kernel: Remove some unused variables in bktr(4) and cxm(4).
[dragonfly.git] / sys / kern / kern_timeout.c
1 /*
2  * Copyright (c) 2004 The DragonFly Project.  All rights reserved.
3  * 
4  * This code is derived from software contributed to The DragonFly Project
5  * by Matthew Dillon <dillon@backplane.com>
6  * 
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in
15  *    the documentation and/or other materials provided with the
16  *    distribution.
17  * 3. Neither the name of The DragonFly Project nor the names of its
18  *    contributors may be used to endorse or promote products derived
19  *    from this software without specific, prior written permission.
20  * 
21  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
25  * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
27  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
29  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
31  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  */
34 /*
35  * Copyright (c) 1982, 1986, 1991, 1993
36  *      The Regents of the University of California.  All rights reserved.
37  * (c) UNIX System Laboratories, Inc.
38  * All or some portions of this file are derived from material licensed
39  * to the University of California by American Telephone and Telegraph
40  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
41  * the permission of UNIX System Laboratories, Inc.
42  *
43  * Redistribution and use in source and binary forms, with or without
44  * modification, are permitted provided that the following conditions
45  * are met:
46  * 1. Redistributions of source code must retain the above copyright
47  *    notice, this list of conditions and the following disclaimer.
48  * 2. Redistributions in binary form must reproduce the above copyright
49  *    notice, this list of conditions and the following disclaimer in the
50  *    documentation and/or other materials provided with the distribution.
51  * 3. All advertising materials mentioning features or use of this software
52  *    must display the following acknowledgement:
53  *      This product includes software developed by the University of
54  *      California, Berkeley and its contributors.
55  * 4. Neither the name of the University nor the names of its contributors
56  *    may be used to endorse or promote products derived from this software
57  *    without specific prior written permission.
58  *
59  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
60  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
61  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
62  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
63  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
64  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
65  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
66  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
67  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
68  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
69  * SUCH DAMAGE.
70  *
71  *      From: @(#)kern_clock.c  8.5 (Berkeley) 1/21/94
72  * $FreeBSD: src/sys/kern/kern_timeout.c,v 1.59.2.1 2001/11/13 18:24:52 archie Exp $
73  */
74 /*
75  * DRAGONFLY BGL STATUS
76  *
77  *      All the API functions should be MP safe.
78  *
79  *      The callback functions will be flagged as being MP safe if the
80  *      timeout structure is initialized with callout_init_mp() instead of
81  *      callout_init().
82  *
83  *      The helper threads cannot be made preempt-capable until after we
84  *      clean up all the uses of splsoftclock() and related interlocks (which
85  *      require the related functions to be MP safe as well).
86  */
87 /*
88  * The callout mechanism is based on the work of Adam M. Costello and 
89  * George Varghese, published in a technical report entitled "Redesigning
90  * the BSD Callout and Timer Facilities" and modified slightly for inclusion
91  * in FreeBSD by Justin T. Gibbs.  The original work on the data structures
92  * used in this implementation was published by G. Varghese and T. Lauck in
93  * the paper "Hashed and Hierarchical Timing Wheels: Data Structures for
94  * the Efficient Implementation of a Timer Facility" in the Proceedings of
95  * the 11th ACM Annual Symposium on Operating Systems Principles,
96  * Austin, Texas Nov 1987.
97  *
98  * The per-cpu augmentation was done by Matthew Dillon.
99  */
100
101 #include <sys/param.h>
102 #include <sys/systm.h>
103 #include <sys/callout.h>
104 #include <sys/kernel.h>
105 #include <sys/interrupt.h>
106 #include <sys/thread.h>
107
108 #include <sys/thread2.h>
109 #include <sys/mplock2.h>
110
111 #ifndef MAX_SOFTCLOCK_STEPS
112 #define MAX_SOFTCLOCK_STEPS 100 /* Maximum allowed value of steps. */
113 #endif
114
115
116 struct softclock_pcpu {
117         struct callout_tailq *callwheel;
118         struct callout * volatile next;
119         struct callout *running;/* currently running callout */
120         int softticks;          /* softticks index */
121         int curticks;           /* per-cpu ticks counter */
122         int isrunning;
123         struct thread thread;
124
125 };
126
127 typedef struct softclock_pcpu *softclock_pcpu_t;
128
129 /*
130  * TODO:
131  *      allocate more timeout table slots when table overflows.
