Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 # $DragonFly: src/Makefile.inc1,v 1.38 2004/08/18 16:37:15 dillon Exp $
   4 #
   5 # Make command line options:
   6 #       -DMAKE_KERBEROS5 to build Kerberos5
   7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   8 #       -DNOCLEAN do not clean at all
   9 #       -DNOCRYPT will prevent building of crypt versions
  10 #       -DNOMAN do not build the manual pages
  11 #       -DNOPROFILE do not build profiled libraries
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24 #
  25 # The intended user-driven targets are:
  26 #
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # quickworld  - skip the glue and do a depend+build on the meat
  29 # realquickworld - skip the glue and depend stages and just build the meat
  30 # crossworld  - only build the glue (particularly the cross-build environment)
  31 # installworld- install everything built by "buildworld"
  32 # update      - convenient way to update your source tree (eg: sup/cvs)
  33 # most        - build user commands, no libraries or include files
  34 # installmost - install user commands, no libraries or include files
  35 #
  36 # Standard targets (not defined here) are documented in the makefiles in
  37 # /usr/share/mk.  These include:
  38 #               obj depend all install clean cleandepend cleanobj
  39
  40 # Put initial settings here.
  41 SUBDIR=
  42
  43 # We must do share/info early so that installation of info `dir'
  44 # entries works correctly.  Do it first since it is less likely to
  45 # grow dependencies on include and lib than vice versa.
  46 .if exists(${.CURDIR}/share/info)
  47 SUBDIR+= share/info
  48 .endif
  49
  50 # We must do include and lib early so that the perl *.ph generation
  51 # works correctly as it uses the header files installed by this.
  52 .if exists(${.CURDIR}/include)
  53 SUBDIR+= include
  54 .endif
  55 .if exists(${.CURDIR}/lib)
  56 SUBDIR+= lib
  57 .endif
  58 # This exists simply to ensure that the obj dir hierarchy is
  59 # intact for nrelease, allowing the nrelease Makefile's to
  60 # reference ${.OBJDIR}.
  61 #
  62 .if exists(${.CURDIR}/nrelease)
  63 SUBDIR+= nrelease
  64 .endif
  65
  66 .if exists(${.CURDIR}/bin)
  67 SUBDIR+= bin
  68 .endif
  69 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  70 SUBDIR+= games
  71 .endif
  72 .if exists(${.CURDIR}/gnu)
  73 SUBDIR+= gnu
  74 .endif
  75 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  76     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
  77 SUBDIR+= kerberos5
  78 .endif
  79 .if exists(${.CURDIR}/libexec)
  80 SUBDIR+= libexec
  81 .endif
  82 .if exists(${.CURDIR}/sbin)
  83 SUBDIR+= sbin
  84 .endif
  85 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
  86 SUBDIR+= secure
  87 .endif
  88 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  89 SUBDIR+= share
  90 .endif
  91 .if exists(${.CURDIR}/sys)
  92 SUBDIR+= sys
  93 .endif
  94 .if exists(${.CURDIR}/usr.bin)
  95 SUBDIR+= usr.bin
  96 .endif
  97 .if exists(${.CURDIR}/usr.sbin)
  98 SUBDIR+= usr.sbin
  99 .endif
 100
 101 # etc must be last for "distribute" to work
 102 .if exists(${.CURDIR}/etc)
 103 SUBDIR+= etc
 104 .endif
 105
 106 # These are last, since it is nice to at least get the base system
 107 # rebuilt before you do them.
 108 .if defined(LOCAL_DIRS)
 109 .for _DIR in ${LOCAL_DIRS}
 110 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
 111 SUBDIR+= ${_DIR}
 112 .endif
 113 .endfor
 114 .endif
 115
 116 .if defined(SUBDIR_OVERRIDE)
 117 SUBDIR=         ${SUBDIR_OVERRIDE}
 118 .endif
 119
 120 .if defined(NOCLEANDIR)
 121 CLEANDIR=       clean cleandepend
 122 .else
 123 CLEANDIR=       cleandir
 124 .endif
 125
 126 SUP?=           /usr/local/bin/cvsup
 127 SUPFLAGS?=      -g -L 2 -P -
 128 .if defined(SUPHOST)
 129 SUPFLAGS+=      -h ${SUPHOST}
 130 .endif
 131
 132 # Object directory base in primary make.  Note that when we rerun make
 133 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
 134 # subdirectory because the rest of the build system needs it that way.
 135 # The original object directory base is saved in OBJTREE.
