3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
18 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info="YES" # Enables display of informational messages at boot.
26 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
27 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
28 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
29 powerd_enable="NO" # Run powerd to adjust CPU speed.
30 powerd_flags="" # additional flags for powerd(8).
31 sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes.
32 sensorsd_flags="" # additional flags for sensorsd(8).
33 hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging.
34 hotplugd_flags="" # additional flags for hotplugd(8)
35 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
36 pccard_ether_delay="5" # Delay before trying to start DHCP client in pccard_ether
37 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
38 local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d"
39 # startup script dirs.
40 script_name_sep=" " # Change if your startup scripts' names contain spaces
41 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
42 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
43 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
44 extra_netfs_types="NO" # List of network extra filesystem types for delayed
45 # mount at startup (or NO).
46 devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf"
47 # Config files for devfs(5)
48 tmpfs_var_run="NO" # Set to YES to mount a tmpfs(5) at /var/run
49 tmpfs_tmp="NO" # Set to YES to mount a tmpfs(5) at /tmp
51 ##############################################################
52 ### Network configuration sub-section ######################
53 ##############################################################
55 ### Basic network and firewall/security options: ###
57 # see 'man firewall' for an explanation of the default firewall rules
59 hostname="" # Set this!
60 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
61 dhcp_client="dhclient" # Name of the rc script that is called to start
62 # the DHCP client, e.g., "dhcpcd" or "dhclient"
63 dhcpcd_enable="NO" # Set to YES to run dhcpcd in master mode.
64 dhcpcd_program="/sbin/dhcpcd"
66 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
67 dhclient_flags="-w" # Additional flags to pass to dhcp client.
68 firewall_enable="NO" # Set to YES to enable firewall functionality
69 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
70 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
71 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
72 firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
73 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
74 firewall_open_tcp_ports="22 25 53 80 113 443"
75 firewall_open_udp_ports="53"
76 firewall_quiet="NO" # Set to YES to suppress rule display
77 firewall_logging="NO" # Set to YES to enable events logging
78 firewall_flags="" # Flags passed to ipfw when type is a file
79 ipfw3_enable="NO" # Set to YES to enable ipfw3(8) firewall
80 ipfw3_program="/sbin/ipfw3" # where the ipfw3 program lives
81 ipfw3_script="/etc/ipfw3.rules" # Script to run to set up the firewall rules
82 ipfw3_modules="ipfw3 ipfw3_basic" # IPFW3 modules to be loaded
83 ip_portrange_first="NO" # Set first dynamically allocated port
84 ip_portrange_last="NO" # Set last dynamically allocated port
85 natd_program="/sbin/natd" # path to natd, if you want a different one.
86 natd_enable="NO" # Enable natd (if firewall_enable == YES).
87 natd_interface="" # Public interface or IPaddress to use.
88 natd_flags="" # Additional flags for natd.
89 pf_enable="NO" # Set to YES to enable packet filter (pf)
90 pf_rules="/etc/pf.conf" # rules definition file for pf
91 pf_program="/usr/sbin/pfctl" # where the pfctl program lives
92 pf_flags="" # additional flags for pfctl
93 pflog_enable="NO" # Set to YES to enable packet filter logging
94 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
95 pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
96 pflog_flags="" # additional flags for pflogd
97 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
98 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
99 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
100 # For the following option you need to have TCP_DROP_SYNFIN set in your
101 # kernel. Please refer to LINT64 details.
102 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
103 # NOTE: this violates the TCP specification
104 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
105 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
106 netif_enable="YES" # Set to NO to not configure network interfaces.
107 network_interfaces="auto" # List of network interfaces (or "auto").
108 cloned_interfaces="" # List of cloned network interfaces to create.
109 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config.
110 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
111 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
112 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
114 # If you have any sppp(4) interfaces above, you might also want to set
115 # the following parameters. Refer to spppcontrol(8) for their meaning.
116 sppp_interfaces="" # List of sppp interfaces.
117 #sppp_interfaces="...0" # example: sppp over ...
118 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
119 gif_interfaces="NO" # List of GIF tunnels (or "NO").
120 #gif_interfaces="gif0 gif1" # Examples typically for a router.
121 # Choose correct tunnel addrs.
