1 /* $FreeBSD: src/sys/netinet6/in6_pcb.c,v 1.10.2.9 2003/01/24 05:11:35 sam Exp $ */
2 /* $DragonFly: src/sys/netinet6/in6_pcb.c,v 1.10 2003/08/23 11:02:45 rob Exp $ */
3 /* $KAME: in6_pcb.c,v 1.31 2001/05/21 05:45:10 jinmei Exp $ */
6 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the name of the project nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36 * Copyright (c) 1982, 1986, 1991, 1993
37 * The Regents of the University of California. All rights reserved.
39 * Redistribution and use in source and binary forms, with or without
40 * modification, are permitted provided that the following conditions
42 * 1. Redistributions of source code must retain the above copyright
43 * notice, this list of conditions and the following disclaimer.
44 * 2. Redistributions in binary form must reproduce the above copyright
45 * notice, this list of conditions and the following disclaimer in the
46 * documentation and/or other materials provided with the distribution.
47 * 3. All advertising materials mentioning features or use of this software
48 * must display the following acknowledgement:
49 * This product includes software developed by the University of
50 * California, Berkeley and its contributors.
51 * 4. Neither the name of the University nor the names of its contributors
52 * may be used to endorse or promote products derived from this software
53 * without specific prior written permission.
55 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
56 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
57 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
58 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
59 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
60 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
61 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
62 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
63 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
64 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
67 * @(#)in_pcb.c 8.2 (Berkeley) 1/4/94
71 #include "opt_inet6.h"
72 #include "opt_ipsec.h"
74 #include <sys/param.h>
75 #include <sys/systm.h>
76 #include <sys/malloc.h>
78 #include <sys/domain.h>
79 #include <sys/protosw.h>
80 #include <sys/socket.h>
81 #include <sys/socketvar.h>
82 #include <sys/sockio.h>
83 #include <sys/errno.h>
88 #include <vm/vm_zone.h>
91 #include <net/if_types.h>
92 #include <net/route.h>
94 #include <netinet/in.h>
95 #include <netinet/in_var.h>
96 #include <netinet/in_systm.h>
97 #include <netinet/ip6.h>
98 #include <netinet/ip_var.h>
99 #include <netinet6/ip6_var.h>
100 #include <netinet6/nd6.h>
101 #include <netinet/in_pcb.h>
102 #include <netinet6/in6_pcb.h>
105 #include <netinet6/ipsec.h>
107 #include <netinet6/ipsec6.h>
109 #include <netinet6/ah.h>
111 #include <netinet6/ah6.h>
113 #include <netproto/key/key.h>
119 #include <netipsec/key.h>
121 #endif /* FAST_IPSEC */
123 struct in6_addr zeroin6_addr;
126 in6_pcbbind(struct inpcb *inp, struct sockaddr *nam, struct thread *td)
128 struct socket *so = inp->inp_socket;
129 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)NULL;
130 struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
132 int wild = 0, reuseport = (so->so_options & SO_REUSEPORT);
134 if (!in6_ifaddr) /* XXX broken! */
135 return (EADDRNOTAVAIL);
136 if (inp->inp_lport || !IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr))
138 if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
141 sin6 = (struct sockaddr_in6 *)nam;
142 if (nam->sa_len != sizeof(*sin6))
147 if (nam->sa_family != AF_INET6)
148 return(EAFNOSUPPORT);
150 /* KAME hack: embed scopeid */
151 if (in6_embedscope(&sin6->sin6_addr, sin6, inp, NULL) != 0)
153 /* this must be cleared for ifa_ifwithaddr() */
154 sin6->sin6_scope_id = 0;
156 lport = sin6->sin6_port;
157 if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
159 * Treat SO_REUSEADDR as SO_REUSEPORT for multicast;
160 * allow compepte duplication of binding if
161 * SO_REUSEPORT is set, or if SO_REUSEADDR is set
162 * and a multicast address is bound on both
163 * new and duplicated sockets.
165 if (so->so_options & SO_REUSEADDR)
166 reuseport = SO_REUSEADDR|SO_REUSEPORT;
167 } else if (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
168 struct ifaddr *ia = NULL;
170 sin6->sin6_port = 0; /* yech... */
171 if ((ia = ifa_ifwithaddr((struct sockaddr *)sin6)) == 0)
172 return(EADDRNOTAVAIL);
175 * XXX: bind to an anycast address might accidentally
176 * cause sending a packet with anycast source address.
