3 # Copyright (c) 1990 The Regents of the University of California.
6 # Written and contributed by W. Jolitz 12/90
8 # Redistribution and use in source and binary forms are permitted provided
9 # that: (1) source distributions retain this entire copyright notice and
10 # comment, and (2) distributions including binaries display the following
11 # acknowledgement: ``This product includes software developed by the
12 # University of California, Berkeley and its contributors'' in the
13 # documentation or other materials provided with the distribution and in
14 # all advertising materials mentioning features or use of this software.
15 # Neither the name of the University nor the names of its contributors may
16 # be used to endorse or promote products derived from this software without
17 # specific prior written permission.
18 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
19 # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
20 # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
22 # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
23 # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.57 2003/02/10 11:35:53 simokawa Exp $
24 # $DragonFly: src/etc/MAKEDEV,v 1.5 2004/01/15 15:41:23 drhodus Exp $
26 # Device "make" file. Valid arguments:
27 # all makes all known devices, standard number of units (or close)
28 # std standard devices
29 # jail suitable for a jail(8)
30 # local configuration specific devices
31 # mach-4 mach4&lites+devices for Mach's XFree86 distribution
32 # (see http://www.cs.hut.fi/lites.html for more info on LITES)
35 # ast* ATAPI tape drives
36 # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
37 # sa* SCSI Sequential Access Devices
40 # aac* Adaptec FSA RAID controllers
41 # aacd* Adaptec FSA RAID
42 # acd* ATAPI CD-ROM disks
44 # afd* ATAPI floppy disks
46 # cd* SCSI CD-ROM disks
47 # da* SCSI Direct Access Devices
48 # fd* floppy disk drives (3 1/2", 5 1/4")
49 # fla* M-Systems DiskOnChip
50 # idad* Compaq Smart-2 RAID arrays
51 # ips* IBM ServeRAID controller
53 # mcd* Mitsumi CD-ROM disks
54 # md* Memory (or malloc) disk
55 # mlx* Mylex DAC960 RAID controllers
56 # mlxd* Mylex DAC960 RAID disk volumes
57 # pst* Promise SuperTrak RAID disks
58 # scd* Sony CD-ROM disks
62 # vty* virtual console devices for syscons/pcvt/codrv
65 # mse* Logitech and ATI Inport bus mouse
67 # jogdial Sony VAIO Jogdial
68 # sysmouse Mousesystems mouse emulator for syscons
71 # refclock-* serial ports used by xntpd parse refclocks
74 # tty* general purpose serial ports
75 # cua* dialout serial ports
76 # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
77 # cuaA* Specialix SI/XIO dialout ports
78 # ttyD* Digiboard - 16 dialin ports
79 # cuaD* Digiboard - 16 dialout ports
80 # ttyE* Stallion EasyIO (stl) dialin ports
81 # cuaE* Stallion EasyIO (stl) dialout ports
82 # ttyF* Stallion Brumby (stli) dialin ports
83 # cuaF* Stallion Brumby (stli) dialout ports
84 # ttyR* Rocketport dialin ports
85 # cuaR* Rocketport dialout ports
87 # stlN Stallion EasyIO board N dialin and dialout
88 # stliN Stallion Brumby board N dialin and dialout
91 # pty* set of 32 master and slave pseudo terminals
92 # vty* virtual terminals using syscons/pcvt/codrv console
96 # ppi* Parallel port i/o
97 # pps* Pulse per second timing interface
98 # pcfclock* Parallel time sync interface
105 # usb* USB bus control device
106 # ucom* USB serial devices
107 # ugen* generic USB device
108 # uhid* Human Interface Device (HID)
112 # urio* Diamond Rio 500
113 # uscanner* USB scanners
115 # SCSI devices (other than CD-ROM, tape and disk):
116 # ch* SCSI Media-Changer (juke box) driver
117 # pt* Processor Type (HP scanner, as one example)
118 # pass* CAM Passthrough device
119 # ses* SES (SCSI Environmental Services) and
120 # SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
122 # PC-CARD (previously called PCMCIA) support
123 # card* PC-CARD slots
126 # i4b isdnd call control device
127 # i4bctl debugging control device
128 # i4btrc* trace data interface(s), one per passive card
129 # i4btel* telephony interface(s)
130 # i4bteld* telephony dialout interface(s)
131 # i4brbch* raw b channel access device(s)
133 # Special purpose devices:
134 # apm Advanced Power Management BIOS
135 # apmctl APM BIOS control device
137 # crypto crypto interface
139 # tw* xten power controller
140 # snd* various sound cards
141 # pcaudio PCM audio driver
142 # socksys iBCS2 socket system driver
143 # vat VAT compatibility audio driver (requires snd*)
144 # gsc Genius GS-4500 hand scanner
146 # tun* Tunneling IP device
147 # tap* Ethernet Tunneling device
148 # snp* tty snoop devices
149 # spigot Video Spigot video acquisition card
150 # ctx* Cortex-I video acquisition card
151 # meteor* Matrox Meteor video acquisition card (pci)
152 # bktr* Bt848 based video acquisition card (pci)
153 # labpc* National Instrument's Lab-PC and LAB-PC+
154 # perfmon CPU performance-monitoring counters
155 # pci PCI configuration-space access from user mode
156 # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
157 # kbd keyboard devices
158 # elan-mmcr AMD Elan support (e.g. mmap MMCR)
159 # agpgart AGP interface
160 # cfs* Coda Distributed Filesystem
161 # nsmb* SMB/CIFS protocol interface
164 if [ -n "$MAKEDEVPATH" ]; then
171 # Usage: die exitcode msg
177 # Convert integer to partition name
182 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
188 # Convert integer to slice name
200 # Convert disk (type, unit, slice, partition) to minor number
203 echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
206 # Override mknod(2) to add extra handling to it.
