Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 # $DragonFly: src/Makefile.inc1,v 1.44 2004/10/27 16:34:32 joerg Exp $
   4 #
   5 # Make command line options:
   6 #       -DMAKE_KERBEROS5 to build Kerberos5
   7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   8 #       -DNOCLEAN do not clean at all
   9 #       -DNOCRYPT will prevent building of crypt versions
  10 #       -DNOMAN do not build the manual pages
  11 #       -DNOPROFILE do not build profiled libraries
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24 #
  25 # The intended user-driven targets are:
  26 #
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # quickworld  - skip the glue and do a depend+build on the meat
  29 # realquickworld - skip the glue and depend stages and just build the meat
  30 # crossworld  - only build the glue (particularly the cross-build environment)
  31 # installworld- install everything built by "buildworld"
  32 # update      - convenient way to update your source tree (eg: sup/cvs)
  33 # most        - build user commands, no libraries or include files
  34 # installmost - install user commands, no libraries or include files
  35 #
  36 # Standard targets (not defined here) are documented in the makefiles in
  37 # /usr/share/mk.  These include:
  38 #               obj depend all install clean cleandepend cleanobj
  39
  40 # Put initial settings here.
  41 SUBDIR=
  42
  43 # We must do share/info early so that installation of info `dir'
  44 # entries works correctly.  Do it first since it is less likely to
  45 # grow dependencies on include and lib than vice versa.
  46 .if exists(${.CURDIR}/share/info)
  47 SUBDIR+= share/info
  48 .endif
  49
  50 # We must do include and lib early so that the perl *.ph generation
  51 # works correctly as it uses the header files installed by this.
  52 .if exists(${.CURDIR}/include)
  53 SUBDIR+= include
  54 .endif
  55 .if exists(${.CURDIR}/lib)
  56 SUBDIR+= lib
  57 .endif
  58 # This exists simply to ensure that the obj dir hierarchy is
  59 # intact for nrelease, allowing the nrelease Makefile's to
  60 # reference ${.OBJDIR}.
  61 #
  62 .if exists(${.CURDIR}/nrelease)
  63 SUBDIR+= nrelease
  64 .endif
  65
  66 .if exists(${.CURDIR}/bin)
  67 SUBDIR+= bin
  68 .endif
  69 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  70 SUBDIR+= games
  71 .endif
  72 .if exists(${.CURDIR}/gnu)
  73 SUBDIR+= gnu
  74 .endif
  75 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  76     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
  77 SUBDIR+= kerberos5
  78 .endif
  79 .if exists(${.CURDIR}/libexec)
  80 SUBDIR+= libexec
  81 .endif
  82 .if exists(${.CURDIR}/sbin)
  83 SUBDIR+= sbin
  84 .endif
  85 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
  86 SUBDIR+= secure
  87 .endif
  88 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  89 SUBDIR+= share
  90 .endif
  91 .if exists(${.CURDIR}/sys)
  92 SUBDIR+= sys
  93 .endif
  94 .if exists(${.CURDIR}/usr.bin)
  95 SUBDIR+= usr.bin
  96 .endif
  97 .if exists(${.CURDIR}/usr.sbin)
  98 SUBDIR+= usr.sbin
  99 .endif
 100
 101 # etc must be last for "distribute" to work
 102 .if exists(${.CURDIR}/etc)
 103 SUBDIR+= etc
 104 .endif
 105
 106 # These are last, since it is nice to at least get the base system
 107 # rebuilt before you do them.
 108 .if defined(LOCAL_DIRS)
 109 .for _DIR in ${LOCAL_DIRS}
 110 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
 111 SUBDIR+= ${_DIR}
 112 .endif
 113 .endfor
 114 .endif
 115
 116 .if defined(SUBDIR_OVERRIDE)
 117 SUBDIR=         ${SUBDIR_OVERRIDE}
 118 .endif
 119
 120 .if defined(NOCLEANDIR)
 121 CLEANDIR=       clean cleandepend
 122 .else
 123 CLEANDIR=       cleandir
 124 .endif
 125
 126 SUP?=           /usr/local/bin/cvsup
 127 SUPFLAGS?=      -g -L 2 -P -
 128 .if defined(SUPHOST)
 129 SUPFLAGS+=      -h ${SUPHOST}
 130 .endif
 131
 132 # Object directory base in primary make.  Note that when we rerun make
 133 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
 134 # subdirectory because the rest of the build system needs it that way.
 135 # The original object directory base is saved in OBJTREE.
