4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # The ${rc_conf_files} files should only contain values which override
11 # values set in this file. This eases the upgrade path when defaults
12 # are changed and new features are added.
14 # All arguments must be in double or single quotes.
16 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
17 # $DragonFly: src/etc/defaults/rc.conf,v 1.9 2004/04/15 01:02:45 cpressey Exp $
19 ##############################################################
20 ### Important initial Boot-time options ####################
21 ##############################################################
23 rc_debug="NO" # Set to YES to enable debugging output from rc.d
24 rc_info="YES" # Enables display of informational messages at boot.
25 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
26 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
27 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
28 apmd_enable="NO" # Run apmd to handle APM event from userland.
29 apmd_flags="" # Flags to apmd (if enabled).
30 devd_enable="NO" # Run devd, to trigger programs on device tree changes.
31 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
32 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
33 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
34 pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
35 pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
36 pccard_beep="2" # pccard beep type.
37 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
38 pccardd_flags="-z" # Additional flags for pccardd.
39 pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file
40 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
41 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
42 local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
43 script_name_sep=" " # Change if your startup scripts' names contain spaces
44 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
45 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
46 netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
47 extra_netfs_types="NO" # List of network extra filesystem types for delayed
48 # mount at startup (or NO).
50 ##############################################################
51 ### Network configuration sub-section ######################
52 ##############################################################
54 ### Basic network and firewall/security options: ###
55 hostname="" # Set this!
56 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
57 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
58 dhclient_flags="" # Additional flags to pass to dhcp client.
59 firewall_enable="NO" # Set to YES to enable firewall functionality
60 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
61 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
62 firewall_quiet="NO" # Set to YES to suppress rule display
63 firewall_logging="NO" # Set to YES to enable events logging
64 firewall_flags="" # Flags passed to ipfw when type is a file
65 ip_portrange_first="NO" # Set first dynamically allocated port
66 ip_portrange_last="NO" # Set last dynamically allocated port
67 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
68 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
69 natd_program="/sbin/natd" # path to natd, if you want a different one.
70 natd_enable="NO" # Enable natd (if firewall_enable == YES).
71 natd_interface="" # Public interface or IPaddress to use.
72 natd_flags="" # Additional flags for natd.
73 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
74 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
75 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
76 # /usr/src/contrib/ipfilter/rules for examples
77 ipfilter_flags="" # additional flags for ipfilter
78 ipnat_enable="NO" # Set to YES to enable ipnat functionality
79 ipnat_program="/sbin/ipnat" # where the ipnat program lives
80 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
81 ipnat_flags="" # additional flags for ipnat
82 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
83 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
84 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
85 ipfs_enable="NO" # Set to YES to enable saving and restoring
86 # of state tables at shutdown and boot
87 ipfs_program="/sbin/ipfs" # where the ipfs program lives
88 ipfs_flags="" # additional flags for ipfs
89 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
90 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
91 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
92 # For the following option you need to have TCP_DROP_SYNFIN set in your
93 # kernel. Please refer to LINT and NOTES for details.
94 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
95 # NOTE: this violates the TCP specification
96 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
97 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
98 network_interfaces="auto" # List of network interfaces (or "auto").
99 cloned_interfaces="" # List of cloned network interfaces to create.
100 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
101 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
102 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
103 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
105 # If you have any sppp(4) interfaces above, you might also want to set
106 # the following parameters. Refer to spppcontrol(8) for their meaning.
107 sppp_interfaces="" # List of sppp interfaces.
108 #sppp_interfaces="isp0" # example: sppp over ISDN
109 #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
110 gif_interfaces="NO" # List of GIF tunnels (or "NO").
111 #gif_interfaces="gif0 gif1" # Examples typically for a router.
112 # Choose correct tunnel addrs.
113 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
114 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
116 # User ppp configuration.
117 ppp_enable="NO" # Start user-ppp (or NO).
118 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
119 # For details see man page for ppp(8). Default is auto.
120 ppp_nat="YES" # Use PPP's internal network address translation or NO.
121 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
122 ppp_user="root" # Which user to run ppp as
124 ### Network daemon (miscellaneous) ###
125 syslogd_enable="YES" # Run syslog daemon (or NO).
126 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
127 syslogd_flags="-s" # Flags to syslogd (if enabled).
128 #syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
129 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
130 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
131 inetd_flags="-wW" # Optional flags to inetd
133 # named. It may be possible to run named in a sandbox, man security for
136 named_rcng="NO" # XXX Temporary. Enable to use new rc
137 # functionality in support of named. See
139 named_enable="NO" # Run named, the DNS server (or NO).
140 named_program="/usr/sbin/named" # path to named, if you want a different one.
141 named_flags="-u bind -g bind" # Flags for named
142 named_pidfile="/var/run/named.pid" # Pid file
143 named_chrootdir="" # Chroot directory (or "" not to auto-chroot it)
144 named_chroot_autoupdate="YES" # Automatically install/update chrooted
145 # components of named. See /etc/rc.d/named.
