2 * Copyright (c) HighPoint Technologies, Inc.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * $FreeBSD: src/sys/dev/hptrr/hptrr_osm_bsd.c,v 1.10 2012/06/17 02:46:27 eadler Exp $
29 #include <dev/raid/hptrr/hptrr_config.h>
30 /* $Id: osm_bsd.c,v 1.27 2007/11/22 07:35:49 gmm Exp $
32 * HighPoint RAID Driver for FreeBSD
33 * Copyright (C) 2005 HighPoint Technologies, Inc. All Rights Reserved.
35 #include <dev/raid/hptrr/os_bsd.h>
36 #include <dev/raid/hptrr/hptintf.h>
38 static int attach_generic = 0;
39 TUNABLE_INT("hw.hptrr.attach_generic", &attach_generic);
41 static int hpt_probe(device_t dev)
48 /* Some of supported chips are used not only by HPT. */
49 if (pci_get_vendor(dev) != 0x1103 && !attach_generic)
51 for (him = him_list; him; him = him->next) {
52 for (i=0; him->get_supported_device_id(i, &pci_id); i++) {
53 if ((pci_get_vendor(dev) == pci_id.vid) &&
54 (pci_get_device(dev) == pci_id.did)){
55 KdPrint(("hpt_probe: adapter at PCI %d:%d:%d, IRQ %d",
56 pci_get_bus(dev), pci_get_slot(dev), pci_get_function(dev), pci_get_irq(dev)
58 device_set_desc(dev, him->name);
59 hba = (PHBA)device_get_softc(dev);
60 memset(hba, 0, sizeof(HBA));
61 hba->ext_type = EXT_TYPE_HBA;
62 hba->ldm_adapter.him = him;
71 static int hpt_attach(device_t dev)
73 PHBA hba = (PHBA)device_get_softc(dev);
74 HIM *him = hba->ldm_adapter.him;
80 KdPrint(("hpt_attach(%d/%d/%d)", pci_get_bus(dev), pci_get_slot(dev), pci_get_function(dev)));
82 pci_enable_busmaster(dev);
84 pci_id.vid = pci_get_vendor(dev);
85 pci_id.did = pci_get_device(dev);
86 pci_id.rev = pci_get_revid(dev);
88 size = him->get_adapter_size(&pci_id);
89 hba->ldm_adapter.him_handle = kmalloc(size, M_DEVBUF, M_WAITOK);
90 if (!hba->ldm_adapter.him_handle)
94 hba->pciaddr.tree = 0;
95 hba->pciaddr.bus = pci_get_bus(dev);
96 hba->pciaddr.device = pci_get_slot(dev);
97 hba->pciaddr.function = pci_get_function(dev);
99 if (!him->create_adapter(&pci_id, hba->pciaddr, hba->ldm_adapter.him_handle, hba)) {
100 kfree(hba->ldm_adapter.him_handle, M_DEVBUF);
104 os_printk("adapter at PCI %d:%d:%d, IRQ %d",
105 hba->pciaddr.bus, hba->pciaddr.device, hba->pciaddr.function, pci_get_irq(dev));
107 if (!ldm_register_adapter(&hba->ldm_adapter)) {
108 size = ldm_get_vbus_size();
109 vbus_ext = kmalloc(sizeof(VBUS_EXT) + size, M_DEVBUF, M_WAITOK);
110 memset(vbus_ext, 0, sizeof(VBUS_EXT));
111 vbus_ext->ext_type = EXT_TYPE_VBUS;
112 ldm_create_vbus((PVBUS)vbus_ext->vbus, vbus_ext);
113 ldm_register_adapter(&hba->ldm_adapter);
116 ldm_for_each_vbus(vbus, vbus_ext) {
117 if (hba->ldm_adapter.vbus==vbus) {
118 hba->vbus_ext = vbus_ext;
119 hba->next = vbus_ext->hba_list;
120 vbus_ext->hba_list = hba;
128 * Maybe we'd better to use the bus_dmamem_alloc to alloc DMA memory,
129 * but there are some problems currently (alignment, etc).
