sys/dev/raid/aac/aac_cam.c

   1 /*
   2  * Copyright (c) 2002 Adaptec, Inc.
   3  * All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  * 1. Redistributions of source code must retain the above copyright
   9  *    notice, this list of conditions and the following disclaimer.
  10  * 2. Redistributions in binary form must reproduce the above copyright
  11  *    notice, this list of conditions and the following disclaimer in the
  12  *    documentation and/or other materials provided with the distribution.
  13  *
  14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  24  * SUCH DAMAGE.
  25  *
  26  *      $FreeBSD: src/sys/dev/aac/aac_cam.c,v 1.2.2.4 2003/04/08 13:22:08 scottl Exp $
  27  *      $DragonFly: src/sys/dev/raid/aac/aac_cam.c,v 1.4 2004/03/15 03:05:03 dillon Exp $
  28  */
  29
  30 /*
  31  * CAM front-end for communicating with non-DASD devices
  32  */
  33
  34 #include "opt_aac.h"
  35
  36 #include <sys/param.h>
  37 #include <sys/systm.h>
  38 #include <sys/kernel.h>
  39 #include <sys/sysctl.h>
  40 #include <sys/malloc.h>
  41
  42 #include <bus/cam/cam.h>
  43 #include <bus/cam/cam_ccb.h>
  44 #include <bus/cam/cam_debug.h>
  45 #include <bus/cam/cam_sim.h>
  46 #include <bus/cam/cam_xpt_sim.h>
  47 #include <bus/cam/scsi/scsi_all.h>
  48 #include <bus/cam/scsi/scsi_message.h>
  49
  50 #include "aac_compat.h"
  51 #include <sys/bus.h>
  52 #include <sys/conf.h>
  53 #include <sys/devicestat.h>
  54 #include <sys/disk.h>
  55
  56 #include <machine/md_var.h>
  57 #include <machine/bus.h>
  58 #include <sys/rman.h>
  59
  60 #include <vm/vm.h>
  61 #include <vm/pmap.h>
  62
  63 #include "aacreg.h"
  64 #include "aac_ioctl.h"
  65 #include "aacvar.h"
  66 #include "aac_cam.h"
  67
  68 struct aac_cam {
  69         device_t                dev;
  70         struct aac_cam_inf      *inf;
  71         struct cam_sim          *sim;
  72         struct cam_path         *path;
  73 };
  74
  75 static int aac_cam_probe(device_t dev);
  76 static int aac_cam_attach(device_t dev);
  77 static int aac_cam_detach(device_t dev);
  78 static void aac_cam_action(struct cam_sim *, union ccb *);
  79 static void aac_cam_poll(struct cam_sim *);
  80 static void aac_cam_complete(struct aac_command *);
  81 static u_int32_t aac_cam_reset_bus(struct cam_sim *, union ccb *);
  82 static u_int32_t aac_cam_abort_ccb(struct cam_sim *, union ccb *);
  83 static u_int32_t aac_cam_term_io(struct cam_sim *, union ccb *);
  84 static int aac_cam_get_tran_settings(struct aac_softc *, struct ccb_trans_settings *, u_int32_t);
  85
  86 static devclass_t       aac_pass_devclass;
  87
  88 static device_method_t  aac_pass_methods[] = {
  89         DEVMETHOD(device_probe,         aac_cam_probe),
  90         DEVMETHOD(device_attach,        aac_cam_attach),
  91         DEVMETHOD(device_detach,        aac_cam_detach),
  92         { 0, 0 }
  93 };
  94
  95 static driver_t aac_pass_driver = {
  96         "aacp",
  97         aac_pass_methods,
  98         sizeof(struct aac_cam)
  99 };
 100
 101 DRIVER_MODULE(aacp, aac, aac_pass_driver, aac_pass_devclass, 0, 0);
 102 MODULE_DEPEND(aacp, cam, 1, 1, 1);
 103
 104 MALLOC_DEFINE(M_AACCAM, "aaccam", "AAC CAM info");
 105
 106 static int
 107 aac_cam_probe(device_t dev)
 108 {
 109
 110         debug_called(2);
 111
 112         return (0);
 113 }
 114
 115 static int
 116 aac_cam_detach(device_t dev)
 117 {
 118
 119         return (0);
 120 }
 121
 122 /*
 123  * Register the driver as a CAM SIM
 124  */
 125 static int
 126 aac_cam_attach(device_t dev)
 127 {
 128         struct cam_devq *devq;
 129         struct cam_sim *sim;
 130         struct cam_path *path;
