3 # Copyright (c) 1990 The Regents of the University of California.
6 # Written and contributed by W. Jolitz 12/90
8 # Redistribution and use in source and binary forms are permitted provided
9 # that: (1) source distributions retain this entire copyright notice and
10 # comment, and (2) distributions including binaries display the following
11 # acknowledgement: ``This product includes software developed by the
12 # University of California, Berkeley and its contributors'' in the
13 # documentation or other materials provided with the distribution and in
14 # all advertising materials mentioning features or use of this software.
15 # Neither the name of the University nor the names of its contributors may
16 # be used to endorse or promote products derived from this software without
17 # specific prior written permission.
18 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
19 # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
20 # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
22 # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
23 # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.57 2003/02/10 11:35:53 simokawa Exp $
24 # $DragonFly: src/etc/MAKEDEV,v 1.9 2004/07/05 00:22:38 dillon Exp $
26 # Device "make" file. Valid arguments:
27 # all makes all known devices, standard number of units (or close)
28 # std standard devices
29 # jail suitable for a jail(8)
30 # local configuration specific devices
31 # mach-4 mach4&lites+devices for Mach's XFree86 distribution
32 # (see http://www.cs.hut.fi/lites.html for more info on LITES)
35 # ast* ATAPI tape drives
36 # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
37 # sa* SCSI Sequential Access Devices
40 # aac* Adaptec FSA RAID controllers
41 # aacd* Adaptec FSA RAID
42 # acd* ATAPI CD-ROM disks
44 # afd* ATAPI floppy disks
46 # cd* SCSI CD-ROM disks
47 # da* SCSI Direct Access Devices
48 # fd* floppy disk drives (3 1/2", 5 1/4")
49 # fla* M-Systems DiskOnChip
50 # idad* Compaq Smart-2 RAID arrays
51 # ips* IBM ServeRAID controller
53 # mcd* Mitsumi CD-ROM disks
54 # md* Memory (or malloc) disk
55 # mlx* Mylex DAC960 RAID controllers
56 # mlxd* Mylex DAC960 RAID disk volumes
57 # pst* Promise SuperTrak RAID disks
58 # scd* Sony CD-ROM disks
62 # vty* virtual console devices for syscons/pcvt/codrv
65 # mse* Logitech and ATI Inport bus mouse
67 # jogdial Sony VAIO Jogdial
68 # sysmouse Mousesystems mouse emulator for syscons
71 # refclock-* serial ports used by xntpd parse refclocks
74 # tty* general purpose serial ports
75 # cua* dialout serial ports
76 # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
77 # cuaA* Specialix SI/XIO dialout ports
78 # ttyD* Digiboard - 16 dialin ports
79 # cuaD* Digiboard - 16 dialout ports
80 # ttyE* Stallion EasyIO (stl) dialin ports
81 # cuaE* Stallion EasyIO (stl) dialout ports
82 # ttyF* Stallion Brumby (stli) dialin ports
83 # cuaF* Stallion Brumby (stli) dialout ports
84 # ttyR* Rocketport dialin ports
85 # cuaR* Rocketport dialout ports
87 # stlN Stallion EasyIO board N dialin and dialout
88 # stliN Stallion Brumby board N dialin and dialout
91 # pty* set of 32 master and slave pseudo terminals
92 # vty* virtual terminals using syscons/pcvt/codrv console
96 # ppi* Parallel port i/o
97 # pps* Pulse per second timing interface
98 # pcfclock* Parallel time sync interface
105 # usb* USB bus control device
106 # ucom* USB serial devices
107 # ugen* generic USB device
108 # uhid* Human Interface Device (HID)
112 # urio* Diamond Rio 500
113 # uscanner* USB scanners
115 # SCSI devices (other than CD-ROM, tape and disk):
116 # ch* SCSI Media-Changer (juke box) driver
117 # pt* Processor Type (HP scanner, as one example)
118 # pass* CAM Passthrough device
119 # ses* SES (SCSI Environmental Services) and
120 # SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
122 # PC-CARD (previously called PCMCIA) support
123 # card* PC-CARD slots
126 # i4b isdnd call control device
127 # i4bctl debugging control device
128 # i4btrc* trace data interface(s), one per passive card
129 # i4btel* telephony interface(s)
130 # i4bteld* telephony dialout interface(s)