131 static __inline void *__get_free_pages(int order)
133 /* don't use low memory - other devices may get starved */
134 return contigmalloc(PAGE_SIZE<<order,
135 M_DEVBUF, M_WAITOK, BUS_SPACE_MAXADDR_24BIT, BUS_SPACE_MAXADDR, PAGE_SIZE, 0);
138 static __inline void free_pages(void *p, int order)
140 contigfree(p, PAGE_SIZE<<order, M_DEVBUF);
143 static int hpt_alloc_mem(PVBUS_EXT vbus_ext)
150 for (hba = vbus_ext->hba_list; hba; hba = hba->next)
151 hba->ldm_adapter.him->get_meminfo(hba->ldm_adapter.him_handle);
153 ldm_get_mem_info((PVBUS)vbus_ext->vbus, 0);
155 for (f=vbus_ext->freelist_head; f; f=f->next) {
156 KdPrint(("%s: %d*%d=%d bytes",
157 f->tag, f->count, f->size, f->count*f->size));
158 for (i=0; i<f->count; i++) {
159 p = (void **)kmalloc(f->size, M_DEVBUF, M_WAITOK);
160 if (!p) return (ENXIO);
166 for (f=vbus_ext->freelist_dma_head; f; f=f->next) {
169 HPT_ASSERT((f->size & (f->alignment-1))==0);
171 for (order=0, size=PAGE_SIZE; size<f->size; order++, size<<=1) ;
173 KdPrint(("%s: %d*%d=%d bytes, order %d",
174 f->tag, f->count, f->size, f->count*f->size, order));
175 HPT_ASSERT(f->alignment<=PAGE_SIZE);
177 for (i=0; i<f->count;) {
178 p = (void **)__get_free_pages(order);
180 for (j = size/f->size; j && i<f->count; i++,j--) {
182 *(BUS_ADDRESS *)(p+1) = (BUS_ADDRESS)vtophys(p);
184 p = (void **)((unsigned long)p + f->size);
189 HPT_ASSERT(PAGE_SIZE==DMAPOOL_PAGE_SIZE);
191 for (i=0; i<os_max_cache_pages; i++) {
192 p = (void **)__get_free_pages(0);
194 HPT_ASSERT(((HPT_UPTR)p & (DMAPOOL_PAGE_SIZE-1))==0);
195 dmapool_put_page((PVBUS)vbus_ext->vbus, p, (BUS_ADDRESS)vtophys(p));
201 static void hpt_free_mem(PVBUS_EXT vbus_ext)
208 for (f=vbus_ext->freelist_head; f; f=f->next) {
210 if (f->count!=f->reserved_count) {
211 KdPrint(("memory leak for freelist %s (%d/%d)", f->tag, f->count, f->reserved_count));
214 while ((p=freelist_get(f)))
218 for (i=0; i<os_max_cache_pages; i++) {
219 p = dmapool_get_page((PVBUS)vbus_ext->vbus, &bus);
224 for (f=vbus_ext->freelist_dma_head; f; f=f->next) {
227 if (f->count!=f->reserved_count) {
228 KdPrint(("memory leak for dma freelist %s (%d/%d)", f->tag, f->count, f->reserved_count));
231 for (order=0, size=PAGE_SIZE; size<f->size; order++, size<<=1) ;
233 while ((p=freelist_get_dma(f, &bus))) {
235 free_pages(p, order);
237 /* can't free immediately since other blocks in this page may still be in the list */
238 if (((HPT_UPTR)p & (PAGE_SIZE-1))==0)
239 dmapool_put_page((PVBUS)vbus_ext->vbus, p, bus);
244 while ((p = dmapool_get_page((PVBUS)vbus_ext->vbus, &bus)))
248 static int hpt_init_vbus(PVBUS_EXT vbus_ext)
252 for (hba = vbus_ext->hba_list; hba; hba = hba->next)
253 if (!hba->ldm_adapter.him->initialize(hba->ldm_adapter.him_handle)) {
254 KdPrint(("fail to initialize %p", hba));
258 ldm_initialize_vbus((PVBUS)vbus_ext->vbus, &vbus_ext->hba_list->ldm_adapter);
262 static void hpt_flush_done(PCOMMAND pCmd)
264 PVDEV vd = pCmd->target;
266 if (mIsArray(vd->type) && vd->u.array.transform && vd!=vd->u.array.transform->target) {
267 vd = vd->u.array.transform->target;
270 pCmd->Result = RETURN_PENDING;
271 vdev_queue_cmd(pCmd);
275 *(int *)pCmd->priv = 1;
280 * flush a vdev (without retry).
282 static int hpt_flush_vdev(PVBUS_EXT vbus_ext, PVDEV vd)
285 int result = 0, done;
288 KdPrint(("flusing dev %p", vd));
290 hpt_lock_vbus(vbus_ext);
292 if (mIsArray(vd->type) && vd->u.array.transform)
293 count = MAX(vd->u.array.transform->source->cmds_per_request,
294 vd->u.array.transform->target->cmds_per_request);