146 named_symlink_enable="YES" # Symlink ${named_pidfile} and /var/run/ndc
147 # to their chrooted counterparts.
150 # kerberos. Do not run the admin daemons on slave servers
152 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
153 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
154 kadmind5_server_enable="NO" # Run kadmind (or NO)
155 kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
156 kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
157 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
159 rwhod_enable="NO" # Run the rwho daemon (or NO).
160 rwhod_flags="" # Flags for rwhod
161 rarpd_enable="NO" # Run rarpd (or NO).
162 rarpd_flags="" # Flags to rarpd.
163 bootparamd_enable="NO" # Run bootparamd (or NO).
164 bootparamd_flags="" # Flags to bootparamd
165 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
166 pppoed_provider="*" # Provider and ppp(8) config file entry.
167 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
168 pppoed_interface="fxp0" # The interface that pppoed runs on.
169 sshd_enable="NO" # Enable sshd
170 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
171 sshd_flags="" # Additional flags for sshd.
173 ### Network File System (NFS): ###
174 ### Server-side options also need rpcbind_enable="YES" ###
175 amd_enable="NO" # Run amd service with $amd_flags (or NO).
176 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
177 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
178 nfs_client_enable="NO" # This host is an NFS client (or NO).
179 nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
180 nfs_access_cache="2" # Client cache timeout in seconds
181 nfs_server_enable="NO" # This host is an NFS server (or NO).
182 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
183 mountd_enable="NO" # Run mountd (or NO).
184 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
185 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
186 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
187 nfs_bufpackets="" # bufspace (in packets) for client
188 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
189 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
190 rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
191 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
192 # this is rpcbind in 5.x
193 rpcbind_program="/usr/sbin/portmap" # path to rpcbind, if you want a different one.
194 rpcbind_flags="" # Flags to rpcbind (if enabled).
195 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
196 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
197 keyserv_flags="" # Flags to keyserv (if enabled).
199 ### Network Time Services options: ###
200 timed_enable="NO" # Run the time daemon (or NO).
201 timed_flags="" # Flags to timed (if enabled).
202 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
203 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
204 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
205 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
206 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
207 ntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled).
209 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
210 nis_client_enable="NO" # We're an NIS client (or NO).
211 nis_client_flags="" # Flags to ypbind (if enabled).
212 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
213 nis_ypset_flags="" # Flags to ypset (if enabled).
214 nis_server_enable="NO" # We're an NIS server (or NO).
215 nis_server_flags="" # Flags to ypserv (if enabled).
216 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
217 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
218 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
219 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
221 ### Network routing options: ###
222 defaultrouter="NO" # Set to default gateway (or NO).
223 static_routes="" # Set to static route list (or leave empty).
224 gateway_enable="NO" # Set to YES if this host will be a gateway.
225 router_enable="NO" # Set to YES to enable a routing daemon.
226 router="/sbin/routed" # Name of routing daemon to use if enabled.
227 router_flags="-q" # Flags for routing daemon.
228 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
229 mrouted_flags="" # Flags for multicast routing daemon.
230 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
231 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
232 ipxrouted_flags="" # Flags for IPX routing daemon.
233 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
234 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
235 accept_sourceroute="NO" # accept source routed packets to us
237 ### ATM interface options: ###
238 atm_enable="NO" # Configure ATM interfaces (or NO).
239 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
240 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
241 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
242 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
243 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
244 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
245 atm_pvcs="" # Set to PVC list (or leave empty).
246 atm_arps="" # Set to permanent ARP list (or leave empty).
248 ### ISDN interface options: (see also: /usr/share/examples/isdn) ###
249 isdn_enable="NO" # Enable the ISDN subsystem (or NO).
250 isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
251 isdn_flags="-dn -d0x1f9" # Flags for isdnd
252 isdn_ttype="cons25" # terminal type for fullscreen mode
253 isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
254 isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
255 isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
257 ### Miscellaneous network options: ###
258 icmp_bmcastecho="NO" # respond to broadcast ping packets
260 ### IPv6 options: ###
261 ipv6_enable="NO" # Set to YES to set up for IPv6.
262 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
263 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
264 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
265 ipv6_static_routes="" # Set to static route list (or leave empty).
266 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
267 # route toward loopback interface.
268 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
269 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
270 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
271 ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
272 ipv6_router_flags="" # Flags to IPv6 routing daemon.
273 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
275 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
276 # node, you should stop advertisement.
277 #ipv6_network_interfaces="ed0 ep0" # Examples for router
278 # or static configuration for end node.
279 # Choose correct prefix value.
280 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
281 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
282 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
283 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
284 ipv6_default_interface="NO" # Default output interface for scoped addrs.