131 # i4brbch* raw b channel access device(s)
133 # Special purpose devices:
134 # acpi ACPI control device
135 # apm Advanced Power Management BIOS
136 # apmctl APM BIOS control device
138 # crypto crypto interface
140 # tw* xten power controller
141 # snd* various sound cards
142 # pcaudio PCM audio driver
143 # socksys iBCS2 socket system driver
144 # vat VAT compatibility audio driver (requires snd*)
145 # gsc Genius GS-4500 hand scanner
147 # tun* Tunneling IP device
148 # tap* Ethernet Tunneling device
149 # snp* tty snoop devices
150 # spigot Video Spigot video acquisition card
151 # ctx* Cortex-I video acquisition card
152 # meteor* Matrox Meteor video acquisition card (pci)
153 # bktr* Bt848 based video acquisition card (pci)
154 # labpc* National Instrument's Lab-PC and LAB-PC+
155 # perfmon CPU performance-monitoring counters
156 # pci PCI configuration-space access from user mode
157 # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
158 # kbd keyboard devices
159 # elan-mmcr AMD Elan support (e.g. mmap MMCR)
160 # agpgart AGP interface
161 # cfs* Coda Distributed Filesystem
162 # nsmb* SMB/CIFS protocol interface
165 if [ -n "$MAKEDEVPATH" ]; then
172 # Usage: die exitcode msg
178 # Convert integer to partition name
183 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
184 8) p=i;; 9) p=j;; 10) p=k;; 11) p=l;; 12) p=m;; 13) p=n;; 14) p=o;; 15) p=p;;
190 # Convert integer to slice name
202 # Convert disk (type, unit, slice, partition) to minor number
205 echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | ($4 & 7) | ($4 & 8) << 17))
208 # Override mknod(2) to add extra handling to it.
210 for i in `IFS=':'; echo $PATH`; do
211 if [ -x "${i}/mknod" ]; then
219 4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";;
220 5) "$mknod" "$@" || die 2 "$mknod $@ failed";;
221 *) die 2 "bad node: mknod $@";;
225 # Convert tape (ctrl, unit, mode, access) to minor number
228 echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
231 # Convert the last character of a tty name to a minor number.
236 a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
237 h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
238 o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
245 # Convert a unit number to a minor number.
248 echo $(((($1 >> 8) << 16) | ($1 % 256)))
251 # For the stallion devices tty[EF]
252 # stallion major letter card iscallout
265 if [ $iscallout -gt 0 ]; then
273 *) die 1 "Invalid stl card number $card";;
276 # make the mem interface for extracting stats & loading microcode.
277 # 0x1000000 + card number
278 mknod staliomem$card c $major 0x0100000$card
280 while [ $port -lt $maxport ]; do
281 minor=$(($minorbase + $card * 1048576 + $port))
282 if [ $port -ge 32 ]; then
283 minor=$(($minor + 65504))
285 unit=$(($card * 64 + $port))
287 mknod ${pref}${letter}$unit c $major $minor $owner
288 mknod ${pref}i${letter}$unit c $major $(($minor + 32)) $owner
289 mknod ${pref}l${letter}$unit c $major $(($minor + 64)) $owner
294 # Raw partition for disks
297 # Compatibility slice for disks
300 # Raw slice for disks
304 disk_umask=037 # allow group operator to read disks
305 tape_umask=017 # allow group operator to read/write tapes
311 sh MAKEDEV std # standard
312 sh MAKEDEV fd0 fd1 # bdev, floppy disk
313 sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk
314 sh MAKEDEV ata # cdev, ATA control
315 sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk
316 sh MAKEDEV ar0 ar1 # bdev, ATA RAID disk
317 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
318 sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk
319 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
320 sh MAKEDEV vn0 # bdev, virtual disk
321 sh MAKEDEV cd0 mcd0 scd0 # bdev, cdrom
322 sh MAKEDEV sa0 wt0 # bdev, tape
323 sh MAKEDEV vty12 # cdev, virtual tty
324 sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
325 sh MAKEDEV pty0 # cdev, pseudo tty
326 sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
327 sh MAKEDEV zs0 # big-Alpha serial tty
328 sh MAKEDEV kbd0 kbd1 # cdev, keyboard
329 sh MAKEDEV mse0 psm0 jogdial sysmouse # cdev, mouse
