1 /* $NetBSD: if_devar.h,v 1.32 1999/04/01 14:55:25 tsubai Exp $ */
3 /* $FreeBSD: src/sys/pci/if_devar.h,v 1.23.2.1 2000/08/04 23:25:10 peter Exp $ */
6 * Copyright (c) 1994-1997 Matt Thomas (matt@3am-software.com)
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 * Id: if_devar.h,v 1.28 1997/07/03 16:55:07 thomas Exp
31 #if !defined(_DEVAR_H)
34 typedef bus_addr_t tulip_csrptr_t;
36 #define TULIP_PCI_CSRSIZE 8
37 #define TULIP_PCI_CSROFFSET 0
39 #define TULIP_CSR_READ(sc, csr) \
40 bus_space_read_4((sc)->tulip_csrs_bst, \
41 (sc)->tulip_csrs_bsh, \
43 #define TULIP_CSR_WRITE(sc, csr, val) \
44 bus_space_write_4((sc)->tulip_csrs_bst, \
45 (sc)->tulip_csrs_bsh, \
46 (sc)->tulip_csrs.csr, val)
48 #define TULIP_CSR_READBYTE(sc, csr) \
49 bus_space_read_1((sc)->tulip_csrs_bst, \
50 (sc)->tulip_csrs_bsh, \
52 #define TULIP_CSR_WRITEBYTE(sc, csr, val) \
53 bus_space_write_1((sc)->tulip_csrs_bst, \
54 (sc)->tulip_csrs_bsh, \
55 (sc)->tulip_csrs.csr, val)
58 * This structure contains "pointers" for the registers on
59 * the various 21x4x chips. CSR0 through CSR8 are common
60 * to all chips. After that, it gets messy...
63 tulip_csrptr_t csr_busmode; /* CSR0 */
64 tulip_csrptr_t csr_txpoll; /* CSR1 */
65 tulip_csrptr_t csr_rxpoll; /* CSR2 */
66 tulip_csrptr_t csr_rxlist; /* CSR3 */
67 tulip_csrptr_t csr_txlist; /* CSR4 */
68 tulip_csrptr_t csr_status; /* CSR5 */
69 tulip_csrptr_t csr_command; /* CSR6 */
70 tulip_csrptr_t csr_intr; /* CSR7 */
71 tulip_csrptr_t csr_missed_frames; /* CSR8 */
72 tulip_csrptr_t csr_9; /* CSR9 */
73 tulip_csrptr_t csr_10; /* CSR10 */
74 tulip_csrptr_t csr_11; /* CSR11 */
75 tulip_csrptr_t csr_12; /* CSR12 */
76 tulip_csrptr_t csr_13; /* CSR13 */
77 tulip_csrptr_t csr_14; /* CSR14 */
78 tulip_csrptr_t csr_15; /* CSR15 */
81 #define csr_enetrom csr_9 /* 21040 */
82 #define csr_reserved csr_10 /* 21040 */
83 #define csr_full_duplex csr_11 /* 21040 */
84 #define csr_bootrom csr_10 /* 21041/21140A/?? */
85 #define csr_gp csr_12 /* 21140* */
86 #define csr_watchdog csr_15 /* 21140* */
87 #define csr_gp_timer csr_11 /* 21041/21140* */
88 #define csr_srom_mii csr_9 /* 21041/21140* */
89 #define csr_sia_status csr_12 /* 2104x */
90 #define csr_sia_connectivity csr_13 /* 2104x */
91 #define csr_sia_tx_rx csr_14 /* 2104x */
92 #define csr_sia_general csr_15 /* 2104x */
95 * While 21x4x allows chaining of its descriptors, this driver
96 * doesn't take advantage of it. We keep the descriptors in a
97 * traditional FIFO ring.
100 tulip_desc_t *ri_first; /* first entry in ring */
101 tulip_desc_t *ri_last; /* one after last entry */
102 tulip_desc_t *ri_nextin; /* next to processed by host */
103 tulip_desc_t *ri_nextout; /* next to processed by adapter */
109 * The 21040 has a stupid restriction in that the receive
110 * buffers must be longword aligned. But since Ethernet
111 * headers are not a multiple of longwords in size this forces
112 * the data to non-longword aligned. Since IP requires the
113 * data to be longword aligned, we need to copy it after it has
114 * been DMA'ed in our memory.
