3 # Copyright (c) 1990 The Regents of the University of California.
6 # Written and contributed by W. Jolitz 12/90
8 # Redistribution and use in source and binary forms are permitted provided
9 # that: (1) source distributions retain this entire copyright notice and
10 # comment, and (2) distributions including binaries display the following
11 # acknowledgement: ``This product includes software developed by the
12 # University of California, Berkeley and its contributors'' in the
13 # documentation or other materials provided with the distribution and in
14 # all advertising materials mentioning features or use of this software.
15 # Neither the name of the University nor the names of its contributors may
16 # be used to endorse or promote products derived from this software without
17 # specific prior written permission.
18 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
19 # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
20 # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
22 # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
23 # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.57 2003/02/10 11:35:53 simokawa Exp $
24 # $DragonFly: src/etc/MAKEDEV,v 1.6 2004/03/10 18:16:14 dillon Exp $
26 # Device "make" file. Valid arguments:
27 # all makes all known devices, standard number of units (or close)
28 # std standard devices
29 # jail suitable for a jail(8)
30 # local configuration specific devices
31 # mach-4 mach4&lites+devices for Mach's XFree86 distribution
32 # (see http://www.cs.hut.fi/lites.html for more info on LITES)
35 # ast* ATAPI tape drives
36 # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
37 # sa* SCSI Sequential Access Devices
40 # aac* Adaptec FSA RAID controllers
41 # aacd* Adaptec FSA RAID
42 # acd* ATAPI CD-ROM disks
44 # afd* ATAPI floppy disks
46 # cd* SCSI CD-ROM disks
47 # da* SCSI Direct Access Devices
48 # fd* floppy disk drives (3 1/2", 5 1/4")
49 # fla* M-Systems DiskOnChip
50 # idad* Compaq Smart-2 RAID arrays
51 # ips* IBM ServeRAID controller
53 # mcd* Mitsumi CD-ROM disks
54 # md* Memory (or malloc) disk
55 # mlx* Mylex DAC960 RAID controllers
56 # mlxd* Mylex DAC960 RAID disk volumes
57 # pst* Promise SuperTrak RAID disks
58 # scd* Sony CD-ROM disks
62 # vty* virtual console devices for syscons/pcvt/codrv
65 # mse* Logitech and ATI Inport bus mouse
67 # jogdial Sony VAIO Jogdial
68 # sysmouse Mousesystems mouse emulator for syscons
71 # refclock-* serial ports used by xntpd parse refclocks
74 # tty* general purpose serial ports
75 # cua* dialout serial ports
76 # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
77 # cuaA* Specialix SI/XIO dialout ports
78 # ttyD* Digiboard - 16 dialin ports
79 # cuaD* Digiboard - 16 dialout ports
80 # ttyE* Stallion EasyIO (stl) dialin ports
81 # cuaE* Stallion EasyIO (stl) dialout ports
82 # ttyF* Stallion Brumby (stli) dialin ports
83 # cuaF* Stallion Brumby (stli) dialout ports
84 # ttyR* Rocketport dialin ports
85 # cuaR* Rocketport dialout ports
87 # stlN Stallion EasyIO board N dialin and dialout
88 # stliN Stallion Brumby board N dialin and dialout
91 # pty* set of 32 master and slave pseudo terminals
92 # vty* virtual terminals using syscons/pcvt/codrv console
96 # ppi* Parallel port i/o
97 # pps* Pulse per second timing interface
98 # pcfclock* Parallel time sync interface
105 # usb* USB bus control device
106 # ucom* USB serial devices
107 # ugen* generic USB device
108 # uhid* Human Interface Device (HID)
112 # urio* Diamond Rio 500
113 # uscanner* USB scanners
115 # SCSI devices (other than CD-ROM, tape and disk):
116 # ch* SCSI Media-Changer (juke box) driver
117 # pt* Processor Type (HP scanner, as one example)
118 # pass* CAM Passthrough device
119 # ses* SES (SCSI Environmental Services) and
120 # SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
122 # PC-CARD (previously called PCMCIA) support
123 # card* PC-CARD slots
126 # i4b isdnd call control device
127 # i4bctl debugging control device
128 # i4btrc* trace data interface(s), one per passive card
129 # i4btel* telephony interface(s)
130 # i4bteld* telephony dialout interface(s)
131 # i4brbch* raw b channel access device(s)
133 # Special purpose devices:
134 # apm Advanced Power Management BIOS
135 # apmctl APM BIOS control device
137 # crypto crypto interface
139 # tw* xten power controller
140 # snd* various sound cards
141 # pcaudio PCM audio driver
142 # socksys iBCS2 socket system driver
143 # vat VAT compatibility audio driver (requires snd*)
144 # gsc Genius GS-4500 hand scanner
146 # tun* Tunneling IP device
147 # tap* Ethernet Tunneling device
148 # snp* tty snoop devices
149 # spigot Video Spigot video acquisition card
150 # ctx* Cortex-I video acquisition card
151 # meteor* Matrox Meteor video acquisition card (pci)
152 # bktr* Bt848 based video acquisition card (pci)
153 # labpc* National Instrument's Lab-PC and LAB-PC+
154 # perfmon CPU performance-monitoring counters
155 # pci PCI configuration-space access from user mode
156 # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
157 # kbd keyboard devices
158 # elan-mmcr AMD Elan support (e.g. mmap MMCR)
159 # agpgart AGP interface
160 # cfs* Coda Distributed Filesystem
161 # nsmb* SMB/CIFS protocol interface
164 if [ -n "$MAKEDEVPATH" ]; then
171 # Usage: die exitcode msg
177 # Convert integer to partition name
182 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
183 8) p=i;; 9) p=j;; 10) p=k;; 11) p=l;; 12) p=m;; 13) p=n;; 14) p=o;; 15) p=p;;
189 # Convert integer to slice name
201 # Convert disk (type, unit, slice, partition) to minor number
204 echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | ($4 & 7) | ($4 & 8) << 17))
207 # Override mknod(2) to add extra handling to it.