208 for i in `IFS=':'; echo $PATH`; do
209 if [ -x "${i}/mknod" ]; then
217 4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";;
218 5) "$mknod" "$@" || die 2 "$mknod $@ failed";;
219 *) die 2 "bad node: mknod $@";;
223 # Convert tape (ctrl, unit, mode, access) to minor number
226 echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
229 # Convert the last character of a tty name to a minor number.
234 a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
235 h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
236 o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
243 # Convert a unit number to a minor number.
246 echo $(((($1 >> 8) << 16) | ($1 % 256)))
249 # For the stallion devices tty[EF]
250 # stallion major letter card iscallout
263 if [ $iscallout -gt 0 ]; then
271 *) die 1 "Invalid stl card number $card";;
274 # make the mem interface for extracting stats & loading microcode.
275 # 0x1000000 + card number
276 mknod staliomem$card c $major 0x0100000$card
278 while [ $port -lt $maxport ]; do
279 minor=$(($minorbase + $card * 1048576 + $port))
280 if [ $port -ge 32 ]; then
281 minor=$(($minor + 65504))
283 unit=$(($card * 64 + $port))
285 mknod ${pref}${letter}$unit c $major $minor $owner
286 mknod ${pref}i${letter}$unit c $major $(($minor + 32)) $owner
287 mknod ${pref}l${letter}$unit c $major $(($minor + 64)) $owner
292 # Raw partition for disks
295 # Compatibility slice for disks
298 # Raw slice for disks
302 disk_umask=037 # allow group operator to read disks
303 tape_umask=017 # allow group operator to read/write tapes
309 sh MAKEDEV std # standard
310 sh MAKEDEV fd0 fd1 # bdev, floppy disk
311 sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk
312 sh MAKEDEV ata # cdev, ATA control
313 sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk
314 sh MAKEDEV ar0 ar1 # bdev, ATA RAID disk
315 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
316 sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk
317 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
318 sh MAKEDEV vn0 # bdev, virtual disk
319 sh MAKEDEV cd0 mcd0 scd0 # bdev, cdrom
320 sh MAKEDEV sa0 wt0 # bdev, tape
321 sh MAKEDEV vty12 # cdev, virtual tty
322 sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
323 sh MAKEDEV pty0 # cdev, pseudo tty
324 sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
325 sh MAKEDEV zs0 # big-Alpha serial tty
326 sh MAKEDEV kbd0 kbd1 # cdev, keyboard
327 sh MAKEDEV mse0 psm0 jogdial sysmouse # cdev, mouse
328 sh MAKEDEV pcaudio speaker snd0 # cdev, noise
329 sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
330 sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
331 sh MAKEDEV iic0 iic1 # cdev, I2C device
332 sh MAKEDEV smb0 smb1 # cdev, SMBus device
333 sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
334 sh MAKEDEV usb1 uhid1 ums1 ulpt1 ugen1 # cdev, USB devices
335 sh MAKEDEV urio0 uscanner0 umodem0 # cdev, USB devices too
336 sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
337 sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
338 sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network
339 sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
340 sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
341 sh MAKEDEV pass4 xpt2 # cdev, CAM
342 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
343 sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
344 sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
345 sh MAKEDEV agpgart # cdev, AGP
346 sh MAKEDEV nsmb0 # cdev, SMB/CIFS
347 sh MAKEDEV crypto # cdev, crypto
348 sh MAKEDEV fw0 fw1 fw2 fw3 fwmem0 # cdev, firewire
351 # a much restricted set of the above, to save precious i-nodes on the
354 sh MAKEDEV std # standard
355 sh MAKEDEV fd0 # bdev, floppy disk
356 sh MAKEDEV da0 # bdev, SCSI disk
357 sh MAKEDEV ad0 # bdev, ATA disk
358 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
359 sh MAKEDEV wd0 # bdev, OLD disk
360 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
361 sh MAKEDEV vn0 # bdev, virtual disk
362 sh MAKEDEV cd0 # bdev, cdrom
363 sh MAKEDEV sa0 # bdev, tape
364 sh MAKEDEV vty2 # cdev, virtual tty
365 sh MAKEDEV cuaa0 # cdev, serial tty
366 sh MAKEDEV pty0 # cdev, pseudo tty
367 sh MAKEDEV ttyd0 # cdev, serial tty
368 sh MAKEDEV zs0 # big-Alpha serial tty
369 sh MAKEDEV kbd0 # cdev, keyboard
370 sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
371 sh MAKEDEV lpt0 # cdev, printer
372 sh MAKEDEV ppi0 # cdev, parallel port
373 sh MAKEDEV iic0 # cdev, I2C device
374 sh MAKEDEV smb0 # cdev, SMBus device
375 sh MAKEDEV ums0 # cdev, USB devices
376 sh MAKEDEV tun0 # cdev, network
377 sh MAKEDEV tap0 # cdev, network
378 sh MAKEDEV ch0 # cdev, miscellaneous
379 sh MAKEDEV apm apmctl card0 # cdev, laptop
380 sh MAKEDEV pass1 xpt1 # cdev, CAM
381 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
382 sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN
383 sh MAKEDEV i4brbch0 # cdev, ISDN
388 mknod console c 0 0; chmod 600 console
389 mknod kmem c 2 1 root:kmem; chmod 640 kmem
390 mknod mem c 2 0 root:kmem; chmod 640 mem
391 mknod null c 2 2; chmod 666 null
392 mknod random c 2 3; chmod 644 random
393 mknod urandom c 2 4; chmod 644 urandom
394 mknod zero c 2 12; chmod 666 zero
395 mknod io c 2 14; chmod 600 io
396 mknod tty c 1 0; chmod 666 tty
397 mknod klog c 7 0; chmod 600 klog
398 mknod stdin c 22 0; chmod 666 stdin
399 mknod stdout c 22 1; chmod 666 stdout
400 mknod stderr c 22 2; chmod 666 stderr
401 mknod pci c 78 0; chmod 644 pci
404 while [ $i -lt 64 ]; do
415 rm mem kmem pci io klog console # for security
416 ln -sf null mem # for libkvm (ab)users
417 ln -sf null kmem # --//--
426 mknod timezone c 26 0
429 # Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
432 u=`expr $i : '..\(.*\)'`
433 if [ -z "${u}" ]; then u=0; fi
434 # default density, 512b blocks
435 mknod rwt${u} c 10 $(( 0 + $u)) root:operator
436 mknod nrwt${u} c 10 $(( 4 + $u)) root:operator
437 # default density, 1024b blocks
438 # mknod rWt${u} c 10 $((64 + $u)) root:operator
439 # mknod nrWt${u} c 10 $((68 + $u)) root:operator
440 mknod rwt${u}b c 10 $((16 + $u)) root:operator # 60 megabytes
441 mknod nrwt${u}b c 10 $((20 + $u)) root:operator
442 mknod rwt${u}c c 10 $((24 + $u)) root:operator # 120 megabytes
443 mknod nrwt${u}c c 10 $((28 + $u)) root:operator
444 mknod rwt${u}d c 10 $((32 + $u)) root:operator # 150 megabytes
445 mknod nrwt${u}d c 10 $((36 + $u)) root:operator
446 # mknod rwt${u}e c 10 $((40 + $u)) root:operator # 300 megabytes?