177 * We should allow to bind to a deprecated address, since
178 * the application dare to use it.
181 ((struct in6_ifaddr *)ia)->ia6_flags &
182 (IN6_IFF_ANYCAST|IN6_IFF_NOTREADY|IN6_IFF_DETACHED)) {
183 return(EADDRNOTAVAIL);
188 struct proc *p = td->td_proc; /* may be NULL */
191 if (ntohs(lport) < IPV6PORT_RESERVED && p &&
192 suser_cred(p->p_ucred, PRISON_ROOT))
194 if (so->so_cred->cr_uid != 0 &&
195 !IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
196 t = in6_pcblookup_local(pcbinfo,
197 &sin6->sin6_addr, lport,
200 (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr) ||
201 !IN6_IS_ADDR_UNSPECIFIED(&t->in6p_laddr) ||
202 (t->inp_socket->so_options &
203 SO_REUSEPORT) == 0) &&
204 (so->so_cred->cr_uid !=
205 t->inp_socket->so_cred->cr_uid))
207 if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
208 IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
209 struct sockaddr_in sin;
211 in6_sin6_2_sin(&sin, sin6);
212 t = in_pcblookup_local(pcbinfo,
216 (so->so_cred->cr_uid !=
217 t->inp_socket->so_cred->cr_uid) &&
218 (ntohl(t->inp_laddr.s_addr) !=
221 INP_SOCKAF(t->inp_socket)))
225 t = in6_pcblookup_local(pcbinfo, &sin6->sin6_addr,
227 if (t && (reuseport & t->inp_socket->so_options) == 0)
229 if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
230 IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
231 struct sockaddr_in sin;
233 in6_sin6_2_sin(&sin, sin6);
234 t = in_pcblookup_local(pcbinfo, sin.sin_addr,
237 (reuseport & t->inp_socket->so_options)
239 (ntohl(t->inp_laddr.s_addr)
242 INP_SOCKAF(t->inp_socket)))
246 inp->in6p_laddr = sin6->sin6_addr;
250 if ((e = in6_pcbsetport(&inp->in6p_laddr, inp, td)) != 0)
254 inp->inp_lport = lport;
255 if (in_pcbinshash(inp) != 0) {
256 inp->in6p_laddr = in6addr_any;
265 * Transform old in6_pcbconnect() into an inner subroutine for new
266 * in6_pcbconnect(): Do some validity-checking on the remote
267 * address (in mbuf 'nam') and then determine local host address
268 * (i.e., which interface) to use to access that remote host.
270 * This preserves definition of in6_pcbconnect(), while supporting a
271 * slightly different version for T/TCP. (This is more than
272 * a bit of a kludge, but cleaning up the internal interfaces would
273 * have forced minor changes in every protocol).
277 in6_pcbladdr(struct inpcb *inp, struct sockaddr *nam,
278 struct in6_addr **plocal_addr6)
280 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
281 struct ifnet *ifp = NULL;
284 if (nam->sa_len != sizeof (*sin6))
286 if (sin6->sin6_family != AF_INET6)
287 return (EAFNOSUPPORT);
288 if (sin6->sin6_port == 0)
289 return (EADDRNOTAVAIL);
291 /* KAME hack: embed scopeid */
292 if (in6_embedscope(&sin6->sin6_addr, sin6, inp, &ifp) != 0)
297 * If the destination address is UNSPECIFIED addr,
298 * use the loopback addr, e.g ::1.
300 if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
301 sin6->sin6_addr = in6addr_loopback;
305 * XXX: in6_selectsrc might replace the bound local address
306 * with the address specified by setsockopt(IPV6_PKTINFO).
307 * Is it the intended behavior?
309 *plocal_addr6 = in6_selectsrc(sin6, inp->in6p_outputopts,
312 &inp->in6p_laddr, &error);
313 if (*plocal_addr6 == 0) {
315 error = EADDRNOTAVAIL;
319 * Don't do pcblookup call here; return interface in
321 * and exit to caller, that will do the lookup.
325 if (inp->in6p_route.ro_rt)
326 ifp = inp->in6p_route.ro_rt->rt_ifp;
333 * Connect from a socket to a specified address.
