2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
4 # Build-time options are documented in make.conf(5).
6 # The intended user-driven targets are:
8 # buildworld - rebuild *everything*, including glue to help do upgrades
9 # quickworld - skip the glue and do a depend+build on the meat
10 # realquickworld - skip the glue and depend stages and just build the meat
11 # crossworld - only build the glue (particularly the cross-build environment)
12 # installworld- install everything built by "buildworld"
13 # backupworld - copies /bin /sbin /usr/bin /usr/sbin /libexec to backup dir
14 # restoreworld- installs binaries from backup dir to world
15 # most - build user commands, no libraries or include files
16 # installmost - install user commands, no libraries or include files
18 # Standard targets (not defined here) are documented in the makefiles in
19 # /usr/share/mk. These include:
20 # obj depend all install clean cleandepend cleanobj
22 # Put initial settings here.
25 # We must do share/info early so that installation of info `dir'
26 # entries works correctly. Do it first since it is less likely to
27 # grow dependencies on include and lib than vice versa.
28 .if exists(${.CURDIR}/share/info)
32 # We must do include and lib early so that the perl *.ph generation
33 # works correctly as it uses the header files installed by this.
34 .if exists(${.CURDIR}/include)
37 .if exists(${.CURDIR}/lib)
40 # This exists simply to ensure that the obj dir hierarchy is
41 # intact for nrelease, allowing the nrelease Makefile's to
42 # reference ${.OBJDIR}.
44 .if exists(${.CURDIR}/nrelease)
48 .if exists(${.CURDIR}/bin)
51 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
54 .if exists(${.CURDIR}/gnu)
57 .if exists(${.CURDIR}/libexec)
60 .if exists(${.CURDIR}/sbin)
63 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
66 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
69 .if exists(${.CURDIR}/sys)
72 .if exists(${.CURDIR}/usr.bin)
75 .if exists(${.CURDIR}/usr.sbin)
79 .if exists(${.CURDIR}/etc)
83 # These are last, since it is nice to at least get the base system
84 # rebuilt before you do them.
85 .if defined(LOCAL_DIRS)
86 .for _DIR in ${LOCAL_DIRS}
87 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
93 .if defined(SUBDIR_OVERRIDE)
94 SUBDIR= ${SUBDIR_OVERRIDE}
97 .if defined(NOCLEANDIR)
98 CLEANDIR= clean cleandepend
103 .if defined(NO_CLEAN)
107 # Object directory base in primary make. Note that when we rerun make
108 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
109 # subdirectory because the rest of the build system needs it that way.
110 # The original object directory base is saved in OBJTREE.
112 MAKEOBJDIRPREFIX?= /usr/obj
113 OBJTREE?= ${MAKEOBJDIRPREFIX}
115 # Used for stage installs and pathing
117 DESTDIRBASE?= ${OBJTREE}${.CURDIR}
119 # Remove DESTDIR from MAKEFLAGS. It is present in the environment
120 # anyhow, and we need to be able to override it for stage installs
121 .MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
123 # This section sets the tools used to build the world/kernel
126 WORLD_BINUTILSVER?= binutils222
128 # Set the backup parameters if they are not already defined
130 WORLD_BACKUP?= /var/backups/world_binaries
132 .if exists(${WORLD_BACKUP}/lastbackup)
133 BK_REFERENCE!= date +'%s'
134 BK_EXPIRES!= expr ${DAYS_BACKUP} \* 86400 + `cat ${WORLD_BACKUP}/lastbackup`
135 . if ${BK_REFERENCE} > ${BK_EXPIRES}
142 # temporary until everybody has converted to x86_64
143 .if ${MACHINE_ARCH} == "amd64"
145 .if defined(.PARSEDIR)
148 # LEGACY MAKE - REMOVE FOR DFLY 3.6
149 .makeenv MACHINE_ARCH
153 TARGET_ARCH?= ${MACHINE_ARCH}
154 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
157 TARGET?= ${TARGET_ARCH}
160 BUILD_ARCH!= sysctl -n hw.machine_arch
162 # temporary until everybody has converted to x86_64
163 .if ${BUILD_ARCH} == "amd64"
167 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
168 .error To cross-build, set TARGET_ARCH.