122 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
123 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
125 # User ppp configuration.
126 ppp_enable="NO" # Start user-ppp (or NO).
127 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
128 # For details see man page for ppp(8). Default is auto.
129 ppp_nat="YES" # Use PPP's internal network address translation or NO.
130 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
131 ppp_user="root" # Which user to run ppp as
133 ### Network daemon (miscellaneous) ###
134 syslogd_enable="YES" # Run syslog daemon (or NO).
135 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
136 #syslogd_flags="-s" # Flags to syslogd (if enabled).
137 syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
138 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
139 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
140 inetd_flags="-wW" # Optional flags to inetd
142 rwhod_enable="NO" # Run the rwho daemon (or NO).
143 rwhod_flags="" # Flags for rwhod
144 rarpd_enable="NO" # Run rarpd (or NO).
145 rarpd_flags="" # Flags to rarpd.
146 bootparamd_enable="NO" # Run bootparamd (or NO).
147 bootparamd_flags="" # Flags to bootparamd
148 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
149 pppoed_provider="*" # Provider and ppp(8) config file entry.
150 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
151 pppoed_interface="fxp0" # The interface that pppoed runs on.
152 sshd_enable="NO" # Enable sshd
153 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
154 sshd_flags="" # Additional flags for sshd.
156 ftpd_enable="NO" # Run stand-alone ftp daemon (or NO).
157 ftpd_flags="" # Flags for ftpd, -D added implicitly.
159 wpa_supplicant_enable="NO" # Run wpa_supplicant.
160 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
161 wpa_supplicant_flags="-c /etc/wpa_supplicant.conf"
163 ### Network File System (NFS): ###
164 ### Server-side options also need rpcbind_enable="YES" ###
166 ### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
167 ### the mtime matches the data cache is left intact.
169 autofs_enable="NO" # Run automountd(8)
170 automount_flags="" # Flags to automount(8) (if autofs enabled).
171 automountd_flags="" # Flags to automountd(8) (if autofs enabled).
172 autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
173 nfs_client_enable="NO" # This host is an NFS client (or NO).
174 nfs_access_cache="5" # Client attribute cache timeout in seconds
175 #nfs_neg_cache="3" # Client attribute negative hit cache timeout
176 nfs_server_enable="NO" # This host is an NFS server (or NO).
177 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
178 mountd_enable="NO" # Run mountd (or NO).
179 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
180 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
181 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
182 nfs_bufpackets="" # bufspace (in packets) for client
183 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
184 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
185 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
186 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
187 rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
188 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
189 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
190 rpcbind_flags="" # Flags to rpcbind (if enabled).
191 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
192 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
193 keyserv_flags="" # Flags to keyserv (if enabled).
195 ### Network Time Services options: ###
196 dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO).
197 dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
198 dntpd_flags="" # Flags to dntpd (if enabled) also server name(s)
200 # Bluetooth deamons and options:
201 btconfig_enable="NO" # Configure Bluetooth devices (or NO).
202 btconfig_devices="" # List of Bluetooth devices (or empty for all).
203 #btconfig_<device>="" # Parameters to pass to <device>.
204 btconfig_args="" # Parameters to pass to all devices.
205 sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO).
206 sdpd_flags="" # Flags to sdpd (if enabled).
207 bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO).
208 bthcid_flags="" # Flags to bthcid (if enabled).
210 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
211 nis_client_enable="NO" # We're an NIS client (or NO).
212 nis_client_flags="" # Flags to ypbind (if enabled).
213 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
214 nis_ypset_flags="" # Flags to ypset (if enabled).
215 nis_server_enable="NO" # We're an NIS server (or NO).
216 nis_server_flags="" # Flags to ypserv (if enabled).
217 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
218 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
219 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
220 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
222 ### Network routing options: ###
223 defaultrouter="NO" # Set to default gateway (or NO).
224 static_routes="" # Set to static route list (or leave empty).
225 gateway_enable="NO" # Set to YES if this host will be a gateway.
226 router_enable="NO" # Set to YES to enable a routing daemon.
227 router_program="/sbin/routed" # Name of routing daemon to use if enabled.
228 router_flags="-q" # Flags for routing daemon.
