1 # $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
2 # $DragonFly: src/etc/defaults/make.conf,v 1.12 2005/03/01 18:45:37 asmodai Exp $
4 # NOTE: Please would any committer updating this file also update the
5 # make.conf(5) manual page, if necessary, which is located in
6 # src/share/man/man5/make.conf.5.
8 # This file, if present, will be read by make (see /usr/share/mk/sys.mk).
9 # It allows you to override macro definitions to make without changing
10 # your source tree, or anything the source tree installs.
12 # This file must be in valid Makefile syntax.
14 # You have to find the things you can put here in the Makefiles and
15 # documentation of the source tree.
18 # The CPUTYPE variable controls which processor should be targeted for
19 # generated code. This controls processor-specific optimizations in
20 # certain code (currently only OpenSSL) as well as modifying the value
21 # of CFLAGS to contain the appropriate optimization directive to gcc.
22 # The automatic setting of CFLAGS may be overridden using the
23 # NO_CPU_CFLAGS variable below.
24 # Currently the following CPU types are recognized:
25 # Intel x86 architecture:
26 # (AMD CPUs) k7 k6-2 k6 k5
27 # (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386
29 # If you experience any problems after setting this flag, please unset
30 # it again before submitting a bug report or attempting to modify code.
31 # It may be that certain types of software will become unstable after being
32 # compiled with processor-specific (or higher - see below) optimization flags.
33 # If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
36 #NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
37 #NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
39 # The CCVER variable controls which GCC-version to use by default. It
40 # should be set using ?= so as not to interfere with CCVER overrides from
41 # userland or the buildworld. We currently recommend that an override NOT
42 # be set in /etc/make.conf and that gcc 3.4 not yet be used to build the boot
43 # blocks, boot loader, or the kernel.
45 # CCVER?=gcc2 # (use GCC 2.95.x, default)
46 # CCVER?=gcc34 # (use GCC 3.4, experimental)
49 # CFLAGS controls the compiler settings used when compiling C code.
50 # Note that optimization settings above -O (-O2, ...) are not recommended
51 # or supported for compiling the world or the kernel - please revert any
52 # nonstandard optimization settings to "-O" before submitting bug reports
57 # CXXFLAGS controls the compiler settings used when compiling C++ code.
58 # Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
59 # to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
60 # alone will remove the often needed contents of CFLAGS from CXXFLAGS.
62 #CXXFLAGS+= -fmemoize-lookups -fsave-memoized
64 # BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
65 # for use in developing FreeBSD and testing changes. They can be used by
66 # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
67 # included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
69 BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
70 -Wcast-qual -Wchar-subscripts -Winline \
71 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
72 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
74 # WARNS_WERROR causes -Werror to be added when WARNS is in effect.
78 # To compile just the kernel with special optimizations, you should use
79 # this instead of CFLAGS (which is not applicable to kernel builds anyway).
80 # There is very little to gain by using higher optimization levels, and doing
81 # so can cause problems.
85 # Strip the file before installing. Setting this to nothing will keep
86 # the debugging symbols in the installed files.
89 # Compare before install
92 # To enable installing suidperl with the setuid bit turned on
93 #ENABLE_SUIDPERL= true
95 # To build ppp with normal permissions
98 # To enable installing ssh(1) with the setuid bit turned on
99 #ENABLE_SUID_SSH= true
101 # To avoid building various parts of the base system:
102 #NO_CVS= true # do not build CVS
103 #NO_BIND= true # do not build BIND
104 #NO_FORTRAN= true # do not build g77 and related libraries
105 #NO_I4B= true # do not build isdn4bsd package
106 #NO_IPFILTER= true # do not build IP Filter package
107 #NO_LPR= true # do not build lpr and related programs
108 #NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
109 #NO_MODULES= true # do not build modules with the kernel
110 #NO_OBJC= true # do not build Objective C support
111 #NO_OPENSSH= true # do not build OpenSSH
112 #NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
113 #NO_SENDMAIL= true # do not build sendmail and related programs
114 #NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs
115 #NO_X= true # do not compile in XWindows support (e.g. doscmd)
116 #NOCRYPT= true # do not build any crypto code
117 #NOGAMES= true # do not build games (games/ subdir)
118 #NOINFO= true # do not make or install info files
119 #NOLIBC_R= true # do not build libc_r (re-entrant version of libc)
120 #NOMAN= true # do not build manual pages
121 #NOPROFILE= true # Avoid compiling profiled libraries
122 #NOSHARE= true # do not go into the share subdir
124 # To build sys/modules when building the world (our old way of doing things)
125 #MODULES_WITH_WORLD=true # do not build modules when building kernel
127 # The list of modules to build instead of all of them.