334 * Both address and port must be specified in argument sin.
335 * If don't have a local address for this socket yet,
339 in6_pcbconnect(struct inpcb *inp, struct sockaddr *nam, struct thread *td)
341 struct in6_addr *addr6;
342 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
346 * Call inner routine, to assign local interface address.
347 * in6_pcbladdr() may automatically fill in sin6_scope_id.
349 if ((error = in6_pcbladdr(inp, nam, &addr6)) != 0)
352 if (in6_pcblookup_hash(inp->inp_pcbinfo, &sin6->sin6_addr,
354 IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)
355 ? addr6 : &inp->in6p_laddr,
356 inp->inp_lport, 0, NULL) != NULL) {
359 if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
360 if (inp->inp_lport == 0) {
361 error = in6_pcbbind(inp, (struct sockaddr *)0, td);
365 inp->in6p_laddr = *addr6;
367 inp->in6p_faddr = sin6->sin6_addr;
368 inp->inp_fport = sin6->sin6_port;
369 /* update flowinfo - draft-itojun-ipv6-flowlabel-api-00 */
370 inp->in6p_flowinfo &= ~IPV6_FLOWLABEL_MASK;
371 if (inp->in6p_flags & IN6P_AUTOFLOWLABEL)
372 inp->in6p_flowinfo |=
373 (htonl(ip6_flow_seq++) & IPV6_FLOWLABEL_MASK);
381 * Return an IPv6 address, which is the most appropriate for given
382 * destination and user specified options.
383 * If necessary, this function lookups the routing table and return
384 * an entry to the caller for later use.
387 in6_selectsrc(dstsock, opts, mopts, ro, laddr, errorp)
388 struct sockaddr_in6 *dstsock;
389 struct ip6_pktopts *opts;
390 struct ip6_moptions *mopts;
391 struct route_in6 *ro;
392 struct in6_addr *laddr;
395 struct in6_addr *dst;
396 struct in6_ifaddr *ia6 = 0;
397 struct in6_pktinfo *pi = NULL;
399 dst = &dstsock->sin6_addr;
403 * If the source address is explicitly specified by the caller,
406 if (opts && (pi = opts->ip6po_pktinfo) &&
407 !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr))
408 return(&pi->ipi6_addr);
411 * If the source address is not specified but the socket(if any)
412 * is already bound, use the bound address.
414 if (laddr && !IN6_IS_ADDR_UNSPECIFIED(laddr))
418 * If the caller doesn't specify the source address but
419 * the outgoing interface, use an address associated with
422 if (pi && pi->ipi6_ifindex) {
423 /* XXX boundary check is assumed to be already done. */
424 ia6 = in6_ifawithscope(ifindex2ifnet[pi->ipi6_ifindex],
427 *errorp = EADDRNOTAVAIL;
430 return(&satosin6(&ia6->ia_addr)->sin6_addr);
434 * If the destination address is a link-local unicast address or
435 * a multicast address, and if the outgoing interface is specified
436 * by the sin6_scope_id filed, use an address associated with the
438 * XXX: We're now trying to define more specific semantics of
439 * sin6_scope_id field, so this part will be rewritten in
442 if ((IN6_IS_ADDR_LINKLOCAL(dst) || IN6_IS_ADDR_MULTICAST(dst)) &&
443 dstsock->sin6_scope_id) {
445 * I'm not sure if boundary check for scope_id is done
448 if (dstsock->sin6_scope_id < 0 ||
449 if_index < dstsock->sin6_scope_id) {
450 *errorp = ENXIO; /* XXX: better error? */
453 ia6 = in6_ifawithscope(ifindex2ifnet[dstsock->sin6_scope_id],
456 *errorp = EADDRNOTAVAIL;
459 return(&satosin6(&ia6->ia_addr)->sin6_addr);
463 * If the destination address is a multicast address and
464 * the outgoing interface for the address is specified
465 * by the caller, use an address associated with the interface.
466 * There is a sanity check here; if the destination has node-local
467 * scope, the outgoing interfacde should be a loopback address.
468 * Even if the outgoing interface is not specified, we also
469 * choose a loopback interface as the outgoing interface.