132  */
133 static MALLOC_DEFINE(M_CALLOUT, "callout", "callout structures");
134 static int callwheelsize;
135 static int callwheelmask;
136 static struct softclock_pcpu softclock_pcpu_ary[MAXCPU];
137
138 static void softclock_handler(void *arg);
139
140 static void
141 swi_softclock_setup(void *arg)
142 {
143         int cpu;
144         int i;
145         int target;
146
147         /*
148          * Figure out how large a callwheel we need.  It must be a power of 2.
149          *
150          * ncallout is primarily based on available memory, don't explode
151          * the allocations if the system has a lot of cpus.
152          */
153         target = ncallout / ncpus + 16;
154
155         callwheelsize = 1;
156         while (callwheelsize < target)
157                 callwheelsize <<= 1;
158         callwheelmask = callwheelsize - 1;
159
160         /*
161          * Initialize per-cpu data structures.
162          */
163         for (cpu = 0; cpu < ncpus; ++cpu) {
164                 softclock_pcpu_t sc;
165
166                 sc = &softclock_pcpu_ary[cpu];
167
168                 sc->callwheel = kmalloc(sizeof(*sc->callwheel) * callwheelsize,
169                                         M_CALLOUT, M_WAITOK|M_ZERO);
170                 for (i = 0; i < callwheelsize; ++i)
171                         TAILQ_INIT(&sc->callwheel[i]);
172
173                 /*
174                  * Mark the softclock handler as being an interrupt thread
175                  * even though it really isn't, but do not allow it to
176                  * preempt other threads (do not assign td_preemptable).
177                  *
178                  * Kernel code now assumes that callouts do not preempt
179                  * the cpu they were scheduled on.
180                  */
181                 lwkt_create(softclock_handler, sc, NULL,
182                             &sc->thread, TDF_NOSTART | TDF_INTTHREAD,
183                             cpu, "softclock %d", cpu);
184         }
185 }
186
187 /*
188  * Must occur after ncpus has been initialized.
189  */
190 SYSINIT(softclock_setup, SI_BOOT2_SOFTCLOCK, SI_ORDER_SECOND,
191         swi_softclock_setup, NULL);
192
193 /*
194  * This routine is called from the hardclock() (basically a FASTint/IPI) on
195  * each cpu in the system.  sc->curticks is this cpu's notion of the timebase.
196  * It IS NOT NECESSARILY SYNCHRONIZED WITH 'ticks'!  sc->softticks is where
197  * the callwheel is currently indexed.
198  *
199  * WARNING!  The MP lock is not necessarily held on call, nor can it be
200  * safely obtained.
201  *
202  * sc->softticks is adjusted by either this routine or our helper thread
203  * depending on whether the helper thread is running or not.
204  */
205 void
206 hardclock_softtick(globaldata_t gd)
207 {
208         softclock_pcpu_t sc;
209
210         sc = &softclock_pcpu_ary[gd->gd_cpuid];
211         ++sc->curticks;
212         if (sc->isrunning)
213                 return;
214         if (sc->softticks == sc->curticks) {
215                 /*
216                  * in sync, only wakeup the thread if there is something to
217                  * do.
218                  */
219                 if (TAILQ_FIRST(&sc->callwheel[sc->softticks & callwheelmask]))
220                 {
221                         sc->isrunning = 1;
222                         lwkt_schedule(&sc->thread);
223                 } else {
224                         ++sc->softticks;
225                 }
226         } else {
227                 /*
228                  * out of sync, wakeup the thread unconditionally so it can
229                  * catch up.
