1 /* $OpenBSD: if_sk.c,v 1.33 2003/08/12 05:23:06 nate Exp $ */
4 * Copyright (c) 1997, 1998, 1999, 2000
5 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 * must display the following acknowledgement:
17 * This product includes software developed by Bill Paul.
18 * 4. Neither the name of the author nor the names of any co-contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32 * THE POSSIBILITY OF SUCH DAMAGE.
34 * $FreeBSD: src/sys/pci/if_sk.c,v 1.19.2.9 2003/03/05 18:42:34 njl Exp $
35 * $DragonFly: src/sys/dev/netif/sk/if_sk.c,v 1.17 2004/07/23 07:16:28 joerg Exp $
37 * $FreeBSD: src/sys/pci/if_sk.c,v 1.19.2.9 2003/03/05 18:42:34 njl Exp $
41 * Copyright (c) 2003 Nathan L. Binkert <binkertn@umich.edu>
43 * Permission to use, copy, modify, and distribute this software for any
44 * purpose with or without fee is hereby granted, provided that the above
45 * copyright notice and this permission notice appear in all copies.
47 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
48 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
49 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
50 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
51 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
52 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
53 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
57 * SysKonnect SK-NET gigabit ethernet driver for FreeBSD. Supports
58 * the SK-984x series adapters, both single port and dual port.
60 * The XaQti XMAC II datasheet,
61 * http://www.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf
62 * The SysKonnect GEnesis manual, http://www.syskonnect.com
64 * Note: XaQti has been aquired by Vitesse, and Vitesse does not have the
65 * XMAC II datasheet online. I have put my copy at people.freebsd.org as a
66 * convenience to others until Vitesse corrects this problem:
68 * http://people.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf
70 * Written by Bill Paul <wpaul@ee.columbia.edu>
71 * Department of Electrical Engineering
72 * Columbia University, New York City
76 * The SysKonnect gigabit ethernet adapters consist of two main
77 * components: the SysKonnect GEnesis controller chip and the XaQti Corp.
78 * XMAC II gigabit ethernet MAC. The XMAC provides all of the MAC
79 * components and a PHY while the GEnesis controller provides a PCI
80 * interface with DMA support. Each card may have between 512K and
81 * 2MB of SRAM on board depending on the configuration.
83 * The SysKonnect GEnesis controller can have either one or two XMAC
84 * chips connected to it, allowing single or dual port NIC configurations.
85 * SysKonnect has the distinction of being the only vendor on the market
86 * with a dual port gigabit ethernet NIC. The GEnesis provides dual FIFOs,
87 * dual DMA queues, packet/MAC/transmit arbiters and direct access to the
88 * XMAC registers. This driver takes advantage of these features to allow
89 * both XMACs to operate as independent interfaces.
92 #include <sys/param.h>
93 #include <sys/systm.h>
94 #include <sys/sockio.h>
96 #include <sys/malloc.h>
97 #include <sys/kernel.h>
98 #include <sys/socket.h>
99 #include <sys/queue.h>
102 #include <net/if_arp.h>
103 #include <net/ethernet.h>
104 #include <net/if_dl.h>
105 #include <net/if_media.h>
109 #include <vm/vm.h> /* for vtophys */
110 #include <vm/pmap.h> /* for vtophys */
111 #include <machine/clock.h> /* for DELAY */
112 #include <machine/bus_pio.h>
113 #include <machine/bus_memio.h>
114 #include <machine/bus.h>
115 #include <machine/resource.h>
117 #include <sys/rman.h>
119 #include "../mii_layer/mii.h"
120 #include "../mii_layer/miivar.h"
121 #include "../mii_layer/brgphyreg.h"
123 #include <bus/pci/pcireg.h>
124 #include <bus/pci/pcivar.h>
127 #define SK_USEIOSPACE
130 #include "if_skreg.h"
131 #include "xmaciireg.h"
132 #include "yukonreg.h"
134 /* "controller miibus0" required. See GENERIC if you get errors here. */
135 #include "miibus_if.h"
137 static struct sk_type sk_devs[] = {
141 "SysKonnect Gigabit Ethernet (V1.0)"
146 "SysKonnect Gigabit Ethernet (V2.0)"
151 "Marvell Gigabit Ethernet"
156 "3Com 3C940 Gigabit Ethernet"
161 static int skc_probe (device_t);
162 static int skc_attach (device_t);
163 static int skc_detach (device_t);
164 static void skc_shutdown (device_t);
165 static int sk_probe (device_t);
166 static int sk_attach (device_t);
167 static int sk_detach (device_t);
168 static void sk_tick (void *);
169 static void sk_intr (void *);
170 static void sk_intr_bcom (struct sk_if_softc *);
171 static void sk_intr_xmac (struct sk_if_softc *);
172 static void sk_intr_yukon (struct sk_if_softc *);
173 static void sk_rxeof (struct sk_if_softc *);
174 static void sk_txeof (struct sk_if_softc *);
175 static int sk_encap (struct sk_if_softc *, struct mbuf *,
177 static void sk_start (struct ifnet *);
178 static int sk_ioctl (struct ifnet *, u_long, caddr_t,
180 static void sk_init (void *);
181 static void sk_init_xmac (struct sk_if_softc *);
182 static void sk_init_yukon (struct sk_if_softc *);
183 static void sk_stop (struct sk_if_softc *);
184 static void sk_watchdog (struct ifnet *);
185 static int sk_ifmedia_upd (struct ifnet *);
186 static void sk_ifmedia_sts (struct ifnet *, struct ifmediareq *);
187 static void sk_reset (struct sk_softc *);
188 static int sk_newbuf (struct sk_if_softc *,
189 struct sk_chain *, struct mbuf *);
190 static int sk_alloc_jumbo_mem (struct sk_if_softc *);
191 static void *sk_jalloc (struct sk_if_softc *);
192 static void sk_jfree (caddr_t, u_int);
193 static void sk_jref (caddr_t, u_int);
194 static int sk_init_rx_ring (struct sk_if_softc *);
195 static void sk_init_tx_ring (struct sk_if_softc *);
196 static u_int32_t sk_win_read_4 (struct sk_softc *, int);
197 static u_int16_t sk_win_read_2 (struct sk_softc *, int);
198 static u_int8_t sk_win_read_1 (struct sk_softc *, int);
199 static void sk_win_write_4 (struct sk_softc *, int, u_int32_t);
200 static void sk_win_write_2 (struct sk_softc *, int, u_int32_t);
201 static void sk_win_write_1 (struct sk_softc *, int, u_int32_t);
202 static u_int8_t sk_vpd_readbyte (struct sk_softc *, int);
203 static void sk_vpd_read_res (struct sk_softc *,
204 struct vpd_res *, int);
205 static void sk_vpd_read (struct sk_softc *);
207 static int sk_miibus_readreg (device_t, int, int);
208 static int sk_miibus_writereg (device_t, int, int, int);
209 static void sk_miibus_statchg (device_t);
211 static int sk_xmac_miibus_readreg (struct sk_if_softc *, int, int);
212 static int sk_xmac_miibus_writereg (struct sk_if_softc *, int, int, int);
213 static void sk_xmac_miibus_statchg (struct sk_if_softc *);
215 static int sk_marv_miibus_readreg (struct sk_if_softc *, int, int);
216 static int sk_marv_miibus_writereg (struct sk_if_softc *, int, int, int);
217 static void sk_marv_miibus_statchg (struct sk_if_softc *);
219 static u_int32_t xmac_calchash (caddr_t);
220 static u_int32_t gmac_calchash (caddr_t);
221 static void sk_setfilt (struct sk_if_softc *, caddr_t, int);
222 static void sk_setmulti (struct sk_if_softc *);
223 static void sk_setpromisc (struct sk_if_softc *);
226 #define SK_RES SYS_RES_IOPORT
227 #define SK_RID SK_PCI_LOIO
229 #define SK_RES SYS_RES_MEMORY
230 #define SK_RID SK_PCI_LOMEM
234 * Note that we have newbus methods for both the GEnesis controller
235 * itself and the XMAC(s). The XMACs are children of the GEnesis, and
236 * the miibus code is a child of the XMACs. We need to do it this way
237 * so that the miibus drivers can access the PHY registers on the
238 * right PHY. It's not quite what I had in mind, but it's the only
239 * design that achieves the desired effect.
