- Nuke #ifdef SCOPEDROUTING. It was never enabled and is useless now[1].
[dragonfly.git] / contrib / gdb / configure
1 #!/bin/sh
2
3 ### WARNING: this file contains embedded tabs.  Do not run untabify on this file.
4
5 # Configuration script
6 # Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 1997
7 # Free Software Foundation, Inc.
8
9 # This program is free software; you can redistribute it and/or modify
10 # it under the terms of the GNU General Public License as published by
11 # the Free Software Foundation; either version 2 of the License, or
12 # (at your option) any later version.
13
14 # This program is distributed in the hope that it will be useful,
15 # but WITHOUT ANY WARRANTY; without even the implied warranty of
16 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 # GNU General Public License for more details.
18
19 # You should have received a copy of the GNU General Public License
20 # along with this program; if not, write to the Free Software
21 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
22
23 # This file was originally written by K. Richard Pixley.
24
25 #
26 # Shell script to create proper links to machine-dependent files in
27 # preparation for compilation.
28 #
29 # If configure succeeds, it leaves its status in config.status.
30 # If configure fails after disturbing the status quo, 
31 #       config.status is removed.
32 #
33
34 export PATH || (echo "OOPS, this isn't sh.  Desperation time.  I will feed myself to sh."; sh $0 $argv; kill $$)
35
36 remove=rm
37 hard_link=ln
38 symbolic_link='ln -s'
39
40 #for Test
41 #remove="echo rm"
42 #hard_link="echo ln"
43 #symbolic_link="echo ln -s"
44
45 # clear some things potentially inherited from environment.
46
47 Makefile=Makefile
48 Makefile_in=Makefile.in
49 arguments=
50 build_alias=
51 cache_file=config.cache
52 cache_file_option=
53 configdirs=
54 extraconfigdirs=
55 diroptions=
56 exec_prefix=
57 exec_prefixoption=
58 fatal=
59 floating_point=default
60 gas=default
61 gcc_version=
62 gcc_version_trigger=
63 host_alias=NOHOST
64 host_makefile_frag=
65 moveifchange=
66 norecursion=
67 other_options=
68 package_makefile_frag=
69 package_makefile_rules_frag=
70 prefix=/usr/local
71 progname=
72 program_prefix=
73 program_prefixoption=
74 program_suffix=
75 program_suffixoption=
76 program_transform_name=
77 program_transform_nameoption=
78 redirect=
79 removing=
80 site=
81 site_makefile_frag=
82 site_option=
83 srcdir=
84 srctrigger=
85 subdirs=
86 target_alias=NOTARGET
87 target_makefile_frag=
88 undefs=NOUNDEFS
89 version="$Revision: 1.270 $"
90 x11=default
91 bindir='${exec_prefix}/bin'
92 sbindir='${exec_prefix}/sbin'
93 libexecdir='${exec_prefix}/libexec'
94 datadir='${prefix}/share'
95 sysconfdir='${prefix}/etc'
96 sharedstatedir='${prefix}/com'
97 localstatedir='${prefix}/var'
98 libdir='${exec_prefix}/lib'
99 includedir='${prefix}/include'
100 oldincludedir='/usr/include'
101 infodir='${prefix}/info'
102 mandir='${prefix}/man'
103
104 ### we might need to use some other shell than /bin/sh for running subshells
105
106 ### If we are on Windows, search for the shell.  This will permit people
107 ### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
108 ### without also having to set CONFIG_SHELL.  This code will work when
109 ### using bash, which sets OSTYPE.
110 case "${OSTYPE}" in
111 *win32*)
112   if [ x${CONFIG_SHELL} = x ]; then
113     if [ ! -f /bin/sh ]; then
114       if [ x${SHELL} != x ] && [ -f ${SHELL} ]; then
115         CONFIG_SHELL=${SHELL}
116         export CONFIG_SHELL
117       else
118         for prog in sh sh.exe bash bash.exe; do
119           IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}:"
120           for dir in $PATH; do
121             test -z "$dir" && dir=.
122             if test -f $dir/$prog; then
123               CONFIG_SHELL=$dir/$prog
124               export CONFIG_SHELL
125               break
126             fi
127           done
128           IFS="$save_ifs"
129           test -n "${CONFIG_SHELL}" && break
130         done
131       fi
132     fi
133   fi
134   ;;
135 esac
136
137 config_shell=${CONFIG_SHELL-/bin/sh}
138
139 NO_EDIT="This file was generated automatically by configure.  Do not edit."
140
141 ## this is a little touchy and won't always work, but...
142 ##
143 ## if the argv[0] starts with a slash then it is an absolute name that can (and
144 ## must) be used as is.
145 ##
146 ## otherwise, if argv[0] has no slash in it, we can assume that it is on the
147 ## path.  Since PATH might include "." we also add `pwd` to the end of PATH.
148 ##
149
150 progname=$0
151 # if PWD already has a value, it is probably wrong.
152 if [ -n "$PWD" ]; then PWD=`pwd`; fi
153
154 case "${progname}" in
155 /*) ;;
156 */*) ;;
157 *)
158         PATH=$PATH:${PWD=`pwd`} ; export PATH
159         ;;
160 esac
161
162 # Loop over all args
163
164 while :
165 do
166
167 # Break out if there are no more args
168         case $# in
169         0)
170                 break
171                 ;;
172         esac
173
174 # Get the first arg, and shuffle
175         option=$1
176         shift
177
178 # Make all options have two hyphens
179         orig_option=$option     # Save original for error messages
180         case $option in
181         --*) ;;
182         -*) option=-$option ;;
183         esac
184                 
185 # Split out the argument for options that take them
186         case $option in
187         --*=*)
188                 optarg=`echo $option | sed -e 's/^[^=]*=//'`
189                 arguments="$arguments $option"
190                 ;;
191 # These options have mandatory values.  Since we didn't find an = sign,
192 # the value must be in the next argument
193         --bu* | --cache* | --ex* | --ho* | --pre* | --program-p* | --program-s* | --program-t* | --si* | --sr* | --ta* | --tm* | --x-* | --bi* | --sb* | --li* | --da* | --sy* | --sh* | --lo* | --in* | --ol* | --ma*)
194                 optarg=$1
195                 shift
196                 arguments="$arguments $option=$optarg"
197                 ;;
198         --v)
199                 arguments="$arguments -v"
200                 ;;
201         --*)
202                 arguments="$arguments $option"
203                 ;;
204         esac
205
206 # Now, process the options
207         case $option in
208
209         --bi*)
210                 bindir=$optarg
211                 diroptions="$diroptions --bindir=$optarg"
212                 ;;
213         --build* | --bu*)
214                 case "$build_alias" in
215                 "") build_alias=$optarg ;;
216                 *) echo '***' Can only configure for one build machine at a time.  1>&2
217                    fatal=yes
218                    ;;
219                 esac
220                 ;;
221         --cache*)
222                 cache_file=$optarg
223                 ;;
224         --da*)
225                 datadir=$optarg
226                 diroptions="$diroptions --datadir=$optarg"
227                 ;;
228         --disable-*)
229                 enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
230                 eval $enableopt=no
231                 disableoptions="$disableoptions $option"
232                 ;;
233         --enable-*)
234                 case "$option" in
235                 *=*)    ;;
236                 *)      optarg=yes ;;
237                 esac
238
239                 enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
240                 eval "$enableopt='$optarg'"
241                 enableoptions="$enableoptions '$option'"
242                 ;;
243         --exec-prefix* | --ex*)
244                 exec_prefix=$optarg
245                 exec_prefixoption="--exec-prefix=$optarg"
246                 ;;
247         --gas | --g*)
248                 gas=yes
249                 ;;
250         --help | --he*)
251                 fatal=yes
252                 ;;
253         --host* | --ho*)
254                 case $host_alias in
255                 NOHOST) host_alias=$optarg ;;
256                 *) echo '***' Can only configure for one host at a time.  1>&2
257                    fatal=yes
258                    ;;
259                 esac
260                 ;;
261         --inc*)
262                 includedir=$optarg
263                 diroptions="$diroptions --includedir=$optarg"
264                 ;;
265         --inf*)
266                 infodir=$optarg
267                 diroptions="$diroptions --infodir=$optarg"