230                  */
231                 sc->isrunning = 1;
232                 lwkt_schedule(&sc->thread);
233         }
234 }
235
236 /*
237  * This procedure is the main loop of our per-cpu helper thread.  The
238  * sc->isrunning flag prevents us from racing hardclock_softtick() and
239  * a critical section is sufficient to interlock sc->curticks and protect
240  * us from remote IPI's / list removal.
241  *
242  * The thread starts with the MP lock released and not in a critical
243  * section.  The loop itself is MP safe while individual callbacks
244  * may or may not be, so we obtain or release the MP lock as appropriate.
245  */
246 static void
247 softclock_handler(void *arg)
248 {
249         softclock_pcpu_t sc;
250         struct callout *c;
251         struct callout_tailq *bucket;
252         void (*c_func)(void *);
253         void *c_arg;
254         int mpsafe = 1;
255
256         /*
257          * Run the callout thread at the same priority as other kernel
258          * threads so it can be round-robined.
259          */
260         /*lwkt_setpri_self(TDPRI_SOFT_NORM);*/
261
262         sc = arg;
263         crit_enter();
264 loop:
265         while (sc->softticks != (int)(sc->curticks + 1)) {
266                 bucket = &sc->callwheel[sc->softticks & callwheelmask];
267
268                 for (c = TAILQ_FIRST(bucket); c; c = sc->next) {
269                         if (c->c_time != sc->softticks) {
270                                 sc->next = TAILQ_NEXT(c, c_links.tqe);
271                                 continue;
272                         }
273                         if (c->c_flags & CALLOUT_MPSAFE) {
274                                 if (mpsafe == 0) {
275                                         mpsafe = 1;
276                                         rel_mplock();
277                                 }
278                         } else {
279                                 /*
280                                  * The request might be removed while we 
281                                  * are waiting to get the MP lock.  If it
282                                  * was removed sc->next will point to the
283                                  * next valid request or NULL, loop up.
284                                  */
285                                 if (mpsafe) {
286                                         mpsafe = 0;
287                                         sc->next = c;
288                                         get_mplock();
289                                         if (c != sc->next)
290                                                 continue;
291                                 }
292                         }
293                         sc->next = TAILQ_NEXT(c, c_links.tqe);
294                         TAILQ_REMOVE(bucket, c, c_links.tqe);
295
296                         sc->running = c;
297                         c_func = c->c_func;
298                         c_arg = c->c_arg;
299                         c->c_func = NULL;
300                         KKASSERT(c->c_flags & CALLOUT_DID_INIT);
301                         c->c_flags &= ~CALLOUT_PENDING;
302                         crit_exit();
303                         c_func(c_arg);
304                         crit_enter();
305                         sc->running = NULL;
306                         /* NOTE: list may have changed */
307                 }
308                 ++sc->softticks;
309         }
310         sc->isrunning = 0;
311         lwkt_deschedule_self(&sc->thread);      /* == curthread */
312         lwkt_switch();
313         goto loop;
314         /* NOT REACHED */
315 }
316
317 /*
318  * New interface; clients allocate their own callout structures.
319  *
320  * callout_reset() - establish or change a timeout
321  * callout_stop() - disestablish a timeout
322  * callout_init() - initialize a callout structure so that it can
323  *                      safely be passed to callout_reset() and callout_stop()
324  * callout_init_mp() - same but any installed functions must be MP safe.
325  *
326  * <sys/callout.h> defines three convenience macros:
327  *
328  * callout_active() - returns truth if callout has not been serviced
329  * callout_pending() - returns truth if callout is still waiting for timeout
330  * callout_deactivate() - marks the callout as having been serviced
331  */
332
333 /*
334  * Start or restart a timeout.  Install the callout structure in the 
335  * callwheel.  Callers may legally pass any value, even if 0 or negative,
336  * but since the sc->curticks index may have already been processed a
337  * minimum timeout of 1 tick will be enforced.
