Register keyword removal

[dragonfly.git] / sys / i386 / include / specialreg.h

/*-
 * Copyright (c) 1991 The Regents of the University of California.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by the University of
 *      California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *      from: @(#)specialreg.h  7.1 (Berkeley) 5/9/91
 * $FreeBSD: src/sys/i386/include/specialreg.h,v 1.19.2.3 2003/01/22 17:24:28 jhb Exp $
 * $DragonFly: src/sys/i386/include/Attic/specialreg.h,v 1.2 2003/06/17 04:28:36 dillon Exp $
 */

#ifndef _MACHINE_SPECIALREG_H_
#define _MACHINE_SPECIALREG_H_

/*
 * Bits in 386 special registers:
 */
#define CR0_PE  0x00000001      /* Protected mode Enable */
#define CR0_MP  0x00000002      /* "Math" Present (NPX or NPX emulator) */
#define CR0_EM  0x00000004      /* EMulate non-NPX coproc. (trap ESC only) */
#define CR0_TS  0x00000008      /* Task Switched (if MP, trap ESC and WAIT) */
#ifdef notused
#define CR0_ET  0x00000010      /* Extension Type (387 (if set) vs 287) */
#endif
#define CR0_PG  0x80000000      /* PaGing enable */

/*
 * Bits in 486 special registers:
 */
#define CR0_NE  0x00000020      /* Numeric Error enable (EX16 vs IRQ13) */
#define CR0_WP  0x00010000      /* Write Protect (honor page protect in
                                                           all modes) */
#define CR0_AM  0x00040000      /* Alignment Mask (set to enable AC flag) */
#define CR0_NW  0x20000000      /* Not Write-through */
#define CR0_CD  0x40000000      /* Cache Disable */

/*
 * Bits in PPro special registers
 */
#define CR4_VME 0x00000001      /* Virtual 8086 mode extensions */
#define CR4_PVI 0x00000002      /* Protected-mode virtual interrupts */
#define CR4_TSD 0x00000004      /* Time stamp disable */
#define CR4_DE  0x00000008      /* Debugging extensions */
#define CR4_PSE 0x00000010      /* Page size extensions */
#define CR4_PAE 0x00000020      /* Physical address extension */
#define CR4_MCE 0x00000040      /* Machine check enable */
#define CR4_PGE 0x00000080      /* Page global enable */
#define CR4_PCE 0x00000100      /* Performance monitoring counter enable */
#define CR4_FXSR 0x00000200     /* Fast FPU save/restore used by OS */
#define CR4_XMM 0x00000400      /* enable SIMD/MMX2 to use except 16 */

/*
 * CPUID instruction features register
 */
#define CPUID_FPU       0x00000001
#define CPUID_VME       0x00000002
#define CPUID_DE        0x00000004
#define CPUID_PSE       0x00000008
#define CPUID_TSC       0x00000010
#define CPUID_MSR       0x00000020
#define CPUID_PAE       0x00000040
#define CPUID_MCE       0x00000080
#define CPUID_CX8       0x00000100
#define CPUID_APIC      0x00000200
#define CPUID_B10       0x00000400
#define CPUID_SEP       0x00000800
#define CPUID_MTRR      0x00001000
#define CPUID_PGE       0x00002000
#define CPUID_MCA       0x00004000
#define CPUID_CMOV      0x00008000
#define CPUID_PAT       0x00010000
#define CPUID_PSE36     0x00020000
#define CPUID_PSN       0x00040000
#define CPUID_CLFSH     0x00080000
#define CPUID_B20       0x00100000
#define CPUID_DS        0x00200000
#define CPUID_ACPI      0x00400000
#define CPUID_MMX       0x00800000
#define CPUID_FXSR      0x01000000
#define CPUID_SSE       0x02000000
#define CPUID_XMM       0x02000000
#define CPUID_SSE2      0x04000000
#define CPUID_SS        0x08000000
#define CPUID_HTT       0x10000000
#define CPUID_TM        0x20000000
#define CPUID_B30       0x40000000
#define CPUID_PBE       0x80000000

/*
 * CPUID instruction 1 ebx info
 */
#define CPUID_BRAND_INDEX       0x000000ff
#define CPUID_CLFUSH_SIZE       0x0000ff00
#define CPUID_HTT_CORES         0x00ff0000
#define CPUID_LOCAL_APIC_ID     0xff000000

