sys/dev/drm/i915/intel_dvo.c

   1 /*
   2  * Copyright 2006 Dave Airlie <airlied@linux.ie>
   3  * Copyright © 2006-2007 Intel Corporation
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining a
   6  * copy of this software and associated documentation files (the "Software"),
   7  * to deal in the Software without restriction, including without limitation
   8  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   9  * and/or sell copies of the Software, and to permit persons to whom the
  10  * Software is furnished to do so, subject to the following conditions:
  11  *
  12  * The above copyright notice and this permission notice (including the next
  13  * paragraph) shall be included in all copies or substantial portions of the
  14  * Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  21  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  22  * DEALINGS IN THE SOFTWARE.
  23  *
  24  * Authors:
  25  *      Eric Anholt <eric@anholt.net>
  26  */
  27 #include <linux/i2c.h>
  28 #include <drm/drmP.h>
  29 #include <drm/drm_atomic_helper.h>
  30 #include <drm/drm_crtc.h>
  31 #include "intel_drv.h"
  32 #include <drm/i915_drm.h>
  33 #include "i915_drv.h"
  34 #include "dvo.h"
  35
  36 #define SIL164_ADDR     0x38
  37 #define CH7xxx_ADDR     0x76
  38 #define TFP410_ADDR     0x38
  39 #define NS2501_ADDR     0x38
  40
  41 static const struct intel_dvo_device intel_dvo_devices[] = {
  42         {
  43                 .type = INTEL_DVO_CHIP_TMDS,
  44                 .name = "sil164",
  45                 .dvo_reg = DVOC,
  46                 .slave_addr = SIL164_ADDR,
  47                 .dev_ops = &sil164_ops,
  48         },
  49         {
  50                 .type = INTEL_DVO_CHIP_TMDS,
  51                 .name = "ch7xxx",
  52                 .dvo_reg = DVOC,
  53                 .slave_addr = CH7xxx_ADDR,
  54                 .dev_ops = &ch7xxx_ops,
  55         },
  56         {
  57                 .type = INTEL_DVO_CHIP_TMDS,
  58                 .name = "ch7xxx",
  59                 .dvo_reg = DVOC,
  60                 .slave_addr = 0x75, /* For some ch7010 */
  61                 .dev_ops = &ch7xxx_ops,
  62         },
  63         {
  64                 .type = INTEL_DVO_CHIP_LVDS,
  65                 .name = "ivch",
  66                 .dvo_reg = DVOA,
  67                 .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
  68                 .dev_ops = &ivch_ops,
  69         },
  70         {
  71                 .type = INTEL_DVO_CHIP_TMDS,
  72                 .name = "tfp410",
  73                 .dvo_reg = DVOC,
  74                 .slave_addr = TFP410_ADDR,
  75                 .dev_ops = &tfp410_ops,
  76         },
  77         {
  78                 .type = INTEL_DVO_CHIP_LVDS,
  79                 .name = "ch7017",
  80                 .dvo_reg = DVOC,
  81                 .slave_addr = 0x75,
  82                 .gpio = GMBUS_PIN_DPB,
  83                 .dev_ops = &ch7017_ops,
  84         },
  85         {
  86                 .type = INTEL_DVO_CHIP_TMDS,
  87                 .name = "ns2501",
  88                 .dvo_reg = DVOB,
  89                 .slave_addr = NS2501_ADDR,
  90                 .dev_ops = &ns2501_ops,
  91        }
  92 };
  93
  94 struct intel_dvo {
  95         struct intel_encoder base;
  96
  97         struct intel_dvo_device dev;
  98
  99         struct intel_connector *attached_connector;
 100
 101         bool panel_wants_dither;
 102 };
 103
 104 static struct intel_dvo *enc_to_dvo(struct intel_encoder *encoder)
 105 {
 106         return container_of(encoder, struct intel_dvo, base);
 107 }
 108
 109 static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)
 110 {
 111         return enc_to_dvo(intel_attached_encoder(connector));
 112 }
 113
 114 static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector)
 115 {
 116         struct drm_device *dev = connector->base.dev;
 117         struct drm_i915_private *dev_priv = dev->dev_private;
 118         struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base);
 119         u32 tmp;
 120
 121         tmp = I915_READ(intel_dvo->dev.dvo_reg);
 122
 123         if (!(tmp & DVO_ENABLE))
 124                 return false;
 125
 126         return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev);
 127 }
 128
 129 static bool intel_dvo_get_hw_state(struct intel_encoder *encoder,
 130                                    enum i915_pipe *pipe)
