2 * Taken from the original FreeBSD user SCSI library.
4 /* Copyright (c) 1994 HD Associates
5 * (contact: dufault@hda.com)
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by HD Associates
19 * 4. Neither the name of the HD Associaates nor the names of its contributors
20 * may be used to endorse or promote products derived from this software
21 * without specific prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY HD ASSOCIATES``AS IS'' AND
24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 * ARE DISCLAIMED. IN NO EVENT SHALL HD ASSOCIATES OR CONTRIBUTORS BE LIABLE
27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * From: scsi.c,v 1.8 1997/02/22 15:07:54 peter Exp $
35 * $FreeBSD: src/lib/libcam/scsi_cmdparse.c,v 1.3.2.1 2000/08/14 05:42:30 kbyanc Exp $
36 * $DragonFly: src/lib/libcam/scsi_cmdparse.c,v 1.2 2003/06/17 04:26:48 dillon Exp $
42 #include <sys/errno.h>
47 #include <cam/cam_ccb.h>
48 #include <cam/scsi/scsi_message.h>
52 * Decode: Decode the data section of a scsireq. This decodes
55 * fields : field fields
58 * field : field_specifier
62 * control : 's' seek_value
63 * | 's' '+' seek_value
66 * seek_value : DECIMAL_NUMBER
67 * | 'v' // For indirect seek, i.e., value from the arg list
70 * field_specifier : type_specifier field_width
71 * | '{' NAME '}' type_specifier field_width
74 * field_width : DECIMAL_NUMBER
77 * type_specifier : 'i' // Integral types (i1, i2, i3, i4)
80 * | 'c' // Character arrays
81 * | 'z' // Character arrays with zeroed trailing spaces
85 * 1. Integral types are swapped into host order.
86 * 2. Bit fields are allocated MSB to LSB to match the SCSI spec documentation.
87 * 3. 's' permits "seeking" in the string. "s+DECIMAL" seeks relative to
88 * DECIMAL; "sDECIMAL" seeks absolute to decimal.
89 * 4. 's' permits an indirect reference. "sv" or "s+v" will get the
90 * next integer value from the arg array.
91 * 5. Field names can be anything between the braces
94 * i and b types are promoted to ints.
99 do_buff_decode(u_int8_t *databuf, size_t len,
100 void (*arg_put)(void *, int , void *, int, char *),
101 void *puthook, char *fmt, va_list ap)
108 static u_char mask[] = {0, 0x01, 0x03, 0x07, 0x0f,
109 0x1f, 0x3f, 0x7f, 0xff};
111 u_char *base = databuf;
115 # define ARG_PUT(ARG) \
121 (*arg_put)(puthook, (letter == 't' ? \
123 (void *)((long)(ARG)), width, \
126 *(va_arg(ap, int *)) = (ARG); \
133 u_char bits = 0; /* For bit fields */
134 int shift = 0; /* Bits already shifted out */
139 switch(letter = *fmt) {
140 case ' ': /* White space */
148 case '#': /* Comment */
149 while (*fmt && (*fmt != '\n'))
152 fmt++; /* Skip '\n' */
155 case '*': /* Suppress assignment */
160 case '{': /* Field Name */
163 fmt++; /* Skip '{' */
164 while (*fmt && (*fmt != '}')) {
165 if (i < sizeof(field_name))
166 field_name[i++] = *fmt;
171 fmt++; /* Skip '}' */
176 case 't': /* Bit (field) */
179 width = strtol(fmt, &fmt, 10);
187 value = (bits >> (shift - width)) &
191 printf("shift %2d bits %02x value %02x width %2d mask %02x\n",
192 shift, bits, value, width, mask[width]);
201 case 'i': /* Integral values */
204 width = strtol(fmt, &fmt, 10);
212 ARG_PUT((*databuf) << 8 | *(databuf + 1));
217 ARG_PUT((*databuf) << 16 |
218 (*(databuf + 1)) << 8 | *(databuf + 2));
223 ARG_PUT((*databuf) << 24 |
224 (*(databuf + 1)) << 16 |
225 (*(databuf + 2)) << 8 |
237 case 'c': /* Characters (i.e., not swapped) */
238 case 'z': /* Characters with zeroed trailing
242 width = strtol(fmt, &fmt, 10);
246 (letter == 't' ? 'b' : letter),
247 databuf, width, field_name);
250 dest = va_arg(ap, char *);
251 bcopy(databuf, dest, width);
254 for (p = dest + width - 1;
276 if (tolower(*fmt) == 'v') {
278 * You can't suppress a seek value. You also
279 * can't have a variable seek when you are using
282 width = (arg_put) ? 0 : va_arg(ap, int);
285 width = strtol(fmt, &fmt, 10);
288 databuf += width; /* Relative seek */
290 databuf = base + width; /* Absolute seek */
299 fprintf(stderr, "Unknown letter in format: %c\n",
309 /* next_field: Return the next field in a command specifier. This
310 * builds up a SCSI command using this trivial grammar:
312 * fields : field fields
316 * | value ':' field_width
319 * field_width : digit
320 * | 'i' digit // i2 = 2 byte integer, i3 = 3 byte integer etc.