 136 #
 137 MAKEOBJDIRPREFIX?=      /usr/obj
 138 OBJTREE?=               ${MAKEOBJDIRPREFIX}
 139
 140 # Used for stage installs and pathing
 141 #
 142 DESTDIRBASE?=           ${OBJTREE}${.CURDIR}
 143
 144 TARGET_ARCH?=   ${MACHINE_ARCH}
 145 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 146 TARGET?=        ${MACHINE}
 147 .else
 148 TARGET?=        ${TARGET_ARCH}
 149 .endif
 150 .if make(buildworld)
 151 BUILD_ARCH!=    sysctl -n hw.machine_arch
 152 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 153 .error To cross-build, set TARGET_ARCH.
 154 .endif
 155 .endif
 156
 157 # BTOOLS        (Natively built) All non-cross-development tools that the
 158 #               main build needs.  This includes things like 'mkdir' and 'rm'.
 159 #               We will not use the native system's exec path once we start
 160 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
 161 #
 162 # CTOOLS        (Natively built) Cross development tools which are specific
 163 #               to the target architecture.
 164 #
 165 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
 166 #               CTOOLS.
 167 #
 168 # MACHINE_ARCH  Architecture we are building on
 169 # TARGET_ARCH   Architecture we are building for
 170 #
 171 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
 172 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
 173 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
 174
 175 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
 176 # cross-tools stages to augment the existing command path to access newer
 177 # versions of certain utilities such as 'patch' that the cross-tools stage
 178 # might expect.
 179 #
 180 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 181
 182 # The strict temporary command path contains all binaries required
 183 # by the buildworld system after the cross-tools stage.
 184 #
 185 STRICTTMPPATH=  ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 186
 187 TMPDIR?=        /tmp
 188 TMPPID!=        echo $$$$
 189
 190 #
 191 # Building a world goes through the following stages
 192 #
 193 # 1. bootstrap-tool stage [BMAKE]
 194 #       This stage is responsible for creating programs that
 195 #       are needed for backward compatibility reasons. They
 196 #       are not built as cross-tools.
 197 # 2. build-tool stage [TMAKE]
 198 #       This stage is responsible for creating the object
 199 #       tree and building any tools that are needed during
 200 #       the build process.
 201 # 3. cross-tool stage [XMAKE]
 202 #       This stage is responsible for creating any tools that
 203 #       are needed for cross-builds. A cross-compiler is one
 204 #       of them.
 205 # 4. world stage [WMAKE]
 206 #       This stage actually builds the world.
 207 # 5. install stage (optional) [IMAKE]
 208 #       This stage installs a previously built world.
 209 #
 210
 211 # bootstrap-tool stage
 212 #
 213 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 214                 OBJTREE=${OBJTREE} \
 215                 DESTDIR=${BTOOLSDEST} \
 216                 PATH=${BTOOLSPATH}:${PATH} \
 217                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 218
 219 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 220                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 221                 -DNO_WERROR
 222
 223 # build-tool stage
 224 #
 225 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 226                 OBJTREE=${OBJTREE} \
 227                 DESTDIR= \
 228                 PATH=${BTOOLSPATH}:${PATH} \
 229                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 230
 231 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 232                 -DNO_FORTRAN
 233
 234 # cross-tool stage
 235 #
 236 # note: TOOLS_PREFIX points to the obj root holding the cross
 237 #       compiler binaries, while USRDATA_PREFIX points to the obj root
 238 #       holding the target environment (and also determines where cross-built
 239 #       libraries, crt*.o, and include files are installed).
 240 #
 241 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
 242                 OBJTREE=${OBJTREE} \
 243                 DESTDIR=${CTOOLSDEST} \
 244                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 245                 TOOLS_PREFIX=${CTOOLSDEST} \
 246                 USRDATA_PREFIX=${WORLDDEST} \
 247                 PATH=${BTOOLSPATH}:${PATH}
 248
 249 XMAKE=          ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
 250                 -DBOOTSTRAPPING
 251
 252 # world stage, note the strict path and note that TOOLS_PREFIX is left
 253 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
 254 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
 255 # for both binary and library paths, even though it is being compiled to
 256 # WORLDDEST.  None of the programs in the world stage are ever actually
 257 # executed during the buildworld/installworld.