285 # Now this works only for IPv6 link local
287 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
288 # advertisement daemon. If set to YES,
289 # this router becomes a possible candidate
290 # IPv6 default router for local subnets.
291 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
292 mroute6d_enable="NO" # Do IPv6 multicast routing.
293 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
294 # routing daemon. You need to
295 # install it from package or
297 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
298 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
299 # tunneling interface. Specify this entry
300 # to enable 6to4 interface.
301 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
302 # to limit peer addr range. Effective value
304 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
305 # If you like, you can set "AUTO" for this.
306 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
307 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
308 # IPv6-to-IPv4 TCP translator. You also need
310 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
311 # communication. (like ::ffff:a.b.c.d)
312 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
314 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
315 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
316 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
317 ipv6_firewall_logging="NO" # Set to YES to enable events logging
318 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
319 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
320 # see /usr/src/contrib/ipfilter/rules
323 ##############################################################
324 ### System console options #################################
325 ##############################################################
327 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
328 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
329 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
330 keychange="NO" # function keys default values (or NO).
331 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
332 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
333 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
334 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
335 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
336 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
337 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
338 moused_enable="NO" # Run the mouse daemon.
339 moused_type="auto" # See man page for rc.conf(5) for available settings.
340 moused_port="/dev/psm0" # Set to your mouse port.
341 moused_flags="" # Any additional flags to moused.
342 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
343 # language code table, specify alternative range
344 # start like mousechar_start=3, see vidcontrol(1)
345 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
346 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
349 ##############################################################
350 ### pcvt console driver options ############################
351 ##############################################################
353 pcvt_verbose="NO" # set to YES to enable verbose configuration messages
354 pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO).
355 pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO).
356 pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO).
357 pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO).
358 pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO).
359 pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO).
360 pcvt_lines="NO" # lines (25, 28, 40, 50 or NO).
361 pcvt_blanktime="NO" # blank time (in seconds) (or NO).
362 pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO).
363 pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO).
364 pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO).
367 ##############################################################
368 ### Mail Transfer Agent (MTA) options ######################
369 ##############################################################
371 mta_start_script="/etc/rc.sendmail"
372 # Script to start your chosen MTA, called by /etc/rc.
373 # Settings for /etc/rc.sendmail:
374 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
375 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
376 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
377 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
378 # Flags for localhost-only MTA
379 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
380 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
381 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
382 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
383 # Flags for sendmail_msp_queue daemon.
386 ##############################################################
387 ### Miscellaneous administrative options ###################
388 ##############################################################
390 mixer_enable="NO" # Manage mixer settings across reboots
391 cron_enable="YES" # Run the periodic job daemon.
392 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
393 cron_flags="" # Which options to pass to the cron daemon.
394 lpd_enable="NO" # Run the line printer daemon.
395 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
396 lpd_flags="" # Flags to lpd (if enabled).
397 usbd_enable="NO" # Run the usbd daemon.
398 usbd_flags="" # Flags to usbd (if enabled).
399 dumpdev="NO" # Device name to crashdump to (or NO).
400 dumpdir="/var/crash" # Directory where crash dumps are to be stored
401 savecore_flags="" # Used if dumpdev is enabled above, and present.
402 enable_quotas="NO" # turn on quotas on startup (or NO).
403 check_quotas="YES" # Check quotas on startup (or NO).
404 accounting_enable="NO" # Turn on process accounting (or NO).
405 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
406 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
407 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
408 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
409 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
410 osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO).
411 clear_tmp_enable="NO" # Clear /tmp at startup.
412 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
413 ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
414 # shared library search paths
415 ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
416 # a.out shared library search paths
417 kern_securelevel_enable="NO" # kernel security level (see init(8)),
418 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
419 lomac_enable="NO" # start lomac(4) security module at boot
420 update_motd="YES" # update version info in /etc/motd (or NO)
421 start_vinum="NO" # set to YES to start vinum
422 unaligned_print="YES" # print unaligned access warnings on the alpha (or NO).
423 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
424 # /var/db/entropy is preferred if / is not available.
425 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
426 entropy_save_sz="2048" # Size of the entropy cache files.
427 entropy_save_num="8" # Number of entropy cache files to save.
428 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
429 jail_enable="NO" # Set to NO to disable starting of any jails
430 jail_list="" # Space separated list of names of jails
431 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
432 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
433 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
434 resident_enable="NO" # Proccess /etc/resident.conf
435 varsym_enable="NO" # Proccess /etc/varsym.conf
436 watchdogd_enable="NO" # Start the software watchdog daemon
438 ##############################################################
439 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
440 ### scripts to source rc_conf_files overrides safely. ##
441 ##############################################################
443 if [ -z "${source_rc_confs_defined}" ]; then
444 source_rc_confs_defined=yes
446 local i sourced_files
447 for i in ${rc_conf_files}; do
448 case ${sourced_files} in
452 sourced_files="${sourced_files}:$i:"
projects / dragonfly.git / blob