229 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
230 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
231 accept_sourceroute="NO" # accept source routed packets to us
233 ### Miscellaneous network options: ###
234 icmp_bmcastecho="NO" # respond to broadcast ping packets
236 ### IPv6 options: ###
237 ipv6_enable="NO" # Set to YES to set up for IPv6.
238 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
239 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
240 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
241 ipv6_static_routes="" # Set to static route list (or leave empty).
242 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
243 # route toward loopback interface.
244 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
245 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
246 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
247 ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
248 ipv6_router_flags="" # Flags to IPv6 routing daemon.
249 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
251 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
252 # node, you should stop advertisement.
253 #ipv6_network_interfaces="ed0 ep0" # Examples for router
254 # or static configuration for end node.
255 # Choose correct prefix value.
256 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
257 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
258 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
259 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
260 ipv6_default_interface="NO" # Default output interface for scoped addrs.
261 # Now this works only for IPv6 link local
263 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
264 # advertisement daemon. If set to YES,
265 # this router becomes a possible candidate
266 # IPv6 default router for local subnets.
267 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
268 rtsold_enable="NO" # Set to YES to enable an IPv6 routing
269 # solicitation daemon. This is used for
270 # automatic discovery of non-link local
272 rtsold_flags="-a" # Do autoprobing of outgoing interface.
273 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
274 # tunneling interface. Specify this entry
275 # to enable 6to4 interface.
276 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
277 # to limit peer addr range. Effective value
279 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
280 # If you like, you can set "AUTO" for this.
281 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
282 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
284 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
285 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
286 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
287 ipv6_firewall_logging="NO" # Set to YES to enable events logging
288 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
289 ip6addrctl_enable="YES" # Set to YES to enable default address selection
290 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
291 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
292 # (ipv4_prefer, ipv6_prefer, or AUTO)
294 ##############################################################
295 ### System console options #################################
296 ##############################################################
298 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
299 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
300 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
301 keychange="NO" # function keys default values (or NO).
302 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
303 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
304 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
305 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
306 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
307 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
308 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
309 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
310 # specifically overridden in rc.conf(5).
311 moused_enable="NO" # Run the mouse daemon.
312 moused_type="auto" # See man page for rc.conf(5) for available settings.
313 moused_port="/dev/psm0" # Set to your mouse port.
314 moused_flags="" # Any additional flags to moused.
315 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
316 # language code table, specify alternative range
317 # start like mousechar_start=3, see vidcontrol(1)
318 vidhistory="" # Set video history buffer size
319 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
320 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
323 ##############################################################
324 ### Mail Transfer Agent (MTA) options ######################
325 ##############################################################
327 mta_start_script="/etc/rc.sendmail"
328 # Script to start your chosen MTA, called by /etc/rc.
329 # Settings for /etc/rc.sendmail:
330 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
331 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
332 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
333 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
334 # Flags for localhost-only MTA
335 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
336 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
337 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
338 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
339 # Flags for sendmail_msp_queue daemon.
340 sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO).
343 ##############################################################
344 ### Miscellaneous administrative options ###################
345 ##############################################################
347 mixer_enable="YES" # Manage mixer settings across reboots
348 cron_enable="YES" # Run the periodic job daemon.
349 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
350 cron_flags="" # Which options to pass to the cron daemon.
351 lpd_enable="NO" # Run the line printer daemon.
352 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
353 lpd_flags="" # Flags to lpd (if enabled).
354 nscd_enable="NO" # Run the nsswitch caching daemon.
355 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
356 devd_flags="" # Additional flags for devd(8).
357 dumpdev="NO" # Device name to crashdump to (or NO).
358 dumpdir="/var/crash" # Directory where crash dumps are to be stored
359 savecore_flags="" # Used if dumpdev is enabled above, and present.
360 crashinfo_enable="YES" # Automatically generate crash dump summary.
361 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
362 enable_quotas="NO" # turn on quotas on startup (or NO).
363 check_quotas="YES" # Check quotas on startup (or NO).
364 accounting_enable="NO" # Turn on process accounting (or NO).
365 sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO).
366 clear_tmp_enable="NO" # Clear /tmp at startup.
367 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
368 ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib"
369 # shared library search paths
370 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
371 # Local directories with ldconfig configuration files.
