Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 # $DragonFly: src/Makefile.inc1,v 1.26 2004/03/25 20:52:43 dillon Exp $
   4 #
   5 # Make command line options:
   6 #       -DMAKE_KERBEROS5 to build Kerberos5
   7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   8 #       -DNOCLEAN do not clean at all
   9 #       -DNOCRYPT will prevent building of crypt versions
  10 #       -DNOMAN do not build the manual pages
  11 #       -DNOPROFILE do not build profiled libraries
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24 #
  25 # The intended user-driven targets are:
  26 #
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # quickworld  - skip the glue and do a depend+build on the meat
  29 # realquickworld - skip the glue and depend stages and just build the meat
  30 # crossworld  - only build the glue (particularly the cross-build environment)
  31 # installworld- install everything built by "buildworld"
  32 # update      - convenient way to update your source tree (eg: sup/cvs)
  33 # most        - build user commands, no libraries or include files
  34 # installmost - install user commands, no libraries or include files
  35 #
  36 # Standard targets (not defined here) are documented in the makefiles in
  37 # /usr/share/mk.  These include:
  38 #               obj depend all install clean cleandepend cleanobj
  39
  40 # Put initial settings here.
  41 SUBDIR=
  42
  43 # We must do share/info early so that installation of info `dir'
  44 # entries works correctly.  Do it first since it is less likely to
  45 # grow dependencies on include and lib than vice versa.
  46 .if exists(${.CURDIR}/share/info)
  47 SUBDIR+= share/info
  48 .endif
  49
  50 # We must do include and lib early so that the perl *.ph generation
  51 # works correctly as it uses the header files installed by this.
  52 .if exists(${.CURDIR}/include)
  53 SUBDIR+= include
  54 .endif
  55 .if exists(${.CURDIR}/lib)
  56 SUBDIR+= lib
  57 .endif
  58 # This exists simply to ensure that the obj dir hierarchy is
  59 # intact for nrelease, allowing the nrelease Makefile's to
  60 # reference ${.OBJDIR}.
  61 #
  62 .if exists(${.CURDIR}/nrelease)
  63 SUBDIR+= nrelease
  64 .endif
  65
  66 .if exists(${.CURDIR}/bin)
  67 SUBDIR+= bin
  68 .endif
  69 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  70 SUBDIR+= games
  71 .endif
  72 .if exists(${.CURDIR}/gnu)
  73 SUBDIR+= gnu
  74 .endif
  75 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  76     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
  77 SUBDIR+= kerberos5
  78 .endif
  79 .if exists(${.CURDIR}/libexec)
  80 SUBDIR+= libexec
  81 .endif
  82 .if exists(${.CURDIR}/sbin)
  83 SUBDIR+= sbin
  84 .endif
  85 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
  86 SUBDIR+= secure
  87 .endif
  88 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  89 SUBDIR+= share
  90 .endif
  91 .if exists(${.CURDIR}/sys)
  92 SUBDIR+= sys
  93 .endif
  94 .if exists(${.CURDIR}/usr.bin)
  95 SUBDIR+= usr.bin
  96 .endif
  97 .if exists(${.CURDIR}/usr.sbin)
  98 SUBDIR+= usr.sbin
  99 .endif
 100
 101 # etc must be last for "distribute" to work
 102 .if exists(${.CURDIR}/etc)
 103 SUBDIR+= etc
 104 .endif
 105
 106 # These are last, since it is nice to at least get the base system
 107 # rebuilt before you do them.