 258 #
 259 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
 260                 OBJTREE=${OBJTREE} \
 261                 MACHINE_ARCH=${TARGET_ARCH} \
 262                 MACHINE=${TARGET} \
 263                 OBJFORMAT_PATH=${CTOOLSDEST} \
 264                 PERL5LIB=${WORLDDEST}/usr/libdata/perl/5.00503 \
 265                 GROFF_BIN_PATH=${BTOOLSDEST}/usr/bin \
 266                 GROFF_FONT_PATH=${BTOOLSDEST}/usr/share/groff_font \
 267                 GROFF_TMAC_PATH=${BTOOLSDEST}/usr/share/tmac
 268
 269 WMAKEENV=       ${CROSSENV} \
 270                 DESTDIR=${WORLDDEST} \
 271                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 272                 PATH=${STRICTTMPPATH}
 273
 274 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 275
 276 # install stage
 277 #
 278 IMAKEENV=       ${CROSSENV} \
 279                 PATH=${STRICTTMPPATH}
 280 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 281
 282 # kernel stage
 283 #
 284 KMAKEENV=       ${WMAKEENV}
 285
 286 # buildworld
 287 #
 288 # Attempt to rebuild the entire system, with reasonable chance of
 289 # success, regardless of how old your existing system is.
 290 #
 291 _worldtmp:
 292         @echo
 293         @echo "--------------------------------------------------------------"
 294         @echo ">>> Rebuilding the temporary build tree"
 295         @echo "--------------------------------------------------------------"
 296 .if !defined(NOCLEAN)
 297         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 298 .else
 299         # XXX - These two can depend on any header file.
 300         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 301         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 302 .endif
 303         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 304 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
 305         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
 306                 -p ${_dir}/  > /dev/null
 307         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
 308                 -p ${_dir}/usr > /dev/null
 309 .endfor
 310         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
 311                 -p ${WORLDDEST}/usr/include > /dev/null
 312         ln -sf ${.CURDIR}/sys ${WORLDDEST}
 313
 314 _bootstrap-tools:
 315         @echo
 316         @echo "--------------------------------------------------------------"
 317         @echo ">>> stage 1: bootstrap tools"
 318         @echo "--------------------------------------------------------------"
 319         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 320 _cleanobj:
 321         @echo
 322         @echo "--------------------------------------------------------------"
 323         @echo ">>> stage 2a: cleaning up the object tree"
 324         @echo "--------------------------------------------------------------"
 325         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 326 _obj:
 327         @echo
 328         @echo "--------------------------------------------------------------"
 329         @echo ">>> stage 2b: rebuilding the object tree"
 330         @echo "--------------------------------------------------------------"
 331         cd ${.CURDIR}; ${WMAKE} par-obj
 332 _build-tools:
 333         @echo
 334         @echo "--------------------------------------------------------------"
 335         @echo ">>> stage 2c: build tools"
 336         @echo "--------------------------------------------------------------"
 337         cd ${.CURDIR}; ${TMAKE} build-tools
 338 _cross-tools:
 339         @echo
 340         @echo "--------------------------------------------------------------"
 341         @echo ">>> stage 3: cross tools"
 342         @echo "--------------------------------------------------------------"
 343         cd ${.CURDIR}; ${XMAKE} cross-tools
 344 _includes:
 345         @echo
 346         @echo "--------------------------------------------------------------"
 347         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
 348         @echo "--------------------------------------------------------------"
 349         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 350 _libraries:
 351         @echo
 352         @echo "--------------------------------------------------------------"
 353         @echo ">>> stage 4b: building libraries"
 354         @echo "--------------------------------------------------------------"
 355         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 356 _depend:
 357         @echo
 358         @echo "--------------------------------------------------------------"
 359         @echo ">>> stage 4c: make dependencies"
 360         @echo "--------------------------------------------------------------"
 361         cd ${.CURDIR}; ${WMAKE} par-depend
 362 everything:
 363         @echo
 364         @echo "--------------------------------------------------------------"
 365         @echo ">>> stage 4d: building everything.."
 366         @echo "--------------------------------------------------------------"
 367         cd ${.CURDIR}; ${WMAKE} all
 368
 369 # note: buildworld no longer depends on _cleanobj because we rm -rf the
 370 # entire object tree and built the bootstrap tools in a different location.
 371 #
 372 # buildworld    - build everything from scratch
 373 # quickworld    - skip the bootstrap, build, and cross-build steps
 374 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
 375 #
 376 # note: we include _obj in realquickworld to prevent accidental creation
 377 # of files in /usr/src.