 131         struct aac_cam *camsc;
 132         struct aac_cam_inf *inf;
 133
 134         debug_called(1);
 135
 136         camsc = (struct aac_cam *)device_get_softc(dev);
 137         inf = (struct aac_cam_inf *)device_get_ivars(dev);
 138         camsc->inf = inf;
 139
 140         devq = cam_simq_alloc(inf->TargetsPerBus);
 141         if (devq == NULL)
 142                 return (EIO);
 143
 144         sim = cam_sim_alloc(aac_cam_action, aac_cam_poll, "aacp", camsc,
 145             device_get_unit(dev), 1, 1, devq);
 146         cam_simq_release(devq);
 147         if (sim == NULL) {
 148                 return (EIO);
 149         }
 150
 151         /* Since every bus has it's own sim, every bus 'appears' as bus 0 */
 152         if (xpt_bus_register(sim, 0) != CAM_SUCCESS) {
 153                 cam_sim_free(sim);
 154                 return (EIO);
 155         }
 156
 157         if (xpt_create_path(&path, NULL, cam_sim_path(sim),
 158             CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
 159                 xpt_bus_deregister(cam_sim_path(sim));
 160                 cam_sim_free(sim);
 161                 return (EIO);
 162         }
 163
 164         camsc->sim = sim;
 165         camsc->path = path;
 166
 167         return (0);
 168 }
 169
 170 static void
 171 aac_cam_action(struct cam_sim *sim, union ccb *ccb)
 172 {
 173         struct  aac_cam *camsc;
 174         struct  aac_softc *sc;
 175         struct  aac_srb32 *srb;
 176         struct  aac_fib *fib;
 177         struct  aac_command *cm;
 178
 179         debug_called(2);
 180
 181         camsc = (struct aac_cam *)cam_sim_softc(sim);
 182         sc = camsc->inf->aac_sc;
 183
 184         /* Synchronous ops, and ops that don't require communication with the
 185          * controller */
 186         switch(ccb->ccb_h.func_code) {
 187         case XPT_SCSI_IO:
 188         case XPT_RESET_DEV:
 189                 /* These are handled down below */
 190                 break;
 191         case XPT_CALC_GEOMETRY:
 192         {
 193                 struct ccb_calc_geometry *ccg;
 194                 u_int32_t size_mb;
 195                 u_int32_t secs_per_cylinder;
 196
 197                 ccg = &ccb->ccg;
 198                 size_mb = ccg->volume_size /
 199                     ((1024L * 1024L) / ccg->block_size);
 200                 if (size_mb >= (2 * 1024)) {            /* 2GB */
 201                         ccg->heads = 255;
 202                         ccg->secs_per_track = 63;
 203                 } else if (size_mb >= (1 * 1024)) {     /* 1GB */
 204                         ccg->heads = 128;
 205                         ccg->secs_per_track = 32;
 206                 } else {
 207                         ccg->heads = 64;
 208                         ccg->secs_per_track = 32;
 209                 }
 210                 secs_per_cylinder = ccg->heads * ccg->secs_per_track;
 211                 ccg->cylinders = ccg->volume_size / secs_per_cylinder;
 212
 213                 ccb->ccb_h.status = CAM_REQ_CMP;
 214                 xpt_done(ccb);
 215                 return;
 216         }
 217         case XPT_PATH_INQ:
 218         {
 219                 struct ccb_pathinq *cpi = &ccb->cpi;
 220
 221                 cpi->version_num = 1;
 222                 cpi->hba_inquiry = PI_WIDE_16;
 223                 cpi->target_sprt = 0;
 224                 cpi->hba_misc = PIM_NOBUSRESET;
 225                 cpi->hba_eng_cnt = 0;
 226                 cpi->max_target = camsc->inf->TargetsPerBus;
 227                 cpi->max_lun = 8;       /* Per the controller spec */
 228                 cpi->initiator_id = camsc->inf->InitiatorBusId;
