 720         @sleep 3
 721 .endif
 722         @echo
 723
 724 # The buildkernel target rebuilds the specified kernels from scratch
 725 # using the crossbuild tools generated by the last buildworld.  It is
 726 # the safest (but also the most time consuming) way to build a new kernel.
 727 #
 728 buildkernel:    bk_tools bk_build_list bk_kernwarn
 729 .for _kernel in ${BUILDKERNELS}
 730         @echo "--------------------------------------------------------------"
 731         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 732         @echo "--------------------------------------------------------------"
 733         @echo "===> ${_kernel}"
 734 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 735         rm -rf ${KRNLOBJDIR}/${_kernel}
 736 .else
 737         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 738                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
 739                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 740 .endif
 741         mkdir -p ${KRNLOBJDIR}
 742 .if !defined(NO_KERNELCONFIG)
 743         cd ${KRNLCONFDIR}; \
 744                 PATH=${STRICTTMPPATH} \
 745                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 746                         ${KERNCONFDIR}/${_kernel}
 747 .endif
 748 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 749         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 750 .endif
 751         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
 752 .if !defined(NO_KERNELDEPEND)
 753         cd ${KRNLOBJDIR}/${_kernel}; \
 754             ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
 755 .endif
 756         cd ${KRNLOBJDIR}/${_kernel}; \
 757             ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
 758         @echo "--------------------------------------------------------------"
 759         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 760         @echo "--------------------------------------------------------------"
 761 .endfor
 762
 763 # The nativekernel target rebuilds the specified kernels from scratch
 764 # using the system's standard compiler rather than using the crossbuild
 765 # tools generated by the last buildworld.  This is fairly safe if your
 766 # system is reasonable up-to-date.
 767 #
 768 nativekernel:   bk_build_list bk_kernwarn
 769 .for _kernel in ${BUILDKERNELS}
 770         @echo "--------------------------------------------------------------"
 771         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 772         @echo "--------------------------------------------------------------"
 773         @echo "===> ${_kernel}"
 774 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 775         rm -rf ${KRNLOBJDIR}/${_kernel}
 776 .else
 777         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
 778                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
 779                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 780 .endif
 781         mkdir -p ${KRNLOBJDIR}
 782 .if !defined(NO_KERNELCONFIG)
 783         cd ${KRNLCONFDIR}; \
 784                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 785                         ${KERNCONFDIR}/${_kernel}
 786 .endif
 787 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 788         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 789 .endif
 790         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
 791 .if !defined(NO_KERNELDEPEND)
 792         cd ${KRNLOBJDIR}/${_kernel}; \
 793             make KERNEL=${INSTKERNNAME} depend
 794 .endif
 795         cd ${KRNLOBJDIR}/${_kernel}; \
 796             make KERNEL=${INSTKERNNAME} all
 797         @echo "--------------------------------------------------------------"
 798         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 799         @echo "--------------------------------------------------------------"
 800 .endfor
 801
 802 # The (real)quickkernel target rebuilds the specified kernels as quickly
 803 # as possible.  It will use the native tools or the buildworld cross tools
 804 # based on whether the kernel was originally generated via buildkernel or
 805 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt.
 806 # realquickkernel skips the depend step (analogous to realquickworld).