471 if (IN6_IS_ADDR_MULTICAST(dst)) {
472 struct ifnet *ifp = mopts ? mopts->im6o_multicast_ifp : NULL;
474 if (ifp == NULL && IN6_IS_ADDR_MC_NODELOCAL(dst)) {
479 ia6 = in6_ifawithscope(ifp, dst);
481 *errorp = EADDRNOTAVAIL;
484 return(&ia6->ia_addr.sin6_addr);
489 * If the next hop address for the packet is specified
490 * by caller, use an address associated with the route
494 struct sockaddr_in6 *sin6_next;
497 if (opts && opts->ip6po_nexthop) {
498 sin6_next = satosin6(opts->ip6po_nexthop);
499 rt = nd6_lookup(&sin6_next->sin6_addr, 1, NULL);
501 ia6 = in6_ifawithscope(rt->rt_ifp, dst);
503 ia6 = ifatoia6(rt->rt_ifa);
506 *errorp = EADDRNOTAVAIL;
509 return(&satosin6(&ia6->ia_addr)->sin6_addr);
514 * If route is known or can be allocated now,
515 * our src addr is taken from the i/f, else punt.
519 !IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr, dst)) {
521 ro->ro_rt = (struct rtentry *)0;
523 if (ro->ro_rt == (struct rtentry *)0 ||
524 ro->ro_rt->rt_ifp == (struct ifnet *)0) {
525 struct sockaddr_in6 *dst6;
527 /* No route yet, so try to acquire one */
528 bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
529 dst6 = (struct sockaddr_in6 *)&ro->ro_dst;
530 dst6->sin6_family = AF_INET6;
531 dst6->sin6_len = sizeof(struct sockaddr_in6);
532 dst6->sin6_addr = *dst;
533 if (IN6_IS_ADDR_MULTICAST(dst)) {
534 ro->ro_rt = rtalloc1(&((struct route *)ro)
537 rtalloc((struct route *)ro);
542 * in_pcbconnect() checks out IFF_LOOPBACK to skip using
543 * the address. But we don't know why it does so.
544 * It is necessary to ensure the scope even for lo0
545 * so doesn't check out IFF_LOOPBACK.
549 ia6 = in6_ifawithscope(ro->ro_rt->rt_ifa->ifa_ifp, dst);
550 if (ia6 == 0) /* xxx scope error ?*/
551 ia6 = ifatoia6(ro->ro_rt->rt_ifa);
554 *errorp = EHOSTUNREACH; /* no route */
557 return(&satosin6(&ia6->ia_addr)->sin6_addr);
560 *errorp = EADDRNOTAVAIL;
565 * Default hop limit selection. The precedence is as follows:
566 * 1. Hoplimit valued specified via ioctl.
567 * 2. (If the outgoing interface is detected) the current
568 * hop limit of the interface specified by router advertisement.
569 * 3. The system default hoplimit.
572 in6_selecthlim(in6p, ifp)
576 if (in6p && in6p->in6p_hops >= 0)
577 return(in6p->in6p_hops);
579 return(nd_ifinfo[ifp->if_index].chlim);
586 in6_pcbdisconnect(inp)
589 bzero((caddr_t)&inp->in6p_faddr, sizeof(inp->in6p_faddr));
591 /* clear flowinfo - draft-itojun-ipv6-flowlabel-api-00 */
592 inp->in6p_flowinfo &= ~IPV6_FLOWLABEL_MASK;
594 if (inp->inp_socket->so_state & SS_NOFDREF)
602 struct socket *so = inp->inp_socket;
603 struct inpcbinfo *ipi = inp->inp_pcbinfo;
606 if (inp->in6p_sp != NULL)
607 ipsec6_delete_pcbpolicy(inp);
609 inp->inp_gencnt = ++ipi->ipi_gencnt;
614 if (inp->in6p_options)
615 m_freem(inp->in6p_options);
616 ip6_freepcbopts(inp->in6p_outputopts);
617 ip6_freemoptions(inp->in6p_moptions);
618 if (inp->in6p_route.ro_rt)
619 rtfree(inp->in6p_route.ro_rt);
620 /* Check and free IPv4 related resources in case of mapped addr */
621 if (inp->inp_options)
622 (void)m_free(inp->inp_options);
623 ip_freemoptions(inp->inp_moptions);
626 zfree(ipi->ipi_zone, inp);
630 * The calling convention of in6_setsockaddr() and in6_setpeeraddr() was
631 * modified to match the pru_sockaddr() and pru_peeraddr() entry points
632 * in struct pr_usrreqs, so that protocols can just reference then directly
633 * without the need for a wrapper function. The socket must have a valid
634 * (i.e., non-nil) PCB, but it should be impossible to get an invalid one
635 * except through a kernel programming error, so it is acceptable to panic
636 * (or in this case trap) if the PCB is invalid. (Actually, we don't trap
637 * because there actually /is/ a programming error somewhere... XXX)
640 in6_setsockaddr(so, nam)
642 struct sockaddr **nam;
646 struct sockaddr_in6 *sin6;
649 * Do the malloc first in case it blocks.