 131 {
 132         struct drm_device *dev = encoder->base.dev;
 133         struct drm_i915_private *dev_priv = dev->dev_private;
 134         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 135         u32 tmp;
 136
 137         tmp = I915_READ(intel_dvo->dev.dvo_reg);
 138
 139         if (!(tmp & DVO_ENABLE))
 140                 return false;
 141
 142         *pipe = PORT_TO_PIPE(tmp);
 143
 144         return true;
 145 }
 146
 147 static void intel_dvo_get_config(struct intel_encoder *encoder,
 148                                  struct intel_crtc_state *pipe_config)
 149 {
 150         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 151         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 152         u32 tmp, flags = 0;
 153
 154         tmp = I915_READ(intel_dvo->dev.dvo_reg);
 155         if (tmp & DVO_HSYNC_ACTIVE_HIGH)
 156                 flags |= DRM_MODE_FLAG_PHSYNC;
 157         else
 158                 flags |= DRM_MODE_FLAG_NHSYNC;
 159         if (tmp & DVO_VSYNC_ACTIVE_HIGH)
 160                 flags |= DRM_MODE_FLAG_PVSYNC;
 161         else
 162                 flags |= DRM_MODE_FLAG_NVSYNC;
 163
 164         pipe_config->base.adjusted_mode.flags |= flags;
 165
 166         pipe_config->base.adjusted_mode.crtc_clock = pipe_config->port_clock;
 167 }
 168
 169 static void intel_disable_dvo(struct intel_encoder *encoder)
 170 {
 171         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 172         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 173         u32 dvo_reg = intel_dvo->dev.dvo_reg;
 174         u32 temp = I915_READ(dvo_reg);
 175
 176         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
 177         I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
 178         I915_READ(dvo_reg);
 179 }
 180
 181 static void intel_enable_dvo(struct intel_encoder *encoder)
 182 {
 183         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 184         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 185         struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 186         u32 dvo_reg = intel_dvo->dev.dvo_reg;
 187         u32 temp = I915_READ(dvo_reg);
 188
 189         intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
 190                                          &crtc->config->base.mode,
 191                                          &crtc->config->base.adjusted_mode);
 192
 193         I915_WRITE(dvo_reg, temp | DVO_ENABLE);
 194         I915_READ(dvo_reg);
 195
 196         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 197 }
 198
 199 static enum drm_mode_status
 200 intel_dvo_mode_valid(struct drm_connector *connector,
 201                      struct drm_display_mode *mode)
 202 {
 203         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 204         const struct drm_display_mode *fixed_mode =
 205                 to_intel_connector(connector)->panel.fixed_mode;
 206         int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
 207         int target_clock = mode->clock;
 208
 209         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 210                 return MODE_NO_DBLESCAN;
 211
 212         /* XXX: Validate clock range */
 213
 214         if (fixed_mode) {
 215                 if (mode->hdisplay > fixed_mode->hdisplay)
 216                         return MODE_PANEL;
 217                 if (mode->vdisplay > fixed_mode->vdisplay)
 218                         return MODE_PANEL;
 219
 220                 target_clock = fixed_mode->clock;
 221         }
 222
 223         if (target_clock > max_dotclk)
 224                 return MODE_CLOCK_HIGH;
 225
 226         return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode);
 227 }
 228
 229 static bool intel_dvo_compute_config(struct intel_encoder *encoder,
 230                                      struct intel_crtc_state *pipe_config)
 231 {
 232         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 233         const struct drm_display_mode *fixed_mode =
 234                 intel_dvo->attached_connector->panel.fixed_mode;
 235         struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
 236
 237         /* If we have timings from the BIOS for the panel, put them in
 238          * to the adjusted mode.  The CRTC will be set up for this mode,
 239          * with the panel scaling set up to source from the H/VDisplay
 240          * of the original mode.