268                 ;;
269         --libd*)
270                 libdir=$optarg
271                 diroptions="$diroptions --libdir=$optarg"
272                 ;;
273         --libe*)
274                 libexecdir=$optarg
275                 diroptions="$diroptions --libexecdir=$optarg"
276                 ;;
277         --lo*)
278                 localstatedir=$optarg
279                 diroptions="$diroptions --localstatedir=$optarg"
280                 ;;
281         --ma*)
282                 mandir=$optarg
283                 diroptions="$diroptions --mandir=$optarg"
284                 ;;
285         --nfp | --nf*)
286                 floating_point=no
287                 floating_pointoption="--nfp"
288                 ;;
289         --norecursion | --no*)
290                 norecursion=yes
291                 ;;
292         --ol*)
293                 oldincludedir=$optarg
294                 diroptions="$diroptions --oldincludedir=$optarg"
295                 ;;
296         --prefix* | --pre*)
297                 prefix=$optarg
298                 prefixoption="--prefix=$optarg"
299                 ;;
300         --program-prefix* | --program-p*)
301                 program_prefix=$optarg
302                 program_prefixoption="--program-prefix=$optarg"
303                 ;;
304         --program-suffix* | --program-s*)
305                 program_suffix=$optarg
306                 program_suffixoption="--program-suffix=$optarg"
307                 ;;
308         --program-transform-name* | --program-t*)
309                 # Double any backslashes or dollar signs in the argument
310                 program_transform_name="${program_transform_name} -e `echo ${optarg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
311                 program_transform_nameoption="${program_transform_nameoption} --program-transform-name='$optarg'"
312                 ;;
313         --rm)
314                 removing=--rm
315                 ;;
316         --sb*)
317                 sbindir=$optarg
318                 diroptions="$diroptions --sbindir=$optarg"
319                 ;;
320         --sh*)
321                 sharedstatedir=$optarg
322                 diroptions="$diroptions --sharedstatedir=$optarg"
323                 ;;
324         --silent | --sil* | --quiet | --q*)
325                 redirect=">/dev/null"
326                 verbose=--silent
327                 ;;
328         --site* | --sit*)
329                 site=$optarg
330                 site_option="--site=$optarg"
331                 ;;
332         --srcdir*/ | --sr*/)
333                 # Remove trailing slashes.  Otherwise, when the file name gets
334                 # bolted into an object file as debug info, it has two slashes
335                 # in it.  Ordinarily this is ok, but emacs takes double slash
336                 # to mean "forget the first part".
337                 srcdir=`echo $optarg | sed -e 's:/$::'`
338                 ;;
339         --srcdir* | --sr*)
340                 srcdir=$optarg
341                 ;;
342         --sy*)
343                 sysconfdir=$optarg
344                 diroptions="$diroptions --sysconfdir=$optarg"
345                 ;;
346         --target* | --ta*)
347                 case $target_alias in
348                 NOTARGET) target_alias=$optarg ;;
349                 *) echo '***' Can only configure for one target at a time.  1>&2
350                    fatal=yes
351                    ;;
352                 esac
353                 ;;
354         --tmpdir* | --tm*)
355                 TMPDIR=$optarg
356                 tmpdiroption="--tmpdir=$optarg"
357                 ;;
358         --verbose | --v | --verb*)
359                 redirect=
360                 verbose=--verbose
361                 ;;
362         --version | --V | --vers*)
363                 echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'`
364                 exit 0
365                 ;;
366         --with-*)
367                 case "$option" in
368                 *=*)    ;;
369                 *)      optarg=yes ;;
370                 esac
371
372                 withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
373                 eval $withopt="$optarg"
374                 withoptions="$withoptions $option"
375                 ;;
376         --without-*)
377                 withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
378                 eval $withopt=no
379                 withoutoptions="$withoutoptions $option"
380                 ;;
381         --x)    with_x=yes
382                 withoptions="$withoptions --with-x"
383                 ;;
384         --x-i* | --x-l*) other_options="$other_options $orig_option"
385                 ;;
386         --*)
387                 echo "configure: Unrecognized option: \"$orig_option\"; use --help for usage." >&2
388                 exit 1
389                 ;;
390         *)
391                 case $undefs in
392                 NOUNDEFS) undefs=$option ;;
393                 *) echo '***' Can only configure for one host and one target at a time.  1>&2
394                    fatal=yes
395                    ;;
396                 esac
397                 ;;
398         esac
399 done
400
401 # process host and target
402
403 # Do some error checking and defaulting for the host and target type.
404 # The inputs are:
405 #    configure --host=HOST --target=TARGET UNDEFS
406 #
407 # The rules are:
408 # 1. You aren't allowed to specify --host, --target, and undefs at the
409 #    same time.
410 # 2. Host defaults to undefs.
411 # 3. If undefs is not specified, then host defaults to the current host,
412 #    as determined by config.guess.
413 # 4. Target defaults to undefs.
414 # 5. If undefs is not specified, then target defaults to host.
415
416 case "${fatal}" in
417 "")
418         # Make sure that host, target & undefs aren't all specified at the
419         # same time.
420         case $host_alias---$target_alias---$undefs in
421         NOHOST---*---* | *---NOTARGET---* | *---*---NOUNDEFS)
422                 ;;
423         *) echo '***' Can only configure for one host and one target at a time.  1>&2
424            fatal=yes
425            break 2
426                 ;;
427         esac
428
429         # Now, do defaulting for host.
430         case $host_alias in
431         NOHOST)
432                 case $undefs in
433                 NOUNDEFS)
434                         # Neither --host option nor undefs were present.
435                         # Call config.guess.
436                         guesssys=`echo ${progname} | sed 's/configure$/config.guess/'`
437                         if host_alias=`${config_shell} ${guesssys}`
438                         then
439                                 # If the string we are going to use for
440                                 # the target is a prefix of the string
441                                 # we just guessed for the host, then
442                                 # assume we are running native, and force
443                                 # the same string for both target and host.
444                                 case $target_alias in
445                                 NOTARGET) ;;
446                                 *)
447                                         if expr $host_alias : $target_alias >/dev/null
448                                         then
449                                                 host_alias=$target_alias
450                                         fi
451                                         ;;
452                                 esac
453                                 echo "Configuring for a ${host_alias} host." 1>&2
454                                 arguments="--host=$host_alias $arguments"
455                         else
456                                 echo 'Config.guess failed to determine the host type.  You need to specify one.' 1>&2
457                                 fatal=yes
458                         fi
459                         ;;
460                 *)
461                         host_alias=$undefs
462                         arguments="--host=$host_alias $arguments"
463                         undefs=NOUNDEFS
464                         ;;
465                 esac
466         esac
467
468         # Do defaulting for target.  If --target option isn't present, default
469         # to undefs.  If undefs isn't present, default to host.