 229                 cpi->bus_id = camsc->inf->BusNumber;
 230                 cpi->base_transfer_speed = 3300;
 231                 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
 232                 strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN);
 233                 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
 234                 cpi->unit_number = cam_sim_unit(sim);
 235
 236                 ccb->ccb_h.status = CAM_REQ_CMP;
 237                 xpt_done(ccb);
 238                 return;
 239         }
 240         case XPT_GET_TRAN_SETTINGS:
 241         {
 242                 u_int32_t handle;
 243
 244                 handle = AAC_BTL_TO_HANDLE(camsc->inf->BusNumber,
 245                     ccb->ccb_h.target_id, ccb->ccb_h.target_lun);
 246                 ccb->ccb_h.status = aac_cam_get_tran_settings(sc, &ccb->cts,
 247                     handle);
 248                 xpt_done(ccb);
 249                 return;
 250         }
 251         case XPT_SET_TRAN_SETTINGS:
 252                 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
 253                 xpt_done(ccb);
 254                 return;
 255         case XPT_RESET_BUS:
 256                 if (!(sc->flags & AAC_FLAGS_CAM_NORESET)) {
 257                         ccb->ccb_h.status = aac_cam_reset_bus(sim, ccb);
 258                 } else {
 259                         ccb->ccb_h.status = CAM_REQ_CMP;
 260                 }
 261                 xpt_done(ccb);
 262                 return;
 263         case XPT_ABORT:
 264                 ccb->ccb_h.status = aac_cam_abort_ccb(sim, ccb);
 265                 xpt_done(ccb);
 266                 return;
 267         case XPT_TERM_IO:
 268                 ccb->ccb_h.status = aac_cam_term_io(sim, ccb);
 269                 xpt_done(ccb);
 270                 return;
 271         default:
 272                 device_printf(sc->aac_dev, "Unsupported command 0x%x\n",
 273                     ccb->ccb_h.func_code);
 274                 ccb->ccb_h.status = CAM_PROVIDE_FAIL;
 275                 xpt_done(ccb);
 276                 return;
 277         }
 278
 279         /* Async ops that require communcation with the controller */
 280
 281         if (aac_alloc_command(sc, &cm)) {
 282                 xpt_freeze_simq(sim, 1);
 283                 ccb->ccb_h.status = CAM_REQUEUE_REQ;
 284                 xpt_done(ccb);
 285                 return;
 286         }
 287
 288         fib = cm->cm_fib;
 289         srb = (struct aac_srb32 *)&fib->data[0];
 290         cm->cm_datalen = 0;
 291
 292         switch (ccb->ccb_h.flags & CAM_DIR_MASK) {
 293         case CAM_DIR_IN:
 294                 srb->flags = AAC_SRB_FLAGS_DATA_IN;
 295                 cm->cm_flags |= AAC_CMD_DATAIN;
 296                 break;
 297         case CAM_DIR_OUT:
 298                 srb->flags = AAC_SRB_FLAGS_DATA_OUT;
 299                 cm->cm_flags |= AAC_CMD_DATAOUT;
 300                 break;
 301         case CAM_DIR_NONE:
 302                 srb->flags = AAC_SRB_FLAGS_NO_DATA_XFER;
 303                 break;
 304         default:
 305                 srb->flags = AAC_SRB_FLAGS_UNSPECIFIED_DIRECTION;
 306                 cm->cm_flags |= AAC_CMD_DATAIN | AAC_CMD_DATAOUT;
 307                 break;
 308         }
 309
 310         switch(ccb->ccb_h.func_code) {
 311         case XPT_SCSI_IO:
 312         {
 313                 struct ccb_scsiio *csio = &ccb->csio;
 314
 315                 srb->function = AAC_SRB_FUNC_EXECUTE_SCSI;
 316
 317                 /*
 318                  * Copy the CDB into the SRB.  It's only 6-16 bytes,
 319                  * so a copy is not too expensive.