209 for i in `IFS=':'; echo $PATH`; do
210 if [ -x "${i}/mknod" ]; then
218 4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";;
219 5) "$mknod" "$@" || die 2 "$mknod $@ failed";;
220 *) die 2 "bad node: mknod $@";;
224 # Convert tape (ctrl, unit, mode, access) to minor number
227 echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
230 # Convert the last character of a tty name to a minor number.
235 a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
236 h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
237 o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
244 # Convert a unit number to a minor number.
247 echo $(((($1 >> 8) << 16) | ($1 % 256)))
250 # For the stallion devices tty[EF]
251 # stallion major letter card iscallout
264 if [ $iscallout -gt 0 ]; then
272 *) die 1 "Invalid stl card number $card";;
275 # make the mem interface for extracting stats & loading microcode.
276 # 0x1000000 + card number
277 mknod staliomem$card c $major 0x0100000$card
279 while [ $port -lt $maxport ]; do
280 minor=$(($minorbase + $card * 1048576 + $port))
281 if [ $port -ge 32 ]; then
282 minor=$(($minor + 65504))
284 unit=$(($card * 64 + $port))
286 mknod ${pref}${letter}$unit c $major $minor $owner
287 mknod ${pref}i${letter}$unit c $major $(($minor + 32)) $owner
288 mknod ${pref}l${letter}$unit c $major $(($minor + 64)) $owner
293 # Raw partition for disks
296 # Compatibility slice for disks
299 # Raw slice for disks
303 disk_umask=037 # allow group operator to read disks
304 tape_umask=017 # allow group operator to read/write tapes
310 sh MAKEDEV std # standard
311 sh MAKEDEV fd0 fd1 # bdev, floppy disk
312 sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk
313 sh MAKEDEV ata # cdev, ATA control
314 sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk
315 sh MAKEDEV ar0 ar1 # bdev, ATA RAID disk
316 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
317 sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk
318 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
319 sh MAKEDEV vn0 # bdev, virtual disk
320 sh MAKEDEV cd0 mcd0 scd0 # bdev, cdrom
321 sh MAKEDEV sa0 wt0 # bdev, tape
322 sh MAKEDEV vty12 # cdev, virtual tty
323 sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
324 sh MAKEDEV pty0 # cdev, pseudo tty
325 sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
326 sh MAKEDEV zs0 # big-Alpha serial tty
327 sh MAKEDEV kbd0 kbd1 # cdev, keyboard
328 sh MAKEDEV mse0 psm0 jogdial sysmouse # cdev, mouse
329 sh MAKEDEV pcaudio speaker snd0 # cdev, noise
330 sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
331 sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
332 sh MAKEDEV iic0 iic1 # cdev, I2C device
333 sh MAKEDEV smb0 smb1 # cdev, SMBus device
334 sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
335 sh MAKEDEV usb1 uhid1 ums1 ulpt1 ugen1 # cdev, USB devices
336 sh MAKEDEV urio0 uscanner0 umodem0 # cdev, USB devices too
337 sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
338 sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
339 sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network
340 sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
341 sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
342 sh MAKEDEV pass4 xpt2 # cdev, CAM
343 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
344 sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
345 sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
346 sh MAKEDEV agpgart # cdev, AGP
347 sh MAKEDEV nsmb0 # cdev, SMB/CIFS
348 sh MAKEDEV crypto # cdev, crypto
349 sh MAKEDEV fw0 fw1 fw2 fw3 fwmem0 # cdev, firewire
352 # a much restricted set of the above, to save precious i-nodes on the
355 sh MAKEDEV std # standard
356 sh MAKEDEV fd0 # bdev, floppy disk
357 sh MAKEDEV da0 # bdev, SCSI disk
358 sh MAKEDEV ad0 # bdev, ATA disk
359 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
360 sh MAKEDEV wd0 # bdev, OLD disk
361 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
362 sh MAKEDEV vn0 # bdev, virtual disk
363 sh MAKEDEV cd0 # bdev, cdrom
364 sh MAKEDEV sa0 # bdev, tape
365 sh MAKEDEV vty2 # cdev, virtual tty
366 sh MAKEDEV cuaa0 # cdev, serial tty
367 sh MAKEDEV pty0 # cdev, pseudo tty
368 sh MAKEDEV ttyd0 # cdev, serial tty
369 sh MAKEDEV zs0 # big-Alpha serial tty
370 sh MAKEDEV kbd0 # cdev, keyboard
371 sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
372 sh MAKEDEV lpt0 # cdev, printer
373 sh MAKEDEV ppi0 # cdev, parallel port
374 sh MAKEDEV iic0 # cdev, I2C device
375 sh MAKEDEV smb0 # cdev, SMBus device
376 sh MAKEDEV ums0 # cdev, USB devices
377 sh MAKEDEV tun0 # cdev, network
378 sh MAKEDEV tap0 # cdev, network
379 sh MAKEDEV ch0 # cdev, miscellaneous
380 sh MAKEDEV apm apmctl card0 # cdev, laptop
381 sh MAKEDEV pass1 xpt1 # cdev, CAM
382 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
383 sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN
384 sh MAKEDEV i4brbch0 # cdev, ISDN
389 mknod console c 0 0; chmod 600 console
390 mknod kmem c 2 1 root:kmem; chmod 640 kmem
391 mknod mem c 2 0 root:kmem; chmod 640 mem
392 mknod null c 2 2; chmod 666 null
393 mknod random c 2 3; chmod 644 random
394 mknod urandom c 2 4; chmod 644 urandom
395 mknod zero c 2 12; chmod 666 zero
396 mknod io c 2 14; chmod 600 io
397 mknod tty c 1 0; chmod 666 tty
398 mknod klog c 7 0; chmod 600 klog
399 mknod stdin c 22 0; chmod 666 stdin
400 mknod stdout c 22 1; chmod 666 stdout
401 mknod stderr c 22 2; chmod 666 stderr
402 mknod pci c 78 0; chmod 644 pci
405 while [ $i -lt 64 ]; do
416 rm mem kmem pci io klog console # for security
417 ln -sf null mem # for libkvm (ab)users
418 ln -sf null kmem # --//--
427 mknod timezone c 26 0
430 # Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
433 u=`expr $i : '..\(.*\)'`
434 if [ -z "${u}" ]; then u=0; fi
435 # default density, 512b blocks
436 mknod rwt${u} c 10 $(( 0 + $u)) root:operator
437 mknod nrwt${u} c 10 $(( 4 + $u)) root:operator
438 # default density, 1024b blocks
439 # mknod rWt${u} c 10 $((64 + $u)) root:operator
440 # mknod nrWt${u} c 10 $((68 + $u)) root:operator
441 mknod rwt${u}b c 10 $((16 + $u)) root:operator # 60 megabytes
442 mknod nrwt${u}b c 10 $((20 + $u)) root:operator
443 mknod rwt${u}c c 10 $((24 + $u)) root:operator # 120 megabytes
444 mknod nrwt${u}c c 10 $((28 + $u)) root:operator
445 mknod rwt${u}d c 10 $((32 + $u)) root:operator # 150 megabytes
446 mknod nrwt${u}d c 10 $((36 + $u)) root:operator
447 # mknod rwt${u}e c 10 $((40 + $u)) root:operator # 300 megabytes?
