Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 #
   4 # This file defines the user-driven targets.
   5 #
   6 # Standard targets are documented in the makefiles in /usr/share/mk and include:
   7 #       obj depend all install clean cleandepend cleanobj
   8 #
   9 # Build-time options are documented in make.conf(5).
  10 #
  11
  12 DFLYVERSION!=   awk '/^\#define[[:blank:]]__DragonFly_version/ {print $$3}' \
  13                 < ${.CURDIR}/sys/sys/param.h
  14
  15 OSREL!=         echo ${DFLYVERSION} | \
  16                 awk '{a=int($$1/100000); b=int(($$1-(a*100000))/100); \
  17                 print a "." b}'
  18
  19 # Put initial settings here.
  20 SUBDIR=
  21
  22 # /libexec/ld-elf.so.2 needs to be installed first
  23 # Otherwise, install(1) beeing a dynamically linked binary will fail
  24 # during the first upgrade from a static to a dynamic world
  25 SUBDIR+= libexec
  26
  27 # We need to do include and lib early.
  28 #
  29 SUBDIR+= include
  30 SUBDIR+= lib
  31
  32 SUBDIR+= bin
  33 .if !defined(NO_GAMES)
  34 SUBDIR+= games
  35 .endif
  36 SUBDIR+= gnu
  37 SUBDIR+= sbin
  38 .if !defined(NO_SHARE)
  39 SUBDIR+= share
  40 .endif
  41 SUBDIR+= stand
  42 SUBDIR+= sys
  43 SUBDIR+= usr.bin
  44 SUBDIR+= usr.sbin
  45
  46 SUBDIR+= etc
  47
  48 # These are last, since it is nice to at least get the base system
  49 # rebuilt before you do them.
  50 .if defined(LOCAL_DIRS)
  51 .for _DIR in ${LOCAL_DIRS}
  52 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
  53 SUBDIR+= ${_DIR}
  54 .endif
  55 .endfor
  56 .endif
  57
  58 .if defined(SUBDIR_OVERRIDE)
  59 SUBDIR=         ${SUBDIR_OVERRIDE}
  60 .endif
  61
  62 .if defined(NOCLEANDIR)
  63 CLEANDIR=       clean cleandepend
  64 .else
  65 CLEANDIR=       cleandir
  66 .endif
  67
  68 .if defined(NO_CLEAN)
  69 NOCLEAN=        # defined
  70 .endif
  71
  72 # Object directory base in primary make.  Note that when we rerun make
  73 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
  74 # subdirectory because the rest of the build system needs it that way.
  75 # The original object directory base is saved in OBJTREE.
  76 #
  77 MAKEOBJDIRPREFIX?=      /usr/obj
  78 OBJTREE?=               ${MAKEOBJDIRPREFIX}
  79
  80 # Used for stage installs and pathing
  81 #
  82 DESTDIRBASE:=           ${OBJTREE}${.CURDIR}
  83
  84 # Remove DESTDIR from MAKEFLAGS.  It is present in the environment
  85 # anyhow, and we need to be able to override it for stage installs
  86 .MAKEFLAGS:=    ${.MAKEFLAGS:NDESTDIR=*}
  87
  88 # This section sets the tools used to build the world/kernel
  89 WORLD_CCVER?=           gcc80
  90 WORLD_LDVER?=           ld.bfd
  91 WORLD_BINUTILSVER?=     binutils234
  92
  93 .if !defined(NO_BACKUP)
  94 # Set the backup parameters if they are not already defined
  95 #
  96 WORLD_BACKUP?=          /var/backups/world_backup
  97 AUTO_BACKUP?=           ${OBJTREE}/world_backup/${DESTDIR}
  98 .endif
  99
 100 TARGET_ARCH?=   ${MACHINE_ARCH}
 101 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 102 TARGET?=        ${MACHINE}
 103 .else
 104 TARGET?=        ${TARGET_ARCH}
 105 .endif
 106 .if make(buildworld)
 107 BUILD_ARCH!=    sysctl -n hw.machine_arch
 108
 109 # temporary until everybody has converted to x86_64
 110 .if ${BUILD_ARCH} == "amd64"
 111 BUILD_ARCH=     x86_64
 112 .endif
 113
 114 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 115 .error To cross-build, set TARGET_ARCH.
 116 .endif
 117 .endif
 118
 119 # XXX this is ugly and we need to come up with a nicer solution
 120 .if !defined(TARGET_PLATFORM)
 121 .if ${TARGET_ARCH} == "x86_64"
 122 TARGET_PLATFORM= pc64
 123 .else
 124 .error Unknown target architecture.
 125 .endif
 126 .endif
 127
 128 THREAD_LIB?=    thread_xu
 129
 130 # BTOOLS        (Natively built) All non-cross-development tools that the
 131 #               main build needs.  This includes things like 'mkdir' and 'rm'.
 132 #               We will not use the native system's exec path once we start
 133 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
 134 #
 135 # CTOOLS        (Natively built) Cross development tools which are specific
 136 #               to the target architecture.
 137 #
 138 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
 139 #               CTOOLS.
 140 #
 141 # MACHINE_PLATFORM      Platform Architecture we are building on
 142 # MACHINE               Machine Architecture (usually the same as MACHINE_ARCH)
 143 # MACHINE_ARCH          CPU Architecture we are building on
 144 #
 145 # TARGET_PLATFORM       Platform Architecture we are building for
 146 # TARGET                Machine Architecture we are building for
 147 # TARGET_ARCH           CPU Architecture we are building for
 148 #
 149 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
 150 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
 151 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
 152
 153 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
 154 # cross-tools stages to augment the existing command path to access newer
 155 # versions of certain utilities that the cross-tools stage might expect.
 156 #
 157 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/sbin:${BTOOLSDEST}/bin
 158
 159 # The cross-tools path containing the cross-tools to cross build the
 160 # ultimate world.
 161 #
 162 CTOOLSPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/sbin:${CTOOLSDEST}/bin
 163
 164 # The strict temporary command path contains all binaries required
 165 # by the buildworld system after the cross-tools stage.