447 # mknod nrwt${u}e c 10 $((44 + $u)) root:operator
448 # mknod rwt${u}f c 10 $((48 + $u)) root:operator # 600 megabytes?
449 # mknod nrwt${u}f c 10 $((52 + $u)) root:operator
454 aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|ipsd*s*|md*s*|mlxd*s*|pst*s*|twed*s*|vn*s*|wd*s*|wfd*s*)
457 aacd*s*) name=aacd; chr=151;;
458 ad*s*) name=ad; chr=116;;
459 ar*s*) name=ar; chr=157;;
460 afd*s*) name=afd; chr=118;;
461 amrd*s*) name=amrd; chr=133;;
462 da*s*) name=da; chr=13;;
463 fla*s*) name=fla; chr=102;;
464 idad*s*) name=idad; chr=109;;
465 ipsd*s*) name=ipsd; chr=176;;
466 md*s*) name=md; chr=95;;
467 mlxd*s*) name=mlxd; chr=131;;
468 pst*s*) name=pst; chr=168;;
469 twed*s*) name=twed; chr=147;;
470 vn*s*) name=vn; chr=43;;
471 wd*s*) name=wd; chr=3;;
472 wfd*s*) name=wfd; chr=87;;
475 aacd*s*|amrd*s*|idad*s*|ipsd*s*|mlxd*s*|twed*s*)
476 unit=`expr $i : '....\([0-9]*\)s'`
477 slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
478 part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
480 afd*s*|fla*s*|pst*s*|wfd*s*)
481 unit=`expr $i : '...\([0-9]*\)s'`
482 slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
483 part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
486 unit=`expr $i : '..\([0-9]*\)s'`
487 slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
488 part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
492 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
497 slicename=`dkitos $slice`
498 minor=`dkminor 0 $unit $slice $dkrawpart`
499 mknod $name$unit$slicename c $chr $minor root:operator
500 rm -f r$name$unit$slicename
504 0) slice=$oldslice ;;
506 for part in 0 1 2 3 4 5 6 7
508 minor=`dkminor 0 $unit $slice $part`
509 partname=`dkitop $part`
510 mknod $name$unit$slicename$partname \
511 c $chr $minor root:operator
512 rm -f r$name$unit$slicename$partname
518 echo bad partition for disk in: $i
523 echo bad slice for disk in: $i
528 echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
536 unit=`expr $i : '..\(.*\)'`
540 mknod ${name}${unit} c $chr $(($unit * 64)) root:operator
541 rm -f r${name}${unit}
542 # Fake BSD partitions
543 for i in a b c d e f g h
545 ln -f ${name}${unit} ${name}${unit}$i
546 rm -f r${name}${unit} r${name}${unit}$i
548 # User-readable and programmer-readable name sets
550 mknod ${name}${unit}.1720 c $chr $(($unit * 64 + 1)) \
552 rm -f r${name}${unit}.1720
553 # ln -f ${name}${unit}.1720 ${name}${unit}135hs21
554 # rm -f r${name}${unit}135hs21
556 mknod ${name}${unit}.1480 c $chr $(($unit * 64 + 2)) \
558 rm -f r${name}${unit}.1480
559 # ln -f ${name}${unit}.1480 ${name}${unit}135hs18
560 # rm -f r${name}${unit}135hs18
561 # ln -f ${name}${unit}.1480 ${name}${unit}96hs18
562 # rm -f r${name}${unit}96hs18
564 mknod ${name}${unit}.1440 c $chr $(($unit * 64 + 3)) \
566 rm -f r${name}${unit}.1440
567 # ln -f ${name}${unit}.1440 ${name}${unit}135
568 # rm -f r${name}${unit}135
569 # ln -f ${name}${unit}.1440 ${name}${unit}135ds18
570 # rm -f r${name}${unit}135ds18
571 # ln -f ${name}${unit}.1440 ${name}${unit}96ds18
572 # rm -f r${name}${unit}96ds18
574 mknod ${name}${unit}.1200 c $chr $(($unit * 64 + 4)) \
576 rm -f r${name}${unit}.1200
577 # ln -f ${name}${unit}.1200 ${name}${unit}96
578 # rm -f r${name}${unit}96
579 # ln -f ${name}${unit}.1200 ${name}${unit}96ds15
580 # rm -f r${name}${unit}96ds15
581 # ln -f ${name}${unit}.1200 ${name}${unit}135ds15
582 # rm -f r${name}${unit}135ds15
584 mknod ${name}${unit}.820 c $chr $(($unit * 64 + 5)) \
586 rm -f r${name}${unit}.820
587 # ln -f ${name}${unit}.820 ${name}${unit}96hs10
588 # rm -f r${name}${unit}96hs10
589 # ln -f ${name}${unit}.820 ${name}${unit}135hs10
590 # rm -f r${name}${unit}135hs10
592 mknod ${name}${unit}.800 c $chr $(($unit * 64 + 6)) \
594 rm -f r${name}${unit}.800