241 static device_method_t skc_methods[] = {
242 /* Device interface */
243 DEVMETHOD(device_probe, skc_probe),
244 DEVMETHOD(device_attach, skc_attach),
245 DEVMETHOD(device_detach, skc_detach),
246 DEVMETHOD(device_shutdown, skc_shutdown),
249 DEVMETHOD(bus_print_child, bus_generic_print_child),
250 DEVMETHOD(bus_driver_added, bus_generic_driver_added),
255 static driver_t skc_driver = {
258 sizeof(struct sk_softc)
261 static devclass_t skc_devclass;
263 static device_method_t sk_methods[] = {
264 /* Device interface */
265 DEVMETHOD(device_probe, sk_probe),
266 DEVMETHOD(device_attach, sk_attach),
267 DEVMETHOD(device_detach, sk_detach),
268 DEVMETHOD(device_shutdown, bus_generic_shutdown),
271 DEVMETHOD(bus_print_child, bus_generic_print_child),
272 DEVMETHOD(bus_driver_added, bus_generic_driver_added),
275 DEVMETHOD(miibus_readreg, sk_miibus_readreg),
276 DEVMETHOD(miibus_writereg, sk_miibus_writereg),
277 DEVMETHOD(miibus_statchg, sk_miibus_statchg),
282 static driver_t sk_driver = {
285 sizeof(struct sk_if_softc)
288 static devclass_t sk_devclass;
290 DECLARE_DUMMY_MODULE(if_sk);
291 DRIVER_MODULE(if_sk, pci, skc_driver, skc_devclass, 0, 0);
292 DRIVER_MODULE(if_sk, skc, sk_driver, sk_devclass, 0, 0);
293 DRIVER_MODULE(miibus, sk, miibus_driver, miibus_devclass, 0, 0);
295 #define SK_SETBIT(sc, reg, x) \
296 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | x)
298 #define SK_CLRBIT(sc, reg, x) \
299 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~x)
301 #define SK_WIN_SETBIT_4(sc, reg, x) \
302 sk_win_write_4(sc, reg, sk_win_read_4(sc, reg) | x)
304 #define SK_WIN_CLRBIT_4(sc, reg, x) \
305 sk_win_write_4(sc, reg, sk_win_read_4(sc, reg) & ~x)
307 #define SK_WIN_SETBIT_2(sc, reg, x) \
308 sk_win_write_2(sc, reg, sk_win_read_2(sc, reg) | x)
310 #define SK_WIN_CLRBIT_2(sc, reg, x) \
311 sk_win_write_2(sc, reg, sk_win_read_2(sc, reg) & ~x)
313 static u_int32_t sk_win_read_4(sc, reg)
318 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
319 return(CSR_READ_4(sc, SK_WIN_BASE + SK_REG(reg)));
321 return(CSR_READ_4(sc, reg));
325 static u_int16_t sk_win_read_2(sc, reg)
330 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
331 return(CSR_READ_2(sc, SK_WIN_BASE + SK_REG(reg)));
333 return(CSR_READ_2(sc, reg));
337 static u_int8_t sk_win_read_1(sc, reg)
342 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
343 return(CSR_READ_1(sc, SK_WIN_BASE + SK_REG(reg)));
345 return(CSR_READ_1(sc, reg));
349 static void sk_win_write_4(sc, reg, val)
355 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
356 CSR_WRITE_4(sc, SK_WIN_BASE + SK_REG(reg), val);
358 CSR_WRITE_4(sc, reg, val);
363 static void sk_win_write_2(sc, reg, val)
369 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
370 CSR_WRITE_2(sc, SK_WIN_BASE + SK_REG(reg), val);
372 CSR_WRITE_2(sc, reg, val);
377 static void sk_win_write_1(sc, reg, val)
383 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
384 CSR_WRITE_1(sc, SK_WIN_BASE + SK_REG(reg), val);
386 CSR_WRITE_1(sc, reg, val);
392 * The VPD EEPROM contains Vital Product Data, as suggested in
393 * the PCI 2.1 specification. The VPD data is separared into areas
394 * denoted by resource IDs. The SysKonnect VPD contains an ID string
395 * resource (the name of the adapter), a read-only area resource
396 * containing various key/data fields and a read/write area which
397 * can be used to store asset management information or log messages.
398 * We read the ID string and read-only into buffers attached to
399 * the controller softc structure for later use. At the moment,
400 * we only use the ID string during sk_attach().
402 static u_int8_t sk_vpd_readbyte(sc, addr)
408 sk_win_write_2(sc, SK_PCI_REG(SK_PCI_VPD_ADDR), addr);
409 for (i = 0; i < SK_TIMEOUT; i++) {
411 if (sk_win_read_2(sc,
412 SK_PCI_REG(SK_PCI_VPD_ADDR)) & SK_VPD_FLAG)
419 return(sk_win_read_1(sc, SK_PCI_REG(SK_PCI_VPD_DATA)));
422 static void sk_vpd_read_res(sc, res, addr)
430 ptr = (u_int8_t *)res;
431 for (i = 0; i < sizeof(struct vpd_res); i++)
432 ptr[i] = sk_vpd_readbyte(sc, i + addr);
437 static void sk_vpd_read(sc)
443 if (sc->sk_vpd_prodname != NULL)
444 free(sc->sk_vpd_prodname, M_DEVBUF);
445 if (sc->sk_vpd_readonly != NULL)
446 free(sc->sk_vpd_readonly, M_DEVBUF);
447 sc->sk_vpd_prodname = NULL;
448 sc->sk_vpd_readonly = NULL;
450 sk_vpd_read_res(sc, &res, pos);
452 if (res.vr_id != VPD_RES_ID) {
453 printf("skc%d: bad VPD resource id: expected %x got %x\n",
454 sc->sk_unit, VPD_RES_ID, res.vr_id);
459 sc->sk_vpd_prodname = malloc(res.vr_len + 1, M_DEVBUF, M_INTWAIT);
460 for (i = 0; i < res.vr_len; i++)
461 sc->sk_vpd_prodname[i] = sk_vpd_readbyte(sc, i + pos);
462 sc->sk_vpd_prodname[i] = '\0';
465 sk_vpd_read_res(sc, &res, pos);
467 if (res.vr_id != VPD_RES_READ) {
468 printf("skc%d: bad VPD resource id: expected %x got %x\n",
469 sc->sk_unit, VPD_RES_READ, res.vr_id);
474 sc->sk_vpd_readonly = malloc(res.vr_len, M_DEVBUF, M_INTWAIT);
475 for (i = 0; i < res.vr_len + 1; i++)
476 sc->sk_vpd_readonly[i] = sk_vpd_readbyte(sc, i + pos);
481 static int sk_miibus_readreg(dev, phy, reg)
485 struct sk_if_softc *sc_if;
487 sc_if = device_get_softc(dev);
489 switch(sc_if->sk_softc->sk_type) {
491 return(sk_xmac_miibus_readreg(sc_if, phy, reg));
493 return(sk_marv_miibus_readreg(sc_if, phy, reg));
499 static int sk_miibus_writereg(dev, phy, reg, val)
503 struct sk_if_softc *sc_if;
505 sc_if = device_get_softc(dev);
507 switch(sc_if->sk_softc->sk_type) {
509 return(sk_xmac_miibus_writereg(sc_if, phy, reg, val));
511 return(sk_marv_miibus_writereg(sc_if, phy, reg, val));
517 static void sk_miibus_statchg(dev)
520 struct sk_if_softc *sc_if;
522 sc_if = device_get_softc(dev);
524 switch(sc_if->sk_softc->sk_type) {
526 sk_xmac_miibus_statchg(sc_if);
529 sk_marv_miibus_statchg(sc_if);
536 static int sk_xmac_miibus_readreg(sc_if, phy, reg)
537 struct sk_if_softc *sc_if;
542 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC && phy != 0)
545 SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8));
546 SK_XM_READ_2(sc_if, XM_PHY_DATA);
547 if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) {
548 for (i = 0; i < SK_TIMEOUT; i++) {
550 if (SK_XM_READ_2(sc_if, XM_MMUCMD) &
551 XM_MMUCMD_PHYDATARDY)
555 if (i == SK_TIMEOUT) {
556 printf("sk%d: phy failed to come ready\n",
562 return(SK_XM_READ_2(sc_if, XM_PHY_DATA));
565 static int sk_xmac_miibus_writereg(sc_if, phy, reg, val)
566 struct sk_if_softc *sc_if;
571 SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8));
572 for (i = 0; i < SK_TIMEOUT; i++) {
573 if (!(SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY))
577 if (i == SK_TIMEOUT) {
578 printf("sk%d: phy failed to come ready\n", sc_if->sk_unit);
582 SK_XM_WRITE_2(sc_if, XM_PHY_DATA, val);
583 for (i = 0; i < SK_TIMEOUT; i++) {
585 if (!(SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY))
590 printf("sk%d: phy write timed out\n", sc_if->sk_unit);
595 static void sk_xmac_miibus_statchg(sc_if)
596 struct sk_if_softc *sc_if;
598 struct mii_data *mii;
600 mii = device_get_softc(sc_if->sk_miibus);
603 * If this is a GMII PHY, manually set the XMAC's
604 * duplex mode accordingly.