 807 #
 808 quickkernel realquickkernel:    maybe_bk_tools bk_build_list bk_kernwarn
 809 .for _kernel in ${BUILDKERNELS}
 810         @echo "--------------------------------------------------------------"
 811         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 812         @echo "--------------------------------------------------------------"
 813         @echo "===> ${_kernel}"
 814 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 815 .if !defined(NO_KERNELCONFIG)
 816         cd ${KRNLCONFDIR}; \
 817                 PATH=${STRICTTMPPATH} \
 818                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 819                         ${KERNCONFDIR}/${_kernel}
 820 .endif
 821 .if !defined(NO_KERNELDEPEND) && !make(realquickkernel)
 822         cd ${KRNLOBJDIR}/${_kernel}; \
 823             ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
 824 .endif
 825         cd ${KRNLOBJDIR}/${_kernel}; \
 826             ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
 827 .else
 828 .if !defined(NO_KERNELCONFIG)
 829         cd ${KRNLCONFDIR}; \
 830             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 831                 ${KERNCONFDIR}/${_kernel}
 832 .endif
 833 .if !defined(NO_KERNELDEPEND) && !make(realquickkernel)
 834         cd ${KRNLOBJDIR}/${_kernel}; \
 835             make KERNEL=${INSTKERNNAME} depend
 836 .endif
 837         cd ${KRNLOBJDIR}/${_kernel}; \
 838             make KERNEL=${INSTKERNNAME} all
 839 .endif
 840         @echo "--------------------------------------------------------------"
 841         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 842         @echo "--------------------------------------------------------------"
 843 .endfor
 844
 845
 846 # installkernel
 847 #
 848 # Install the kernel defined by INSTALLKERNEL
 849 #
 850 installkernel reinstallkernel:
 851         @echo "--------------------------------------------------------------"
 852         @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
 853         @echo "--------------------------------------------------------------"
 854 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
 855         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 856             ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 857 .else
 858         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 859             make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 860 .endif
 861         @echo "--------------------------------------------------------------"
 862         @echo ">>> Kernel install for ${INSTALLKERNEL} completed on `LC_ALL=C date`"
 863         @echo "--------------------------------------------------------------"
 864
 865
 866 # ------------------------------------------------------------------------
 867 #
 868 # From here onwards are utility targets used by the 'make world' and
 869 # related targets.  If your 'world' breaks, you may like to try to fix
 870 # the problem and manually run the following targets to attempt to
 871 # complete the build.  Beware, this is *not* guaranteed to work, you
 872 # need to have a pretty good grip on the current state of the system
 873 # to attempt to manually finish it.  If in doubt, 'make world' again.
 874 #
 875
 876 # bootstrap-tools: Build all tools required to build all tools.  Note that
 877 # order is important in a number of cases and also note that the bootstrap
 878 # and build tools stages have access to earlier binaries they themselves
 879 # had generated.
 880 #
 881 # patch:        older patch's do not have -i.  This program must be built
 882 #               first so other bootstrap tools that need to apply patches
 883 #               can use it.
 884 # [x]install:   dependancies on various new install features
 885 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 886 #               envs are not compatible with older objformat binaries.
 887 #
 888
 889 # BSTRAPDIRS1 - must be built in strict order, no parallelism
 890 #
 891 # order is very important. yacc before m4 before flex.  flex exec's m4,
 892 # m4's parser file needs the latest byacc (insanity!).
 893 #
 894 BSTRAPDIRS1= \
 895         usr.bin/patch \
 896         bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
 897         bin/test bin/cat bin/ln bin/mv bin/expr bin/sh \
 898         bin/hostname bin/kill \
 899         usr.bin/yacc usr.bin/m4 usr.bin/localedef \
 900         usr.bin/uudecode usr.bin/xinstall \
 901         usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
 902         usr.bin/find usr.bin/flex
 903
 904 # BSTRAPDIRS2 - may built in parallel
 905 #
 906 BSTRAPDIRS2= \
 907         usr.bin/sed usr.bin/uname usr.bin/touch \
 908         usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
 909         usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
 910         usr.bin/gencat usr.bin/chflags \
 911         usr.bin/uuencode usr.bin/cap_mkdb usr.bin/true usr.bin/false \
 912         usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
 913         usr.bin/tail usr.bin/unifdef \
 914         usr.sbin/chown usr.sbin/mtree usr.sbin/config \
 915         usr.sbin/zic usr.sbin/pwd_mkdb \
 916         gnu/usr.bin/grep usr.bin/sort usr.bin/gzip \
 917         usr.bin/mkcsmapper usr.bin/mkesdb usr.bin/crunch
 918
 919 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
 920         touch ${BTOOLSDEST}/.bootstrap_done
 921
 922 bootstrap-tools-before:
 923         ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
 924
 925 bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
 926
 927 bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
 928
 929 .ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
 930
 931 .ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
 932
 933 .for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
 934 bstrap-${_tool}!