595 # ln -f ${name}${unit}.800 ${name}${unit}96ds10
596 # rm -f r${name}${unit}96ds10
597 # ln -f ${name}${unit}.800 ${name}${unit}135ds10
598 # rm -f r${name}${unit}135ds10
600 mknod ${name}${unit}.720 c $chr $(($unit * 64 + 7)) \
602 rm -f r${name}${unit}.720
603 # ln -f ${name}${unit}.720 ${name}${unit}96ds9
604 # rm -f r${name}${unit}96ds9
605 # ln -f ${name}${unit}.720 ${name}${unit}135ds9
606 # rm -f r${name}${unit}135ds9
608 mknod ${name}${unit}.360 c $chr $(($unit * 64 + 8)) \
610 rm -f r${name}${unit}.360
611 # ln -f ${name}${unit}.360 ${name}${unit}48
612 # rm -f r${name}${unit}48
613 # ln -f ${name}${unit}.360 ${name}${unit}48ds9
614 # rm -f r${name}${unit}48ds9
616 mknod ${name}${unit}.640 c $chr $(($unit * 64 + 9)) \
618 rm -f r${name}${unit}.640
619 # ln -f ${name}${unit}.640 ${name}${unit}96ds8
620 # rm -f r${name}${unit}96ds8
621 # ln -f ${name}${unit}.640 ${name}${unit}135ds8
622 # rm -f r${name}${unit}135ds8
624 mknod ${name}${unit}.1232 c $chr $(($unit * 64 + 10)) \
626 rm -f r${name}${unit}.1232
627 # ln -f ${name}${unit}.1232 ${name}${unit}96ds8
628 # rm -f r${name}${unit}96ds8
629 # ln -f ${name}${unit}.1232 ${name}${unit}135ds8
630 # rm -f r${name}${unit}135ds8
633 echo bad unit for disk in: $i
639 aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|ipsd*|md*|mlxd*|pst*|twed*|vn*|wd*|wfd*)
642 aacd*) name=aacd; chr=151;;
643 ad*) name=ad; chr=116;;
644 ar*) name=ar; chr=157;;
645 afd*) name=afd; chr=118;;
646 amrd*) name=amrd; chr=133;;
647 da*) name=da; chr=13;;
648 fla*) name=fla; chr=102;;
649 idad*) name=idad; chr=109;;
650 ipsd*) name=ipsd; chr=176;;
651 md*) name=md; chr=95;;
652 mlxd*) name=mlxd; chr=131;;
653 pst*) name=pst; chr=168;;
654 twed*) name=twed; chr=147;;
655 vn*) name=vn; chr=43;;
656 wd*) name=wd; chr=3;;
657 wfd*) name=wfd; chr=87;;
660 aacd*|amrd*|idad*|ipsd*|mlxd*|twed*)
661 unit=`expr $i : '....\(.*\)'`
664 unit=`expr $i : '...\(.*\)'`
667 unit=`expr $i : '..\(.*\)'`
671 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
672 for slicepartname in s0h s1h s2 s3 s4
674 sh MAKEDEV $name$unit$slicepartname
678 echo bad unit for disk in: $i
688 unit=`expr $i : '...\(.*\)'`
690 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
691 for part in 0 1 2 3 4 5 6 7
693 minor=`dkminor 0 $unit 0 $part`
694 partname=`dkitop $part`
695 mknod $name$unit$partname c $chr $minor root:operator
696 rm -f r$name$unit$partname
700 echo bad unit for disk in: $i
706 # SCSI processor type driver
710 unit=`expr $i : 'pt\([0-9][0-9]*\)'`
711 if [ -z "${unit}" ]; then
714 unit=$(($unit + 1 - 1))
715 mknod ${name}${unit} c $chr `unit2minor $unit`
718 # SCSI SES/SAF-TE type driver
722 unit=`expr $i : 'ses\([0-9][0-9]*\)'`
723 if [ -z "${unit}" ]; then
726 unit=$(($unit + 1 - 1))
727 mknod ${name}${unit} c $chr `unit2minor $unit`
729 # SCSI target mode sample driver
733 unit=`expr $i : 'targ\([0-9][0-9]*\)'`
734 if [ -z "${unit}" ]; then
737 unit=$(($unit + 1 - 1))
738 mknod ${name}${unit} c $chr `unit2minor $unit`
739 mknod ${name}.ctl c $chr 0xffff00ff
742 # CAM transport layer device
744 # This major number is temporary
747 units=`expr $i : 'xpt\(.*\)'`
748 if [ -z "${units}" ]; then
752 while [ $i -lt $units ]; do
755 mknod $dname c $chr `unit2minor $i` root:operator
760 # CAM passthrough device
762 # This major number is temporary
765 units=`expr $i : 'pass\(.*\)'`
766 if [ -z "${units}" ]; then
770 while [ $i -lt $units ]; do
773 mknod $dname c $chr `unit2minor $i` root:operator
778 class=`expr $i : 'pty\(.*\)'`
781 1) offset=32 name=q;;
782 2) offset=64 name=r;;
783 3) offset=96 name=s;;
784 # Note that xterm (at least) only look at p-s.
785 4) offset=128 name=P;;
786 5) offset=160 name=Q;;
787 6) offset=192 name=R;;
788 7) offset=224 name=S;;
789 # This still leaves [tuTU].