470         case $target_alias in
471         NOTARGET)
472                 case $undefs in
473                 NOUNDEFS)
474                         target_alias=$host_alias
475                         ;;
476                 *)
477                         target_alias=$undefs
478                         arguments="--target=$target_alias $arguments"
479                         ;;
480                 esac
481         esac
482         ;;
483 *) ;;
484 esac
485
486 if [ -n "${fatal}" -o "${host_alias}" = "help" ] ; then
487         exec 1>&2
488         echo Usage: configure [OPTIONS] [HOST]
489         echo
490         echo Options: [defaults in brackets]
491         echo ' --prefix=MYDIR            install into MYDIR [/usr/local]'
492         echo ' --exec-prefix=MYDIR       install host-dependent files into MYDIR [/usr/local]'
493         echo ' --help                    print this message [normal config]'
494         echo ' --build=BUILD             configure for building on BUILD [BUILD=HOST]'
495         echo ' --host=HOST               configure for HOST [determined via config.guess]'
496         echo ' --norecursion             configure this directory only [recurse]'
497         echo ' --program-prefix=FOO      prepend FOO to installed program names [""]'
498         echo ' --program-suffix=FOO      append FOO to installed program names [""]'
499         echo ' --program-transform-name=P transform installed names by sed pattern P [""]'
500         echo ' --site=SITE               configure with site-specific makefile for SITE'
501         echo ' --srcdir=DIR              find the sources in DIR [. or ..]'
502         echo ' --target=TARGET   configure for TARGET [TARGET=HOST]'
503         echo ' --tmpdir=TMPDIR   create temporary files in TMPDIR [/tmp]'
504         echo ' --nfp                     configure for software floating point [hard float]'
505         echo ' --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)'
506         echo ' --without-FOO             package FOO is NOT available'
507         echo ' --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)'
508         echo ' --disable-FOO             do not include feature FOO'
509         echo
510         echo 'Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.'
511         echo
512         if [ -r config.status ] ; then
513                 cat config.status
514         fi
515
516         exit 1
517 fi
518
519 configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
520 moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
521 topsrcdir=`cd \`dirname ${progname}\`; pwd`
522
523
524 # this is a hack.  sun4 must always be a valid host alias or this will fail.
525 if ${config_shell} ${configsub} sun4 >/dev/null 2>&1 ; then
526         true
527 else
528         echo '***' cannot find config.sub.  1>&2
529         exit 1
530 fi
531
532 touch config.junk
533 if ${config_shell} ${moveifchange} config.junk config.trash ; then
534         true
535 else
536         echo '***' cannot find move-if-change.  1>&2
537         exit 1
538 fi
539 rm -f config.junk config.trash
540
541 case "${srcdir}" in
542 "")
543         if [ -r configure.in ] ; then
544                 srcdir=.
545         else
546                 if [ -r ${progname}.in ] ; then
547                         srcdir=`echo ${progname} | sed 's:/configure$::'`
548                 else
549                         echo '***' "Can't find configure.in.  Try using --srcdir=some_dir"  1>&2
550                         exit 1
551                 fi
552         fi
553         ;;
554 *)
555         # Set srcdir to "." if that's what it is.
556         # This is important for multilib support.
557         if [ ! -d ${srcdir} ] ; then
558                 echo "Invalid source directory ${srcdir}" >&2
559                 exit 1
560         fi
561         pwd=`pwd`
562         srcpwd=`cd ${srcdir} ; pwd`
563         if [ "${pwd}" = "${srcpwd}" ] ; then
564                 srcdir=.
565         fi
566 esac
567
568 ### warn about some conflicting configurations.
569
570 case "${srcdir}" in
571 ".") ;;
572 *)
573         if [ -f ${srcdir}/config.status ] ; then
574                 echo '***' Cannot configure here in \"${PWD=`pwd`}\" when \"${srcdir}\" is currently configured. 1>&2
575                 exit 1
576         fi
577 esac
578
579
580 # default exec_prefix
581 case "${exec_prefixoption}" in
582 "") exec_prefix="\$(prefix)" ;;
583 *) ;;
584 esac
585
586 # Define the trigger file to make sure configure will re-run whenever
587 # the gcc version number changes.
588 if [ "${with_gcc_version_trigger+set}" = set ]; then
589     gcc_version_trigger="$with_gcc_version_trigger"
590     gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${with_gcc_version_trigger}`
591 else
592     # If gcc's sources are available, define the trigger file.
593     if [ -f ${topsrcdir}/gcc/version.c ] ; then
594         gcc_version_trigger=${topsrcdir}/gcc/version.c
595         gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${gcc_version_trigger}`
596         case "$arguments" in
597           *--with-gcc-version-trigger=$gcc_version_trigger* )
598             ;;
599           * )
600             # Make sure configure.in knows about this.
601             arguments="--with-gcc-version-trigger=$gcc_version_trigger $arguments"
602             ;;
603         esac
604         withoptions="--with-gcc-version-trigger=$gcc_version_trigger $withoptions"
605     fi
606 fi
607
608 ### break up ${srcdir}/configure.in.
609 case "`grep '^# per\-host:' ${srcdir}/configure.in`" in
610 "")
611         echo '***' ${srcdir}/configure.in has no \"per-host:\" line. 1>&2
612         # Check for a directory that's been converted to use autoconf since
613         # it was last configured.
614         if grep AC_OUTPUT ${srcdir}/configure.in >/dev/null ; then
615           echo '***' Hmm, looks like this directory has been autoconfiscated. 1>&2
616           if [ -r ${srcdir}/configure ] ; then
617             echo '***' Running the local configure script. 1>&2
618             case "${cache_file}" in
619             "") cache_file_option= ;;
620             *)  cache_file_option="--cache-file=${cache_file}" ;;
621             esac
622             srcdiroption="--srcdir=${srcdir}"
623             case "${build_alias}" in
624             "") buildopt= ;;
625             *)  buildopt="--build=${build_alias}" ;;
626             esac
627             eval exec ${config_shell} ${srcdir}/configure ${verbose} \
628                 ${buildopt} --host=${host_alias} --target=${target_alias} \
629                 ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
630                 ${srcdiroption} ${diroptions} \
631                 ${program_prefixoption} ${program_suffixoption} \
632                 ${program_transform_nameoption} ${site_option} \
633                 ${withoptions} ${withoutoptions} \
634                 ${enableoptions} ${disableoptions} ${floating_pointoption} \
635                 ${cache_file_option} ${removing} ${other_options} ${redirect}
636           else
637             echo '***' There is no configure script present though. 1>&2
638           fi
639         fi
640         exit 1
641         ;;
642 *) ;;
643 esac
644
645 case "`grep '^# per\-target:' ${srcdir}/configure.in`" in
646 "")
647         echo '***' ${srcdir}/configure.in has no \"per-target:\" line. 1>&2
648         exit 1
649         ;;
650 *) ;;
651 esac
652
653 case "${TMPDIR}" in
654 "") TMPDIR=/tmp ; export TMPDIR ;;
655 *) ;;
656 esac
657
658 # keep this filename short for &%*%$*# 14 char file names
659 tmpfile=${TMPDIR}/cONf$$
660 # Note that under many versions of sh a trap handler for 0 will *override* any
661 # exit status you explicitly specify!  At this point, the only non-error exit
662 # is at the end of the script; these actions are duplicated there, minus
663 # the "exit 1".  Don't use "exit 0" anywhere after this without resetting the
664 # trap handler, or you'll lose.
