rename functions that clash with reserved math procedures to avoid gcc3.4
[dragonfly.git] / Makefile.inc1
1 #
2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
3 # $DragonFly: src/Makefile.inc1,v 1.35 2004/06/26 02:56:47 drhodus Exp $
4 #
5 # Make command line options:
6 #       -DMAKE_KERBEROS5 to build Kerberos5
7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8 #       -DNOCLEAN do not clean at all
9 #       -DNOCRYPT will prevent building of crypt versions
10 #       -DNOMAN do not build the manual pages
11 #       -DNOPROFILE do not build profiled libraries
12 #       -DNOGAMES do not go into games subdir
13 #       -DNOSHARE do not go into share subdir
14 #       -DNOINFO do not make or install info files
15 #       -DNOLIBC_R do not build libc_r.
16 #       -DNO_FORTRAN do not build g77 and related libraries.
17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
24 #
25 # The intended user-driven targets are:
26 #
27 # buildworld  - rebuild *everything*, including glue to help do upgrades
28 # quickworld  - skip the glue and do a depend+build on the meat
29 # realquickworld - skip the glue and depend stages and just build the meat
30 # crossworld  - only build the glue (particularly the cross-build environment)
31 # installworld- install everything built by "buildworld"
32 # update      - convenient way to update your source tree (eg: sup/cvs)
33 # most        - build user commands, no libraries or include files
34 # installmost - install user commands, no libraries or include files
35 #
36 # Standard targets (not defined here) are documented in the makefiles in
37 # /usr/share/mk.  These include:
38 #               obj depend all install clean cleandepend cleanobj
39
40 # Put initial settings here.
41 SUBDIR=
42
43 # We must do share/info early so that installation of info `dir'
44 # entries works correctly.  Do it first since it is less likely to
45 # grow dependencies on include and lib than vice versa.
46 .if exists(${.CURDIR}/share/info)
47 SUBDIR+= share/info
48 .endif
49
50 # We must do include and lib early so that the perl *.ph generation
51 # works correctly as it uses the header files installed by this.
52 .if exists(${.CURDIR}/include)
53 SUBDIR+= include
54 .endif
55 .if exists(${.CURDIR}/lib)
56 SUBDIR+= lib
57 .endif
58 # This exists simply to ensure that the obj dir hierarchy is
59 # intact for nrelease, allowing the nrelease Makefile's to 
60 # reference ${.OBJDIR}.
61 #
62 .if exists(${.CURDIR}/nrelease)
63 SUBDIR+= nrelease
64 .endif
65
66 .if exists(${.CURDIR}/bin)
67 SUBDIR+= bin
68 .endif
69 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
70 SUBDIR+= games
71 .endif
72 .if exists(${.CURDIR}/gnu)
73 SUBDIR+= gnu
74 .endif
75 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
76     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
77 SUBDIR+= kerberos5
78 .endif
79 .if exists(${.CURDIR}/libexec)
80 SUBDIR+= libexec
81 .endif
82 .if exists(${.CURDIR}/sbin)
83 SUBDIR+= sbin
84 .endif
85 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
86 SUBDIR+= secure
87 .endif
88 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
89 SUBDIR+= share
90 .endif
91 .if exists(${.CURDIR}/sys)
92 SUBDIR+= sys
93 .endif
94 .if exists(${.CURDIR}/usr.bin)
95 SUBDIR+= usr.bin
96 .endif
97 .if exists(${.CURDIR}/usr.sbin)
98 SUBDIR+= usr.sbin
99 .endif
100
101 # etc must be last for "distribute" to work
102 .if exists(${.CURDIR}/etc)
103 SUBDIR+= etc
104 .endif
105
106 # These are last, since it is nice to at least get the base system
107 # rebuilt before you do them.