172 # Backwards compatibility with older make's or older sys.mk's. make
173 # is expected to define MACHINE_PLATFORM.
175 .if !defined(MACHINE_PLATFORM)
176 MACHINE_PLATFORM= pc32
179 # XXX this is ugly and we need to come up with a nicer solution
180 .if !defined(TARGET_PLATFORM)
181 .if ${TARGET_ARCH} == "i386"
182 TARGET_PLATFORM= pc32
183 .elif ${TARGET_ARCH} == "x86_64"
184 TARGET_PLATFORM= pc64
186 .error Unknown target architecture.
190 THREAD_LIB?= thread_xu
191 .if ${THREAD_LIB} == "c_r"
192 .if defined(NO_LIBC_R)
193 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
197 # BTOOLS (Natively built) All non-cross-development tools that the
198 # main build needs. This includes things like 'mkdir' and 'rm'.
199 # We will not use the native system's exec path once we start
200 # on WORLD. (bootstrap-tools and build-tools or BTOOLS)
202 # CTOOLS (Natively built) Cross development tools which are specific
203 # to the target architecture.
205 # WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
208 # MACHINE_PLATFORM Platform Architecture we are building on
209 # MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
210 # MACHINE_ARCH Cpu Architecture we are building on
212 # TARGET_PLATFORM Platform Architecture we are building for
213 # TARGET Machine Architecture we are building for
214 # TARGET_ARCH Cpu Architecture we are building for
216 BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
217 CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
218 WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
220 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
221 # cross-tools stages to augment the existing command path to access newer
222 # versions of certain utilities such as 'patch' that the cross-tools stage
225 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
227 # The strict temporary command path contains all binaries required
228 # by the buildworld system after the cross-tools stage.
230 STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/pkg/bin
236 # Building a world goes through the following stages
238 # 1. bootstrap-tool stage [BMAKE]
239 # This stage is responsible for creating programs that
240 # are needed for backward compatibility reasons. They
241 # are not built as cross-tools.
242 # 2. build-tool stage [TMAKE]
243 # This stage is responsible for creating the object
244 # tree and building any tools that are needed during
246 # 3. cross-tool stage [XMAKE]
247 # This stage is responsible for creating any tools that
248 # are needed for cross-builds. A cross-compiler is one
250 # 4. world stage [WMAKE]
251 # This stage actually builds the world.
252 # 5. install stage (optional) [IMAKE]
253 # This stage installs a previously built world.
255 # In all cases we must carefully adjust the environment so the proper
256 # tools and header files are used.
258 # NOTE: The M4 environment variable is used by the [f]lex binary to
259 # override the location of the 'm4' binary. The override is
260 # needed for certain buildworld version transitions, specifically
261 # past a certain point in 3.3 because the older /usr/bin/m4 will
262 # generate output that will blow up the newer [f]lex/yacc/bison
266 # bootstrap-tool stage
268 BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
270 DESTDIR=${BTOOLSDEST} \
271 PATH=${BTOOLSPATH}:${PATH} \
272 M4=${BTOOLSDEST}/usr/bin/m4 \
273 INSTALL="sh ${.CURDIR}/tools/install.sh"
275 BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
276 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
281 TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
284 PATH=${BTOOLSPATH}:${PATH} \
285 M4=${BTOOLSDEST}/usr/bin/m4 \
286 INSTALL="sh ${.CURDIR}/tools/install.sh"
288 TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
289 -DNO_FORTRAN -DNOSHARED
293 # note: TOOLS_PREFIX points to the obj root holding the cross
294 # compiler binaries, while USRDATA_PREFIX points to the obj root
295 # holding the target environment (and also determines where cross-built
296 # libraries, crt*.o, and include files are installed).