 935         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
 936                 cd ${.CURDIR}/${_tool}; \
 937                 make DIRPRFX=${_tool}/ obj && \
 938                 make DIRPRFX=${_tool}/ depend && \
 939                 make DIRPRFX=${_tool}/ all && \
 940                 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 941 .endfor
 942
 943 # build-tools: Build special purpose build tools.
 944 #
 945 # XXX we may be able to remove or consolidate this into bootstrap-tools
 946 # now that we have the native helper (.nx/.no) infrastructure.
 947 #
 948 # XXX we should separate this into new Makefile.inc2.
 949 # Just to prepare for reduction of ORDER: that slows down parallel crossworld.
 950
 951 # Make sure Makefile.inc1 logic is intact.
 952 .if !defined(WORLD_ALTCOMPILER)
 953 .warning undefined WORLD_ALTCOMPILER
 954 .endif
 955
 956 # gcc80 is now the default compiler.  See sys.mk for WORLD_ALTCOMPILER default
 957 # and this file for WORLD_CCVER.
 958 #
 959 _gcc47_cross= gnu/usr.bin/cc47
 960 _gcc80_cross= gnu/usr.bin/cc80
 961 _gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc
 962
 963 .if !defined(NO_ALTCOMPILER)
 964 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
 965 _altcompiler_cross+= ${_gcc47_cross}
 966 . endif
 967 .endif
 968
 969 _basecompiler_cross= ${_gcc80_cross}
 970
 971 _custom_cross= libexec/customcc
 972 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
 973
 974 build-tools: build-tools-targets
 975         touch ${BTOOLSDEST}/.build_done
 976
 977 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
 978
 979 #
 980 # cross-tools: Build cross-building tools
 981 #
 982
 983 CTOOLSDIRS= usr.bin/objformat
 984
 985 CTOOLSDIRS+=    ${_binutils} \
 986                 ${_gcc_common_cross} \
 987                 ${_altcompiler_cross} \
 988                 ${_basecompiler_cross} ${_custom_cross}
 989
 990 cross-tools: cross-tools-targets
 991         touch ${CTOOLSDEST}/.cross_done
 992
 993 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
 994
 995 .for _tool in ${CTOOLSDIRS}
 996 ctools-${_tool}!
 997         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
 998                 cd ${.CURDIR}/${_tool}; \
 999                 make DIRPRFX=${_tool}/ obj && \
1000                 make DIRPRFX=${_tool}/ depend && \
1001                 make DIRPRFX=${_tool}/ all && \
1002                 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
1003 .endfor
1004
1005 #
1006 # hierarchy - ensure that all the needed directories are present
1007 #
1008 hierarchy:
1009         cd ${.CURDIR}/etc;              make distrib-dirs
1010
1011 #
1012 # libraries - build all libraries, and install them under ${DESTDIR}.
1013 #
1014 # The list of libraries with dependents (${_prebuild_libs}) and their
1015 # interdependencies (__L) are built automatically by the
1016 # ${.CURDIR}/tools/make_libdeps.sh script.
1017 #
1018 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
1019 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
1020 #
1021 libraries:
1022         cd ${.CURDIR}; \
1023             HOST_CCVER=${HOST_CCVER} CCVER=gcc80 \
1024                 make -f Makefile.inc1 _startup_libs80 -DSYSBUILD -DLIBGCC_ONLY;
1025 .if !defined(NO_ALTCOMPILER)
1026 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
1027         cd ${.CURDIR}; \
1028             HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
1029                 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD -DLIBGCC_ONLY;
1030 . endif
1031 .endif
1032         cd ${.CURDIR}; \
1033             make -f Makefile.inc1 _startup_libs -DSYSBUILD && \
1034             make -f Makefile.inc1 _prebuild_libs -DSYSBUILD && \
1035             make -f Makefile.inc1 _generic_libs -DSYSBUILD && \
1036             touch ${WORLDDEST}/.libraries_done
1037
1038 # These dependencies are not automatically generated:
1039 #
1040 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
1041 # shared libraries for ELF.  The target for _startup_libsXX is
1042 # specifically built using gccXX.