606 if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) {
607 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
608 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX);
610 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX);
617 static int sk_marv_miibus_readreg(sc_if, phy, reg)
618 struct sk_if_softc *sc_if;
625 (sc_if->sk_phytype != SK_PHYTYPE_MARV_COPPER &&
626 sc_if->sk_phytype != SK_PHYTYPE_MARV_FIBER)) {
630 SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) |
631 YU_SMICR_REGAD(reg) | YU_SMICR_OP_READ);
633 for (i = 0; i < SK_TIMEOUT; i++) {
635 val = SK_YU_READ_2(sc_if, YUKON_SMICR);
636 if (val & YU_SMICR_READ_VALID)
640 if (i == SK_TIMEOUT) {
641 printf("sk%d: phy failed to come ready\n",
646 val = SK_YU_READ_2(sc_if, YUKON_SMIDR);
651 static int sk_marv_miibus_writereg(sc_if, phy, reg, val)
652 struct sk_if_softc *sc_if;
657 SK_YU_WRITE_2(sc_if, YUKON_SMIDR, val);
658 SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) |
659 YU_SMICR_REGAD(reg) | YU_SMICR_OP_WRITE);
661 for (i = 0; i < SK_TIMEOUT; i++) {
663 if (SK_YU_READ_2(sc_if, YUKON_SMICR) & YU_SMICR_BUSY)
670 static void sk_marv_miibus_statchg(sc_if)
671 struct sk_if_softc *sc_if;
676 #define XMAC_POLY 0xEDB88320
677 #define GMAC_POLY 0x04C11DB7L
680 static u_int32_t xmac_calchash(addr)
683 u_int32_t idx, bit, data, crc;
685 /* Compute CRC for the address value. */
686 crc = 0xFFFFFFFF; /* initial value */
688 for (idx = 0; idx < 6; idx++) {
689 for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1)
690 crc = (crc >> 1) ^ (((crc ^ data) & 1) ? XMAC_POLY : 0);
693 return (~crc & ((1 << HASH_BITS) - 1));
696 static u_int32_t gmac_calchash(addr)
699 u_int32_t idx, bit, crc, tmpData, data;
701 /* Compute CRC for the address value. */
702 crc = 0xFFFFFFFF; /* initial value */
704 for (idx = 0; idx < 6; idx++) {
707 /* Change bit order in byte. */
709 for (bit = 0; bit < 8; bit++) {
711 data |= 1 << (7 - bit);
714 data &= ~(1 << (7 - bit));
721 for (bit = 0; bit < 8; bit++) {
722 if (crc & 0x80000000) {
723 crc = (crc << 1) ^ GMAC_POLY;
730 return (crc & ((1 << HASH_BITS) - 1));
733 static void sk_setfilt(sc_if, addr, slot)
734 struct sk_if_softc *sc_if;
740 base = XM_RXFILT_ENTRY(slot);
742 SK_XM_WRITE_2(sc_if, base, *(u_int16_t *)(&addr[0]));
743 SK_XM_WRITE_2(sc_if, base + 2, *(u_int16_t *)(&addr[2]));
744 SK_XM_WRITE_2(sc_if, base + 4, *(u_int16_t *)(&addr[4]));
749 static void sk_setmulti(sc_if)
750 struct sk_if_softc *sc_if;
752 struct sk_softc *sc = sc_if->sk_softc;
753 struct ifnet *ifp = &sc_if->arpcom.ac_if;
754 u_int32_t hashes[2] = { 0, 0 };
756 struct ifmultiaddr *ifma;
757 u_int8_t dummy[] = { 0, 0, 0, 0, 0 ,0 };
760 /* First, zot all the existing filters. */
761 switch(sc->sk_type) {
763 for (i = 1; i < XM_RXFILT_MAX; i++)
764 sk_setfilt(sc_if, (caddr_t)&dummy, i);
766 SK_XM_WRITE_4(sc_if, XM_MAR0, 0);
767 SK_XM_WRITE_4(sc_if, XM_MAR2, 0);
770 SK_YU_WRITE_2(sc_if, YUKON_MCAH1, 0);
771 SK_YU_WRITE_2(sc_if, YUKON_MCAH2, 0);
772 SK_YU_WRITE_2(sc_if, YUKON_MCAH3, 0);
773 SK_YU_WRITE_2(sc_if, YUKON_MCAH4, 0);
777 /* Now program new ones. */
778 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
779 hashes[0] = 0xFFFFFFFF;
780 hashes[1] = 0xFFFFFFFF;
783 /* First find the tail of the list. */
784 for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
785 ifma = ifma->ifma_link.le_next) {
786 if (ifma->ifma_link.le_next == NULL)
789 /* Now traverse the list backwards. */
790 for (; ifma != NULL && ifma != (void *)&ifp->if_multiaddrs;
791 ifma = (struct ifmultiaddr *)ifma->ifma_link.le_prev) {
792 if (ifma->ifma_addr->sa_family != AF_LINK)
795 * Program the first XM_RXFILT_MAX multicast groups
796 * into the perfect filter. For all others,
797 * use the hash table.
799 if (sc->sk_type == SK_GENESIS && i < XM_RXFILT_MAX) {
801 LLADDR((struct sockaddr_dl *)ifma->ifma_addr), i);
806 switch(sc->sk_type) {
809 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
811 hashes[0] |= (1 << h);
813 hashes[1] |= (1 << (h - 32));
818 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
820 hashes[0] |= (1 << h);
822 hashes[1] |= (1 << (h - 32));
828 switch(sc->sk_type) {
830 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_HASH|
831 XM_MODE_RX_USE_PERFECT);
832 SK_XM_WRITE_4(sc_if, XM_MAR0, hashes[0]);
833 SK_XM_WRITE_4(sc_if, XM_MAR2, hashes[1]);
836 SK_YU_WRITE_2(sc_if, YUKON_MCAH1, hashes[0] & 0xffff);
837 SK_YU_WRITE_2(sc_if, YUKON_MCAH2, (hashes[0] >> 16) & 0xffff);
838 SK_YU_WRITE_2(sc_if, YUKON_MCAH3, hashes[1] & 0xffff);
839 SK_YU_WRITE_2(sc_if, YUKON_MCAH4, (hashes[1] >> 16) & 0xffff);
846 static void sk_setpromisc(sc_if)
847 struct sk_if_softc *sc_if;
849 struct sk_softc *sc = sc_if->sk_softc;
850 struct ifnet *ifp = &sc_if->arpcom.ac_if;
852 switch(sc->sk_type) {
854 if (ifp->if_flags & IFF_PROMISC) {
855 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC);
857 SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC);
861 if (ifp->if_flags & IFF_PROMISC) {
862 SK_YU_CLRBIT_2(sc_if, YUKON_RCR,
863 YU_RCR_UFLEN | YU_RCR_MUFLEN);
865 SK_YU_SETBIT_2(sc_if, YUKON_RCR,
866 YU_RCR_UFLEN | YU_RCR_MUFLEN);
874 static int sk_init_rx_ring(sc_if)
875 struct sk_if_softc *sc_if;
877 struct sk_chain_data *cd = &sc_if->sk_cdata;
878 struct sk_ring_data *rd = sc_if->sk_rdata;
881 bzero((char *)rd->sk_rx_ring,
882 sizeof(struct sk_rx_desc) * SK_RX_RING_CNT);
884 for (i = 0; i < SK_RX_RING_CNT; i++) {
885 cd->sk_rx_chain[i].sk_desc = &rd->sk_rx_ring[i];
886 if (sk_newbuf(sc_if, &cd->sk_rx_chain[i], NULL) == ENOBUFS)
888 if (i == (SK_RX_RING_CNT - 1)) {
889 cd->sk_rx_chain[i].sk_next =
891 rd->sk_rx_ring[i].sk_next =
892 vtophys(&rd->sk_rx_ring[0]);
894 cd->sk_rx_chain[i].sk_next =
895 &cd->sk_rx_chain[i + 1];
896 rd->sk_rx_ring[i].sk_next =
897 vtophys(&rd->sk_rx_ring[i + 1]);
901 sc_if->sk_cdata.sk_rx_prod = 0;
902 sc_if->sk_cdata.sk_rx_cons = 0;
907 static void sk_init_tx_ring(sc_if)
908 struct sk_if_softc *sc_if;
910 struct sk_chain_data *cd = &sc_if->sk_cdata;
911 struct sk_ring_data *rd = sc_if->sk_rdata;
914 bzero((char *)sc_if->sk_rdata->sk_tx_ring,
915 sizeof(struct sk_tx_desc) * SK_TX_RING_CNT);
917 for (i = 0; i < SK_TX_RING_CNT; i++) {
918 cd->sk_tx_chain[i].sk_desc = &rd->sk_tx_ring[i];
919 if (i == (SK_TX_RING_CNT - 1)) {
920 cd->sk_tx_chain[i].sk_next =
922 rd->sk_tx_ring[i].sk_next =
923 vtophys(&rd->sk_tx_ring[0]);
925 cd->sk_tx_chain[i].sk_next =
926 &cd->sk_tx_chain[i + 1];
927 rd->sk_tx_ring[i].sk_next =
928 vtophys(&rd->sk_tx_ring[i + 1]);
932 sc_if->sk_cdata.sk_tx_prod = 0;
933 sc_if->sk_cdata.sk_tx_cons = 0;
934 sc_if->sk_cdata.sk_tx_cnt = 0;
939 static int sk_newbuf(sc_if, c, m)
940 struct sk_if_softc *sc_if;
944 struct mbuf *m_new = NULL;
945 struct sk_rx_desc *r;
950 MGETHDR(m_new, MB_DONTWAIT, MT_DATA);
954 /* Allocate the jumbo buffer */
955 buf = sk_jalloc(sc_if);
959 printf("sk%d: jumbo allocation failed "
960 "-- packet dropped!\n", sc_if->sk_unit);
965 /* Attach the buffer to the mbuf */
966 m_new->m_data = m_new->m_ext.ext_buf = (void *)buf;
967 m_new->m_flags |= M_EXT;
968 m_new->m_ext.ext_size = m_new->m_pkthdr.len =
969 m_new->m_len = SK_MCLBYTES;
970 m_new->m_ext.ext_free = sk_jfree;
971 m_new->m_ext.ext_ref = sk_jref;
974 * We're re-using a previously allocated mbuf;
975 * be sure to re-init pointers and lengths to
979 m_new->m_len = m_new->m_pkthdr.len = SK_MCLBYTES;
980 m_new->m_data = m_new->m_ext.ext_buf;
984 * Adjust alignment so packet payload begins on a
985 * longword boundary. Mandatory for Alpha, useful on
988 m_adj(m_new, ETHER_ALIGN);
992 r->sk_data_lo = vtophys(mtod(m_new, caddr_t));
993 r->sk_ctl = m_new->m_len | SK_RXSTAT;
999 * Allocate jumbo buffer storage. The SysKonnect adapters support
1000 * "jumbograms" (9K frames), although SysKonnect doesn't currently
1001 * use them in their drivers. In order for us to use them, we need
1002 * large 9K receive buffers, however standard mbuf clusters are only
1003 * 2048 bytes in size. Consequently, we need to allocate and manage
1004 * our own jumbo buffer pool. Fortunately, this does not require an
1005 * excessive amount of additional code.
1007 static int sk_alloc_jumbo_mem(sc_if)
1008 struct sk_if_softc *sc_if;
1012 struct sk_jpool_entry *entry;
1014 /* Grab a big chunk o' storage. */
1015 sc_if->sk_cdata.sk_jumbo_buf = contigmalloc(SK_JMEM, M_DEVBUF,
1016 M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
1018 if (sc_if->sk_cdata.sk_jumbo_buf == NULL) {
1019 printf("sk%d: no memory for jumbo buffers!\n", sc_if->sk_unit);
1023 SLIST_INIT(&sc_if->sk_jfree_listhead);
1024 SLIST_INIT(&sc_if->sk_jinuse_listhead);
1027 * Now divide it up into 9K pieces and save the addresses
1028 * in an array. Note that we play an evil trick here by using
1029 * the first few bytes in the buffer to hold the the address
1030 * of the softc structure for this interface. This is because
1031 * sk_jfree() needs it, but it is called by the mbuf management
1032 * code which will not pass it to us explicitly.