338  *
339  * The callout is installed on and will be processed on the current cpu's
340  * callout wheel.
341  *
342  * WARNING! This function may be called from any cpu but the caller must
343  * serialize callout_stop() and callout_reset() calls on the passed
344  * structure regardless of cpu.
345  */
346 void
347 callout_reset(struct callout *c, int to_ticks, void (*ftn)(void *), 
348                 void *arg)
349 {
350         softclock_pcpu_t sc;
351         globaldata_t gd;
352
353 #ifdef INVARIANTS
354         if ((c->c_flags & CALLOUT_DID_INIT) == 0) {
355                 callout_init(c);
356                 kprintf(
357                     "callout_reset(%p) from %p: callout was not initialized\n",
358                     c, ((int **)&c)[-1]);
359                 print_backtrace(-1);
360         }
361 #endif
362         gd = mycpu;
363         sc = &softclock_pcpu_ary[gd->gd_cpuid];
364         crit_enter_gd(gd);
365
366         if (c->c_flags & CALLOUT_ACTIVE)
367                 callout_stop(c);
368
369         if (to_ticks <= 0)
370                 to_ticks = 1;
371
372         c->c_arg = arg;
373         c->c_flags |= (CALLOUT_ACTIVE | CALLOUT_PENDING);
374         c->c_func = ftn;
375         c->c_time = sc->curticks + to_ticks;
376         c->c_gd = gd;
377
378         TAILQ_INSERT_TAIL(&sc->callwheel[c->c_time & callwheelmask], 
379                           c, c_links.tqe);
380         crit_exit_gd(gd);
381 }
382
383 struct callout_remote_arg {
384         struct callout  *c;
385         void            (*ftn)(void *);
386         void            *arg;
387         int             to_ticks;
388 };
389
390 static void
391 callout_reset_ipi(void *arg)
392 {
393         struct callout_remote_arg *rmt = arg;
394
395         callout_reset(rmt->c, rmt->to_ticks, rmt->ftn, rmt->arg);
396 }
397
398 void
399 callout_reset_bycpu(struct callout *c, int to_ticks, void (*ftn)(void *),
400     void *arg, int cpuid)
401 {
402         KASSERT(cpuid >= 0 && cpuid < ncpus, ("invalid cpuid %d", cpuid));
403
404         if (cpuid == mycpuid) {
405                 callout_reset(c, to_ticks, ftn, arg);
406         } else {
407                 struct globaldata *target_gd;
408                 struct callout_remote_arg rmt;
409                 int seq;
410
411                 rmt.c = c;
412                 rmt.ftn = ftn;
413                 rmt.arg = arg;
414                 rmt.to_ticks = to_ticks;
415
416                 target_gd = globaldata_find(cpuid);
417
418                 seq = lwkt_send_ipiq(target_gd, callout_reset_ipi, &rmt);
419                 lwkt_wait_ipiq(target_gd, seq);
420         }
421 }
422
423 /*
424  * Stop a running timer.  WARNING!  If called on a cpu other then the one
425  * the callout was started on this function will liveloop on its IPI to
426  * the target cpu to process the request.  It is possible for the callout
427  * to execute in that case.
428  *
429  * WARNING! This function may be called from any cpu but the caller must
430  * serialize callout_stop() and callout_reset() calls on the passed
431  * structure regardless of cpu.
432  *
433  * WARNING! This routine may be called from an IPI
434  *
435  * WARNING! This function can return while it's c_func is still running
436  *          in the callout thread, a secondary check may be needed.
437  *          Use callout_stop_sync() to wait for any callout function to
438  *          complete before returning, being sure that no deadlock is
439  *          possible if you do.