 241          */
 242         if (fixed_mode)
 243                 intel_fixed_panel_mode(fixed_mode, adjusted_mode);
 244
 245         return true;
 246 }
 247
 248 static void intel_dvo_pre_enable(struct intel_encoder *encoder)
 249 {
 250         struct drm_device *dev = encoder->base.dev;
 251         struct drm_i915_private *dev_priv = dev->dev_private;
 252         struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 253         const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
 254         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 255         int pipe = crtc->pipe;
 256         u32 dvo_val;
 257         u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg;
 258
 259         switch (dvo_reg) {
 260         case DVOA:
 261         default:
 262                 dvo_srcdim_reg = DVOA_SRCDIM;
 263                 break;
 264         case DVOB:
 265                 dvo_srcdim_reg = DVOB_SRCDIM;
 266                 break;
 267         case DVOC:
 268                 dvo_srcdim_reg = DVOC_SRCDIM;
 269                 break;
 270         }
 271
 272         /* Save the data order, since I don't know what it should be set to. */
 273         dvo_val = I915_READ(dvo_reg) &
 274                   (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);
 275         dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
 276                    DVO_BLANK_ACTIVE_HIGH;
 277
 278         if (pipe == 1)
 279                 dvo_val |= DVO_PIPE_B_SELECT;
 280         dvo_val |= DVO_PIPE_STALL;
 281         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 282                 dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
 283         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 284                 dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
 285
 286         /*I915_WRITE(DVOB_SRCDIM,
 287           (adjusted_mode->crtc_hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
 288           (adjusted_mode->crtc_vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/
 289         I915_WRITE(dvo_srcdim_reg,
 290                    (adjusted_mode->crtc_hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
 291                    (adjusted_mode->crtc_vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
 292         /*I915_WRITE(DVOB, dvo_val);*/
 293         I915_WRITE(dvo_reg, dvo_val);
 294 }
 295
 296 /**
 297  * Detect the output connection on our DVO device.
 298  *
 299  * Unimplemented.
 300  */
 301 static enum drm_connector_status
 302 intel_dvo_detect(struct drm_connector *connector, bool force)
 303 {
 304         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 305         DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
 306                       connector->base.id, connector->name);
 307         return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);
 308 }
 309
 310 static int intel_dvo_get_modes(struct drm_connector *connector)
 311 {
 312         struct drm_i915_private *dev_priv = connector->dev->dev_private;
 313         const struct drm_display_mode *fixed_mode =
 314                 to_intel_connector(connector)->panel.fixed_mode;
 315
 316         /* We should probably have an i2c driver get_modes function for those
 317          * devices which will have a fixed set of modes determined by the chip
 318          * (TV-out, for example), but for now with just TMDS and LVDS,
 319          * that's not the case.
 320          */
 321         intel_ddc_get_modes(connector,
 322                             intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPC));
 323         if (!list_empty(&connector->probed_modes))
 324                 return 1;
 325
 326         if (fixed_mode) {
 327                 struct drm_display_mode *mode;
 328                 mode = drm_mode_duplicate(connector->dev, fixed_mode);
 329                 if (mode) {
 330                         drm_mode_probed_add(connector, mode);
 331                         return 1;
 332                 }
 333         }
 334
 335         return 0;
 336 }
 337
 338 static void intel_dvo_destroy(struct drm_connector *connector)
 339 {
 340         drm_connector_cleanup(connector);
 341         intel_panel_fini(&to_intel_connector(connector)->panel);
 342         kfree(connector);
 343 }
 344
 345 static const struct drm_connector_funcs intel_dvo_connector_funcs = {
 346         .dpms = drm_atomic_helper_connector_dpms,
 347         .detect = intel_dvo_detect,
 348         .destroy = intel_dvo_destroy,
 349         .fill_modes = drm_helper_probe_single_connector_modes,
 350         .atomic_get_property = intel_connector_atomic_get_property,
 351         .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 352         .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 353 };
 354
 355 static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
 356         .mode_valid = intel_dvo_mode_valid,
 357         .get_modes = intel_dvo_get_modes,
 358         .best_encoder = intel_best_encoder,
 359 };
 360
 361 static void intel_dvo_enc_destroy(struct drm_encoder *encoder)
 362 {
 363         struct intel_dvo *intel_dvo = enc_to_dvo(to_intel_encoder(encoder));
 364
 365         if (intel_dvo->dev.dev_ops->destroy)
 366                 intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);
 367
 368         intel_encoder_destroy(encoder);
 369 }
 370
 371 static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
 372         .destroy = intel_dvo_enc_destroy,
 373 };
 374
 375 /**
 376  * Attempts to get a fixed panel timing for LVDS (currently only the i830).