1034 ptr = sc_if->sk_cdata.sk_jumbo_buf;
1035 for (i = 0; i < SK_JSLOTS; i++) {
1037 aptr = (u_int64_t **)ptr;
1038 aptr[0] = (u_int64_t *)sc_if;
1039 ptr += sizeof(u_int64_t);
1040 sc_if->sk_cdata.sk_jslots[i].sk_buf = ptr;
1041 sc_if->sk_cdata.sk_jslots[i].sk_inuse = 0;
1043 entry = malloc(sizeof(struct sk_jpool_entry),
1044 M_DEVBUF, M_WAITOK);
1045 if (entry == NULL) {
1046 free(sc_if->sk_cdata.sk_jumbo_buf, M_DEVBUF);
1047 sc_if->sk_cdata.sk_jumbo_buf = NULL;
1048 printf("sk%d: no memory for jumbo "
1049 "buffer queue!\n", sc_if->sk_unit);
1053 SLIST_INSERT_HEAD(&sc_if->sk_jfree_listhead,
1054 entry, jpool_entries);
1061 * Allocate a jumbo buffer.
1063 static void *sk_jalloc(sc_if)
1064 struct sk_if_softc *sc_if;
1066 struct sk_jpool_entry *entry;
1068 entry = SLIST_FIRST(&sc_if->sk_jfree_listhead);
1070 if (entry == NULL) {
1072 printf("sk%d: no free jumbo buffers\n", sc_if->sk_unit);
1077 SLIST_REMOVE_HEAD(&sc_if->sk_jfree_listhead, jpool_entries);
1078 SLIST_INSERT_HEAD(&sc_if->sk_jinuse_listhead, entry, jpool_entries);
1079 sc_if->sk_cdata.sk_jslots[entry->slot].sk_inuse = 1;
1080 return(sc_if->sk_cdata.sk_jslots[entry->slot].sk_buf);
1084 * Adjust usage count on a jumbo buffer. In general this doesn't
1085 * get used much because our jumbo buffers don't get passed around
1086 * a lot, but it's implemented for correctness.
1088 static void sk_jref(buf, size)
1092 struct sk_if_softc *sc_if;
1096 /* Extract the softc struct pointer. */
1097 aptr = (u_int64_t **)(buf - sizeof(u_int64_t));
1098 sc_if = (struct sk_if_softc *)(aptr[0]);
1101 panic("sk_jref: can't find softc pointer!");
1103 if (size != SK_MCLBYTES)
1104 panic("sk_jref: adjusting refcount of buf of wrong size!");
1106 /* calculate the slot this buffer belongs to */
1108 i = ((vm_offset_t)aptr
1109 - (vm_offset_t)sc_if->sk_cdata.sk_jumbo_buf) / SK_JLEN;
1111 if ((i < 0) || (i >= SK_JSLOTS))
1112 panic("sk_jref: asked to reference buffer "
1113 "that we don't manage!");
1114 else if (sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0)
1115 panic("sk_jref: buffer already free!");
1117 sc_if->sk_cdata.sk_jslots[i].sk_inuse++;
1123 * Release a jumbo buffer.
1125 static void sk_jfree(buf, size)
1129 struct sk_if_softc *sc_if;
1132 struct sk_jpool_entry *entry;
1134 /* Extract the softc struct pointer. */
1135 aptr = (u_int64_t **)(buf - sizeof(u_int64_t));
1136 sc_if = (struct sk_if_softc *)(aptr[0]);
1139 panic("sk_jfree: can't find softc pointer!");
1141 if (size != SK_MCLBYTES)
1142 panic("sk_jfree: freeing buffer of wrong size!");
1144 /* calculate the slot this buffer belongs to */
1146 i = ((vm_offset_t)aptr
1147 - (vm_offset_t)sc_if->sk_cdata.sk_jumbo_buf) / SK_JLEN;
1149 if ((i < 0) || (i >= SK_JSLOTS))
1150 panic("sk_jfree: asked to free buffer that we don't manage!");
1151 else if (sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0)
1152 panic("sk_jfree: buffer already free!");
1154 sc_if->sk_cdata.sk_jslots[i].sk_inuse--;
1155 if(sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0) {
1156 entry = SLIST_FIRST(&sc_if->sk_jinuse_listhead);
1158 panic("sk_jfree: buffer not in use!");
1160 SLIST_REMOVE_HEAD(&sc_if->sk_jinuse_listhead,
1162 SLIST_INSERT_HEAD(&sc_if->sk_jfree_listhead,
1163 entry, jpool_entries);
1171 * Set media options.
1173 static int sk_ifmedia_upd(ifp)
1176 struct sk_if_softc *sc_if = ifp->if_softc;
1177 struct mii_data *mii;
1179 mii = device_get_softc(sc_if->sk_miibus);
1187 * Report current media status.
1189 static void sk_ifmedia_sts(ifp, ifmr)
1191 struct ifmediareq *ifmr;
1193 struct sk_if_softc *sc_if;
1194 struct mii_data *mii;
1196 sc_if = ifp->if_softc;
1197 mii = device_get_softc(sc_if->sk_miibus);
1200 ifmr->ifm_active = mii->mii_media_active;
1201 ifmr->ifm_status = mii->mii_media_status;
1206 static int sk_ioctl(ifp, command, data, cr)
1212 struct sk_if_softc *sc_if = ifp->if_softc;
1213 struct ifreq *ifr = (struct ifreq *) data;
1215 struct mii_data *mii;
1222 error = ether_ioctl(ifp, command, data);
1225 if (ifr->ifr_mtu > SK_JUMBO_MTU)
1228 ifp->if_mtu = ifr->ifr_mtu;
1233 if (ifp->if_flags & IFF_UP) {
1234 if (ifp->if_flags & IFF_RUNNING) {
1235 if ((ifp->if_flags ^ sc_if->sk_if_flags)
1237 sk_setpromisc(sc_if);
1243 if (ifp->if_flags & IFF_RUNNING)
1246 sc_if->sk_if_flags = ifp->if_flags;
1256 mii = device_get_softc(sc_if->sk_miibus);
1257 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
1270 * Probe for a SysKonnect GEnesis chip. Check the PCI vendor and device
1271 * IDs against our list and return a device name if we find a match.
1273 static int skc_probe(dev)
1276 struct sk_softc *sc;
1277 struct sk_type *t = sk_devs;
1279 sc = device_get_softc(dev);
1281 while(t->sk_name != NULL) {
1282 if ((pci_get_vendor(dev) == t->sk_vid) &&
1283 (pci_get_device(dev) == t->sk_did)) {
1284 device_set_desc(dev, t->sk_name);
1294 * Force the GEnesis into reset, then bring it out of reset.
1296 static void sk_reset(sc)
1297 struct sk_softc *sc;
1299 CSR_WRITE_2(sc, SK_CSR, SK_CSR_SW_RESET);
1300 CSR_WRITE_2(sc, SK_CSR, SK_CSR_MASTER_RESET);
1301 if (sc->sk_type == SK_YUKON)
1302 CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_SET);
1305 CSR_WRITE_2(sc, SK_CSR, SK_CSR_SW_UNRESET);
1307 CSR_WRITE_2(sc, SK_CSR, SK_CSR_MASTER_UNRESET);
1308 if (sc->sk_type == SK_YUKON)
1309 CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_CLEAR);
1311 if (sc->sk_type == SK_GENESIS) {
1312 /* Configure packet arbiter */
1313 sk_win_write_2(sc, SK_PKTARB_CTL, SK_PKTARBCTL_UNRESET);
1314 sk_win_write_2(sc, SK_RXPA1_TINIT, SK_PKTARB_TIMEOUT);
1315 sk_win_write_2(sc, SK_TXPA1_TINIT, SK_PKTARB_TIMEOUT);
1316 sk_win_write_2(sc, SK_RXPA2_TINIT, SK_PKTARB_TIMEOUT);
1317 sk_win_write_2(sc, SK_TXPA2_TINIT, SK_PKTARB_TIMEOUT);
1320 /* Enable RAM interface */
1321 sk_win_write_4(sc, SK_RAMCTL, SK_RAMCTL_UNRESET);
1324 * Configure interrupt moderation. The moderation timer
1325 * defers interrupts specified in the interrupt moderation
1326 * timer mask based on the timeout specified in the interrupt
1327 * moderation timer init register. Each bit in the timer
1328 * register represents 18.825ns, so to specify a timeout in
1329 * microseconds, we have to multiply by 54.
1331 sk_win_write_4(sc, SK_IMTIMERINIT, SK_IM_USECS(200));
1332 sk_win_write_4(sc, SK_IMMR, SK_ISR_TX1_S_EOF|SK_ISR_TX2_S_EOF|
1333 SK_ISR_RX1_EOF|SK_ISR_RX2_EOF);
1334 sk_win_write_1(sc, SK_IMTIMERCTL, SK_IMCTL_START);
1339 static int sk_probe(dev)
1342 struct sk_softc *sc;
1344 sc = device_get_softc(device_get_parent(dev));
1347 * Not much to do here. We always know there will be
1348 * at least one XMAC present, and if there are two,
1349 * skc_attach() will create a second device instance
1352 switch (sc->sk_type) {
1354 device_set_desc(dev, "XaQti Corp. XMAC II");
1357 device_set_desc(dev, "Marvell Semiconductor, Inc. Yukon");
1365 * Each XMAC chip is attached as a separate logical IP interface.
1366 * Single port cards will have only one logical interface of course.