298 XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
300 DESTDIR=${CTOOLSDEST} \
301 INSTALL="sh ${.CURDIR}/tools/install.sh" \
302 TOOLS_PREFIX=${CTOOLSDEST} \
303 USRDATA_PREFIX=${WORLDDEST} \
304 M4=${BTOOLSDEST}/usr/bin/m4 \
305 PATH=${BTOOLSPATH}:${PATH}
307 XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
308 -DBOOTSTRAPPING -DNOSHARED
310 # world stage, note the strict path and note that TOOLS_PREFIX is left
311 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
312 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
313 # for both binary and library paths, even though it is being compiled to
314 # WORLDDEST. None of the programs in the world stage are ever actually
315 # executed during the buildworld/installworld.
317 CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
319 MACHINE_ARCH=${TARGET_ARCH} \
321 MACHINE_PLATFORM=${TARGET_PLATFORM} \
322 OBJFORMAT_PATH=${CTOOLSDEST} \
323 HOST_CCVER=${HOST_CCVER} \
324 CCVER=${WORLD_CCVER} \
325 LDVER=${WORLD_LDVER} \
326 BINUTILSVER=${WORLD_BINUTILSVER}
328 WMAKEENV= ${CROSSENV} \
329 DESTDIR=${WORLDDEST} \
330 INSTALL="sh ${.CURDIR}/tools/install.sh" \
331 M4=${BTOOLSDEST}/usr/bin/m4 \
332 PATH=${STRICTTMPPATH}
334 WMAKE= ${WMAKEENV} make -f Makefile.inc1
338 IMAKEENV= ${CROSSENV} \
339 PATH=${STRICTTMPPATH}
340 IMAKE= ${IMAKEENV} make -f Makefile.inc1
344 KMAKEENV= ${WMAKEENV}
348 # Attempt to rebuild the entire system, with reasonable chance of
349 # success, regardless of how old your existing system is.
351 _worldtmp: _cleantmp _mtreetmp
352 .ORDER: _cleantmp _mtreetmp
356 @echo "--------------------------------------------------------------"
357 @echo ">>> Rebuilding the temporary build tree"
358 @echo "--------------------------------------------------------------"
359 .if !defined(NOCLEAN)
360 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
362 # XXX - These two can depend on any header file.
363 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
364 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
368 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
369 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
370 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
371 -p ${_dir}/ > /dev/null
372 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
373 -p ${_dir}/usr > /dev/null
375 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
376 -p ${WORLDDEST}/usr/include > /dev/null
377 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
381 @echo "--------------------------------------------------------------"
382 @echo ">>> stage 1: bootstrap tools"
383 @echo "--------------------------------------------------------------"
384 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
387 @echo "--------------------------------------------------------------"
388 @echo ">>> stage 2a: cleaning up the object tree"
389 @echo "--------------------------------------------------------------"
390 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
393 @echo "--------------------------------------------------------------"
394 @echo ">>> stage 2b: rebuilding the object tree"
395 @echo "--------------------------------------------------------------"
396 cd ${.CURDIR}; ${WMAKE} par-obj
399 @echo "--------------------------------------------------------------"
400 @echo ">>> stage 2c: build tools"
401 @echo "--------------------------------------------------------------"
402 cd ${.CURDIR}; ${TMAKE} build-tools
405 @echo "--------------------------------------------------------------"
406 @echo ">>> stage 3: cross tools"
407 @echo "--------------------------------------------------------------"
408 cd ${.CURDIR}; ${XMAKE} cross-tools
411 @echo "--------------------------------------------------------------"
412 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
413 @echo "--------------------------------------------------------------"
414 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
417 @echo "--------------------------------------------------------------"
418 @echo ">>> stage 4b: building libraries"
419 @echo "--------------------------------------------------------------"
420 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
423 @echo "--------------------------------------------------------------"
424 @echo ">>> stage 4c: make dependencies"
425 @echo "--------------------------------------------------------------"
426 cd ${.CURDIR}; ${WMAKE} par-depend
429 @echo "--------------------------------------------------------------"
430 @echo ">>> stage 4d: building everything.."