440  */
441 int
442 callout_stop(struct callout *c)
443 {
444         globaldata_t gd = mycpu;
445         globaldata_t tgd;
446         softclock_pcpu_t sc;
447
448 #ifdef INVARIANTS
449         if ((c->c_flags & CALLOUT_DID_INIT) == 0) {
450                 callout_init(c);
451                 kprintf(
452                     "callout_stop(%p) from %p: callout was not initialized\n",
453                     c, ((int **)&c)[-1]);
454                 print_backtrace(-1);
455         }
456 #endif
457         crit_enter_gd(gd);
458
459         /*
460          * Don't attempt to delete a callout that's not on the queue.  The
461          * callout may not have a cpu assigned to it.  Callers do not have
462          * to be on the issuing cpu but must still serialize access to the
463          * callout structure.
464          *
465          * We are not cpu-localized here and cannot safely modify the
466          * flags field in the callout structure.  Note that most of the
467          * time CALLOUT_ACTIVE will be 0 if CALLOUT_PENDING is also 0.
468          *
469          * If we race another cpu's dispatch of this callout it is possible
470          * for CALLOUT_ACTIVE to be set with CALLOUT_PENDING unset.  This
471          * will cause us to fall through and synchronize with the other
472          * cpu.
473          */
474         if ((c->c_flags & CALLOUT_PENDING) == 0) {
475                 if ((c->c_flags & CALLOUT_ACTIVE) == 0) {
476                         crit_exit_gd(gd);
477                         return (0);
478                 }
479                 if (c->c_gd == NULL || c->c_gd == gd) {
480                         c->c_flags &= ~CALLOUT_ACTIVE;
481                         crit_exit_gd(gd);
482                         return (0);
483                 }
484         }
485         if ((tgd = c->c_gd) != gd) {
486                 /*
487                  * If the callout is owned by a different CPU we have to
488                  * execute the function synchronously on the target cpu.
489                  */
490                 int seq;
491
492                 cpu_ccfence();  /* don't let tgd alias c_gd */
493                 seq = lwkt_send_ipiq(tgd, (void *)callout_stop, c);
494                 lwkt_wait_ipiq(tgd, seq);
495         } else {
496                 /*
497                  * If the callout is owned by the same CPU we can
498                  * process it directly, but if we are racing our helper
499                  * thread (sc->next), we have to adjust sc->next.  The
500                  * race is interlocked by a critical section.
501                  */
502                 sc = &softclock_pcpu_ary[gd->gd_cpuid];
503
504                 c->c_flags &= ~(CALLOUT_ACTIVE | CALLOUT_PENDING);
505                 if (sc->next == c)
506                         sc->next = TAILQ_NEXT(c, c_links.tqe);
507
508                 TAILQ_REMOVE(&sc->callwheel[c->c_time & callwheelmask], 
509                                 c, c_links.tqe);
510                 c->c_func = NULL;
511         }
512         crit_exit_gd(gd);
513         return (1);
514 }
515
516 /*
517  * Issue a callout_stop() and ensure that any callout race completes
518  * before returning.  Does NOT de-initialized the callout.
519  */
520 void
521 callout_stop_sync(struct callout *c)
522 {
523         softclock_pcpu_t sc;
524
525         while (c->c_flags & CALLOUT_DID_INIT) {
526                 callout_stop(c);
527                 if (c->c_gd) {
528                         sc = &softclock_pcpu_ary[c->c_gd->gd_cpuid];
529                         if (sc->running == c) {
530                                 while (sc->running == c)
531                                         tsleep(&sc->running, 0, "crace", 1);
532                         }
533                 }
534                 if ((c->c_flags & (CALLOUT_PENDING | CALLOUT_ACTIVE)) == 0)
535                         break;
536                 kprintf("Warning: %s: callout race\n", curthread->td_comm);
537         }
538 }
539
540 /*
541  * Terminate a callout
542  *
543  * This function will stop any pending callout and also block while the
544  * callout's function is running.  It should only be used in cases where
545  * no deadlock is possible (due to the callout function acquiring locks
546  * that the current caller of callout_terminate() already holds), when
547  * the caller is ready to destroy the callout structure.
548  *
549  * This function clears the CALLOUT_DID_INIT flag.
550  *
551  * lwkt_token locks are ok.