790 *) echo bad unit for pty in: $i;;
796 while [ $i -lt 32 ]; do
797 # This was an awk substr() before.
798 c=$(echo 0123456789abcdefghijklmnopqrstuv |
799 dd bs=1 skip=$i count=1 2>/dev/null)
800 mknod tty$name$c c 5 $(($offset + $i))
801 mknod pty$name$c c 6 $(($offset + $i))
811 unit=`expr $i : '..\(.*\)'`
815 [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
816 mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
817 ln -f sa${unit}.ctl rsa${unit}.ctl
820 mknod sa${unit}.${m} c $chr \
821 `saminor 0 ${unit} ${m} 0` root:operator
822 ln -f sa${unit}.${m} rsa${unit}.${m}
823 mknod nsa${unit}.${m} c $chr \
824 `saminor 0 ${unit} ${m} 1` root:operator
825 ln -f nsa${unit}.${m} nrsa${unit}.${m}
826 mknod esa${unit}.${m} c $chr \
827 `saminor 0 ${unit} ${m} 2` root:operator
828 ln -f esa${unit}.${m} ersa${unit}.${m}
830 ln -f sa${unit}.0 sa${unit}
831 ln -f sa${unit}.0 rsa${unit}.0
832 ln -f sa${unit}.0 rsa${unit}
833 ln -f nsa${unit}.0 nsa${unit}
834 ln -f nsa${unit}.0 nrsa${unit}.0
835 ln -f nsa${unit}.0 nrsa${unit}
836 ln -f esa${unit}.0 esa${unit}
837 ln -f esa${unit}.0 ersa${unit}.0
838 ln -f esa${unit}.0 ersa${unit}
841 echo bad unit for tape in: $i
849 unit=`expr $i : '..\(.*\)'`
851 ch*) name=ch; chr=17;;
855 mknod ${name}${unit} c $chr $unit root:operator
858 echo bad unit for media changer in: $i
865 mknod ata c 159 0 root:operator
869 unit=`expr $i : '...\(.*\)'`
873 mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator
875 mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator
876 chmod 640 nast${unit}
879 echo bad unit for tape in: $i
887 units=`expr $i : '...\(.*\)t'`;
888 tracks=`expr $i : '.*t\(.*\)'`;
891 if [ -z "${units}" ]; then
894 if [ -z "${tracks}" ]; then
897 if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then
899 while [ $i -le $units ]; do
903 while [ $j -le ${tracks} ]; do
904 mknod ${dname}t$j c $chr \
905 $((($i * 8) + (65536 * $j))) \
912 echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
920 acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
921 cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
922 mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
923 scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
925 if [ -z "${units}" ]; then
928 if [ "${units}" -le 31 ]; then
930 while [ $i -le $units ]; do
933 mknod ${dname}a c $chr $(($i * 8)) root:operator
936 ln -f ${dname}a ${dname}c;;
938 mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator;;
945 echo "$i is invalid -- can't have more than 32 cd devices"
952 unit=`expr $i : '...\(.*\)'`
956 mknod wcd${unit}a c $chr $(($unit * 8 + 0)) root:operator
957 mknod wcd${unit}c c $chr $(($unit * 8 + 2)) root:operator
958 ln -f wcd${unit}a rwcd${unit}a
959 ln -f wcd${unit}c rwcd${unit}c
960 chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
963 echo bad unit for disk in: $i
971 unit=`expr $i : '...\(.*\)'`
975 mknod rwst${unit} c $chr $(($unit * 8 + 0)) root:operator
976 chmod 640 rwst${unit}
983 unit=`expr $i : 'iic\(.*\)'`
984 mknod iic$unit c 105 `unit2minor $unit`
988 unit=`expr $i : 'smb\(.*\)'`
989 mknod smb$unit c 106 `unit2minor $unit`
993 unit=`expr $i : 'pcfclock\(.*\)'`
994 mknod pcfclock$unit c 140 `unit2minor $unit`
998 unit=`expr $i : 'ppi\(.*\)'`
999 mknod ppi$unit c 82 `unit2minor $unit`
1003 unit=`expr $i : 'pps\(.*\)'`
1004 mknod pps$unit c 89 `unit2minor $unit`
1008 mknod usb c 108 255 root:operator
1014 unit=`expr $i : 'usb\(.*\)'`
1015 mknod usb$unit c 108 `unit2minor $unit` root:operator
1021 unit=`expr $i : 'ucom\(.*\)'`
1022 minor=$(($unit + 128))
1023 minor=`unit2minor $(($unit + 128))`
1024 mknod ucom$unit c 138 $minor uucp:dialer
1030 unit=`expr $i : 'uhid\(.*\)'`
1031 mknod uhid$unit c 122 `unit2minor $unit` root:operator
1037 unit=`expr $i : 'ums\(.*\)'`
1038 mknod ums$unit c 111 `unit2minor $unit` root:operator
1043 unit=`expr $i : 'ulpt\(.*\)'`
1044 minor=`unit2minor $unit`
1045 mknod ulpt$unit c 113 $minor
1046 minor=`unit2minor $(($unit + 64))`
1047 mknod unlpt$unit c 113 $minor # and the 'no prime' version
1052 unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
1053 endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
1054 if [ -z "${unit}" ]; then
1055 echo $i - Invalid unit number
1057 if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15
1058 mknod ugen$unit c 114 \
1059 `unit2minor $(($unit * 16))` root:operator