431 @echo "--------------------------------------------------------------"
432 cd ${.CURDIR}; ${WMAKE} all
434 # note: buildworld no longer depends on _cleanobj because we rm -rf the
435 # entire object tree and built the bootstrap tools in a different location.
437 # buildworld - build everything from scratch
438 # quickworld - skip the bootstrap, build, and cross-build steps
439 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
441 # note: we include _obj in realquickworld to prevent accidental creation
442 # of files in /usr/src.
445 .if !defined(SUBDIR_OVERRIDE)
446 WMAKE_TGTS+= _worldtmp _bootstrap-tools
448 WMAKE_TGTS+= _obj _build-tools
449 .if !defined(SUBDIR_OVERRIDE)
450 WMAKE_TGTS+= _cross-tools
452 WMAKE_TGTS+= _includes _libraries _depend everything
454 buildworld: ${WMAKE_TGTS}
456 quickworld: _mtreetmp _obj _includes _libraries _depend everything
458 realquickworld: _mtreetmp _obj _includes _libraries everything
460 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
462 .ORDER: ${WMAKE_TGTS}
463 .ORDER: _obj _includes
464 .ORDER: _mtreetmp _obj
469 # Checks to be sure system is ready for installworld
472 .if !defined(NO_SENDMAIL)
473 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
474 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
476 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
477 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
478 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
479 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
480 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac
485 # Installs everything compiled by a 'buildworld'.
487 installworld: installcheck
488 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
489 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
494 # If you have a build server, you can NFS mount the source and obj directories
495 # and do a 'make reinstall' on the *client* to install new binaries from the
496 # most recent server build.
499 @echo "--------------------------------------------------------------"
500 @echo ">>> Making hierarchy"
501 @echo "--------------------------------------------------------------"
502 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
504 @echo "--------------------------------------------------------------"
505 @echo ">>> Installing everything.."
506 @echo "--------------------------------------------------------------"
507 cd ${.CURDIR}; make -f Makefile.inc1 install
510 # buildkernel, nativekernel, quickkernel, and installkernel
512 # Which kernels to build and/or install is specified by setting
513 # KERNCONF. If not defined a GENERIC kernel is built/installed.
514 # Only the existing (depending TARGET) config files are used
515 # for building kernels and only the first of these is designated
516 # as the one being installed.
518 # You can specify INSTALLSTRIPPED=1 if you wish the installed
519 # kernel and modules to be stripped of its debug info (required
520 # symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
521 # if you only want to strip the modules of their debug info. These
522 # only apply if you have DEBUG=-g in your kernel config or make line.
524 # Note that we have to use TARGET instead of TARGET_ARCH when
525 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
526 # be set to cross-build, we have to make sure TARGET is set
529 .if !defined(KERNCONF) && defined(KERNEL)
533 # XXX makeshift fix to build the right kernel for the (target) architecture
534 # We should configure this in the platform files somehow
535 .if ${TARGET_ARCH} == "i386"
538 KERNCONF?= X86_64_GENERIC
541 INSTKERNNAME?= kernel
543 KRNLSRCDIR= ${.CURDIR}/sys
544 KRNLCONFDIR= ${KRNLSRCDIR}/config
545 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
546 KERNCONFDIR?= ${KRNLCONFDIR}
550 .for _kernel in ${KERNCONF}
551 .if exists(${KERNCONFDIR}/${_kernel})
552 BUILDKERNELS+= ${_kernel}
553 .if empty(INSTALLKERNEL)
554 INSTALLKERNEL= ${_kernel}
559 # kernel version numbers survive rm -rf
561 .for _kernel in ${BUILDKERNELS}
562 .if exists(${KRNLOBJDIR}/${_kernel}/version)
563 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
570 # Builds all kernels defined by BUILDKERNELS.