/*
 * Model-specific registers for the i386 family
 */
#define MSR_P5_MC_ADDR          0x000
#define MSR_P5_MC_TYPE          0x001
#define MSR_TSC                 0x010
#define MSR_APICBASE            0x01b
#define MSR_EBL_CR_POWERON      0x02a
#define MSR_BIOS_UPDT_TRIG      0x079
#define MSR_BIOS_SIGN           0x08b
#define MSR_PERFCTR0            0x0c1
#define MSR_PERFCTR1            0x0c2
#define MSR_MTRRcap             0x0fe
#define MSR_MCG_CAP             0x179
#define MSR_MCG_STATUS          0x17a
#define MSR_MCG_CTL             0x17b
#define MSR_EVNTSEL0            0x186
#define MSR_EVNTSEL1            0x187
#define MSR_DEBUGCTLMSR         0x1d9
#define MSR_LASTBRANCHFROMIP    0x1db
#define MSR_LASTBRANCHTOIP      0x1dc
#define MSR_LASTINTFROMIP       0x1dd
#define MSR_LASTINTTOIP         0x1de
#define MSR_ROB_CR_BKUPTMPDR6   0x1e0
#define MSR_MTRRVarBase         0x200
#define MSR_MTRR64kBase         0x250
#define MSR_MTRR16kBase         0x258
#define MSR_MTRR4kBase          0x268
#define MSR_MTRRdefType         0x2ff
#define MSR_MC0_CTL             0x400
#define MSR_MC0_STATUS          0x401
#define MSR_MC0_ADDR            0x402
#define MSR_MC0_MISC            0x403
#define MSR_MC1_CTL             0x404
#define MSR_MC1_STATUS          0x405
#define MSR_MC1_ADDR            0x406
#define MSR_MC1_MISC            0x407
#define MSR_MC2_CTL             0x408
#define MSR_MC2_STATUS          0x409
#define MSR_MC2_ADDR            0x40a
#define MSR_MC2_MISC            0x40b
#define MSR_MC4_CTL             0x40c
#define MSR_MC4_STATUS          0x40d
#define MSR_MC4_ADDR            0x40e
#define MSR_MC4_MISC            0x40f
#define MSR_MC3_CTL             0x410
#define MSR_MC3_STATUS          0x411
#define MSR_MC3_ADDR            0x412
#define MSR_MC3_MISC            0x413

/*
 * Constants related to MTRRs
 */
#define MTRR_N64K               8       /* numbers of fixed-size entries */
#define MTRR_N16K               16
#define MTRR_N4K                64

/*
 * Cyrix configuration registers, accessible as IO ports.
 */
#define CCR0                    0xc0    /* Configuration control register 0 */
#define CCR0_NC0                0x01    /* First 64K of each 1M memory region is
                                                                   non-cacheable */
#define CCR0_NC1                0x02    /* 640K-1M region is non-cacheable */
#define CCR0_A20M               0x04    /* Enables A20M# input pin */
#define CCR0_KEN                0x08    /* Enables KEN# input pin */
#define CCR0_FLUSH              0x10    /* Enables FLUSH# input pin */
#define CCR0_BARB               0x20    /* Flushes internal cache when entering hold
                                                                   state */
#define CCR0_CO                 0x40    /* Cache org: 1=direct mapped, 0=2x set
                                                                   assoc */
#define CCR0_SUSPEND    0x80    /* Enables SUSP# and SUSPA# pins */

#define CCR1                    0xc1    /* Configuration control register 1 */
#define CCR1_RPL                0x01    /* Enables RPLSET and RPLVAL# pins */
#define CCR1_SMI                0x02    /* Enables SMM pins */
#define CCR1_SMAC               0x04    /* System management memory access */
#define CCR1_MMAC               0x08    /* Main memory access */
#define CCR1_NO_LOCK    0x10    /* Negate LOCK# */
#define CCR1_SM3                0x80    /* SMM address space address region 3 */

#define CCR2                    0xc2
#define CCR2_WB                 0x02    /* Enables WB cache interface pins */
#define CCR2_SADS               0x02    /* Slow ADS */
#define CCR2_LOCK_NW    0x04    /* LOCK NW Bit */
#define CCR2_SUSP_HLT   0x08    /* Suspend on HALT */
#define CCR2_WT1                0x10    /* WT region 1 */
#define CCR2_WPR1               0x10    /* Write-protect region 1 */
#define CCR2_BARB               0x20    /* Flushes write-back cache when entering
                                                                   hold state. */
#define CCR2_BWRT               0x40    /* Enables burst write cycles */
#define CCR2_USE_SUSP   0x80    /* Enables suspend pins */

#define CCR3                    0xc3
#define CCR3_SMILOCK    0x01    /* SMM register lock */
#define CCR3_NMI                0x02    /* Enables NMI during SMM */
#define CCR3_LINBRST    0x04    /* Linear address burst cycles */
#define CCR3_SMMMODE    0x08    /* SMM Mode */
#define CCR3_MAPEN0             0x10    /* Enables Map0 */
#define CCR3_MAPEN1             0x20    /* Enables Map1 */
#define CCR3_MAPEN2             0x40    /* Enables Map2 */
#define CCR3_MAPEN3             0x80    /* Enables Map3 */

#define CCR4                    0xe8
#define CCR4_IOMASK             0x07
#define CCR4_MEM                0x08    /* Enables momory bypassing */
#define CCR4_DTE                0x10    /* Enables directory table entry cache */
#define CCR4_FASTFPE    0x20    /* Fast FPU exception */
#define CCR4_CPUID              0x80    /* Enables CPUID instruction */