 320                  */
 321                 srb->cdb_len = csio->cdb_len;
 322                 if (ccb->ccb_h.flags & CAM_CDB_POINTER)
 323                         bcopy(csio->cdb_io.cdb_ptr, (u_int8_t *)&srb->cdb[0],
 324                             srb->cdb_len);
 325                 else
 326                         bcopy(csio->cdb_io.cdb_bytes, (u_int8_t *)&srb->cdb[0],
 327                             srb->cdb_len);
 328
 329                 /* Map the s/g list. XXX 32bit addresses only! */
 330                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
 331                         if ((ccb->ccb_h.flags & CAM_SCATTER_VALID) == 0) {
 332                                 srb->data_len = csio->dxfer_len;
 333                                 if (ccb->ccb_h.flags & CAM_DATA_PHYS) {
 334                                         srb->sg_map32.SgCount = 1;
 335                                         srb->sg_map32.SgEntry[0].SgAddress =
 336                                             (u_int32_t)csio->data_ptr;
 337                                         srb->sg_map32.SgEntry[0].SgByteCount =
 338                                             csio->dxfer_len;
 339                                 } else {
 340                                         /*
 341                                          * Arrange things so that the S/G
 342                                          * map will get set up automagically
 343                                          */
 344                                         cm->cm_data = (void *)csio->data_ptr;
 345                                         cm->cm_datalen = csio->dxfer_len;
 346                                         cm->cm_sgtable = &srb->sg_map32;
 347                                 }
 348                         } else {
 349                                 /* XXX Need to handle multiple s/g elements */
 350                                 panic("aac_cam: multiple s/g elements");
 351                         }
 352                 } else {
 353                         srb->sg_map32.SgCount = 0;
 354                         srb->sg_map32.SgEntry[0].SgByteCount = 0;
 355                         srb->data_len = 0;
 356                 }
 357
 358                 break;
 359         }
 360         case XPT_RESET_DEV:
 361                 if (!(sc->flags & AAC_FLAGS_CAM_NORESET)) {
 362                         srb->function = AAC_SRB_FUNC_RESET_DEVICE;
 363                         break;
 364                 } else {
 365                         ccb->ccb_h.status = CAM_REQ_CMP;
 366                         xpt_done(ccb);
 367                         return;
 368                 }
 369         default:
 370                 break;
 371         }
 372
 373         srb->bus = camsc->inf->BusNumber; /* Bus number relative to the card */
 374         srb->target = ccb->ccb_h.target_id;
 375         srb->lun = ccb->ccb_h.target_lun;
 376         srb->timeout = ccb->ccb_h.timeout;      /* XXX */
 377         srb->retry_limit = 0;
 378
 379         cm->cm_complete = aac_cam_complete;
 380         cm->cm_private = ccb;
 381         cm->cm_timestamp = time_second;
 382         cm->cm_queue = AAC_ADAP_NORM_CMD_QUEUE;
 383
 384         fib->Header.XferState =
 385             AAC_FIBSTATE_HOSTOWNED      |
 386             AAC_FIBSTATE_INITIALISED    |
 387             AAC_FIBSTATE_FROMHOST       |
 388             AAC_FIBSTATE_REXPECTED      |
 389             AAC_FIBSTATE_NORM;
 390         fib->Header.Command = ScsiPortCommand;
 391         fib->Header.Size = sizeof(struct aac_fib_header) +
 392             sizeof(struct aac_srb32);
 393
 394         aac_enqueue_ready(cm);
 395         aac_startio(cm->cm_sc);
 396
 397         return;
 398 }
 399
 400 static void
 401 aac_cam_poll(struct cam_sim *sim)
 402 {
 403         /*
 404          * Pinging the interrupt routine isn't very safe, nor is it
 405          * really necessary.  Do nothing.