 108 .if defined(LOCAL_DIRS)
 109 .for _DIR in ${LOCAL_DIRS}
 110 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
 111 SUBDIR+= ${_DIR}
 112 .endif
 113 .endfor
 114 .endif
 115
 116 .if defined(SUBDIR_OVERRIDE)
 117 SUBDIR=         ${SUBDIR_OVERRIDE}
 118 .endif
 119
 120 .if defined(NOCLEANDIR)
 121 CLEANDIR=       clean cleandepend
 122 .else
 123 CLEANDIR=       cleandir
 124 .endif
 125
 126 SUP?=           /usr/local/bin/cvsup
 127 SUPFLAGS?=      -g -L 2 -P -
 128 .if defined(SUPHOST)
 129 SUPFLAGS+=      -h ${SUPHOST}
 130 .endif
 131
 132 # Object directory base in primary make.  Note that when we rerun make
 133 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
 134 # subdirectory because the rest of the build system needs it that way.
 135 # The original object directory base is saved in OBJTREE.
 136 #
 137 MAKEOBJDIRPREFIX?=      /usr/obj
 138 OBJTREE?=               ${MAKEOBJDIRPREFIX}
 139
 140 # Used for stage installs and pathing
 141 #
 142 DESTDIRBASE?=           ${OBJTREE}${.CURDIR}
 143
 144 TARGET_ARCH?=   ${MACHINE_ARCH}
 145 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 146 TARGET?=        ${MACHINE}
 147 .else
 148 TARGET?=        ${TARGET_ARCH}
 149 .endif
 150 .if make(buildworld)
 151 BUILD_ARCH!=    sysctl -n hw.machine_arch
 152 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 153 .error To cross-build, set TARGET_ARCH.
 154 .endif
 155 .endif
 156
 157 # BTOOLS        (Natively built) All non-cross-development tools that the
 158 #               main build needs.  This includes things like 'mkdir' and 'rm'.
 159 #               We will not use the native system's exec path once we start
 160 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
 161 #
 162 # CTOOLS        (Natively built) Cross development tools which are specific
 163 #               to the target architecture.
 164 #
 165 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
 166 #               CTOOLS.
 167 #
 168 # MACHINE_ARCH  Architecture we are building on
 169 # TARGET_ARCH   Architecture we are building for
 170 #
 171 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
 172 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
 173 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
 174
 175 # The strict temporary command path contains all binaries required
 176 # by the buildworld system after the cross-tools stage.
 177 #
 178 STRICTTMPPATH=  ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 179
 180 TMPDIR?=        /tmp
 181 TMPPID!=        echo $$$$
 182
 183 #
 184 # Building a world goes through the following stages
 185 #
 186 # 1. bootstrap-tool stage [BMAKE]
 187 #       This stage is responsible for creating programs that
 188 #       are needed for backward compatibility reasons. They
 189 #       are not built as cross-tools.
 190 # 2. build-tool stage [TMAKE]
 191 #       This stage is responsible for creating the object
 192 #       tree and building any tools that are needed during
 193 #       the build process.
 194 # 3. cross-tool stage [XMAKE]
 195 #       This stage is responsible for creating any tools that
 196 #       are needed for cross-builds. A cross-compiler is one
 197 #       of them.
 198 # 4. world stage [WMAKE]
 199 #       This stage actually builds the world.
 200 # 5. install stage (optional) [IMAKE]
 201 #       This stage installs a previously built world.
 202 #
 203
 204 # bootstrap-tool stage
 205 #
 206 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 207                 OBJTREE=${OBJTREE} \
 208                 DESTDIR= \
 209                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 210
 211 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 212                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 213                 -DNO_WERROR
 214
 215 # build-tool stage
 216 #
 217 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 218                 OBJTREE=${OBJTREE} \
 219                 DESTDIR= \
 220                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 221
 222 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 223                 -DNO_FORTRAN
 224
 225 # cross-tool stage
 226 #
 227 # note: TOOLS_PREFIX points to the obj root holding the cross
 228 #       compiler binaries, while INCS_PREFIX points to the obj root holding
 229 #       the target environment (and also determines where cross-built
 230 #       libraries and crt*.o are installed).