 378
 379 WMAKE_TGTS=
 380 .if !defined(SUBDIR_OVERRIDE)
 381 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 382 .endif
 383 WMAKE_TGTS+=    _obj _build-tools
 384 .if !defined(SUBDIR_OVERRIDE)
 385 WMAKE_TGTS+=    _cross-tools
 386 .endif
 387 WMAKE_TGTS+=    _includes _libraries _depend everything
 388
 389 buildworld: ${WMAKE_TGTS}
 390
 391 quickworld: _obj _includes _libraries _depend everything
 392
 393 realquickworld: _obj _includes _libraries everything
 394
 395 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
 396
 397 .ORDER: ${WMAKE_TGTS}
 398
 399 #
 400 # installcheck
 401 #
 402 # Checks to be sure system is ready for installworld
 403 #
 404 installcheck:
 405 .if !defined(NO_SENDMAIL)
 406         @if ! `id -u smmsp > /dev/null`; then \
 407                 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
 408                 false; \
 409         fi
 410         @if ! `id -g smmsp > /dev/null`; then \
 411                 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
 412                 false; \
 413         fi
 414 .endif
 415
 416 #
 417 # distributeworld
 418 #
 419 # Distributes everything compiled by a `buildworld'.
 420 #
 421 # installworld
 422 #
 423 # Installs everything compiled by a 'buildworld'.
 424 #
 425 distributeworld installworld: installcheck
 426         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 427
 428 #
 429 # reinstall
 430 #
 431 # If you have a build server, you can NFS mount the source and obj directories
 432 # and do a 'make reinstall' on the *client* to install new binaries from the
 433 # most recent server build.
 434 #
 435 reinstall:
 436         @echo "--------------------------------------------------------------"
 437         @echo ">>> Making hierarchy"
 438         @echo "--------------------------------------------------------------"
 439         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 440         @echo
 441         @echo "--------------------------------------------------------------"
 442         @echo ">>> Installing everything.."
 443         @echo "--------------------------------------------------------------"
 444         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 445 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 446         @echo
 447         @echo "--------------------------------------------------------------"
 448         @echo ">>> Rebuilding man page indices"
 449         @echo "--------------------------------------------------------------"
 450         cd ${.CURDIR}/share/man; ${MAKE} makedb
 451 .endif
 452
 453 redistribute:
 454         @echo "--------------------------------------------------------------"
 455         @echo ">>> Distributing everything.."
 456         @echo "--------------------------------------------------------------"
 457         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 458
 459 #
 460 # buildkernel, nativekernel, quickkernel, and installkernel
 461 #
 462 # Which kernels to build and/or install is specified by setting
 463 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 464 # Only the existing (depending TARGET) config files are used
 465 # for building kernels and only the first of these is designated
 466 # as the one being installed.
 467 #
 468 # Note that we have to use TARGET instead of TARGET_ARCH when
 469 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 470 # be set to cross-build, we have to make sure TARGET is set
 471 # properly.
 472
 473 .if !defined(KERNCONF) && defined(KERNEL)
 474 KERNCONF=       ${KERNEL}
 475 KERNWARN=       yes
 476 .else
 477 KERNCONF?=      GENERIC
 478 .endif
 479 INSTKERNNAME?=  kernel
 480
 481 KRNLSRCDIR=     ${.CURDIR}/sys
 482 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
 483 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 484 KERNCONFDIR?=   ${KRNLCONFDIR}
 485
 486 BUILDKERNELS=
 487 INSTALLKERNEL=
 488 .for _kernel in ${KERNCONF}
 489 .if exists(${KERNCONFDIR}/${_kernel})
 490 BUILDKERNELS+=  ${_kernel}
 491 .if empty(INSTALLKERNEL)
 492 INSTALLKERNEL= ${_kernel}
 493 .endif
 494 .endif
 495 .endfor
 496
 497 #
 498 # buildkernel
 499 #
 500 # Builds all kernels defined by BUILDKERNELS.
 501 #
 502 bk_tools:
 503         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 504             echo "You must buildworld before buildkernel.  If you wish"; \
 505             echo "to build a kernel using native tools, config it manually"; \
 506             echo "or use the nativekernel target if you are in a rush"; \
 507             exit 1; \
 508             fi
 509
 510 bk_build_list:
 511 .if empty(BUILDKERNELS)
 512         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 513         @false
 514 .endif
 515
 516 bk_kernwarn:
 517 .if defined(KERNWARN)
 518         @echo "--------------------------------------------------------------"
 519         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 520         @echo "--------------------------------------------------------------"
 521         @sleep 3
 522 .endif
 523         @echo
 524
 525 # The buildkernel target rebuilds the specified kernels from scratch
 526 # using the crossbuild tools generated by the last buildworld.  It is
 527 # the safest (but also the most time consuming) way to build a new kernel.