1043 #
1044 _startup_libs47=        gnu/usr.bin/cc47/cc_prep \
1045                         gnu/usr.bin/cc47/cc_tools \
1046                         gnu/lib/gcc47/csu \
1047                         gnu/lib/gcc47/libgcc \
1048                         gnu/lib/gcc47/libgcc_eh \
1049                         gnu/lib/gcc47/libgcc_pic
1050
1051 _startup_libs80=        gnu/usr.bin/cc80/cc_prep \
1052                         gnu/usr.bin/cc80/cc_tools \
1053                         gnu/lib/gcc80/csu \
1054                         gnu/lib/gcc80/libgcc \
1055                         gnu/lib/gcc80/libgcc_eh \
1056                         gnu/lib/gcc80/libgcc_pic
1057
1058 .if !defined(NO_ALTCOMPILER)
1059 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
1060 _startup_libs_alt+=     _startup_libs47
1061 . endif
1062 .endif
1063
1064 _startup_libs_base=     _startup_libs80
1065
1066 _startup_libs=          lib/csu lib/libc lib/libc_rtld
1067 lib/libc__L: lib/csu__L
1068
1069 _prebuild_libs=         lib/libbz2 lib/liblzma lib/libz
1070 _prebuild_libs+=        lib/libutil
1071
1072 _prebuild_libs+=        lib/libelf
1073 _prebuild_libs+=        lib/libpcap
1074
1075 _generic_libs=  gnu/lib
1076
1077 _prebuild_libs+= lib/libcrypt lib/libncurses/libncurses
1078
1079 _generic_libs+= lib
1080
1081 _prebuild_libs+=        lib/librecrypto lib/libressl
1082 lib/libressl__L: lib/librecrypto__L
1083
1084 _prebuild_libs+= lib/libsbuf lib/libm \
1085                 lib/libpam/libpam lib/libypclnt lib/lib${THREAD_LIB} \
1086                 lib/libpthread lib/libprop
1087
1088 _generic_libs+= usr.bin/flex/lib
1089
1090 .for _alib in ${_startup_libs_alt} ${_startup_libs_base}
1091 __startup_alibs+= ${${_alib}}
1092 .endfor
1093
1094 .for _lib in ${__startup_alibs} \
1095                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
1096 ${_lib}__L: .PHONY
1097 .if exists(${.CURDIR}/${_lib})
1098         @${ECHODIR} "===> ${_lib}"; \
1099                 cd ${.CURDIR}/${_lib}; \
1100                 echo "STEP DEP ${_lib}" && \
1101                 make DIRPRFX=${_lib}/ depend && \
1102                 echo "STEP ALL ${_lib}" && \
1103                 make DIRPRFX=${_lib}/ all && \
1104                 echo "STEP INSTALL ${_lib}" && \
1105                 make DIRPRFX=${_lib}/ install && \
1106                 echo "STEP DONE ${_lib}";
1107 .else
1108 .warning missing ${.CURDIR}/${_lib} directory.