 231 #
 232 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
 233                 OBJTREE=${OBJTREE} \
 234                 DESTDIR=${CTOOLSDEST} \
 235                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 236                 TOOLS_PREFIX=${CTOOLSDEST} \
 237                 USRDATA_PREFIX=${WORLDDEST}
 238
 239 XMAKE=          ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB
 240
 241 # world stage, note the strict path and note that TOOLS_PREFIX is left
 242 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
 243 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
 244 # for both binary and library paths, even though it is being compiled to
 245 # WORLDDEST.  None of the programs in the world stage are ever actually
 246 # executed during the buildworld/installworld.
 247 #
 248 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
 249                 OBJTREE=${OBJTREE} \
 250                 MACHINE_ARCH=${TARGET_ARCH} \
 251                 MACHINE=${TARGET} \
 252                 OBJFORMAT_PATH=${CTOOLSDEST} \
 253                 PERL5LIB=${WORLDDEST}/usr/libdata/perl/5.00503 \
 254                 GROFF_BIN_PATH=${BTOOLSDEST}/usr/bin \
 255                 GROFF_FONT_PATH=${BTOOLSDEST}/usr/share/groff_font \
 256                 GROFF_TMAC_PATH=${BTOOLSDEST}/usr/share/tmac
 257
 258 WMAKEENV=       ${CROSSENV} \
 259                 DESTDIR=${WORLDDEST} \
 260                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 261                 PATH=${STRICTTMPPATH}
 262
 263 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 264
 265 # install stage
 266 #
 267 IMAKEENV=       ${CROSSENV} \
 268                 PATH=${STRICTTMPPATH}
 269 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 270
 271 # kernel stage
 272 #
 273 KMAKEENV=       ${WMAKEENV}
 274
 275 # buildworld
 276 #
 277 # Attempt to rebuild the entire system, with reasonable chance of
 278 # success, regardless of how old your existing system is.
 279 #
 280 _worldtmp:
 281         @echo
 282         @echo "--------------------------------------------------------------"
 283         @echo ">>> Rebuilding the temporary build tree"
 284         @echo "--------------------------------------------------------------"
 285 .if !defined(NOCLEAN)
 286         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 287 .else
 288         # XXX - These two can depend on any header file.
 289         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 290         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 291 .endif
 292         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 293 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
 294         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
 295                 -p ${_dir}/  > /dev/null
 296         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
 297                 -p ${_dir}/usr > /dev/null
 298 .endfor
 299         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
 300                 -p ${WORLDDEST}/usr/include > /dev/null
 301         ln -sf ${.CURDIR}/sys ${WORLDDEST}
 302
 303 _bootstrap-tools:
 304         @echo
 305         @echo "--------------------------------------------------------------"
 306         @echo ">>> stage 1: bootstrap tools"
 307         @echo "--------------------------------------------------------------"
 308         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 309 _cleanobj:
 310         @echo
 311         @echo "--------------------------------------------------------------"
 312         @echo ">>> stage 2a: cleaning up the object tree"
 313         @echo "--------------------------------------------------------------"
 314         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 315 _obj:
 316         @echo
 317         @echo "--------------------------------------------------------------"
 318         @echo ">>> stage 2b: rebuilding the object tree"
 319         @echo "--------------------------------------------------------------"
 320         cd ${.CURDIR}; ${WMAKE} par-obj
 321 _build-tools:
 322         @echo
 323         @echo "--------------------------------------------------------------"
 324         @echo ">>> stage 2c: build tools"
 325         @echo "--------------------------------------------------------------"
 326         cd ${.CURDIR}; ${TMAKE} build-tools
 327 _cross-tools:
 328         @echo
 329         @echo "--------------------------------------------------------------"
 330         @echo ">>> stage 3: cross tools"
 331         @echo "--------------------------------------------------------------"
 332         cd ${.CURDIR}; ${XMAKE} cross-tools
 333 _includes:
 334         @echo
 335         @echo "--------------------------------------------------------------"
 336         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
 337         @echo "--------------------------------------------------------------"
 338         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 339 _libraries:
 340         @echo
 341         @echo "--------------------------------------------------------------"
 342         @echo ">>> stage 4b: building libraries"
 343         @echo "--------------------------------------------------------------"
 344         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 345 _depend:
 346         @echo
 347         @echo "--------------------------------------------------------------"
 348         @echo ">>> stage 4c: make dependencies"
 349         @echo "--------------------------------------------------------------"
 350         cd ${.CURDIR}; ${WMAKE} par-depend
 351 everything:
 352         @echo
 353         @echo "--------------------------------------------------------------"
 354         @echo ">>> stage 4d: building everything.."