665 trap "rm -f Makefile.tem ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos; exit 1" 0 1 2 15
666
667 # split ${srcdir}/configure.in into common, per-host, per-target,
668 # and post-target parts.  Post-target is optional.
669 sed -e '/^# per\-host:/,$d' ${srcdir}/configure.in > ${tmpfile}.com
670 sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.hst
671 if grep '^# post-target:' ${srcdir}/configure.in >/dev/null ; then
672   sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.tgt
673   sed -e '1,/^# post\-target:/d' ${srcdir}/configure.in > ${tmpfile}.pos
674 else
675   sed -e '1,/^# per\-target:/d' ${srcdir}/configure.in > ${tmpfile}.tgt
676   echo >${tmpfile}.pos
677 fi
678
679 ### do common part of configure.in
680
681 # If the language specific compiler does not exist, but the "gcc" directory does,
682 # we will skip this directory; in this case the sub-directory's common part
683 # of configure.in will create a small shell script "skip-this-dir" containing
684 # commands to completely clean up any temporary or created files.
685
686 . ${tmpfile}.com
687
688 if test -f skip-this-dir; then
689         # Perform the same cleanup as the trap handler, minus the "exit 1" of course,
690         # and reset the trap handler.
691         trap 0
692         rm -f Makefile* ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos
693         # Execute the final clean-up actions
694         ${config_shell} skip-this-dir
695         # and stop configuring this directory.
696         exit 0
697 fi
698
699 # some sanity checks on configure.in
700 case "${srctrigger}" in
701 "")
702         echo '***' srctrigger not set in ${PWD=`pwd`}/configure.in.  1>&2
703         exit 1
704         ;;
705 *) ;;
706 esac
707
708 case "${build_alias}" in
709 "")
710         if result=`${config_shell} ${configsub} ${host_alias}` ; then
711             build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
712             build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
713             build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
714             build=${build_cpu}-${build_vendor}-${build_os}
715             build_alias=${host_alias}
716         fi
717         ;;
718 *)
719         if result=`${config_shell} ${configsub} ${build_alias}` ; then
720             buildopt="--build=${build_alias}"
721             build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
722             build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
723             build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
724             build=${build_cpu}-${build_vendor}-${build_os}
725         else
726             echo "Unrecognized build system name ${build_alias}." 1>&2
727             exit 1
728         fi
729         ;;
730 esac
731
732 if result=`${config_shell} ${configsub} ${host_alias}` ; then
733     true
734 else
735     echo "Unrecognized host system name ${host_alias}." 1>&2
736     exit 1
737 fi
738 host_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
739 host_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
740 host_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
741 host=${host_cpu}-${host_vendor}-${host_os}
742
743 . ${tmpfile}.hst
744
745 if result=`${config_shell} ${configsub} ${target_alias}` ; then
746     true
747 else
748     echo "Unrecognized target system name ${target_alias}." 1>&2
749     exit 1
750 fi
751 target_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
752 target_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
753 target_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
754 target=${target_cpu}-${target_vendor}-${target_os}
755
756 . ${tmpfile}.tgt
757
758 # Find the source files, if location was not specified.
759 case "${srcdir}" in
760 "")
761         srcdirdefaulted=1
762         srcdir=.
763         if [ ! -r ${srctrigger} ] ; then
764                 srcdir=..
765         fi
766         ;;
767 *) ;;
768 esac
769
770 if [ ! -r ${srcdir}/${srctrigger} ] ; then
771         case "${srcdirdefaulted}" in
772         "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/${srcdir}" 1>&2 ;;
773         *)  echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/. or ${PWD=`pwd`}/.." 1>&2 ;;
774         esac
775
776         echo '***' \(At least ${srctrigger} is missing.\) 1>&2
777         exit 1
778 fi
779
780 # Some systems (e.g., one of the i386-aix systems the gas testers are
781 # using) don't handle "\$" correctly, so don't use it here.
782 tooldir='$(exec_prefix)'/${target_alias}
783
784 if [ "${host_alias}" != "${target_alias}" ] ; then
785     if [ "${program_prefixoption}" = "" ] ; then
786         if [ "${program_suffixoption}" = "" ] ; then 
787             if [ "${program_transform_nameoption}" = "" ] ; then
788                 program_prefix=${target_alias}- ;
789             fi
790         fi
791     fi
792 fi
793
794 # Merge program_prefix and program_suffix onto program_transform_name.
795 # (program_suffix used to use $, but it's hard to preserve $ through both
796 # make and sh.)
797 if [ "${program_suffix}" != "" ] ; then
798     program_transform_name="-e s,\\\\(.*\\\\),\\\\1${program_suffix}, ${program_transform_name}"
799 fi
800
801 if [ "${program_prefix}" != "" ] ; then
802     program_transform_name="-e s,^,${program_prefix}, ${program_transform_name}"
803 fi
804
805 # If CC and CXX are not set in the environment, and the Makefile
806 # exists, try to extract them from it.  This is to handle running
807 # ./config.status by hand.
808 if [ -z "${CC}" ] && [ -r Makefile ]; then
809   sed -n -e ':loop
810 /\\$/ N
811 s/\\\n//g
812 t loop
813 /^CC[   ]*=/ s/CC[      ]*=[    ]*\(.*\)/\1/p' < Makefile > Makefile.cc
814   CC=`tail -1 Makefile.cc`
815   rm -f Makefile.cc
816 fi
817
818 if [ -z "${CFLAGS}" ] && [ -r Makefile ]; then
819   sed -n -e ':loop
820 /\\$/ N
821 s/\\\n//g
822 t loop
823 /^CFLAGS[       ]*=/ s/CFLAGS[  ]*=[    ]*\(.*\)/\1/p' < Makefile > Makefile.cc
824   CFLAGS=`tail -1 Makefile.cc`
825   rm -f Makefile.cc
826 fi
827
828 if [ -z "${CXX}" ] && [ -r Makefile ]; then
829   sed -n -e ':loop
830 /\\$/ N
831 s/\\\n//g
832 t loop
833 /^CXX[  ]*=/ s/CXX[     ]*=[    ]*\(.*\)/\1/p' < Makefile > Makefile.cc
834   CXX=`tail -1 Makefile.cc`
835   rm -f Makefile.cc
836 fi
837
838 if [ -z "${CXXFLAGS}" ] && [ -r Makefile ]; then
839   sed -n -e ':loop
840 /\\$/ N
841 s/\\\n//g
842 t loop
843 /^CXXFLAGS[     ]*=/ s/CXXFLAGS[        ]*=[    ]*\(.*\)/\1/p' < Makefile > Makefile.cc
844   CXXFLAGS=`tail -1 Makefile.cc`
845   rm -f Makefile.cc
846 fi
847
848 # Generate a default definition for YACC.  This is used if the makefile can't
849 # locate bison or byacc in objdir.
850
851 for prog in 'bison -y' byacc yacc
852 do
853   set dummy $prog; tmp=$2
854   IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}:"
855   for dir in $PATH; do
856     test -z "$dir" && dir=.