116 * Since we have to copy it anyways, we might as well as allocate
117 * dedicated receive space for the input. This allows to use a
118 * small receive buffer size and more ring entries to be able to
119 * better keep with a flood of tiny Ethernet packets.
121 * The receive space MUST ALWAYS be a multiple of the page size.
122 * And the number of receive descriptors multiplied by the size
123 * of the receive buffers must equal the recevive space. This
124 * is so that we can manipulate the page tables so that even if a
125 * packet wraps around the end of the receive space, we can
126 * treat it as virtually contiguous.
128 * The above used to be true (the stupid restriction is still true)
129 * but we gone to directly DMA'ing into MBUFs (unless it's on an
130 * architecture which can't handle unaligned accesses) because with
131 * 100Mb/s cards the copying is just too much of a hit.
133 #if !defined(__i386__)
134 #define TULIP_COPY_RXDATA 1
137 #define TULIP_DATA_PER_DESC 2032
138 #define TULIP_TXTIMER 4
139 #define TULIP_RXDESCS 48
140 #define TULIP_TXDESCS 128
141 #define TULIP_RXQ_TARGET 32
142 #if TULIP_RXQ_TARGET >= TULIP_RXDESCS
143 #error TULIP_RXQ_TARGET must be less than TULIP_RXDESCS
145 #define TULIP_RX_BUFLEN ((MCLBYTES < 2048 ? MCLBYTES : 2048) - 16)
148 * Forward reference to make C happy.
150 typedef struct _tulip_softc_t tulip_softc_t;
153 * The various controllers support.
159 TULIP_21140, TULIP_21140A, TULIP_21142,
165 * Various physical media types supported.
166 * BNCAUI is BNC or AUI since on the 21040 you can't really tell
172 TULIP_MEDIA_10BASET_FD,
177 TULIP_MEDIA_100BASETX,
178 TULIP_MEDIA_100BASETX_FD,
179 TULIP_MEDIA_100BASET4,
180 TULIP_MEDIA_100BASEFX,
181 TULIP_MEDIA_100BASEFX_FD,
185 #define TULIP_BIT(b) (1L << ((int)(b)))
186 #define TULIP_FDBIT(m) (1L << ((int)TULIP_MEDIA_ ## m ## _FD))
187 #define TULIP_MBIT(m) (1L << ((int)TULIP_MEDIA_ ## m ))
188 #define TULIP_IS_MEDIA_FD(m) (TULIP_BIT(m) & \
189 (TULIP_FDBIT(10BASET) \
190 |TULIP_FDBIT(100BASETX) \
191 |TULIP_FDBIT(100BASEFX)))
192 #define TULIP_CAN_MEDIA_FD(m) (TULIP_BIT(m) & \
193 (TULIP_MBIT(10BASET) \
194 |TULIP_MBIT(100BASETX) \
195 |TULIP_MBIT(100BASEFX)))
196 #define TULIP_FD_MEDIA_OF(m) ((tulip_media_t)((m) + 1))
197 #define TULIP_HD_MEDIA_OF(m) ((tulip_media_t)((m) - 1))
198 #define TULIP_IS_MEDIA_100MB(m) ((m) >= TULIP_MEDIA_100BASETX)
199 #define TULIP_IS_MEDIA_TP(m) ((TULIP_BIT(m) & \
202 |TULIP_MBIT(AUIBNC) \
203 |TULIP_MBIT(EXTSIA))) == 0)
205 #define TULIP_SROM_ATTR_MII 0x0100
206 #define TULIP_SROM_ATTR_NWAY 0x0200
207 #define TULIP_SROM_ATTR_AUTOSENSE 0x0400
208 #define TULIP_SROM_ATTR_POWERUP 0x0800
209 #define TULIP_SROM_ATTR_NOLINKPASS 0x1000
213 TULIP_MEDIAINFO_NONE,
217 TULIP_MEDIAINFO_RESET,
222 u_int16_t sia_connectivity;