448 # mknod nrwt${u}e c 10 $((44 + $u)) root:operator
449 # mknod rwt${u}f c 10 $((48 + $u)) root:operator # 600 megabytes?
450 # mknod nrwt${u}f c 10 $((52 + $u)) root:operator
455 aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|ipsd*s*|md*s*|mlxd*s*|pst*s*|twed*s*|vn*s*|wd*s*|wfd*s*)
458 aacd*s*) name=aacd; chr=151;;
459 ad*s*) name=ad; chr=116;;
460 ar*s*) name=ar; chr=157;;
461 afd*s*) name=afd; chr=118;;
462 amrd*s*) name=amrd; chr=133;;
463 da*s*) name=da; chr=13;;
464 fla*s*) name=fla; chr=102;;
465 idad*s*) name=idad; chr=109;;
466 ipsd*s*) name=ipsd; chr=176;;
467 md*s*) name=md; chr=95;;
468 mlxd*s*) name=mlxd; chr=131;;
469 pst*s*) name=pst; chr=168;;
470 twed*s*) name=twed; chr=147;;
471 vn*s*) name=vn; chr=43;;
472 wd*s*) name=wd; chr=3;;
473 wfd*s*) name=wfd; chr=87;;
476 aacd*s*|amrd*s*|idad*s*|ipsd*s*|mlxd*s*|twed*s*)
477 unit=`expr $i : '....\([0-9]*\)s'`
478 slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
479 part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
481 afd*s*|fla*s*|pst*s*|wfd*s*)
482 unit=`expr $i : '...\([0-9]*\)s'`
483 slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
484 part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
487 unit=`expr $i : '..\([0-9]*\)s'`
488 slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
489 part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
493 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
498 slicename=`dkitos $slice`
499 minor=`dkminor 0 $unit $slice $dkrawpart`
500 mknod $name$unit$slicename c $chr $minor root:operator
501 rm -f r$name$unit$slicename
505 0) slice=$oldslice ;;
507 for part in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
509 minor=`dkminor 0 $unit $slice $part`
510 partname=`dkitop $part`
511 mknod $name$unit$slicename$partname \
512 c $chr $minor root:operator
513 rm -f r$name$unit$slicename$partname
519 echo bad partition for disk in: $i
524 echo bad slice for disk in: $i
529 echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
537 unit=`expr $i : '..\(.*\)'`
541 mknod ${name}${unit} c $chr $(($unit * 64)) root:operator
542 rm -f r${name}${unit}
543 # Fake BSD partitions
544 for i in a b c d e f g h
546 ln -f ${name}${unit} ${name}${unit}$i
547 rm -f r${name}${unit} r${name}${unit}$i
549 # User-readable and programmer-readable name sets
551 mknod ${name}${unit}.1720 c $chr $(($unit * 64 + 1)) \
553 rm -f r${name}${unit}.1720
554 # ln -f ${name}${unit}.1720 ${name}${unit}135hs21
555 # rm -f r${name}${unit}135hs21
557 mknod ${name}${unit}.1480 c $chr $(($unit * 64 + 2)) \
559 rm -f r${name}${unit}.1480
560 # ln -f ${name}${unit}.1480 ${name}${unit}135hs18
561 # rm -f r${name}${unit}135hs18
562 # ln -f ${name}${unit}.1480 ${name}${unit}96hs18
563 # rm -f r${name}${unit}96hs18
565 mknod ${name}${unit}.1440 c $chr $(($unit * 64 + 3)) \
567 rm -f r${name}${unit}.1440
568 # ln -f ${name}${unit}.1440 ${name}${unit}135
569 # rm -f r${name}${unit}135
570 # ln -f ${name}${unit}.1440 ${name}${unit}135ds18
571 # rm -f r${name}${unit}135ds18
572 # ln -f ${name}${unit}.1440 ${name}${unit}96ds18
573 # rm -f r${name}${unit}96ds18
575 mknod ${name}${unit}.1200 c $chr $(($unit * 64 + 4)) \
577 rm -f r${name}${unit}.1200
578 # ln -f ${name}${unit}.1200 ${name}${unit}96
579 # rm -f r${name}${unit}96
580 # ln -f ${name}${unit}.1200 ${name}${unit}96ds15
581 # rm -f r${name}${unit}96ds15
582 # ln -f ${name}${unit}.1200 ${name}${unit}135ds15
583 # rm -f r${name}${unit}135ds15
585 mknod ${name}${unit}.820 c $chr $(($unit * 64 + 5)) \
587 rm -f r${name}${unit}.820
588 # ln -f ${name}${unit}.820 ${name}${unit}96hs10
589 # rm -f r${name}${unit}96hs10
590 # ln -f ${name}${unit}.820 ${name}${unit}135hs10
591 # rm -f r${name}${unit}135hs10
593 mknod ${name}${unit}.800 c $chr $(($unit * 64 + 6)) \
