3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
18 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info="YES" # Enables display of informational messages at boot.
26 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
27 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
28 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
29 powerd_enable="NO" # Run powerd to adjust CPU speed.
30 powerd_flags="" # additional flags for powerd(8).
31 sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes.
32 sensorsd_flags="" # additional flags for sensorsd(8).
33 hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging.
34 hotplugd_flags="" # additional flags for hotplugd(8)
35 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
36 pccard_ether_delay="5" # Delay before trying to start DHCP client in pccard_ether
37 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
38 local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d"
39 # startup script dirs.
40 script_name_sep=" " # Change if your startup scripts' names contain spaces
41 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
42 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
43 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
44 extra_netfs_types="NO" # List of network extra filesystem types for delayed
45 # mount at startup (or NO).
46 devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf"
47 # Config files for devfs(5)
48 tmpfs_var_run="NO" # Set to YES to mount a tmpfs(5) at /var/run
49 tmpfs_tmp="NO" # Set to YES to mount a tmpfs(5) at /tmp
51 ##############################################################
52 ### Network configuration sub-section ######################
53 ##############################################################
55 ### Basic network and firewall/security options: ###
57 # see 'man firewall' for an explanation of the default firewall rules
59 hostname="" # Set this!
60 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
61 dhcp_client="dhclient" # Name of the rc script that is called to start
62 # the DHCP client, e.g., "dhcpcd" or "dhclient"
63 dhcpcd_enable="NO" # Set to YES to run dhcpcd in master mode.
64 dhcpcd_program="/sbin/dhcpcd"
66 dhcpcd_chrootdir="/var/chroot/dhcp"
67 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
68 dhclient_flags="-w" # Additional flags to pass to dhcp client.
69 firewall_enable="NO" # Set to YES to enable firewall functionality
70 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
71 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
72 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
73 firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
74 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
75 firewall_open_tcp_ports="22 25 53 80 113 443"
76 firewall_open_udp_ports="53"
77 firewall_quiet="NO" # Set to YES to suppress rule display
78 firewall_logging="NO" # Set to YES to enable events logging
79 firewall_flags="" # Flags passed to ipfw when type is a file
80 ipfw3_enable="NO" # Set to YES to enable ipfw3(8) firewall
81 ipfw3_program="/sbin/ipfw3" # where the ipfw3 program lives
82 ipfw3_script="/etc/ipfw3.rules" # Script to run to set up the firewall rules
83 ipfw3_modules="ipfw3 ipfw3_basic" # IPFW3 modules to be loaded
84 ip_portrange_first="NO" # Set first dynamically allocated port
85 ip_portrange_last="NO" # Set last dynamically allocated port
86 natd_program="/sbin/natd" # path to natd, if you want a different one.
87 natd_enable="NO" # Enable natd (if firewall_enable == YES).
88 natd_interface="" # Public interface or IPaddress to use.
89 natd_flags="" # Additional flags for natd.
90 pf_enable="NO" # Set to YES to enable packet filter (pf)
91 pf_rules="/etc/pf.conf" # rules definition file for pf
92 pf_program="/usr/sbin/pfctl" # where the pfctl program lives
93 pf_flags="" # additional flags for pfctl
94 pflog_enable="NO" # Set to YES to enable packet filter logging
95 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
96 pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
97 pflog_flags="" # additional flags for pflogd
98 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
99 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
100 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
101 # For the following option you need to have TCP_DROP_SYNFIN set in your
102 # kernel. Please refer to LINT64 details.
103 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
104 # NOTE: this violates the TCP specification
105 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
106 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
107 netif_enable="YES" # Set to NO to not configure network interfaces.
108 network_interfaces="auto" # List of network interfaces (or "auto").
109 cloned_interfaces="" # List of cloned network interfaces to create.
110 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config.
111 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
112 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
113 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
115 # If you have any sppp(4) interfaces above, you might also want to set
116 # the following parameters. Refer to spppcontrol(8) for their meaning.
117 sppp_interfaces="" # List of sppp interfaces.
118 #sppp_interfaces="...0" # example: sppp over ...
119 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
120 gif_interfaces="NO" # List of GIF tunnels (or "NO").