 406          */
 407 }
 408
 409 static void
 410 aac_cam_complete(struct aac_command *cm)
 411 {
 412         union   ccb *ccb;
 413         struct  aac_srb_response *srbr;
 414         struct  aac_softc *sc;
 415
 416         debug_called(2);
 417
 418         sc = cm->cm_sc;
 419         ccb = cm->cm_private;
 420         srbr = (struct aac_srb_response *)&cm->cm_fib->data[0];
 421
 422         if (srbr->fib_status != 0) {
 423                 device_printf(sc->aac_dev, "Passthru FIB failed!\n");
 424                 ccb->ccb_h.status = CAM_REQ_ABORTED;
 425         } else {
 426                 /*
 427                  * The SRB error codes just happen to match the CAM error
 428                  * codes.  How convienient!
 429                  */
 430                 ccb->ccb_h.status = srbr->srb_status;
 431
 432                 /* Take care of SCSI_IO ops. */
 433                 if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
 434                         u_int8_t command, device;
 435
 436                         ccb->csio.scsi_status = srbr->scsi_status;
 437
 438                         /* Take care of autosense */
 439                         if (srbr->sense_len) {
 440                                 int sense_len, scsi_sense_len;
 441
 442                                 scsi_sense_len = sizeof(struct scsi_sense_data);
 443                                 bzero(&ccb->csio.sense_data, scsi_sense_len);
 444                                 sense_len = (srbr->sense_len >
 445                                     scsi_sense_len) ? scsi_sense_len :
 446                                     srbr->sense_len;
 447                                 bcopy(&srbr->sense[0], &ccb->csio.sense_data,
 448                                     srbr->sense_len);
 449                                 ccb->csio.sense_len = sense_len;
 450                                 ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
 451                                 scsi_sense_print(&ccb->csio);
 452                         }
 453
 454                         /* If this is an inquiry command, fake things out */
 455                         if (ccb->ccb_h.flags & CAM_CDB_POINTER)
 456                                 command = ccb->csio.cdb_io.cdb_ptr[0];
 457                         else
 458                                 command = ccb->csio.cdb_io.cdb_bytes[0];
 459
 460                         if ((command == INQUIRY) &&
 461                             (ccb->ccb_h.status == CAM_REQ_CMP)) {
 462                                 device = ccb->csio.data_ptr[0] & 0x1f;
 463                                 /*
 464                                  * We want DASD and PROC devices to only be
 465                                  * visible through the pass device.
 466                                  */
 467                                 if ((device == T_DIRECT) ||
 468                                     (device == T_PROCESSOR) ||
 469                                     (sc->flags & AAC_FLAGS_CAM_PASSONLY))
 470                                         ccb->csio.data_ptr[0] =
 471                                             ((device & 0xe0) | T_NODEVICE);
 472                         }
 473                 }
 474         }
 475
 476         aac_release_command(cm);
 477
 478         xpt_done(ccb);
 479
 480         return;
 481 }
 482
 483 static u_int32_t
 484 aac_cam_reset_bus(struct cam_sim *sim, union ccb *ccb)
 485 {
 486         struct aac_fib *fib;
 487         struct aac_softc *sc;
 488         struct aac_cam *camsc;
 489         struct aac_vmioctl *vmi;
 490         struct aac_resetbus *rbc;