595 rm -f r${name}${unit}.800
596 # ln -f ${name}${unit}.800 ${name}${unit}96ds10
597 # rm -f r${name}${unit}96ds10
598 # ln -f ${name}${unit}.800 ${name}${unit}135ds10
599 # rm -f r${name}${unit}135ds10
601 mknod ${name}${unit}.720 c $chr $(($unit * 64 + 7)) \
603 rm -f r${name}${unit}.720
604 # ln -f ${name}${unit}.720 ${name}${unit}96ds9
605 # rm -f r${name}${unit}96ds9
606 # ln -f ${name}${unit}.720 ${name}${unit}135ds9
607 # rm -f r${name}${unit}135ds9
609 mknod ${name}${unit}.360 c $chr $(($unit * 64 + 8)) \
611 rm -f r${name}${unit}.360
612 # ln -f ${name}${unit}.360 ${name}${unit}48
613 # rm -f r${name}${unit}48
614 # ln -f ${name}${unit}.360 ${name}${unit}48ds9
615 # rm -f r${name}${unit}48ds9
617 mknod ${name}${unit}.640 c $chr $(($unit * 64 + 9)) \
619 rm -f r${name}${unit}.640
620 # ln -f ${name}${unit}.640 ${name}${unit}96ds8
621 # rm -f r${name}${unit}96ds8
622 # ln -f ${name}${unit}.640 ${name}${unit}135ds8
623 # rm -f r${name}${unit}135ds8
625 mknod ${name}${unit}.1232 c $chr $(($unit * 64 + 10)) \
627 rm -f r${name}${unit}.1232
628 # ln -f ${name}${unit}.1232 ${name}${unit}96ds8
629 # rm -f r${name}${unit}96ds8
630 # ln -f ${name}${unit}.1232 ${name}${unit}135ds8
631 # rm -f r${name}${unit}135ds8
634 echo bad unit for disk in: $i
640 aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|ipsd*|md*|mlxd*|pst*|twed*|vn*|wd*|wfd*)
643 aacd*) name=aacd; chr=151;;
644 ad*) name=ad; chr=116;;
645 ar*) name=ar; chr=157;;
646 afd*) name=afd; chr=118;;
647 amrd*) name=amrd; chr=133;;
648 da*) name=da; chr=13;;
649 fla*) name=fla; chr=102;;
650 idad*) name=idad; chr=109;;
651 ipsd*) name=ipsd; chr=176;;
652 md*) name=md; chr=95;;
653 mlxd*) name=mlxd; chr=131;;
654 pst*) name=pst; chr=168;;
655 twed*) name=twed; chr=147;;
656 vn*) name=vn; chr=43;;
657 wd*) name=wd; chr=3;;
658 wfd*) name=wfd; chr=87;;
661 aacd*|amrd*|idad*|ipsd*|mlxd*|twed*)
662 unit=`expr $i : '....\(.*\)'`
665 unit=`expr $i : '...\(.*\)'`
668 unit=`expr $i : '..\(.*\)'`
672 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
673 for slicepartname in s0h s1h s2 s3 s4
675 sh MAKEDEV $name$unit$slicepartname
679 echo bad unit for disk in: $i
689 unit=`expr $i : '...\(.*\)'`
691 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
692 for part in 0 1 2 3 4 5 6 7
694 minor=`dkminor 0 $unit 0 $part`
695 partname=`dkitop $part`
696 mknod $name$unit$partname c $chr $minor root:operator
697 rm -f r$name$unit$partname
701 echo bad unit for disk in: $i
707 # SCSI processor type driver
711 unit=`expr $i : 'pt\([0-9][0-9]*\)'`
712 if [ -z "${unit}" ]; then
715 unit=$(($unit + 1 - 1))
716 mknod ${name}${unit} c $chr `unit2minor $unit`
719 # SCSI SES/SAF-TE type driver
723 unit=`expr $i : 'ses\([0-9][0-9]*\)'`
724 if [ -z "${unit}" ]; then
727 unit=$(($unit + 1 - 1))
728 mknod ${name}${unit} c $chr `unit2minor $unit`
730 # SCSI target mode sample driver
734 unit=`expr $i : 'targ\([0-9][0-9]*\)'`
735 if [ -z "${unit}" ]; then
738 unit=$(($unit + 1 - 1))
739 mknod ${name}${unit} c $chr `unit2minor $unit`
740 mknod ${name}.ctl c $chr 0xffff00ff
743 # CAM transport layer device
745 # This major number is temporary
748 units=`expr $i : 'xpt\(.*\)'`
749 if [ -z "${units}" ]; then
753 while [ $i -lt $units ]; do
756 mknod $dname c $chr `unit2minor $i` root:operator
761 # CAM passthrough device
763 # This major number is temporary
766 units=`expr $i : 'pass\(.*\)'`
767 if [ -z "${units}" ]; then
771 while [ $i -lt $units ]; do
774 mknod $dname c $chr `unit2minor $i` root:operator
779 class=`expr $i : 'pty\(.*\)'`
782 1) offset=32 name=q;;
783 2) offset=64 name=r;;
784 3) offset=96 name=s;;
785 # Note that xterm (at least) only look at p-s.
786 4) offset=128 name=P;;
787 5) offset=160 name=Q;;
788 6) offset=192 name=R;;
789 7) offset=224 name=S;;
790 # This still leaves [tuTU].