108 .if defined(LOCAL_DIRS)
109 .for _DIR in ${LOCAL_DIRS}
110 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
111 SUBDIR+= ${_DIR}
112 .endif
113 .endfor
114 .endif
115
116 .if defined(SUBDIR_OVERRIDE)
117 SUBDIR=         ${SUBDIR_OVERRIDE}
118 .endif
119
120 .if defined(NOCLEANDIR)
121 CLEANDIR=       clean cleandepend
122 .else
123 CLEANDIR=       cleandir
124 .endif
125
126 SUP?=           /usr/local/bin/cvsup
127 SUPFLAGS?=      -g -L 2 -P -
128 .if defined(SUPHOST)
129 SUPFLAGS+=      -h ${SUPHOST}
130 .endif
131
132 # Object directory base in primary make.  Note that when we rerun make
133 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
134 # subdirectory because the rest of the build system needs it that way.
135 # The original object directory base is saved in OBJTREE.
136 #
137 MAKEOBJDIRPREFIX?=      /usr/obj
138 OBJTREE?=               ${MAKEOBJDIRPREFIX}
139
140 # Used for stage installs and pathing
141 #
142 DESTDIRBASE?=           ${OBJTREE}${.CURDIR}
143
144 TARGET_ARCH?=   ${MACHINE_ARCH}
145 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
146 TARGET?=        ${MACHINE}
147 .else
148 TARGET?=        ${TARGET_ARCH}
149 .endif
150 .if make(buildworld)
151 BUILD_ARCH!=    sysctl -n hw.machine_arch
152 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
153 .error To cross-build, set TARGET_ARCH.
154 .endif
155 .endif
156
157 # BTOOLS        (Natively built) All non-cross-development tools that the
158 #               main build needs.  This includes things like 'mkdir' and 'rm'.
159 #               We will not use the native system's exec path once we start
160 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
161 #
162 # CTOOLS        (Natively built) Cross development tools which are specific
163 #               to the target architecture.
164 #
165 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
166 #               CTOOLS.
167 #
168 # MACHINE_ARCH  Architecture we are building on
169 # TARGET_ARCH   Architecture we are building for
170 #
171 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
172 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
173 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
174
175 # The strict temporary command path contains all binaries required
176 # by the buildworld system after the cross-tools stage.
177 #
178 STRICTTMPPATH=  ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
179
180 TMPDIR?=        /tmp
181 TMPPID!=        echo $$$$
182
183 #
184 # Building a world goes through the following stages
185 #
186 # 1. bootstrap-tool stage [BMAKE]
187 #       This stage is responsible for creating programs that
188 #       are needed for backward compatibility reasons. They
189 #       are not built as cross-tools.
190 # 2. build-tool stage [TMAKE]
191 #       This stage is responsible for creating the object
192 #       tree and building any tools that are needed during
193 #       the build process.
194 # 3. cross-tool stage [XMAKE]
195 #       This stage is responsible for creating any tools that
196 #       are needed for cross-builds. A cross-compiler is one
197 #       of them.
198 # 4. world stage [WMAKE]
199 #       This stage actually builds the world.
200 # 5. install stage (optional) [IMAKE]
201 #       This stage installs a previously built world.
202 #
203
204 # bootstrap-tool stage
205 #
206 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
207                 OBJTREE=${OBJTREE} \
208                 DESTDIR=${BTOOLSDEST} \
209                 INSTALL="sh ${.CURDIR}/tools/install.sh"
210
211 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
212                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
213                 -DNO_WERROR
214
215 # build-tool stage
216 #
217 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
218                 OBJTREE=${OBJTREE} \
219                 DESTDIR= \
220                 INSTALL="sh ${.CURDIR}/tools/install.sh"
221
222 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
223                 -DNO_FORTRAN
224
225 # cross-tool stage
226 #
227 # note: TOOLS_PREFIX points to the obj root holding the cross
228 #       compiler binaries, while USRDATA_PREFIX points to the obj root 
229 #       holding the target environment (and also determines where cross-built
230 #       libraries, crt*.o, and include files are installed).
231 #
232 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
233                 OBJTREE=${OBJTREE} \
234                 DESTDIR=${CTOOLSDEST} \
235                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
236                 TOOLS_PREFIX=${CTOOLSDEST} \
237                 USRDATA_PREFIX=${WORLDDEST}
238
239 XMAKE=          ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
240                 -DBOOTSTRAPPING
241
242 # world stage, note the strict path and note that TOOLS_PREFIX is left
243 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
244 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
245 # for both binary and library paths, even though it is being compiled to
246 # WORLDDEST.  None of the programs in the world stage are ever actually
247 # executed during the buildworld/installworld.