1061 while [ $i -lt 16 ]; do
1062 mknod ugen$unit.$i c 114 \
1063 `unit2minor $(($unit * 16 + $i))` root:operator
1067 minor=`unit2minor $(($unit * 16 + $endpoint))`
1068 mknod ugen$unit.$endpoint c 114 $minor root:operator
1075 unit=`expr $i : 'urio\(.*\)'`
1076 mknod urio$unit c 143 `unit2minor $unit` root:operator
1082 unit=`expr $i : 'uscanner\(.*\)'`
1083 mknod uscanner$unit c 156 `unit2minor $unit` root:operator
1089 unit=`expr $i : 'umodem\(.*\)'`
1090 mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer
1095 unit=`expr $i : 'lpt\(.*\)'`
1096 mknod lpt$unit c 16 `unit2minor $unit`
1097 mknod lpctl$unit c 16 `unit2minor $(($unit + 128))`
1100 # Use this to create virtual consoles for syscons, pcvt or codrv
1102 # use as MAKEDEV vtyNN to create NN entries
1105 units=`expr $i : 'vty\(.*\)'`
1107 while [ $i -lt $units ]; do
1108 mknod ttyv$(printf %01x $i) c $chr `unit2minor $i`
1111 ln -fs ttyv0 vga # XXX X still needs this pccons relic
1115 units=`expr $i : 'nmdm\(.*\)'`
1118 while [ $i -lt $units ]; do
1119 minor=`unit2minor $i`
1120 minor=$(($minor + $minor))
1121 mknod nmdm${i}A c $chr $minor
1122 mknod nmdm${i}B c $chr $(($minor + 1))
1128 nbpf=`expr $i : 'bpf\(.*\)$'`
1130 while [ $unit -le $nbpf ]; do
1131 mknod bpf$unit c 23 `unit2minor $unit`
1137 mknod speaker c 26 0
1142 unit_low=`expr $i : 'cua.*\(.\)$'`
1149 unit_high=`expr $i : 'cuaa\(.\).$'`
1150 m_high=`ttyminor $unit_high`
1153 unit=$unit_high$unit_low
1154 m=$(($m_high << 16 | `ttyminor $unit_low`))
1155 mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer
1156 mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer
1157 mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer
1162 mknod crypto c 70 0 root:operator
1167 unit=`expr $i : 'fwmem\(.*\)'`
1168 mknod fwmem$unit c 127 $((1<<24 | $unit)) root:operator
1169 chmod 660 fwmem$unit
1173 unit=`expr $i : 'fw\(.*\)'`
1174 mknod fw$unit c 127 $unit root:operator
1178 tty?|tty0?|ttyd?|ttyd??)
1179 unit_low=`expr $i : 'tty.*\(.\)$'`
1186 unit_high=`expr $i : 'ttyd\(.\).$'`
1187 m_high=`ttyminor $unit_high`
1190 unit=$unit_high$unit_low
1191 m=$(($m_high << 16 | `ttyminor $unit_low`))
1192 mknod ttyd$unit c 28 $m
1193 mknod ttyid$unit c 28 $(($m | 32))
1194 mknod ttyld$unit c 28 $(($m | 64))
1199 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1200 g h i j k l m n o p q r s t u v"
1202 card=`expr $i : 'cua.*\(.\)$'`
1203 for unit in $portlist
1205 minor=`ttyminor $unit`
1206 minor=$(($card * 65536 + $minor))
1208 mknod cuac$name c $major $(($minor + 128)) uucp:dialer
1209 mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer
1210 mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer
1216 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1217 g h i j k l m n o p q r s t u v"
1219 card=`expr $i : 'tty.*\(.\)$'`
1220 for unit in $portlist
1222 minor=`ttyminor $unit`
1223 minor=$(($card * 65536 + $minor))
1225 mknod ttyc$name c $major $minor
1226 mknod ttyic$name c $major $(($minor + 32))
1227 mknod ttylc$name c $major $(($minor + 64))
1231 # RISCom8 'rc' driver entries
1235 unit=`expr $i : 'cua.*\(.\)$'`
1237 mknod cuam$unit c 63 $(($m + 128)) uucp:dialer
1242 unit=`expr $i : 'tty.*\(.\)$'`
1244 mknod ttym$unit c 63 $m
1248 # Note: these are 'base 1' to match the numbers on the panels, and to match
1249 # the manual that comes with the system.
1252 nports=`expr $i : 'ttyA\(.*\)$'`
1254 while [ $port -le $nports ]; do
1255 minor=$(($port - 1))
1256 name=$(printf %02d $port)
1257 mknod ttyA$name c $major $minor
1258 mknod ttyiA$name c $major $(($minor + 65536))
1259 mknod ttylA$name c $major $(($minor + 131072))
1262 # For the user-mode control program, 'sicontrol'
1263 mknod si_control c 68 262144
1269 nports=`expr $i : 'cuaA\(.*\)$'`
1271 while [ $port -le $nports ]; do
1272 minor=$(($port - 1))
1273 name=$(printf %02d $port)
1274 mknod cuaA$name c $major $(($minor + 128)) uucp:dialer
1275 mknod cuaiA$name c $major $(($minor + 128 + 65536)) \
1277 mknod cualA$name c $major $(($minor + 128 + 131072)) \
1284 # Alpha AS8[24]00 (TurboLaser) console.
1286 unit=`expr $i : 'zs.*\(.\)$'`
1288 mknod zs$unit c 135 $m
1291 # Digiboard PC/?? 16 port card.
1292 # The current scheme of minor numbering is:
1294 # unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
1296 # CARD bitfield in future versions may be extended to 3 bits.