128 #MODULES_OVERRIDE= emulation/linux net/ipfw
130 # The following controls building optional IDEA code in libcrypto and
131 # certain ports. Patents are involved - you must not use this unless
132 # you either have a license or fall within patent 'fair use'
135 # *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
137 # IDEA is patented in the USA and many European countries - thought to
138 # be OK to use for any non-commercial use. This is optional.
139 #MAKE_IDEA= YES # IDEA (128 bit symmetric encryption)
141 # To avoid running MAKEDEV all on /dev during install:
144 # If you do not want unformatted manual pages to be compressed
145 # when they are installed:
150 # If you want the "compat" shared libraries installed as part of your normal
151 # builds, uncomment these:
161 # If you do not want additional documentation (some of which are
162 # a few hundred KB's) for ports to be installed:
167 # Default format for system documentation, depends on your printer.
168 # Set this to "ascii" for simple printers or screen
173 # How long to wait for a console keypress before booting the default kernel.
174 # This value is approximately in milliseconds. Keypresses are accepted by the
175 # BIOS before booting from disk, making it possible to give custom boot
176 # parameters even when this is set to 0.
181 # By default, the system will always use the keyboard/video card as system
182 # console. However, the boot blocks may be dynamically configured to use a
183 # serial port in addition to or instead of the keyboard/video console.
185 # By default we use COM1 as our serial console port *if* we're going to use
186 # a serial port as our console at all. Alter as necessary.
188 # COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
190 #BOOT_COMCONSOLE_PORT= 0x3F8
192 # The default serial console speed is 9600. Set the speed to a larger value
193 # for better interactive response.
195 #BOOT_COMCONSOLE_SPEED= 115200
197 # By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
198 # this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
199 # via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
200 # still mount the server's '/' (i.e. rather than load the server's kernel).
202 #LOADER_TFTP_SUPPORT= YES
204 # By default, the ports collection attempts to use XFree86 4.X. If
205 # you are running XFree86 3.3.X, uncomment this line.
209 # By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier.
210 # If you have a XFree86 from before 3.0 that has the X distribution in
211 # /usr/X386, you want to uncomment this.
216 # If you have Motif on your system, uncomment this.
221 # If the default location of the Motif library (specified below) is NOT
222 # appropriate for you, uncomment this and change it to the correct value.
223 # If your motif is in ${X11BASE}/lib, you don't need to touch this line.
225 #MOTIFLIB= -L${X11BASE}/lib -lXm
228 # If you're resident in the USA, this will help various ports to determine
229 # whether or not they should attempt to comply with the various U.S.
230 # export regulations on certain types of software which do not apply to
231 # anyone else in the world.
236 # Override "don't install a port that's already installed" behavior.
237 # One might wish to do this for ports debugging or to unconditionally
238 # reinstall a set of suspect/broken ports.
240 #FORCE_PKG_REGISTER= YES
243 # If you're behind a firewall and need FTP or HTTP proxy services for
244 # ports collection fetching to work, the following examples give the
245 # necessary syntax. See the fetch(3) man page for details.
247 #FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21
248 #FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80
253 # If you want your port fetches to go somewhere else than the default
254 # (specified below) in case the distfile/patchfile was not found,
255 # uncomment this and change it to a location nearest you. (Don't
256 # remove the "/${DIST_SUBDIR}/" part.)
258 #MASTER_SITE_BACKUP?= \
259 # ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
261 # If you want your port fetches to check the above site first (before
262 # the MASTER_SITES specified in the port Makefiles), uncomment the
263 # line below. You can also change the right side to point to wherever
266 #MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP}
268 # Some ports use a special variable to point to a collection of
269 # mirrors of well-known software archives. If you have a mirror close
270 # to you, uncomment any of the following lines and change it to that
271 # address. (Don't remove the "/%SUBDIR%/" part.)
