3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
18 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info="YES" # Enables display of informational messages at boot.
26 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
27 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
28 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
29 powerd_enable="NO" # Run powerd to adjust CPU speed.
30 powerd_flags="" # additional flags for powerd(8).
31 sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes.
32 sensorsd_flags="" # additional flags for sensorsd(8).
33 hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging.
34 hotplugd_flags="" # additional flags for hotplugd(8)
35 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
36 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
37 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
38 local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d"
39 # startup script dirs.
40 script_name_sep=" " # Change if your startup scripts' names contain spaces
41 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
42 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
43 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
44 extra_netfs_types="NO" # List of network extra filesystem types for delayed
45 # mount at startup (or NO).
46 devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf"
47 # Config files for devfs(5)
49 ##############################################################
50 ### Network configuration sub-section ######################
51 ##############################################################
53 ### Basic network and firewall/security options: ###
55 # see 'man firewall' for an explanation of the default firewall rules
57 hostname="" # Set this!
58 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
59 dhcpcd_enable="NO" # Set to YES to run dhcpcd in master mode.
60 dhcpcd_program="/sbin/dhcpcd"
62 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
63 dhclient_flags="-w" # Additional flags to pass to dhcp client.
64 firewall_enable="NO" # Set to YES to enable firewall functionality
65 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
66 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
67 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
68 firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
69 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
70 firewall_open_tcp_ports="22 25 53 80 113 443"
71 firewall_open_udp_ports="53"
72 firewall_quiet="NO" # Set to YES to suppress rule display
73 firewall_logging="NO" # Set to YES to enable events logging
74 firewall_flags="" # Flags passed to ipfw when type is a file
75 ipfw3_enable="NO" # Set to YES to enable ipfw3(8) firewall
76 ipfw3_program="/sbin/ipfw3" # where the ipfw3 program lives
77 ipfw3_script="/etc/ipfw3.rules" # Script to run to set up the firewall rules
78 ipfw3_modules="ipfw3 ipfw3_basic" # IPFW3 modules to be loaded
79 ip_portrange_first="NO" # Set first dynamically allocated port
80 ip_portrange_last="NO" # Set last dynamically allocated port
81 natd_program="/sbin/natd" # path to natd, if you want a different one.
82 natd_enable="NO" # Enable natd (if firewall_enable == YES).
83 natd_interface="" # Public interface or IPaddress to use.
84 natd_flags="" # Additional flags for natd.
85 pf_enable="NO" # Set to YES to enable packet filter (pf)
86 pf_rules="/etc/pf.conf" # rules definition file for pf
87 pf_program="/usr/sbin/pfctl" # where the pfctl program lives
88 pf_flags="" # additional flags for pfctl
89 pflog_enable="NO" # Set to YES to enable packet filter logging
90 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
91 pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
92 pflog_flags="" # additional flags for pflogd
93 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
94 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
95 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
96 # For the following option you need to have TCP_DROP_SYNFIN set in your
97 # kernel. Please refer to LINT64 details.
98 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
99 # NOTE: this violates the TCP specification
100 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
101 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
102 network_interfaces="auto" # List of network interfaces (or "auto").
103 cloned_interfaces="" # List of cloned network interfaces to create.
104 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config.
105 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
106 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
107 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
109 # If you have any sppp(4) interfaces above, you might also want to set
110 # the following parameters. Refer to spppcontrol(8) for their meaning.
111 sppp_interfaces="" # List of sppp interfaces.
112 #sppp_interfaces="...0" # example: sppp over ...
113 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
114 gif_interfaces="NO" # List of GIF tunnels (or "NO").
115 #gif_interfaces="gif0 gif1" # Examples typically for a router.
116 # Choose correct tunnel addrs.
117 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
118 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
120 # User ppp configuration.
121 ppp_enable="NO" # Start user-ppp (or NO).
122 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
123 # For details see man page for ppp(8). Default is auto.
124 ppp_nat="YES" # Use PPP's internal network address translation or NO.