791 *) echo bad unit for pty in: $i;;
797 while [ $i -lt 32 ]; do
798 # This was an awk substr() before.
799 c=$(echo 0123456789abcdefghijklmnopqrstuv |
800 dd bs=1 skip=$i count=1 2>/dev/null)
801 mknod tty$name$c c 5 $(($offset + $i))
802 mknod pty$name$c c 6 $(($offset + $i))
812 unit=`expr $i : '..\(.*\)'`
816 [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
817 mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
818 ln -f sa${unit}.ctl rsa${unit}.ctl
821 mknod sa${unit}.${m} c $chr \
822 `saminor 0 ${unit} ${m} 0` root:operator
823 ln -f sa${unit}.${m} rsa${unit}.${m}
824 mknod nsa${unit}.${m} c $chr \
825 `saminor 0 ${unit} ${m} 1` root:operator
826 ln -f nsa${unit}.${m} nrsa${unit}.${m}
827 mknod esa${unit}.${m} c $chr \
828 `saminor 0 ${unit} ${m} 2` root:operator
829 ln -f esa${unit}.${m} ersa${unit}.${m}
831 ln -f sa${unit}.0 sa${unit}
832 ln -f sa${unit}.0 rsa${unit}.0
833 ln -f sa${unit}.0 rsa${unit}
834 ln -f nsa${unit}.0 nsa${unit}
835 ln -f nsa${unit}.0 nrsa${unit}.0
836 ln -f nsa${unit}.0 nrsa${unit}
837 ln -f esa${unit}.0 esa${unit}
838 ln -f esa${unit}.0 ersa${unit}.0
839 ln -f esa${unit}.0 ersa${unit}
842 echo bad unit for tape in: $i
850 unit=`expr $i : '..\(.*\)'`
852 ch*) name=ch; chr=17;;
856 mknod ${name}${unit} c $chr $unit root:operator
859 echo bad unit for media changer in: $i
866 mknod ata c 159 0 root:operator
870 unit=`expr $i : '...\(.*\)'`
874 mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator
876 mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator
877 chmod 640 nast${unit}
880 echo bad unit for tape in: $i
888 units=`expr $i : '...\(.*\)t'`;
889 tracks=`expr $i : '.*t\(.*\)'`;
892 if [ -z "${units}" ]; then
895 if [ -z "${tracks}" ]; then
898 if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then
900 while [ $i -le $units ]; do
904 while [ $j -le ${tracks} ]; do
905 mknod ${dname}t$j c $chr \
906 $((($i * 8) + (65536 * $j))) \
913 echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
921 acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
922 cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
923 mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
924 scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
926 if [ -z "${units}" ]; then
929 if [ "${units}" -le 31 ]; then
931 while [ $i -le $units ]; do
934 mknod ${dname}a c $chr $(($i * 8)) root:operator
937 ln -f ${dname}a ${dname}c;;
939 mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator;;
946 echo "$i is invalid -- can't have more than 32 cd devices"
953 unit=`expr $i : '...\(.*\)'`
957 mknod wcd${unit}a c $chr $(($unit * 8 + 0)) root:operator
958 mknod wcd${unit}c c $chr $(($unit * 8 + 2)) root:operator
959 ln -f wcd${unit}a rwcd${unit}a
960 ln -f wcd${unit}c rwcd${unit}c
961 chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
964 echo bad unit for disk in: $i
972 unit=`expr $i : '...\(.*\)'`
976 mknod rwst${unit} c $chr $(($unit * 8 + 0)) root:operator
977 chmod 640 rwst${unit}
984 unit=`expr $i : 'iic\(.*\)'`
985 mknod iic$unit c 105 `unit2minor $unit`
989 unit=`expr $i : 'smb\(.*\)'`
990 mknod smb$unit c 106 `unit2minor $unit`
994 unit=`expr $i : 'pcfclock\(.*\)'`
995 mknod pcfclock$unit c 140 `unit2minor $unit`
999 unit=`expr $i : 'ppi\(.*\)'`
1000 mknod ppi$unit c 82 `unit2minor $unit`
1004 unit=`expr $i : 'pps\(.*\)'`
1005 mknod pps$unit c 89 `unit2minor $unit`
1009 mknod usb c 108 255 root:operator
1015 unit=`expr $i : 'usb\(.*\)'`
1016 mknod usb$unit c 108 `unit2minor $unit` root:operator
1022 unit=`expr $i : 'ucom\(.*\)'`
1023 minor=$(($unit + 128))
1024 minor=`unit2minor $(($unit + 128))`
1025 mknod ucom$unit c 138 $minor uucp:dialer
1031 unit=`expr $i : 'uhid\(.*\)'`
1032 mknod uhid$unit c 122 `unit2minor $unit` root:operator
1038 unit=`expr $i : 'ums\(.*\)'`
1039 mknod ums$unit c 111 `unit2minor $unit` root:operator
1044 unit=`expr $i : 'ulpt\(.*\)'`
1045 minor=`unit2minor $unit`
1046 mknod ulpt$unit c 113 $minor
1047 minor=`unit2minor $(($unit + 64))`
1048 mknod unlpt$unit c 113 $minor # and the 'no prime' version
1053 unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
1054 endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
1055 if [ -z "${unit}" ]; then
1056 echo $i - Invalid unit number
1058 if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15
1059 mknod ugen$unit c 114 \
1060 `unit2minor $(($unit * 16))` root:operator