1301 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1303 card=`expr $i : 'tty.*\(.\)$'`
1304 for unit in $portlist
1306 minor=`ttyminor $unit`
1307 minor=$(($card * 65536 + $minor))
1309 mknod ttyD$name c $major $minor
1310 mknod ttyiD$name c $major $(($minor + 32))
1311 mknod ttylD$name c $major $(($minor + 64))
1317 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1319 card=`expr $i : 'cua.*\(.\)$'`
1320 for unit in $portlist
1322 minor=`ttyminor $unit`
1323 minor=$(($card * 65536 + $minor))
1325 mknod cuaD$name c $major $(($minor + 128)) uucp:dialer
1326 mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer
1327 mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer
1332 # Stallion multi serial cards (stl and stli drivers)
1334 # These drivers reserve 64 minor devices per board, even if the board
1335 # supports only 4 devices. We default to creating only 8 of the 64 devices
1336 # to keep /dev from getting too large (which => slow). The last part of the
1337 # arg is the board number to create ports for. So:
1338 # ttyE0 will create 8 dialin ports ttyE0-ttyE7, plus ttyiE* and ttylE*
1339 # cuaE0 will create 8 dialout ports cuaE0-cuaE7, plus cuaiE* and cualE*
1340 # ttyE1 will create 8 dialin ports ttyE64-ttyE71, plus ttyiE* and ttylE*
1342 # If you have EasyConnect 8/32 or 8/64 cards, you will need to change the
1343 # definition of "maxport" below to get nodes for the full 32 or 64
1346 # Note that the mapping of minor device numbers (with the hole between
1347 # 32-64k) is a bit odd to keep compatibility with ttyd? for
1348 # lock/initial devices.
1349 # Minor device field for the ports is
1350 # card{3} unused{4} unit-msb{1} unused{8} callout{1} lock{1} init{1} unit-lsbs{5}
1351 # for the mem device is
1353 # (For stl, there is only 1 mem device per system; for stli, one per board)
1356 stallion 72 E `expr $i : 'tty.*\(.\)$'` 0
1359 stallion 72 E `expr $i : 'cua.*\(.\)$'` 1
1362 card=`expr $i : 'stl\(.\)$'`
1363 stallion 72 E $card 0
1364 stallion 72 E $card 1
1368 stallion 75 F `expr $i : 'tty.*\(.\)$'` 0
1371 stallion 75 F `expr $i : 'cua.*\(.\)$'` 1
1374 card=`expr $i : 'stl\(.\)$'`
1375 stallion 75 F $card 0
1376 stallion 75 F $card 1
1380 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1381 modulelist="a b c d"
1383 card=`expr $i : 'tty.*\(.\)$'`
1384 for unit in $modulelist
1386 moduleminor=`ttyminor $unit`
1387 moduleminor=$(($moduleminor % 10 * 16))
1390 for unit in $portlist
1392 minor=`ttyminor $unit`
1393 minor=$(($card * 65536 + $minor + $moduleminor))
1394 name=$card$modulename$unit
1396 mknod ttyM$name c $major $minor
1397 mknod ttyiM$name c $major $(($minor + 64))
1398 mknod ttylM$name c $major $(($minor + 128))
1405 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1406 modulelist="a b c d"
1408 card=`expr $i : 'cua.*\(.\)$'`
1409 for unit in $modulelist
1411 moduleminor=`ttyminor $unit`
1412 moduleminor=$(($moduleminor % 10 * 16))
1415 for unit in $portlist
1417 minor=`ttyminor $unit`
1418 minor=$(($card * 65536 + $minor + $moduleminor))
1419 name=$card$modulename$unit
1421 mknod cuaM$name c $major $(($minor + 262144)) \
1423 mknod cuaiM$name c $major $(($minor + 64 + 262144)) \
1425 mknod cualM$name c $major $(($minor + 128 + 262144)) \
1435 MINOR=$(($BOARD * 65536))
1437 dmesg | while read first rest; do
1445 rm -f ttyR* ttyiR* ttylR*
1446 for i in $controllers; do
1448 dmesg | while read first bar ports rest; do
1456 echo -n "Creating $ndevices devices for $i: "
1458 while [ $dev -lt $ndevices ]; do
1459 mknod ttyR$Rnum c $major $MINOR
1460 mknod ttyiR$Rnum c $major $(($MINOR + 32))
1461 mknod ttylR$Rnum c $major $(($MINOR + 64))
1463 MINOR=$(($MINOR + 1))
1466 BOARD=$(($BOARD + 1))
1467 MINOR=$(($BOARD * 65536))
1475 MINOR=$(($BOARD * 65536))
1477 dmesg | while read first rest; do
1485 rm -f cuaR* cuaiR* cualR*
1486 for i in $controllers; do
1488 dmesg | while read first bar ports rest; do
1496 echo -n "Creating $ndevices devices for $i: "
1498 while [ $dev -lt $ndevices ]; do
1499 mknod cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer
1500 mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
1502 mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \
1505 MINOR=$(($MINOR + 1))
1508 BOARD=$(($BOARD + 1))
1509 MINOR=$(($BOARD * 65536))
1515 unit=`expr $i : 'mse\(.*\)'`
1517 # non-blocking for X11
1518 mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))`
1522 unit=`expr $i : 'psm\(.*\)'`
1524 # non-blocking for X11
1525 mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))`
1529 name=`expr $i : 'mouse\(.*\)'`
1530 if [ ! -c $name ]; then
1531 $0 $name # make the appropriate device
1537 mknod pcaudio c 24 0
1538 mknod pcaudioctl c 24 128
1542 mknod socksys c 41 0
1545 chmod 666 socksys nfsd spx
1550 # changes from Linux voxware
1551 # minor Linux FreeBSD