 166 #
 167 # NOTE: Append '/usr/local/bin:/usr/pkg/bin' to support external compilers.
 168 #       See compilers.conf(5) man page for more info.
 169 #
 170 STRICTTMPPATH= ${CTOOLSPATH}:${BTOOLSPATH}:/usr/local/bin:/usr/pkg/bin
 171
 172 TMPDIR?=        /tmp
 173 TMPPID!=        echo $$$$
 174
 175 #
 176 # Building a world goes through the following stages
 177 #
 178 # 1. bootstrap-tool stage [BMAKE]
 179 #       This stage is responsible for creating programs that
 180 #       are needed for backward compatibility reasons. They
 181 #       are not built as cross-tools.
 182 # 2. build-tool stage [TMAKE]
 183 #       This stage is responsible for creating the object
 184 #       tree and building any tools that are needed during
 185 #       the build process.
 186 # 3. cross-tool stage [XMAKE]
 187 #       This stage is responsible for creating any tools that
 188 #       are needed for cross-builds. A cross-compiler is one
 189 #       of them.
 190 # 4. world stage [WMAKE]
 191 #       This stage actually builds the world.
 192 # 5. install stage (optional) [IMAKE]
 193 #       This stage installs a previously built world.
 194 #
 195 # In all cases we must carefully adjust the environment so the proper
 196 # tools and header files are used.
 197 #
 198 # NOTE: The M4 environment variable is used by the [f]lex binary to
 199 #       override the location of the 'm4' binary.  The override is
 200 #       needed for certain buildworld version transitions, specifically
 201 #       past a certain point in 3.3 because the older /usr/bin/m4 will
 202 #       generate output that will blow up the newer [f]lex/yacc/bison
 203 #       utilities.
 204 #
 205
 206 # bootstrap-tool stage
 207 #
 208 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 209                 OBJTREE=${OBJTREE} \
 210                 DESTDIR=${BTOOLSDEST} \
 211                 LC_ALL=C \
 212                 _SHLIBDIRPREFIX=${BTOOLSDEST} \
 213                 PATH=${BTOOLSPATH}:${PATH} \
 214                 M4=${BTOOLSDEST}/usr/bin/m4 \
 215                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 216
 217 BMAKE=          ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
 218                 -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 219                 -DNO_WERROR -DNO_NLS -DSYSBUILD
 220
 221 # build-tool stage
 222 #
 223 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 224                 OBJTREE=${OBJTREE} \
 225                 DESTDIR= \
 226                 LC_ALL=C \
 227                 PATH=${BTOOLSPATH}:${PATH} \
 228                 M4=${BTOOLSDEST}/usr/bin/m4 \
 229                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 230
 231 TMAKE=          ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
 232                 -DNOSHARED -DSYSBUILD
 233
 234 # cross-tool stage
 235 #
 236 # note: TOOLS_PREFIX points to the obj root holding the cross
 237 #       compiler binaries, while USRDATA_PREFIX points to the obj root
 238 #       holding the target environment (and also determines where cross-built
 239 #       libraries, crt*.o, and include files are installed).
 240 #
 241 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
 242                 OBJTREE=${OBJTREE} \
 243                 DESTDIR=${CTOOLSDEST} \
 244                 LC_ALL=C \
 245                 _SHLIBDIRPREFIX=${CTOOLSDEST} \
 246                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 247                 TOOLS_PREFIX=${CTOOLSDEST} \
 248                 USRDATA_PREFIX=${WORLDDEST} \
 249                 SELECT_LINKER=${WORLD_LDVER} \
 250                 M4=${BTOOLSDEST}/usr/bin/m4 \
 251                 PATH=${BTOOLSPATH}:${PATH}
 252
 253 XMAKE=          ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \
 254                 -DBOOTSTRAPPING -DNOMAN -DNOSHARED -DSYSBUILD
 255
 256 # world stage, note the strict path and note that TOOLS_PREFIX is left
 257 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
 258 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
 259 # for both binary and library paths, even though it is being compiled to
 260 # WORLDDEST.  None of the programs in the world stage are ever actually
 261 # executed during the buildworld/installworld.
 262 #
 263 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
 264                 OBJTREE=${OBJTREE} \
 265                 MACHINE_ARCH=${TARGET_ARCH} \
 266                 MACHINE=${TARGET} \
 267                 MACHINE_PLATFORM=${TARGET_PLATFORM} \
 268                 LC_ALL=C \
 269                 OBJFORMAT_PATH=${CTOOLSDEST} \
 270                 HOST_CCVER=${HOST_CCVER} \
 271                 CCVER=${WORLD_CCVER} \
 272                 LDVER=${WORLD_LDVER} \
 273                 BINUTILSVER=${WORLD_BINUTILSVER}
 274
 275 WMAKEENV=       ${CROSSENV} \
 276                 WORLDBUILD=1 \
 277                 DESTDIR=${WORLDDEST} \
 278                 _SHLIBDIRPREFIX=${WORLDDEST} \
 279                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 280                 M4=${BTOOLSDEST}/usr/bin/m4 \
 281                 PATH=${STRICTTMPPATH}
 282
 283 WMAKE=          ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD
 284
 285 # install stage
 286 #
 287 IMAKEENV=       ${CROSSENV} \
 288                 PATH=${STRICTTMPPATH}
 289 IMAKE=          ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD
 290
 291 # kernel stage
 292 #
 293 KMAKEENV=       ${WMAKEENV}
 294
 295 # buildworld
 296 #
 297 # Attempt to rebuild the entire system, with reasonable chance of
 298 # success, regardless of how old your existing system is.
 299 #
 300 _worldtmp: _cleantmp _mtreetmp
 301 .ORDER: _cleantmp _mtreetmp
 302
 303 _cleantmp:
 304 .if !defined(NOCLEAN)
 305         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 306 .else
 307         # XXX - These two can depend on any header file.