121 #gif_interfaces="gif0 gif1" # Examples typically for a router.
122 # Choose correct tunnel addrs.
123 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
124 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
126 # User ppp configuration.
127 ppp_enable="NO" # Start user-ppp (or NO).
128 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
129 # For details see man page for ppp(8). Default is auto.
130 ppp_nat="YES" # Use PPP's internal network address translation or NO.
131 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
132 ppp_user="root" # Which user to run ppp as
134 ### Network daemon (miscellaneous) ###
135 syslogd_enable="YES" # Run syslog daemon (or NO).
136 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
137 #syslogd_flags="-s" # Flags to syslogd (if enabled).
138 syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
139 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
140 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
141 inetd_flags="-wW" # Optional flags to inetd
143 rwhod_enable="NO" # Run the rwho daemon (or NO).
144 rwhod_flags="" # Flags for rwhod
145 rarpd_enable="NO" # Run rarpd (or NO).
146 rarpd_flags="" # Flags to rarpd.
147 bootparamd_enable="NO" # Run bootparamd (or NO).
148 bootparamd_flags="" # Flags to bootparamd
149 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
150 pppoed_provider="*" # Provider and ppp(8) config file entry.
151 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
152 pppoed_interface="fxp0" # The interface that pppoed runs on.
153 sshd_enable="NO" # Enable sshd
154 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
155 sshd_flags="" # Additional flags for sshd.
157 ftpd_enable="NO" # Run stand-alone ftp daemon (or NO).
158 ftpd_flags="" # Flags for ftpd, -D added implicitly.
160 ### Network File System (NFS): ###
161 ### Server-side options also need rpcbind_enable="YES" ###
163 ### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
164 ### the mtime matches the data cache is left intact.
166 autofs_enable="NO" # Run automountd(8)
167 automount_flags="" # Flags to automount(8) (if autofs enabled).
168 automountd_flags="" # Flags to automountd(8) (if autofs enabled).
169 autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
170 nfs_client_enable="NO" # This host is an NFS client (or NO).
171 nfs_access_cache="5" # Client attribute cache timeout in seconds
172 #nfs_neg_cache="3" # Client attribute negative hit cache timeout
173 nfs_server_enable="NO" # This host is an NFS server (or NO).
174 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
175 mountd_enable="NO" # Run mountd (or NO).
176 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
177 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
178 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
179 nfs_bufpackets="" # bufspace (in packets) for client
180 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
181 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
182 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
183 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
184 rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
185 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
186 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
187 rpcbind_flags="" # Flags to rpcbind (if enabled).
188 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
189 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
190 keyserv_flags="" # Flags to keyserv (if enabled).
192 ### Network Time Services options: ###
193 dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO).
194 dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
195 dntpd_flags="" # Flags to dntpd (if enabled) also server name(s)
197 # Bluetooth deamons and options:
198 btconfig_enable="NO" # Configure Bluetooth devices (or NO).
199 btconfig_devices="" # List of Bluetooth devices (or empty for all).
200 #btconfig_<device>="" # Parameters to pass to <device>.
201 btconfig_args="" # Parameters to pass to all devices.
202 sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO).
203 sdpd_flags="" # Flags to sdpd (if enabled).
204 bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO).
205 bthcid_flags="" # Flags to bthcid (if enabled).
207 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
208 nis_client_enable="NO" # We're an NIS client (or NO).
209 nis_client_flags="" # Flags to ypbind (if enabled).
210 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
211 nis_ypset_flags="" # Flags to ypset (if enabled).
212 nis_server_enable="NO" # We're an NIS server (or NO).
213 nis_server_flags="" # Flags to ypserv (if enabled).
214 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
215 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
216 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
217 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
219 ### Network routing options: ###
220 defaultrouter="NO" # Set to default gateway (or NO).
221 static_routes="" # Set to static route list (or leave empty).
222 gateway_enable="NO" # Set to YES if this host will be a gateway.
223 router_enable="NO" # Set to YES to enable a routing daemon.
224 router_program="/sbin/routed" # Name of routing daemon to use if enabled.
225 router_flags="-q" # Flags for routing daemon.