1368 static int sk_attach(dev)
1371 struct sk_softc *sc;
1372 struct sk_if_softc *sc_if;
1379 sc_if = device_get_softc(dev);
1380 sc = device_get_softc(device_get_parent(dev));
1381 port = *(int *)device_get_ivars(dev);
1382 free(device_get_ivars(dev), M_DEVBUF);
1383 device_set_ivars(dev, NULL);
1384 sc_if->sk_dev = dev;
1386 bzero((char *)sc_if, sizeof(struct sk_if_softc));
1388 sc_if->sk_dev = dev;
1389 sc_if->sk_unit = device_get_unit(dev);
1390 sc_if->sk_port = port;
1391 sc_if->sk_softc = sc;
1392 sc->sk_if[port] = sc_if;
1393 if (port == SK_PORT_A)
1394 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR0;
1395 if (port == SK_PORT_B)
1396 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR1;
1399 * Get station address for this interface. Note that
1400 * dual port cards actually come with three station
1401 * addresses: one for each port, plus an extra. The
1402 * extra one is used by the SysKonnect driver software
1403 * as a 'virtual' station address for when both ports
1404 * are operating in failover mode. Currently we don't
1405 * use this extra address.
1407 for (i = 0; i < ETHER_ADDR_LEN; i++)
1408 sc_if->arpcom.ac_enaddr[i] =
1409 sk_win_read_1(sc, SK_MAC0_0 + (port * 8) + i);
1412 * Set up RAM buffer addresses. The NIC will have a certain
1413 * amount of SRAM on it, somewhere between 512K and 2MB. We
1414 * need to divide this up a) between the transmitter and
1415 * receiver and b) between the two XMACs, if this is a
1416 * dual port NIC. Our algotithm is to divide up the memory
1417 * evenly so that everyone gets a fair share.
1419 if (sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC) {
1420 u_int32_t chunk, val;
1422 chunk = sc->sk_ramsize / 2;
1423 val = sc->sk_rboff / sizeof(u_int64_t);
1424 sc_if->sk_rx_ramstart = val;
1425 val += (chunk / sizeof(u_int64_t));
1426 sc_if->sk_rx_ramend = val - 1;
1427 sc_if->sk_tx_ramstart = val;
1428 val += (chunk / sizeof(u_int64_t));
1429 sc_if->sk_tx_ramend = val - 1;
1431 u_int32_t chunk, val;
1433 chunk = sc->sk_ramsize / 4;
1434 val = (sc->sk_rboff + (chunk * 2 * sc_if->sk_port)) /
1436 sc_if->sk_rx_ramstart = val;
1437 val += (chunk / sizeof(u_int64_t));
1438 sc_if->sk_rx_ramend = val - 1;
1439 sc_if->sk_tx_ramstart = val;
1440 val += (chunk / sizeof(u_int64_t));
1441 sc_if->sk_tx_ramend = val - 1;
1444 /* Read and save PHY type and set PHY address */
1445 sc_if->sk_phytype = sk_win_read_1(sc, SK_EPROM1) & 0xF;
1446 switch(sc_if->sk_phytype) {
1447 case SK_PHYTYPE_XMAC:
1448 sc_if->sk_phyaddr = SK_PHYADDR_XMAC;
1450 case SK_PHYTYPE_BCOM:
1451 sc_if->sk_phyaddr = SK_PHYADDR_BCOM;
1453 case SK_PHYTYPE_MARV_COPPER:
1454 sc_if->sk_phyaddr = SK_PHYADDR_MARV;
1457 printf("skc%d: unsupported PHY type: %d\n",
1458 sc->sk_unit, sc_if->sk_phytype);
1462 /* Allocate the descriptor queues. */
1463 sc_if->sk_rdata = contigmalloc(sizeof(struct sk_ring_data), M_DEVBUF,
1464 M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
1466 if (sc_if->sk_rdata == NULL) {
1467 printf("sk%d: no memory for list buffers!\n", sc_if->sk_unit);
1468 sc->sk_if[port] = NULL;
1472 bzero(sc_if->sk_rdata, sizeof(struct sk_ring_data));
1474 /* Try to allocate memory for jumbo buffers. */
1475 if (sk_alloc_jumbo_mem(sc_if)) {
1476 printf("sk%d: jumbo buffer allocation failed\n",
1478 contigfree(sc_if->sk_rdata,
1479 sizeof(struct sk_ring_data), M_DEVBUF);
1480 sc->sk_if[port] = NULL;
1484 ifp = &sc_if->arpcom.ac_if;
1485 ifp->if_softc = sc_if;
1486 if_initname(ifp, "sk", sc_if->sk_unit);
1487 ifp->if_mtu = ETHERMTU;
1488 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
1489 ifp->if_ioctl = sk_ioctl;
1490 ifp->if_start = sk_start;
1491 ifp->if_watchdog = sk_watchdog;
1492 ifp->if_init = sk_init;
1493 ifp->if_baudrate = 1000000000;
1494 ifp->if_snd.ifq_maxlen = SK_TX_RING_CNT - 1;
1499 switch (sc->sk_type) {
1501 sk_init_xmac(sc_if);
1504 sk_init_yukon(sc_if);
1508 if (mii_phy_probe(dev, &sc_if->sk_miibus,
1509 sk_ifmedia_upd, sk_ifmedia_sts)) {
1510 printf("skc%d: no PHY found!\n", sc_if->sk_unit);
1511 contigfree(sc_if->sk_cdata.sk_jumbo_buf, SK_JMEM,
1513 contigfree(sc_if->sk_rdata,
1514 sizeof(struct sk_ring_data), M_DEVBUF);
1519 * Call MI attach routine.
1521 ether_ifattach(ifp, sc_if->arpcom.ac_enaddr);
1522 callout_handle_init(&sc_if->sk_tick_ch);
1528 * Attach the interface. Allocate softc structures, do ifmedia
1529 * setup and ethernet/BPF attach.
1531 static int skc_attach(dev)
1536 struct sk_softc *sc;
1537 int unit, error = 0, rid, *port;
1541 sc = device_get_softc(dev);
1542 unit = device_get_unit(dev);
1543 bzero(sc, sizeof(struct sk_softc));
1544 switch (pci_get_device(dev)) {
1545 case DEVICEID_SK_V1:
1546 sc->sk_type = SK_GENESIS;
1548 case DEVICEID_SK_V2:
1549 case DEVICEID_3COM_3C940:
1550 sc->sk_type = SK_YUKON;
1555 * Handle power management nonsense.
1557 command = pci_read_config(dev, SK_PCI_CAPID, 4) & 0x000000FF;
1558 if (command == 0x01) {
1559 command = pci_read_config(dev, SK_PCI_PWRMGMTCTRL, 4);
1560 if (command & SK_PSTATE_MASK) {
1561 u_int32_t iobase, membase, irq;
1563 /* Save important PCI config data. */
1564 iobase = pci_read_config(dev, SK_PCI_LOIO, 4);
1565 membase = pci_read_config(dev, SK_PCI_LOMEM, 4);
1566 irq = pci_read_config(dev, SK_PCI_INTLINE, 4);
1568 /* Reset the power state. */
1569 printf("skc%d: chip is in D%d power mode "
1570 "-- setting to D0\n", unit, command & SK_PSTATE_MASK);
1571 command &= 0xFFFFFFFC;
1572 pci_write_config(dev, SK_PCI_PWRMGMTCTRL, command, 4);
1574 /* Restore PCI config data. */
1575 pci_write_config(dev, SK_PCI_LOIO, iobase, 4);
1576 pci_write_config(dev, SK_PCI_LOMEM, membase, 4);
1577 pci_write_config(dev, SK_PCI_INTLINE, irq, 4);
1582 * Map control/status registers.