573 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
574 echo "You must buildworld before buildkernel. If you wish"; \
575 echo "to build a kernel using native tools, config it manually"; \
576 echo "or use the nativekernel target if you are in a rush"; \
581 .for _kernel in ${BUILDKERNELS}
582 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
583 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
584 echo "The kernel was build using buildworld tools which no" ; \
585 echo "longer appear to exist, quickkernel failed!" ; \
592 .if empty(BUILDKERNELS)
593 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
594 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
599 .if defined(KERNWARN)
600 @echo "--------------------------------------------------------------"
601 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
602 @echo "--------------------------------------------------------------"
607 # The buildkernel target rebuilds the specified kernels from scratch
608 # using the crossbuild tools generated by the last buildworld. It is
609 # the safest (but also the most time consuming) way to build a new kernel.
611 buildkernel: bk_tools bk_build_list bk_kernwarn
612 .for _kernel in ${BUILDKERNELS}
613 @echo "--------------------------------------------------------------"
614 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
615 @echo "--------------------------------------------------------------"
616 @echo "===> ${_kernel}"
617 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
618 rm -rf ${KRNLOBJDIR}/${_kernel}
620 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
621 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
622 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
624 mkdir -p ${KRNLOBJDIR}
625 .if !defined(NO_KERNELCONFIG)
627 PATH=${STRICTTMPPATH} \
628 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
629 ${KERNCONFDIR}/${_kernel}
631 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
632 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
634 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
635 .if !defined(NO_KERNELDEPEND)
636 cd ${KRNLOBJDIR}/${_kernel}; \
637 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
639 cd ${KRNLOBJDIR}/${_kernel}; \
640 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
641 @echo "--------------------------------------------------------------"
642 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
643 @echo "--------------------------------------------------------------"
646 # The nativekernel target rebuilds the specified kernels from scratch
647 # using the system's standard compiler rather than using the crossbuild
648 # tools generated by the last buildworld. This is fairly safe if your
649 # system is reasonable up-to-date.
651 nativekernel: bk_build_list bk_kernwarn
652 .for _kernel in ${BUILDKERNELS}
653 @echo "--------------------------------------------------------------"
654 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
655 @echo "--------------------------------------------------------------"
656 @echo "===> ${_kernel}"
657 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
658 rm -rf ${KRNLOBJDIR}/${_kernel}
660 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
661 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
662 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
664 mkdir -p ${KRNLOBJDIR}
665 .if !defined(NO_KERNELCONFIG)
667 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
668 ${KERNCONFDIR}/${_kernel}
670 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
671 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
673 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
674 cd ${KRNLOBJDIR}/${_kernel}; \
675 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
676 make -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
677 .if !defined(NO_KERNELDEPEND)
678 cd ${KRNLOBJDIR}/${_kernel}; \
679 make KERNEL=${INSTKERNNAME} depend
681 cd ${KRNLOBJDIR}/${_kernel}; \
682 make KERNEL=${INSTKERNNAME} all
683 @echo "--------------------------------------------------------------"
684 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
685 @echo "--------------------------------------------------------------"
688 # The quickkernel target rebuilds the specified kernels as quickly
689 # as possible. It will use the native tools or the buildworld cross tools
690 # based on whether the kernel was originally generated via buildkernel or
691 # nativekernel. Config is rerun but the object hierarchy is not rebuilt,
692 # nor is the make depend step run.
694 quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
695 .for _kernel in ${BUILDKERNELS}
696 @echo "--------------------------------------------------------------"
697 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
698 @echo "--------------------------------------------------------------"
699 @echo "===> ${_kernel}"
700 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
701 .if !defined(NO_KERNELCONFIG)
703 PATH=${STRICTTMPPATH} \
704 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
705 ${KERNCONFDIR}/${_kernel}
707 cd ${KRNLOBJDIR}/${_kernel}; \
708 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
710 .if !defined(NO_KERNELCONFIG)
712 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
713 ${KERNCONFDIR}/${_kernel}
715 cd ${KRNLOBJDIR}/${_kernel}; \
716 make KERNEL=${INSTKERNNAME} all
718 @echo "--------------------------------------------------------------"
719 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
720 @echo "--------------------------------------------------------------"
726 # Install the kernel defined by INSTALLKERNEL
728 installkernel reinstallkernel:
729 @echo "--------------------------------------------------------------"
730 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
731 @echo "--------------------------------------------------------------"
732 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
733 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
734 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
736 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
737 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
743 # Build most of the user binaries on the existing system libs and includes.