248 #
249 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
250                 OBJTREE=${OBJTREE} \
251                 MACHINE_ARCH=${TARGET_ARCH} \
252                 MACHINE=${TARGET} \
253                 OBJFORMAT_PATH=${CTOOLSDEST} \
254                 PERL5LIB=${WORLDDEST}/usr/libdata/perl/5.00503 \
255                 GROFF_BIN_PATH=${BTOOLSDEST}/usr/bin \
256                 GROFF_FONT_PATH=${BTOOLSDEST}/usr/share/groff_font \
257                 GROFF_TMAC_PATH=${BTOOLSDEST}/usr/share/tmac
258
259 WMAKEENV=       ${CROSSENV} \
260                 DESTDIR=${WORLDDEST} \
261                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
262                 PATH=${STRICTTMPPATH}
263
264 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
265
266 # install stage
267 #
268 IMAKEENV=       ${CROSSENV} \
269                 PATH=${STRICTTMPPATH}
270 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
271
272 # kernel stage
273 #
274 KMAKEENV=       ${WMAKEENV}
275
276 # buildworld
277 #
278 # Attempt to rebuild the entire system, with reasonable chance of
279 # success, regardless of how old your existing system is.
280 #
281 _worldtmp:
282         @echo
283         @echo "--------------------------------------------------------------"
284         @echo ">>> Rebuilding the temporary build tree"
285         @echo "--------------------------------------------------------------"
286 .if !defined(NOCLEAN)
287         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
288 .else
289         # XXX - These two can depend on any header file.
290         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
291         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
292 .endif
293         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
294 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
295         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
296                 -p ${_dir}/  > /dev/null
297         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
298                 -p ${_dir}/usr > /dev/null
299 .endfor
300         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
301                 -p ${WORLDDEST}/usr/include > /dev/null
302         ln -sf ${.CURDIR}/sys ${WORLDDEST}
303
304 _bootstrap-tools:
305         @echo
306         @echo "--------------------------------------------------------------"
307         @echo ">>> stage 1: bootstrap tools"
308         @echo "--------------------------------------------------------------"
309         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
310 _cleanobj:
311         @echo
312         @echo "--------------------------------------------------------------"
313         @echo ">>> stage 2a: cleaning up the object tree"
314         @echo "--------------------------------------------------------------"
315         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
316 _obj:
317         @echo
318         @echo "--------------------------------------------------------------"
319         @echo ">>> stage 2b: rebuilding the object tree"
320         @echo "--------------------------------------------------------------"
321         cd ${.CURDIR}; ${WMAKE} par-obj
322 _build-tools:
323         @echo
324         @echo "--------------------------------------------------------------"
325         @echo ">>> stage 2c: build tools"
326         @echo "--------------------------------------------------------------"
327         cd ${.CURDIR}; ${TMAKE} build-tools
328 _cross-tools:
329         @echo
330         @echo "--------------------------------------------------------------"
331         @echo ">>> stage 3: cross tools"
332         @echo "--------------------------------------------------------------"
333         cd ${.CURDIR}; ${XMAKE} cross-tools
334 _includes:
335         @echo
336         @echo "--------------------------------------------------------------"
337         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
338         @echo "--------------------------------------------------------------"
339         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
340 _libraries:
341         @echo
342         @echo "--------------------------------------------------------------"
343         @echo ">>> stage 4b: building libraries"
344         @echo "--------------------------------------------------------------"
345         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
346 _depend:
347         @echo
348         @echo "--------------------------------------------------------------"
349         @echo ">>> stage 4c: make dependencies"
350         @echo "--------------------------------------------------------------"
351         cd ${.CURDIR}; ${WMAKE} par-depend
352 everything:
353         @echo
354         @echo "--------------------------------------------------------------"
355         @echo ">>> stage 4d: building everything.."