 355         @echo "--------------------------------------------------------------"
 356         cd ${.CURDIR}; ${WMAKE} all
 357
 358 # note: buildworld no longer depends on _cleanobj because we rm -rf the
 359 # entire object tree and built the bootstrap tools in a different location.
 360 #
 361 # buildworld    - build everything from scratch
 362 # quickworld    - skip the bootstrap, build, and cross-build steps
 363 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
 364 #
 365 # note: we include _obj in realquickworld to prevent accidental creation
 366 # of files in /usr/src.
 367
 368 WMAKE_TGTS=
 369 .if !defined(SUBDIR_OVERRIDE)
 370 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 371 .endif
 372 WMAKE_TGTS+=    _obj _build-tools
 373 .if !defined(SUBDIR_OVERRIDE)
 374 WMAKE_TGTS+=    _cross-tools
 375 .endif
 376 WMAKE_TGTS+=    _includes _libraries _depend everything
 377
 378 buildworld: ${WMAKE_TGTS}
 379
 380 quickworld: _obj _includes _libraries _depend everything
 381
 382 realquickworld: _obj _includes _libraries everything
 383
 384 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
 385
 386 .ORDER: ${WMAKE_TGTS}
 387
 388 #
 389 # installcheck
 390 #
 391 # Checks to be sure system is ready for installworld
 392 #
 393 installcheck:
 394 .if !defined(NO_SENDMAIL)
 395         @if ! `id -u smmsp > /dev/null`; then \
 396                 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
 397                 false; \
 398         fi
 399         @if ! `id -g smmsp > /dev/null`; then \
 400                 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
 401                 false; \
 402         fi
 403 .endif
 404
 405 #
 406 # distributeworld
 407 #
 408 # Distributes everything compiled by a `buildworld'.
 409 #
 410 # installworld
 411 #
 412 # Installs everything compiled by a 'buildworld'.
 413 #
 414 distributeworld installworld: installcheck
 415         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 416
 417 #
 418 # reinstall
 419 #
 420 # If you have a build server, you can NFS mount the source and obj directories
 421 # and do a 'make reinstall' on the *client* to install new binaries from the
 422 # most recent server build.
 423 #
 424 reinstall:
 425         @echo "--------------------------------------------------------------"
 426         @echo ">>> Making hierarchy"
 427         @echo "--------------------------------------------------------------"
 428         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 429         @echo
 430         @echo "--------------------------------------------------------------"
 431         @echo ">>> Installing everything.."
 432         @echo "--------------------------------------------------------------"
 433         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 434 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 435         @echo
 436         @echo "--------------------------------------------------------------"
 437         @echo ">>> Rebuilding man page indices"
 438         @echo "--------------------------------------------------------------"
 439         cd ${.CURDIR}/share/man; ${MAKE} makedb
 440 .endif
 441
 442 redistribute:
 443         @echo "--------------------------------------------------------------"
 444         @echo ">>> Distributing everything.."
 445         @echo "--------------------------------------------------------------"
 446         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 447
 448 #
 449 # buildkernel and installkernel
 450 #
 451 # Which kernels to build and/or install is specified by setting
 452 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 453 # Only the existing (depending TARGET) config files are used
 454 # for building kernels and only the first of these is designated
 455 # as the one being installed.