296 count = vd->cmds_per_request;
298 pCmd = ldm_alloc_cmds(vd->vbus, count);
301 hpt_unlock_vbus(vbus_ext);
305 pCmd->type = CMD_TYPE_FLUSH;
306 pCmd->flags.hard_flush = 1;
308 pCmd->done = hpt_flush_done;
315 while (hpt_sleep(vbus_ext, pCmd, 0, "hptfls", HPT_OSM_TIMEOUT)) {
316 ldm_reset_vbus(vd->vbus);
320 KdPrint(("flush result %d", pCmd->Result));
322 if (pCmd->Result!=RETURN_SUCCESS)
327 hpt_unlock_vbus(vbus_ext);
332 static void hpt_stop_tasks(PVBUS_EXT vbus_ext);
333 static void hpt_shutdown_vbus(PVBUS_EXT vbus_ext, int howto)
335 PVBUS vbus = (PVBUS)vbus_ext->vbus;
339 KdPrint(("hpt_shutdown_vbus"));
341 /* stop all ctl tasks and disable the worker taskqueue */
342 hpt_stop_tasks(vbus_ext);
343 vbus_ext->worker.ta_context = NULL;
346 for (i=0; i<osm_max_targets; i++) {
347 PVDEV vd = ldm_find_target(vbus, i);
350 if (hpt_flush_vdev(vbus_ext, vd))
351 hpt_flush_vdev(vbus_ext, vd);
355 hpt_lock_vbus(vbus_ext);
357 hpt_unlock_vbus(vbus_ext);
359 ldm_release_vbus(vbus);
361 for (hba=vbus_ext->hba_list; hba; hba=hba->next)
362 bus_teardown_intr(hba->pcidev, hba->irq_res, hba->irq_handle);
364 hpt_free_mem(vbus_ext);
366 while ((hba=vbus_ext->hba_list)) {
367 vbus_ext->hba_list = hba->next;
368 kfree(hba->ldm_adapter.him_handle, M_DEVBUF);
371 kfree(vbus_ext, M_DEVBUF);
372 KdPrint(("hpt_shutdown_vbus done"));
375 static void __hpt_do_tasks(PVBUS_EXT vbus_ext)
379 tasks = vbus_ext->tasks;
380 vbus_ext->tasks = NULL;
386 t->func(vbus_ext->vbus, t->data);
390 static void hpt_do_tasks(PVBUS_EXT vbus_ext, int pending)
393 hpt_lock_vbus(vbus_ext);
394 __hpt_do_tasks(vbus_ext);
395 hpt_unlock_vbus(vbus_ext);
399 static void hpt_action(struct cam_sim *sim, union ccb *ccb);
400 static void hpt_poll(struct cam_sim *sim);
401 static void hpt_async(void * callback_arg, u_int32_t code, struct cam_path * path, void * arg);
402 static void hpt_pci_intr(void *arg);
404 static __inline POS_CMDEXT cmdext_get(PVBUS_EXT vbus_ext)
406 POS_CMDEXT p = vbus_ext->cmdext_list;
408 vbus_ext->cmdext_list = p->next;
412 static __inline void cmdext_put(POS_CMDEXT p)
414 p->next = p->vbus_ext->cmdext_list;
415 p->vbus_ext->cmdext_list = p;
418 static void hpt_timeout(void *arg)
420 PCOMMAND pCmd = (PCOMMAND)arg;
421 POS_CMDEXT ext = (POS_CMDEXT)pCmd->priv;
423 KdPrint(("pCmd %p timeout", pCmd));
425 ldm_reset_vbus((PVBUS)ext->vbus_ext->vbus);
428 static void os_cmddone(PCOMMAND pCmd)
430 POS_CMDEXT ext = (POS_CMDEXT)pCmd->priv;
431 union ccb *ccb = ext->ccb;
433 KdPrint(("os_cmddone(%p, %d)", pCmd, pCmd->Result));
435 callout_stop(&ccb->ccb_h.timeout_ch);
437 switch(pCmd->Result) {
439 ccb->ccb_h.status = CAM_REQ_CMP;
441 case RETURN_BAD_DEVICE:
442 ccb->ccb_h.status = CAM_DEV_NOT_THERE;
444 case RETURN_DEVICE_BUSY:
445 ccb->ccb_h.status = CAM_BUSY;
447 case RETURN_INVALID_REQUEST:
448 ccb->ccb_h.status = CAM_REQ_INVALID;
450 case RETURN_SELECTION_TIMEOUT:
451 ccb->ccb_h.status = CAM_SEL_TIMEOUT;
454 ccb->ccb_h.status = CAM_BUSY;
457 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
461 if (pCmd->flags.data_in) {
462 bus_dmamap_sync(ext->vbus_ext->io_dmat, ext->dma_map, BUS_DMASYNC_POSTREAD);
464 else if (pCmd->flags.data_out) {
465 bus_dmamap_sync(ext->vbus_ext->io_dmat, ext->dma_map, BUS_DMASYNC_POSTWRITE);
468 bus_dmamap_unload(ext->vbus_ext->io_dmat, ext->dma_map);
475 static int os_buildsgl(PCOMMAND pCmd, PSG pSg, int logical)
477 POS_CMDEXT ext = (POS_CMDEXT)pCmd->priv;
478 union ccb *ccb = ext->ccb;
479 bus_dma_segment_t *sgList = (bus_dma_segment_t *)ccb->csio.data_ptr;
483 if (ccb->ccb_h.flags & CAM_DATA_PHYS)