226 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
227 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
228 accept_sourceroute="NO" # accept source routed packets to us
230 ### Miscellaneous network options: ###
231 icmp_bmcastecho="NO" # respond to broadcast ping packets
233 ### IPv6 options: ###
234 ipv6_enable="NO" # Set to YES to set up for IPv6.
235 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
236 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
237 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
238 ipv6_static_routes="" # Set to static route list (or leave empty).
239 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
240 # route toward loopback interface.
241 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
242 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
243 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
244 ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
245 ipv6_router_flags="" # Flags to IPv6 routing daemon.
246 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
248 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
249 # node, you should stop advertisement.
250 #ipv6_network_interfaces="ed0 ep0" # Examples for router
251 # or static configuration for end node.
252 # Choose correct prefix value.
253 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
254 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
255 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
256 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
257 ipv6_default_interface="NO" # Default output interface for scoped addrs.
258 # Now this works only for IPv6 link local
260 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
261 # advertisement daemon. If set to YES,
262 # this router becomes a possible candidate
263 # IPv6 default router for local subnets.
264 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
265 rtsold_enable="NO" # Set to YES to enable an IPv6 routing
266 # solicitation daemon. This is used for
267 # automatic discovery of non-link local
269 rtsold_flags="-a" # Do autoprobing of outgoing interface.
270 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
271 # tunneling interface. Specify this entry
272 # to enable 6to4 interface.
273 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
274 # to limit peer addr range. Effective value
276 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
277 # If you like, you can set "AUTO" for this.
278 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
279 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
281 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
282 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
283 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
284 ipv6_firewall_logging="NO" # Set to YES to enable events logging
285 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
286 ip6addrctl_enable="YES" # Set to YES to enable default address selection
287 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
288 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
289 # (ipv4_prefer, ipv6_prefer, or AUTO)
291 ##############################################################
292 ### System console options #################################
293 ##############################################################
295 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
296 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
297 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
298 keychange="NO" # function keys default values (or NO).
299 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
300 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
301 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
302 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
303 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
304 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
305 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
306 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
307 # specifically overridden in rc.conf(5).
308 moused_enable="NO" # Run the mouse daemon.
309 moused_type="auto" # See man page for rc.conf(5) for available settings.
310 moused_port="/dev/psm0" # Set to your mouse port.
311 moused_flags="" # Any additional flags to moused.
312 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
313 # language code table, specify alternative range
314 # start like mousechar_start=3, see vidcontrol(1)
315 vidhistory="" # Set video history buffer size
316 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
317 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
320 ##############################################################
321 ### Mail Transfer Agent (MTA) options ######################
322 ##############################################################
324 mta_start_script="/etc/rc.sendmail"
325 # Script to start your chosen MTA, called by /etc/rc.
326 # Settings for /etc/rc.sendmail:
327 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
328 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
329 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
330 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
331 # Flags for localhost-only MTA
332 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
333 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
334 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
335 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
336 # Flags for sendmail_msp_queue daemon.
337 sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO).
340 ##############################################################
341 ### Miscellaneous administrative options ###################
342 ##############################################################
344 mixer_enable="YES" # Manage mixer settings across reboots
345 cron_enable="YES" # Run the periodic job daemon.
346 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
347 cron_flags="" # Which options to pass to the cron daemon.
348 lpd_enable="NO" # Run the line printer daemon.
349 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
350 lpd_flags="" # Flags to lpd (if enabled).
351 nscd_enable="NO" # Run the nsswitch caching daemon.
352 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
353 devd_flags="" # Additional flags for devd(8).
354 dumpdev="NO" # Device name to crashdump to (or NO).
355 dumpdir="/var/crash" # Directory where crash dumps are to be stored
356 savecore_flags="" # Used if dumpdev is enabled above, and present.
357 crashinfo_enable="YES" # Automatically generate crash dump summary.
358 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
359 enable_quotas="NO" # turn on quotas on startup (or NO).
360 check_quotas="YES" # Check quotas on startup (or NO).
361 accounting_enable="NO" # Turn on process accounting (or NO).
362 sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO).
363 clear_tmp_enable="NO" # Clear /tmp at startup.
364 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
365 ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib"
366 # shared library search paths
367 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
368 # Local directories with ldconfig configuration files.