224 u_int16_t sia_general;
225 u_int32_t sia_gp_control; /* 21142/21143 */
226 u_int32_t sia_gp_data; /* 21142/21143 */
229 u_int32_t gpr_cmdmode;
230 u_int32_t gpr_gpcontrol; /* 21142/21143 */
231 u_int32_t gpr_gpdata;
232 u_int8_t gpr_actmask;
233 u_int8_t gpr_actdata;
234 u_int gpr_default : 1;
237 u_int32_t mii_mediamask;
238 u_int16_t mii_capabilities;
239 u_int16_t mii_advertisement;
240 u_int16_t mii_full_duplex;
241 u_int16_t mii_tx_threshold;
242 u_int16_t mii_interrupt; /* 21142/21143 */
243 u_int8_t mii_phyaddr;
244 u_int8_t mii_gpr_length;
245 u_int8_t mii_gpr_offset;
246 u_int8_t mii_reset_length;
247 u_int8_t mii_reset_offset;
251 } tulip_media_info_t;
253 #define mi_sia_connectivity mi_un.un_sia.sia_connectivity
254 #define mi_sia_tx_rx mi_un.un_sia.sia_tx_rx
255 #define mi_sia_general mi_un.un_sia.sia_general
256 #define mi_sia_gp_control mi_un.un_sia.sia_gp_control
257 #define mi_sia_gp_data mi_un.un_sia.sia_gp_data
259 #define mi_gpcontrol mi_un.un_gpr.gpr_gpcontrol
260 #define mi_gpdata mi_un.un_gpr.gpr_gpdata
261 #define mi_actmask mi_un.un_gpr.gpr_actmask
262 #define mi_actdata mi_un.un_gpr.gpr_actdata
263 #define mi_default mi_un.un_gpr.gpr_default
264 #define mi_cmdmode mi_un.un_gpr.gpr_cmdmode
266 #define mi_phyaddr mi_un.un_mii.mii_phyaddr
267 #define mi_gpr_length mi_un.un_mii.mii_gpr_length
268 #define mi_gpr_offset mi_un.un_mii.mii_gpr_offset
269 #define mi_reset_length mi_un.un_mii.mii_reset_length
270 #define mi_reset_offset mi_un.un_mii.mii_reset_offset
271 #define mi_capabilities mi_un.un_mii.mii_capabilities
272 #define mi_advertisement mi_un.un_mii.mii_advertisement
273 #define mi_full_duplex mi_un.un_mii.mii_full_duplex
274 #define mi_tx_threshold mi_un.un_mii.mii_tx_threshold
275 #define mi_mediamask mi_un.un_mii.mii_mediamask
276 #define mi_mii_interrupt mi_un.un_mii.mii_interrupt
277 #define mi_phyid mi_un.un_mii.mii_phyid
279 #define TULIP_MEDIAINFO_SIA_INIT(sc, mi, chipid, media) do { \
280 (mi)->mi_type = TULIP_MEDIAINFO_SIA; \
281 sc->tulip_mediums[TULIP_MEDIA_ ## media] = (mi); \
282 (mi)->mi_sia_connectivity = TULIP_ ## chipid ## _SIACONN_ ## media; \
283 (mi)->mi_sia_tx_rx = TULIP_ ## chipid ## _SIATXRX_ ## media; \
284 (mi)->mi_sia_general = TULIP_ ## chipid ## _SIAGEN_ ## media; \
287 #define TULIP_MEDIAINFO_ADD_CAPABILITY(sc, mi, media) do { \
288 if ((sc)->tulip_mediums[TULIP_MEDIA_ ## media] == NULL \
289 && ((mi)->mi_capabilities & PHYSTS_ ## media)) { \
290 (sc)->tulip_mediums[TULIP_MEDIA_ ## media] = (mi); \
291 (mi)->mi_mediamask |= TULIP_BIT(TULIP_MEDIA_ ## media); \
295 #define TULIP_MII_NOPHY 32
297 * Some boards need to treated specially. The following enumeration
298 * identifies the cards with quirks (or those we just want to single
299 * out for special merit or scorn).