484 panic("physical address unsupported");
486 if (ccb->ccb_h.flags & CAM_SCATTER_VALID) {
487 if (ccb->ccb_h.flags & CAM_SG_LIST_PHYS)
488 panic("physical address unsupported");
490 for (idx = 0; idx < ccb->csio.sglist_cnt; idx++) {
491 os_set_sgptr(&pSg[idx], (HPT_U8 *)(HPT_UPTR)sgList[idx].ds_addr);
492 pSg[idx].size = sgList[idx].ds_len;
493 pSg[idx].eot = (idx==ccb->csio.sglist_cnt-1)? 1 : 0;
497 os_set_sgptr(pSg, (HPT_U8 *)ccb->csio.data_ptr);
498 pSg->size = ccb->csio.dxfer_len;
504 /* since we have provided physical sg, nobody will ask us to build physical sg */
509 static void hpt_io_dmamap_callback(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
511 PCOMMAND pCmd = (PCOMMAND)arg;
512 POS_CMDEXT ext = (POS_CMDEXT)pCmd->priv;
516 HPT_ASSERT(pCmd->flags.physical_sg);
518 if (error || nsegs == 0)
519 panic("busdma error");
521 HPT_ASSERT(nsegs<=os_max_sg_descriptors);
523 for (idx = 0; idx < nsegs; idx++, psg++) {
524 psg->addr.bus = segs[idx].ds_addr;
525 psg->size = segs[idx].ds_len;
530 if (pCmd->flags.data_in) {
531 bus_dmamap_sync(ext->vbus_ext->io_dmat, ext->dma_map, BUS_DMASYNC_PREREAD);
533 else if (pCmd->flags.data_out) {
534 bus_dmamap_sync(ext->vbus_ext->io_dmat, ext->dma_map, BUS_DMASYNC_PREWRITE);
537 callout_reset(&ext->ccb->ccb_h.timeout_ch, HPT_OSM_TIMEOUT, hpt_timeout, pCmd);
541 static void hpt_scsi_io(PVBUS_EXT vbus_ext, union ccb *ccb)
543 PVBUS vbus = (PVBUS)vbus_ext->vbus;
549 if (ccb->ccb_h.flags & CAM_CDB_POINTER)
550 cdb = ccb->csio.cdb_io.cdb_ptr;
552 cdb = ccb->csio.cdb_io.cdb_bytes;
554 KdPrint(("hpt_scsi_io: ccb %x id %d lun %d cdb %x-%x-%x",
556 ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
557 *(HPT_U32 *)&cdb[0], *(HPT_U32 *)&cdb[4], *(HPT_U32 *)&cdb[8]
560 /* ccb->ccb_h.path_id is not our bus id - don't check it */
561 if (ccb->ccb_h.target_lun != 0 ||
562 ccb->ccb_h.target_id >= osm_max_targets ||
563 (ccb->ccb_h.flags & CAM_CDB_PHYS))
565 ccb->ccb_h.status = CAM_TID_INVALID;
570 vd = ldm_find_target(vbus, ccb->ccb_h.target_id);
573 ccb->ccb_h.status = CAM_TID_INVALID;
579 case TEST_UNIT_READY:
580 case START_STOP_UNIT:
581 case SYNCHRONIZE_CACHE:
582 ccb->ccb_h.status = CAM_REQ_CMP;
587 PINQUIRYDATA inquiryData;
588 memset(ccb->csio.data_ptr, 0, ccb->csio.dxfer_len);
589 inquiryData = (PINQUIRYDATA)ccb->csio.data_ptr;
591 inquiryData->AdditionalLength = 31;
592 inquiryData->CommandQueue = 1;
593 memcpy(&inquiryData->VendorId, "HPT ", 8);
594 memcpy(&inquiryData->ProductId, "DISK 0_0 ", 16);
596 if (vd->target_id / 10) {
597 inquiryData->ProductId[7] = (vd->target_id % 100) / 10 + '0';
598 inquiryData->ProductId[8] = (vd->target_id % 100) % 10 + '0';
601 inquiryData->ProductId[7] = (vd->target_id % 100) % 10 + '0';
603 memcpy(&inquiryData->ProductRevisionLevel, "4.00", 4);
605 ccb->ccb_h.status = CAM_REQ_CMP;
611 HPT_U8 *rbuf = ccb->csio.data_ptr;
614 if (vd->capacity>0xfffffffful)
617 cap = vd->capacity - 1;
619 rbuf[0] = (HPT_U8)(cap>>24);
620 rbuf[1] = (HPT_U8)(cap>>16);
621 rbuf[2] = (HPT_U8)(cap>>8);
622 rbuf[3] = (HPT_U8)cap;
628 ccb->ccb_h.status = CAM_REQ_CMP;
632 case SERVICE_ACTION_IN:
634 HPT_U8 *rbuf = ccb->csio.data_ptr;
635 HPT_U64 cap = vd->capacity - 1;
637 rbuf[0] = (HPT_U8)(cap>>56);
638 rbuf[1] = (HPT_U8)(cap>>48);
639 rbuf[2] = (HPT_U8)(cap>>40);
640 rbuf[3] = (HPT_U8)(cap>>32);
641 rbuf[4] = (HPT_U8)(cap>>24);
642 rbuf[5] = (HPT_U8)(cap>>16);
643 rbuf[6] = (HPT_U8)(cap>>8);
644 rbuf[7] = (HPT_U8)cap;
650 ccb->ccb_h.status = CAM_REQ_CMP;
663 pCmd = ldm_alloc_cmds(vbus, vd->cmds_per_request);