746 @echo "--------------------------------------------------------------"
747 @echo ">>> Building programs only"
748 @echo "--------------------------------------------------------------"
749 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
750 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ all
756 # Install the binaries built by the 'most' target. This does not include
757 # libraries or include files.
760 @echo "--------------------------------------------------------------"
761 @echo ">>> Installing programs only"
762 @echo "--------------------------------------------------------------"
763 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
764 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ install
768 # ------------------------------------------------------------------------
770 # From here onwards are utility targets used by the 'make world' and
771 # related targets. If your 'world' breaks, you may like to try to fix
772 # the problem and manually run the following targets to attempt to
773 # complete the build. Beware, this is *not* guaranteed to work, you
774 # need to have a pretty good grip on the current state of the system
775 # to attempt to manually finish it. If in doubt, 'make world' again.
778 # bootstrap-tools: Build all tools required to build all tools. Note that
779 # order is important in a number of cases and also note that the bootstrap
780 # and build tools stages have access to earlier binaries they themselves
783 # patch: older patch's do not have -i. This program must be built
784 # first so other bootstrap tools that need to apply patches
786 # [x]install: dependancies on various new install features
787 # rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
788 # envs are not compatible with older objformat binaries.
790 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
791 _strfile= games/fortune/strfile
794 # BSTRAPDIRS1 - must be built in strict order, no parallelism
796 # order is very important. yacc before m4 before flex. flex exec's m4,
797 # m4's parser file needs the latest byacc (insanity!).
799 BSTRAPDIRS1= ${_strfile} \
801 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
802 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
803 bin/hostname bin/kill \
804 usr.bin/yacc usr.bin/m4 usr.bin/colldef \
805 usr.bin/uudecode usr.bin/xinstall \
806 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
807 usr.bin/find usr.bin/flex
809 # BSTRAPDIRS2 - may built in parallel
812 usr.bin/sed usr.bin/uname usr.bin/touch \
813 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
814 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
815 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
816 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
817 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
818 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
819 usr.bin/tail usr.bin/unifdef usr.bin/tic \
820 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
821 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
822 gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
823 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
825 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
826 touch ${BTOOLSDEST}/.bootstrap_done
828 bootstrap-tools-before:
829 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
831 bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
833 bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
835 .ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
837 .ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
839 .for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
841 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
842 cd ${.CURDIR}/${_tool}; \
843 make DIRPRFX=${_tool}/ obj; \
844 make DIRPRFX=${_tool}/ depend; \
845 make DIRPRFX=${_tool}/ all; \
846 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
849 # build-tools: Build special purpose build tools.
851 # XXX we may be able to remove or consolidate this into bootstrap-tools
852 # now that we have the native helper (.nx/.no) infrastructure.