 136 #
 137 MAKEOBJDIRPREFIX?=      /usr/obj
 138 OBJTREE?=               ${MAKEOBJDIRPREFIX}
 139
 140 # Used for stage installs and pathing
 141 #
 142 DESTDIRBASE?=           ${OBJTREE}${.CURDIR}
 143
 144 TARGET_ARCH?=   ${MACHINE_ARCH}
 145 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 146 TARGET?=        ${MACHINE}
 147 .else
 148 TARGET?=        ${TARGET_ARCH}
 149 .endif
 150 .if make(buildworld)
 151 BUILD_ARCH!=    sysctl -n hw.machine_arch
 152 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 153 .error To cross-build, set TARGET_ARCH.
 154 .endif
 155 .endif
 156
 157 # BTOOLS        (Natively built) All non-cross-development tools that the
 158 #               main build needs.  This includes things like 'mkdir' and 'rm'.
 159 #               We will not use the native system's exec path once we start
 160 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
 161 #
 162 # CTOOLS        (Natively built) Cross development tools which are specific
 163 #               to the target architecture.
 164 #
 165 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
 166 #               CTOOLS.
 167 #
 168 # MACHINE_ARCH  Architecture we are building on
 169 # TARGET_ARCH   Architecture we are building for
 170 #
 171 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
 172 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
 173 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
 174
 175 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
 176 # cross-tools stages to augment the existing command path to access newer
 177 # versions of certain utilities such as 'patch' that the cross-tools stage
 178 # might expect.
 179 #
 180 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 181
 182 # The strict temporary command path contains all binaries required
 183 # by the buildworld system after the cross-tools stage.
 184 #
 185 STRICTTMPPATH=  ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 186
 187 TMPDIR?=        /tmp
 188 TMPPID!=        echo $$$$
 189
 190 #
 191 # Building a world goes through the following stages
 192 #
 193 # 1. bootstrap-tool stage [BMAKE]
 194 #       This stage is responsible for creating programs that
 195 #       are needed for backward compatibility reasons. They
 196 #       are not built as cross-tools.
 197 # 2. build-tool stage [TMAKE]
 198 #       This stage is responsible for creating the object
 199 #       tree and building any tools that are needed during
 200 #       the build process.
 201 # 3. cross-tool stage [XMAKE]
 202 #       This stage is responsible for creating any tools that
 203 #       are needed for cross-builds. A cross-compiler is one
 204 #       of them.
 205 # 4. world stage [WMAKE]
 206 #       This stage actually builds the world.
 207 # 5. install stage (optional) [IMAKE]
 208 #       This stage installs a previously built world.
 209 #
 210
 211 # bootstrap-tool stage
 212 #
 213 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 214                 OBJTREE=${OBJTREE} \
 215                 DESTDIR=${BTOOLSDEST} \
 216                 PATH=${BTOOLSPATH}:${PATH} \
 217                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 218
 219 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 220                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 221                 -DNO_WERROR
 222
 223 # build-tool stage
 224 #
 225 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 226                 OBJTREE=${OBJTREE} \
 227                 DESTDIR= \
 228                 PATH=${BTOOLSPATH}:${PATH} \
 229                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 230
 231 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 232                 -DNO_FORTRAN
 233
 234 # cross-tool stage
 235 #
 236 # note: TOOLS_PREFIX points to the obj root holding the cross
 237 #       compiler binaries, while USRDATA_PREFIX points to the obj root
 238 #       holding the target environment (and also determines where cross-built
 239 #       libraries, crt*.o, and include files are installed).
 240 #
 241 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
 242                 OBJTREE=${OBJTREE} \
 243                 DESTDIR=${CTOOLSDEST} \
 244                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 245                 TOOLS_PREFIX=${CTOOLSDEST} \
 246                 USRDATA_PREFIX=${WORLDDEST} \
 247                 PATH=${BTOOLSPATH}:${PATH}
 248
 249 XMAKE=          ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
 250                 -DBOOTSTRAPPING
 251
 252 # world stage, note the strict path and note that TOOLS_PREFIX is left
 253 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
 254 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
 255 # for both binary and library paths, even though it is being compiled to
 256 # WORLDDEST.  None of the programs in the world stage are ever actually
 257 # executed during the buildworld/installworld.