369 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
370 update_motd="YES" # update version info in /etc/motd (or NO)
371 start_vinum="NO" # set to YES to start vinum
372 udevd_enable="NO" # Run udevd(8) daemon.
373 udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm).
374 lvm_enable="NO" # Run LVM volume discovery.
375 entropy_dir="/var/db/entropy" # Set to NO to disable
376 entropy_file="/var/db/entropy/reboot" # Set to NO to disable
377 entropy_save_sz="16384" # Size of the entropy cache files (in bytes)
378 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
379 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
380 newsyslog_enable="NO" # Run newsyslog at startup.
381 newsyslog_flags="" # Flags to newsyslog (if enabled).
382 resident_enable="NO" # Process /etc/resident.conf
383 varsym_enable="NO" # Process /etc/varsym.conf
384 watchdogd_enable="NO" # Start the software watchdog daemon
386 ##############################################################
387 ### Jail Configuration #######################################
388 ##############################################################
390 jail_enable="NO" # Set to NO to disable starting of any jails
391 jail_list="" # Space separated list of names of jails
392 jail_default_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
393 jail_default_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
394 jail_default_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
395 jail_default_chflags_allow="NO" # Allow altering system files within a jail
396 jail_default_raw_sockets_allow="NO" # Allow raw sockets within a jail
399 # To use rc's built-in jail infrastructure create entries for
400 # each jail, specified in jail_list, with the following variables.
402 # - replace 'example' with the jail's name.
403 # - except rootdir, hostname and ip, all of the following variables may be made
404 # global jail variables if you don't specify a jail name (ie. jail_interface).
406 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
407 #jail_example_hostname="default.domain.com" # Jail's hostname
408 #jail_example_ip="192.168.0.10" # Jail's IP number
409 #jail_example_interface="" # Interface to create the IP alias on
410 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
411 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
412 #jail_example_procfs_enable="NO" # mount procfs in jail
413 #jail_example_devfs_enable="NO" # mount devfs in jail
414 #jail_example_mount_enable="NO" # mount/umount jail's fs
415 #jail_example_fstab="" # fstab(5) for mount/umount
416 #jail_example_flags="-l -U root" # flags for jail(8)
418 ##############################################################
419 ### VFS quota options #######################################
420 ##############################################################
422 vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options
423 vfs_quota_sync="" # Space separated list of mount points or "NO"
425 ##############################################################
426 ### VKernel options #########################################
427 ##############################################################
429 vkernel_enable="NO" # Set to YES to enable starting of vkernels
430 vkernel_list="" # Space separated list of names of vkernels
431 #vkernel_bin="/boot/kernel.VKERNEL64" # Default path to the vkernel binary
432 #vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued
434 vknetd_enable="NO" # Bridged networking
435 vknetd_flags="-U" # Bridged networking flags
437 # Create an entry for each vkernel specified in vkernel_list
438 # replacing 'example' by the name of the vkernel.
440 #vkernel_example_bin="/boot/kernel.VKERNEL64"
441 # Path to the vkernel binary
442 #vkernel_example_memsize="64m"
443 # Amount of memory for the vkernel
444 #vkernel_example_rootimg_list="/var/vkernel/rootimg.01"
445 # Space separated list of disk images
446 #vkernel_example_memimg="/var/vkernel/memimg.000000"
447 # Optional: Memory image file for vkernel
448 #vkernel_example_iface_list="auto:bridge0"
449 # Optional: space separated list network interfaces for the vkernel
450 #vkernel_example_logfile="/dev/null"
451 # Optional: path to the console log file
452 #vkernel_example_user="root"
453 # Optional: user that will run the vkernel
454 #vkernel_example_flags="-U"
455 # Optional: aditional flags to start the vkernel with
456 #vkernel_example_kill_timeout="45"
457 # Optional: timeout before SIGKILL is issued when stopping the vkernel
459 ##############################################################
460 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
461 ### scripts to source rc_conf_files overrides safely. ##
462 ##############################################################
464 if [ -z "${source_rc_confs_defined}" ]; then
465 source_rc_confs_defined=yes
467 local i sourced_files
468 for i in ${rc_conf_files}; do
469 case ${sourced_files} in
473 sourced_files="${sourced_files}:$i:"