 308         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 309         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 310 .endif
 311
 312 _mtreetmp:
 313         @echo
 314         @echo "--------------------------------------------------------------"
 315         @echo ">>> Rebuilding the temporary build tree"
 316         @echo "--------------------------------------------------------------"
 317         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 318 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
 319         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
 320                 -p ${_dir}/  > /dev/null
 321         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
 322                 -p ${_dir}/usr > /dev/null
 323 .endfor
 324         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
 325                 -p ${WORLDDEST}/usr/include > /dev/null
 326         ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
 327
 328 _bwinit:
 329         @echo "--------------------------------------------------------------"
 330         @echo ">>> starting buildworld target"
 331         @echo "--------------------------------------------------------------"
 332 _bootstrap-tools:
 333         @echo
 334         @echo "--------------------------------------------------------------"
 335         @echo ">>> stage 1: bootstrap tools"
 336         @echo "--------------------------------------------------------------"
 337         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 338 _cleanobj:
 339         @echo
 340         @echo "--------------------------------------------------------------"
 341         @echo ">>> stage 2a: cleaning up the object tree"
 342         @echo "--------------------------------------------------------------"
 343         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 344 _obj:
 345         @echo
 346         @echo "--------------------------------------------------------------"
 347         @echo ">>> stage 2b: rebuilding the object tree"
 348         @echo "--------------------------------------------------------------"
 349         cd ${.CURDIR}; ${WMAKE} par-obj
 350 _build-tools:
 351         @echo
 352         @echo "--------------------------------------------------------------"
 353         @echo ">>> stage 2c: build tools"
 354         @echo "--------------------------------------------------------------"
 355         cd ${.CURDIR}; ${TMAKE} build-tools
 356 _cross-tools:
 357         @echo
 358         @echo "--------------------------------------------------------------"
 359         @echo ">>> stage 3: cross tools"
 360         @echo "--------------------------------------------------------------"
 361         cd ${.CURDIR}; ${XMAKE} cross-tools
 362 _includes:
 363         @echo
 364         @echo "--------------------------------------------------------------"
 365         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
 366         @echo "--------------------------------------------------------------"
 367         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 368 _libraries:
 369         @echo
 370         @echo "--------------------------------------------------------------"
 371         @echo ">>> stage 4b: building libraries"
 372         @echo "--------------------------------------------------------------"
 373         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOMAN -DNOFSCHG libraries
 374 _depend:
 375         @echo
 376         @echo "--------------------------------------------------------------"
 377         @echo ">>> stage 4c: make dependencies"
 378         @echo "--------------------------------------------------------------"
 379         cd ${.CURDIR}; ${WMAKE} par-depend
 380 everything:
 381         @echo
 382         @echo "--------------------------------------------------------------"
 383         @echo ">>> stage 4d: building everything"
 384         @echo "--------------------------------------------------------------"
 385         cd ${.CURDIR}; ${WMAKE} all
 386 _initrd:
 387         @echo
 388         @echo "--------------------------------------------------------------"
 389         @echo ">>> stage 5: building rescue and initrd"
 390         @echo "--------------------------------------------------------------"
 391 .if !defined(NO_INITRD)
 392         cd ${.CURDIR}/initrd; ${WMAKEENV} make all
 393 .endif
 394 _bwdone:
 395         @echo "--------------------------------------------------------------"
 396         @echo ">>> buildworld target complete"
 397         @echo "--------------------------------------------------------------"
 398 _qwinit:
 399         @echo "--------------------------------------------------------------"
 400         @echo ">>> starting quickworld target"
 401         @echo "--------------------------------------------------------------"
 402 _qwdone:
 403         @echo "--------------------------------------------------------------"
 404         @echo ">>> quickworld target complete"
 405         @echo "--------------------------------------------------------------"
 406 _iwinit:
 407         @echo "--------------------------------------------------------------"
 408         @echo ">>> starting installworld target"
 409         @echo "--------------------------------------------------------------"
 410
 411 # note: buildworld no longer depends on _cleanobj because we rm -rf the
 412 # entire object tree and built the bootstrap tools in a different location.
 413 #
 414 # buildworld    - build everything from scratch
 415 # quickworld    - skip the bootstrap, build, and cross-build steps
 416 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
 417 #
 418 # note: we include _obj in realquickworld to prevent accidental creation
 419 # of files in /usr/src.