 258 #
 259 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
 260                 OBJTREE=${OBJTREE} \
 261                 MACHINE_ARCH=${TARGET_ARCH} \
 262                 MACHINE=${TARGET} \
 263                 OBJFORMAT_PATH=${CTOOLSDEST} \
 264                 PERL5LIB=${WORLDDEST}/usr/libdata/perl/5.00503 \
 265                 GROFF_BIN_PATH=${BTOOLSDEST}/usr/bin \
 266                 GROFF_FONT_PATH=${BTOOLSDEST}/usr/share/groff_font \
 267                 GROFF_TMAC_PATH=${BTOOLSDEST}/usr/share/tmac
 268
 269 WMAKEENV=       ${CROSSENV} \
 270                 DESTDIR=${WORLDDEST} \
 271                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 272                 PATH=${STRICTTMPPATH}
 273
 274 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 275
 276 # install stage
 277 #
 278 IMAKEENV=       ${CROSSENV} \
 279                 PATH=${STRICTTMPPATH}
 280 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 281
 282 # kernel stage
 283 #
 284 KMAKEENV=       ${WMAKEENV}
 285
 286 # buildworld
 287 #
 288 # Attempt to rebuild the entire system, with reasonable chance of
 289 # success, regardless of how old your existing system is.
 290 #
 291 _worldtmp:
 292         @echo
 293         @echo "--------------------------------------------------------------"
 294         @echo ">>> Rebuilding the temporary build tree"
 295         @echo "--------------------------------------------------------------"
 296 .if !defined(NOCLEAN)
 297         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 298 .else
 299         # XXX - These two can depend on any header file.
 300         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 301         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 302 .endif
 303         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 304 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
 305         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
 306                 -p ${_dir}/  > /dev/null
 307         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
 308                 -p ${_dir}/usr > /dev/null
 309 .endfor
 310         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
 311                 -p ${WORLDDEST}/usr/include > /dev/null
 312         ln -sf ${.CURDIR}/sys ${WORLDDEST}
 313
 314 _bootstrap-tools:
 315         @echo
 316         @echo "--------------------------------------------------------------"
 317         @echo ">>> stage 1: bootstrap tools"
 318         @echo "--------------------------------------------------------------"
 319         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 320 _cleanobj:
 321         @echo
 322         @echo "--------------------------------------------------------------"
 323         @echo ">>> stage 2a: cleaning up the object tree"
 324         @echo "--------------------------------------------------------------"
 325         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 326 _obj:
 327         @echo
 328         @echo "--------------------------------------------------------------"
 329         @echo ">>> stage 2b: rebuilding the object tree"
 330         @echo "--------------------------------------------------------------"
 331         cd ${.CURDIR}; ${WMAKE} par-obj
 332 _build-tools:
 333         @echo
 334         @echo "--------------------------------------------------------------"
 335         @echo ">>> stage 2c: build tools"
 336         @echo "--------------------------------------------------------------"
 337         cd ${.CURDIR}; ${TMAKE} build-tools
 338 _cross-tools:
 339         @echo
 340         @echo "--------------------------------------------------------------"
 341         @echo ">>> stage 3: cross tools"
 342         @echo "--------------------------------------------------------------"
 343         cd ${.CURDIR}; ${XMAKE} cross-tools
 344 _includes:
 345         @echo
 346         @echo "--------------------------------------------------------------"
 347         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
 348         @echo "--------------------------------------------------------------"
 349         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 350 _libraries:
 351         @echo
 352         @echo "--------------------------------------------------------------"
 353         @echo ">>> stage 4b: building libraries"
 354         @echo "--------------------------------------------------------------"
 355         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 356 _depend:
 357         @echo
 358         @echo "--------------------------------------------------------------"
 359         @echo ">>> stage 4c: make dependencies"
 360         @echo "--------------------------------------------------------------"
 361         cd ${.CURDIR}; ${WMAKE} par-depend
 362 everything:
 363         @echo
 364         @echo "--------------------------------------------------------------"
 365         @echo ">>> stage 4d: building everything.."
 366         @echo "--------------------------------------------------------------"
 367         cd ${.CURDIR}; ${WMAKE} all
 368
 369 # note: buildworld no longer depends on _cleanobj because we rm -rf the
 370 # entire object tree and built the bootstrap tools in a different location.
 371 #
 372 # buildworld    - build everything from scratch
 373 # quickworld    - skip the bootstrap, build, and cross-build steps
 374 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
 375 #
 376 # note: we include _obj in realquickworld to prevent accidental creation
 377 # of files in /usr/src.