#define CCR5                    0xe9
#define CCR5_WT_ALLOC   0x01    /* Write-through allocate */
#define CCR5_SLOP               0x02    /* LOOP instruction slowed down */
#define CCR5_LBR1               0x10    /* Local bus region 1 */
#define CCR5_ARREN              0x20    /* Enables ARR region */

#define CCR6                    0xea

#define CCR7                    0xeb

/* Performance Control Register (5x86 only). */
#define PCR0                    0x20
#define PCR0_RSTK               0x01    /* Enables return stack */
#define PCR0_BTB                0x02    /* Enables branch target buffer */
#define PCR0_LOOP               0x04    /* Enables loop */
#define PCR0_AIS                0x08    /* Enables all instrcutions stalled to
                                                                   serialize pipe. */
#define PCR0_MLR                0x10    /* Enables reordering of misaligned loads */
#define PCR0_BTBRT              0x40    /* Enables BTB test register. */
#define PCR0_LSSER              0x80    /* Disable reorder */

/* Device Identification Registers */
#define DIR0                    0xfe
#define DIR1                    0xff

/*
 * The following four 3-byte registers control the non-cacheable regions.
 * These registers must be written as three separate bytes.
 *
 * NCRx+0: A31-A24 of starting address
 * NCRx+1: A23-A16 of starting address
 * NCRx+2: A15-A12 of starting address | NCR_SIZE_xx.
 *
 * The non-cacheable region's starting address must be aligned to the
 * size indicated by the NCR_SIZE_xx field.
 */
#define NCR1    0xc4
#define NCR2    0xc7
#define NCR3    0xca
#define NCR4    0xcd

#define NCR_SIZE_0K     0
#define NCR_SIZE_4K     1
#define NCR_SIZE_8K     2
#define NCR_SIZE_16K    3
#define NCR_SIZE_32K    4
#define NCR_SIZE_64K    5
#define NCR_SIZE_128K   6
#define NCR_SIZE_256K   7
#define NCR_SIZE_512K   8
#define NCR_SIZE_1M     9
#define NCR_SIZE_2M     10
#define NCR_SIZE_4M     11
#define NCR_SIZE_8M     12
#define NCR_SIZE_16M    13
#define NCR_SIZE_32M    14
#define NCR_SIZE_4G     15

/*
 * The address region registers are used to specify the location and
 * size for the eight address regions.
 *
 * ARRx + 0: A31-A24 of start address
 * ARRx + 1: A23-A16 of start address
 * ARRx + 2: A15-A12 of start address | ARR_SIZE_xx
 */
#define ARR0    0xc4
#define ARR1    0xc7
#define ARR2    0xca
#define ARR3    0xcd
#define ARR4    0xd0
#define ARR5    0xd3
#define ARR6    0xd6
#define ARR7    0xd9

#define ARR_SIZE_0K             0
#define ARR_SIZE_4K             1
#define ARR_SIZE_8K             2
#define ARR_SIZE_16K    3
#define ARR_SIZE_32K    4
#define ARR_SIZE_64K    5
#define ARR_SIZE_128K   6
#define ARR_SIZE_256K   7
#define ARR_SIZE_512K   8
#define ARR_SIZE_1M             9
#define ARR_SIZE_2M             10
#define ARR_SIZE_4M             11
#define ARR_SIZE_8M             12
#define ARR_SIZE_16M    13
#define ARR_SIZE_32M    14
#define ARR_SIZE_4G             15

/*
 * The region control registers specify the attributes associated with
 * the ARRx addres regions.
 */
#define RCR0    0xdc
#define RCR1    0xdd
#define RCR2    0xde
#define RCR3    0xdf
#define RCR4    0xe0
#define RCR5    0xe1
#define RCR6    0xe2
#define RCR7    0xe3

#define RCR_RCD 0x01    /* Disables caching for ARRx (x = 0-6). */
#define RCR_RCE 0x01    /* Enables caching for ARR7. */
#define RCR_WWO 0x02    /* Weak write ordering. */
#define RCR_WL  0x04    /* Weak locking. */
#define RCR_WG  0x08    /* Write gathering. */
#define RCR_WT  0x10    /* Write-through. */
#define RCR_NLB 0x20    /* LBA# pin is not asserted. */

/* AMD Write Allocate Top-Of-Memory and Control Register */
#define AMD_WT_ALLOC_TME        0x40000 /* top-of-memory enable */
#define AMD_WT_ALLOC_PRE        0x20000 /* programmable range enable */
#define AMD_WT_ALLOC_FRE        0x10000 /* fixed (A0000-FFFFF) range enable */


#ifndef LOCORE
static __inline u_char
read_cyrix_reg(u_char reg)
{
        outb(0x22, reg);
        return inb(0x23);
}

static __inline void
write_cyrix_reg(u_char reg, u_char data)
{
        outb(0x22, reg);
        outb(0x23, data);
}
#endif

#endif /* !_MACHINE_SPECIALREG_H_ */