330 sh MAKEDEV pcaudio speaker snd0 # cdev, noise
331 sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
332 sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
333 sh MAKEDEV iic0 iic1 # cdev, I2C device
334 sh MAKEDEV smb0 smb1 # cdev, SMBus device
335 sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
336 sh MAKEDEV usb1 uhid1 ums1 ulpt1 ugen1 # cdev, USB devices
337 sh MAKEDEV usb2 usb3 usb4 usb5 # cdev, USB devices
338 sh MAKEDEV urio0 uscanner0 umodem0 # cdev, USB devices too
339 sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
340 sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
341 sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network
342 sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
343 sh MAKEDEV acpi # cdev, laptop
344 sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
345 sh MAKEDEV pass4 xpt2 # cdev, CAM
346 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
347 sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
348 sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
349 sh MAKEDEV agpgart # cdev, AGP
350 sh MAKEDEV nsmb0 # cdev, SMB/CIFS
351 sh MAKEDEV twed0 # 3ware
352 sh MAKEDEV crypto # cdev, crypto
353 sh MAKEDEV fw0 fw1 fw2 fw3 fwmem0 # cdev, firewire
356 # a much restricted set of the above, to save precious i-nodes on the
359 sh MAKEDEV std # standard
360 sh MAKEDEV fd0 # bdev, floppy disk
361 sh MAKEDEV da0 # bdev, SCSI disk
362 sh MAKEDEV ad0 # bdev, ATA disk
363 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
364 sh MAKEDEV wd0 # bdev, OLD disk
365 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
366 sh MAKEDEV vn0 # bdev, virtual disk
367 sh MAKEDEV cd0 # bdev, cdrom
368 sh MAKEDEV sa0 # bdev, tape
369 sh MAKEDEV vty2 # cdev, virtual tty
370 sh MAKEDEV cuaa0 # cdev, serial tty
371 sh MAKEDEV pty0 # cdev, pseudo tty
372 sh MAKEDEV ttyd0 # cdev, serial tty
373 sh MAKEDEV zs0 # big-Alpha serial tty
374 sh MAKEDEV kbd0 # cdev, keyboard
375 sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
376 sh MAKEDEV lpt0 # cdev, printer
377 sh MAKEDEV ppi0 # cdev, parallel port
378 sh MAKEDEV iic0 # cdev, I2C device
379 sh MAKEDEV smb0 # cdev, SMBus device
380 sh MAKEDEV ums0 # cdev, USB devices
381 sh MAKEDEV tun0 # cdev, network
382 sh MAKEDEV tap0 # cdev, network
383 sh MAKEDEV ch0 # cdev, miscellaneous
384 sh MAKEDEV apm apmctl card0 # cdev, laptop
385 sh MAKEDEV pass1 xpt1 # cdev, CAM
386 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
387 sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN
388 sh MAKEDEV i4brbch0 # cdev, ISDN
393 mknod console c 0 0; chmod 600 console
394 mknod kmem c 2 1 root:kmem; chmod 640 kmem
395 mknod mem c 2 0 root:kmem; chmod 640 mem
396 mknod null c 2 2; chmod 666 null
397 mknod random c 2 3; chmod 644 random
398 mknod urandom c 2 4; chmod 644 urandom
399 mknod zero c 2 12; chmod 666 zero
400 mknod io c 2 14; chmod 600 io
401 mknod tty c 1 0; chmod 666 tty
402 mknod klog c 7 0; chmod 600 klog
403 mknod stdin c 22 0; chmod 666 stdin
404 mknod stdout c 22 1; chmod 666 stdout
405 mknod stderr c 22 2; chmod 666 stderr
406 mknod pci c 78 0; chmod 644 pci
409 while [ $i -lt 64 ]; do
420 rm mem kmem pci io klog console # for security
421 ln -sf null mem # for libkvm (ab)users
422 ln -sf null kmem # --//--
431 mknod timezone c 26 0
434 # Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
437 u=`expr $i : '..\(.*\)'`
438 if [ -z "${u}" ]; then u=0; fi
439 # default density, 512b blocks
440 mknod rwt${u} c 10 $(( 0 + $u)) root:operator
441 mknod nrwt${u} c 10 $(( 4 + $u)) root:operator
442 # default density, 1024b blocks
443 # mknod rWt${u} c 10 $((64 + $u)) root:operator
444 # mknod nrWt${u} c 10 $((68 + $u)) root:operator
445 mknod rwt${u}b c 10 $((16 + $u)) root:operator # 60 megabytes
446 mknod nrwt${u}b c 10 $((20 + $u)) root:operator
447 mknod rwt${u}c c 10 $((24 + $u)) root:operator # 120 megabytes
448 mknod nrwt${u}c c 10 $((28 + $u)) root:operator
449 mknod rwt${u}d c 10 $((32 + $u)) root:operator # 150 megabytes
450 mknod nrwt${u}d c 10 $((36 + $u)) root:operator
451 # mknod rwt${u}e c 10 $((40 + $u)) root:operator # 300 megabytes?