 420
 421 WMAKE_TGTS=
 422 .if !defined(SUBDIR_OVERRIDE)
 423 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 424 .endif
 425 WMAKE_TGTS+=    _obj _build-tools
 426 .if !defined(SUBDIR_OVERRIDE)
 427 WMAKE_TGTS+=    _cross-tools
 428 .endif
 429 WMAKE_TGTS+=    _includes _libraries _depend everything _initrd
 430
 431 .if defined(WMAKE_TGTS_OVERRIDE)
 432 SUBDIR=
 433 WMAKE_TGTS=     ${WMAKE_TGTS_OVERRIDE}
 434 .endif
 435
 436 QMAKE_TGTS=     _mtreetmp _obj _includes _libraries _depend everything _initrd
 437
 438 buildworld: _bwinit ${WMAKE_TGTS} _bwdone
 439
 440 quickworld: _qwinit ${QMAKE_TGTS} _qwdone
 441
 442 realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone
 443
 444 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
 445
 446 GENLOGDIR=      /usr/obj${.CURDIR}
 447 .ORDER: build-all install-all
 448
 449 # build-all
 450 #
 451 # build
 452 build-all:
 453         @echo "Building world, log file in ${GENLOGDIR}/bw.out"
 454         @mkdir -p ${GENLOGDIR}
 455         @(cd ${.CURDIR}; ${MAKE} -j `sysctl -n hw.ncpu` buildworld > ${GENLOGDIR}/bw.out 2>&1)
 456         @sync
 457         @echo "Building kernel, log file in ${GENLOGDIR}/bk.out"
 458         @(cd ${.CURDIR}; ${MAKE} -j `sysctl -n hw.ncpu` buildkernel > ${GENLOGDIR}/bk.out 2>&1)
 459         @echo "build-all completed ok"
 460         @sync
 461
 462 install-all:
 463         @echo "Installing kernel, log file in ${GENLOGDIR}/bk.out"
 464         @mkdir -p ${GENLOGDIR}
 465         @(cd ${.CURDIR}; ${MAKE} -j 1 installkernel >> ${GENLOGDIR}/bk.out 2>&1)
 466         @sync
 467         @echo "Installing world, log file in ${GENLOGDIR}/bw.out"
 468         @(cd ${.CURDIR}; ${MAKE} -j 1 installworld >> ${GENLOGDIR}/bw.out 2>&1)
 469         @sync
 470         @echo "Upgrading world"
 471         @(cd ${.CURDIR}; ${MAKE} -j 1 upgrade >> ${GENLOGDIR}/bw.out 2>&1)
 472         @sync
 473         @echo "install-all completed ok.  reboot recommended and after that, "
 474         @echo "when doing a major upgrade, 'pkg upgrade -f' after rebooting"
 475
 476 .ORDER: _bwinit ${WMAKE_TGTS} _bwdone
 477 .ORDER: _obj _includes
 478 .ORDER: _qwinit _mtreetmp _obj
 479 .ORDER: installcheck backupworld-auto
 480 .ORDER: everything _qwdone
 481
 482
 483 # installcheck
 484 #
 485 # Checks to be sure system is ready for installworld
 486 #
 487 installcheck: _iwinit
 488 .if !defined(OVERRIDE_CHECKS)
 489 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
 490         @case `uname -r` in \
 491             1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) \
 492                 echo "You must upgrade your kernel to at least 1.5.4" \
 493                      "and reboot before you can safely installworld," \
 494                      "due to libc/system call ABI changes."; \
 495                 /usr/bin/false; \
 496         esac
 497         @case `uname -r` in \
 498             1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) \
 499                 echo "The system is too old for a normal installworld," \
 500                      "you need to use 'installworld-force'."; \
 501                 /usr/bin/false; \
 502         esac
 503 .endif
 504 .endif
 505
 506 # installworld
 507 #
 508 # Backs up the current world if ${AUTO_BACKUP} is writable.
 509 # Installs everything compiled by a 'buildworld'.
 510 #
 511 installworld: installcheck
 512 .if !defined(NO_BACKUP)
 513         -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
 514         @cd ${.CURDIR}; \
 515             (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
 516              ${IMAKE} backupworld-auto) || \
 517             echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
 518 .endif
 519         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 520         ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc \
 521             ${DESTDIR}/etc/upgrade/
 522         cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL os-release
 523 .if !defined(NO_INITRD)
 524         cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL initrd
 525 .endif
 526         sync
 527         @echo "--------------------------------------------------------------"
 528         @echo ">>> installworld target complete"
 529         @echo "--------------------------------------------------------------"
 530
 531 os-release:
 532         @echo "NAME=DragonFly" > ${DESTDIR}/etc/os-release
 533         @echo "VERSION=${OSREL}-SYNTH" >> ${DESTDIR}/etc/os-release
 534         @echo "VERSION_ID=${OSREL}" >> ${DESTDIR}/etc/os-release
 535         @echo "ID=dragonfly" >> ${DESTDIR}/etc/os-release
 536         @echo "ANSI_COLOR=\"0;32\"" >> ${DESTDIR}/etc/os-release
 537         @echo "PRETTY_NAME=\"DragonFlyBSD ${OSREL}-SYNTH\"" >> ${DESTDIR}/etc/os-release
 538         @echo "CPE_NAME=\"cpe:/o:dragonflybsd:dragonfly:${OSREL}\"" >> ${DESTDIR}/etc/os-release
 539         @echo "SUPPORT_URL=\"http://chat.efnet.org:9090/?nick=dflynick&channels=%23dragonflybsd&Login=Login\"" >> ${DESTDIR}/etc/os-release
 540         @echo "HOME_URL=\"https://www.dragonflybsd.org/\"" >> ${DESTDIR}/etc/os-release
 541         @echo "BUG_REPORT_URL=\"https://bugs.dragonflybsd.org/\"" >> ${DESTDIR}/etc/os-release
 542         @echo "MACHINE_ARCH=${MACHINE_ARCH}" >> ${DESTDIR}/etc/os-release
 543         @echo "MACHINE=${MACHINE}" >> ${DESTDIR}/etc/os-release
 544         @echo "DFLYVERSION=${DFLYVERSION}" >> ${DESTDIR}/etc/os-release
 545
 546 installworld-force:
 547         @echo "Doing a forced installworld.  This will install to a temporary directory,"
 548         @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/"
 549         @echo "and finally will issue a normal installworld."
 550         @echo
 551         @echo "Starting in 5 seconds.  ^C to abort."
 552         @echo
 553         sleep 1
 554         rm -rf /usr/obj/temp > /dev/null 2>&1 || chflags -R noschg /usr/obj/temp
 555         rm -rf /usr/obj/temp
 556         mkdir -p /usr/obj/temp/cpdup/bin
 557         (cd ${.CURDIR}/bin/cpdup; \
 558                 make clean && \
 559                 make obj && \
 560                 make clean && \
 561                 make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE)
 562         @echo "XXXXXXXXX Installing to temporary XXXXXXXXX"
 563         @sleep 1
 564         (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1)
 565         @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX"
 566         @sleep 1
 567         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin
 568         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin
 569         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib
 570         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin
 571         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin
 572         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib
 573         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec
 574         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec
 575         @echo "XXXXXXXXX Doing final installworld XXXXXXXX"
 576         sleep 5
 577         (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE)
 578         (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE)
 579 .if !defined(NO_INITRD)
 580         (cd ${.CURDIR}; ${MAKE} initrd)
 581 .endif
 582
 583 # reinstall
 584 #
 585 # If you have a build server, you can NFS mount the source and obj directories
 586 # and do a 'make reinstall' on the *client* to install new binaries from the
 587 # most recent server build.