356         @echo "--------------------------------------------------------------"
357         cd ${.CURDIR}; ${WMAKE} all
358
359 # note: buildworld no longer depends on _cleanobj because we rm -rf the
360 # entire object tree and built the bootstrap tools in a different location.
361 #
362 # buildworld    - build everything from scratch
363 # quickworld    - skip the bootstrap, build, and cross-build steps
364 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
365 #
366 # note: we include _obj in realquickworld to prevent accidental creation
367 # of files in /usr/src.
368
369 WMAKE_TGTS=
370 .if !defined(SUBDIR_OVERRIDE)
371 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
372 .endif
373 WMAKE_TGTS+=    _obj _build-tools
374 .if !defined(SUBDIR_OVERRIDE)
375 WMAKE_TGTS+=    _cross-tools
376 .endif
377 WMAKE_TGTS+=    _includes _libraries _depend everything
378
379 buildworld: ${WMAKE_TGTS}
380
381 quickworld: _obj _includes _libraries _depend everything
382
383 realquickworld: _obj _includes _libraries everything
384
385 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
386
387 .ORDER: ${WMAKE_TGTS}
388
389 #
390 # installcheck
391 #
392 # Checks to be sure system is ready for installworld
393 #
394 installcheck:
395 .if !defined(NO_SENDMAIL)
396         @if ! `id -u smmsp > /dev/null`; then \
397                 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
398                 false; \
399         fi
400         @if ! `id -g smmsp > /dev/null`; then \
401                 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
402                 false; \
403         fi
404 .endif
405
406 #
407 # distributeworld
408 #
409 # Distributes everything compiled by a `buildworld'.
410 #
411 # installworld
412 #
413 # Installs everything compiled by a 'buildworld'.
414 #
415 distributeworld installworld: installcheck
416         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
417
418 #
419 # reinstall
420 #
421 # If you have a build server, you can NFS mount the source and obj directories
422 # and do a 'make reinstall' on the *client* to install new binaries from the
423 # most recent server build.
424 #
425 reinstall:
426         @echo "--------------------------------------------------------------"
427         @echo ">>> Making hierarchy"
428         @echo "--------------------------------------------------------------"
429         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
430         @echo
431         @echo "--------------------------------------------------------------"
432         @echo ">>> Installing everything.."
433         @echo "--------------------------------------------------------------"
434         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
435 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
436         @echo
437         @echo "--------------------------------------------------------------"
438         @echo ">>> Rebuilding man page indices"
439         @echo "--------------------------------------------------------------"
440         cd ${.CURDIR}/share/man; ${MAKE} makedb
441 .endif
442
443 redistribute:
444         @echo "--------------------------------------------------------------"
445         @echo ">>> Distributing everything.."
446         @echo "--------------------------------------------------------------"
447         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
448
449 #
450 # buildkernel and installkernel
451 #
452 # Which kernels to build and/or install is specified by setting
453 # KERNCONF. If not defined a GENERIC kernel is built/installed.
454 # Only the existing (depending TARGET) config files are used
455 # for building kernels and only the first of these is designated
456 # as the one being installed.
457 #
458 # Note that we have to use TARGET instead of TARGET_ARCH when
459 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
460 # be set to cross-build, we have to make sure TARGET is set
461 # properly.
462
463 .if !defined(KERNCONF) && defined(KERNEL)
464 KERNCONF=       ${KERNEL}
465 KERNWARN=       yes
466 .else
467 KERNCONF?=      GENERIC
468 .endif
469 INSTKERNNAME?=  kernel
470
471 KRNLSRCDIR=     ${.CURDIR}/sys
472 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
473 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
474 KERNCONFDIR?=   ${KRNLCONFDIR}
475
476 BUILDKERNELS=
477 INSTALLKERNEL=
478 .for _kernel in ${KERNCONF}
479 .if exists(${KERNCONFDIR}/${_kernel})
480 BUILDKERNELS+=  ${_kernel}
481 .if empty(INSTALLKERNEL)
482 INSTALLKERNEL= ${_kernel}
483 .endif
484 .endif
485 .endfor
486
487 #
488 # buildkernel
489 #
490 # Builds all kernels defined by BUILDKERNELS.