1584 command = pci_read_config(dev, PCIR_COMMAND, 4);
1585 command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
1586 pci_write_config(dev, PCIR_COMMAND, command, 4);
1587 command = pci_read_config(dev, PCIR_COMMAND, 4);
1589 #ifdef SK_USEIOSPACE
1590 if (!(command & PCIM_CMD_PORTEN)) {
1591 printf("skc%d: failed to enable I/O ports!\n", unit);
1596 if (!(command & PCIM_CMD_MEMEN)) {
1597 printf("skc%d: failed to enable memory mapping!\n", unit);
1604 sc->sk_res = bus_alloc_resource(dev, SK_RES, &rid,
1605 0, ~0, 1, RF_ACTIVE);
1607 if (sc->sk_res == NULL) {
1608 printf("sk%d: couldn't map ports/memory\n", unit);
1613 sc->sk_btag = rman_get_bustag(sc->sk_res);
1614 sc->sk_bhandle = rman_get_bushandle(sc->sk_res);
1616 /* Allocate interrupt */
1618 sc->sk_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
1619 RF_SHAREABLE | RF_ACTIVE);
1621 if (sc->sk_irq == NULL) {
1622 printf("skc%d: couldn't map interrupt\n", unit);
1623 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1628 error = bus_setup_intr(dev, sc->sk_irq, INTR_TYPE_NET,
1629 sk_intr, sc, &sc->sk_intrhand);
1632 printf("skc%d: couldn't set up irq\n", unit);
1633 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1634 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1638 /* Reset the adapter. */
1643 /* Read and save vital product data from EEPROM. */
1646 if (sc->sk_type == SK_GENESIS) {
1647 /* Read and save RAM size and RAMbuffer offset */
1648 switch(sk_win_read_1(sc, SK_EPROM0)) {
1649 case SK_RAMSIZE_512K_64:
1650 sc->sk_ramsize = 0x80000;
1651 sc->sk_rboff = SK_RBOFF_0;
1653 case SK_RAMSIZE_1024K_64:
1654 sc->sk_ramsize = 0x100000;
1655 sc->sk_rboff = SK_RBOFF_80000;
1657 case SK_RAMSIZE_1024K_128:
1658 sc->sk_ramsize = 0x100000;
1659 sc->sk_rboff = SK_RBOFF_0;
1661 case SK_RAMSIZE_2048K_128:
1662 sc->sk_ramsize = 0x200000;
1663 sc->sk_rboff = SK_RBOFF_0;
1666 printf("skc%d: unknown ram size: %d\n",
1667 sc->sk_unit, sk_win_read_1(sc, SK_EPROM0));
1668 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand);
1669 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1670 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1676 sc->sk_ramsize = 0x20000;
1677 sc->sk_rboff = SK_RBOFF_0;
1680 /* Read and save physical media type */
1681 switch(sk_win_read_1(sc, SK_PMDTYPE)) {
1682 case SK_PMD_1000BASESX:
1683 sc->sk_pmd = IFM_1000_SX;
1685 case SK_PMD_1000BASELX:
1686 sc->sk_pmd = IFM_1000_LX;
1688 case SK_PMD_1000BASECX:
1689 sc->sk_pmd = IFM_1000_CX;
1691 case SK_PMD_1000BASETX:
1692 sc->sk_pmd = IFM_1000_TX;
1695 printf("skc%d: unknown media type: 0x%x\n",
1696 sc->sk_unit, sk_win_read_1(sc, SK_PMDTYPE));
1697 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand);
1698 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1699 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1704 /* Announce the product name. */
1705 printf("skc%d: %s\n", sc->sk_unit, sc->sk_vpd_prodname);
1706 sc->sk_devs[SK_PORT_A] = device_add_child(dev, "sk", -1);
1707 port = malloc(sizeof(int), M_DEVBUF, M_WAITOK);
1709 device_set_ivars(sc->sk_devs[SK_PORT_A], port);
1711 if (!(sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC)) {
1712 sc->sk_devs[SK_PORT_B] = device_add_child(dev, "sk", -1);
1713 port = malloc(sizeof(int), M_DEVBUF, M_WAITOK);
1715 device_set_ivars(sc->sk_devs[SK_PORT_B], port);
1718 /* Turn on the 'driver is loaded' LED. */
1719 CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_ON);
1721 bus_generic_attach(dev);
1728 static int sk_detach(dev)
1731 struct sk_softc *sc;
1732 struct sk_if_softc *sc_if;
1738 sc = device_get_softc(device_get_parent(dev));
1739 sc_if = device_get_softc(dev);
1740 ifp = &sc_if->arpcom.ac_if;
1742 ether_ifdetach(ifp);
1743 bus_generic_detach(dev);
1744 if (sc_if->sk_miibus != NULL)
1745 device_delete_child(dev, sc_if->sk_miibus);
1746 contigfree(sc_if->sk_cdata.sk_jumbo_buf, SK_JMEM, M_DEVBUF);
1747 contigfree(sc_if->sk_rdata, sizeof(struct sk_ring_data), M_DEVBUF);
1752 static int skc_detach(dev)
1755 struct sk_softc *sc;
1760 sc = device_get_softc(dev);
1762 bus_generic_detach(dev);
1763 if (sc->sk_devs[SK_PORT_A] != NULL)
1764 device_delete_child(dev, sc->sk_devs[SK_PORT_A]);
1765 if (sc->sk_devs[SK_PORT_B] != NULL)
1766 device_delete_child(dev, sc->sk_devs[SK_PORT_B]);
1768 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand);
1769 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1770 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1777 static int sk_encap(sc_if, m_head, txidx)
1778 struct sk_if_softc *sc_if;
1779 struct mbuf *m_head;
1782 struct sk_tx_desc *f = NULL;
1784 u_int32_t frag, cur, cnt = 0;
1787 cur = frag = *txidx;
1790 * Start packing the mbufs in this chain into
1791 * the fragment pointers. Stop when we run out
1792 * of fragments or hit the end of the mbuf chain.
1794 for (m = m_head; m != NULL; m = m->m_next) {
1795 if (m->m_len != 0) {
1796 if ((SK_TX_RING_CNT -
1797 (sc_if->sk_cdata.sk_tx_cnt + cnt)) < 2)
1799 f = &sc_if->sk_rdata->sk_tx_ring[frag];
1800 f->sk_data_lo = vtophys(mtod(m, vm_offset_t));
1801 f->sk_ctl = m->m_len | SK_OPCODE_DEFAULT;
1803 f->sk_ctl |= SK_TXCTL_FIRSTFRAG;
1805 f->sk_ctl |= SK_TXCTL_OWN;
1807 SK_INC(frag, SK_TX_RING_CNT);
1815 sc_if->sk_rdata->sk_tx_ring[cur].sk_ctl |=
1816 SK_TXCTL_LASTFRAG|SK_TXCTL_EOF_INTR;
1817 sc_if->sk_cdata.sk_tx_chain[cur].sk_mbuf = m_head;
1818 sc_if->sk_rdata->sk_tx_ring[*txidx].sk_ctl |= SK_TXCTL_OWN;
1819 sc_if->sk_cdata.sk_tx_cnt += cnt;
1826 static void sk_start(ifp)
1829 struct sk_softc *sc;
1830 struct sk_if_softc *sc_if;
1831 struct mbuf *m_head = NULL;
1834 sc_if = ifp->if_softc;
1835 sc = sc_if->sk_softc;
1837 idx = sc_if->sk_cdata.sk_tx_prod;
1839 while(sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf == NULL) {
1840 IF_DEQUEUE(&ifp->if_snd, m_head);
1845 * Pack the data into the transmit ring. If we
1846 * don't have room, set the OACTIVE flag and wait
1847 * for the NIC to drain the ring.
1849 if (sk_encap(sc_if, m_head, &idx)) {
1850 IF_PREPEND(&ifp->if_snd, m_head);
1851 ifp->if_flags |= IFF_OACTIVE;
1856 * If there's a BPF listener, bounce a copy of this frame
1860 bpf_mtap(ifp, m_head);
1864 sc_if->sk_cdata.sk_tx_prod = idx;
1865 CSR_WRITE_4(sc, sc_if->sk_tx_bmu, SK_TXBMU_TX_START);
1867 /* Set a timeout in case the chip goes out to lunch. */
1874 static void sk_watchdog(ifp)
1877 struct sk_if_softc *sc_if;
1879 sc_if = ifp->if_softc;
1881 printf("sk%d: watchdog timeout\n", sc_if->sk_unit);
1887 static void skc_shutdown(dev)
1890 struct sk_softc *sc;
1892 sc = device_get_softc(dev);
1894 /* Turn off the 'driver is loaded' LED. */
1895 CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_OFF);
1898 * Reset the GEnesis controller. Doing this should also
1899 * assert the resets on the attached XMAC(s).
1906 static void sk_rxeof(sc_if)
1907 struct sk_if_softc *sc_if;
1911 struct sk_chain *cur_rx;
1916 ifp = &sc_if->arpcom.ac_if;
1917 i = sc_if->sk_cdata.sk_rx_prod;
1918 cur_rx = &sc_if->sk_cdata.sk_rx_chain[i];
1920 while(!(sc_if->sk_rdata->sk_rx_ring[i].sk_ctl & SK_RXCTL_OWN)) {
1922 cur_rx = &sc_if->sk_cdata.sk_rx_chain[i];
1923 rxstat = sc_if->sk_rdata->sk_rx_ring[i].sk_xmac_rxstat;
1924 m = cur_rx->sk_mbuf;
1925 cur_rx->sk_mbuf = NULL;
1926 total_len = SK_RXBYTES(sc_if->sk_rdata->sk_rx_ring[i].sk_ctl);
1927 SK_INC(i, SK_RX_RING_CNT);
1929 if (rxstat & XM_RXSTAT_ERRFRAME) {
1931 sk_newbuf(sc_if, cur_rx, m);
1936 * Try to allocate a new jumbo buffer. If that
1937 * fails, copy the packet to mbufs and put the
1938 * jumbo buffer back in the ring so it can be
1939 * re-used. If allocating mbufs fails, then we
1940 * have to drop the packet.
1942 if (sk_newbuf(sc_if, cur_rx, NULL) == ENOBUFS) {
1944 m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
1945 total_len + ETHER_ALIGN, 0, ifp, NULL);
1946 sk_newbuf(sc_if, cur_rx, m);
1948 printf("sk%d: no receive buffers "
1949 "available -- packet dropped!\n",
1954 m_adj(m0, ETHER_ALIGN);
1957 m->m_pkthdr.rcvif = ifp;
1958 m->m_pkthdr.len = m->m_len = total_len;
1962 (*ifp->if_input)(ifp, m);
1965 sc_if->sk_cdata.sk_rx_prod = i;
1970 static void sk_txeof(sc_if)
1971 struct sk_if_softc *sc_if;
1973 struct sk_tx_desc *cur_tx = NULL;
1977 ifp = &sc_if->arpcom.ac_if;
1980 * Go through our tx ring and free mbufs for those
1981 * frames that have been sent.
1983 idx = sc_if->sk_cdata.sk_tx_cons;
1984 while(idx != sc_if->sk_cdata.sk_tx_prod) {
1985 cur_tx = &sc_if->sk_rdata->sk_tx_ring[idx];
1986 if (cur_tx->sk_ctl & SK_TXCTL_OWN)
1988 if (cur_tx->sk_ctl & SK_TXCTL_LASTFRAG)
1990 if (sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf != NULL) {
1991 m_freem(sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf);
1992 sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf = NULL;
1994 sc_if->sk_cdata.sk_tx_cnt--;
1995 SK_INC(idx, SK_TX_RING_CNT);
1999 sc_if->sk_cdata.sk_tx_cons = idx;
2002 ifp->if_flags &= ~IFF_OACTIVE;
2007 static void sk_tick(xsc_if)
2010 struct sk_if_softc *sc_if;
2011 struct mii_data *mii;
2016 ifp = &sc_if->arpcom.ac_if;
2017 mii = device_get_softc(sc_if->sk_miibus);
2019 if (!(ifp->if_flags & IFF_UP))
2022 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) {
2023 sk_intr_bcom(sc_if);
2028 * According to SysKonnect, the correct way to verify that
2029 * the link has come back up is to poll bit 0 of the GPIO
2030 * register three times. This pin has the signal from the
2031 * link_sync pin connected to it; if we read the same link
2032 * state 3 times in a row, we know the link is up.