302 TULIP_21040_GENERIC, /* Generic 21040 (works with most any board) */
303 TULIP_21140_ISV, /* Digital Semicondutor 21140 ISV SROM Format */
304 TULIP_21142_ISV, /* Digital Semicondutor 21142 ISV SROM Format */
305 TULIP_21143_ISV, /* Digital Semicondutor 21143 ISV SROM Format */
306 TULIP_21140_DEC_EB, /* Digital Semicondutor 21140 Evaluation Board */
307 TULIP_21140_MII, /* 21140[A] with MII */
308 TULIP_21140_DEC_DE500, /* Digital DE500-?? 10/100 */
309 TULIP_21140_SMC_9332, /* SMC 9332 */
310 TULIP_21140_COGENT_EM100, /* Cogent EM100 100 only */
311 TULIP_21140_ZNYX_ZX34X, /* ZNYX ZX342 10/100 */
312 TULIP_21140_ASANTE, /* AsanteFast 10/100 */
313 TULIP_21140_EN1207, /* Accton EN2107 10/100 BNC */
314 TULIP_21041_GENERIC /* Generic 21041 card */
318 TULIP_MEDIAPOLL_TIMER, /* 100ms timer fired */
319 TULIP_MEDIAPOLL_FASTTIMER, /* <100ms timer fired */
320 TULIP_MEDIAPOLL_LINKFAIL, /* called from interrupt routine */
321 TULIP_MEDIAPOLL_LINKPASS, /* called from interrupt routine */
322 TULIP_MEDIAPOLL_START, /* start a media probe (called from reset) */
323 TULIP_MEDIAPOLL_TXPROBE_OK, /* txprobe succeeded */
324 TULIP_MEDIAPOLL_TXPROBE_FAILED, /* txprobe failed */
326 } tulip_mediapoll_event_t;
329 TULIP_LINK_DOWN, /* Link is down */
330 TULIP_LINK_UP, /* link is ok */
331 TULIP_LINK_UNKNOWN /* we can't tell either way */
332 } tulip_link_status_t;
336 * This data structure is used to abstract out the quirks.
337 * media_probe = tries to determine the media type.
338 * media_select = enables the current media (or autosenses)
339 * media_poll = autosenses media
340 * media_preset = 21140, etal requires bit to set before the
341 * the software reset; hence pre-set. Should be
342 * pre-reset but that's ugly.
346 tulip_board_t bd_type;
347 void (*bd_media_probe)(tulip_softc_t * const sc);
348 void (*bd_media_select)(tulip_softc_t * const sc);
349 void (*bd_media_poll)(tulip_softc_t * const sc, tulip_mediapoll_event_t event);
350 void (*bd_media_preset)(tulip_softc_t * const sc);
354 * The next few declarations are for MII/PHY based board.
356 * The first enumeration identifies a superset of various datums
357 * that can be obtained from various PHY chips. Not all PHYs will
358 * support all datums.
359 * The modedata structure indicates what register contains
360 * a datum, what mask is applied the register contents, and what the
362 * The attr structure records information about a supported PHY.
363 * The phy structure records information about a PHY instance.
378 } tulip_phy_modedata_t;
382 u_int16_t attr_flags;
383 #define PHY_NEED_HARD_RESET 0x0001
384 #define PHY_DUAL_CYCLE_TA 0x0002
385 tulip_phy_modedata_t attr_modes[PHY_MODE_MAX];
389 * Various probe states used when trying to autosense the media.
393 TULIP_PROBE_INACTIVE,
394 TULIP_PROBE_PHYRESET,
395 TULIP_PROBE_PHYAUTONEG,
397 TULIP_PROBE_MEDIATEST,
399 } tulip_probe_state_t;
403 * Transmit Statistics
405 u_int32_t dot3StatsSingleCollisionFrames;
406 u_int32_t dot3StatsMultipleCollisionFrames;
407 u_int32_t dot3StatsSQETestErrors;
408 u_int32_t dot3StatsDeferredTransmissions;
409 u_int32_t dot3StatsLateCollisions;
410 u_int32_t dot3StatsExcessiveCollisions;
411 u_int32_t dot3StatsCarrierSenseErrors;
412 u_int32_t dot3StatsInternalMacTransmitErrors;
413 u_int32_t dot3StatsInternalTransmitUnderflows; /* not in rfc1650! */
414 u_int32_t dot3StatsInternalTransmitBabbles; /* not in rfc1650! */
418 u_int32_t dot3StatsMissedFrames; /* not in rfc1650! */
419 u_int32_t dot3StatsAlignmentErrors;
420 u_int32_t dot3StatsFCSErrors;
421 u_int32_t dot3StatsFrameTooLongs;
422 u_int32_t dot3StatsInternalMacReceiveErrors;
423 } tulip_dot3_stats_t;
426 * Now to important stuff. This is softc structure (where does softc
427 * come from??? No idea) for the tulip device.