491 #
492 check_buildworld_tools:
493         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
494             echo "You must buildworld before buildkernel.  If you wish"; \
495             echo "to build a kernel using native tools, config it manually"; \
496             echo "or use the nativekernel target if you are in a rush"; \
497             exit 1; \
498             fi
499
500 buildkernel:    check_buildworld_tools
501 .if empty(BUILDKERNELS)
502         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
503         @false
504 .endif
505 .if defined(KERNWARN)
506         @echo "--------------------------------------------------------------"
507         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
508         @echo "--------------------------------------------------------------"
509         @sleep 3
510 .endif
511         @echo
512 .for _kernel in ${BUILDKERNELS}
513         @echo "--------------------------------------------------------------"
514         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
515         @echo "--------------------------------------------------------------"
516         @echo "===> ${_kernel}"
517         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
518                 echo "REMOVING OLD NATIVEKERNEL BUILD"; \
519                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
520         mkdir -p ${KRNLOBJDIR}
521 .if !defined(NO_KERNELCONFIG)
522         cd ${KRNLCONFDIR}; \
523                 PATH=${STRICTTMPPATH} \
524                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
525                         ${KERNCONFDIR}/${_kernel}
526 .endif
527         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
528 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
529         cd ${KRNLOBJDIR}/${_kernel}; \
530             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
531 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
532         cd ${KRNLOBJDIR}/${_kernel}; \
533             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
534 .endif
535 .endif
536         cd ${KRNLOBJDIR}/${_kernel}; \
537             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
538             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
539 .if !defined(NO_KERNELDEPEND)
540         cd ${KRNLOBJDIR}/${_kernel}; \
541             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
542 .endif
543         cd ${KRNLOBJDIR}/${_kernel}; \
544             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
545         @echo "--------------------------------------------------------------"
546         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
547         @echo "--------------------------------------------------------------"
548 .endfor
549
550 # The nativekernel target is for when you are impatient and want to
551 # build a kernel without building the world first.
552 #
553 nativekernel:
554 .if empty(BUILDKERNELS)
555         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
556         @false
557 .endif
558 .if defined(KERNWARN)
559         @echo "--------------------------------------------------------------"
560         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
561         @echo "--------------------------------------------------------------"
562         @sleep 3
563 .endif
564         @echo
565 .for _kernel in ${BUILDKERNELS}
566         @echo "--------------------------------------------------------------"
567         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
568         @echo "--------------------------------------------------------------"
569         @echo "===> ${_kernel}"
570         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
571                 echo "REMOVING OLD BUILDKERNEL BUILD"; \
572                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
573         mkdir -p ${KRNLOBJDIR}
574 .if !defined(NO_KERNELCONFIG)
575         cd ${KRNLCONFDIR}; \
576                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
577                         ${KERNCONFDIR}/${_kernel}
578 .endif
579         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
580 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
581         cd ${KRNLOBJDIR}/${_kernel}; \
582             ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
583 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
584         cd ${KRNLOBJDIR}/${_kernel}; \
585             ${MAKE} KERNEL=${INSTKERNNAME} cleandir
586 .endif
587 .endif
588         cd ${KRNLOBJDIR}/${_kernel}; \
589             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
590             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
591 .if !defined(NO_KERNELDEPEND)
592         cd ${KRNLOBJDIR}/${_kernel}; \
593             ${MAKE} KERNEL=${INSTKERNNAME} depend
594 .endif
595         cd ${KRNLOBJDIR}/${_kernel}; \
596             ${MAKE} KERNEL=${INSTKERNNAME} all
597         @echo "--------------------------------------------------------------"
598         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
599         @echo "--------------------------------------------------------------"
600 .endfor
601
602 #
603 # installkernel
604 #
605 # Install the kernel defined by INSTALLKERNEL
606 #
607 installkernel reinstallkernel:
608         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
609             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
610
611 #
612 # update
613 #
614 # Update the source tree, by running sup and/or running cvs to update to the
615 # latest copy.