 456 #
 457 # Note that we have to use TARGET instead of TARGET_ARCH when
 458 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 459 # be set to cross-build, we have to make sure TARGET is set
 460 # properly.
 461
 462 .if !defined(KERNCONF) && defined(KERNEL)
 463 KERNCONF=       ${KERNEL}
 464 KERNWARN=       yes
 465 .else
 466 KERNCONF?=      GENERIC
 467 .endif
 468 INSTKERNNAME?=  kernel
 469
 470 KRNLSRCDIR=     ${.CURDIR}/sys
 471 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
 472 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 473 KERNCONFDIR?=   ${KRNLCONFDIR}
 474
 475 BUILDKERNELS=
 476 INSTALLKERNEL=
 477 .for _kernel in ${KERNCONF}
 478 .if exists(${KERNCONFDIR}/${_kernel})
 479 BUILDKERNELS+=  ${_kernel}
 480 .if empty(INSTALLKERNEL)
 481 INSTALLKERNEL= ${_kernel}
 482 .endif
 483 .endif
 484 .endfor
 485
 486 #
 487 # buildkernel
 488 #
 489 # Builds all kernels defined by BUILDKERNELS.
 490 #
 491 buildkernel:
 492 .if empty(BUILDKERNELS)
 493         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 494         @false
 495 .endif
 496 .if defined(KERNWARN)
 497         @echo "--------------------------------------------------------------"
 498         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 499         @echo "--------------------------------------------------------------"
 500         @sleep 3
 501 .endif
 502         @echo
 503 .for _kernel in ${BUILDKERNELS}
 504         @echo "--------------------------------------------------------------"
 505         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 506         @echo "--------------------------------------------------------------"
 507         @echo "===> ${_kernel}"
 508         mkdir -p ${KRNLOBJDIR}
 509 .if !defined(NO_KERNELCONFIG)
 510         cd ${KRNLCONFDIR}; \
 511                 PATH=${STRICTTMPPATH} \
 512                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 513                         ${KERNCONFDIR}/${_kernel}
 514 .endif
 515 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 516         cd ${KRNLOBJDIR}/${_kernel}; \
 517             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
 518 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
 519         cd ${KRNLOBJDIR}/${_kernel}; \
 520             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
 521 .endif
 522 .endif
 523         cd ${KRNLOBJDIR}/${_kernel}; \
 524             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 525             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 526 .if !defined(NO_KERNELDEPEND)
 527         cd ${KRNLOBJDIR}/${_kernel}; \
 528             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 529 .endif
 530         cd ${KRNLOBJDIR}/${_kernel}; \
 531             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 532         @echo "--------------------------------------------------------------"
 533         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 534         @echo "--------------------------------------------------------------"
 535 .endfor
 536
 537 #
 538 # installkernel
 539 #
 540 # Install the kernel defined by INSTALLKERNEL
 541 #
 542 installkernel reinstallkernel:
 543         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 544             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 545
 546 #
 547 # update
 548 #
 549 # Update the source tree, by running sup and/or running cvs to update to the
 550 # latest copy.
 551 #
 552 update:
 553 .if defined(SUP_UPDATE)
 554         @echo "--------------------------------------------------------------"
 555         @echo ">>> Running ${SUP}"
 556         @echo "--------------------------------------------------------------"
 557 .if defined(SUPFILE)
 558         @${SUP} ${SUPFLAGS} ${SUPFILE}
 559 .endif
 560 .if defined(SUPFILE1)
 561         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 562 .endif
 563 .if defined(SUPFILE2)
 564         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 565 .endif
 566 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 567         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 568 .endif
 569 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 570         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 571 .endif
 572 .endif
 573 .if defined(CVS_UPDATE)
 574         @echo "--------------------------------------------------------------"
 575         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 576         @echo "--------------------------------------------------------------"
 577         cd ${.CURDIR}; cvs -q update -rRELENG_4 -P -d
 578 .endif
 579
 580 #
 581 # most
 582 #
 583 # Build most of the user binaries on the existing system libs and includes.