 378
 379 WMAKE_TGTS=
 380 .if !defined(SUBDIR_OVERRIDE)
 381 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 382 .endif
 383 WMAKE_TGTS+=    _obj _build-tools
 384 .if !defined(SUBDIR_OVERRIDE)
 385 WMAKE_TGTS+=    _cross-tools
 386 .endif
 387 WMAKE_TGTS+=    _includes _libraries _depend everything
 388
 389 buildworld: ${WMAKE_TGTS}
 390
 391 quickworld: _obj _includes _libraries _depend everything
 392
 393 realquickworld: _obj _includes _libraries everything
 394
 395 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
 396
 397 .ORDER: ${WMAKE_TGTS}
 398
 399 #
 400 # installcheck
 401 #
 402 # Checks to be sure system is ready for installworld
 403 #
 404 installcheck:
 405 .if !defined(NO_SENDMAIL)
 406         @if ! `id -u smmsp > /dev/null`; then \
 407                 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
 408                 false; \
 409         fi
 410         @if ! `id -g smmsp > /dev/null`; then \
 411                 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
 412                 false; \
 413         fi
 414 .endif
 415 #
 416 #Check that authpf user and group is installed
 417 #
 418         @if ! `grep -q '^authpf:' /etc/group`; then \
 419                 echo "ERROR: Required authpf group is missing, see /usr/src/UPDATING."; \
 420                 false; \
 421         fi
 422 #
 423 # distributeworld
 424 #
 425 # Distributes everything compiled by a `buildworld'.
 426 #
 427 # installworld
 428 #
 429 # Installs everything compiled by a 'buildworld'.
 430 #
 431 distributeworld installworld: installcheck
 432         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 433
 434 #
 435 # reinstall
 436 #
 437 # If you have a build server, you can NFS mount the source and obj directories
 438 # and do a 'make reinstall' on the *client* to install new binaries from the
 439 # most recent server build.
 440 #
 441 reinstall:
 442         @echo "--------------------------------------------------------------"
 443         @echo ">>> Making hierarchy"
 444         @echo "--------------------------------------------------------------"
 445         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 446         @echo
 447         @echo "--------------------------------------------------------------"
 448         @echo ">>> Installing everything.."
 449         @echo "--------------------------------------------------------------"
 450         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 451 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 452         @echo
 453         @echo "--------------------------------------------------------------"
 454         @echo ">>> Rebuilding man page indices"
 455         @echo "--------------------------------------------------------------"
 456         cd ${.CURDIR}/share/man; ${MAKE} makedb
 457 .endif
 458
 459 redistribute:
 460         @echo "--------------------------------------------------------------"
 461         @echo ">>> Distributing everything.."
 462         @echo "--------------------------------------------------------------"
 463         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 464
 465 #
 466 # buildkernel, nativekernel, quickkernel, and installkernel
 467 #
 468 # Which kernels to build and/or install is specified by setting
 469 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 470 # Only the existing (depending TARGET) config files are used
 471 # for building kernels and only the first of these is designated
 472 # as the one being installed.
 473 #
 474 # You can specify INSTALLSTRIPPED=1 if you wish the installed
 475 # kernel and modules to be stripped of its debug info (required
 476 # symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
 477 # if you only want to strip the modules of their debug info.  These
 478 # only apply if you have DEBUG=-g in your kernel config or make line.
 479 #
 480 # Note that we have to use TARGET instead of TARGET_ARCH when
 481 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 482 # be set to cross-build, we have to make sure TARGET is set
 483 # properly.
 484
 485 .if !defined(KERNCONF) && defined(KERNEL)
 486 KERNCONF=       ${KERNEL}
 487 KERNWARN=       yes
 488 .else
 489 KERNCONF?=      GENERIC
 490 .endif
 491 INSTKERNNAME?=  kernel
 492
 493 KRNLSRCDIR=     ${.CURDIR}/sys
 494 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
 495 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 496 KERNCONFDIR?=   ${KRNLCONFDIR}
 497
 498 BUILDKERNELS=
 499 INSTALLKERNEL=
 500 .for _kernel in ${KERNCONF}
 501 .if exists(${KERNCONFDIR}/${_kernel})
 502 BUILDKERNELS+=  ${_kernel}
 503 .if empty(INSTALLKERNEL)
 504 INSTALLKERNEL= ${_kernel}
 505 .endif
 506 .endif
 507 .endfor
 508
 509 #
 510 # buildkernel
 511 #
 512 # Builds all kernels defined by BUILDKERNELS.