 588 #
 589 reinstall:
 590         @echo "--------------------------------------------------------------"
 591         @echo ">>> Making hierarchy"
 592         @echo "--------------------------------------------------------------"
 593         cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
 594         @echo
 595         @echo "--------------------------------------------------------------"
 596         @echo ">>> Installing everything"
 597         @echo "--------------------------------------------------------------"
 598         cd ${.CURDIR}; make -f Makefile.inc1 install
 599
 600 # initrd
 601 #
 602 # Install the rescue tools and the initrd image built by 'buildworld'.
 603 #
 604 initrd: .PHONY
 605         (cd ${.CURDIR}/initrd; ${IMAKEENV} make install)
 606
 607
 608 # buildkernel, nativekernel, quickkernel, realquickkernel, and installkernel
 609 #
 610 # Which kernels to build and/or install is specified by setting
 611 # KERNCONF. If not defined an X86_64_GENERIC kernel is built/installed.
 612 # Only the existing (depending TARGET) config files are used
 613 # for building kernels and only the first of these is designated
 614 # as the one being installed.
 615 #
 616 # You can specify INSTALLSTRIPPED=1 if you wish the installed
 617 # kernel and modules to be stripped of its debug info (required
 618 # symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
 619 # if you only want to strip the modules of their debug info.  These
 620 # only apply if you have DEBUG=-g in your kernel config or make line.
 621 #
 622 # Note that we have to use TARGET instead of TARGET_ARCH when
 623 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 624 # be set to cross-build, we have to make sure TARGET is set
 625 # properly.
 626
 627 .if !defined(KERNCONF) && defined(KERNEL)
 628 KERNCONF=       ${KERNEL}
 629 KERNWARN=       yes
 630 .else
 631 # XXX makeshift fix to build the right kernel for the (target) architecture
 632 # We should configure this in the platform files somehow
 633 .if ${TARGET_ARCH} == "x86_64"
 634 KERNCONF?=      X86_64_GENERIC
 635 .endif
 636 .endif
 637 INSTKERNNAME?=  kernel
 638
 639 KRNLSRCDIR=     ${.CURDIR}/sys
 640 KRNLCONFDIR=    ${KRNLSRCDIR}/config
 641 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 642 KERNCONFDIR?=   ${KRNLCONFDIR}
 643
 644 BUILDKERNELS=
 645 INSTALLKERNEL=
 646 .for _kernel in ${KERNCONF}
 647 .if exists(${KERNCONFDIR}/${_kernel})
 648 BUILDKERNELS+=  ${_kernel}
 649 .if empty(INSTALLKERNEL)
 650 INSTALLKERNEL= ${_kernel}
 651 .endif
 652 .endif
 653 .endfor
 654
 655 # kernel version numbers survive rm -rf
 656 #
 657 .for _kernel in ${BUILDKERNELS}
 658 .if exists(${KRNLOBJDIR}/${_kernel}/version)
 659 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
 660 .endif
 661 .endfor
 662
 663 # buildkernel
 664 #
 665 # Builds all kernels defined by BUILDKERNELS.
 666 #
 667 bk_tools:
 668         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 669             echo "You must buildworld before buildkernel.  If you wish"; \
 670             echo "to build a kernel using native tools, config it manually"; \
 671             echo "or use the nativekernel target if you are in a rush"; \
 672             /usr/bin/false; \
 673         fi
 674
 675 maybe_bk_tools:
 676 .for _kernel in ${BUILDKERNELS}
 677         @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 678             if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 679                 echo "The kernel was build using buildworld tools which no" ; \
 680                 echo "longer appear to exist, (real)quickkernel failed!" ; \
 681                 /usr/bin/false; \
 682             fi; \
 683         fi
 684 .endfor
 685
 686 bk_build_list:
 687 .if empty(BUILDKERNELS)
 688         @echo ">>> ERROR: Missing kernel configuration file(s)."
 689         @echo ">>> ${KERNCONF} not found in ${KERNCONFDIR}."
 690         @false
 691 .endif
 692
 693 bk_kernwarn:
 694 .if defined(KERNWARN)
 695         @echo "--------------------------------------------------------------"
 696         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 697         @echo "--------------------------------------------------------------"
 698         @sleep 3
 699 .endif
 700         @echo
 701
 702 # The buildkernel target rebuilds the specified kernels from scratch
 703 # using the crossbuild tools generated by the last buildworld.  It is
 704 # the safest (but also the most time consuming) way to build a new kernel.
 705 #
 706 buildkernel:    bk_tools bk_build_list bk_kernwarn
 707 .for _kernel in ${BUILDKERNELS}
 708         @echo "--------------------------------------------------------------"
 709         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 710         @echo "--------------------------------------------------------------"
 711         @echo "===> ${_kernel}"
 712 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 713         rm -rf ${KRNLOBJDIR}/${_kernel}
 714 .else
 715         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 716                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
 717                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 718 .endif
 719         mkdir -p ${KRNLOBJDIR}
 720 .if !defined(NO_KERNELCONFIG)
 721         cd ${KRNLCONFDIR}; \
 722                 PATH=${STRICTTMPPATH} \
 723                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 724                         ${KERNCONFDIR}/${_kernel}
 725 .endif
 726 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 727         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 728 .endif
 729         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
 730 .if !defined(NO_KERNELDEPEND)
 731         cd ${KRNLOBJDIR}/${_kernel}; \
 732             ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
 733 .endif
 734         cd ${KRNLOBJDIR}/${_kernel}; \
 735             ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
 736         @echo "--------------------------------------------------------------"
 737         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 738         @echo "--------------------------------------------------------------"
 739 .endfor
 740
 741 # The nativekernel target rebuilds the specified kernels from scratch
 742 # using the system's standard compiler rather than using the crossbuild
 743 # tools generated by the last buildworld.  This is fairly safe if your
 744 # system is reasonable up-to-date.