429 struct _tulip_softc_t {
430 struct arpcom tulip_ac;
431 struct ifmedia tulip_ifmedia;
432 struct callout tulip_timer;
433 struct callout tulip_fast_timer;
434 bus_space_tag_t tulip_csrs_bst;
435 bus_space_handle_t tulip_csrs_bsh;
436 tulip_regfile_t tulip_csrs;
437 u_int32_t tulip_flags;
438 #define TULIP_WANTSETUP 0x00000001
439 #define TULIP_WANTHASHPERFECT 0x00000002
440 #define TULIP_WANTHASHONLY 0x00000004
441 #define TULIP_DOINGSETUP 0x00000008
442 #define TULIP_PRINTMEDIA 0x00000010
443 #define TULIP_TXPROBE_ACTIVE 0x00000020
444 #define TULIP_ALLMULTI 0x00000040
445 #define TULIP_WANTRXACT 0x00000080
446 #define TULIP_RXACT 0x00000100
447 #define TULIP_INRESET 0x00000200
448 #define TULIP_NEEDRESET 0x00000400
449 #define TULIP_SQETEST 0x00000800
450 #define TULIP_xxxxxx0 0x00001000
451 #define TULIP_xxxxxx1 0x00002000
452 #define TULIP_WANTTXSTART 0x00004000
453 #define TULIP_NEWTXTHRESH 0x00008000
454 #define TULIP_NOAUTOSENSE 0x00010000
455 #define TULIP_PRINTLINKUP 0x00020000
456 #define TULIP_LINKUP 0x00040000
457 #define TULIP_RXBUFSLOW 0x00080000
458 #define TULIP_NOMESSAGES 0x00100000
459 #define TULIP_SYSTEMERROR 0x00200000
460 #define TULIP_TIMEOUTPENDING 0x00400000
461 #define TULIP_xxxxxx2 0x00800000
462 #define TULIP_TRYNWAY 0x01000000
463 #define TULIP_DIDNWAY 0x02000000
464 #define TULIP_RXIGNORE 0x04000000
465 #define TULIP_PROBE1STPASS 0x08000000
466 #define TULIP_DEVICEPROBE 0x10000000
467 #define TULIP_PROMISC 0x20000000
468 #define TULIP_HASHONLY 0x40000000
469 #define TULIP_xxxxxx3 0x80000000
470 /* only 4 bits left! */
471 u_int32_t tulip_features; /* static bits indicating features of chip */
472 #define TULIP_HAVE_GPR 0x00000001 /* have gp register (140[A]) */
473 #define TULIP_HAVE_RXBADOVRFLW 0x00000002 /* RX corrupts on overflow */
474 #define TULIP_HAVE_POWERMGMT 0x00000004 /* Snooze/sleep modes */
475 #define TULIP_HAVE_MII 0x00000008 /* Some medium on MII */
476 #define TULIP_HAVE_SIANWAY 0x00000010 /* SIA does NWAY */
477 #define TULIP_HAVE_DUALSENSE 0x00000020 /* SIA senses both AUI & TP */
478 #define TULIP_HAVE_SIAGP 0x00000040 /* SIA has a GP port */
479 #define TULIP_HAVE_BROKEN_HASH 0x00000080 /* Broken Multicast Hash */
480 #define TULIP_HAVE_ISVSROM 0x00000100 /* uses ISV SROM Format */
481 #define TULIP_HAVE_BASEROM 0x00000200 /* Board ROM can be cloned */
482 #define TULIP_HAVE_SLAVEDROM 0x00000400 /* Board ROM cloned */
483 #define TULIP_HAVE_SLAVEDINTR 0x00000800 /* Board slaved interrupt */
484 #define TULIP_HAVE_SHAREDINTR 0x00001000 /* Board shares interrupts */
485 #define TULIP_HAVE_OKROM 0x00002000 /* ROM was recognized */
486 #define TULIP_HAVE_NOMEDIA 0x00004000 /* did not detect any media */
487 #define TULIP_HAVE_STOREFWD 0x00008000 /* have CMD_STOREFWD */
