2 * Author: Tatu Ylonen <ylo@cs.hut.fi>
3 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
6 * As far as I am concerned, the code I have written for this software
7 * can be used freely for any purpose. Any derived versions of this
8 * software must be clearly marked as such, and if the derived work is
9 * incompatible with the protocol description in the RFC file, it must be
10 * called by a name other than "ssh" or "Secure Shell".
14 * SSH2 tty modes support by Kevin Steves.
15 * Copyright (c) 2001 Kevin Steves. All rights reserved.
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions
20 * 1. Redistributions of source code must retain the above copyright
21 * notice, this list of conditions and the following disclaimer.
22 * 2. Redistributions in binary form must reproduce the above copyright
23 * notice, this list of conditions and the following disclaimer in the
24 * documentation and/or other materials provided with the distribution.
26 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
27 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
28 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
29 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
30 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
31 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
32 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
33 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
34 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
35 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 * Encoding and decoding of terminal modes in a portable way.
40 * Much of the format is defined in ttymodes.h; it is included multiple times
41 * into this file with the appropriate macro definitions to generate the
46 RCSID("$OpenBSD: ttymodes.c,v 1.19 2003/04/08 20:21:29 itojun Exp $");
57 * uint32 (u_int) follows speed in SSH1 and SSH2
59 #define TTY_OP_ISPEED_PROTO1 192
60 #define TTY_OP_OSPEED_PROTO1 193
61 #define TTY_OP_ISPEED_PROTO2 128
62 #define TTY_OP_OSPEED_PROTO2 129
65 * Converts POSIX speed_t to a baud rate. The values of the
66 * constants for speed_t are not themselves portable.
69 speed_to_baud(speed_t speed)
155 * Converts a numeric baud rate to a POSIX speed_t.
158 baud_to_speed(int baud)
244 * Encodes terminal modes for the terminal referenced by fd
245 * or tiop in a portable manner, and appends the modes to a packet
249 tty_make_modes(int fd, struct termios *tiop)
254 int tty_op_ospeed, tty_op_ispeed;
255 void (*put_arg)(Buffer *, u_int);
259 tty_op_ospeed = TTY_OP_OSPEED_PROTO2;
260 tty_op_ispeed = TTY_OP_ISPEED_PROTO2;
261 put_arg = buffer_put_int;
263 tty_op_ospeed = TTY_OP_OSPEED_PROTO1;
264 tty_op_ispeed = TTY_OP_ISPEED_PROTO1;
265 put_arg = (void (*)(Buffer *, u_int)) buffer_put_char;
269 if (tcgetattr(fd, &tio) == -1) {
270 logit("tcgetattr: %.100s", strerror(errno));
276 /* Store input and output baud rates. */
277 baud = speed_to_baud(cfgetospeed(&tio));
278 debug3("tty_make_modes: ospeed %d", baud);
279 buffer_put_char(&buf, tty_op_ospeed);
280 buffer_put_int(&buf, baud);
281 baud = speed_to_baud(cfgetispeed(&tio));
282 debug3("tty_make_modes: ispeed %d", baud);
283 buffer_put_char(&buf, tty_op_ispeed);
284 buffer_put_int(&buf, baud);
286 /* Store values of mode flags. */
287 #define TTYCHAR(NAME, OP) \
288 debug3("tty_make_modes: %d %d", OP, tio.c_cc[NAME]); \
289 buffer_put_char(&buf, OP); \
290 put_arg(&buf, tio.c_cc[NAME]);
292 #define TTYMODE(NAME, FIELD, OP) \
293 debug3("tty_make_modes: %d %d", OP, ((tio.FIELD & NAME) != 0)); \
294 buffer_put_char(&buf, OP); \
295 put_arg(&buf, ((tio.FIELD & NAME) != 0));
297 #include "ttymodes.h"
303 /* Mark end of mode data. */
304 buffer_put_char(&buf, TTY_OP_END);
306 packet_put_string(buffer_ptr(&buf), buffer_len(&buf));
308 packet_put_raw(buffer_ptr(&buf), buffer_len(&buf));
313 * Decodes terminal modes for the terminal referenced by fd in a portable
314 * manner from a packet being read.