857     if test -f $dir/$tmp; then
858       DEFAULT_YACC="$prog"
859       break
860     fi
861   done
862   IFS="$save_ifs"
863
864   test -n "$DEFAULT_YACC" && break
865 done
866
867 # Generate a default definition for M4.  This is used if the makefile can't
868 # locate m4 in objdir.
869
870 for prog in gm4 gnum4 m4
871 do
872   set dummy $prog; tmp=$2
873   IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}:"
874   for dir in $PATH; do
875     test -z "$dir" && dir=.
876     if test -f $dir/$tmp; then
877       DEFAULT_M4="$prog"
878       break
879     fi
880   done
881   IFS="$save_ifs"
882
883   test -n "$DEFAULT_M4" && break
884 done
885
886 # Generate a default definition for LEX.  This is used if the makefile can't
887 # locate flex in objdir.
888
889 for prog in flex lex
890 do
891   set dummy $prog; tmp=$2
892   IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}:"
893   for dir in $PATH; do
894     test -z "$dir" && dir=.
895     if test -f $dir/$tmp; then
896       DEFAULT_LEX="$prog"
897       break
898     fi
899   done
900   IFS="$save_ifs"
901
902   test -n "$DEFAULT_LEX" && break
903 done
904
905 if [ "${build}" != "${host}" ]; then
906   # If we are doing a Canadian Cross, in which the host and build systems
907   # are not the same, we set reasonable default values for the tools.
908
909   tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
910   tools="${tools} CC_FOR_TARGET CXX_FOR_TARGET"
911   tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET HOST_PREFIX"
912   tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
913   tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET"
914   tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
915
916   for var in ${tools}; do
917     if [ -z "`eval 'echo $'"${var}"`" ] && [ -r Makefile ]; then
918       sed -n -e ':loop
919 /\\$/ N
920 s/\\\n//g
921 t loop
922 /^'"${var}"'[   ]*=/ s/'"${var}"'[      ]*=[    ]*\(.*\)/\1/p' \
923         < Makefile > Makefile.v
924       t=`tail -1 Makefile.v`
925       if [ -n "${t}" ]; then
926         eval "${var}='${t}'"
927       fi
928       rm -f Makefile.v
929     fi
930   done
931
932   AR=${AR-${host_alias}-ar}
933   AR_FOR_TARGET=${AR_FOR_TARGET-${target_alias}-ar}
934   AS=${AS-${host_alias}-as}
935   AS_FOR_TARGET=${AS_FOR_TARGET-${target_alias}-as}
936   BISON=${BISON-bison}
937   CC=${CC-${host_alias}-gcc}
938   CFLAGS=${CFLAGS-"-g -O2"}
939   CXX=${CXX-${host_alias}-c++}
940   CXXFLAGS=${CXXFLAGS-"-g -O2"}
941   CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
942   CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
943   CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
944   DLLTOOL=${DLLTOOL-${host_alias}-dlltool}
945   DLLTOOL_FOR_TARGET=${DLLTOOL_FOR_TARGET-${target_alias}-dlltool}
946   GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
947   HOST_PREFIX=${build_alias}-
948   HOST_PREFIX_1=${build_alias}-
949   LD=${LD-${host_alias}-ld}
950   LD_FOR_TARGET=${LD_FOR_TARGET-${target_alias}-ld}
951   MAKEINFO=${MAKEINFO-makeinfo}
952   NM=${NM-${host_alias}-nm}
953   NM_FOR_TARGET=${NM_FOR_TARGET-${target_alias}-nm}
954   RANLIB=${RANLIB-${host_alias}-ranlib}
955   RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib}
956   WINDRES=${WINDRES-${host_alias}-windres}
957   WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres}
958
959   if [ -z "${YACC}" ]; then
960     IFS="${IFS=         }"; save_ifs="$IFS"; IFS="${IFS}:"
961     for dir in $PATH; do
962       test -z "$dir" && dir=.
963       if test -f $dir/bison; then
964         YACC="bison -y"
965         break
966       fi
967       if test -f $dir/byacc; then
968         YACC=byacc
969         break
970       fi
971       if test -f $dir/yacc; then
972         YACC=yacc
973         break
974       fi
975     done
976     IFS="$save_ifs"
977     if [ -z "${YACC}" ]; then
978       YACC="bison -y"
979     fi
980   fi
981
982   if [ -z "${LEX}" ]; then
983     IFS="${IFS=         }"; save_ifs="$IFS"; IFS="${IFS}:"
984     for dir in $PATH; do
985       test -z "$dir" && dir=.
986       if test -f $dir/flex; then
987         LEX=flex
988         break
989       fi
990       if test -f $dir/lex; then
991         LEX=lex
992         break
993       fi
994     done
995     IFS="$save_ifs"
996     LEX=${LEX-flex}
997   fi
998
999   # Export variables which autoconf might try to set.
1000   export AS
1001   export AR
1002   export CC_FOR_BUILD
1003   export DLLTOOL
1004   export LD
1005   export NM
1006   export RANLIB
1007   export WINDRES
1008 else
1009   # If CC is still not set, try to get gcc.
1010   if [ -z "${CC}" ]; then
1011     IFS="${IFS=         }"; save_ifs="$IFS"; IFS="${IFS}:"
1012     for dir in $PATH; do
1013       test -z "$dir" && dir=.
1014       if test -f $dir/gcc; then
1015         CC="gcc"
1016         echo 'void f(){}' > conftest.c
1017         if test -z "`${CC} -g -c conftest.c 2>&1`"; then
1018           CFLAGS=${CFLAGS-"-g -O2"}
1019           CXXFLAGS=${CXXFLAGS-"-g -O2"}
1020         else
1021           CFLAGS=${CFLAGS-"-O2"}
1022           CXXFLAGS=${CXXFLAGS-"-O2"}
1023         fi
1024         rm -f conftest*
1025         break
1026       fi
1027     done
1028     IFS="$save_ifs"
1029     CC=${CC-cc}
1030   else
1031     if test -z "${CFLAGS}"; then
1032       # Here CC is set but CFLAGS is not.  Use a quick hack to use -O2 if CC
1033       # is set to a version of gcc.
1034       case "${CC}" in
1035       *gcc)
1036         echo 'void f(){}' > conftest.c
1037         if test -z "`${CC} -g -c conftest.c 2>&1`"; then
1038           CFLAGS=${CFLAGS-"-g -O2"}
1039           CXXFLAGS=${CXXFLAGS-"-g -O2"}
1040         else
1041           CFLAGS=${CFLAGS-"-O2"}
1042           CXXFLAGS=${CXXFLAGS-"-O2"}
1043         fi
1044         rm -f conftest*
1045         ;;
1046       esac
1047     fi
1048   fi
1049
1050   CXX=${CXX-"c++"}
1051   CFLAGS=${CFLAGS-"-g"}
1052   CXXFLAGS=${CXXFLAGS-"-g -O2"}
1053 fi
1054
1055 export CC
1056 export CXX
1057 export CFLAGS
1058 export CXXFLAGS
1059
1060
1061 for subdir in . ${subdirs} ; do
1062
1063     # ${subdir} is relative path from . to the directory we're currently
1064     # configuring.
1065     # ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed.
1066     invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'`
1067
1068     ### figure out what to do with srcdir
1069     case "${srcdir}" in
1070         ".")  # no -srcdir option.  We're building in place.