273 # Note: the right hand sides of the following lines are only for your
274 # information. For a full list of default sites, take a look at
277 #MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/
278 #MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/
279 #MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/
280 #MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/
281 #MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/
282 #MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/
283 #MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/
284 #MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/
285 #MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/
286 #MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/
287 #MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/
288 #MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/
289 #MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/
290 #MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/
291 #MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/
292 #MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/
293 #MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/
294 #MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/
295 #MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/
296 #MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/
297 #MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/
298 #MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/
299 #MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/
301 # Also it is highly recommended that you configure MASTER_SORT_REGEX
302 # to choose better mirror sites for you. List awk(1)-style regular
303 # expressions separated by space so MASTER_SITES will be sorted in
304 # that order. The following example is for Japanese users; change
305 # "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names
306 # of your nearest/upstream networks to meet your needs.
308 #MASTER_SORT_REGEX?= ://[^/]*\.jp[/.]
310 # Ports can place their working directories somewhere other than under
312 #WRKDIRPREFIX= /var/tmp
315 # If you want Kerberos 5 (KTH Heimdal), define this:
319 # Kerberos 5 su (k5su)
320 # If you want to use the k5su utility, define this to have it installed
322 #ENABLE_SUID_K5SU= yes
326 # If you want to install MIT Kerberos5 port somewhere other than /usr/local,
327 # define this (this is also used to tell ssh1 that kerberos is needed):
329 #KRB5_HOME= /usr/local
332 # CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
333 # file(s) you use on your site (see /usr/share/examples/cvsup/README for more
334 # information on CVSup and these files). To use, do "make update" in /usr/src.
338 #SUP= /usr/local/bin/cvsup
340 #SUPHOST= cvsup.uk.FreeBSD.org
341 #SUPFILE= /usr/share/examples/cvsup/stable-supfile
342 #PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile
343 #DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
345 # top(1) uses a hash table for the user names. The size of this hash
346 # can be tuned to match the number of local users. The table size should
347 # be a prime number approximately twice as large as the number of lines in
348 # /etc/passwd. The default number is 20011.
354 # The list of languages and encodings to build and install
356 #DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
361 # The following sets the default m4 configuration file to use at
362 # install time. Use with caution as a make install will overwrite
363 # any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
364 # deprecated. The value should be a fully qualified path name.
365 # Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
366 # create /etc/mail/sendmail.cf before installworld installs an
367 # updated sendmail binary.
369 #SENDMAIL_MC=/etc/mail/myconfig.mc
371 # The following sets the default m4 configuration file for mail
372 # submission to use at install time. Use with caution as a make
373 # install will overwrite any existing /etc/mail/submit.cf. The
374 # value should be a fully qualified path name.
375 # Avoid using a value of /etc/mail/submit.mc as a buildworld will
376 # create /etc/mail/submit.cf before installworld installs an
377 # updated sendmail binary.
379 #SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
381 # If you need to build additional .cf files during a make buildworld,
382 # include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
383 # Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
384 # create /etc/mail/sendmail.cf before installworld installs an
385 # updated sendmail binary.
387 #SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
389 # Setting the following variable modifies the flags passed to m4 when
390 # building a .cf file from a .mc file. It can be used to enable
391 # features disabled by default.
395 # Setting the following variables modifies the build environment for
396 # sendmail and its related utilities. For example, SASL support can be
397 # added with settings such as:
400 # SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
401 # SENDMAIL_LDFLAGS=-L/usr/local/lib
402 # SENDMAIL_LDADD=-lsasl
405 # SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
406 # SENDMAIL_LDFLAGS=-L/usr/local/lib
407 # SENDMAIL_LDADD=-lsasl2
409 # Note: If you are using Cyrus SASL with other applications which require
410 # access to the sasldb file, you should add the following to your
413 # define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
420 # Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
421 # set-user-ID root binary instead of a set-group-ID smmsp binary and will
422 # prevent the installation of /etc/mail/submit.cf.
423 # This is a deprecated mode of operation. See etc/mail/README for more
426 #SENDMAIL_SET_USER_ID=
428 # The permissions to use on alias and map databases generated using
429 # /etc/mail/Makefile. Defaults to 0640.