1062 while [ $i -lt 16 ]; do
1063 mknod ugen$unit.$i c 114 \
1064 `unit2minor $(($unit * 16 + $i))` root:operator
1068 minor=`unit2minor $(($unit * 16 + $endpoint))`
1069 mknod ugen$unit.$endpoint c 114 $minor root:operator
1076 unit=`expr $i : 'urio\(.*\)'`
1077 mknod urio$unit c 143 `unit2minor $unit` root:operator
1083 unit=`expr $i : 'uscanner\(.*\)'`
1084 mknod uscanner$unit c 156 `unit2minor $unit` root:operator
1090 unit=`expr $i : 'umodem\(.*\)'`
1091 mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer
1096 unit=`expr $i : 'lpt\(.*\)'`
1097 mknod lpt$unit c 16 `unit2minor $unit`
1098 mknod lpctl$unit c 16 `unit2minor $(($unit + 128))`
1101 # Use this to create virtual consoles for syscons, pcvt or codrv
1103 # use as MAKEDEV vtyNN to create NN entries
1106 units=`expr $i : 'vty\(.*\)'`
1108 while [ $i -lt $units ]; do
1109 mknod ttyv$(printf %01x $i) c $chr `unit2minor $i`
1112 ln -fs ttyv0 vga # XXX X still needs this pccons relic
1116 units=`expr $i : 'nmdm\(.*\)'`
1119 while [ $i -lt $units ]; do
1120 minor=`unit2minor $i`
1121 minor=$(($minor + $minor))
1122 mknod nmdm${i}A c $chr $minor
1123 mknod nmdm${i}B c $chr $(($minor + 1))
1129 nbpf=`expr $i : 'bpf\(.*\)$'`
1131 while [ $unit -le $nbpf ]; do
1132 mknod bpf$unit c 23 `unit2minor $unit`
1138 mknod speaker c 26 0
1143 unit_low=`expr $i : 'cua.*\(.\)$'`
1150 unit_high=`expr $i : 'cuaa\(.\).$'`
1151 m_high=`ttyminor $unit_high`
1154 unit=$unit_high$unit_low
1155 m=$(($m_high << 16 | `ttyminor $unit_low`))
1156 mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer
1157 mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer
1158 mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer
1163 mknod crypto c 70 0 root:operator
1168 unit=`expr $i : 'fwmem\(.*\)'`
1169 mknod fwmem$unit c 127 $((1<<24 | $unit)) root:operator
1170 chmod 660 fwmem$unit
1174 unit=`expr $i : 'fw\(.*\)'`
1175 mknod fw$unit c 127 $unit root:operator
1179 tty?|tty0?|ttyd?|ttyd??)
1180 unit_low=`expr $i : 'tty.*\(.\)$'`
1187 unit_high=`expr $i : 'ttyd\(.\).$'`
1188 m_high=`ttyminor $unit_high`
1191 unit=$unit_high$unit_low
1192 m=$(($m_high << 16 | `ttyminor $unit_low`))
1193 mknod ttyd$unit c 28 $m
1194 mknod ttyid$unit c 28 $(($m | 32))
1195 mknod ttyld$unit c 28 $(($m | 64))
1200 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1201 g h i j k l m n o p q r s t u v"
1203 card=`expr $i : 'cua.*\(.\)$'`
1204 for unit in $portlist
1206 minor=`ttyminor $unit`
1207 minor=$(($card * 65536 + $minor))
1209 mknod cuac$name c $major $(($minor + 128)) uucp:dialer
1210 mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer
1211 mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer
1217 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1218 g h i j k l m n o p q r s t u v"
1220 card=`expr $i : 'tty.*\(.\)$'`
1221 for unit in $portlist
1223 minor=`ttyminor $unit`
1224 minor=$(($card * 65536 + $minor))
1226 mknod ttyc$name c $major $minor
1227 mknod ttyic$name c $major $(($minor + 32))
1228 mknod ttylc$name c $major $(($minor + 64))
1232 # RISCom8 'rc' driver entries
1236 unit=`expr $i : 'cua.*\(.\)$'`
1238 mknod cuam$unit c 63 $(($m + 128)) uucp:dialer
1243 unit=`expr $i : 'tty.*\(.\)$'`
1245 mknod ttym$unit c 63 $m
1249 # Note: these are 'base 1' to match the numbers on the panels, and to match
1250 # the manual that comes with the system.
1253 nports=`expr $i : 'ttyA\(.*\)$'`
1255 while [ $port -le $nports ]; do
1256 minor=$(($port - 1))
1257 name=$(printf %02d $port)
1258 mknod ttyA$name c $major $minor
1259 mknod ttyiA$name c $major $(($minor + 65536))
1260 mknod ttylA$name c $major $(($minor + 131072))
1263 # For the user-mode control program, 'sicontrol'
1264 mknod si_control c 68 262144
1270 nports=`expr $i : 'cuaA\(.*\)$'`
1272 while [ $port -le $nports ]; do
1273 minor=$(($port - 1))
1274 name=$(printf %02d $port)
1275 mknod cuaA$name c $major $(($minor + 128)) uucp:dialer
1276 mknod cuaiA$name c $major $(($minor + 128 + 65536)) \
1278 mknod cualA$name c $major $(($minor + 128 + 131072)) \
1285 # Alpha AS8[24]00 (TurboLaser) console.
1287 unit=`expr $i : 'zs.*\(.\)$'`
1289 mknod zs$unit c 135 $m
1292 # Digiboard PC/?? 16 port card.
1293 # The current scheme of minor numbering is:
1295 # unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
1297 # CARD bitfield in future versions may be extended to 3 bits.