452 # mknod nrwt${u}e c 10 $((44 + $u)) root:operator
453 # mknod rwt${u}f c 10 $((48 + $u)) root:operator # 600 megabytes?
454 # mknod nrwt${u}f c 10 $((52 + $u)) root:operator
459 aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|ipsd*s*|md*s*|mlxd*s*|pst*s*|twed*s*|vn*s*|wd*s*|wfd*s*)
462 aacd*s*) name=aacd; chr=151;;
463 ad*s*) name=ad; chr=116;;
464 ar*s*) name=ar; chr=157;;
465 afd*s*) name=afd; chr=118;;
466 amrd*s*) name=amrd; chr=133;;
467 da*s*) name=da; chr=13;;
468 fla*s*) name=fla; chr=102;;
469 idad*s*) name=idad; chr=109;;
470 ipsd*s*) name=ipsd; chr=176;;
471 md*s*) name=md; chr=95;;
472 mlxd*s*) name=mlxd; chr=131;;
473 pst*s*) name=pst; chr=168;;
474 twed*s*) name=twed; chr=147;;
475 vn*s*) name=vn; chr=43;;
476 wd*s*) name=wd; chr=3;;
477 wfd*s*) name=wfd; chr=87;;
480 aacd*s*|amrd*s*|idad*s*|ipsd*s*|mlxd*s*|twed*s*)
481 unit=`expr $i : '....\([0-9]*\)s'`
482 slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
483 part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
485 afd*s*|fla*s*|pst*s*|wfd*s*)
486 unit=`expr $i : '...\([0-9]*\)s'`
487 slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
488 part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
491 unit=`expr $i : '..\([0-9]*\)s'`
492 slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
493 part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
497 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
502 slicename=`dkitos $slice`
503 minor=`dkminor 0 $unit $slice $dkrawpart`
504 mknod $name$unit$slicename c $chr $minor root:operator
505 rm -f r$name$unit$slicename
509 0) slice=$oldslice ;;
511 for part in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
513 minor=`dkminor 0 $unit $slice $part`
514 partname=`dkitop $part`
515 mknod $name$unit$slicename$partname \
516 c $chr $minor root:operator
517 rm -f r$name$unit$slicename$partname
523 echo bad partition for disk in: $i
528 echo bad slice for disk in: $i
533 echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
541 unit=`expr $i : '..\(.*\)'`
545 mknod ${name}${unit} c $chr $(($unit * 64)) root:operator
546 rm -f r${name}${unit}
547 # Fake BSD partitions
548 for i in a b c d e f g h
550 ln -f ${name}${unit} ${name}${unit}$i
551 rm -f r${name}${unit} r${name}${unit}$i
553 # User-readable and programmer-readable name sets
555 mknod ${name}${unit}.1720 c $chr $(($unit * 64 + 1)) \
557 rm -f r${name}${unit}.1720
558 # ln -f ${name}${unit}.1720 ${name}${unit}135hs21
559 # rm -f r${name}${unit}135hs21
561 mknod ${name}${unit}.1480 c $chr $(($unit * 64 + 2)) \
563 rm -f r${name}${unit}.1480
564 # ln -f ${name}${unit}.1480 ${name}${unit}135hs18
565 # rm -f r${name}${unit}135hs18
566 # ln -f ${name}${unit}.1480 ${name}${unit}96hs18
567 # rm -f r${name}${unit}96hs18
569 mknod ${name}${unit}.1440 c $chr $(($unit * 64 + 3)) \
571 rm -f r${name}${unit}.1440
572 # ln -f ${name}${unit}.1440 ${name}${unit}135
573 # rm -f r${name}${unit}135
574 # ln -f ${name}${unit}.1440 ${name}${unit}135ds18
575 # rm -f r${name}${unit}135ds18
576 # ln -f ${name}${unit}.1440 ${name}${unit}96ds18
577 # rm -f r${name}${unit}96ds18
579 mknod ${name}${unit}.1200 c $chr $(($unit * 64 + 4)) \
581 rm -f r${name}${unit}.1200
582 # ln -f ${name}${unit}.1200 ${name}${unit}96
583 # rm -f r${name}${unit}96
584 # ln -f ${name}${unit}.1200 ${name}${unit}96ds15
585 # rm -f r${name}${unit}96ds15
586 # ln -f ${name}${unit}.1200 ${name}${unit}135ds15
587 # rm -f r${name}${unit}135ds15