125 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
126 ppp_user="root" # Which user to run ppp as
128 ### Network daemon (miscellaneous) ###
129 syslogd_enable="YES" # Run syslog daemon (or NO).
130 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
131 #syslogd_flags="-s" # Flags to syslogd (if enabled).
132 syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
133 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
134 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
135 inetd_flags="-wW" # Optional flags to inetd
137 rwhod_enable="NO" # Run the rwho daemon (or NO).
138 rwhod_flags="" # Flags for rwhod
139 rarpd_enable="NO" # Run rarpd (or NO).
140 rarpd_flags="" # Flags to rarpd.
141 bootparamd_enable="NO" # Run bootparamd (or NO).
142 bootparamd_flags="" # Flags to bootparamd
143 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
144 pppoed_provider="*" # Provider and ppp(8) config file entry.
145 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
146 pppoed_interface="fxp0" # The interface that pppoed runs on.
147 sshd_enable="NO" # Enable sshd
148 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
149 sshd_flags="" # Additional flags for sshd.
151 ftpd_enable="NO" # Run stand-alone ftp daemon (or NO).
152 ftpd_flags="" # Flags for ftpd, -D added implicitly.
154 ### Network File System (NFS): ###
155 ### Server-side options also need rpcbind_enable="YES" ###
157 ### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
158 ### the mtime matches the data cache is left intact.
160 autofs_enable="NO" # Run automountd(8)
161 automount_flags="" # Flags to automount(8) (if autofs enabled).
162 automountd_flags="" # Flags to automountd(8) (if autofs enabled).
163 autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
164 nfs_client_enable="NO" # This host is an NFS client (or NO).
165 nfs_access_cache="5" # Client attribute cache timeout in seconds
166 #nfs_neg_cache="3" # Client attribute negative hit cache timeout
167 nfs_server_enable="NO" # This host is an NFS server (or NO).
168 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
169 mountd_enable="NO" # Run mountd (or NO).
170 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
171 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
172 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
173 nfs_bufpackets="" # bufspace (in packets) for client
174 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
175 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
176 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
177 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
178 rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
179 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
180 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
181 rpcbind_flags="" # Flags to rpcbind (if enabled).
182 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
183 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
184 keyserv_flags="" # Flags to keyserv (if enabled).
186 ### Network Time Services options: ###
187 timed_enable="NO" # Run the time daemon (or NO).
188 timed_flags="" # Flags to timed (if enabled).
189 dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO).
190 dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
191 dntpd_flags="" # Flags to dntpd (if enabled) also server name(s)
193 # Bluetooth deamons and options:
194 btconfig_enable="NO" # Configure Bluetooth devices (or NO).
195 btconfig_devices="" # List of Bluetooth devices (or empty for all).
196 #btconfig_<device>="" # Parameters to pass to <device>.
197 btconfig_args="" # Parameters to pass to all devices.
198 sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO).
199 sdpd_flags="" # Flags to sdpd (if enabled).
200 bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO).
201 bthcid_flags="" # Flags to bthcid (if enabled).
203 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
204 nis_client_enable="NO" # We're an NIS client (or NO).
205 nis_client_flags="" # Flags to ypbind (if enabled).
206 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
207 nis_ypset_flags="" # Flags to ypset (if enabled).
208 nis_server_enable="NO" # We're an NIS server (or NO).
209 nis_server_flags="" # Flags to ypserv (if enabled).
210 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
211 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
212 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
213 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
215 ### Network routing options: ###
216 defaultrouter="NO" # Set to default gateway (or NO).
217 static_routes="" # Set to static route list (or leave empty).
218 gateway_enable="NO" # Set to YES if this host will be a gateway.
219 router_enable="NO" # Set to YES to enable a routing daemon.
220 router_program="/sbin/routed" # Name of routing daemon to use if enabled.
221 router_flags="-q" # Flags for routing daemon.
222 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
223 mrouted_flags="" # Flags for multicast routing daemon.
224 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
225 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
226 accept_sourceroute="NO" # accept source routed packets to us
228 ### Miscellaneous network options: ###
229 icmp_bmcastecho="NO" # respond to broadcast ping packets
231 ### IPv6 options: ###
232 ipv6_enable="NO" # Set to YES to set up for IPv6.