616 #
617 update:
618 .if defined(SUP_UPDATE)
619         @echo "--------------------------------------------------------------"
620         @echo ">>> Running ${SUP}"
621         @echo "--------------------------------------------------------------"
622 .if defined(SUPFILE)
623         @${SUP} ${SUPFLAGS} ${SUPFILE}
624 .endif
625 .if defined(SUPFILE1)
626         @${SUP} ${SUPFLAGS} ${SUPFILE1}
627 .endif
628 .if defined(SUPFILE2)
629         @${SUP} ${SUPFLAGS} ${SUPFILE2}
630 .endif
631 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
632         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
633 .endif
634 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
635         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
636 .endif
637 .endif
638 .if defined(CVS_UPDATE)
639         @echo "--------------------------------------------------------------"
640         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
641         @echo "--------------------------------------------------------------"
642         cd ${.CURDIR}; cvs -q update -rRELENG_4 -P -d
643 .endif
644
645 #
646 # most
647 #
648 # Build most of the user binaries on the existing system libs and includes.
649 #
650 most:
651         @echo "--------------------------------------------------------------"
652         @echo ">>> Building programs only"
653         @echo "--------------------------------------------------------------"
654 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
655         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
656 .endfor
657
658 #
659 # installmost
660 #
661 # Install the binaries built by the 'most' target.  This does not include
662 # libraries or include files.
663 #
664 installmost:
665         @echo "--------------------------------------------------------------"
666         @echo ">>> Installing programs only"
667         @echo "--------------------------------------------------------------"
668 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
669         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
670 .endfor
671
672 #
673 # ------------------------------------------------------------------------
674 #
675 # From here onwards are utility targets used by the 'make world' and
676 # related targets.  If your 'world' breaks, you may like to try to fix
677 # the problem and manually run the following targets to attempt to
678 # complete the build.  Beware, this is *not* guaranteed to work, you
679 # need to have a pretty good grip on the current state of the system
680 # to attempt to manually finish it.  If in doubt, 'make world' again.
681 #
682
683 # bootstrap-tools: Build all tools required to build all tools.
684 #
685 # [x]install:   dependancies on various new install features
686 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
687 #               envs are not compatible with older objformat binaries.
688 #
689 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
690 _strfile=       games/fortune/strfile
691 .endif
692
693 bootstrap-tools:
694 .for _tool in ${_strfile} \
695     bin/chmod bin/cp bin/dd bin/mkdir bin/rm bin/echo bin/test \
696     bin/cat bin/date bin/ln bin/mv bin/csh bin/expr bin/sh bin/ls \
697     bin/hostname bin/kill \
698     sbin/sysctl \
699     usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
700     usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/file \
701     usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
702     usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
703     usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
704     usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
705     usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
706     usr.bin/vi usr.bin/cap_mkdb usr.bin/vgrind usr.bin/true usr.bin/false \
707     usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
708     usr.sbin/chown usr.sbin/mtree usr.sbin/config \
709     usr.sbin/btxld usr.sbin/pwd_mkdb usr.sbin/zic usr.sbin/makewhatis \
710     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo \
711     gnu/usr.bin/grep gnu/usr.bin/sort gnu/usr.bin/patch \
712     gnu/usr.bin/gzip
713         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
714                 cd ${.CURDIR}/${_tool}; \
715                 ${MAKE} DIRPRFX=${_tool}/ obj; \
716                 ${MAKE} DIRPRFX=${_tool}/ depend; \
717                 ${MAKE} DIRPRFX=${_tool}/ all; \
718                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
719 .endfor
720         touch ${BTOOLSDEST}/.bootstrap_done
721
722 # build-tools: Build special purpose build tools.  gcc2 related tools are
723 # only built under the i386 architecture.  Other architectures are
724 # gcc3-only.
725 #
726 # XXX we may be able to remove or consolidate this into bootstrap-tools
727 # now that we have the native helper (.nx/.no) infrastructure.