 584 #
 585 most:
 586         @echo "--------------------------------------------------------------"
 587         @echo ">>> Building programs only"
 588         @echo "--------------------------------------------------------------"
 589 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 590         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 591 .endfor
 592
 593 #
 594 # installmost
 595 #
 596 # Install the binaries built by the 'most' target.  This does not include
 597 # libraries or include files.
 598 #
 599 installmost:
 600         @echo "--------------------------------------------------------------"
 601         @echo ">>> Installing programs only"
 602         @echo "--------------------------------------------------------------"
 603 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 604         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 605 .endfor
 606
 607 #
 608 # ------------------------------------------------------------------------
 609 #
 610 # From here onwards are utility targets used by the 'make world' and
 611 # related targets.  If your 'world' breaks, you may like to try to fix
 612 # the problem and manually run the following targets to attempt to
 613 # complete the build.  Beware, this is *not* guaranteed to work, you
 614 # need to have a pretty good grip on the current state of the system
 615 # to attempt to manually finish it.  If in doubt, 'make world' again.
 616 #
 617
 618 # bootstrap-tools: Build all tools required to build all tools.
 619 #
 620 # [x]install:   dependancies on various new install features
 621 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 622 #               envs are not compatible with older objformat binaries.
 623 #
 624 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 625 _strfile=       games/fortune/strfile
 626 .endif
 627
 628 bootstrap-tools:
 629 .for _tool in ${_strfile} \
 630     bin/chmod bin/cp bin/dd bin/mkdir bin/rm bin/echo bin/test \
 631     bin/cat bin/date bin/ln bin/mv bin/csh bin/expr bin/sh bin/ls \
 632     bin/hostname bin/kill \
 633     sbin/sysctl \
 634     usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
 635     usr.bin/m4 usr.bin/rpcgen usr.bin/make gnu/usr.bin/awk usr.bin/file \
 636     usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
 637     usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
 638     usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
 639     usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
 640     usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
 641     usr.bin/vi usr.bin/cap_mkdb usr.bin/vgrind usr.bin/true usr.bin/false \
 642     usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
 643     usr.sbin/chown usr.sbin/mtree usr.sbin/config \
 644     usr.sbin/btxld usr.sbin/pwd_mkdb usr.sbin/zic usr.sbin/makewhatis \
 645     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo \
 646     gnu/usr.bin/grep gnu/usr.bin/sort gnu/usr.bin/patch \
 647     gnu/usr.bin/gzip gnu/usr.bin/perl
 648         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
 649                 cd ${.CURDIR}/${_tool}; \
 650                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 651                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 652                 ${MAKE} DIRPRFX=${_tool}/ all; \
 653                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 654 .endfor
 655
 656 # build-tools: Build special purpose build tools.  gcc2 related tools are
 657 # only built under the i386 architecture.  Other architectures are
 658 # gcc3-only.
 659 #
 660 # XXX we may be able to remove or consolidate this into bootstrap-tools
 661 # now that we have the native helper (.nx/.no) infrastructure.