 528 #
 529 buildkernel:    bk_tools bk_build_list bk_kernwarn
 530 .for _kernel in ${BUILDKERNELS}
 531         @echo "--------------------------------------------------------------"
 532         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 533         @echo "--------------------------------------------------------------"
 534         @echo "===> ${_kernel}"
 535 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 536         rm -rf ${KRNLOBJDIR}/${_kernel}
 537 .else
 538         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 539                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
 540                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 541 .endif
 542         mkdir -p ${KRNLOBJDIR}
 543 .if !defined(NO_KERNELCONFIG)
 544         cd ${KRNLCONFDIR}; \
 545                 PATH=${STRICTTMPPATH} \
 546                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 547                         ${KERNCONFDIR}/${_kernel}
 548 .endif
 549         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
 550         cd ${KRNLOBJDIR}/${_kernel}; \
 551             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 552             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 553 .if !defined(NO_KERNELDEPEND)
 554         cd ${KRNLOBJDIR}/${_kernel}; \
 555             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 556 .endif
 557         cd ${KRNLOBJDIR}/${_kernel}; \
 558             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 559         @echo "--------------------------------------------------------------"
 560         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 561         @echo "--------------------------------------------------------------"
 562 .endfor
 563
 564 # The nativekernel target rebuilds the specified kernels from scratch
 565 # using the systems standard compiler rather then using the crossbuild
 566 # tools generated by the last buildworld.  This is fairly safe if your
 567 # system is reasonable up-to-date.
 568 #
 569 nativekernel:   bk_build_list bk_kernwarn
 570 .for _kernel in ${BUILDKERNELS}
 571         @echo "--------------------------------------------------------------"
 572         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 573         @echo "--------------------------------------------------------------"
 574         @echo "===> ${_kernel}"
 575 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 576         rm -rf ${KRNLOBJDIR}/${_kernel}
 577 .else
 578         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
 579                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
 580                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 581 .endif
 582         mkdir -p ${KRNLOBJDIR}
 583 .if !defined(NO_KERNELCONFIG)
 584         cd ${KRNLCONFDIR}; \
 585                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 586                         ${KERNCONFDIR}/${_kernel}
 587 .endif
 588         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
 589         cd ${KRNLOBJDIR}/${_kernel}; \
 590             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 591             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 592 .if !defined(NO_KERNELDEPEND)
 593         cd ${KRNLOBJDIR}/${_kernel}; \
 594             ${MAKE} KERNEL=${INSTKERNNAME} depend
 595 .endif
 596         cd ${KRNLOBJDIR}/${_kernel}; \
 597             ${MAKE} KERNEL=${INSTKERNNAME} all
 598         @echo "--------------------------------------------------------------"
 599         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 600         @echo "--------------------------------------------------------------"
 601 .endfor
 602
 603 # The quickkernel target rebuilds the specified kernels as quickly
 604 # as possible.  It will use the native tools or the buildworld cross tools
 605 # based on whether the kernel was originally generated via buildkernel or
 606 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt,
 607 # nor is the make depend step run.
 608 #
 609 quickkernel:    bk_tools bk_build_list bk_kernwarn
 610 .for _kernel in ${BUILDKERNELS}
 611         @echo "--------------------------------------------------------------"
 612         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 613         @echo "--------------------------------------------------------------"
 614         @echo "===> ${_kernel}"
 615 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 616 .if !defined(NO_KERNELCONFIG)
 617         cd ${KRNLCONFDIR}; \
 618                 PATH=${STRICTTMPPATH} \
 619                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 620                         ${KERNCONFDIR}/${_kernel}
 621 .endif
 622         cd ${KRNLOBJDIR}/${_kernel}; \
 623             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 624 .else
 625 .if !defined(NO_KERNELCONFIG)
 626         cd ${KRNLCONFDIR}; \
 627             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 628                 ${KERNCONFDIR}/${_kernel}
 629 .endif
 630         cd ${KRNLOBJDIR}/${_kernel}; \
 631             ${MAKE} KERNEL=${INSTKERNNAME} all
 632 .endif
 633         @echo "--------------------------------------------------------------"
 634         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 635         @echo "--------------------------------------------------------------"
 636 .endfor
 637
 638
 639 # installkernel
 640 #
 641 # Install the kernel defined by INSTALLKERNEL
 642 #
 643 installkernel reinstallkernel:
 644         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 645             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 646
 647 #
 648 # update
 649 #
 650 # Update the source tree, by running sup and/or running cvs to update to the
 651 # latest copy.