 513 #
 514 bk_tools:
 515         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 516             echo "You must buildworld before buildkernel.  If you wish"; \
 517             echo "to build a kernel using native tools, config it manually"; \
 518             echo "or use the nativekernel target if you are in a rush"; \
 519             exit 1; \
 520         fi
 521
 522 maybe_bk_tools:
 523 .for _kernel in ${BUILDKERNELS}
 524         @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 525             if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 526                 echo "The kernel was build using buildworld tools which no" ; \
 527                 echo "longer appear to exist, quickkernel failed!" ; \
 528                 exit 1; \
 529             fi; \
 530         fi
 531 .endfor
 532
 533 bk_build_list:
 534 .if empty(BUILDKERNELS)
 535         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 536         @false
 537 .endif
 538
 539 bk_kernwarn:
 540 .if defined(KERNWARN)
 541         @echo "--------------------------------------------------------------"
 542         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 543         @echo "--------------------------------------------------------------"
 544         @sleep 3
 545 .endif
 546         @echo
 547
 548 # The buildkernel target rebuilds the specified kernels from scratch
 549 # using the crossbuild tools generated by the last buildworld.  It is
 550 # the safest (but also the most time consuming) way to build a new kernel.
 551 #
 552 buildkernel:    bk_tools bk_build_list bk_kernwarn
 553 .for _kernel in ${BUILDKERNELS}
 554         @echo "--------------------------------------------------------------"
 555         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 556         @echo "--------------------------------------------------------------"
 557         @echo "===> ${_kernel}"
 558 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 559         rm -rf ${KRNLOBJDIR}/${_kernel}
 560 .else
 561         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 562                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
 563                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 564 .endif
 565         mkdir -p ${KRNLOBJDIR}
 566 .if !defined(NO_KERNELCONFIG)
 567         cd ${KRNLCONFDIR}; \
 568                 PATH=${STRICTTMPPATH} \
 569                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 570                         ${KERNCONFDIR}/${_kernel}
 571 .endif
 572         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
 573         cd ${KRNLOBJDIR}/${_kernel}; \
 574             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 575             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 576 .if !defined(NO_KERNELDEPEND)
 577         cd ${KRNLOBJDIR}/${_kernel}; \
 578             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 579 .endif
 580         cd ${KRNLOBJDIR}/${_kernel}; \
 581             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 582         @echo "--------------------------------------------------------------"
 583         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 584         @echo "--------------------------------------------------------------"
 585 .endfor
 586
 587 # The nativekernel target rebuilds the specified kernels from scratch
 588 # using the systems standard compiler rather then using the crossbuild
 589 # tools generated by the last buildworld.  This is fairly safe if your
 590 # system is reasonable up-to-date.
 591 #
 592 nativekernel:   bk_build_list bk_kernwarn
 593 .for _kernel in ${BUILDKERNELS}
 594         @echo "--------------------------------------------------------------"
 595         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 596         @echo "--------------------------------------------------------------"
 597         @echo "===> ${_kernel}"
 598 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 599         rm -rf ${KRNLOBJDIR}/${_kernel}
 600 .else
 601         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
 602                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
 603                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 604 .endif
 605         mkdir -p ${KRNLOBJDIR}
 606 .if !defined(NO_KERNELCONFIG)
 607         cd ${KRNLCONFDIR}; \
 608                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 609                         ${KERNCONFDIR}/${_kernel}
 610 .endif
 611         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
 612         cd ${KRNLOBJDIR}/${_kernel}; \
 613             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 614             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 615 .if !defined(NO_KERNELDEPEND)
 616         cd ${KRNLOBJDIR}/${_kernel}; \
 617             ${MAKE} KERNEL=${INSTKERNNAME} depend
 618 .endif
 619         cd ${KRNLOBJDIR}/${_kernel}; \
 620             ${MAKE} KERNEL=${INSTKERNNAME} all
 621         @echo "--------------------------------------------------------------"
 622         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 623         @echo "--------------------------------------------------------------"
 624 .endfor
 625
 626 # The quickkernel target rebuilds the specified kernels as quickly
 627 # as possible.  It will use the native tools or the buildworld cross tools
 628 # based on whether the kernel was originally generated via buildkernel or
 629 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt,
 630 # nor is the make depend step run.
 631 #
 632 quickkernel:    maybe_bk_tools bk_build_list bk_kernwarn
 633 .for _kernel in ${BUILDKERNELS}
 634         @echo "--------------------------------------------------------------"
 635         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 636         @echo "--------------------------------------------------------------"
 637         @echo "===> ${_kernel}"
 638 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 639 .if !defined(NO_KERNELCONFIG)
 640         cd ${KRNLCONFDIR}; \
 641                 PATH=${STRICTTMPPATH} \
 642                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 643                         ${KERNCONFDIR}/${_kernel}
 644 .endif
 645         cd ${KRNLOBJDIR}/${_kernel}; \
 646             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 647 .else
 648 .if !defined(NO_KERNELCONFIG)
 649         cd ${KRNLCONFDIR}; \
 650             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 651                 ${KERNCONFDIR}/${_kernel}
 652 .endif
 653         cd ${KRNLOBJDIR}/${_kernel}; \
 654             ${MAKE} KERNEL=${INSTKERNNAME} all
 655 .endif
 656         @echo "--------------------------------------------------------------"
 657         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 658         @echo "--------------------------------------------------------------"
 659 .endfor
 660
 661
 662 # installkernel
 663 #
 664 # Install the kernel defined by INSTALLKERNEL
 665 #
 666 installkernel reinstallkernel:
 667 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 668         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 669             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 670 .else
 671         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 672             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 673 .endif
 674
 675 #
 676 # update
 677 #
 678 # Update the source tree, by running sup and/or running cvs to update to the
 679 # latest copy.