 662 #
 663 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 664 _games= games/adventure games/hack games/phantasia
 665 .endif
 666
 667 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 668 _share= share/syscons/scrnmaps
 669 .endif
 670
 671 _gcc3_cross= gnu/usr.bin/cc3
 672 _gcc3_tools= gnu/usr.bin/cc3/cc_tools
 673 .if ${MACHINE_ARCH} == "i386" && ${TARGET_ARCH} == "i386"
 674 _gcc2_cross= gnu/usr.bin/cc
 675 _gcc2_tools= gnu/usr.bin/cc/cc_tools
 676 _binutils= gnu/usr.bin/binutils gnu/usr.bin/binutils214
 677 .else
 678 _binutils= gnu/usr.bin/binutils214
 679 .endif
 680
 681 .if !defined(NO_FORTRAN)
 682 .if ${TARGET_ARCH} == "i386"
 683 _fortran= gnu/usr.bin/cc/f771
 684 .else
 685 _fortran= gnu/usr.bin/cc3/f771
 686 .endif
 687 .endif
 688
 689 .if !defined(NOPERL)
 690 _perl=  gnu/usr.bin/perl/miniperl
 691 .endif
 692
 693 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 694     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 695 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
 696     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 697 .endif
 698
 699 .if defined(RELEASEDIR)
 700 _sysinstall= release/sysinstall
 701 .endif
 702
 703 build-tools:
 704 .for _tool in ${_gcc2_tools} ${_gcc3_tools} \
 705               ${_fortran} ${_perl} ${_libroken4} ${_libkrb5} \
 706               ${_share} ${_sysinstall}
 707         ${ECHODIR} "===> ${_tool} (build-tools)"; \
 708                 cd ${.CURDIR}/${_tool}; \
 709                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 710                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 711                 ${MAKE} DIRPRFX=${_tool}/ all; \
 712                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 713 .endfor
 714
 715 #
 716 # cross-tools: Build cross-building tools
 717 #
 718 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
 719 _elf2exe=       usr.sbin/elf2exe
 720 .endif
 721
 722 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 723 _btxld= usr.sbin/btxld
 724 .endif
 725
 726 cross-tools:
 727 .for _tool in ${_btxld} ${_elf2exe} ${_binutils} \
 728               usr.bin/objformat usr.sbin/crunch/crunchide \
 729               ${_gcc2_cross} ${_gcc3_cross}
 730         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
 731                 cd ${.CURDIR}/${_tool}; \
 732                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 733                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 734                 ${MAKE} DIRPRFX=${_tool}/ all; \
 735                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
 736 .endfor
 737
 738 #
 739 # hierarchy - ensure that all the needed directories are present
 740 #
 741 hierarchy:
 742         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 743
 744 #
 745 # libraries - build all libraries, and install them under ${DESTDIR}.
 746 #
 747 # The list of libraries with dependents (${_prebuild_libs}) and their
 748 # interdependencies (__L) are built automatically by the
 749 # ${.CURDIR}/tools/make_libdeps.sh script.
 750 #
 751 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
 752 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
 753 #
 754 libraries:
 755         cd ${.CURDIR}; \
 756             CCVER=gcc2 ${MAKE} -f Makefile.inc1 _startup_libs2; \
 757             CCVER=gcc3 ${MAKE} -f Makefile.inc1 _startup_libs3; \
 758             ${MAKE} -f Makefile.inc1 _startup_libs; \
 759             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 760             ${MAKE} -f Makefile.inc1 _generic_libs;
 761
 762 # These dependencies are not automatically generated:
 763 #
 764 # gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
 765 # shared libraries for ELF.  The targets for _startup_libs{2,3} are
 766 # specifically built using gcc{2,3}.