589 mknod ${name}${unit}.820 c $chr $(($unit * 64 + 5)) \
591 rm -f r${name}${unit}.820
592 # ln -f ${name}${unit}.820 ${name}${unit}96hs10
593 # rm -f r${name}${unit}96hs10
594 # ln -f ${name}${unit}.820 ${name}${unit}135hs10
595 # rm -f r${name}${unit}135hs10
597 mknod ${name}${unit}.800 c $chr $(($unit * 64 + 6)) \
599 rm -f r${name}${unit}.800
600 # ln -f ${name}${unit}.800 ${name}${unit}96ds10
601 # rm -f r${name}${unit}96ds10
602 # ln -f ${name}${unit}.800 ${name}${unit}135ds10
603 # rm -f r${name}${unit}135ds10
605 mknod ${name}${unit}.720 c $chr $(($unit * 64 + 7)) \
607 rm -f r${name}${unit}.720
608 # ln -f ${name}${unit}.720 ${name}${unit}96ds9
609 # rm -f r${name}${unit}96ds9
610 # ln -f ${name}${unit}.720 ${name}${unit}135ds9
611 # rm -f r${name}${unit}135ds9
613 mknod ${name}${unit}.360 c $chr $(($unit * 64 + 8)) \
615 rm -f r${name}${unit}.360
616 # ln -f ${name}${unit}.360 ${name}${unit}48
617 # rm -f r${name}${unit}48
618 # ln -f ${name}${unit}.360 ${name}${unit}48ds9
619 # rm -f r${name}${unit}48ds9
621 mknod ${name}${unit}.640 c $chr $(($unit * 64 + 9)) \
623 rm -f r${name}${unit}.640
624 # ln -f ${name}${unit}.640 ${name}${unit}96ds8
625 # rm -f r${name}${unit}96ds8
626 # ln -f ${name}${unit}.640 ${name}${unit}135ds8
627 # rm -f r${name}${unit}135ds8
629 mknod ${name}${unit}.1232 c $chr $(($unit * 64 + 10)) \
631 rm -f r${name}${unit}.1232
632 # ln -f ${name}${unit}.1232 ${name}${unit}96ds8
633 # rm -f r${name}${unit}96ds8
634 # ln -f ${name}${unit}.1232 ${name}${unit}135ds8
635 # rm -f r${name}${unit}135ds8
638 echo bad unit for disk in: $i
644 aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|ipsd*|md*|mlxd*|pst*|twed*|vn*|wd*|wfd*)
647 aacd*) name=aacd; chr=151;;
648 ad*) name=ad; chr=116;;
649 ar*) name=ar; chr=157;;
650 afd*) name=afd; chr=118;;
651 amrd*) name=amrd; chr=133;;
652 da*) name=da; chr=13;;
653 fla*) name=fla; chr=102;;
654 idad*) name=idad; chr=109;;
655 ipsd*) name=ipsd; chr=176;;
656 md*) name=md; chr=95;;
657 mlxd*) name=mlxd; chr=131;;
658 pst*) name=pst; chr=168;;
659 twed*) name=twed; chr=147;;
660 vn*) name=vn; chr=43;;
661 wd*) name=wd; chr=3;;
662 wfd*) name=wfd; chr=87;;
665 aacd*|amrd*|idad*|ipsd*|mlxd*|twed*)
666 unit=`expr $i : '....\(.*\)'`
669 unit=`expr $i : '...\(.*\)'`
672 unit=`expr $i : '..\(.*\)'`
676 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
677 for slicepartname in s0h s1h s2 s3 s4
679 sh MAKEDEV $name$unit$slicepartname
683 echo bad unit for disk in: $i
693 unit=`expr $i : '...\(.*\)'`
695 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
696 for part in 0 1 2 3 4 5 6 7
698 minor=`dkminor 0 $unit 0 $part`
699 partname=`dkitop $part`
700 mknod $name$unit$partname c $chr $minor root:operator
701 rm -f r$name$unit$partname
705 echo bad unit for disk in: $i
711 # SCSI processor type driver
715 unit=`expr $i : 'pt\([0-9][0-9]*\)'`
716 if [ -z "${unit}" ]; then
719 unit=$(($unit + 1 - 1))
720 mknod ${name}${unit} c $chr `unit2minor $unit`
723 # SCSI SES/SAF-TE type driver
727 unit=`expr $i : 'ses\([0-9][0-9]*\)'`
728 if [ -z "${unit}" ]; then
731 unit=$(($unit + 1 - 1))
732 mknod ${name}${unit} c $chr `unit2minor $unit`
734 # SCSI target mode sample driver
738 unit=`expr $i : 'targ\([0-9][0-9]*\)'`
739 if [ -z "${unit}" ]; then
742 unit=$(($unit + 1 - 1))
743 mknod ${name}${unit} c $chr `unit2minor $unit`
744 mknod ${name}.ctl c $chr 0xffff00ff
747 # CAM transport layer device
749 # This major number is temporary
752 units=`expr $i : 'xpt\(.*\)'`