651 MALLOC(sin6, struct sockaddr_in6 *, sizeof *sin6, M_SONAME, M_WAITOK);
652 bzero(sin6, sizeof *sin6);
653 sin6->sin6_family = AF_INET6;
654 sin6->sin6_len = sizeof(*sin6);
660 free(sin6, M_SONAME);
663 sin6->sin6_port = inp->inp_lport;
664 sin6->sin6_addr = inp->in6p_laddr;
666 if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
667 sin6->sin6_scope_id = ntohs(sin6->sin6_addr.s6_addr16[1]);
669 sin6->sin6_scope_id = 0; /*XXX*/
670 if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
671 sin6->sin6_addr.s6_addr16[1] = 0;
673 *nam = (struct sockaddr *)sin6;
678 in6_setpeeraddr(so, nam)
680 struct sockaddr **nam;
684 struct sockaddr_in6 *sin6;
687 * Do the malloc first in case it blocks.
689 MALLOC(sin6, struct sockaddr_in6 *, sizeof(*sin6), M_SONAME, M_WAITOK);
690 bzero((caddr_t)sin6, sizeof (*sin6));
691 sin6->sin6_family = AF_INET6;
692 sin6->sin6_len = sizeof(struct sockaddr_in6);
698 free(sin6, M_SONAME);
701 sin6->sin6_port = inp->inp_fport;
702 sin6->sin6_addr = inp->in6p_faddr;
704 if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
705 sin6->sin6_scope_id = ntohs(sin6->sin6_addr.s6_addr16[1]);
707 sin6->sin6_scope_id = 0; /*XXX*/
708 if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
709 sin6->sin6_addr.s6_addr16[1] = 0;
711 *nam = (struct sockaddr *)sin6;
716 in6_mapped_sockaddr(struct socket *so, struct sockaddr **nam)
718 struct inpcb *inp = sotoinpcb(so);
723 if (inp->inp_vflag & INP_IPV4) {
724 error = in_setsockaddr(so, nam);
726 in6_sin_2_v4mapsin6_in_sock(nam);
728 /* scope issues will be handled in in6_setsockaddr(). */
729 error = in6_setsockaddr(so, nam);
735 in6_mapped_peeraddr(struct socket *so, struct sockaddr **nam)
737 struct inpcb *inp = sotoinpcb(so);
742 if (inp->inp_vflag & INP_IPV4) {
743 error = in_setpeeraddr(so, nam);
745 in6_sin_2_v4mapsin6_in_sock(nam);
747 /* scope issues will be handled in in6_setpeeraddr(). */
748 error = in6_setpeeraddr(so, nam);
754 * Pass some notification to all connections of a protocol
755 * associated with address dst. The local address and/or port numbers
756 * may be specified to limit the search. The "usual action" will be
757 * taken, depending on the ctlinput cmd. The caller must filter any
758 * cmds that are uninteresting (e.g., no error in the map).
759 * Call the protocol specific routine (if any) to report
760 * any errors for each matching socket.
762 * Must be called at splnet.
765 in6_pcbnotify(head, dst, fport_arg, src, lport_arg, cmd, notify)
766 struct inpcbhead *head;
767 struct sockaddr *dst;
769 const struct sockaddr *src;
772 void (*notify) (struct inpcb *, int);
774 struct inpcb *inp, *ninp;
775 struct sockaddr_in6 sa6_src, *sa6_dst;
776 u_short fport = fport_arg, lport = lport_arg;
780 if ((unsigned)cmd > PRC_NCMDS || dst->sa_family != AF_INET6)
783 sa6_dst = (struct sockaddr_in6 *)dst;
784 if (IN6_IS_ADDR_UNSPECIFIED(&sa6_dst->sin6_addr))
788 * note that src can be NULL when we get notify by local fragmentation.