 652 #
 653 update:
 654 .if defined(SUP_UPDATE)
 655         @echo "--------------------------------------------------------------"
 656         @echo ">>> Running ${SUP}"
 657         @echo "--------------------------------------------------------------"
 658 .if defined(SUPFILE)
 659         @${SUP} ${SUPFLAGS} ${SUPFILE}
 660 .endif
 661 .if defined(SUPFILE1)
 662         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 663 .endif
 664 .if defined(SUPFILE2)
 665         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 666 .endif
 667 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 668         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 669 .endif
 670 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 671         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 672 .endif
 673 .endif
 674 .if defined(CVS_UPDATE)
 675         @echo "--------------------------------------------------------------"
 676         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 677         @echo "--------------------------------------------------------------"
 678         cd ${.CURDIR}; cvs -q update -rRELENG_4 -P -d
 679 .endif
 680
 681 #
 682 # most
 683 #
 684 # Build most of the user binaries on the existing system libs and includes.
 685 #
 686 most:
 687         @echo "--------------------------------------------------------------"
 688         @echo ">>> Building programs only"
 689         @echo "--------------------------------------------------------------"
 690 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 691         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 692 .endfor
 693
 694 #
 695 # installmost
 696 #
 697 # Install the binaries built by the 'most' target.  This does not include
 698 # libraries or include files.
 699 #
 700 installmost:
 701         @echo "--------------------------------------------------------------"
 702         @echo ">>> Installing programs only"
 703         @echo "--------------------------------------------------------------"
 704 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 705         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 706 .endfor
 707
 708 #
 709 # ------------------------------------------------------------------------
 710 #
 711 # From here onwards are utility targets used by the 'make world' and
 712 # related targets.  If your 'world' breaks, you may like to try to fix
 713 # the problem and manually run the following targets to attempt to
 714 # complete the build.  Beware, this is *not* guaranteed to work, you
 715 # need to have a pretty good grip on the current state of the system
 716 # to attempt to manually finish it.  If in doubt, 'make world' again.
 717 #
 718
 719 # bootstrap-tools: Build all tools required to build all tools.  Note that
 720 # order is important in a number of cases and also note that the bootstrap
 721 # and build tools stages have access to earlier binaries they themselves
 722 # had generated.
 723 #
 724 # patch:        older patch's do not have -i.  This program must be built
 725 #               first so other bootstrap tools that need to apply patches
 726 #               can use it.
 727 # [x]install:   dependancies on various new install features
 728 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 729 #               envs are not compatible with older objformat binaries.
 730 #
 731 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 732 _strfile=       games/fortune/strfile
 733 .endif
 734
 735 bootstrap-tools:
 736 .for _tool in ${_strfile} \
 737     gnu/usr.bin/patch \
 738     bin/chmod bin/cp bin/dd bin/mkdir bin/rm bin/echo bin/test \
 739     bin/cat bin/date bin/ln bin/mv bin/csh bin/expr bin/sh bin/ls \
 740     bin/hostname bin/kill \
 741     sbin/sysctl \
 742     usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
 743     usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/file \
 744     usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
 745     usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
 746     usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
 747     usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
 748     usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
 749     usr.bin/vi usr.bin/cap_mkdb usr.bin/vgrind usr.bin/true usr.bin/false \
 750     usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
 751     usr.sbin/chown usr.sbin/mtree usr.sbin/config \
 752     usr.sbin/btxld usr.sbin/pwd_mkdb usr.sbin/zic usr.sbin/makewhatis \
 753     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo \
 754     gnu/usr.bin/grep gnu/usr.bin/sort \
 755     gnu/usr.bin/gzip usr.bin/bzip2
 756         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
 757                 cd ${.CURDIR}/${_tool}; \
 758                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 759                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 760                 ${MAKE} DIRPRFX=${_tool}/ all; \
 761                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 762 .endfor
 763         touch ${BTOOLSDEST}/.bootstrap_done
 764
 765 # build-tools: Build special purpose build tools.  gcc2 related tools are
 766 # only built under the i386 architecture.  Other architectures are
 767 # gcc3-only.