665 KdPrint(("Failed to allocate command!"));
666 ccb->ccb_h.status = CAM_BUSY;
674 pCmd->uCmd.Ide.Lba = ((HPT_U32)cdb[1] << 16) | ((HPT_U32)cdb[2] << 8) | (HPT_U32)cdb[3];
675 pCmd->uCmd.Ide.nSectors = (HPT_U16) cdb[4];
681 ((HPT_U64)cdb[2]<<56) |
682 ((HPT_U64)cdb[3]<<48) |
683 ((HPT_U64)cdb[4]<<40) |
684 ((HPT_U64)cdb[5]<<32) |
685 ((HPT_U64)cdb[6]<<24) |
686 ((HPT_U64)cdb[7]<<16) |
687 ((HPT_U64)cdb[8]<<8) |
689 pCmd->uCmd.Ide.Lba = block;
690 pCmd->uCmd.Ide.nSectors = (HPT_U16)cdb[13] | ((HPT_U16)cdb[12]<<8);
695 pCmd->uCmd.Ide.Lba = (HPT_U32)cdb[5] | ((HPT_U32)cdb[4] << 8) | ((HPT_U32)cdb[3] << 16) | ((HPT_U32)cdb[2] << 24);
696 pCmd->uCmd.Ide.nSectors = (HPT_U16) cdb[8] | ((HPT_U16)cdb[7]<<8);
704 pCmd->flags.data_in = 1;
709 pCmd->flags.data_out = 1;
712 pCmd->priv = ext = cmdext_get(vbus_ext);
716 pCmd->done = os_cmddone;
717 pCmd->buildsgl = os_buildsgl;
719 pCmd->psg = ext->psg;
721 if (ccb->ccb_h.flags & CAM_SCATTER_VALID) {
723 bus_dma_segment_t *sgList = (bus_dma_segment_t *)ccb->csio.data_ptr;
725 if (ccb->ccb_h.flags & CAM_SG_LIST_PHYS)
726 pCmd->flags.physical_sg = 1;
728 for (idx = 0; idx < ccb->csio.sglist_cnt; idx++) {
729 pCmd->psg[idx].addr.bus = sgList[idx].ds_addr;
730 pCmd->psg[idx].size = sgList[idx].ds_len;
731 pCmd->psg[idx].eot = (idx==ccb->csio.sglist_cnt-1)? 1 : 0;
734 callout_reset(&ccb->ccb_h.timeout_ch, HPT_OSM_TIMEOUT, hpt_timeout, pCmd);
739 pCmd->flags.physical_sg = 1;
740 error = bus_dmamap_load(vbus_ext->io_dmat,
742 ccb->csio.data_ptr, ccb->csio.dxfer_len,
743 hpt_io_dmamap_callback, pCmd,
746 KdPrint(("bus_dmamap_load return %d", error));
747 if (error && error!=EINPROGRESS) {
748 os_printk("bus_dmamap_load error %d", error);
751 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
759 ccb->ccb_h.status = CAM_REQ_INVALID;
767 static void hpt_action(struct cam_sim *sim, union ccb *ccb)
769 PVBUS_EXT vbus_ext = (PVBUS_EXT)cam_sim_softc(sim);
771 KdPrint(("hpt_action(fn=%d, id=%d)", ccb->ccb_h.func_code, ccb->ccb_h.target_id));
773 switch (ccb->ccb_h.func_code) {
776 hpt_lock_vbus(vbus_ext);
777 hpt_scsi_io(vbus_ext, ccb);
778 hpt_unlock_vbus(vbus_ext);
782 hpt_lock_vbus(vbus_ext);
783 ldm_reset_vbus((PVBUS)vbus_ext->vbus);
784 hpt_unlock_vbus(vbus_ext);
787 case XPT_GET_TRAN_SETTINGS:
788 case XPT_SET_TRAN_SETTINGS:
789 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
792 case XPT_CALC_GEOMETRY:
793 cam_calc_geometry(&ccb->ccg, 1);
798 struct ccb_pathinq *cpi = &ccb->cpi;
800 cpi->version_num = 1;
801 cpi->hba_inquiry = PI_SDTR_ABLE;
802 cpi->target_sprt = 0;
803 cpi->hba_misc = PIM_NOBUSRESET;
804 cpi->hba_eng_cnt = 0;
805 cpi->max_target = osm_max_targets;
807 cpi->unit_number = cam_sim_unit(sim);
808 cpi->bus_id = cam_sim_bus(sim);
809 cpi->initiator_id = osm_max_targets;
810 cpi->base_transfer_speed = 3300;
812 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
813 strncpy(cpi->hba_vid, "HPT ", HBA_IDLEN);
814 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
815 cpi->transport = XPORT_SPI;
816 cpi->transport_version = 2;
817 cpi->protocol = PROTO_SCSI;
818 cpi->protocol_version = SCSI_REV_2;
819 cpi->maxio = HPTRR_DFLTPHYS;
820 cpi->ccb_h.status = CAM_REQ_CMP;
825 ccb->ccb_h.status = CAM_REQ_INVALID;
833 static void hpt_pci_intr(void *arg)
835 PVBUS_EXT vbus_ext = (PVBUS_EXT)arg;
836 hpt_lock_vbus(vbus_ext);
837 ldm_intr((PVBUS)vbus_ext->vbus);
838 hpt_unlock_vbus(vbus_ext);
841 static void hpt_poll(struct cam_sim *sim)
843 hpt_pci_intr(cam_sim_softc(sim));
846 static void hpt_async(void * callback_arg, u_int32_t code, struct cam_path * path, void * arg)