1302 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1304 card=`expr $i : 'tty.*\(.\)$'`
1305 for unit in $portlist
1307 minor=`ttyminor $unit`
1308 minor=$(($card * 65536 + $minor))
1310 mknod ttyD$name c $major $minor
1311 mknod ttyiD$name c $major $(($minor + 32))
1312 mknod ttylD$name c $major $(($minor + 64))
1318 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1320 card=`expr $i : 'cua.*\(.\)$'`
1321 for unit in $portlist
1323 minor=`ttyminor $unit`
1324 minor=$(($card * 65536 + $minor))
1326 mknod cuaD$name c $major $(($minor + 128)) uucp:dialer
1327 mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer
1328 mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer
1333 # Stallion multi serial cards (stl and stli drivers)
1335 # These drivers reserve 64 minor devices per board, even if the board
1336 # supports only 4 devices. We default to creating only 8 of the 64 devices
1337 # to keep /dev from getting too large (which => slow). The last part of the
1338 # arg is the board number to create ports for. So:
1339 # ttyE0 will create 8 dialin ports ttyE0-ttyE7, plus ttyiE* and ttylE*
1340 # cuaE0 will create 8 dialout ports cuaE0-cuaE7, plus cuaiE* and cualE*
1341 # ttyE1 will create 8 dialin ports ttyE64-ttyE71, plus ttyiE* and ttylE*
1343 # If you have EasyConnect 8/32 or 8/64 cards, you will need to change the
1344 # definition of "maxport" below to get nodes for the full 32 or 64
1347 # Note that the mapping of minor device numbers (with the hole between
1348 # 32-64k) is a bit odd to keep compatibility with ttyd? for
1349 # lock/initial devices.
1350 # Minor device field for the ports is
1351 # card{3} unused{4} unit-msb{1} unused{8} callout{1} lock{1} init{1} unit-lsbs{5}
1352 # for the mem device is
1354 # (For stl, there is only 1 mem device per system; for stli, one per board)
1357 stallion 72 E `expr $i : 'tty.*\(.\)$'` 0
1360 stallion 72 E `expr $i : 'cua.*\(.\)$'` 1
1363 card=`expr $i : 'stl\(.\)$'`
1364 stallion 72 E $card 0
1365 stallion 72 E $card 1
1369 stallion 75 F `expr $i : 'tty.*\(.\)$'` 0
1372 stallion 75 F `expr $i : 'cua.*\(.\)$'` 1
1375 card=`expr $i : 'stl\(.\)$'`
1376 stallion 75 F $card 0
1377 stallion 75 F $card 1
1381 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1382 modulelist="a b c d"
1384 card=`expr $i : 'tty.*\(.\)$'`
1385 for unit in $modulelist
1387 moduleminor=`ttyminor $unit`
1388 moduleminor=$(($moduleminor % 10 * 16))
1391 for unit in $portlist
1393 minor=`ttyminor $unit`
1394 minor=$(($card * 65536 + $minor + $moduleminor))
1395 name=$card$modulename$unit
1397 mknod ttyM$name c $major $minor
1398 mknod ttyiM$name c $major $(($minor + 64))
1399 mknod ttylM$name c $major $(($minor + 128))
1406 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1407 modulelist="a b c d"
1409 card=`expr $i : 'cua.*\(.\)$'`
1410 for unit in $modulelist
1412 moduleminor=`ttyminor $unit`
1413 moduleminor=$(($moduleminor % 10 * 16))
1416 for unit in $portlist
1418 minor=`ttyminor $unit`
1419 minor=$(($card * 65536 + $minor + $moduleminor))
1420 name=$card$modulename$unit
1422 mknod cuaM$name c $major $(($minor + 262144)) \
1424 mknod cuaiM$name c $major $(($minor + 64 + 262144)) \
1426 mknod cualM$name c $major $(($minor + 128 + 262144)) \
1436 MINOR=$(($BOARD * 65536))
1438 dmesg | while read first rest; do
1446 rm -f ttyR* ttyiR* ttylR*
1447 for i in $controllers; do
1449 dmesg | while read first bar ports rest; do
1457 echo -n "Creating $ndevices devices for $i: "
1459 while [ $dev -lt $ndevices ]; do
1460 mknod ttyR$Rnum c $major $MINOR
1461 mknod ttyiR$Rnum c $major $(($MINOR + 32))
1462 mknod ttylR$Rnum c $major $(($MINOR + 64))
1464 MINOR=$(($MINOR + 1))
1467 BOARD=$(($BOARD + 1))
1468 MINOR=$(($BOARD * 65536))
1476 MINOR=$(($BOARD * 65536))
1478 dmesg | while read first rest; do
1486 rm -f cuaR* cuaiR* cualR*
1487 for i in $controllers; do
1489 dmesg | while read first bar ports rest; do
1497 echo -n "Creating $ndevices devices for $i: "
1499 while [ $dev -lt $ndevices ]; do
1500 mknod cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer
1501 mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
1503 mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \
1506 MINOR=$(($MINOR + 1))
1509 BOARD=$(($BOARD + 1))
1510 MINOR=$(($BOARD * 65536))
1516 unit=`expr $i : 'mse\(.*\)'`
1518 # non-blocking for X11
1519 mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))`
1523 unit=`expr $i : 'psm\(.*\)'`
1525 # non-blocking for X11
1526 mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))`
1530 name=`expr $i : 'mouse\(.*\)'`
1531 if [ ! -c $name ]; then
1532 $0 $name # make the appropriate device
1538 mknod pcaudio c 24 0
1539 mknod pcaudioctl c 24 128
1543 mknod socksys c 41 0
1546 chmod 666 socksys nfsd spx
1551 # changes from Linux voxware
1552 # minor Linux FreeBSD