 680 #
 681 update:
 682 .if defined(SUP_UPDATE)
 683         @echo "--------------------------------------------------------------"
 684         @echo ">>> Running ${SUP}"
 685         @echo "--------------------------------------------------------------"
 686 .if defined(SUPFILE)
 687         @${SUP} ${SUPFLAGS} ${SUPFILE}
 688 .endif
 689 .if defined(SUPFILE1)
 690         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 691 .endif
 692 .if defined(SUPFILE2)
 693         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 694 .endif
 695 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 696         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 697 .endif
 698 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 699         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 700 .endif
 701 .endif
 702 .if defined(CVS_UPDATE)
 703         @echo "--------------------------------------------------------------"
 704         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 705         @echo "--------------------------------------------------------------"
 706         cd ${.CURDIR}; cvs -q update -rRELENG_4 -P -d
 707 .endif
 708
 709 #
 710 # most
 711 #
 712 # Build most of the user binaries on the existing system libs and includes.
 713 #
 714 most:
 715         @echo "--------------------------------------------------------------"
 716         @echo ">>> Building programs only"
 717         @echo "--------------------------------------------------------------"
 718 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 719         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 720 .endfor
 721
 722 #
 723 # installmost
 724 #
 725 # Install the binaries built by the 'most' target.  This does not include
 726 # libraries or include files.
 727 #
 728 installmost:
 729         @echo "--------------------------------------------------------------"
 730         @echo ">>> Installing programs only"
 731         @echo "--------------------------------------------------------------"
 732 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 733         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 734 .endfor
 735
 736 #
 737 # ------------------------------------------------------------------------
 738 #
 739 # From here onwards are utility targets used by the 'make world' and
 740 # related targets.  If your 'world' breaks, you may like to try to fix
 741 # the problem and manually run the following targets to attempt to
 742 # complete the build.  Beware, this is *not* guaranteed to work, you
 743 # need to have a pretty good grip on the current state of the system
 744 # to attempt to manually finish it.  If in doubt, 'make world' again.
 745 #
 746
 747 # bootstrap-tools: Build all tools required to build all tools.  Note that
 748 # order is important in a number of cases and also note that the bootstrap
 749 # and build tools stages have access to earlier binaries they themselves
 750 # had generated.
 751 #
 752 # patch:        older patch's do not have -i.  This program must be built
 753 #               first so other bootstrap tools that need to apply patches
 754 #               can use it.
 755 # [x]install:   dependancies on various new install features
 756 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 757 #               envs are not compatible with older objformat binaries.
 758 #
 759 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 760 _strfile=       games/fortune/strfile
 761 .endif
 762
 763 bootstrap-tools:
 764 .for _tool in ${_strfile} \
 765     usr.bin/patch \
 766     bin/chmod bin/cp bin/dd bin/mkdir bin/rm bin/echo bin/test \
 767     bin/cat bin/date bin/ln bin/mv bin/csh bin/expr bin/sh bin/ls \
 768     bin/hostname bin/kill \
 769     sbin/sysctl \
 770     usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
 771     usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/file \
 772     usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
 773     usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
 774     usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
 775     usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
 776     usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
 777     usr.bin/vi usr.bin/cap_mkdb usr.bin/vgrind usr.bin/true usr.bin/false \
 778     usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
 779     usr.sbin/chown usr.sbin/mtree usr.sbin/config \
 780     usr.sbin/btxld usr.sbin/pwd_mkdb usr.sbin/zic usr.sbin/makewhatis \
 781     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo \
 782     gnu/usr.bin/grep gnu/usr.bin/sort \
 783     usr.bin/gzip usr.bin/bzip2
 784         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
 785                 cd ${.CURDIR}/${_tool}; \
 786                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 787                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 788                 ${MAKE} DIRPRFX=${_tool}/ all; \
 789                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 790 .endfor
 791         touch ${BTOOLSDEST}/.bootstrap_done
 792
 793 # build-tools: Build special purpose build tools.  gcc2 related tools are
 794 # only built under the i386 architecture.  Other architectures are
 795 # gcc3-only.