753 if [ -z "${units}" ]; then
757 while [ $i -lt $units ]; do
760 mknod $dname c $chr `unit2minor $i` root:operator
765 # CAM passthrough device
767 # This major number is temporary
770 units=`expr $i : 'pass\(.*\)'`
771 if [ -z "${units}" ]; then
775 while [ $i -lt $units ]; do
778 mknod $dname c $chr `unit2minor $i` root:operator
783 class=`expr $i : 'pty\(.*\)'`
786 1) offset=32 name=q;;
787 2) offset=64 name=r;;
788 3) offset=96 name=s;;
789 # Note that xterm (at least) only look at p-s.
790 4) offset=128 name=P;;
791 5) offset=160 name=Q;;
792 6) offset=192 name=R;;
793 7) offset=224 name=S;;
794 # This still leaves [tuTU].
795 *) echo bad unit for pty in: $i;;
801 while [ $i -lt 32 ]; do
802 # This was an awk substr() before.
803 c=$(echo 0123456789abcdefghijklmnopqrstuv |
804 dd bs=1 skip=$i count=1 2>/dev/null)
805 mknod tty$name$c c 5 $(($offset + $i))
806 mknod pty$name$c c 6 $(($offset + $i))
816 unit=`expr $i : '..\(.*\)'`
820 [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
821 mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
822 ln -f sa${unit}.ctl rsa${unit}.ctl
825 mknod sa${unit}.${m} c $chr \
826 `saminor 0 ${unit} ${m} 0` root:operator
827 ln -f sa${unit}.${m} rsa${unit}.${m}
828 mknod nsa${unit}.${m} c $chr \
829 `saminor 0 ${unit} ${m} 1` root:operator
830 ln -f nsa${unit}.${m} nrsa${unit}.${m}
831 mknod esa${unit}.${m} c $chr \
832 `saminor 0 ${unit} ${m} 2` root:operator
833 ln -f esa${unit}.${m} ersa${unit}.${m}
835 ln -f sa${unit}.0 sa${unit}
836 ln -f sa${unit}.0 rsa${unit}.0
837 ln -f sa${unit}.0 rsa${unit}
838 ln -f nsa${unit}.0 nsa${unit}
839 ln -f nsa${unit}.0 nrsa${unit}.0
840 ln -f nsa${unit}.0 nrsa${unit}
841 ln -f esa${unit}.0 esa${unit}
842 ln -f esa${unit}.0 ersa${unit}.0
843 ln -f esa${unit}.0 ersa${unit}
846 echo bad unit for tape in: $i
854 unit=`expr $i : '..\(.*\)'`
856 ch*) name=ch; chr=17;;
860 mknod ${name}${unit} c $chr $unit root:operator
863 echo bad unit for media changer in: $i
870 mknod ata c 159 0 root:operator
874 unit=`expr $i : '...\(.*\)'`
878 mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator
880 mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator
881 chmod 640 nast${unit}
884 echo bad unit for tape in: $i
892 units=`expr $i : '...\(.*\)t'`;
893 tracks=`expr $i : '.*t\(.*\)'`;
896 if [ -z "${units}" ]; then
899 if [ -z "${tracks}" ]; then
902 if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then
904 while [ $i -le $units ]; do
908 while [ $j -le ${tracks} ]; do
909 mknod ${dname}t$j c $chr \
910 $((($i * 8) + (65536 * $j))) \
917 echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
925 acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
926 cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
927 mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
928 scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
930 if [ -z "${units}" ]; then
933 if [ "${units}" -le 31 ]; then
935 while [ $i -le $units ]; do
938 mknod ${dname}a c $chr $(($i * 8)) root:operator
941 ln -f ${dname}a ${dname}c;;
943 mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator;;
950 echo "$i is invalid -- can't have more than 32 cd devices"
957 unit=`expr $i : '...\(.*\)'`
961 mknod wcd${unit}a c $chr $(($unit * 8 + 0)) root:operator
962 mknod wcd${unit}c c $chr $(($unit * 8 + 2)) root:operator
963 ln -f wcd${unit}a rwcd${unit}a
964 ln -f wcd${unit}c rwcd${unit}c
965 chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
968 echo bad unit for disk in: $i
