1 /* $NetBSD: midwayvar.h,v 1.10 1997/03/20 21:34:46 chuck Exp $ */
5 * Copyright (c) 1996 Charles D. Cranor and Washington University.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by Charles D. Cranor and
19 * Washington University.
20 * 4. The name of the author may not be used to endorse or promote products
21 * derived from this software without specific prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
24 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
25 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
26 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 * m i d w a y v a r . h
38 * we define the en_softc here so that bus specific modules can allocate
39 * it as the first item in their softc. note that BSD-required
40 * "struct device" is in the mid_softc!
42 * author: Chuck Cranor <chuck@ccrc.wustl.edu>
46 * params needed to determine softc size
50 #define EN_NTX 8 /* number of tx bufs to use */
53 #define EN_TXSZ 32 /* trasmit buf size in KB */
56 #define EN_RXSZ 32 /* recv buf size in KB */
58 #define EN_MAXNRX ((2048-(EN_NTX*EN_TXSZ))/EN_RXSZ)
59 /* largest possible NRX (depends on RAM size) */
62 #if defined(__NetBSD__) || defined(__OpenBSD__) || defined(__bsdi__)
63 #define EN_INTR_TYPE int
64 #define EN_INTR_RET(X) return(X)
65 #if defined(__NetBSD__) || defined(__OpenBSD__)
66 #define EN_IOCTL_CMDT u_long
67 #elif defined(__bsdi__)
68 #define EN_IOCTL_CMDT int
71 #elif defined(__FreeBSD__)
73 #define EN_INTR_TYPE void
74 #define EN_INTR_RET(X) return
75 #define EN_IOCTL_CMDT u_long
78 char dv_xname[IFNAMSIZ];
99 struct device sc_dev; /* system device */
100 struct ifnet enif; /* network ifnet handle */
103 bus_space_tag_t en_memt; /* for EN_READ/EN_WRITE */
104 bus_space_handle_t en_base; /* base of en card */
105 bus_size_t en_obmemsz; /* size of en card (bytes) */
106 void (*en_busreset) __P((void *));
107 /* bus specific reset function */
110 u_int32_t hwslistp; /* hw pointer to service list (byte offset) */
111 u_int16_t swslist[MID_SL_N]; /* software service list (see en_service()) */
112 u_int16_t swsl_head, /* ends of swslist (index into swslist) */
114 u_int32_t swsl_size; /* # of items in swsl */
118 u_int32_t dtq[MID_DTQ_N]; /* sw copy of dma q (see ENIDQ macros) */
119 u_int32_t dtq_free; /* # of dtq's free */
120 u_int32_t dtq_us; /* software copy of our pointer (byte offset) */
121 u_int32_t dtq_chip; /* chip's pointer (byte offset) */
122 u_int32_t need_dtqs; /* true if we ran out of DTQs */
125 u_int32_t drq[MID_DRQ_N]; /* sw copy of dma q (see ENIDQ macros) */
126 u_int32_t drq_free; /* # of drq's free */
127 u_int32_t drq_us; /* software copy of our pointer (byte offset) */
128 u_int32_t drq_chip; /* chip's pointer (byte offset) */
129 u_int32_t need_drqs; /* true if we ran out of DRQs */
131 /* xmit buf ctrl. (per channel) */
133 u_int32_t mbsize; /* # mbuf bytes we are using (max=TXHIWAT) */
134 u_int32_t bfree; /* # free bytes in buffer (not dma or xmit) */
135 u_int32_t start, stop; /* ends of buffer area (byte offset) */
136 u_int32_t cur; /* next free area (byte offset) */
137 u_int32_t nref; /* # of VCs using this channel */
138 struct ifqueue indma; /* mbufs being dma'd now */
139 struct ifqueue q; /* mbufs waiting for dma now */
140 } txslot[MID_NTX_CH];
142 /* xmit vc ctrl. (per vc) */
143 u_int8_t txspeed[MID_N_VC]; /* speed of tx on a VC */
144 u_int8_t txvc2slot[MID_N_VC]; /* map VC to slot */
146 /* recv vc ctrl. (per vc). maps VC number to recv slot */
147 u_int16_t rxvc2slot[MID_N_VC];
148 int en_nrx; /* # of active rx slots */
150 /* recv buf ctrl. (per recv slot) */
152 void *rxhand; /* recv. handle if doing direct delivery */
153 u_int32_t mode; /* saved copy of mode info */
154 u_int32_t start, stop; /* ends of my buffer area */
155 u_int32_t cur; /* where I am at */
156 u_int16_t atm_vci; /* backpointer to VCI */
157 u_int8_t atm_flags; /* copy of atm_flags from atm_ph */
158 u_int8_t oth_flags; /* other flags */
159 u_int32_t raw_threshold; /* for raw mode */
160 struct ifqueue indma; /* mbufs being dma'd now */
161 struct ifqueue q; /* mbufs waiting for dma now */
162 } rxslot[EN_MAXNRX]; /* recv info */
164 u_int8_t macaddr[6]; /* card unique mac address */
167 u_int32_t vtrash; /* sw copy of counter */
168 u_int32_t otrash; /* sw copy of counter */
169 u_int32_t ttrash; /* # of RBD's with T bit set */
170 u_int32_t mfix; /* # of times we had to call mfix */
171 u_int32_t mfixfail; /* # of times mfix failed */
172 u_int32_t headbyte; /* # of times we used BYTE DMA at front */
173 u_int32_t tailbyte; /* # of times we used BYTE DMA at end */
174 u_int32_t tailflush; /* # of times we had to FLUSH out DMA bytes */
175 u_int32_t txmbovr; /* # of times we dropped due to mbsize */
176 u_int32_t dmaovr; /* tx dma overflow count */
177 u_int32_t txoutspace; /* out of space in xmit buffer */
178 u_int32_t txdtqout; /* out of DTQs */
179 u_int32_t launch; /* total # of launches */
180 u_int32_t lheader; /* # of launches without OB header */
181 u_int32_t ltail; /* # of launches without OB tail */
182 u_int32_t hwpull; /* # of pulls off hardware service list */
183 u_int32_t swadd; /* # of pushes on sw service list */
184 u_int32_t rxqnotus; /* # of times we pull from rx q, but fail */
185 u_int32_t rxqus; /* # of good pulls from rx q */
186 u_int32_t rxoutboth; /* # of times out of mbufs and DRQs */
187 u_int32_t rxdrqout; /* # of times out of DRQs */
188 u_int32_t rxmbufout; /* # of time out of mbufs */
191 u_int32_t ipl; /* sbus interrupt lvl (1 on pci?) */
192 u_int8_t bestburstcode; /* code of best burst we can use */
193 u_int8_t bestburstlen; /* length of best burst (bytes) */
194 u_int8_t bestburstshift; /* (x >> shift) == (x / bestburstlen) */
195 u_int8_t bestburstmask; /* bits to check if not multiple of burst */
196 u_int8_t alburst; /* align dma bursts? */
197 u_int8_t is_adaptec; /* adaptec version of midway? */
204 void en_attach __P((struct en_softc *));
205 EN_INTR_TYPE en_intr __P((void *));
206 void en_reset __P((struct en_softc *));