790 sa6_src = (src == NULL) ? sa6_any : *(struct sockaddr_in6 *)src;
791 flowinfo = sa6_src.sin6_flowinfo;
794 * Redirects go to all references to the destination,
795 * and use in6_rtchange to invalidate the route cache.
796 * Dead host indications: also use in6_rtchange to invalidate
797 * the cache, and deliver the error to all the sockets.
798 * Otherwise, if we have knowledge of the local port and address,
799 * deliver only to that socket.
801 if (PRC_IS_REDIRECT(cmd) || cmd == PRC_HOSTDEAD) {
804 bzero((caddr_t)&sa6_src.sin6_addr, sizeof(sa6_src.sin6_addr));
806 if (cmd != PRC_HOSTDEAD)
807 notify = in6_rtchange;
809 errno = inet6ctlerrmap[cmd];
811 for (inp = LIST_FIRST(head); inp != NULL; inp = ninp) {
812 ninp = LIST_NEXT(inp, inp_list);
814 if ((inp->inp_vflag & INP_IPV6) == 0)
818 * Detect if we should notify the error. If no source and
819 * destination ports are specifed, but non-zero flowinfo and
820 * local address match, notify the error. This is the case
821 * when the error is delivered with an encrypted buffer
822 * by ESP. Otherwise, just compare addresses and ports
825 if (lport == 0 && fport == 0 && flowinfo &&
826 inp->inp_socket != NULL &&
827 flowinfo == (inp->in6p_flowinfo & IPV6_FLOWLABEL_MASK) &&
828 IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, &sa6_src.sin6_addr))
830 else if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
831 &sa6_dst->sin6_addr) ||
832 inp->inp_socket == 0 ||
833 (lport && inp->inp_lport != lport) ||
834 (!IN6_IS_ADDR_UNSPECIFIED(&sa6_src.sin6_addr) &&
835 !IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
836 &sa6_src.sin6_addr)) ||
837 (fport && inp->inp_fport != fport))
842 (*notify)(inp, errno);
848 * Lookup a PCB based on the local address and port.
851 in6_pcblookup_local(pcbinfo, laddr, lport_arg, wild_okay)
852 struct inpcbinfo *pcbinfo;
853 struct in6_addr *laddr;
858 int matchwild = 3, wildcard;
859 u_short lport = lport_arg;
862 struct inpcbhead *head;
864 * Look for an unconnected (wildcard foreign addr) PCB that
865 * matches the local address and port we're looking for.
867 head = &pcbinfo->hashbase[INP_PCBHASH(INADDR_ANY, lport, 0,
869 LIST_FOREACH(inp, head, inp_hash) {
870 if ((inp->inp_vflag & INP_IPV6) == 0)
872 if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) &&
873 IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
874 inp->inp_lport == lport) {
886 struct inpcbporthead *porthash;
887 struct inpcbport *phd;
888 struct inpcb *match = NULL;
890 * Best fit PCB lookup.
892 * First see if this local port is in use by looking on the
895 porthash = &pcbinfo->porthashbase[INP_PCBPORTHASH(lport,
896 pcbinfo->porthashmask)];
897 LIST_FOREACH(phd, porthash, phd_hash) {
898 if (phd->phd_port == lport)
903 * Port is in use by one or more PCBs. Look for best
906 LIST_FOREACH(inp, &phd->phd_pcblist, inp_portlist) {
908 if ((inp->inp_vflag & INP_IPV6) == 0)
910 if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr))
912 if (!IN6_IS_ADDR_UNSPECIFIED(
914 if (IN6_IS_ADDR_UNSPECIFIED(laddr))
916 else if (!IN6_ARE_ADDR_EQUAL(
917 &inp->in6p_laddr, laddr))
920 if (!IN6_IS_ADDR_UNSPECIFIED(laddr))
923 if (wildcard < matchwild) {
925 matchwild = wildcard;
926 if (matchwild == 0) {
937 in6_pcbpurgeif0(head, ifp)
942 struct ip6_moptions *im6o;
943 struct in6_multi_mship *imm, *nimm;
945 for (in6p = head; in6p != NULL; in6p = LIST_NEXT(in6p, inp_list)) {
946 im6o = in6p->in6p_moptions;
947 if ((in6p->inp_vflag & INP_IPV6) &&
950 * Unselect the outgoing interface if it is being
953 if (im6o->im6o_multicast_ifp == ifp)
954 im6o->im6o_multicast_ifp = NULL;
957 * Drop multicast group membership if we joined
958 * through the interface being detached.