976 unit=`expr $i : '...\(.*\)'`
980 mknod rwst${unit} c $chr $(($unit * 8 + 0)) root:operator
981 chmod 640 rwst${unit}
988 unit=`expr $i : 'iic\(.*\)'`
989 mknod iic$unit c 105 `unit2minor $unit`
993 unit=`expr $i : 'smb\(.*\)'`
994 mknod smb$unit c 106 `unit2minor $unit`
998 unit=`expr $i : 'pcfclock\(.*\)'`
999 mknod pcfclock$unit c 140 `unit2minor $unit`
1003 unit=`expr $i : 'ppi\(.*\)'`
1004 mknod ppi$unit c 82 `unit2minor $unit`
1008 unit=`expr $i : 'pps\(.*\)'`
1009 mknod pps$unit c 89 `unit2minor $unit`
1013 mknod usb c 108 255 root:operator
1019 unit=`expr $i : 'usb\(.*\)'`
1020 mknod usb$unit c 108 `unit2minor $unit` root:operator
1026 unit=`expr $i : 'ucom\(.*\)'`
1027 minor=$(($unit + 128))
1028 minor=`unit2minor $(($unit + 128))`
1029 mknod ucom$unit c 138 $minor uucp:dialer
1035 unit=`expr $i : 'uhid\(.*\)'`
1036 mknod uhid$unit c 122 `unit2minor $unit` root:operator
1042 unit=`expr $i : 'ums\(.*\)'`
1043 mknod ums$unit c 111 `unit2minor $unit` root:operator
1048 unit=`expr $i : 'ulpt\(.*\)'`
1049 minor=`unit2minor $unit`
1050 mknod ulpt$unit c 113 $minor
1051 minor=`unit2minor $(($unit + 64))`
1052 mknod unlpt$unit c 113 $minor # and the 'no prime' version
1057 unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
1058 endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
1059 if [ -z "${unit}" ]; then
1060 echo $i - Invalid unit number
1062 if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15
1063 mknod ugen$unit c 114 \
1064 `unit2minor $(($unit * 16))` root:operator
1066 while [ $i -lt 16 ]; do
1067 mknod ugen$unit.$i c 114 \
1068 `unit2minor $(($unit * 16 + $i))` root:operator
1072 minor=`unit2minor $(($unit * 16 + $endpoint))`
1073 mknod ugen$unit.$endpoint c 114 $minor root:operator
1080 unit=`expr $i : 'urio\(.*\)'`
1081 mknod urio$unit c 143 `unit2minor $unit` root:operator
1087 unit=`expr $i : 'uscanner\(.*\)'`
1088 mknod uscanner$unit c 156 `unit2minor $unit` root:operator
1094 unit=`expr $i : 'umodem\(.*\)'`
1095 mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer
1100 unit=`expr $i : 'lpt\(.*\)'`
1101 mknod lpt$unit c 16 `unit2minor $unit`
1102 mknod lpctl$unit c 16 `unit2minor $(($unit + 128))`
1105 # Use this to create virtual consoles for syscons, pcvt or codrv
1107 # use as MAKEDEV vtyNN to create NN entries
1110 units=`expr $i : 'vty\(.*\)'`
1112 while [ $i -lt $units ]; do
1113 mknod ttyv$(printf %01x $i) c $chr `unit2minor $i`
1116 ln -fs ttyv0 vga # XXX X still needs this pccons relic
1120 units=`expr $i : 'nmdm\(.*\)'`
1123 while [ $i -lt $units ]; do
1124 minor=`unit2minor $i`
1125 minor=$(($minor + $minor))
1126 mknod nmdm${i}A c $chr $minor
1127 mknod nmdm${i}B c $chr $(($minor + 1))
1133 nbpf=`expr $i : 'bpf\(.*\)$'`
1135 while [ $unit -le $nbpf ]; do
1136 mknod bpf$unit c 23 `unit2minor $unit`
1142 mknod speaker c 26 0
1147 unit_low=`expr $i : 'cua.*\(.\)$'`
1154 unit_high=`expr $i : 'cuaa\(.\).$'`
1155 m_high=`ttyminor $unit_high`
1158 unit=$unit_high$unit_low
1159 m=$(($m_high << 16 | `ttyminor $unit_low`))
1160 mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer
1161 mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer
1162 mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer
1167 mknod crypto c 70 0 root:operator
1172 unit=`expr $i : 'fwmem\(.*\)'`
1173 mknod fwmem$unit c 127 $((1<<24 | $unit)) root:operator
1174 chmod 660 fwmem$unit
1178 unit=`expr $i : 'fw\(.*\)'`
1179 mknod fw$unit c 127 $unit root:operator
1183 tty?|tty0?|ttyd?|ttyd??)