854 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
855 _share= share/syscons/scrnmaps
858 _gcc_common_cross= gnu/usr.bin/gmp gnu/usr.bin/mpfr
859 .if !defined(NO_GCC44)
860 _gcc44_cross= gnu/usr.bin/cc44
861 _gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
863 _gcc47_cross= lib/libz gnu/usr.bin/mpc gnu/usr.bin/cc47
864 _gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
865 _custom_cross= libexec/customcc
866 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
868 BTOOLSDIRS= ${_gcc44_tools} ${_gcc47_tools} ${_share}
870 build-tools: build-tools-targets
871 touch ${BTOOLSDEST}/.build_done
873 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
875 .ORDER: ${_gcc44_tools:S/^/btools-/}
876 .ORDER: ${_gcc47_tools:S/^/btools-/}
878 .for _tool in ${BTOOLSDIRS}
880 ${ECHODIR} "===> ${_tool} (build-tools)"; \
881 cd ${.CURDIR}/${_tool}; \
882 make DIRPRFX=${_tool}/ obj; \
883 make DIRPRFX=${_tool}/ depend; \
884 make DIRPRFX=${_tool}/ all; \
885 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
889 # cross-tools: Build cross-building tools
891 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
892 _btxld= usr.sbin/btxld
895 CTOOLSDIRS= ${_btxld} ${_binutils} usr.bin/objformat ${_gcc_common_cross} \
896 ${_gcc44_cross} ${_gcc47_cross} ${_custom_cross}
898 cross-tools: cross-tools-targets
899 touch ${CTOOLSDEST}/.cross_done
901 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
903 .for _tool in ${CTOOLSDIRS}
905 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
906 cd ${.CURDIR}/${_tool}; \
907 make DIRPRFX=${_tool}/ obj; \
908 make DIRPRFX=${_tool}/ depend; \
909 make DIRPRFX=${_tool}/ all; \
910 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
914 # hierarchy - ensure that all the needed directories are present
917 cd ${.CURDIR}/etc; make distrib-dirs
920 # libraries - build all libraries, and install them under ${DESTDIR}.
922 # The list of libraries with dependents (${_prebuild_libs}) and their
923 # interdependencies (__L) are built automatically by the
924 # ${.CURDIR}/tools/make_libdeps.sh script.
926 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
927 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
931 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
932 make -f Makefile.inc1 _startup_libs47;
933 .if !defined(NO_GCC44)
935 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
936 make -f Makefile.inc1 _startup_libs44;
939 make -f Makefile.inc1 _startup_libs; \
940 make -f Makefile.inc1 _prebuild_libs; \
941 make -f Makefile.inc1 _generic_libs;
942 touch ${WORLDDEST}/.libraries_done
944 # These dependencies are not automatically generated:
946 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
947 # shared libraries for ELF. The target for _startup_libsXX is
948 # specifically built using gccXX.
950 _startup_libs47= gnu/usr.bin/cc47/cc_prep \
951 gnu/usr.bin/cc47/cc_tools \
953 gnu/lib/gcc47/libgcc \
954 gnu/lib/gcc47/libgcc_eh \
955 gnu/lib/gcc47/libgcc_pic
956 _startup_libs44= gnu/usr.bin/cc44/cc_prep \
957 gnu/usr.bin/cc44/cc_tools \
960 _startup_libs= lib/csu lib/libc lib/libc_rtld
962 _prebuild_libs= lib/libbz2 lib/liblzma lib/libz
963 _prebuild_libs+= lib/libutil
965 _generic_libs= gnu/lib
967 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
968 lib/libncurses/libncurses lib/libopie lib/libradius \
969 lib/libsbuf lib/libtacplus lib/libm \
970 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
971 lib/libpthread lib/libprop lib/libdevattr
973 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
977 .if !defined(NO_CRYPT)
978 .if !defined(NO_OPENSSL)
979 _prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
980 .if !defined(NO_OPENSSH)
981 _prebuild_libs+= secure/lib/libssh
982 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
985 _generic_libs+= secure/lib
988 _generic_libs+= usr.bin/flex/lib
990 .for _lib in ${_startup_libs44} ${_startup_libs47} \
991 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
993 .if exists(${.CURDIR}/${_lib})
994 ${ECHODIR} "===> ${_lib}"; \
995 cd ${.CURDIR}/${_lib}; \
996 make DIRPRFX=${_lib}/ depend; \
997 make DIRPRFX=${_lib}/ all; \
998 make DIRPRFX=${_lib}/ install
1002 _startup_libs: ${_startup_libs:S/$/__L/}
1003 _startup_libs47: ${_startup_libs47:S/$/__L/}
1004 _startup_libs44: ${_startup_libs44:S/$/__L/}
1005 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
1006 _generic_libs: ${_generic_libs:S/$/__L/}
1008 # library targets must be ordered because there are inter-library
1009 # races (e.g. generation of tconfig.h)
1011 .ORDER: ${_startup_libs47:S/$/__L/}
1012 .ORDER: ${_startup_libs44:S/$/__L/}
1013 .ORDER: ${_startup_libs:S/$/__L/}
1014 .ORDER: ${_prebuild_libs:S/$/__L/}
1015 .ORDER: ${_generic_libs:S/$/__L/}
1017 .for __target in clean cleandepend cleandir obj depend includes
1018 .for entry in ${SUBDIR}
1019 ${entry}.${__target}__D: .PHONY
1020 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1021 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1022 edir=${entry}.${MACHINE_ARCH}; \
1023 cd ${.CURDIR}/$${edir}; \
1025 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1027 cd ${.CURDIR}/$${edir}; \
1029 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1031 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1032 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
1034 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1036 # The wmake target is used by /usr/bin/wmake to run make in a
1037 # world build environment.