1071                 makesrcdir=. ;;
1072         /*) # absolute path
1073                 makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'`
1074                 ;;
1075         *) # otherwise relative
1076                 case "${subdir}" in
1077                 .) makesrcdir=${srcdir} ;;
1078                 *) makesrcdir=${invsubdir}${srcdir}/${subdir} ;;
1079                 esac
1080                 ;;
1081     esac
1082
1083     if [ "${subdir}/" != "./" ] ; then
1084         Makefile=${subdir}/Makefile
1085     fi
1086
1087     if [ ! -d ${subdir} ] ; then
1088         if mkdir ${subdir} ; then
1089                 true
1090         else
1091                 echo '***' "${progname}: could not make ${PWD=`pwd`}/${subdir}" 1>&2
1092                 exit 1
1093         fi
1094     fi
1095
1096     case "${removing}" in
1097     "")
1098         case "${subdir}" in
1099         .) ;;
1100         *) eval echo Building in ${subdir} ${redirect} ;;
1101         esac
1102
1103         # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
1104         # Set up the list of links to be made.
1105         # ${links} is the list of link names, and ${files} is the list of names to link to.
1106
1107         # Make the links.
1108         configlinks="${links}"
1109         if [ -r ${subdir}/config.status ] ; then
1110                 mv -f ${subdir}/config.status ${subdir}/config.back
1111         fi
1112         while [ -n "${files}" ] ; do
1113                 # set file to car of files, files to cdr of files
1114                 set ${files}; file=$1; shift; files=$*
1115                 set ${links}; link=$1; shift; links=$*
1116
1117                 if [ ! -r ${srcdir}/${file} ] ; then
1118                   if [ ! -r ${file} ] ; then
1119                     
1120                         echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
1121                         echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
1122                         exit 1
1123                   else
1124                         srcfile=${file}
1125                   fi
1126                 else
1127                         srcfile=${srcdir}/${file}
1128                 fi
1129
1130                 ${remove} -f ${link}
1131                 # Make a symlink if possible, otherwise try a hard link
1132                 if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
1133                         true
1134                 else
1135                         # We need to re-remove the file because Lynx leaves a 
1136                         # very strange directory there when it fails an NFS symlink.
1137                         ${remove} -r -f ${link}
1138                         ${hard_link} ${srcfile} ${link}
1139                 fi
1140                 if [ ! -r ${link} ] ; then
1141                         echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
1142                         exit 1
1143                 fi
1144
1145                 echo "Linked \"${link}\" to \"${srcfile}\"."
1146         done
1147
1148         # Create a .gdbinit file which runs the one in srcdir
1149         # and tells GDB to look there for source files.
1150
1151         if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then
1152                 case ${srcdir} in
1153                 .) ;;
1154                 *) cat > ${subdir}/.gdbinit <<EOF
1155 # ${NO_EDIT}
1156 dir ${makesrcdir}
1157 dir .
1158 source ${makesrcdir}/.gdbinit
1159 EOF
1160                         ;;
1161                 esac
1162         fi
1163
1164         # Install a makefile, and make it set VPATH
1165         # if necessary so that the sources are found.
1166         # Also change its value of srcdir.
1167         # NOTE: Makefile generation constitutes the majority of the time in configure.  Hence, this section has
1168         # been somewhat optimized and is perhaps a bit twisty.
1169
1170         # code is order so as to try to sed the smallest input files we know.
1171         # so do these separately because I don't trust the order of sed -e expressions.
1172
1173         # the five makefile fragments MUST end up in the resulting Makefile in this order: 
1174         # package macros, target, host, site, and package rules.
1175
1176         if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then
1177
1178             # Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem.
1179             rm -f ${subdir}/${Makefile}.tem
1180             case "${package_makefile_rules_frag}" in
1181               "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
1182               *)
1183                       if [ ! -f ${package_makefile_rules_frag} ] ; then
1184                               package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag}
1185                       fi
1186                       if [ -f ${package_makefile_rules_frag} ] ; then
1187                               sed -e "/^####/  r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem
1188                       else
1189                               echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2
1190                               echo '***' is missing in ${PWD=`pwd`}. 1>&2
1191                               cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
1192                       fi
1193             esac
1194             # working copy now in ${Makefile}.tem
1195
1196             # Conditionalize for this site.
1197             rm -f ${Makefile}
1198               case "${site}" in
1199               "") mv ${subdir}/Makefile.tem ${Makefile} ;;
1200               *)
1201                       site_makefile_frag=${srcdir}/config/ms-${site}
1202
1203                       if [ -f ${site_makefile_frag} ] ; then
1204                               sed -e "/^####/  r ${site_makefile_frag}" ${subdir}/Makefile.tem \
1205                                       > ${Makefile}
1206                       else
1207                               mv ${subdir}/Makefile.tem ${Makefile}
1208                               site_makefile_frag=
1209                       fi
1210                       ;;
1211             esac
1212             # working copy now in ${Makefile}
1213
1214             # Conditionalize the makefile for this host.
1215             rm -f ${subdir}/Makefile.tem
1216             case "${host_makefile_frag}" in
1217               "") mv ${Makefile} ${subdir}/Makefile.tem ;;
1218               *)
1219                       if [ ! -f ${host_makefile_frag} ] ; then
1220                               host_makefile_frag=${srcdir}/${host_makefile_frag}
1221                       fi
1222                       if [ -f ${host_makefile_frag} ] ; then
1223                               sed -e "/^####/  r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
1224                       else
1225                               echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
1226                               echo '***' is missing in ${PWD=`pwd`}. 1>&2
1227                               mv ${Makefile} ${subdir}/Makefile.tem
1228                       fi
1229             esac
1230             # working copy now in ${subdir)/Makefile.tem
1231
1232             # Conditionalize the makefile for this target.
1233             rm -f ${Makefile}
1234             case "${target_makefile_frag}" in
1235               "") mv ${subdir}/Makefile.tem ${Makefile} ;;
1236               *)
1237                       if [ ! -f ${target_makefile_frag} ] ; then
1238                               target_makefile_frag=${srcdir}/${target_makefile_frag}
1239                       fi
1240                       if [ -f ${target_makefile_frag} ] ; then
1241                               sed -e "/^####/  r ${target_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
1242                       else
1243                               mv ${subdir}/Makefile.tem ${Makefile}
1244                               target_makefile_frag=
1245                       fi
1246                       ;;
1247             esac
1248             # working copy now in ${Makefile}
1249
1250             # Emit the default values of this package's macros.
1251             rm -f ${subdir}/Makefile.tem
1252             case "${package_makefile_frag}" in
1253               "") mv ${Makefile} ${subdir}/Makefile.tem ;;
1254               *)
1255                       if [ ! -f ${package_makefile_frag} ] ; then
1256                               package_makefile_frag=${srcdir}/${package_makefile_frag}
1257                       fi
1258                       if [ -f ${package_makefile_frag} ] ; then
1259                               sed -e "/^####/  r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
1260                       else
1261                               echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2
1262                               echo '***' is missing in ${PWD=`pwd`}. 1>&2
1263                               mv ${Makefile} ${subdir}/Makefile.tem
1264                       fi
1265             esac
1266             # real copy now in ${subdir}/Makefile.tem
1267
1268             # prepend warning about editting, and a bunch of variables.