728 #
729 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
730 _games= games/adventure games/hack games/phantasia
731 .endif
732
733 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
734 _share= share/syscons/scrnmaps
735 .endif
736
737 _gcc34_cross= gnu/usr.bin/cc34
738 _gcc34_tools= gnu/usr.bin/cc34/cc_prep gnu/usr.bin/cc34/cc_tools
739 .if ${MACHINE_ARCH} == "i386" && ${TARGET_ARCH} == "i386"
740 _gcc2_cross= gnu/usr.bin/cc
741 _gcc2_tools= gnu/usr.bin/cc/cc_tools
742 _binutils= gnu/usr.bin/binutils gnu/usr.bin/binutils214
743 .else
744 _binutils= gnu/usr.bin/binutils214
745 .endif
746
747 .if !defined(NO_FORTRAN)
748 .if ${TARGET_ARCH} == "i386"
749 _fortran= gnu/usr.bin/cc/f771
750 .else
751 _fortran= gnu/usr.bin/cc34/f771
752 .endif
753 .endif
754
755 .if !defined(NOPERL)
756 _perl=  gnu/usr.bin/perl/miniperl
757 .endif
758
759 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
760     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
761 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
762     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
763 .endif
764
765 .if defined(RELEASEDIR)
766 _sysinstall= release/sysinstall
767 .endif
768
769 build-tools:
770 .for _tool in ${_gcc2_tools} ${_gcc34_tools} \
771               ${_fortran} ${_perl} ${_libroken4} ${_libkrb5} \
772               ${_share} ${_sysinstall}
773         ${ECHODIR} "===> ${_tool} (build-tools)"; \
774                 cd ${.CURDIR}/${_tool}; \
775                 ${MAKE} DIRPRFX=${_tool}/ obj; \
776                 ${MAKE} DIRPRFX=${_tool}/ depend; \
777                 ${MAKE} DIRPRFX=${_tool}/ all; \
778                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
779 .endfor
780         touch ${BTOOLSDEST}/.build_done
781
782 #
783 # cross-tools: Build cross-building tools
784 #
785 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
786 _elf2exe=       usr.sbin/elf2exe
787 .endif
788
789 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
790 _btxld= usr.sbin/btxld
791 .endif
792
793 cross-tools:
794 .for _tool in ${_btxld} ${_elf2exe} ${_binutils} \
795               usr.bin/objformat usr.sbin/crunch/crunchide \
796               ${_gcc2_cross} ${_gcc34_cross}
797         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
798                 cd ${.CURDIR}/${_tool}; \
799                 ${MAKE} DIRPRFX=${_tool}/ obj; \
800                 ${MAKE} DIRPRFX=${_tool}/ depend; \
801                 ${MAKE} DIRPRFX=${_tool}/ all; \
802                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
803 .endfor
804         touch ${CTOOLSDEST}/.cross_done
805
806 #
807 # hierarchy - ensure that all the needed directories are present
808 #
809 hierarchy:
810         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
811
812 #
813 # libraries - build all libraries, and install them under ${DESTDIR}.
814 #
815 # The list of libraries with dependents (${_prebuild_libs}) and their
816 # interdependencies (__L) are built automatically by the
817 # ${.CURDIR}/tools/make_libdeps.sh script.
818 #
819 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
820 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
821 #
822 libraries:
823         cd ${.CURDIR}; \
824             HOST_CCVER=${HOST_CCVER} CCVER=gcc2 \
825                 ${MAKE} -f Makefile.inc1 _startup_libs2; \
826             HOST_CCVER=${HOST_CCVER} CCVER=gcc34 \
827                 ${MAKE} -f Makefile.inc1 _startup_libs34; \
828             ${MAKE} -f Makefile.inc1 _startup_libs; \
829             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
830             ${MAKE} -f Makefile.inc1 _generic_libs;
831         touch ${WORLDDEST}/.libraries_done
832
833 # These dependencies are not automatically generated:
834 #
835 # gnu/lib/libgcc and lib/csu must be built before all
836 # shared libraries for ELF.  The targets for _startup_libs{2,3} are
837 # specifically built using gcc{2,3}.