2034 for (i = 0; i < 3; i++) {
2035 if (SK_XM_READ_2(sc_if, XM_GPIO) & XM_GPIO_GP0_SET)
2040 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz);
2044 /* Turn the GP0 interrupt back on. */
2045 SK_XM_CLRBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET);
2046 SK_XM_READ_2(sc_if, XM_ISR);
2049 untimeout(sk_tick, sc_if, sc_if->sk_tick_ch);
2054 static void sk_intr_bcom(sc_if)
2055 struct sk_if_softc *sc_if;
2057 struct sk_softc *sc;
2058 struct mii_data *mii;
2062 sc = sc_if->sk_softc;
2063 mii = device_get_softc(sc_if->sk_miibus);
2064 ifp = &sc_if->arpcom.ac_if;
2066 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB);
2069 * Read the PHY interrupt register to make sure
2070 * we clear any pending interrupts.
2072 status = sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM, BRGPHY_MII_ISR);
2074 if (!(ifp->if_flags & IFF_RUNNING)) {
2075 sk_init_xmac(sc_if);
2079 if (status & (BRGPHY_ISR_LNK_CHG|BRGPHY_ISR_AN_PR)) {
2081 lstat = sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM,
2084 if (!(lstat & BRGPHY_AUXSTS_LINK) && sc_if->sk_link) {
2086 /* Turn off the link LED. */
2087 SK_IF_WRITE_1(sc_if, 0,
2088 SK_LINKLED1_CTL, SK_LINKLED_OFF);
2090 } else if (status & BRGPHY_ISR_LNK_CHG) {
2091 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2092 BRGPHY_MII_IMR, 0xFF00);
2095 /* Turn on the link LED. */
2096 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL,
2097 SK_LINKLED_ON|SK_LINKLED_LINKSYNC_OFF|
2098 SK_LINKLED_BLINK_OFF);
2102 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz);
2106 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB);
2111 static void sk_intr_xmac(sc_if)
2112 struct sk_if_softc *sc_if;
2114 struct sk_softc *sc;
2116 struct mii_data *mii;
2118 sc = sc_if->sk_softc;
2119 mii = device_get_softc(sc_if->sk_miibus);
2120 status = SK_XM_READ_2(sc_if, XM_ISR);
2123 * Link has gone down. Start MII tick timeout to
2124 * watch for link resync.
2126 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC) {
2127 if (status & XM_ISR_GP0_SET) {
2128 SK_XM_SETBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET);
2129 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz);
2132 if (status & XM_ISR_AUTONEG_DONE) {
2133 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz);
2137 if (status & XM_IMR_TX_UNDERRUN)
2138 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_TXFIFO);
2140 if (status & XM_IMR_RX_OVERRUN)
2141 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_RXFIFO);
2143 status = SK_XM_READ_2(sc_if, XM_ISR);
2148 static void sk_intr_yukon(sc_if)
2149 struct sk_if_softc *sc_if;
2153 status = SK_IF_READ_2(sc_if, 0, SK_GMAC_ISR);
2158 static void sk_intr(xsc)
2161 struct sk_softc *sc = xsc;
2162 struct sk_if_softc *sc_if0 = NULL, *sc_if1 = NULL;
2163 struct ifnet *ifp0 = NULL, *ifp1 = NULL;
2166 sc_if0 = sc->sk_if[SK_PORT_A];
2167 sc_if1 = sc->sk_if[SK_PORT_B];
2170 ifp0 = &sc_if0->arpcom.ac_if;
2172 ifp1 = &sc_if1->arpcom.ac_if;
2175 status = CSR_READ_4(sc, SK_ISSR);
2176 if (!(status & sc->sk_intrmask))
2179 /* Handle receive interrupts first. */
2180 if (status & SK_ISR_RX1_EOF) {
2182 CSR_WRITE_4(sc, SK_BMU_RX_CSR0,
2183 SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START);
2185 if (status & SK_ISR_RX2_EOF) {
2187 CSR_WRITE_4(sc, SK_BMU_RX_CSR1,
2188 SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START);
2191 /* Then transmit interrupts. */
2192 if (status & SK_ISR_TX1_S_EOF) {
2194 CSR_WRITE_4(sc, SK_BMU_TXS_CSR0,
2195 SK_TXBMU_CLR_IRQ_EOF);
2197 if (status & SK_ISR_TX2_S_EOF) {
2199 CSR_WRITE_4(sc, SK_BMU_TXS_CSR1,
2200 SK_TXBMU_CLR_IRQ_EOF);
2203 /* Then MAC interrupts. */
2204 if (status & SK_ISR_MAC1 && ifp0->if_flags & IFF_RUNNING) {
2205 if (sc->sk_type == SK_GENESIS)
2206 sk_intr_xmac(sc_if0);
2208 sk_intr_yukon(sc_if0);
2211 if (status & SK_ISR_MAC2 && ifp1->if_flags & IFF_RUNNING) {
2212 if (sc->sk_type == SK_GENESIS)
2213 sk_intr_xmac(sc_if1);
2215 sk_intr_yukon(sc_if0);
2218 if (status & SK_ISR_EXTERNAL_REG) {
2220 sc_if0->sk_phytype == SK_PHYTYPE_BCOM)
2221 sk_intr_bcom(sc_if0);
2223 sc_if1->sk_phytype == SK_PHYTYPE_BCOM)
2224 sk_intr_bcom(sc_if1);
2228 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
2230 if (ifp0 != NULL && ifp0->if_snd.ifq_head != NULL)
2232 if (ifp1 != NULL && ifp1->if_snd.ifq_head != NULL)
2238 static void sk_init_xmac(sc_if)
2239 struct sk_if_softc *sc_if;
2241 struct sk_softc *sc;
2243 struct sk_bcom_hack bhack[] = {
2244 { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 },
2245 { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 },
2246 { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 },
2249 sc = sc_if->sk_softc;
2250 ifp = &sc_if->arpcom.ac_if;
2252 /* Unreset the XMAC. */
2253 SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_UNRESET);
2256 /* Reset the XMAC's internal state. */
2257 SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC);
2259 /* Save the XMAC II revision */
2260 sc_if->sk_xmac_rev = XM_XMAC_REV(SK_XM_READ_4(sc_if, XM_DEVID));
2263 * Perform additional initialization for external PHYs,
2264 * namely for the 1000baseTX cards that use the XMAC's
2267 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) {
2271 /* Take PHY out of reset. */
2272 val = sk_win_read_4(sc, SK_GPIO);
2273 if (sc_if->sk_port == SK_PORT_A)
2274 val |= SK_GPIO_DIR0|SK_GPIO_DAT0;
2276 val |= SK_GPIO_DIR2|SK_GPIO_DAT2;
2277 sk_win_write_4(sc, SK_GPIO, val);
2279 /* Enable GMII mode on the XMAC. */
2280 SK_XM_SETBIT_2(sc_if, XM_HWCFG, XM_HWCFG_GMIIMODE);
2282 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2283 BRGPHY_MII_BMCR, BRGPHY_BMCR_RESET);
2285 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2286 BRGPHY_MII_IMR, 0xFFF0);
2289 * Early versions of the BCM5400 apparently have
2290 * a bug that requires them to have their reserved
2291 * registers initialized to some magic values. I don't
2292 * know what the numbers do, I'm just the messenger.
2294 if (sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM, 0x03)
2296 while(bhack[i].reg) {
2297 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2298 bhack[i].reg, bhack[i].val);
2304 /* Set station address */
2305 SK_XM_WRITE_2(sc_if, XM_PAR0,
2306 *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[0]));
2307 SK_XM_WRITE_2(sc_if, XM_PAR1,
2308 *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[2]));
2309 SK_XM_WRITE_2(sc_if, XM_PAR2,
2310 *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[4]));
2311 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_STATION);
2313 if (ifp->if_flags & IFF_BROADCAST) {
2314 SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD);
2316 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD);
2319 /* We don't need the FCS appended to the packet. */
2320 SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_STRIPFCS);
2322 /* We want short frames padded to 60 bytes. */
2323 SK_XM_SETBIT_2(sc_if, XM_TXCMD, XM_TXCMD_AUTOPAD);
2326 * Enable the reception of all error frames. This is is
2327 * a necessary evil due to the design of the XMAC. The
2328 * XMAC's receive FIFO is only 8K in size, however jumbo
2329 * frames can be up to 9000 bytes in length. When bad
2330 * frame filtering is enabled, the XMAC's RX FIFO operates
2331 * in 'store and forward' mode. For this to work, the
2332 * entire frame has to fit into the FIFO, but that means
2333 * that jumbo frames larger than 8192 bytes will be
2334 * truncated. Disabling all bad frame filtering causes
2335 * the RX FIFO to operate in streaming mode, in which
2336 * case the XMAC will start transfering frames out of the
2337 * RX FIFO as soon as the FIFO threshold is reached.
2339 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_BADFRAMES|
2340 XM_MODE_RX_GIANTS|XM_MODE_RX_RUNTS|XM_MODE_RX_CRCERRS|
2341 XM_MODE_RX_INRANGELEN);
2343 if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN))
2344 SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK);
2346 SK_XM_CLRBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK);
2349 * Bump up the transmit threshold. This helps hold off transmit
2350 * underruns when we're blasting traffic from both ports at once.