488 #define TULIP_HAVE_SIA100 0x00010000 /* has LS100 in SIA status */
489 #define TULIP_HAVE_OKSROM 0x00020000 /* SROM CRC is OK */
490 u_int32_t tulip_intrmask; /* our copy of csr_intr */
491 u_int32_t tulip_cmdmode; /* our copy of csr_cmdmode */
492 u_int32_t tulip_last_system_error : 3; /* last system error (only value is TULIP_SYSTEMERROR is also set) */
493 u_int32_t tulip_txtimer : 2; /* transmission timer */
494 u_int32_t tulip_system_errors; /* number of system errors encountered */
495 u_int32_t tulip_statusbits; /* status bits from CSR5 that may need to be printed */
497 tulip_media_info_t *tulip_mediums[TULIP_MEDIA_MAX]; /* indexes into mediainfo */
498 tulip_media_t tulip_media; /* current media type */
499 u_int32_t tulip_abilities; /* remote system's abiltities (as defined in IEEE 802.3u) */
501 u_int8_t tulip_revinfo; /* revision of chip */
502 u_int8_t tulip_phyaddr; /* 0..31 -- address of current phy */
503 u_int8_t tulip_gpinit; /* active pins on 21140 */
504 u_int8_t tulip_gpdata; /* default gpdata for 21140 */
507 u_int8_t probe_count; /* count of probe operations */
508 int32_t probe_timeout; /* time in ms of probe timeout */
509 tulip_probe_state_t probe_state; /* current media probe state */
510 tulip_media_t probe_media; /* current media being probed */
511 u_int32_t probe_mediamask; /* medias checked */
512 u_int32_t probe_passes; /* times autosense failed */
513 u_int32_t probe_txprobes; /* txprobes attempted */
515 #define tulip_probe_count tulip_probe.probe_count
516 #define tulip_probe_timeout tulip_probe.probe_timeout
517 #define tulip_probe_state tulip_probe.probe_state
518 #define tulip_probe_media tulip_probe.probe_media
519 #define tulip_probe_mediamask tulip_probe.probe_mediamask
520 #define tulip_probe_passes tulip_probe.probe_passes
522 tulip_chipid_t tulip_chipid; /* type of chip we are using */
523 const tulip_boardsw_t *tulip_boardsw; /* board/chip characteristics */
524 tulip_softc_t *tulip_slaves; /* slaved devices (ZX3xx) */
525 struct ifqueue tulip_txq;
526 struct ifqueue tulip_rxq;
527 tulip_dot3_stats_t tulip_dot3stats;
528 tulip_ringinfo_t tulip_rxinfo;
529 tulip_ringinfo_t tulip_txinfo;
530 tulip_media_info_t tulip_mediainfo[10];
532 * The setup buffers for sending the setup frame to the chip.
533 * one is the one being sent while the other is the one being
536 u_int32_t tulip_setupbuf[192/sizeof(u_int32_t)];
537 u_int32_t tulip_setupdata[192/sizeof(u_int32_t)];
538 char tulip_boardid[16]; /* buffer for board ID */
539 u_int8_t tulip_rombuf[128];
540 u_int8_t tulip_pci_busno; /* needed for multiport boards */
541 u_int8_t tulip_pci_devno; /* needed for multiport boards */
542 u_int8_t tulip_connidx;
543 tulip_srom_connection_t tulip_conntype;