959 * XXX controversial - is it really legal for kernel
962 for (imm = im6o->im6o_memberships.lh_first;
963 imm != NULL; imm = nimm) {
964 nimm = imm->i6mm_chain.le_next;
965 if (imm->i6mm_maddr->in6m_ifp == ifp) {
966 LIST_REMOVE(imm, i6mm_chain);
967 in6_delmulti(imm->i6mm_maddr);
968 free(imm, M_IPMADDR);
976 * Check for alternatives when higher level complains
977 * about service problems. For now, invalidate cached
978 * routing information. If the route was created dynamically
979 * (by a redirect), time to try a default gateway again.
986 struct rt_addrinfo info;
988 if ((rt = in6p->in6p_route.ro_rt) != NULL) {
989 bzero((caddr_t)&info, sizeof(info));
990 info.rti_flags = rt->rt_flags;
991 info.rti_info[RTAX_DST] = rt_key(rt);
992 info.rti_info[RTAX_GATEWAY] = rt->rt_gateway;
993 info.rti_info[RTAX_NETMASK] = rt_mask(rt);
994 rt_missmsg(RTM_LOSING, &info, rt->rt_flags, 0);
995 if (rt->rt_flags & RTF_DYNAMIC)
996 (void)rtrequest1(RTM_DELETE, &info, NULL);
997 in6p->in6p_route.ro_rt = NULL;
1000 * A new route can be allocated
1001 * the next time output is attempted.
1007 * After a routing change, flush old routing
1008 * and allocate a (hopefully) better one.
1011 in6_rtchange(inp, errno)
1015 if (inp->in6p_route.ro_rt) {
1016 rtfree(inp->in6p_route.ro_rt);
1017 inp->in6p_route.ro_rt = 0;
1019 * A new route can be allocated the next time
1020 * output is attempted.
1026 * Lookup PCB in hash list.
1029 in6_pcblookup_hash(pcbinfo, faddr, fport_arg, laddr, lport_arg, wildcard, ifp)
1030 struct inpcbinfo *pcbinfo;
1031 struct in6_addr *faddr, *laddr;
1032 u_int fport_arg, lport_arg;
1036 struct inpcbhead *head;
1038 u_short fport = fport_arg, lport = lport_arg;
1041 if (faithprefix_p != NULL)
1042 faith = (*faithprefix_p)(laddr);
1047 * First look for an exact match.
1049 head = &pcbinfo->hashbase[INP_PCBHASH(faddr->s6_addr32[3] /* XXX */,
1051 pcbinfo->hashmask)];
1052 LIST_FOREACH(inp, head, inp_hash) {
1053 if ((inp->inp_vflag & INP_IPV6) == 0)
1055 if (IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, faddr) &&
1056 IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
1057 inp->inp_fport == fport &&
1058 inp->inp_lport == lport) {
1066 struct inpcb *local_wild = NULL;
1068 head = &pcbinfo->hashbase[INP_PCBHASH(INADDR_ANY, lport, 0,
1069 pcbinfo->hashmask)];
1070 LIST_FOREACH(inp, head, inp_hash) {
1071 if ((inp->inp_vflag & INP_IPV6) == 0)
1073 if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) &&
1074 inp->inp_lport == lport) {
1075 if (faith && (inp->inp_flags & INP_FAITH) == 0)
1077 if (IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
1080 else if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr))
1084 return (local_wild);
1094 init_sin6(struct sockaddr_in6 *sin6, struct mbuf *m)
1098 ip = mtod(m, struct ip6_hdr *);
1099 bzero(sin6, sizeof(*sin6));
1100 sin6->sin6_len = sizeof(*sin6);
1101 sin6->sin6_family = AF_INET6;
1102 sin6->sin6_addr = ip->ip6_src;
1103 if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
1104 sin6->sin6_addr.s6_addr16[1] = 0;
1105 sin6->sin6_scope_id =
1106 (m->m_pkthdr.rcvif && IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
1107 ? m->m_pkthdr.rcvif->if_index : 0;