324 * | 'v' // For indirection.
328 * Bit fields are specified MSB first to match the SCSI spec.
332 * WRITE BUFFER: "38 v:3 0:2 0:3 v v:i3 v:i3 0", mode, buffer_id, list_length
334 * The function returns the value:
335 * 0: For reached end, with error_p set if an error was found
336 * 1: For valid stuff setup
337 * 2: For "v" was entered as the value (implies use varargs)
342 next_field(char **pp, char *fmt, int *width_p, int *value_p, char *name,
343 int n_name, int *error_p, int *suppress_p)
357 int field_size; /* Default to byte field type... */
358 int field_width; /* 1 byte wide */
362 field_size = 8; /* Default to byte field type... */
364 field_width = 1; /* 1 byte wide */
368 state = BETWEEN_FIELDS;
370 while (state != DONE) {
375 else if (isspace(*p))
377 else if (*p == '#') {
378 while (*p && *p != '\n')
382 } else if (*p == '{') {
387 while (*p && *p != '}') {
388 if(name && i < n_name) {
395 if(name && i < n_name)
400 } else if (*p == '*') {
403 } else if (isxdigit(*p)) {
405 value = strtol(p, &p, 16);
407 } else if (tolower(*p) == 'v') {
412 } else if (tolower(*p) == 'i') {
414 * Try to work without the "v".
422 field_width = strtol(p, &p, 10);
425 } else if (tolower(*p) == 't') {
427 * XXX: B can't work: Sees the 'b' as a
428 * hex digit in "isxdigit". try "t" for
437 field_width = strtol(p, &p, 10);
439 } else if (tolower(*p) == 's') {
443 if (tolower(*p) == 'v') {
449 value = strtol(p, &p, 0);
453 fprintf(stderr, "Invalid starting "
454 "character: %c\n", *p);
463 field_size = 1; /* Default to bits
474 field_width = strtol(p, &p, 10);
476 } else if (*p == 'i') {
478 /* Integral (bytes) */
483 field_width = strtol(p, &p, 10);
485 } else if (*p == 'b') {
492 field_width = strtol(p, &p, 10);
495 fprintf(stderr, "Invalid startfield %c "
514 *width_p = field_width * field_size;
516 *suppress_p = suppress;
522 do_encode(u_char *buff, size_t vec_max, size_t *used,
523 int (*arg_get)(void *, char *), void *gethook, char *fmt, va_list ap)
529 int width, value, error, suppress;
538 while ((ret = next_field(&fmt, &c, &width, &value, field_name,
539 sizeof(field_name), &error, &suppress))) {
547 (*arg_get)(gethook, field_name) :
553 "do_encode: ret %d fmt %c width %d value %d name \"%s\" error %d suppress %d\n",
554 ret, c, width, value, field_name, error, suppress);
562 /* A width of < 8 is a bit field. */
565 /* This is a bit field. We start with the high bits
566 * so it reads the same as the SCSI spec.
571 val |= (value << (8 - shift));
589 case 8: /* 1 byte integer */
594 case 16: /* 2 byte integer */
595 if (ind < vec_max - 2 + 1) {
596 buff[ind++] = value >> 8;
601 case 24: /* 3 byte integer */
602 if (ind < vec_max - 3 + 1) {
603 buff[ind++] = value >> 16;
604 buff[ind++] = value >> 8;
609 case 32: /* 4 byte integer */
610 if (ind < vec_max - 4 + 1) {
611 buff[ind++] = value >> 24;
612 buff[ind++] = value >> 16;
613 buff[ind++] = value >> 8;
619 fprintf(stderr, "do_encode: Illegal width\n");
625 /* Flush out any remaining bits
627 if (shift && ind < vec_max) {
643 csio_decode(struct ccb_scsiio *csio, char *fmt, ...)