 745 #
 746 nativekernel:   bk_build_list bk_kernwarn
 747 .for _kernel in ${BUILDKERNELS}
 748         @echo "--------------------------------------------------------------"
 749         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 750         @echo "--------------------------------------------------------------"
 751         @echo "===> ${_kernel}"
 752 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 753         rm -rf ${KRNLOBJDIR}/${_kernel}
 754 .else
 755         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
 756                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
 757                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 758 .endif
 759         mkdir -p ${KRNLOBJDIR}
 760 .if !defined(NO_KERNELCONFIG)
 761         cd ${KRNLCONFDIR}; \
 762                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 763                         ${KERNCONFDIR}/${_kernel}
 764 .endif
 765 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 766         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 767 .endif
 768         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
 769 .if !defined(NO_KERNELDEPEND)
 770         cd ${KRNLOBJDIR}/${_kernel}; \
 771             make KERNEL=${INSTKERNNAME} depend
 772 .endif
 773         cd ${KRNLOBJDIR}/${_kernel}; \
 774             make KERNEL=${INSTKERNNAME} all
 775         @echo "--------------------------------------------------------------"
 776         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 777         @echo "--------------------------------------------------------------"
 778 .endfor
 779
 780 # The (real)quickkernel target rebuilds the specified kernels as quickly
 781 # as possible.  It will use the native tools or the buildworld cross tools
 782 # based on whether the kernel was originally generated via buildkernel or
 783 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt.
 784 # realquickkernel skips the depend step (analogous to realquickworld).
 785 #
 786 quickkernel realquickkernel:    maybe_bk_tools bk_build_list bk_kernwarn
 787 .for _kernel in ${BUILDKERNELS}
 788         @echo "--------------------------------------------------------------"
 789         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 790         @echo "--------------------------------------------------------------"
 791         @echo "===> ${_kernel}"
 792 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 793 .if !defined(NO_KERNELCONFIG)
 794         cd ${KRNLCONFDIR}; \
 795                 PATH=${STRICTTMPPATH} \
 796                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 797                         ${KERNCONFDIR}/${_kernel}
 798 .endif
 799 .if !defined(NO_KERNELDEPEND) && !make(realquickkernel)
 800         cd ${KRNLOBJDIR}/${_kernel}; \
 801             ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
 802 .endif
 803         cd ${KRNLOBJDIR}/${_kernel}; \
 804             ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
 805 .else
 806 .if !defined(NO_KERNELCONFIG)
 807         cd ${KRNLCONFDIR}; \
 808             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 809                 ${KERNCONFDIR}/${_kernel}
 810 .endif
 811 .if !defined(NO_KERNELDEPEND) && !make(realquickkernel)
 812         cd ${KRNLOBJDIR}/${_kernel}; \
 813             make KERNEL=${INSTKERNNAME} depend
 814 .endif
 815         cd ${KRNLOBJDIR}/${_kernel}; \
 816             make KERNEL=${INSTKERNNAME} all
 817 .endif
 818         @echo "--------------------------------------------------------------"
 819         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 820         @echo "--------------------------------------------------------------"
 821 .endfor
 822
 823
 824 # installkernel
 825 #
 826 # Install the kernel defined by INSTALLKERNEL
 827 #
 828 installkernel reinstallkernel:
 829         @echo "--------------------------------------------------------------"
 830         @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
 831         @echo "--------------------------------------------------------------"
 832 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
 833         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 834             ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 835 .else
 836         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 837             make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 838 .endif
 839         @echo "--------------------------------------------------------------"
 840         @echo ">>> Kernel install for ${INSTALLKERNEL} completed on `LC_ALL=C date`"
 841         @echo "--------------------------------------------------------------"
 842
 843
 844 # ------------------------------------------------------------------------
 845 #
 846 # From here onwards are utility targets used by the 'make world' and
 847 # related targets.  If your 'world' breaks, you may like to try to fix
 848 # the problem and manually run the following targets to attempt to
 849 # complete the build.  Beware, this is *not* guaranteed to work, you
 850 # need to have a pretty good grip on the current state of the system
 851 # to attempt to manually finish it.  If in doubt, 'make world' again.
 852 #
 853
 854 # bootstrap-tools: Build all tools required to build all tools.  Note that
 855 # order is important in a number of cases and also note that the bootstrap
 856 # and build tools stages have access to earlier binaries they themselves
 857 # had generated.
 858 #
 859 # [x]install:   dependencies on various new install features
 860 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 861 #               envs are not compatible with older objformat binaries.
 862 #
 863
 864 # BSTRAPDIRS1 - must be built in strict order, no parallelism
 865 #
 866 # order is very important. yacc before m4 before flex.  flex exec's m4,
 867 # m4's parser file needs the latest byacc (insanity!).
 868 #
 869 BSTRAPDIRS1= \
 870         bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
 871         bin/test bin/cat bin/ln bin/mv bin/expr bin/sh \
 872         bin/hostname bin/kill \
 873         usr.bin/yacc usr.bin/m4 usr.bin/localedef \
 874         usr.bin/uudecode usr.bin/xinstall \
 875         usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
 876         usr.bin/find usr.bin/flex
 877
 878 # BSTRAPDIRS2 - may built in parallel
 879 #
 880 BSTRAPDIRS2= \
 881         usr.bin/sed usr.bin/uname usr.bin/touch \
 882         usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
 883         usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
 884         usr.bin/gencat usr.bin/chflags \
 885         usr.bin/uuencode usr.bin/cap_mkdb usr.bin/true usr.bin/false \
 886         usr.bin/cmp usr.bin/xargs usr.bin/env usr.bin/dirname \
 887         usr.bin/tail usr.bin/unifdef \
 888         usr.sbin/chown usr.sbin/mtree usr.sbin/config \
 889         usr.sbin/tzsetup usr.sbin/zic usr.sbin/pwd_mkdb \
 890         gnu/usr.bin/grep usr.bin/sort usr.bin/gzip \
 891         usr.bin/mkcsmapper usr.bin/mkesdb usr.bin/crunch
 892
 893 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
 894         touch ${BTOOLSDEST}/.bootstrap_done
 895
 896 bootstrap-tools-before:
 897         ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
 898
 899 bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
 900
 901 bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
 902
 903 .ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
 904
 905 .ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
 906
 907 .for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
 908 bstrap-${_tool}!