1553 # 8 sequencer2 (aka music0) music0
1554 # 17 patmgr0 sequencer1
1555 # 33 patmgr1 sequencer2
1558 unit=`expr $i : 'snd\(.*\)'`
1561 # XXX write this less verbosely, like std
1562 snd_security_hole=0 # XXX
1563 umask $snd_security_hole
1565 ln -fs mixer$unit mixer
1566 ln -fs sequencer$unit sequencer
1568 ln -fs audio$unit audio
1569 ln -fs dspW$unit dspW
1570 ln -fs music$unit music
1572 ln -fs dsp$unit.0 dsp$unit
1573 ln -fs audio$unit.0 audio$unit
1574 ln -fs dspW$unit.0 dspW$unit
1576 mknod mixer$unit c $chr `unit2minor $(($unit * 16 + 0))`
1577 mknod sequencer$unit c $chr `unit2minor $(($unit * 16 + 1))`
1578 mknod midi$unit c $chr `unit2minor $(($unit * 16 + 2))`
1582 minor=$(($chn * 65536 + $unit * 16))
1583 mknod dsp$unit.$chn c $chr $(($minor + 3))
1584 mknod audio$unit.$chn c $chr $(($minor + 4))
1585 mknod dspW$unit.$chn c $chr $(($minor + 5))
1588 mknod sndstat c $chr 6
1589 # minor number 7 is unused
1590 mknod music$unit c $chr `unit2minor $(($unit * 16 + 8))`
1591 mknod pss$unit c $chr `unit2minor $(($unit * 16 + 9))`
1592 # minor numbers 10-15 are unused
1597 mknod vatio c 25 128
1602 unit=`expr $i : 'gsc\(.*\)'`
1603 mknod gsc${unit} c 47 `unit2minor $unit`
1604 mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))`
1605 mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))`
1606 mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))`
1607 chmod 666 gsc${unit}*
1611 mknod apm c 39 0 root:operator
1616 mknod apmctl c 39 8 root:operator
1621 unit=`expr $i : 'card\(.*\)'`
1623 mknod card$unit c $chr `unit2minor $unit`
1629 *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
1630 *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
1631 *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
1632 *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
1635 ttyy?) unit=$(($unit + 16));;
1636 ttyz?) unit=$(($unit + 32));;
1642 mknod cronyx c 42 63
1646 mknod joy0 c 51 0 root:operator
1647 mknod joy1 c 51 1 root:operator
1657 unit=`expr $i : 'ctx\(.*\)'`
1658 mknod ctx$unit c 40 `unit2minor $unit`
1663 unit=`expr $i : 'meteor\(.*\)'`
1664 mknod meteor$unit c 67 `unit2minor $unit`
1665 chmod 444 meteor$unit
1669 unit=`expr $i : 'bktr\(.*\)'`
1670 mknod bktr$unit c 92 `unit2minor $unit`
1671 mknod tuner$unit c 92 `unit2minor $((16 + $unit))`
1672 mknod vbi$unit c 92 `unit2minor $((32 + $unit))`
1673 chmod 444 bktr$unit tuner$unit vbi$unit
1677 ntun=`expr $i : 'tun\(.*\)$'`
1679 while [ $unit -le $ntun ]; do
1680 mknod tun$unit c 52 `unit2minor $unit`
1686 ntap=`expr $i : 'tap\(.*\)$'`
1688 while [ $unit -le $ntap ]; do
1689 mknod tap$unit c 149 `unit2minor $unit` root:network
1695 mknod sysmouse c 12 128
1696 mknod consolectl c 12 255
1700 mknod jogdial c 160 0
1704 unit=`expr $i : 'snp\(.*\)'`
1705 mknod snp$unit c 53 `unit2minor $unit`
1708 # dufault@hda.com: If I do much more work on other A-D boards
1709 # then eventually we'll have a "ad" and "dio" interface and some of these
1710 # "labpcaio" ones will be gone.
1711 # labpcaio: D-A and A-D.
1712 # labpcdio: Digital in and Digital out.
1719 unit=`expr $i : 'labpcaio\(.*\)'`
1720 all="0 1 2 3 4 5 6 7"
1725 unit=`expr $i : 'labpcdio\(.*\)'`
1730 die 3 "Don't know LabPC type $i"
1733 if [ -z "${unit}" ]; then
1738 mknod $name$unit c 66 $(($offset + $unit))
1743 mknod $name$i c 66 $(($offset + $i))
1747 echo "No such LabPC unit: $unit"
1754 mknod perfmon c 2 32 root:kmem
1761 mknod ipstate c 79 2
1766 mknod elan-mmcr c 100 0 # XXX local major
1771 unit=`expr $i : 'kbd\(.*\)'`
1773 mknod kbd$unit c $chr `unit2minor $unit`
1785 unit=`expr $i : 'i4brbch\(.*\)'`
1786 mknod i4brbch$unit c 57 `unit2minor $unit`
1791 unit=`expr $i : 'i4bteld\(.*\)'`
1792 mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))`
1796 unit=`expr $i : 'i4btel\(.*\)'`
1797 mknod i4btel$unit c 56 `unit2minor $unit`
1801 unit=`expr $i : 'i4btrc\(.*\)'`
1802 mknod i4btrc$unit c 59 `unit2minor $unit`
1806 unit=`expr $i : 'aac\(.*\)'`
1807 mknod aac$unit c 150 `unit2minor $unit`
1808 ln -fs aac$unit afa$unit
1809 ln -fs aac$unit hpn$unit
1813 unit=`expr $i : 'mlx\(.*\)'`
1814 mknod mlx$unit c 130 `unit2minor $unit`
1818 unit=`expr $i : 'amr\(.*\)'`
1819 mknod amr$unit c 132 `unit2minor $unit`
1823 unit=`expr $i : 'ips\(.*\)'`
1824 mknod mlx$unit c 175 `unit2minor $unit`
1828 unit=`expr $i : 'ciss\(.*\)'`
1829 mknod ciss$unit c 166 `unit2minor $unit`
1833 mknod agpgart c 148 0
1837 unit=`expr $i : 'twe\(.*\)'`
1838 mknod twe$unit c 146 `unit2minor $unit`
1842 unit=`expr $i : 'tw\(.*\)'`
1843 mknod tw$unit c 19 `unit2minor $unit` root:operator
1847 unit=`expr $i : 'cfs\(.*\)'`
1848 mknod cfs$unit c 93 $unit root:operator
1852 unit=`expr $i : 'nsmb\(.*\)'`
1853 mknod nsmb$unit c 144 $unit
1857 umask 0 # XXX should be elsewhere
1863 echo $i - no such device name