1109 .endif
1110 .endfor
1111
1112 _startup_libs: ${_startup_libs:S/$/__L/}
1113 .for _alib in ${_startup_libs_alt} ${_startup_libs_base}
1114 ${_alib}: ${${_alib}:C/$/__L/}
1115 .endfor
1116 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
1117 _generic_libs: ${_generic_libs:S/$/__L/}
1118
1119 # library targets must be ordered because there are inter-library
1120 # races (e.g. generation of tconfig.h)
1121 #
1122 .for _alib in ${_startup_libs_base} ${_startup_libs_alt}
1123 .ORDER: ${${_alib}:C/$/__L/}
1124 .endfor
1125
1126 # uncomment if there are missing dependencies
1127 .if 0
1128 .ORDER: ${_prebuild_libs:S/$/__L/}
1129 # we can disable this one, no lib/* depend on libstdc++
1130 .ORDER: ${_generic_libs:S/$/__L/}
1131 .endif
1132
1133 .for __target in clean cleandepend cleandir obj depend includes
1134 .for entry in ${SUBDIR}
1135 ${entry}.${__target}__D: .PHONY
1136         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1137                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1138                 edir=${entry}.${MACHINE_ARCH}; \
1139                 cd ${.CURDIR}/$${edir}; \
1140         else \
1141                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1142                 edir=${entry}; \
1143                 cd ${.CURDIR}/$${edir}; \
1144         fi; \
1145         make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1146 .endfor
1147 par-${__target}: ${SUBDIR:C/$/.${__target}__D/}
1148 .ORDER: ${SUBDIR:C/$/.${__target}__D/}
1149 .endfor
1150 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1151
1152 # The wmake target is used by /usr/bin/wmake to run make in a
1153 # world build environment.
1154 #
1155 wmake:
1156         @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD'
1157
1158 wmakeenv:
1159         @echo '${WMAKEENV} /bin/sh'
1160
1161 bmake:
1162         @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD'
1163
1164 bmakeenv:
1165         @echo '${BMAKEENV} /bin/sh'
1166
1167 tmake:
1168         @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD'
1169
1170 tmakeenv:
1171         @echo '${TMAKEENV} /bin/sh'
1172
1173 xmake:
1174         @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD'
1175
1176 xmakeenv:
1177         @echo '${XMAKEENV} /bin/sh'
1178
1179 backupworld: backup-clean
1180         @mkdir -p ${WORLD_BACKUP}
1181 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1182      exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1183      exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1184         tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1185                 --options gzip:compression-level=1 \
1186                 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1187 .endif
1188
1189 backupworld-auto:
1190 .if !defined(NO_BACKUP)
1191         rm -f ${AUTO_BACKUP}/binaries.tar.gz
1192         @mkdir -p ${AUTO_BACKUP}
1193 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1194      exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1195      exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1196         /usr/bin/tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1197                 --options gzip:compression-level=1 \
1198                 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1199 .endif
1200 .endif
1201
1202 backup-auto-clean:
1203         rm -f ${AUTO_BACKUP}/binaries.tar.gz
1204
1205 backup-clean:
1206         rm -f ${WORLD_BACKUP}/binaries.tar.gz
1207
1208 restoreworld:
1209 .if !exists(${WORLD_BACKUP}/binaries.tar.gz)
1210         @echo "There does not seem to be a valid archive present."
1211 .else
1212         @echo "Restoring system binaries from manual backup archive..."
1213         @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1214                 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1215                 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1216         tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1217 .endif
1218
1219 restoreworld-auto:
1220 .if !exists(${AUTO_BACKUP}/binaries.tar.gz)
1221         @echo "There does not seem to be a valid archive present."
1222 .else
1223         @echo "Restoring system binaries from auto-backup archive..."
1224         @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1225                 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1226                 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1227         tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1228 .endif
1229
1230 # Take advantage of bmake error response
1231 #
1232 MAKE_PRINT_VAR_ON_ERROR= \
1233         .CURDIR \
1234         .OBJDIR \
1235         .TARGETS \
1236         .ERROR_TARGET \
1237         .MAKE.LEVEL \
1238         .MAKE.MODE \
1239         PATH \
1240         LD_LIBRARY_PATH \
1241         MACHINE_ARCH \
1242         MACHINE \
1243         MAKEFILE \
1244         MAKESYSPATH \
1245         MAKEOBJDIRPREFIX \
1246         WORLD_ALTCOMPILER \
1247         DESTDIR \
1248         SHELL .SHELL
1249 .if ${.MAKE.LEVEL} > 0
1250 MAKE_PRINT_VAR_ON_ERROR+= .MAKE.MAKEFILES .PATH
1251 .endif
1252
1253 .include <bsd.subdir.mk>