1269             rm -f ${Makefile}
1270             cat > ${Makefile} <<EOF
1271 # ${NO_EDIT}
1272 VPATH = ${makesrcdir}
1273 links = ${configlinks}
1274 host_alias = ${host_alias}
1275 host_cpu = ${host_cpu}
1276 host_vendor = ${host_vendor}
1277 host_os = ${host_os}
1278 host_canonical = ${host_cpu}-${host_vendor}-${host_os}
1279 target_alias = ${target_alias}
1280 target_cpu = ${target_cpu}
1281 target_vendor = ${target_vendor}
1282 target_os = ${target_os}
1283 target_canonical = ${target_cpu}-${target_vendor}-${target_os}
1284 EOF
1285             case "${build}" in
1286               "") ;;
1287               *)  cat >> ${Makefile} << EOF
1288 build_alias = ${build_alias}
1289 build_cpu = ${build_cpu}
1290 build_vendor = ${build_vendor}
1291 build_os = ${build_os}
1292 build_canonical = ${build_cpu}-${build_vendor}-${build_os}
1293 EOF
1294             esac
1295
1296             case "${package_makefile_frag}" in
1297               "") ;;
1298               /*) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
1299               *)  echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
1300             esac
1301
1302             case "${target_makefile_frag}" in
1303               "") ;;
1304               /*) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
1305               *)  echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
1306             esac
1307
1308             case "${host_makefile_frag}" in
1309               "") ;;
1310               /*) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
1311               *)  echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
1312             esac
1313
1314             if [ "${site_makefile_frag}" != "" ] ; then
1315                 echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
1316             fi 
1317
1318             # provide a proper gxx_include_dir to all subdirs.
1319             # Note, if you change the default, make sure to fix both here
1320             # and in the gcc subdirectory.
1321             # Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
1322             gxx_include_dir=
1323             if test -n "${with_gxx_include_dir}"; then
1324                 case "${with_gxx_include_dir}" in
1325                   yes )
1326                     echo "configure: error: bad value ${withval} given for g++ include directory" 1>&2
1327                     exit 1
1328                     ;;
1329                   no )
1330                     ;;
1331                   * )
1332                     gxx_include_dir=${with_gxx_include_dir}
1333                     ;;
1334                 esac
1335             fi
1336             if test x${gxx_include_dir} = x; then
1337                 if test x${enable_version_specific_runtime_libs} = xyes; then
1338                     echo gxx_include_dir = '${libsubdir}/include/g++' >> ${Makefile}
1339                 else
1340                     . ${topsrcdir}/config.if
1341                     echo gxx_include_dir = '${prefix}/include/g++'-${libstdcxx_interface} >> ${Makefile}
1342                 fi
1343             else
1344                 echo gxx_include_dir = ${gxx_include_dir} >> ${Makefile}
1345             fi
1346
1347             # record if we want to build shared libs.
1348             if test -z "${enable_shared}"; then
1349                 echo enable_shared = no >> ${Makefile}
1350             else
1351                 echo enable_shared = ${enable_shared} >> ${Makefile}
1352             fi
1353             # record if we want to rumtime library stuff installed in libsubdir.
1354             if test -z "${enable_version_specific_runtime_libs}"; then
1355                 echo enable_version_specific_runtime_libs = no >> ${Makefile}
1356             else
1357                 echo enable_version_specific_runtime_libs = ${enable_version_specific_runtime_libs} >> ${Makefile}
1358             fi
1359
1360             # Emit a macro which describes the file containing gcc's
1361             # version number.
1362             echo gcc_version_trigger = ${gcc_version_trigger} >> ${Makefile}
1363             # And emit a macro defining gcc's version number.
1364             echo gcc_version = ${gcc_version} >> ${Makefile}
1365
1366             # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
1367             # remove any form feeds.
1368             if [ -z "${subdirs}" ]; then
1369                 rm -f ${subdir}/Makefile.tm2
1370                 sed -e "s:^SUBDIRS[     ]*=.*$:SUBDIRS = ${configdirs}:" \
1371                     -e "s:^NONSUBDIRS[  ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
1372                     ${subdir}/Makefile.tem > ${subdir}/Makefile.tm2
1373                 rm -f ${subdir}/Makefile.tem
1374                 mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem
1375             fi
1376             sed     -e "s|^prefix[      ]*=.*$|prefix = ${prefix}|" \
1377                     -e "s|^exec_prefix[         ]*=.*$|exec_prefix = ${exec_prefix}|" \
1378                     -e "s|^bindir[      ]*=.*$|bindir = ${bindir}|" \
1379                     -e "s|^sbindir[     ]*=.*$|sbindir = ${sbindir}|" \
1380                     -e "s|^libexecdir[  ]*=.*$|libexecdir = ${libexecdir}|" \
1381                     -e "s|^datadir[     ]*=.*$|datadir = ${datadir}|" \
1382                     -e "s|^sysconfdir[  ]*=.*$|sysconfdir = ${sysconfdir}|" \
1383                     -e "s|^sharedstatedir[      ]*=.*$|sharedstatedir = ${sharedstatedir}|" \
1384                     -e "s|^localstatedir[       ]*=.*$|localstatedir = ${localstatedir}|" \
1385                     -e "s|^libdir[      ]*=.*$|libdir = ${libdir}|" \
1386                     -e "s|^includedir[  ]*=.*$|includedir = ${includedir}|" \
1387                     -e "s|^oldincludedir[       ]*=.*$|oldincludedir = ${oldincludedir}|" \
1388                     -e "s|^infodir[     ]*=.*$|infodir = ${infodir}|" \
1389                     -e "s|^mandir[      ]*=.*$|mandir = ${mandir}|" \
1390                     -e "/^CC[   ]*=/{
1391                         :loop1
1392                         /\\\\$/ N
1393                         s/\\\\\\n//g
1394                         t loop1
1395                         s%^CC[  ]*=.*$%CC = ${CC}%
1396                         }" \
1397                     -e "/^CXX[  ]*=/{
1398                         :loop2
1399                         /\\\\$/ N
1400                         s/\\\\\\n//g
1401                         t loop2
1402                         s%^CXX[         ]*=.*$%CXX = ${CXX}%
1403                         }" \
1404                     -e "/^CFLAGS[       ]*=/{
1405                         :loop3
1406                         /\\\\$/ N
1407                         s/\\\\\\n//g
1408                         t loop3
1409                         s%^CFLAGS[      ]*=.*$%CFLAGS = ${CFLAGS}%
1410                         }" \
1411                     -e "/^CXXFLAGS[     ]*=/{
1412                         :loop4
1413                         /\\\\$/ N
1414                         s/\\\\\\n//g
1415                         t loop4
1416                         s%^CXXFLAGS[    ]*=.*$%CXXFLAGS = ${CXXFLAGS}%
1417                         }" \
1418                     -e "s|^SHELL[        ]*=.*$|SHELL = ${config_shell}|" \
1419                     -e "s|^srcdir[      ]*=.*$|srcdir = ${makesrcdir}|" \
1420                     -e "s/\f//" \
1421                     -e "s:^program_prefix[      ]*=.*$:program_prefix = ${program_prefix}:" \
1422                     -e "s:^program_suffix[      ]*=.*$:program_suffix = ${program_suffix}:" \
1423                     -e "s:^program_transform_name[      ]*=.*$:program_transform_name = ${program_transform_name}:" \
1424                     -e "s|^tooldir[     ]*=.*$|tooldir = ${tooldir}|" \
1425                     -e "s:^DEFAULT_YACC[         ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \
1426                     -e "s:^DEFAULT_LEX[  ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
1427                     -e "s:^DEFAULT_M4[  ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \
1428                     ${subdir}/Makefile.tem >> ${Makefile}
1429   
1430
1431             # If this is a Canadian Cross, preset the values of many more
1432             # tools.