317 tty_parse_modes(int fd, int *n_bytes_ptr)
323 u_int (*get_arg)(void);
327 *n_bytes_ptr = packet_get_int();
328 debug3("tty_parse_modes: SSH2 n_bytes %d", *n_bytes_ptr);
329 if (*n_bytes_ptr == 0)
331 get_arg = packet_get_int;
334 get_arg = packet_get_char;
339 * Get old attributes for the terminal. We will modify these
340 * flags. I am hoping that if there are any machine-specific
341 * modes, they will initially have reasonable values.
343 if (tcgetattr(fd, &tio) == -1) {
344 logit("tcgetattr: %.100s", strerror(errno));
350 opcode = packet_get_char();
355 /* XXX: future conflict possible */
356 case TTY_OP_ISPEED_PROTO1:
357 case TTY_OP_ISPEED_PROTO2:
359 baud = packet_get_int();
360 debug3("tty_parse_modes: ispeed %d", baud);
361 if (failure != -1 && cfsetispeed(&tio, baud_to_speed(baud)) == -1)
362 error("cfsetispeed failed for %d", baud);
365 /* XXX: future conflict possible */
366 case TTY_OP_OSPEED_PROTO1:
367 case TTY_OP_OSPEED_PROTO2:
369 baud = packet_get_int();
370 debug3("tty_parse_modes: ospeed %d", baud);
371 if (failure != -1 && cfsetospeed(&tio, baud_to_speed(baud)) == -1)
372 error("cfsetospeed failed for %d", baud);
375 #define TTYCHAR(NAME, OP) \
377 n_bytes += arg_size; \
378 tio.c_cc[NAME] = get_arg(); \
379 debug3("tty_parse_modes: %d %d", OP, tio.c_cc[NAME]); \
381 #define TTYMODE(NAME, FIELD, OP) \
383 n_bytes += arg_size; \
384 if ((arg = get_arg())) \
387 tio.FIELD &= ~NAME; \
388 debug3("tty_parse_modes: %d %d", OP, arg); \
391 #include "ttymodes.h"
397 debug("Ignoring unsupported tty mode opcode %d (0x%x)",
402 * Opcodes 1 to 127 are defined to have
403 * a one-byte argument.
404 * Opcodes 128 to 159 are defined to have
405 * an integer argument.
407 if (opcode > 0 && opcode < 128) {
409 (void) packet_get_char();
411 } else if (opcode >= 128 && opcode < 160) {
413 (void) packet_get_int();
417 * It is a truly undefined opcode (160 to 255).
418 * We have no idea about its arguments. So we
419 * must stop parsing. Note that some data may be
420 * left in the packet; hopefully there is nothing
421 * more coming after the mode data.
423 logit("parse_tty_modes: unknown opcode %d", opcode);
429 * Opcodes 1 to 159 are defined to have
431 * Opcodes 160 to 255 are undefined and
432 * cause parsing to stop.
434 if (opcode > 0 && opcode < 160) {
436 (void) packet_get_int();
439 logit("parse_tty_modes: unknown opcode %d", opcode);
447 if (*n_bytes_ptr != n_bytes) {
448 *n_bytes_ptr = n_bytes;
449 logit("parse_tty_modes: n_bytes_ptr != n_bytes: %d %d",
450 *n_bytes_ptr, n_bytes);
451 return; /* Don't process bytes passed */
454 return; /* Packet parsed ok but tcgetattr() failed */
456 /* Set the new modes for the terminal. */
457 if (tcsetattr(fd, TCSANOW, &tio) == -1)
458 logit("Setting tty modes failed: %.100s", strerror(errno));