 796 #
 797 # XXX we may be able to remove or consolidate this into bootstrap-tools
 798 # now that we have the native helper (.nx/.no) infrastructure.
 799 #
 800 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 801 _games= games/adventure games/hack games/phantasia
 802 .endif
 803
 804 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 805 _share= share/syscons/scrnmaps
 806 .endif
 807
 808 _gcc34_cross= gnu/usr.bin/cc34
 809 _gcc34_tools= gnu/usr.bin/cc34/cc_prep gnu/usr.bin/cc34/cc_tools
 810 .if ${MACHINE_ARCH} == "i386" && ${TARGET_ARCH} == "i386"
 811 _gcc2_cross= gnu/usr.bin/cc
 812 _gcc2_tools= gnu/usr.bin/cc/cc_tools
 813 _binutils= gnu/usr.bin/binutils gnu/usr.bin/binutils214
 814 .else
 815 _binutils= gnu/usr.bin/binutils214
 816 .endif
 817
 818 .if !defined(NO_FORTRAN)
 819 .if ${TARGET_ARCH} == "i386"
 820 _fortran= gnu/usr.bin/cc/f771
 821 .else
 822 _fortran= gnu/usr.bin/cc34/f771
 823 .endif
 824 .endif
 825
 826 .if !defined(NOPERL)
 827 _perl=  gnu/usr.bin/perl/miniperl
 828 .endif
 829
 830 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 831     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 832 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
 833     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 834 .endif
 835
 836 .if defined(RELEASEDIR)
 837 _sysinstall= release/sysinstall
 838 .endif
 839
 840 build-tools:
 841 .for _tool in ${_gcc2_tools} ${_gcc34_tools} \
 842               ${_fortran} ${_perl} ${_libroken4} ${_libkrb5} \
 843               ${_share} ${_sysinstall}
 844         ${ECHODIR} "===> ${_tool} (build-tools)"; \
 845                 cd ${.CURDIR}/${_tool}; \
 846                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 847                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 848                 ${MAKE} DIRPRFX=${_tool}/ all; \
 849                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 850 .endfor
 851         touch ${BTOOLSDEST}/.build_done
 852
 853 #
 854 # cross-tools: Build cross-building tools
 855 #
 856 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
 857 _elf2exe=       usr.sbin/elf2exe
 858 .endif
 859
 860 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 861 _btxld= usr.sbin/btxld
 862 .endif
 863
 864 cross-tools:
 865 .for _tool in ${_btxld} ${_elf2exe} ${_binutils} \
 866               usr.bin/objformat usr.sbin/crunch/crunchide \
 867               ${_gcc2_cross} ${_gcc34_cross}
 868         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
 869                 cd ${.CURDIR}/${_tool}; \
 870                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 871                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 872                 ${MAKE} DIRPRFX=${_tool}/ all; \
 873                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
 874 .endfor
 875         touch ${CTOOLSDEST}/.cross_done
 876
 877 #
 878 # hierarchy - ensure that all the needed directories are present
 879 #
 880 hierarchy:
 881         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 882
 883 #
 884 # libraries - build all libraries, and install them under ${DESTDIR}.
 885 #
 886 # The list of libraries with dependents (${_prebuild_libs}) and their
 887 # interdependencies (__L) are built automatically by the
 888 # ${.CURDIR}/tools/make_libdeps.sh script.
 889 #
 890 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
 891 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
 892 #
 893 libraries:
 894         cd ${.CURDIR}; \
 895             HOST_CCVER=${HOST_CCVER} CCVER=gcc2 \
 896                 ${MAKE} -f Makefile.inc1 _startup_libs2; \
 897             HOST_CCVER=${HOST_CCVER} CCVER=gcc34 \
 898                 ${MAKE} -f Makefile.inc1 _startup_libs34; \
 899             ${MAKE} -f Makefile.inc1 _startup_libs; \
 900             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 901             ${MAKE} -f Makefile.inc1 _generic_libs;
 902         touch ${WORLDDEST}/.libraries_done
 903
 904 # These dependencies are not automatically generated:
 905 #
 906 # gnu/lib/libgcc and lib/csu must be built before all
 907 # shared libraries for ELF.  The targets for _startup_libs{2,3} are
 908 # specifically built using gcc{2,3}.