 909         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
 910                 cd ${.CURDIR}/${_tool}; \
 911                 make DIRPRFX=${_tool}/ obj && \
 912                 make DIRPRFX=${_tool}/ depend && \
 913                 make DIRPRFX=${_tool}/ all && \
 914                 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 915 .endfor
 916
 917 # build-tools: Build special purpose build tools.
 918 #
 919 # XXX we may be able to remove or consolidate this into bootstrap-tools
 920 # now that we have the native helper (.nx/.no) infrastructure.
 921 #
 922 # XXX we should separate this into new Makefile.inc2.
 923 # Just to prepare for reduction of ORDER: that slows down parallel crossworld.
 924
 925 # Make sure Makefile.inc1 logic is intact.
 926 .if !defined(WORLD_ALTCOMPILER)
 927 .warning undefined WORLD_ALTCOMPILER
 928 .endif
 929
 930 # gcc80 is now the default compiler.  See sys.mk for WORLD_ALTCOMPILER default
 931 # and this file for WORLD_CCVER.
 932 #
 933 _gcc47_cross= gnu/usr.bin/cc47
 934 _gcc80_cross= gnu/usr.bin/cc80
 935 _gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc
 936
 937 .if !defined(NO_ALTCOMPILER)
 938 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
 939 _altcompiler_cross+= ${_gcc47_cross}
 940 . endif
 941 .endif
 942
 943 _basecompiler_cross= ${_gcc80_cross}
 944
 945 _custom_cross= libexec/customcc
 946 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
 947
 948 build-tools: build-tools-targets
 949         touch ${BTOOLSDEST}/.build_done
 950
 951 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
 952
 953 #
 954 # cross-tools: Build cross-building tools
 955 #
 956
 957 CTOOLSDIRS= usr.bin/objformat
 958
 959 CTOOLSDIRS+=    ${_binutils} \
 960                 ${_gcc_common_cross} \
 961                 ${_altcompiler_cross} \
 962                 ${_basecompiler_cross} ${_custom_cross}
 963
 964 cross-tools: cross-tools-targets
 965         touch ${CTOOLSDEST}/.cross_done
 966
 967 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
 968
 969 .for _tool in ${CTOOLSDIRS}
 970 ctools-${_tool}!
 971         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
 972                 cd ${.CURDIR}/${_tool}; \
 973                 make DIRPRFX=${_tool}/ obj && \
 974                 make DIRPRFX=${_tool}/ depend && \
 975                 make DIRPRFX=${_tool}/ all && \
 976                 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
 977 .endfor
 978
 979 #
 980 # hierarchy - ensure that all the needed directories are present
 981 #
 982 hierarchy:
 983         cd ${.CURDIR}/etc;              make distrib-dirs
 984
 985 #
 986 # libraries - build all libraries, and install them under ${DESTDIR}.
 987 #
 988 # The list of libraries with dependents (${_prebuild_libs}) and their
 989 # interdependencies (__L) are built automatically by the
 990 # ${.CURDIR}/tools/make_libdeps.sh script.
 991 #
 992 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
 993 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
 994 #
 995 libraries:
 996         cd ${.CURDIR}; \
 997             HOST_CCVER=${HOST_CCVER} CCVER=gcc80 \
 998                 make -f Makefile.inc1 _startup_libs80 -DSYSBUILD -DLIBGCC_ONLY;
 999 .if !defined(NO_ALTCOMPILER)
1000 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
1001         cd ${.CURDIR}; \
1002             HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
1003                 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD -DLIBGCC_ONLY;
1004 . endif
1005 .endif
1006         cd ${.CURDIR}; \
1007             make -f Makefile.inc1 _startup_libs -DSYSBUILD && \
1008             make -f Makefile.inc1 _prebuild_libs -DSYSBUILD && \
1009             make -f Makefile.inc1 _generic_libs -DSYSBUILD && \
1010             touch ${WORLDDEST}/.libraries_done
1011
1012 # These dependencies are not automatically generated:
1013 #
1014 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
1015 # shared libraries for ELF.  The target for _startup_libsXX is
1016 # specifically built using gccXX.
1017 #
1018 _startup_libs47=        gnu/usr.bin/cc47/cc_prep \
1019                         gnu/usr.bin/cc47/cc_tools \
1020                         gnu/lib/gcc47/csu \
1021                         gnu/lib/gcc47/libgcc \
1022                         gnu/lib/gcc47/libgcc_eh \
1023                         gnu/lib/gcc47/libgcc_pic
1024
1025 _startup_libs80=        gnu/usr.bin/cc80/cc_prep \
1026                         gnu/usr.bin/cc80/cc_tools \
1027                         gnu/lib/gcc80/csu \
1028                         gnu/lib/gcc80/libgcc \
1029                         gnu/lib/gcc80/libgcc_eh \
1030                         gnu/lib/gcc80/libgcc_pic
1031
1032 .if !defined(NO_ALTCOMPILER)
1033 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
1034 _startup_libs_alt+=     _startup_libs47
1035 . endif
1036 .endif
1037
1038 _startup_libs_base=     _startup_libs80
1039
1040 _startup_libs=          lib/csu lib/libc lib/libc_rtld
1041 lib/libc__L: lib/csu__L
1042
1043 _prebuild_libs=         lib/libbz2 lib/liblzma lib/libz lib/libzstd
1044 _prebuild_libs+=        lib/libutil
1045
1046 _prebuild_libs+=        lib/libpcap
1047
1048 _generic_libs=  gnu/lib
1049
1050 _prebuild_libs+= lib/libcrypt lib/libncurses/libncurses
1051
1052 _generic_libs+= lib
1053
1054 _prebuild_libs+=        lib/librecrypto lib/libressl
1055 lib/libressl__L: lib/librecrypto__L
1056
1057 _prebuild_libs+=       lib/libldns
1058 lib/libldns__L: lib/librecrypto__L
1059
1060 _prebuild_libs+= lib/libsbuf lib/libm \
1061                 lib/libpam/libpam lib/libypclnt lib/lib${THREAD_LIB} \
1062                 lib/libpthread lib/libprop
1063
1064 _generic_libs+= usr.bin/flex/lib
1065
1066 .for _alib in ${_startup_libs_alt} ${_startup_libs_base}
1067 __startup_alibs+= ${${_alib}}
1068 .endfor
1069
1070 .for _lib in ${__startup_alibs} \
1071                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
1072 ${_lib}__L: .PHONY
1073 .if exists(${.CURDIR}/${_lib})
1074         @${ECHODIR} "===> ${_lib}"; \
1075                 cd ${.CURDIR}/${_lib}; \
1076                 echo "STEP DEP ${_lib}" && \
1077                 make DIRPRFX=${_lib}/ depend && \
1078                 echo "STEP ALL ${_lib}" && \
1079                 make DIRPRFX=${_lib}/ all && \
1080                 echo "STEP INSTALL ${_lib}" && \
1081                 make DIRPRFX=${_lib}/ install && \
1082                 echo "STEP DONE ${_lib}";
1083 .else
1084 .warning missing ${.CURDIR}/${_lib} directory.