 768 #
 769 # XXX we may be able to remove or consolidate this into bootstrap-tools
 770 # now that we have the native helper (.nx/.no) infrastructure.
 771 #
 772 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 773 _games= games/adventure games/hack games/phantasia
 774 .endif
 775
 776 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 777 _share= share/syscons/scrnmaps
 778 .endif
 779
 780 _gcc34_cross= gnu/usr.bin/cc34
 781 _gcc34_tools= gnu/usr.bin/cc34/cc_prep gnu/usr.bin/cc34/cc_tools
 782 .if ${MACHINE_ARCH} == "i386" && ${TARGET_ARCH} == "i386"
 783 _gcc2_cross= gnu/usr.bin/cc
 784 _gcc2_tools= gnu/usr.bin/cc/cc_tools
 785 _binutils= gnu/usr.bin/binutils gnu/usr.bin/binutils214
 786 .else
 787 _binutils= gnu/usr.bin/binutils214
 788 .endif
 789
 790 .if !defined(NO_FORTRAN)
 791 .if ${TARGET_ARCH} == "i386"
 792 _fortran= gnu/usr.bin/cc/f771
 793 .else
 794 _fortran= gnu/usr.bin/cc34/f771
 795 .endif
 796 .endif
 797
 798 .if !defined(NOPERL)
 799 _perl=  gnu/usr.bin/perl/miniperl
 800 .endif
 801
 802 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 803     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 804 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
 805     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 806 .endif
 807
 808 .if defined(RELEASEDIR)
 809 _sysinstall= release/sysinstall
 810 .endif
 811
 812 build-tools:
 813 .for _tool in ${_gcc2_tools} ${_gcc34_tools} \
 814               ${_fortran} ${_perl} ${_libroken4} ${_libkrb5} \
 815               ${_share} ${_sysinstall}
 816         ${ECHODIR} "===> ${_tool} (build-tools)"; \
 817                 cd ${.CURDIR}/${_tool}; \
 818                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 819                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 820                 ${MAKE} DIRPRFX=${_tool}/ all; \
 821                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 822 .endfor
 823         touch ${BTOOLSDEST}/.build_done
 824
 825 #
 826 # cross-tools: Build cross-building tools
 827 #
 828 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
 829 _elf2exe=       usr.sbin/elf2exe
 830 .endif
 831
 832 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 833 _btxld= usr.sbin/btxld
 834 .endif
 835
 836 cross-tools:
 837 .for _tool in ${_btxld} ${_elf2exe} ${_binutils} \
 838               usr.bin/objformat usr.sbin/crunch/crunchide \
 839               ${_gcc2_cross} ${_gcc34_cross}
 840         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
 841                 cd ${.CURDIR}/${_tool}; \
 842                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 843                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 844                 ${MAKE} DIRPRFX=${_tool}/ all; \
 845                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
 846 .endfor
 847         touch ${CTOOLSDEST}/.cross_done
 848
 849 #
 850 # hierarchy - ensure that all the needed directories are present
 851 #
 852 hierarchy:
 853         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 854
 855 #
 856 # libraries - build all libraries, and install them under ${DESTDIR}.
 857 #
 858 # The list of libraries with dependents (${_prebuild_libs}) and their
 859 # interdependencies (__L) are built automatically by the
 860 # ${.CURDIR}/tools/make_libdeps.sh script.
 861 #
 862 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
 863 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
 864 #
 865 libraries:
 866         cd ${.CURDIR}; \
 867             HOST_CCVER=${HOST_CCVER} CCVER=gcc2 \
 868                 ${MAKE} -f Makefile.inc1 _startup_libs2; \
 869             HOST_CCVER=${HOST_CCVER} CCVER=gcc34 \
 870                 ${MAKE} -f Makefile.inc1 _startup_libs34; \
 871             ${MAKE} -f Makefile.inc1 _startup_libs; \
 872             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 873             ${MAKE} -f Makefile.inc1 _generic_libs;
 874         touch ${WORLDDEST}/.libraries_done
 875
 876 # These dependencies are not automatically generated:
 877 #
 878 # gnu/lib/libgcc and lib/csu must be built before all
 879 # shared libraries for ELF.  The targets for _startup_libs{2,3} are
 880 # specifically built using gcc{2,3}.