848 KdPrint(("hpt_async"));
851 static int hpt_shutdown(device_t dev)
853 KdPrint(("hpt_shutdown(dev=%p)", dev));
857 static int hpt_detach(device_t dev)
859 /* we don't allow the driver to be unloaded. */
863 static void hpt_ioctl_done(struct _IOCTL_ARG *arg)
865 arg->ioctl_cmnd = NULL;
869 static void __hpt_do_ioctl(PVBUS_EXT vbus_ext, IOCTL_ARG *ioctl_args)
871 ioctl_args->result = -1;
872 ioctl_args->done = hpt_ioctl_done;
873 ioctl_args->ioctl_cmnd = (void *)1;
875 hpt_lock_vbus(vbus_ext);
876 ldm_ioctl((PVBUS)vbus_ext->vbus, ioctl_args);
878 while (ioctl_args->ioctl_cmnd) {
879 if (hpt_sleep(vbus_ext, ioctl_args, 0, "hptctl", HPT_OSM_TIMEOUT)==0)
881 ldm_reset_vbus((PVBUS)vbus_ext->vbus);
882 __hpt_do_tasks(vbus_ext);
885 /* KdPrint(("ioctl %x result %d", ioctl_args->dwIoControlCode, ioctl_args->result)); */
887 hpt_unlock_vbus(vbus_ext);
890 static void hpt_do_ioctl(IOCTL_ARG *ioctl_args)
895 ldm_for_each_vbus(vbus, vbus_ext) {
896 __hpt_do_ioctl(vbus_ext, ioctl_args);
897 if (ioctl_args->result!=HPT_IOCTL_RESULT_WRONG_VBUS)
902 #define HPT_DO_IOCTL(code, inbuf, insize, outbuf, outsize) ({\
904 arg.dwIoControlCode = code;\
905 arg.lpInBuffer = inbuf;\
906 arg.lpOutBuffer = outbuf;\
907 arg.nInBufferSize = insize;\
908 arg.nOutBufferSize = outsize;\
909 arg.lpBytesReturned = NULL;\
914 #define DEVICEID_VALID(id) ((id) && ((HPT_U32)(id)!=0xffffffff))
916 static int hpt_get_logical_devices(DEVICEID * pIds, int nMaxCount)
919 HPT_U32 count = nMaxCount-1;
921 if (HPT_DO_IOCTL(HPT_IOCTL_GET_LOGICAL_DEVICES,
922 &count, sizeof(HPT_U32), pIds, sizeof(DEVICEID)*nMaxCount))
925 nMaxCount = (int)pIds[0];
926 for (i=0; i<nMaxCount; i++) pIds[i] = pIds[i+1];
930 static int hpt_get_device_info_v3(DEVICEID id, PLOGICAL_DEVICE_INFO_V3 pInfo)
932 return HPT_DO_IOCTL(HPT_IOCTL_GET_DEVICE_INFO_V3,
933 &id, sizeof(DEVICEID), pInfo, sizeof(LOGICAL_DEVICE_INFO_V3));
936 /* not belong to this file logically, but we want to use ioctl interface */
937 static int __hpt_stop_tasks(PVBUS_EXT vbus_ext, DEVICEID id)
939 LOGICAL_DEVICE_INFO_V3 devinfo;
941 DEVICEID param[2] = { id, 0 };
943 if (hpt_get_device_info_v3(id, &devinfo))
946 if (devinfo.Type!=LDT_ARRAY)
949 if (devinfo.u.array.Flags & ARRAY_FLAG_REBUILDING)
950 param[1] = AS_REBUILD_ABORT;
951 else if (devinfo.u.array.Flags & ARRAY_FLAG_VERIFYING)
952 param[1] = AS_VERIFY_ABORT;
953 else if (devinfo.u.array.Flags & ARRAY_FLAG_INITIALIZING)
954 param[1] = AS_INITIALIZE_ABORT;
955 else if (devinfo.u.array.Flags & ARRAY_FLAG_TRANSFORMING)
956 param[1] = AS_TRANSFORM_ABORT;
960 KdPrint(("SET_ARRAY_STATE(%x, %d)", param[0], param[1]));
961 result = HPT_DO_IOCTL(HPT_IOCTL_SET_ARRAY_STATE,
962 param, sizeof(param), NULL, 0);
964 for (i=0; i<devinfo.u.array.nDisk; i++)
965 if (DEVICEID_VALID(devinfo.u.array.Members[i]))
966 __hpt_stop_tasks(vbus_ext, devinfo.u.array.Members[i]);
971 static void hpt_stop_tasks(PVBUS_EXT vbus_ext)
976 count = hpt_get_logical_devices((DEVICEID *)&ids, sizeof(ids)/sizeof(ids[0]));
978 for (i=0; i<count; i++)
979 __hpt_stop_tasks(vbus_ext, ids[i]);
982 static d_open_t hpt_open;
983 static d_close_t hpt_close;
984 static d_ioctl_t hpt_ioctl;
985 static int hpt_rescan_bus(void);
986 static void hpt_rescan_callback(struct cam_periph *periph, union ccb *ccb);
988 static struct dev_ops hpt_ops = {
989 { driver_name, 0, 0 },
991 .d_close = hpt_close,
992 .d_ioctl = hpt_ioctl,
995 static struct intr_config_hook hpt_ich;
998 * hpt_final_init will be called after all hpt_attach.