838 #
839 _startup_libs2= gnu/lib/gcc2/libgcc
840 _startup_libs34=        gnu/lib/gcc34/libgcc
841 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
842 _startup_libs=  lib/csu/${MACHINE_ARCH}-elf
843 .else
844 _startup_libs=  lib/csu/${MACHINE_ARCH}
845 .endif
846 _startup_libs+= lib/csu/common lib/libc
847
848 _prebuild_libs=
849
850 _generic_libs=  gnu/lib
851
852 .if !defined(NOPERL)
853 _generic_libs+= gnu/usr.bin/perl/libperl
854 .endif
855
856 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
857 _prebuild_libs+=        kerberos5/lib/libasn1
858 _prebuild_libs+=        kerberos5/lib/libgssapi
859 _prebuild_libs+=        kerberos5/lib/libkrb5
860 _prebuild_libs+=        kerberos5/lib/libroken
861 _generic_libs+= kerberos5/lib
862 .endif
863
864 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
865                 lib/libncurses lib/libopie lib/libradius lib/libskey \
866                 lib/libtacplus lib/libutil \
867                 lib/libz lib/msun
868
869 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
870 lib/libskey__L: lib/libcrypt__L lib/libmd__L
871
872 _generic_libs+= lib
873
874 .if !defined(NOCRYPT)
875 .if !defined(NO_OPENSSL)
876 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
877 .if !defined(NO_OPENSSH)
878 _prebuild_libs+=        secure/lib/libssh
879 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
880 .endif
881 .endif
882 _generic_libs+= secure/lib
883 .endif
884
885 _generic_libs+= usr.bin/lex/lib
886
887 .if ${MACHINE_ARCH} == "i386"
888 _generic_libs+= usr.sbin/pcvt/keycap
889 .endif
890
891 .for _lib in ${_startup_libs2} ${_startup_libs3} ${_startup_libs34} \
892                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
893 ${_lib}__L: .PHONY
894 .if exists(${.CURDIR}/${_lib})
895         ${ECHODIR} "===> ${_lib}"; \
896                 cd ${.CURDIR}/${_lib}; \
897                 ${MAKE} DIRPRFX=${_lib}/ depend; \
898                 ${MAKE} DIRPRFX=${_lib}/ all; \
899                 ${MAKE} DIRPRFX=${_lib}/ install
900 .endif
901 .endfor
902
903 # only mess with gcc2 for i386 architectures.
904 #
905 _startup_libs: ${_startup_libs:S/$/__L/}
906 .if ${TARGET_ARCH} == "i386"
907 _startup_libs2: ${_startup_libs2:S/$/__L/}
908 .else
909 _startup_libs2:
910 .endif
911 _startup_libs3: ${_startup_libs3:S/$/__L/}
912 _startup_libs34: ${_startup_libs34:S/$/__L/}
913 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
914 _generic_libs: ${_generic_libs:S/$/__L/}
915
916 # library targets must be ordered because there are inter-library
917 # races (e.g. generation of tconfig.h)
918 #
919 .ORDER: ${_startup_libs2:S/$/__L/}
920 .ORDER: ${_startup_libs3:S/$/__L/}
921 .ORDER: ${_startup_libs34:S/$/__L/}
922 .ORDER: ${_startup_libs:S/$/__L/}
923 .ORDER: ${_prebuild_libs:S/$/__L/}
924 .ORDER: ${_generic_libs:S/$/__L/}
925
926 .for __target in clean cleandepend cleandir obj depend includes
927 .for entry in ${SUBDIR}
928 ${entry}.${__target}__D: .PHONY
929         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
930                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
931                 edir=${entry}.${MACHINE_ARCH}; \
932                 cd ${.CURDIR}/$${edir}; \
933         else \
934                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
935                 edir=${entry}; \
936                 cd ${.CURDIR}/$${edir}; \
937         fi; \
938         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
939 .endfor
940 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
941 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
942 .endfor
943 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
944
945 # The wmake target is used by /usr/bin/wmake to run make in a
946 # world build environment.
947 #
948 wmake:
949         @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
950
951 wmakeenv:
952         @echo '${WMAKEENV} /bin/sh'
953
954 bmake:
955         @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
956
957 bmakeenv:
958         @echo '${BMAKEENV} /bin/sh'
959
960 tmake:
961         @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
962
963 tmakeenv:
964         @echo '${TMAKEENV} /bin/sh'
965
966 .include <bsd.subdir.mk>
967