233 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
234 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
235 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
236 ipv6_static_routes="" # Set to static route list (or leave empty).
237 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
238 # route toward loopback interface.
239 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
240 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
241 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
242 ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
243 ipv6_router_flags="" # Flags to IPv6 routing daemon.
244 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
246 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
247 # node, you should stop advertisement.
248 #ipv6_network_interfaces="ed0 ep0" # Examples for router
249 # or static configuration for end node.
250 # Choose correct prefix value.
251 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
252 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
253 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
254 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
255 ipv6_default_interface="NO" # Default output interface for scoped addrs.
256 # Now this works only for IPv6 link local
258 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
259 # advertisement daemon. If set to YES,
260 # this router becomes a possible candidate
261 # IPv6 default router for local subnets.
262 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
263 rtsold_enable="NO" # Set to YES to enable an IPv6 routing
264 # solicitation daemon. This is used for
265 # automatic discovery of non-link local
267 rtsold_flags="-a" # Do autoprobing of outgoing interface.
268 mroute6d_enable="NO" # Do IPv6 multicast routing.
269 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
270 # routing daemon. You need to
271 # install it from package or
273 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
274 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
275 # tunneling interface. Specify this entry
276 # to enable 6to4 interface.
277 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
278 # to limit peer addr range. Effective value
280 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
281 # If you like, you can set "AUTO" for this.
282 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
283 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
285 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
286 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
287 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
288 ipv6_firewall_logging="NO" # Set to YES to enable events logging
289 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
290 ip6addrctl_enable="YES" # Set to YES to enable default address selection
291 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
292 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
293 # (ipv4_prefer, ipv6_prefer, or AUTO)
295 ##############################################################
296 ### System console options #################################
297 ##############################################################
299 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
300 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
301 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
302 keychange="NO" # function keys default values (or NO).
303 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
304 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
305 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
306 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
307 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
308 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
309 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
310 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
311 # specifically overridden in rc.conf(5).
312 moused_enable="NO" # Run the mouse daemon.
313 moused_type="auto" # See man page for rc.conf(5) for available settings.
314 moused_port="/dev/psm0" # Set to your mouse port.
315 moused_flags="" # Any additional flags to moused.
316 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
317 # language code table, specify alternative range
318 # start like mousechar_start=3, see vidcontrol(1)
319 vidhistory="" # Set video history buffer size
320 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
321 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
324 ##############################################################
325 ### Mail Transfer Agent (MTA) options ######################
326 ##############################################################
328 mta_start_script="/etc/rc.sendmail"
329 # Script to start your chosen MTA, called by /etc/rc.
330 # Settings for /etc/rc.sendmail:
331 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
332 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
333 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
334 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
335 # Flags for localhost-only MTA
336 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
337 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
338 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
339 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
340 # Flags for sendmail_msp_queue daemon.
341 sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO).
344 ##############################################################
345 ### Miscellaneous administrative options ###################
346 ##############################################################
348 mixer_enable="YES" # Manage mixer settings across reboots
349 cron_enable="YES" # Run the periodic job daemon.
350 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
351 cron_flags="" # Which options to pass to the cron daemon.
352 lpd_enable="NO" # Run the line printer daemon.
353 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
354 lpd_flags="" # Flags to lpd (if enabled).
355 nscd_enable="NO" # Run the nsswitch caching daemon.
356 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
357 devd_flags="" # Additional flags for devd(8).
358 dumpdev="NO" # Device name to crashdump to (or NO).
359 dumpdir="/var/crash" # Directory where crash dumps are to be stored
360 savecore_flags="" # Used if dumpdev is enabled above, and present.
361 crashinfo_enable="YES" # Automatically generate crash dump summary.
362 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
363 enable_quotas="NO" # turn on quotas on startup (or NO).
364 check_quotas="YES" # Check quotas on startup (or NO).
365 accounting_enable="NO" # Turn on process accounting (or NO).
366 sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO).
367 clear_tmp_enable="NO" # Clear /tmp at startup.