 491         int e;
 492
 493         camsc = (struct aac_cam *)cam_sim_softc(sim);
 494         sc = camsc->inf->aac_sc;
 495
 496         if (sc == NULL) {
 497                 printf("Null sc?\n");
 498                 return (CAM_REQ_ABORTED);
 499         }
 500
 501         aac_alloc_sync_fib(sc, &fib, 0);
 502
 503         vmi = (struct aac_vmioctl *)&fib->data[0];
 504         bzero(vmi, sizeof(struct aac_vmioctl));
 505
 506         vmi->Command = VM_Ioctl;
 507         vmi->ObjType = FT_DRIVE;
 508         vmi->MethId = sc->scsi_method_id;
 509         vmi->ObjId = 0;
 510         vmi->IoctlCmd = ResetBus;
 511
 512         rbc = (struct aac_resetbus *)&vmi->IoctlBuf[0];
 513         rbc->BusNumber = camsc->inf->BusNumber;
 514
 515         e = aac_sync_fib(sc, ContainerCommand, 0, fib,
 516             sizeof(struct aac_vmioctl));
 517         if (e) {
 518                 device_printf(sc->aac_dev, "Error 0x%x sending passthrough\n",
 519                     e);
 520                 aac_release_sync_fib(sc);
 521                 return (CAM_REQ_ABORTED);
 522         }
 523
 524         aac_release_sync_fib(sc);
 525         return (CAM_REQ_CMP);
 526 }
 527
 528 static u_int32_t
 529 aac_cam_abort_ccb(struct cam_sim *sim, union ccb *ccb)
 530 {
 531         return (CAM_UA_ABORT);
 532 }
 533
 534 static u_int32_t
 535 aac_cam_term_io(struct cam_sim *sim, union ccb *ccb)
 536 {
 537         return (CAM_UA_TERMIO);
 538 }
 539
 540 static int
 541 aac_cam_get_tran_settings(struct aac_softc *sc, struct ccb_trans_settings *cts, u_int32_t handle)
 542 {
 543         struct aac_fib *fib;
 544         struct aac_vmioctl *vmi;
 545         struct aac_vmi_devinfo_resp *vmi_resp;
 546         int error;
 547
 548         aac_alloc_sync_fib(sc, &fib, 0);
 549         vmi = (struct aac_vmioctl *)&fib->data[0];
 550         bzero(vmi, sizeof(struct aac_vmioctl));
 551
 552         vmi->Command = VM_Ioctl;
 553         vmi->ObjType = FT_DRIVE;
 554         vmi->MethId = sc->scsi_method_id;
 555         vmi->ObjId = handle;
 556         vmi->IoctlCmd = GetDeviceProbeInfo;
 557
 558         error = aac_sync_fib(sc, ContainerCommand, 0, fib,
 559             sizeof(struct aac_vmioctl));
 560         if (error) {
 561                 device_printf(sc->aac_dev, "Error %d sending VMIoctl command\n",
 562                     error);
 563                 aac_release_sync_fib(sc);
 564                 return (CAM_REQ_INVALID);
 565         }
 566
 567         vmi_resp = (struct aac_vmi_devinfo_resp *)&fib->data[0];
 568         if (vmi_resp->Status != ST_OK) {
 569                 debug(1, "VM_Ioctl returned %d\n", vmi_resp->Status);
 570                 aac_release_sync_fib(sc);
 571                 return (CAM_REQ_CMP_ERR);
 572         }
 573
 574         cts->bus_width = ((vmi_resp->Inquiry7 & 0x60) >> 5);
 575         if (vmi_resp->ScsiRate) {
 576                 cts->sync_period =
 577                     scsi_calc_syncparam((10000 / vmi_resp->ScsiRate));
 578                 cts->sync_offset = vmi_resp->ScsiOffset;
 579         } else {
 580                 cts->sync_period = 0;
 581                 cts->sync_offset = 0;
 582         }
 583         cts->flags &= ~(CCB_TRANS_DISC_ENB | CCB_TRANS_TAG_ENB);
 584         cts->valid = CCB_TRANS_DISC_VALID               |
 585                      CCB_TRANS_SYNC_RATE_VALID          |
 586                      CCB_TRANS_SYNC_OFFSET_VALID        |
 587                      CCB_TRANS_BUS_WIDTH_VALID          |
 588                      CCB_TRANS_TQ_VALID;
 589
 590         aac_release_sync_fib(sc);
 591         return (CAM_REQ_CMP);
 592 }