1085 .endif
1086 .endfor
1087
1088 _startup_libs: ${_startup_libs:S/$/__L/}
1089 .for _alib in ${_startup_libs_alt} ${_startup_libs_base}
1090 ${_alib}: ${${_alib}:C/$/__L/}
1091 .endfor
1092 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
1093 _generic_libs: ${_generic_libs:S/$/__L/}
1094
1095 # library targets must be ordered because there are inter-library
1096 # races (e.g. generation of tconfig.h)
1097 #
1098 .for _alib in ${_startup_libs_base} ${_startup_libs_alt}
1099 .ORDER: ${${_alib}:C/$/__L/}
1100 .endfor
1101
1102 # uncomment if there are missing dependencies
1103 .if 0
1104 .ORDER: ${_prebuild_libs:S/$/__L/}
1105 # we can disable this one, no lib/* depend on libstdc++
1106 .ORDER: ${_generic_libs:S/$/__L/}
1107 .endif
1108
1109 .for __target in clean cleandepend cleandir obj depend includes
1110 .for entry in ${SUBDIR}
1111 ${entry}.${__target}__D: .PHONY
1112         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1113                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1114                 edir=${entry}.${MACHINE_ARCH}; \
1115                 cd ${.CURDIR}/$${edir}; \
1116         else \
1117                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1118                 edir=${entry}; \
1119                 cd ${.CURDIR}/$${edir}; \
1120         fi; \
1121         make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1122 .endfor
1123 par-${__target}: ${SUBDIR:C/$/.${__target}__D/}
1124 .ORDER: ${SUBDIR:C/$/.${__target}__D/}
1125 .endfor
1126 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1127
1128 # The wmake target is used by /usr/bin/wmake to run make in a
1129 # world build environment.
1130 #
1131 wmake:
1132         @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD'
1133
1134 wmakeenv:
1135         @echo '${WMAKEENV} /bin/sh'
1136
1137 bmake:
1138         @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD'
1139
1140 bmakeenv:
1141         @echo '${BMAKEENV} /bin/sh'
1142
1143 tmake:
1144         @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD'
1145
1146 tmakeenv:
1147         @echo '${TMAKEENV} /bin/sh'
1148
1149 xmake:
1150         @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD'
1151
1152 xmakeenv:
1153         @echo '${XMAKEENV} /bin/sh'
1154
1155 .if !defined(NO_BACKUP)
1156 backupworld: backup-clean
1157         @mkdir -p ${WORLD_BACKUP}
1158 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1159      exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1160      exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1161         tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1162                 --options gzip:compression-level=1 \
1163                 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1164 .endif
1165
1166 backupworld-auto:
1167         rm -f ${AUTO_BACKUP}/binaries.tar.gz
1168         @mkdir -p ${AUTO_BACKUP}
1169 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1170      exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1171      exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1172         /usr/bin/tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1173                 --options gzip:compression-level=1 \
1174                 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1175 .endif
1176
1177 backup-auto-clean:
1178         rm -f ${AUTO_BACKUP}/binaries.tar.gz
1179
1180 backup-clean:
1181         rm -f ${WORLD_BACKUP}/binaries.tar.gz
1182
1183 restoreworld:
1184 .if !exists(${WORLD_BACKUP}/binaries.tar.gz)
1185         @echo "There does not seem to be a valid archive present."
1186 .else
1187         @echo "Restoring system binaries from manual backup archive..."
1188         @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1189                 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1190                 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1191         tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1192 .endif
1193
1194 restoreworld-auto:
1195 .if !exists(${AUTO_BACKUP}/binaries.tar.gz)
1196         @echo "There does not seem to be a valid archive present."
1197 .else
1198         @echo "Restoring system binaries from auto-backup archive..."
1199         @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1200                 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1201                 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1202         tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1203 .endif
1204 .endif
1205
1206 # Take advantage of bmake error response
1207 #
1208 MAKE_PRINT_VAR_ON_ERROR= \
1209         .CURDIR \
1210         .OBJDIR \
1211         .TARGETS \
1212         .ERROR_TARGET \
1213         .MAKE.LEVEL \
1214         .MAKE.MODE \
1215         PATH \
1216         LD_LIBRARY_PATH \
1217         MACHINE_ARCH \
1218         MACHINE \
1219         MAKEFILE \
1220         MAKESYSPATH \
1221         MAKEOBJDIRPREFIX \
1222         WORLD_ALTCOMPILER \
1223         DESTDIR \
1224         SHELL .SHELL
1225 .if ${.MAKE.LEVEL} > 0
1226 MAKE_PRINT_VAR_ON_ERROR+= .MAKE.MAKEFILES .PATH
1227 .endif
1228
1229 .include <bsd.subdir.mk>