1000 static void hpt_final_init(void *dummy)
1007 /* Clear the config hook */
1008 config_intrhook_disestablish(&hpt_ich);
1010 /* allocate memory */
1012 ldm_for_each_vbus(vbus, vbus_ext) {
1013 if (hpt_alloc_mem(vbus_ext)) {
1014 os_printk("out of memory");
1022 os_printk("no controller detected.");
1026 /* initializing hardware */
1027 ldm_for_each_vbus(vbus, vbus_ext) {
1028 /* make timer available here */
1029 callout_init(&vbus_ext->timer);
1030 if (hpt_init_vbus(vbus_ext)) {
1031 os_printk("fail to initialize hardware");
1036 /* register CAM interface */
1037 ldm_for_each_vbus(vbus, vbus_ext) {
1038 struct cam_devq *devq;
1039 struct ccb_setasync ccb;
1041 lockinit(&vbus_ext->lock, "hptsleeplock", 0, LK_CANRECURSE);
1042 if (bus_dma_tag_create(NULL,/* parent */
1044 BUS_SPACE_MAXADDR_32BIT+1, /* boundary */
1045 BUS_SPACE_MAXADDR, /* lowaddr */
1046 BUS_SPACE_MAXADDR, /* highaddr */
1047 NULL, NULL, /* filter, filterarg */
1048 PAGE_SIZE * (os_max_sg_descriptors-1), /* maxsize */
1049 os_max_sg_descriptors, /* nsegments */
1050 0x10000, /* maxsegsize */
1051 BUS_DMA_WAITOK, /* flags */
1052 &vbus_ext->io_dmat /* tag */))
1057 for (i=0; i<os_max_queue_comm; i++) {
1058 POS_CMDEXT ext = (POS_CMDEXT)kmalloc(sizeof(OS_CMDEXT), M_DEVBUF, M_WAITOK);
1060 os_printk("Can't alloc cmdext(%d)", i);
1063 ext->vbus_ext = vbus_ext;
1064 ext->next = vbus_ext->cmdext_list;
1065 vbus_ext->cmdext_list = ext;
1067 if (bus_dmamap_create(vbus_ext->io_dmat, 0, &ext->dma_map)) {
1068 os_printk("Can't create dma map(%d)", i);
1073 if ((devq = cam_simq_alloc(os_max_queue_comm)) == NULL) {
1074 os_printk("cam_simq_alloc failed");
1078 vbus_ext->sim = cam_sim_alloc(hpt_action, hpt_poll, driver_name,
1079 vbus_ext, 0, &sim_mplock, os_max_queue_comm, /*tagged*/8, devq);
1080 cam_simq_release(devq);
1082 if (!vbus_ext->sim) {
1083 os_printk("cam_sim_alloc failed");
1087 if (xpt_bus_register(vbus_ext->sim, 0) != CAM_SUCCESS) {
1088 os_printk("xpt_bus_register failed");
1089 cam_sim_free(vbus_ext->sim);
1090 vbus_ext->sim = NULL;
1094 if (xpt_create_path(&vbus_ext->path, /*periph */ NULL,
1095 cam_sim_path(vbus_ext->sim), CAM_TARGET_WILDCARD,
1096 CAM_LUN_WILDCARD) != CAM_REQ_CMP)
1098 os_printk("xpt_create_path failed");
1099 xpt_bus_deregister(cam_sim_path(vbus_ext->sim));
1100 cam_sim_free(vbus_ext->sim);
1101 vbus_ext->sim = NULL;
1105 xpt_setup_ccb(&ccb.ccb_h, vbus_ext->path, /*priority*/5);
1106 ccb.ccb_h.func_code = XPT_SASYNC_CB;
1107 ccb.event_enable = AC_LOST_DEVICE;
1108 ccb.callback = hpt_async;
1109 ccb.callback_arg = vbus_ext;
1110 xpt_action((union ccb *)&ccb);
1112 for (hba = vbus_ext->hba_list; hba; hba = hba->next) {
1114 if ((hba->irq_res = bus_alloc_resource(hba->pcidev,
1115 SYS_RES_IRQ, &rid, 0, ~0ul, 1, RF_SHAREABLE | RF_ACTIVE)) == NULL)
1117 os_printk("can't allocate interrupt");
1121 if (bus_setup_intr(hba->pcidev, hba->irq_res, 0,
1122 hpt_pci_intr, vbus_ext, &hba->irq_handle, NULL))
1124 os_printk("can't set up interrupt");
1127 hba->ldm_adapter.him->intr_control(hba->ldm_adapter.him_handle, HPT_TRUE);
1130 vbus_ext->shutdown_eh = EVENTHANDLER_REGISTER(shutdown_final,
1131 hpt_shutdown_vbus, vbus_ext, SHUTDOWN_PRI_DEFAULT);
1132 if (!vbus_ext->shutdown_eh)
1133 os_printk("Shutdown event registration failed");
1136 ldm_for_each_vbus(vbus, vbus_ext) {
1137 TASK_INIT(&vbus_ext->worker, 0, (task_fn_t *)hpt_do_tasks, vbus_ext);
1138 if (vbus_ext->tasks)
1139 TASK_ENQUEUE(&vbus_ext->worker);
1142 make_dev(&hpt_ops, DRIVER_MINOR, UID_ROOT, GID_OPERATOR,
1143 S_IRUSR | S_IWUSR, "%s", driver_name);
1146 #if defined(KLD_MODULE)
1148 typedef struct driverlink *driverlink_t;
1150 kobj_class_t driver;
1151 TAILQ_ENTRY(driverlink) link; /* list of drivers in devclass */
1154 typedef TAILQ_HEAD(driver_list, driverlink) driver_list_t;
1157 TAILQ_ENTRY(devclass) link;
1158 devclass_t parent; /* parent in devclass hierarchy */
1159 driver_list_t drivers; /* bus devclasses store drivers for bus */
1161 device_t *devices; /* array of devices indexed by unit */
1162 int maxunit; /* size of devices array */
1165 static void override_kernel_driver(void)
1167 driverlink_t dl, dlfirst;
1168 driver_t *tmpdriver;
1169 devclass_t dc = devclass_find("pci");