 881 #
 882 _startup_libs2= gnu/lib/gcc2/libgcc
 883 _startup_libs34=        gnu/lib/gcc34/libgcc
 884 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
 885 _startup_libs=  lib/csu/${MACHINE_ARCH}-elf
 886 .else
 887 _startup_libs=  lib/csu/${MACHINE_ARCH}
 888 .endif
 889 _startup_libs+= lib/csu/common lib/libc
 890
 891 _prebuild_libs=
 892
 893 _generic_libs=  gnu/lib
 894
 895 .if !defined(NOPERL)
 896 _generic_libs+= gnu/usr.bin/perl/libperl
 897 .endif
 898
 899 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 900 _prebuild_libs+=        kerberos5/lib/libasn1
 901 _prebuild_libs+=        kerberos5/lib/libgssapi
 902 _prebuild_libs+=        kerberos5/lib/libkrb5
 903 _prebuild_libs+=        kerberos5/lib/libroken
 904 _generic_libs+= kerberos5/lib
 905 .endif
 906
 907 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
 908                 lib/libncurses lib/libopie lib/libradius lib/libskey \
 909                 lib/libtacplus lib/libutil \
 910                 lib/libz lib/msun
 911
 912 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 913 lib/libskey__L: lib/libcrypt__L lib/libmd__L
 914
 915 _generic_libs+= lib
 916
 917 .if !defined(NOCRYPT)
 918 .if !defined(NO_OPENSSL)
 919 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 920 .if !defined(NO_OPENSSH)
 921 _prebuild_libs+=        secure/lib/libssh
 922 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 923 .endif
 924 .endif
 925 _generic_libs+= secure/lib
 926 .endif
 927
 928 _generic_libs+= usr.bin/lex/lib
 929
 930 .if ${MACHINE_ARCH} == "i386"
 931 _generic_libs+= usr.sbin/pcvt/keycap
 932 .endif
 933
 934 .for _lib in ${_startup_libs2} ${_startup_libs3} ${_startup_libs34} \
 935                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
 936 ${_lib}__L: .PHONY
 937 .if exists(${.CURDIR}/${_lib})
 938         ${ECHODIR} "===> ${_lib}"; \
 939                 cd ${.CURDIR}/${_lib}; \
 940                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 941                 ${MAKE} DIRPRFX=${_lib}/ all; \
 942                 ${MAKE} DIRPRFX=${_lib}/ install
 943 .endif
 944 .endfor
 945
 946 # only mess with gcc2 for i386 architectures.
 947 #
 948 _startup_libs: ${_startup_libs:S/$/__L/}
 949 .if ${TARGET_ARCH} == "i386"
 950 _startup_libs2: ${_startup_libs2:S/$/__L/}
 951 .else
 952 _startup_libs2:
 953 .endif
 954 _startup_libs3: ${_startup_libs3:S/$/__L/}
 955 _startup_libs34: ${_startup_libs34:S/$/__L/}
 956 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 957 _generic_libs: ${_generic_libs:S/$/__L/}
 958
 959 # library targets must be ordered because there are inter-library
 960 # races (e.g. generation of tconfig.h)
 961 #
 962 .ORDER: ${_startup_libs2:S/$/__L/}
 963 .ORDER: ${_startup_libs3:S/$/__L/}
 964 .ORDER: ${_startup_libs34:S/$/__L/}
 965 .ORDER: ${_startup_libs:S/$/__L/}
 966 .ORDER: ${_prebuild_libs:S/$/__L/}
 967 .ORDER: ${_generic_libs:S/$/__L/}
 968
 969 .for __target in clean cleandepend cleandir obj depend includes
 970 .for entry in ${SUBDIR}
 971 ${entry}.${__target}__D: .PHONY
 972         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 973                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 974                 edir=${entry}.${MACHINE_ARCH}; \
 975                 cd ${.CURDIR}/$${edir}; \
 976         else \
 977                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 978                 edir=${entry}; \
 979                 cd ${.CURDIR}/$${edir}; \
 980         fi; \
 981         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 982 .endfor
 983 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 984 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
 985 .endfor
 986 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
 987
 988 # The wmake target is used by /usr/bin/wmake to run make in a
 989 # world build environment.
 990 #
 991 wmake:
 992         @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
 993
 994 wmakeenv:
 995         @echo '${WMAKEENV} /bin/sh'
 996
 997 bmake:
 998         @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
 999
1000 bmakeenv:
1001         @echo '${BMAKEENV} /bin/sh'
1002
1003 tmake:
1004         @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
1005
1006 tmakeenv:
1007         @echo '${TMAKEENV} /bin/sh'
1008
1009 .include <bsd.subdir.mk>
1010