2352 SK_XM_WRITE_2(sc_if, XM_TX_REQTHRESH, SK_XM_TX_FIFOTHRESH);
2354 /* Set promiscuous mode */
2355 sk_setpromisc(sc_if);
2357 /* Set multicast filter */
2360 /* Clear and enable interrupts */
2361 SK_XM_READ_2(sc_if, XM_ISR);
2362 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC)
2363 SK_XM_WRITE_2(sc_if, XM_IMR, XM_INTRS);
2365 SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF);
2367 /* Configure MAC arbiter */
2368 switch(sc_if->sk_xmac_rev) {
2369 case XM_XMAC_REV_B2:
2370 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_B2);
2371 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_B2);
2372 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_B2);
2373 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_B2);
2374 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_B2);
2375 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_B2);
2376 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_B2);
2377 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_B2);
2378 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2);
2380 case XM_XMAC_REV_C1:
2381 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_C1);
2382 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_C1);
2383 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_C1);
2384 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_C1);
2385 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_C1);
2386 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_C1);
2387 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_C1);
2388 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_C1);
2389 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2);
2394 sk_win_write_2(sc, SK_MACARB_CTL,
2395 SK_MACARBCTL_UNRESET|SK_MACARBCTL_FASTOE_OFF);
2402 static void sk_init_yukon(sc_if)
2403 struct sk_if_softc *sc_if;
2409 /* GMAC and GPHY Reset */
2410 SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_SET);
2411 SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET);
2413 SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_CLEAR);
2414 SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET);
2417 phy = SK_GPHY_INT_POL_HI | SK_GPHY_DIS_FC | SK_GPHY_DIS_SLEEP |
2418 SK_GPHY_ENA_XC | SK_GPHY_ANEG_ALL | SK_GPHY_ENA_PAUSE;
2420 switch(sc_if->sk_softc->sk_pmd) {
2423 phy |= SK_GPHY_FIBER;
2428 phy |= SK_GPHY_COPPER;
2432 SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, phy | SK_GPHY_RESET_SET);
2434 SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, phy | SK_GPHY_RESET_CLEAR);
2435 SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_LOOP_OFF |
2436 SK_GMAC_PAUSE_ON | SK_GMAC_RESET_CLEAR);
2438 /* unused read of the interrupt source register */
2439 SK_IF_READ_2(sc_if, 0, SK_GMAC_ISR);
2441 reg = SK_YU_READ_2(sc_if, YUKON_PAR);
2443 /* MIB Counter Clear Mode set */
2444 reg |= YU_PAR_MIB_CLR;
2445 SK_YU_WRITE_2(sc_if, YUKON_PAR, reg);
2447 /* MIB Counter Clear Mode clear */
2448 reg &= ~YU_PAR_MIB_CLR;
2449 SK_YU_WRITE_2(sc_if, YUKON_PAR, reg);
2451 /* receive control reg */
2452 SK_YU_WRITE_2(sc_if, YUKON_RCR, YU_RCR_CRCR);
2454 /* transmit parameter register */
2455 SK_YU_WRITE_2(sc_if, YUKON_TPR, YU_TPR_JAM_LEN(0x3) |
2456 YU_TPR_JAM_IPG(0xb) | YU_TPR_JAM2DATA_IPG(0x1a) );
2458 /* serial mode register */
2459 SK_YU_WRITE_2(sc_if, YUKON_SMR, YU_SMR_DATA_BLIND(0x1c) |
2460 YU_SMR_MFL_VLAN | YU_SMR_IPG_DATA(0x1e));
2462 /* Setup Yukon's address */
2463 for (i = 0; i < 3; i++) {
2464 /* Write Source Address 1 (unicast filter) */
2465 SK_YU_WRITE_2(sc_if, YUKON_SAL1 + i * 4,
2466 sc_if->arpcom.ac_enaddr[i * 2] |
2467 sc_if->arpcom.ac_enaddr[i * 2 + 1] << 8);
2470 for (i = 0; i < 3; i++) {
2471 reg = sk_win_read_2(sc_if->sk_softc,
2472 SK_MAC1_0 + i * 2 + sc_if->sk_port * 8);
2473 SK_YU_WRITE_2(sc_if, YUKON_SAL2 + i * 4, reg);
2476 /* Set promiscuous mode */
2477 sk_setpromisc(sc_if);
2479 /* Set multicast filter */
2482 /* enable interrupt mask for counter overflows */
2483 SK_YU_WRITE_2(sc_if, YUKON_TIMR, 0);
2484 SK_YU_WRITE_2(sc_if, YUKON_RIMR, 0);
2485 SK_YU_WRITE_2(sc_if, YUKON_TRIMR, 0);
2487 /* Configure RX MAC FIFO */
2488 SK_IF_WRITE_1(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_CLEAR);
2489 SK_IF_WRITE_4(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_OPERATION_ON);
2491 /* Configure TX MAC FIFO */
2492 SK_IF_WRITE_1(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_CLEAR);
2493 SK_IF_WRITE_4(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_OPERATION_ON);
2497 * Note that to properly initialize any part of the GEnesis chip,
2498 * you first have to take it out of reset mode.
2500 static void sk_init(xsc)
2503 struct sk_if_softc *sc_if = xsc;
2504 struct sk_softc *sc;
2506 struct mii_data *mii;
2512 ifp = &sc_if->arpcom.ac_if;
2513 sc = sc_if->sk_softc;
2514 mii = device_get_softc(sc_if->sk_miibus);
2516 /* Cancel pending I/O and free all RX/TX buffers. */
2519 if (sc->sk_type == SK_GENESIS) {
2520 /* Configure LINK_SYNC LED */
2521 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_ON);
2522 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL,
2523 SK_LINKLED_LINKSYNC_ON);
2525 /* Configure RX LED */
2526 SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL,
2527 SK_RXLEDCTL_COUNTER_START);
2529 /* Configure TX LED */
2530 SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL,
2531 SK_TXLEDCTL_COUNTER_START);
2534 /* Configure I2C registers */
2536 /* Configure XMAC(s) */
2537 switch (sc->sk_type) {
2539 sk_init_xmac(sc_if);
2542 sk_init_yukon(sc_if);
2547 if (sc->sk_type == SK_GENESIS) {
2548 /* Configure MAC FIFOs */
2549 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_UNRESET);
2550 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_END, SK_FIFO_END);
2551 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_ON);
2553 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_UNRESET);
2554 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_END, SK_FIFO_END);
2555 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_ON);
2558 /* Configure transmit arbiter(s) */
2559 SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL,
2560 SK_TXARCTL_ON|SK_TXARCTL_FSYNC_ON);
2562 /* Configure RAMbuffers */
2563 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_UNRESET);
2564 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_START, sc_if->sk_rx_ramstart);
2565 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_WR_PTR, sc_if->sk_rx_ramstart);
2566 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_RD_PTR, sc_if->sk_rx_ramstart);
2567 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_END, sc_if->sk_rx_ramend);
2568 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_ON);
2570 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_UNRESET);
2571 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_STORENFWD_ON);
2572 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_START, sc_if->sk_tx_ramstart);
2573 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_WR_PTR, sc_if->sk_tx_ramstart);
2574 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_RD_PTR, sc_if->sk_tx_ramstart);
2575 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_END, sc_if->sk_tx_ramend);
2576 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_ON);
2578 /* Configure BMUs */
2579 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_ONLINE);
2580 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_LO,
2581 vtophys(&sc_if->sk_rdata->sk_rx_ring[0]));
2582 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_HI, 0);
2584 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_ONLINE);
2585 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_LO,
2586 vtophys(&sc_if->sk_rdata->sk_tx_ring[0]));
2587 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_HI, 0);
2589 /* Init descriptors */
2590 if (sk_init_rx_ring(sc_if) == ENOBUFS) {
2591 printf("sk%d: initialization failed: no "
2592 "memory for rx buffers\n", sc_if->sk_unit);
2597 sk_init_tx_ring(sc_if);
2599 /* Configure interrupt handling */
2600 CSR_READ_4(sc, SK_ISSR);
2601 if (sc_if->sk_port == SK_PORT_A)
2602 sc->sk_intrmask |= SK_INTRS1;
2604 sc->sk_intrmask |= SK_INTRS2;
2606 sc->sk_intrmask |= SK_ISR_EXTERNAL_REG;
2608 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
2611 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_RX_START);
2613 switch(sc->sk_type) {
2615 /* Enable XMACs TX and RX state machines */
2616 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_IGNPAUSE);
2617 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB);
2620 reg = SK_YU_READ_2(sc_if, YUKON_GPCR);
2621 reg |= YU_GPCR_TXEN | YU_GPCR_RXEN;
2622 reg &= ~(YU_GPCR_SPEED_EN | YU_GPCR_DPLX_EN);
2623 SK_YU_WRITE_2(sc_if, YUKON_GPCR, reg);
2626 ifp->if_flags |= IFF_RUNNING;
2627 ifp->if_flags &= ~IFF_OACTIVE;
2634 static void sk_stop(sc_if)
2635 struct sk_if_softc *sc_if;
2638 struct sk_softc *sc;
2641 sc = sc_if->sk_softc;
2642 ifp = &sc_if->arpcom.ac_if;
2644 untimeout(sk_tick, sc_if, sc_if->sk_tick_ch);
2646 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) {
2649 /* Put PHY back into reset. */
2650 val = sk_win_read_4(sc, SK_GPIO);
2651 if (sc_if->sk_port == SK_PORT_A) {
2652 val |= SK_GPIO_DIR0;
2653 val &= ~SK_GPIO_DAT0;
2655 val |= SK_GPIO_DIR2;
2656 val &= ~SK_GPIO_DAT2;
2658 sk_win_write_4(sc, SK_GPIO, val);
2661 /* Turn off various components of this interface. */
2662 SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC);
2663 switch (sc->sk_type) {
2665 SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_RESET);
2666 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_RESET);
2669 SK_IF_WRITE_1(sc_if,0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_SET);
2670 SK_IF_WRITE_1(sc_if,0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_SET);
2673 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_OFFLINE);
2674 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF);
2675 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_OFFLINE);
2676 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF);
2677 SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, SK_TXARCTL_OFF);
2678 SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP);
2679 SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP);
2680 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_OFF);
2681 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_OFF);
2683 /* Disable interrupts */
2684 if (sc_if->sk_port == SK_PORT_A)
2685 sc->sk_intrmask &= ~SK_INTRS1;
2687 sc->sk_intrmask &= ~SK_INTRS2;
2688 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
2690 SK_XM_READ_2(sc_if, XM_ISR);
2691 SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF);
2693 /* Free RX and TX mbufs still in the queues. */
2694 for (i = 0; i < SK_RX_RING_CNT; i++) {
2695 if (sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf != NULL) {
2696 m_freem(sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf);
2697 sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf = NULL;
2701 for (i = 0; i < SK_TX_RING_CNT; i++) {
2702 if (sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf != NULL) {
2703 m_freem(sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf);
2704 sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf = NULL;
2708 ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);