 909 #
 910 _startup_libs2= gnu/lib/gcc2/libgcc
 911 _startup_libs34=        gnu/lib/gcc34/libgcc
 912 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
 913 _startup_libs=  lib/csu/${MACHINE_ARCH}-elf
 914 .else
 915 _startup_libs=  lib/csu/${MACHINE_ARCH}
 916 .endif
 917 _startup_libs+= lib/csu/common lib/libc
 918
 919 _prebuild_libs=
 920
 921 _generic_libs=  gnu/lib
 922
 923 .if !defined(NOPERL)
 924 _generic_libs+= gnu/usr.bin/perl/libperl
 925 .endif
 926
 927 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 928 _prebuild_libs+=        kerberos5/lib/libasn1
 929 _prebuild_libs+=        kerberos5/lib/libgssapi
 930 _prebuild_libs+=        kerberos5/lib/libkrb5
 931 _prebuild_libs+=        kerberos5/lib/libroken
 932 _generic_libs+= kerberos5/lib
 933 .endif
 934
 935 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
 936                 lib/libncurses lib/libopie lib/libradius lib/libskey \
 937                 lib/libtacplus lib/libutil \
 938                 lib/libz lib/msun
 939
 940 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 941 lib/libskey__L: lib/libcrypt__L lib/libmd__L
 942
 943 _generic_libs+= lib
 944
 945 .if !defined(NOCRYPT)
 946 .if !defined(NO_OPENSSL)
 947 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 948 .if !defined(NO_OPENSSH)
 949 _prebuild_libs+=        secure/lib/libssh
 950 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 951 .endif
 952 .endif
 953 _generic_libs+= secure/lib
 954 .endif
 955
 956 _generic_libs+= usr.bin/lex/lib
 957
 958 .if ${MACHINE_ARCH} == "i386"
 959 _generic_libs+= usr.sbin/pcvt/keycap
 960 .endif
 961
 962 .for _lib in ${_startup_libs2} ${_startup_libs3} ${_startup_libs34} \
 963                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
 964 ${_lib}__L: .PHONY
 965 .if exists(${.CURDIR}/${_lib})
 966         ${ECHODIR} "===> ${_lib}"; \
 967                 cd ${.CURDIR}/${_lib}; \
 968                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 969                 ${MAKE} DIRPRFX=${_lib}/ all; \
 970                 ${MAKE} DIRPRFX=${_lib}/ install
 971 .endif
 972 .endfor
 973
 974 # only mess with gcc2 for i386 architectures.
 975 #
 976 _startup_libs: ${_startup_libs:S/$/__L/}
 977 .if ${TARGET_ARCH} == "i386"
 978 _startup_libs2: ${_startup_libs2:S/$/__L/}
 979 .else
 980 _startup_libs2:
 981 .endif
 982 _startup_libs3: ${_startup_libs3:S/$/__L/}
 983 _startup_libs34: ${_startup_libs34:S/$/__L/}
 984 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 985 _generic_libs: ${_generic_libs:S/$/__L/}
 986
 987 # library targets must be ordered because there are inter-library
 988 # races (e.g. generation of tconfig.h)
 989 #
 990 .ORDER: ${_startup_libs2:S/$/__L/}
 991 .ORDER: ${_startup_libs3:S/$/__L/}
 992 .ORDER: ${_startup_libs34:S/$/__L/}
 993 .ORDER: ${_startup_libs:S/$/__L/}
 994 .ORDER: ${_prebuild_libs:S/$/__L/}
 995 .ORDER: ${_generic_libs:S/$/__L/}
 996
 997 .for __target in clean cleandepend cleandir obj depend includes
 998 .for entry in ${SUBDIR}
 999 ${entry}.${__target}__D: .PHONY
1000         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1001                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1002                 edir=${entry}.${MACHINE_ARCH}; \
1003                 cd ${.CURDIR}/$${edir}; \
1004         else \
1005                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1006                 edir=${entry}; \
1007                 cd ${.CURDIR}/$${edir}; \
1008         fi; \
1009         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1010 .endfor
1011 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1012 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
1013 .endfor
1014 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1015
1016 # The wmake target is used by /usr/bin/wmake to run make in a
1017 # world build environment.
1018 #
1019 wmake:
1020         @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
1021
1022 wmakeenv:
1023         @echo '${WMAKEENV} /bin/sh'
1024
1025 bmake:
1026         @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
1027
1028 bmakeenv:
1029         @echo '${BMAKEENV} /bin/sh'
1030
1031 tmake:
1032         @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
1033
1034 tmakeenv:
1035         @echo '${TMAKEENV} /bin/sh'
1036
1037 .include <bsd.subdir.mk>
1038