1552 # 8 sequencer2 (aka music0) music0
1553 # 17 patmgr0 sequencer1
1554 # 33 patmgr1 sequencer2
1557 unit=`expr $i : 'snd\(.*\)'`
1560 # XXX write this less verbosely, like std
1561 snd_security_hole=0 # XXX
1562 umask $snd_security_hole
1564 ln -fs mixer$unit mixer
1565 ln -fs sequencer$unit sequencer
1567 ln -fs audio$unit audio
1568 ln -fs dspW$unit dspW
1569 ln -fs music$unit music
1571 ln -fs dsp$unit.0 dsp$unit
1572 ln -fs audio$unit.0 audio$unit
1573 ln -fs dspW$unit.0 dspW$unit
1575 mknod mixer$unit c $chr `unit2minor $(($unit * 16 + 0))`
1576 mknod sequencer$unit c $chr `unit2minor $(($unit * 16 + 1))`
1577 mknod midi$unit c $chr `unit2minor $(($unit * 16 + 2))`
1581 minor=$(($chn * 65536 + $unit * 16))
1582 mknod dsp$unit.$chn c $chr $(($minor + 3))
1583 mknod audio$unit.$chn c $chr $(($minor + 4))
1584 mknod dspW$unit.$chn c $chr $(($minor + 5))
1587 mknod sndstat c $chr 6
1588 # minor number 7 is unused
1589 mknod music$unit c $chr `unit2minor $(($unit * 16 + 8))`
1590 mknod pss$unit c $chr `unit2minor $(($unit * 16 + 9))`
1591 # minor numbers 10-15 are unused
1596 mknod vatio c 25 128
1601 unit=`expr $i : 'gsc\(.*\)'`
1602 mknod gsc${unit} c 47 `unit2minor $unit`
1603 mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))`
1604 mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))`
1605 mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))`
1606 chmod 666 gsc${unit}*
1610 mknod apm c 39 0 root:operator
1615 mknod apmctl c 39 8 root:operator
1620 unit=`expr $i : 'card\(.*\)'`
1622 mknod card$unit c $chr `unit2minor $unit`
1628 *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
1629 *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
1630 *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
1631 *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
1634 ttyy?) unit=$(($unit + 16));;
1635 ttyz?) unit=$(($unit + 32));;
1641 mknod cronyx c 42 63
1645 mknod joy0 c 51 0 root:operator
1646 mknod joy1 c 51 1 root:operator
1656 unit=`expr $i : 'ctx\(.*\)'`
1657 mknod ctx$unit c 40 `unit2minor $unit`
1662 unit=`expr $i : 'meteor\(.*\)'`
1663 mknod meteor$unit c 67 `unit2minor $unit`
1664 chmod 444 meteor$unit
1668 unit=`expr $i : 'bktr\(.*\)'`
1669 mknod bktr$unit c 92 `unit2minor $unit`
1670 mknod tuner$unit c 92 `unit2minor $((16 + $unit))`
1671 mknod vbi$unit c 92 `unit2minor $((32 + $unit))`
1672 chmod 444 bktr$unit tuner$unit vbi$unit
1676 ntun=`expr $i : 'tun\(.*\)$'`
1678 while [ $unit -le $ntun ]; do
1679 mknod tun$unit c 52 `unit2minor $unit`
1685 ntap=`expr $i : 'tap\(.*\)$'`
1687 while [ $unit -le $ntap ]; do
1688 mknod tap$unit c 149 `unit2minor $unit` root:network
1694 mknod sysmouse c 12 128
1695 mknod consolectl c 12 255
1699 mknod jogdial c 160 0
1703 unit=`expr $i : 'snp\(.*\)'`
1704 mknod snp$unit c 53 `unit2minor $unit`
1707 # dufault@hda.com: If I do much more work on other A-D boards
1708 # then eventually we'll have a "ad" and "dio" interface and some of these
1709 # "labpcaio" ones will be gone.
1710 # labpcaio: D-A and A-D.
1711 # labpcdio: Digital in and Digital out.
1718 unit=`expr $i : 'labpcaio\(.*\)'`
1719 all="0 1 2 3 4 5 6 7"
1724 unit=`expr $i : 'labpcdio\(.*\)'`
1729 die 3 "Don't know LabPC type $i"
1732 if [ -z "${unit}" ]; then
1737 mknod $name$unit c 66 $(($offset + $unit))
1742 mknod $name$i c 66 $(($offset + $i))
1746 echo "No such LabPC unit: $unit"
1753 mknod perfmon c 2 32 root:kmem
1760 mknod ipstate c 79 2
1765 mknod elan-mmcr c 100 0 # XXX local major
1770 unit=`expr $i : 'kbd\(.*\)'`
1772 mknod kbd$unit c $chr `unit2minor $unit`
1784 unit=`expr $i : 'i4brbch\(.*\)'`
1785 mknod i4brbch$unit c 57 `unit2minor $unit`
1790 unit=`expr $i : 'i4bteld\(.*\)'`
1791 mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))`
1795 unit=`expr $i : 'i4btel\(.*\)'`
1796 mknod i4btel$unit c 56 `unit2minor $unit`
1800 unit=`expr $i : 'i4btrc\(.*\)'`
1801 mknod i4btrc$unit c 59 `unit2minor $unit`
1805 unit=`expr $i : 'aac\(.*\)'`
1806 mknod aac$unit c 150 `unit2minor $unit`
1807 ln -fs aac$unit afa$unit
1808 ln -fs aac$unit hpn$unit
1812 unit=`expr $i : 'mlx\(.*\)'`
1813 mknod mlx$unit c 130 `unit2minor $unit`
1817 unit=`expr $i : 'amr\(.*\)'`
1818 mknod amr$unit c 132 `unit2minor $unit`
1822 unit=`expr $i : 'ips\(.*\)'`
1823 mknod mlx$unit c 175 `unit2minor $unit`
1827 unit=`expr $i : 'ciss\(.*\)'`
1828 mknod ciss$unit c 166 `unit2minor $unit`
1832 mknod agpgart c 148 0
1836 unit=`expr $i : 'twe\(.*\)'`
1837 mknod twe$unit c 146 `unit2minor $unit`
1841 unit=`expr $i : 'tw\(.*\)'`
1842 mknod tw$unit c 19 `unit2minor $unit` root:operator
1846 unit=`expr $i : 'cfs\(.*\)'`
1847 mknod cfs$unit c 93 $unit root:operator
1851 unit=`expr $i : 'nsmb\(.*\)'`
1852 mknod nsmb$unit c 144 $unit
1856 umask 0 # XXX should be elsewhere
1862 echo $i - no such device name