1172 dlfirst = TAILQ_FIRST(&dc->drivers);
1173 for (dl = dlfirst; dl; dl = TAILQ_NEXT(dl, link)) {
1174 if(strcmp(dl->driver->name, driver_name) == 0) {
1175 tmpdriver=dl->driver;
1176 dl->driver=dlfirst->driver;
1177 dlfirst->driver=tmpdriver;
1185 #define override_kernel_driver()
1188 static void hpt_init(void *dummy)
1191 os_printk("%s %s", driver_name_long, driver_ver);
1193 override_kernel_driver();
1196 hpt_ich.ich_func = hpt_final_init;
1197 hpt_ich.ich_arg = NULL;
1198 hpt_ich.ich_desc = "hptrr";
1199 if (config_intrhook_establish(&hpt_ich) != 0) {
1200 kprintf("%s: cannot establish configuration hook\n",
1205 SYSINIT(hptinit, SI_SUB_CONFIGURE, SI_ORDER_FIRST, hpt_init, NULL);
1208 * CAM driver interface
1210 static device_method_t driver_methods[] = {
1211 /* Device interface */
1212 DEVMETHOD(device_probe, hpt_probe),
1213 DEVMETHOD(device_attach, hpt_attach),
1214 DEVMETHOD(device_detach, hpt_detach),
1215 DEVMETHOD(device_shutdown, hpt_shutdown),
1219 static driver_t hpt_pci_driver = {
1225 static devclass_t hpt_devclass;
1228 #error "no TARGETNAME found"
1231 /* use this to make TARGETNAME be expanded */
1232 #define __DRIVER_MODULE(p1, p2, p3, p4, p5, p6) DRIVER_MODULE(p1, p2, p3, p4, p5, p6)
1233 #define __MODULE_VERSION(p1, p2) MODULE_VERSION(p1, p2)
1234 #define __MODULE_DEPEND(p1, p2, p3, p4, p5) MODULE_DEPEND(p1, p2, p3, p4, p5)
1235 __DRIVER_MODULE(TARGETNAME, pci, hpt_pci_driver, hpt_devclass, NULL, NULL);
1236 __MODULE_VERSION(TARGETNAME, 1);
1237 __MODULE_DEPEND(TARGETNAME, cam, 1, 1, 1);
1239 typedef struct cdev * ioctl_dev_t;
1241 typedef struct thread * ioctl_thread_t;
1243 static int hpt_open(struct dev_open_args *ap)
1248 static int hpt_close(struct dev_close_args *ap)
1253 static int hpt_ioctl(struct dev_ioctl_args *ap)
1255 u_long cmd = ap->a_cmd;
1256 caddr_t data = ap->a_data;
1257 PHPT_IOCTL_PARAM piop=(PHPT_IOCTL_PARAM)data;
1258 IOCTL_ARG ioctl_args;
1259 HPT_U32 bytesReturned;
1262 case HPT_DO_IOCONTROL:
1264 if (piop->Magic == HPT_IOCTL_MAGIC || piop->Magic == HPT_IOCTL_MAGIC32) {
1265 KdPrint(("ioctl=%x in=%p len=%d out=%p len=%d\n",
1266 piop->dwIoControlCode,
1268 piop->nInBufferSize,
1270 piop->nOutBufferSize));
1272 memset(&ioctl_args, 0, sizeof(ioctl_args));
1274 ioctl_args.dwIoControlCode = piop->dwIoControlCode;
1275 ioctl_args.nInBufferSize = piop->nInBufferSize;
1276 ioctl_args.nOutBufferSize = piop->nOutBufferSize;
1277 ioctl_args.lpBytesReturned = &bytesReturned;
1279 if (ioctl_args.nInBufferSize) {
1280 ioctl_args.lpInBuffer = kmalloc(ioctl_args.nInBufferSize, M_DEVBUF, M_WAITOK);
1281 if (!ioctl_args.lpInBuffer)
1283 if (copyin((void*)piop->lpInBuffer,
1284 ioctl_args.lpInBuffer, piop->nInBufferSize))
1288 if (ioctl_args.nOutBufferSize) {
1289 ioctl_args.lpOutBuffer = kmalloc(ioctl_args.nOutBufferSize, M_DEVBUF, M_WAITOK);
1290 if (!ioctl_args.lpOutBuffer)
1296 hpt_do_ioctl(&ioctl_args);
1300 if (ioctl_args.result==HPT_IOCTL_RESULT_OK) {
1301 if (piop->nOutBufferSize) {
1302 if (copyout(ioctl_args.lpOutBuffer,
1303 (void*)piop->lpOutBuffer, piop->nOutBufferSize))
1306 if (piop->lpBytesReturned) {
1307 if (copyout(&bytesReturned,
1308 (void*)piop->lpBytesReturned, sizeof(HPT_U32)))
1311 if (ioctl_args.lpInBuffer) kfree(ioctl_args.lpInBuffer, M_DEVBUF);
1312 if (ioctl_args.lpOutBuffer) kfree(ioctl_args.lpOutBuffer, M_DEVBUF);
1316 if (ioctl_args.lpInBuffer) kfree(ioctl_args.lpInBuffer, M_DEVBUF);
1317 if (ioctl_args.lpOutBuffer) kfree(ioctl_args.lpOutBuffer, M_DEVBUF);
1325 return hpt_rescan_bus();
1328 KdPrint(("invalid command!"));
1334 static void hpt_rescan_callback(struct cam_periph *periph, union ccb *ccb)
1336 xpt_free_path(ccb->ccb_h.path);
1340 static int hpt_rescan_bus(void)
1348 ldm_for_each_vbus(vbus, vbus_ext) {
1349 if ((ccb = xpt_alloc_ccb()) == NULL)
1351 if (xpt_create_path(&ccb->ccb_h.path, xpt_periph,
1352 cam_sim_path(vbus_ext->sim),
1353 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
1358 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, 5/*priority (low)*/);
1359 ccb->ccb_h.func_code = XPT_SCAN_BUS;
1360 ccb->ccb_h.cbfcnp = hpt_rescan_callback;
1361 ccb->crcn.flags = CAM_FLAG_NONE;
1362 xpt_action(ccb); /* scan is now in progress */