1433             if [ "${build}" != "${host}" ]; then
1434                 for var in ${tools}; do
1435                     val=`eval 'echo $'"${var}"`
1436                     sed -e "/^${var}[   ]*=/{
1437                            :loop1
1438                            /\\\\$/ N
1439                            /\\\\$/ b loop1
1440                            s/\\\\\\n//g
1441                            s%^${var}[   ]*=.*$%${var} = ${val}%
1442                            }" ${Makefile} > ${Makefile}.tem
1443                     mv -f ${Makefile}.tem ${Makefile}
1444                 done
1445             fi
1446
1447             # final copy now in ${Makefile}
1448
1449         else
1450            echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
1451         fi
1452
1453         rm -f ${subdir}/Makefile.tem
1454
1455         case "${host_makefile_frag}" in
1456         "") using= ;;
1457         *) using="and \"${host_makefile_frag}\"" ;;
1458         esac
1459
1460         case "${target_makefile_frag}" in
1461         "") ;;
1462         *) using="${using} and \"${target_makefile_frag}\"" ;;
1463         esac
1464
1465         case "${site_makefile_frag}" in
1466         "") ;;
1467         *) using="${using} and \"${site_makefile_frag}\"" ;;
1468         esac
1469
1470         newusing=`echo "${using}" | sed 's/and/using/'`
1471         using=${newusing}
1472         echo "Created \"${Makefile}\" in" ${PWD=`pwd`} ${using}
1473
1474         . ${tmpfile}.pos
1475
1476         # describe the chosen configuration in config.status.
1477         # Make that file a shellscript which will reestablish
1478         # the same configuration.  Used in Makefiles to rebuild
1479         # Makefiles.
1480
1481         case "${norecursion}" in
1482         "") arguments="${arguments} --norecursion" ;;
1483         *) ;;
1484         esac
1485
1486         if [ ${subdir} = . ] ; then
1487             echo "#!/bin/sh
1488 # ${NO_EDIT}
1489 # This directory was configured as follows:
1490 ${progname}" ${arguments}  "
1491 # ${using}" > ${subdir}/config.new
1492         else
1493             echo "#!/bin/sh
1494 # ${NO_EDIT}
1495 # This directory was configured as follows:
1496 cd ${invsubdir}
1497 ${progname}" ${arguments}  "
1498 # ${using}" > ${subdir}/config.new
1499         fi
1500         chmod a+x ${subdir}/config.new
1501         if [ -r ${subdir}/config.back ] ; then
1502                 mv -f ${subdir}/config.back ${subdir}/config.status
1503         fi
1504         ${config_shell} ${moveifchange} ${subdir}/config.new ${subdir}/config.status
1505         ;;
1506
1507     *)  rm -f ${Makefile} ${subdir}/config.status ${links} ;;
1508     esac
1509 done
1510
1511 # If there are subdirectories, then recur.
1512 if [ -z "${norecursion}" ] && [ -n "${configdirs}" ] ; then 
1513         for configdir in ${configdirs} ${extraconfigdirs} ; do
1514
1515                 # If configdir contains ',' it is
1516                 # srcdir,builddir,target_alias
1517                 # These come from extraconfigdirs.
1518                 case ${configdir} in
1519                 *,*)
1520                     eval `echo ${configdir} | sed -e 's/\([^,]*\),\([^,]*\),\(.*\)/cfg_dir=\1 bld_dir=\2 tgt_alias=\3/'`
1521                     ;;
1522                 *)
1523                     cfg_dir=${configdir}
1524                     bld_dir=${configdir}
1525                     tgt_alias=${target_alias}
1526                     ;;
1527                 esac
1528
1529                 if [ -d ${srcdir}/${cfg_dir} ] ; then
1530                         eval echo Configuring ${configdir}... ${redirect}
1531                         case "${srcdir}" in
1532                         ".") ;;
1533                         *)
1534                                 if [ ! -d ./${bld_dir} ] ; then
1535                                         if mkdir ./${bld_dir} ; then
1536                                                 true
1537                                         else
1538                                                 echo '***' "${progname}: could not make ${PWD=`pwd`}/${bld_dir}" 1>&2
1539                                                 exit 1
1540                                         fi
1541                                 fi
1542                                 ;;
1543                         esac
1544
1545                         POPDIR=${PWD=`pwd`}
1546                         cd ${bld_dir} 
1547
1548 ### figure out what to do with srcdir
1549                         case "${srcdir}" in
1550                         ".") newsrcdir=${srcdir} ;; # no -srcdir option.  We're building in place.
1551                         /*) # absolute path
1552                                 newsrcdir=${srcdir}/${cfg_dir}
1553                                 srcdiroption="--srcdir=${newsrcdir}"
1554                                 ;;
1555                         ?:*) # absolute path on win32
1556                                 newsrcdir=${srcdir}/${cfg_dir}
1557                                 srcdiroption="--srcdir=${newsrcdir}"
1558                                 ;;
1559                         *) # otherwise relative
1560                                 newsrcdir=../${srcdir}/${cfg_dir}
1561                                 srcdiroption="--srcdir=${newsrcdir}"
1562                                 ;;
1563                         esac
1564
1565                         # Handle --cache-file=../XXX
1566                         case "${cache_file}" in
1567                         "") # empty
1568                                 ;;
1569                         /*) # absolute path
1570                                 cache_file_option="--cache-file=${cache_file}"
1571                                 ;;
1572                         ?:*) # absolute path on win32
1573                                 cache_file_option="--cache-file=${cache_file}"
1574                                 ;;
1575                         *) # relative path
1576                                 cache_file_option="--cache-file=../${cache_file}"
1577                                 ;;
1578                         esac
1579
1580 ### check for guested configure, otherwise fix possibly relative progname
1581                         if [ -f ${newsrcdir}/configure ] ; then
1582                                 recprog=${newsrcdir}/configure
1583                         elif [ -f ${newsrcdir}/configure.in ] ; then
1584                                 case "${progname}" in
1585                                 /*)     recprog=${progname} ;;
1586                                 ?:*)    recprog=${progname} ;;
1587                                 *)      recprog=../${progname} ;;
1588                                 esac
1589                         else
1590                                 eval echo No configuration information in ${cfg_dir} ${redirect}
1591                                 recprog=
1592                         fi
1593
1594 ### The recursion line is here.
1595                         if [ ! -z "${recprog}" ] ; then
1596                                 if eval ${config_shell} ${recprog} ${verbose} ${buildopt} --host=${host_alias} --target=${tgt_alias} \
1597                                         ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
1598                                         ${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${removing} ${other_options} ${redirect} ; then
1599                                         true
1600                                 else
1601                                         echo Configure in `pwd` failed, exiting. 1>&2
1602                                         exit 1
1603                                 fi
1604                         fi
1605
1606                         cd ${POPDIR}
1607                 fi
1608         done
1609 fi
1610
1611 # Perform the same cleanup as the trap handler, minus the "exit 1" of course,
1612 # and reset the trap handler.
1613 rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos
1614 trap 0
1615
1616 exit 0
1617
1618 #
1619 # Local Variables:
1620 # fill-column: 131
1621 # End:
1622 #
1623
1624 # end of configure