552  */
553 void
554 callout_terminate(struct callout *c)
555 {
556         softclock_pcpu_t sc;
557
558         if (c->c_flags & CALLOUT_DID_INIT) {
559                 callout_stop(c);
560                 sc = &softclock_pcpu_ary[c->c_gd->gd_cpuid];
561                 if (sc->running == c) {
562                         while (sc->running == c)
563                                 tsleep(&sc->running, 0, "crace", 1);
564                 }
565                 KKASSERT((c->c_flags & (CALLOUT_PENDING|CALLOUT_ACTIVE)) == 0);
566                 c->c_flags &= ~CALLOUT_DID_INIT;
567         }
568 }
569
570 /*
571  * Prepare a callout structure for use by callout_reset() and/or 
572  * callout_stop().  The MP version of this routine requires that the callback
573  * function installed by callout_reset() be MP safe.
574  *
575  * The init functions can be called from any cpu and do not have to be
576  * called from the cpu that the timer will eventually run on.
577  */
578 void
579 callout_init(struct callout *c)
580 {
581         bzero(c, sizeof *c);
582         c->c_flags = CALLOUT_DID_INIT;
583 }
584
585 void
586 callout_init_mp(struct callout *c)
587 {
588         callout_init(c);
589         c->c_flags |= CALLOUT_MPSAFE;
590 }
591
592 /* What, are you joking?  This is nuts! -Matt */
593 #if 0
594 #ifdef APM_FIXUP_CALLTODO
595 /* 
596  * Adjust the kernel calltodo timeout list.  This routine is used after 
597  * an APM resume to recalculate the calltodo timer list values with the 
598  * number of hz's we have been sleeping.  The next hardclock() will detect 
599  * that there are fired timers and run softclock() to execute them.
600  *
601  * Please note, I have not done an exhaustive analysis of what code this
602  * might break.  I am motivated to have my select()'s and alarm()'s that
603  * have expired during suspend firing upon resume so that the applications
604  * which set the timer can do the maintanence the timer was for as close
605  * as possible to the originally intended time.  Testing this code for a 
606  * week showed that resuming from a suspend resulted in 22 to 25 timers 
607  * firing, which seemed independant on whether the suspend was 2 hours or
608  * 2 days.  Your milage may vary.   - Ken Key <key@cs.utk.edu>
609  */
610 void
611 adjust_timeout_calltodo(struct timeval *time_change)
612 {
613         struct callout *p;
614         unsigned long delta_ticks;
615
616         /* 
617          * How many ticks were we asleep?
618          * (stolen from tvtohz()).
619          */
620
621         /* Don't do anything */
622         if (time_change->tv_sec < 0)
623                 return;
624         else if (time_change->tv_sec <= LONG_MAX / 1000000)
625                 delta_ticks = (time_change->tv_sec * 1000000 +
626                                time_change->tv_usec + (tick - 1)) / tick + 1;
627         else if (time_change->tv_sec <= LONG_MAX / hz)
628                 delta_ticks = time_change->tv_sec * hz +
629                               (time_change->tv_usec + (tick - 1)) / tick + 1;
630         else
631                 delta_ticks = LONG_MAX;
632
633         if (delta_ticks > INT_MAX)
634                 delta_ticks = INT_MAX;
635
636         /* 
637          * Now rip through the timer calltodo list looking for timers
638          * to expire.
639          */
640
641         /* don't collide with softclock() */
642         crit_enter();
643         for (p = calltodo.c_next; p != NULL; p = p->c_next) {
644                 p->c_time -= delta_ticks;
645
646                 /* Break if the timer had more time on it than delta_ticks */
647                 if (p->c_time > 0)
648                         break;
649
650                 /* take back the ticks the timer didn't use (p->c_time <= 0) */
651                 delta_ticks = -p->c_time;
652         }
653         crit_exit();
654
655         return;
656 }
657 #endif /* APM_FIXUP_CALLTODO */
658 #endif
659