 767 #
 768 _startup_libs2= gnu/lib/gcc2/csu gnu/lib/gcc2/libgcc
 769 _startup_libs3= gnu/lib/gcc3/csu gnu/lib/gcc3/libgcc
 770 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
 771 _startup_libs=  lib/csu/${MACHINE_ARCH}-elf
 772 .else
 773 _startup_libs=  lib/csu/${MACHINE_ARCH}
 774 .endif
 775 _startup_libs+= lib/libc
 776
 777 _prebuild_libs=
 778
 779 _generic_libs=  gnu/lib
 780
 781 .if !defined(NOPERL)
 782 _generic_libs+= gnu/usr.bin/perl/libperl
 783 .endif
 784
 785 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 786 _prebuild_libs+=        kerberos5/lib/libasn1
 787 _prebuild_libs+=        kerberos5/lib/libgssapi
 788 _prebuild_libs+=        kerberos5/lib/libkrb5
 789 _prebuild_libs+=        kerberos5/lib/libroken
 790 _generic_libs+= kerberos5/lib
 791 .endif
 792
 793 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
 794                 lib/libncurses lib/libopie lib/libradius lib/libskey \
 795                 lib/libtacplus lib/libutil \
 796                 lib/libz lib/msun
 797
 798 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 799 lib/libskey__L: lib/libcrypt__L lib/libmd__L
 800
 801 _generic_libs+= lib
 802
 803 .if !defined(NOCRYPT)
 804 .if !defined(NO_OPENSSL)
 805 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 806 .if !defined(NO_OPENSSH)
 807 _prebuild_libs+=        secure/lib/libssh
 808 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 809 .endif
 810 .endif
 811 _generic_libs+= secure/lib
 812 .endif
 813
 814 _generic_libs+= usr.bin/lex/lib
 815
 816 .if ${MACHINE_ARCH} == "i386"
 817 _generic_libs+= usr.sbin/pcvt/keycap
 818 .endif
 819
 820 .for _lib in ${_startup_libs2} ${_startup_libs3} ${_startup_libs} \
 821                 ${_prebuild_libs} ${_generic_libs}
 822 ${_lib}__L: .PHONY
 823 .if exists(${.CURDIR}/${_lib})
 824         ${ECHODIR} "===> ${_lib}"; \
 825                 cd ${.CURDIR}/${_lib}; \
 826                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 827                 ${MAKE} DIRPRFX=${_lib}/ all; \
 828                 ${MAKE} DIRPRFX=${_lib}/ install
 829 .endif
 830 .endfor
 831
 832 # only mess with gcc2 for i386 architectures.
 833 #
 834 _startup_libs: ${_startup_libs:S/$/__L/}
 835 .if ${TARGET_ARCH} == "i386"
 836 _startup_libs2: ${_startup_libs2:S/$/__L/}
 837 .else
 838 _startup_libs2:
 839 .endif
 840 _startup_libs3: ${_startup_libs3:S/$/__L/}
 841 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 842 _generic_libs: ${_generic_libs:S/$/__L/}
 843
 844 # library targets must be ordered because there are inter-library
 845 # races (e.g. generation of tconfig.h)
 846 #
 847 .ORDER: ${_startup_libs2:S/$/__L/}
 848 .ORDER: ${_startup_libs3:S/$/__L/}
 849 .ORDER: ${_startup_libs:S/$/__L/}
 850 .ORDER: ${_prebuild_libs:S/$/__L/}
 851 .ORDER: ${_generic_libs:S/$/__L/}
 852
 853 .for __target in clean cleandepend cleandir obj depend includes
 854 .for entry in ${SUBDIR}
 855 ${entry}.${__target}__D: .PHONY
 856         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 857                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 858                 edir=${entry}.${MACHINE_ARCH}; \
 859                 cd ${.CURDIR}/$${edir}; \
 860         else \
 861                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 862                 edir=${entry}; \
 863                 cd ${.CURDIR}/$${edir}; \
 864         fi; \
 865         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 866 .endfor
 867 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 868 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
 869 .endfor
 870 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
 871
 872 # The wmake target is used by /usr/bin/wmake to run make in a
 873 # world build environment.
 874 #
 875 wmake:
 876         @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
 877
 878 wmakeenv:
 879         @echo '${WMAKEENV} /bin/sh'
 880
 881 bmake:
 882         @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
 883
 884 bmakeenv:
 885         @echo '${BMAKEENV} /bin/sh'
 886
 887 tmake:
 888         @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
 889
 890 tmakeenv:
 891         @echo '${TMAKEENV} /bin/sh'
 892
 893 .include <bsd.subdir.mk>
 894