372 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
373 update_motd="YES" # update version info in /etc/motd (or NO)
374 start_vinum="NO" # set to YES to start vinum
375 udevd_enable="NO" # Run udevd(8) daemon.
376 udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm).
377 lvm_enable="NO" # Run LVM volume discovery.
378 entropy_dir="/var/db/entropy" # Set to NO to disable
379 entropy_file="/var/db/entropy/reboot" # Set to NO to disable
380 entropy_save_sz="16384" # Size of the entropy cache files (in bytes)
381 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
382 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
383 newsyslog_enable="NO" # Run newsyslog at startup.
384 newsyslog_flags="" # Flags to newsyslog (if enabled).
385 resident_enable="NO" # Process /etc/resident.conf
386 varsym_enable="NO" # Process /etc/varsym.conf
387 watchdogd_enable="NO" # Start the software watchdog daemon
389 ##############################################################
390 ### Jail Configuration #######################################
391 ##############################################################
393 jail_enable="NO" # Set to NO to disable starting of any jails
394 jail_list="" # Space separated list of names of jails
395 jail_default_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
396 jail_default_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
397 jail_default_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
398 jail_default_chflags_allow="NO" # Allow altering system files within a jail
399 jail_default_raw_sockets_allow="NO" # Allow raw sockets within a jail
402 # To use rc's built-in jail infrastructure create entries for
403 # each jail, specified in jail_list, with the following variables.
405 # - replace 'example' with the jail's name.
406 # - except rootdir, hostname and ip, all of the following variables may be made
407 # global jail variables if you don't specify a jail name (ie. jail_interface).
409 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
410 #jail_example_hostname="default.domain.com" # Jail's hostname
411 #jail_example_ip="192.168.0.10" # Jail's IP number
412 #jail_example_interface="" # Interface to create the IP alias on
413 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
414 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
415 #jail_example_procfs_enable="NO" # mount procfs in jail
416 #jail_example_devfs_enable="NO" # mount devfs in jail
417 #jail_example_mount_enable="NO" # mount/umount jail's fs
418 #jail_example_fstab="" # fstab(5) for mount/umount
419 #jail_example_flags="-l -U root" # flags for jail(8)
421 ##############################################################
422 ### VFS quota options #######################################
423 ##############################################################
425 vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options
426 vfs_quota_sync="" # Space separated list of mount points or "NO"
428 ##############################################################
429 ### VKernel options #########################################
430 ##############################################################
432 vkernel_enable="NO" # Set to YES to enable starting of vkernels
433 vkernel_list="" # Space separated list of names of vkernels
434 #vkernel_bin="/boot/kernel.VKERNEL64" # Default path to the vkernel binary
435 #vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued
437 vknetd_enable="NO" # Bridged networking
438 vknetd_flags="-U" # Bridged networking flags
440 # Create an entry for each vkernel specified in vkernel_list
441 # replacing 'example' by the name of the vkernel.
443 #vkernel_example_bin="/boot/kernel.VKERNEL64"
444 # Path to the vkernel binary
445 #vkernel_example_memsize="64m"
446 # Amount of memory for the vkernel
447 #vkernel_example_rootimg_list="/var/vkernel/rootimg.01"
448 # Space separated list of disk images
449 #vkernel_example_memimg="/var/vkernel/memimg.000000"
450 # Optional: Memory image file for vkernel
451 #vkernel_example_iface_list="auto:bridge0"
452 # Optional: space separated list network interfaces for the vkernel
453 #vkernel_example_logfile="/dev/null"
454 # Optional: path to the console log file
455 #vkernel_example_user="root"
456 # Optional: user that will run the vkernel
457 #vkernel_example_flags="-U"
458 # Optional: aditional flags to start the vkernel with
459 #vkernel_example_kill_timeout="45"
460 # Optional: timeout before SIGKILL is issued when stopping the vkernel
462 ##############################################################
463 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
464 ### scripts to source rc_conf_files overrides safely. ##
465 ##############################################################
467 if [ -z "${source_rc_confs_defined}" ]; then
468 source_rc_confs_defined=yes
470 local i sourced_files
471 for i in ${rc_conf_files}; do
472 case ${sourced_files} in
476 sourced_files="${sourced_files}:$i:"