 377  *
 378  * Other chips with DVO LVDS will need to extend this to deal with the LVDS
 379  * chip being on DVOB/C and having multiple pipes.
 380  */
 381 static struct drm_display_mode *
 382 intel_dvo_get_current_mode(struct drm_connector *connector)
 383 {
 384         struct drm_device *dev = connector->dev;
 385         struct drm_i915_private *dev_priv = dev->dev_private;
 386         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 387         uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg);
 388         struct drm_display_mode *mode = NULL;
 389
 390         /* If the DVO port is active, that'll be the LVDS, so we can pull out
 391          * its timings to get how the BIOS set up the panel.
 392          */
 393         if (dvo_val & DVO_ENABLE) {
 394                 struct drm_crtc *crtc;
 395                 int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
 396
 397                 crtc = intel_get_crtc_for_pipe(dev, pipe);
 398                 if (crtc) {
 399                         mode = intel_crtc_mode_get(dev, crtc);
 400                         if (mode) {
 401                                 mode->type |= DRM_MODE_TYPE_PREFERRED;
 402                                 if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
 403                                         mode->flags |= DRM_MODE_FLAG_PHSYNC;
 404                                 if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
 405                                         mode->flags |= DRM_MODE_FLAG_PVSYNC;
 406                         }
 407                 }
 408         }
 409
 410         return mode;
 411 }
 412
 413 void intel_dvo_init(struct drm_device *dev)
 414 {
 415         struct drm_i915_private *dev_priv = dev->dev_private;
 416         struct intel_encoder *intel_encoder;
 417         struct intel_dvo *intel_dvo;
 418         struct intel_connector *intel_connector;
 419         int i;
 420         int encoder_type = DRM_MODE_ENCODER_NONE;
 421
 422         intel_dvo = kzalloc(sizeof(*intel_dvo), GFP_KERNEL);
 423         if (!intel_dvo)
 424                 return;
 425
 426         intel_connector = intel_connector_alloc();
 427         if (!intel_connector) {
 428                 kfree(intel_dvo);
 429                 return;
 430         }
 431
 432         intel_dvo->attached_connector = intel_connector;
 433
 434         intel_encoder = &intel_dvo->base;
 435         drm_encoder_init(dev, &intel_encoder->base,
 436                          &intel_dvo_enc_funcs, encoder_type);
 437
 438         intel_encoder->disable = intel_disable_dvo;
 439         intel_encoder->enable = intel_enable_dvo;
 440         intel_encoder->get_hw_state = intel_dvo_get_hw_state;
 441         intel_encoder->get_config = intel_dvo_get_config;
 442         intel_encoder->compute_config = intel_dvo_compute_config;
 443         intel_encoder->pre_enable = intel_dvo_pre_enable;
 444         intel_connector->get_hw_state = intel_dvo_connector_get_hw_state;
 445         intel_connector->unregister = intel_connector_unregister;
 446
 447         /* Now, try to find a controller */
 448         for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
 449                 struct drm_connector *connector = &intel_connector->base;
 450                 const struct intel_dvo_device *dvo = &intel_dvo_devices[i];
 451                 struct i2c_adapter *i2c;
 452                 int gpio;
 453                 bool dvoinit;
 454                 enum i915_pipe pipe;
 455                 uint32_t dpll[I915_MAX_PIPES];
 456
 457                 /* Allow the I2C driver info to specify the GPIO to be used in
 458                  * special cases, but otherwise default to what's defined
 459                  * in the spec.