544 tulip_desc_t *tulip_rxdescs;
545 tulip_desc_t *tulip_txdescs;
549 #define TULIP_DO_AUTOSENSE(sc) (IFM_SUBTYPE((sc)->tulip_ifmedia.ifm_media) == IFM_AUTO)
552 static const char * const tulip_chipdescs[] = {
555 "21140 [10-100Mb/s]",
556 "21140A [10-100Mb/s]",
557 "21142 [10-100Mb/s]",
558 "21143 [10-100Mb/s]",
561 static const char * const tulip_mediums[] = {
562 "unknown", /* TULIP_MEDIA_UNKNOWN */
563 "10baseT", /* TULIP_MEDIA_10BASET */
564 "Full Duplex 10baseT", /* TULIP_MEDIA_10BASET_FD */
565 "BNC", /* TULIP_MEDIA_BNC */
566 "AUI", /* TULIP_MEDIA_AUI */
567 "External SIA", /* TULIP_MEDIA_EXTSIA */
568 "AUI/BNC", /* TULIP_MEDIA_AUIBNC */
569 "100baseTX", /* TULIP_MEDIA_100BASET */
570 "Full Duplex 100baseTX", /* TULIP_MEDIA_100BASET_FD */
571 "100baseT4", /* TULIP_MEDIA_100BASET4 */
572 "100baseFX", /* TULIP_MEDIA_100BASEFX */
573 "Full Duplex 100baseFX", /* TULIP_MEDIA_100BASEFX_FD */
576 static const int tulip_media_to_ifmedia[] = {
577 IFM_ETHER | IFM_NONE, /* TULIP_MEDIA_UNKNOWN */
578 IFM_ETHER | IFM_10_T, /* TULIP_MEDIA_10BASET */
579 IFM_ETHER | IFM_10_T | IFM_FDX, /* TULIP_MEDIA_10BASET_FD */
580 IFM_ETHER | IFM_10_2, /* TULIP_MEDIA_BNC */
581 IFM_ETHER | IFM_10_5, /* TULIP_MEDIA_AUI */
582 IFM_ETHER | IFM_MANUAL, /* TULIP_MEDIA_EXTSIA */
583 IFM_ETHER | IFM_10_5, /* TULIP_MEDIA_AUIBNC */
584 IFM_ETHER | IFM_100_TX, /* TULIP_MEDIA_100BASET */
585 IFM_ETHER | IFM_100_TX | IFM_FDX, /* TULIP_MEDIA_100BASET_FD */
586 IFM_ETHER | IFM_100_T4, /* TULIP_MEDIA_100BASET4 */
587 IFM_ETHER | IFM_100_FX, /* TULIP_MEDIA_100BASEFX */
588 IFM_ETHER | IFM_100_FX | IFM_FDX, /* TULIP_MEDIA_100BASEFX_FD */
591 static const char * const tulip_system_errors[] = {
602 static const char * const tulip_status_bits[] = {
604 "transmit process stopped",
606 "transmit jabber timeout",
609 "transmit underflow",
613 "receive process stopped",
614 "receive watchdog timeout",
623 static const struct {
624 tulip_srom_connection_t sc_type;
625 tulip_media_t sc_media;
627 } tulip_srom_conninfo[] = {
628 { TULIP_SROM_CONNTYPE_10BASET, TULIP_MEDIA_10BASET },
629 { TULIP_SROM_CONNTYPE_BNC, TULIP_MEDIA_BNC },
630 { TULIP_SROM_CONNTYPE_AUI, TULIP_MEDIA_AUI },
631 { TULIP_SROM_CONNTYPE_100BASETX, TULIP_MEDIA_100BASETX },
632 { TULIP_SROM_CONNTYPE_100BASET4, TULIP_MEDIA_100BASET4 },
633 { TULIP_SROM_CONNTYPE_100BASEFX, TULIP_MEDIA_100BASEFX },
634 { TULIP_SROM_CONNTYPE_MII_10BASET, TULIP_MEDIA_10BASET,
635 TULIP_SROM_ATTR_MII },
636 { TULIP_SROM_CONNTYPE_MII_100BASETX, TULIP_MEDIA_100BASETX,
637 TULIP_SROM_ATTR_MII },
638 { TULIP_SROM_CONNTYPE_MII_100BASET4, TULIP_MEDIA_100BASET4,
639 TULIP_SROM_ATTR_MII },
640 { TULIP_SROM_CONNTYPE_MII_100BASEFX, TULIP_MEDIA_100BASEFX,
641 TULIP_SROM_ATTR_MII },
642 { TULIP_SROM_CONNTYPE_10BASET_NWAY, TULIP_MEDIA_10BASET,