649 return(do_buff_decode(csio->data_ptr, (size_t)csio->dxfer_len,
654 csio_decode_visit(struct ccb_scsiio *csio, char *fmt,
655 void (*arg_put)(void *, int, void *, int, char *),
661 * We need some way to output things; we can't do it without
662 * the arg_put function.
667 bzero(&ap, sizeof(ap));
669 return(do_buff_decode(csio->data_ptr, (size_t)csio->dxfer_len,
670 arg_put, puthook, fmt, ap));
674 buff_decode(u_int8_t *buff, size_t len, char *fmt, ...)
680 return(do_buff_decode(buff, len, 0, 0, fmt, ap));
684 buff_decode_visit(u_int8_t *buff, size_t len, char *fmt,
685 void (*arg_put)(void *, int, void *, int, char *),
691 * We need some way to output things; we can't do it without
692 * the arg_put function.
697 bzero(&ap, sizeof(ap));
699 return(do_buff_decode(buff, len, arg_put, puthook, fmt, ap));
703 * Build a SCSI CCB, given the command and data pointers and a format
704 * string describing the
707 csio_build(struct ccb_scsiio *csio, u_int8_t *data_ptr, u_int32_t dxfer_len,
708 u_int32_t flags, int retry_count, int timeout, char *cmd_spec, ...)
717 bzero(csio, sizeof(struct ccb_scsiio));
719 va_start(ap, cmd_spec);
721 if ((retval = do_encode(csio->cdb_io.cdb_bytes, SCSI_MAX_CDBLEN,
722 &cmdlen, NULL, NULL, cmd_spec, ap)) == -1)
726 /* retries */ retry_count,
729 /* tag_action */ MSG_SIMPLE_Q_TAG,
730 /* data_ptr */ data_ptr,
731 /* dxfer_len */ dxfer_len,
732 /* sense_len */ SSD_FULL_SIZE,
733 /* cdb_len */ cmdlen,
734 /* timeout */ timeout ? timeout : 5000);
740 csio_build_visit(struct ccb_scsiio *csio, u_int8_t *data_ptr,
741 u_int32_t dxfer_len, u_int32_t flags, int retry_count,
742 int timeout, char *cmd_spec,
743 int (*arg_get)(void *hook, char *field_name), void *gethook)
753 * We need something to encode, but we can't get it without the
759 bzero(&ap, sizeof(ap));
761 bzero(csio, sizeof(struct ccb_scsiio));
763 if ((retval = do_encode(csio->cdb_io.cdb_bytes, SCSI_MAX_CDBLEN,
764 &cmdlen, arg_get, gethook, cmd_spec, ap)) == -1)
768 /* retries */ retry_count,
771 /* tag_action */ MSG_SIMPLE_Q_TAG,
772 /* data_ptr */ data_ptr,
773 /* dxfer_len */ dxfer_len,
774 /* sense_len */ SSD_FULL_SIZE,
775 /* cdb_len */ cmdlen,
776 /* timeout */ timeout ? timeout : 5000);
782 csio_encode(struct ccb_scsiio *csio, char *fmt, ...)
791 return(do_encode(csio->data_ptr, csio->dxfer_len, 0, 0, 0, fmt, ap));
795 buff_encode_visit(u_int8_t *buff, size_t len, char *fmt,
796 int (*arg_get)(void *hook, char *field_name), void *gethook)
801 * We need something to encode, but we can't get it without the
807 bzero(&ap, sizeof(ap));
809 return(do_encode(buff, len, 0, arg_get, gethook, fmt, ap));
813 csio_encode_visit(struct ccb_scsiio *csio, char *fmt,
814 int (*arg_get)(void *hook, char *field_name), void *gethook)
819 * We need something to encode, but we can't get it without the
825 bzero(&ap, sizeof(ap));
827 return(do_encode(csio->data_ptr, csio->dxfer_len, 0, arg_get,