1040 @echo '${WMAKEENV} make ${WMAKE_ARGS}'
1043 @echo '${WMAKEENV} /bin/sh'
1046 @echo '${BMAKEENV} make ${BMAKE_ARGS}'
1049 @echo '${BMAKEENV} /bin/sh'
1052 @echo '${TMAKEENV} make ${TMAKE_ARGS}'
1055 @echo '${TMAKEENV} /bin/sh'
1058 @echo '${XMAKEENV} make ${XMAKE_ARGS}'
1061 @echo '${XMAKEENV} /bin/sh'
1064 @mkdir -p ${WORLD_BACKUP}
1065 @chflags -R noschg ${WORLD_BACKUP}
1066 @rm -rf ${WORLD_BACKUP}/sbin ${WORLD_BACKUP}/bin \
1067 ${WORLD_BACKUP}/usr.sbin ${WORLD_BACKUP}/usr.bin \
1068 ${WORLD_BACKUP}/usr.libexec
1069 cp -a /sbin ${WORLD_BACKUP}/sbin
1070 cp -a /bin ${WORLD_BACKUP}/bin
1071 cp -a /usr/sbin ${WORLD_BACKUP}/usr.sbin
1072 cp -a /usr/bin ${WORLD_BACKUP}/usr.bin
1073 cp -a /usr/libexec ${WORLD_BACKUP}/usr.libexec
1074 @date +'%s' > ${WORLD_BACKUP}/lastbackup
1077 .if !(exists(${WORLD_BACKUP}/sbin) && exists(${WORLD_BACKUP}/bin) && \
1078 exists(${WORLD_BACKUP}/usr.sbin) && exists(${WORLD_BACKUP}/usr.bin) && \
1079 exists(${WORLD_BACKUP}/usr.libexec))
1080 @echo "There does not seem to be a valid archive present."
1082 @echo "Restoring system binaries from backup archive..."
1084 .for BX in sbin bin usr.sbin usr.bin usr.libexec
1085 @chflags -R noschg /${BX:S/./\//}
1086 @cd ${WORLD_BACKUP}/${BX} && find * -type f -perm +700 -exec \
1087 echo cp ${WORLD_BACKUP}/${BX}/{} /${BX:S/./\//}/{} >> /tmp/rs.tmp \;
1089 @grep -Ev ' (/bin/sh|/bin/cp|/sbin/init.bak|/usr/bin/make|/usr/libexec/ld-elf.so.2|/usr/libexec/ld-elf.so.2.old)$$' \
1090 /tmp/rs.tmp > /tmp/restore.script
1091 @/bin/sh /tmp/restore.script
1092 @rm /tmp/rs.tmp /tmp/restore.script
1093 @echo "These files were not restored from ${WORLD_BACKUP}:"
1096 @echo " /usr/bin/make"
1097 @echo " /usr/libexec/ld-elf.so.2"
1100 # Take advantage of bmake error response
1102 MAKE_PRINT_VAR_ON_ERROR= \
1117 .include <bsd.subdir.mk>