 460                  */
 461                 if (intel_gmbus_is_valid_pin(dev_priv, dvo->gpio))
 462                         gpio = dvo->gpio;
 463                 else if (dvo->type == INTEL_DVO_CHIP_LVDS)
 464                         gpio = GMBUS_PIN_SSC;
 465                 else
 466                         gpio = GMBUS_PIN_DPB;
 467
 468                 /* Set up the I2C bus necessary for the chip we're probing.
 469                  * It appears that everything is on GPIOE except for panels
 470                  * on i830 laptops, which are on GPIOB (DVOA).
 471                  */
 472                 i2c = intel_gmbus_get_adapter(dev_priv, gpio);
 473
 474                 intel_dvo->dev = *dvo;
 475
 476                 /* GMBUS NAK handling seems to be unstable, hence let the
 477                  * transmitter detection run in bit banging mode for now.
 478                  */
 479                 intel_gmbus_force_bit(i2c, true);
 480
 481                 /* ns2501 requires the DVO 2x clock before it will
 482                  * respond to i2c accesses, so make sure we have
 483                  * have the clock enabled before we attempt to
 484                  * initialize the device.
 485                  */
 486                 for_each_pipe(dev_priv, pipe) {
 487                         dpll[pipe] = I915_READ(DPLL(pipe));
 488                         I915_WRITE(DPLL(pipe), dpll[pipe] | DPLL_DVO_2X_MODE);
 489                 }
 490
 491                 dvoinit = dvo->dev_ops->init(&intel_dvo->dev, i2c);
 492
 493                 /* restore the DVO 2x clock state to original */
 494                 for_each_pipe(dev_priv, pipe) {
 495                         I915_WRITE(DPLL(pipe), dpll[pipe]);
 496                 }
 497
 498                 intel_gmbus_force_bit(i2c, false);
 499
 500                 if (!dvoinit)
 501                         continue;
 502
 503                 intel_encoder->type = INTEL_OUTPUT_DVO;
 504                 intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
 505                 switch (dvo->type) {
 506                 case INTEL_DVO_CHIP_TMDS:
 507                         intel_encoder->cloneable = (1 << INTEL_OUTPUT_ANALOG) |
 508                                 (1 << INTEL_OUTPUT_DVO);
 509                         drm_connector_init(dev, connector,
 510                                            &intel_dvo_connector_funcs,
 511                                            DRM_MODE_CONNECTOR_DVII);
 512                         encoder_type = DRM_MODE_ENCODER_TMDS;
 513                         break;
 514                 case INTEL_DVO_CHIP_LVDS:
 515                         intel_encoder->cloneable = 0;
 516                         drm_connector_init(dev, connector,
 517                                            &intel_dvo_connector_funcs,
 518                                            DRM_MODE_CONNECTOR_LVDS);
 519                         encoder_type = DRM_MODE_ENCODER_LVDS;
 520                         break;
 521                 }
 522
 523                 drm_connector_helper_add(connector,
 524                                          &intel_dvo_connector_helper_funcs);
 525                 connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 526                 connector->interlace_allowed = false;
 527                 connector->doublescan_allowed = false;
 528
 529                 intel_connector_attach_encoder(intel_connector, intel_encoder);
 530                 if (dvo->type == INTEL_DVO_CHIP_LVDS) {
 531                         /* For our LVDS chipsets, we should hopefully be able
 532                          * to dig the fixed panel mode out of the BIOS data.
 533                          * However, it's in a different format from the BIOS
 534                          * data on chipsets with integrated LVDS (stored in AIM
 535                          * headers, likely), so for now, just get the current
 536                          * mode being output through DVO.
 537                          */
 538                         intel_panel_init(&intel_connector->panel,
 539                                          intel_dvo_get_current_mode(connector),
 540                                          NULL);
 541                         intel_dvo->panel_wants_dither = true;
 542                 }
 543
 544                 drm_connector_register(connector);
 545                 return;
 546         }
 547
 548         drm_encoder_cleanup(&intel_encoder->base);
 549         kfree(intel_dvo);
 550         kfree(intel_connector);
 551 }