643 TULIP_SROM_ATTR_NWAY },
644 { TULIP_SROM_CONNTYPE_10BASET_FD, TULIP_MEDIA_10BASET_FD },
645 { TULIP_SROM_CONNTYPE_MII_10BASET_FD, TULIP_MEDIA_10BASET_FD,
646 TULIP_SROM_ATTR_MII },
647 { TULIP_SROM_CONNTYPE_100BASETX_FD, TULIP_MEDIA_100BASETX_FD },
648 { TULIP_SROM_CONNTYPE_MII_100BASETX_FD, TULIP_MEDIA_100BASETX_FD,
649 TULIP_SROM_ATTR_MII },
650 { TULIP_SROM_CONNTYPE_10BASET_NOLINKPASS, TULIP_MEDIA_10BASET,
651 TULIP_SROM_ATTR_NOLINKPASS },
652 { TULIP_SROM_CONNTYPE_AUTOSENSE, TULIP_MEDIA_UNKNOWN,
653 TULIP_SROM_ATTR_AUTOSENSE },
654 { TULIP_SROM_CONNTYPE_AUTOSENSE_POWERUP, TULIP_MEDIA_UNKNOWN,
655 TULIP_SROM_ATTR_AUTOSENSE|TULIP_SROM_ATTR_POWERUP },
656 { TULIP_SROM_CONNTYPE_AUTOSENSE_NWAY, TULIP_MEDIA_UNKNOWN,
657 TULIP_SROM_ATTR_AUTOSENSE|TULIP_SROM_ATTR_NWAY },
658 { TULIP_SROM_CONNTYPE_NOT_USED, TULIP_MEDIA_UNKNOWN }
660 #define TULIP_SROM_LASTCONNIDX (NELEM(tulip_srom_conninfo) - 1)
662 static const struct {
663 tulip_media_t sm_type;
664 tulip_srom_media_t sm_srom_type;
665 } tulip_srom_mediums[] = {
666 { TULIP_MEDIA_100BASEFX_FD, TULIP_SROM_MEDIA_100BASEFX_FD },
667 { TULIP_MEDIA_100BASEFX, TULIP_SROM_MEDIA_100BASEFX },
668 { TULIP_MEDIA_100BASET4, TULIP_SROM_MEDIA_100BASET4 },
669 { TULIP_MEDIA_100BASETX_FD, TULIP_SROM_MEDIA_100BASETX_FD },
670 { TULIP_MEDIA_100BASETX, TULIP_SROM_MEDIA_100BASETX },
671 { TULIP_MEDIA_10BASET_FD, TULIP_SROM_MEDIA_10BASET_FD },
672 { TULIP_MEDIA_AUI, TULIP_SROM_MEDIA_AUI },
673 { TULIP_MEDIA_BNC, TULIP_SROM_MEDIA_BNC },
674 { TULIP_MEDIA_10BASET, TULIP_SROM_MEDIA_10BASET },
675 { TULIP_MEDIA_UNKNOWN }
679 * This driver supports a maximum of 32 tulip boards.
680 * This should be enough for the forseeable future.
682 #define TULIP_MAX_DEVICES 32
684 #define TULIP_RXDESC_PRESYNC(sc, di, s) do { } while (0)
685 #define TULIP_RXDESC_POSTSYNC(sc, di, s) do { } while (0)
686 #define TULIP_RXMAP_PRESYNC(sc, map) do { } while (0)
687 #define TULIP_RXMAP_POSTSYNC(sc, map) do { } while (0)
688 #define TULIP_RXMAP_CREATE(sc, mapp) do { } while (0)
690 #define TULIP_TXDESC_PRESYNC(sc, di, s) do { } while (0)
691 #define TULIP_TXDESC_POSTSYNC(sc, di, s) do { } while (0)
692 #define TULIP_TXMAP_PRESYNC(sc, map) do { } while (0)
693 #define TULIP_TXMAP_POSTSYNC(sc, map) do { } while (0)
694 #define TULIP_TXMAP_CREATE(sc, mapp) do { } while (0)
697 #define SIOCGADDRROM _IOW('i', 240, struct ifreq) /* get 128 bytes of ROM */
698 #define SIOCGCHIPID _IOWR('i', 241, struct ifreq) /* get chipid */
701 #define loudprintf if (bootverbose) kprintf
704 #define tulip_if tulip_ac.ac_if
707 #define tulip_enaddr tulip_ac.ac_enaddr
710 #if !defined(TULIP_KVATOPHYS)
711 #define TULIP_KVATOPHYS(sc, va) vtophys(va)
714 #define TULIP_MAX_TXSEG 30
716 #endif /* !defined(_DEVAR_H) */