368 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
369 ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib"
370 # shared library search paths
371 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
372 # Local directories with ldconfig configuration files.
373 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
374 update_motd="YES" # update version info in /etc/motd (or NO)
375 start_vinum="NO" # set to YES to start vinum
376 udevd_enable="NO" # Run udevd(8) daemon.
377 udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm).
378 lvm_enable="NO" # Run LVM volume discovery.
379 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
380 entropy_save_sz="16384" # Size of the entropy cache files (in bytes)
381 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
382 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
383 newsyslog_enable="NO" # Run newsyslog at startup.
384 newsyslog_flags="" # Flags to newsyslog (if enabled).
385 resident_enable="NO" # Process /etc/resident.conf
386 varsym_enable="NO" # Process /etc/varsym.conf
387 watchdogd_enable="NO" # Start the software watchdog daemon
389 ##############################################################
390 ### Jail Configuration #######################################
391 ##############################################################
393 jail_enable="NO" # Set to NO to disable starting of any jails
394 jail_list="" # Space separated list of names of jails
395 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
396 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
397 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
400 # To use rc's built-in jail infrastructure create entries for
401 # each jail, specified in jail_list, with the following variables.
403 # - replace 'example' with the jail's name.
404 # - except rootdir, hostname and ip, all of the following variables may be made
405 # global jail variables if you don't specify a jail name (ie. jail_interface).
407 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
408 #jail_example_hostname="default.domain.com" # Jail's hostname
409 #jail_example_ip="192.168.0.10" # Jail's IP number
410 #jail_example_interface="" # Interface to create the IP alias on
411 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
412 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
413 #jail_example_procfs_enable="NO" # mount procfs in jail
414 #jail_example_devfs_enable="NO" # mount devfs in jail
415 #jail_example_mount_enable="NO" # mount/umount jail's fs
416 #jail_example_fstab="" # fstab(5) for mount/umount
417 #jail_example_flags="-l -U root" # flags for jail(8)
419 ##############################################################
420 ### VFS quota options #######################################
421 ##############################################################
423 vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options
424 vfs_quota_sync="" # Space separated list of mount points or "NO"
426 ##############################################################
427 ### VKernel options #########################################
428 ##############################################################
430 vkernel_enable="NO" # Set to YES to enable starting of vkernels
431 vkernel_list="" # Space separated list of names of vkernels
432 #vkernel_bin="/boot/kernel.VKERNEL64" # Default path to the vkernel binary
433 #vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued
435 vknetd_enable="NO" # Bridged networking
436 vknetd_flags="-U" # Bridged networking flags
438 # Create an entry for each vkernel specified in vkernel_list
439 # replacing 'example' by the name of the vkernel.
441 #vkernel_example_bin="/boot/kernel.VKERNEL64"
442 # Path to the vkernel binary
443 #vkernel_example_memsize="64m"
444 # Amount of memory for the vkernel
445 #vkernel_example_rootimg_list="/var/vkernel/rootimg.01"
446 # Space separated list of disk images
447 #vkernel_example_memimg="/var/vkernel/memimg.000000"
448 # Optional: Memory image file for vkernel
449 #vkernel_example_iface_list="auto:bridge0"
450 # Optional: space separated list network interfaces for the vkernel
451 #vkernel_example_logfile="/dev/null"
452 # Optional: path to the console log file
453 #vkernel_example_user="root"
454 # Optional: user that will run the vkernel
455 #vkernel_example_flags="-U"
456 # Optional: aditional flags to start the vkernel with
457 #vkernel_example_kill_timeout="45"
458 # Optional: timeout before SIGKILL is issued when stopping the vkernel
460 ##############################################################
461 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
462 ### scripts to source rc_conf_files overrides safely. ##
463 ##############################################################
465 if [ -z "${source_rc_confs_defined}" ]; then
466 source_rc_confs_defined=yes
468 local i sourced_files
469 for i in ${rc_conf_files}; do
470 case ${sourced_files} in
474 sourced_files="${sourced_files}:$i:"
projects / dragonfly.git / blob