1184 unit_low=`expr $i : 'tty.*\(.\)$'`
1191 unit_high=`expr $i : 'ttyd\(.\).$'`
1192 m_high=`ttyminor $unit_high`
1195 unit=$unit_high$unit_low
1196 m=$(($m_high << 16 | `ttyminor $unit_low`))
1197 mknod ttyd$unit c 28 $m
1198 mknod ttyid$unit c 28 $(($m | 32))
1199 mknod ttyld$unit c 28 $(($m | 64))
1204 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1205 g h i j k l m n o p q r s t u v"
1207 card=`expr $i : 'cua.*\(.\)$'`
1208 for unit in $portlist
1210 minor=`ttyminor $unit`
1211 minor=$(($card * 65536 + $minor))
1213 mknod cuac$name c $major $(($minor + 128)) uucp:dialer
1214 mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer
1215 mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer
1221 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1222 g h i j k l m n o p q r s t u v"
1224 card=`expr $i : 'tty.*\(.\)$'`
1225 for unit in $portlist
1227 minor=`ttyminor $unit`
1228 minor=$(($card * 65536 + $minor))
1230 mknod ttyc$name c $major $minor
1231 mknod ttyic$name c $major $(($minor + 32))
1232 mknod ttylc$name c $major $(($minor + 64))
1236 # RISCom8 'rc' driver entries
1240 unit=`expr $i : 'cua.*\(.\)$'`
1242 mknod cuam$unit c 63 $(($m + 128)) uucp:dialer
1247 unit=`expr $i : 'tty.*\(.\)$'`
1249 mknod ttym$unit c 63 $m
1253 # Note: these are 'base 1' to match the numbers on the panels, and to match
1254 # the manual that comes with the system.
1257 nports=`expr $i : 'ttyA\(.*\)$'`
1259 while [ $port -le $nports ]; do
1260 minor=$(($port - 1))
1261 name=$(printf %02d $port)
1262 mknod ttyA$name c $major $minor
1263 mknod ttyiA$name c $major $(($minor + 65536))
1264 mknod ttylA$name c $major $(($minor + 131072))
1267 # For the user-mode control program, 'sicontrol'
1268 mknod si_control c 68 262144
1274 nports=`expr $i : 'cuaA\(.*\)$'`
1276 while [ $port -le $nports ]; do
1277 minor=$(($port - 1))
1278 name=$(printf %02d $port)
1279 mknod cuaA$name c $major $(($minor + 128)) uucp:dialer
1280 mknod cuaiA$name c $major $(($minor + 128 + 65536)) \
1282 mknod cualA$name c $major $(($minor + 128 + 131072)) \
1289 # Alpha AS8[24]00 (TurboLaser) console.
1291 unit=`expr $i : 'zs.*\(.\)$'`
1293 mknod zs$unit c 135 $m
1296 # Digiboard PC/?? 16 port card.
1297 # The current scheme of minor numbering is:
1299 # unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
1301 # CARD bitfield in future versions may be extended to 3 bits.
1306 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1308 card=`expr $i : 'tty.*\(.\)$'`
1309 for unit in $portlist
1311 minor=`ttyminor $unit`
1312 minor=$(($card * 65536 + $minor))
1314 mknod ttyD$name c $major $minor
1315 mknod ttyiD$name c $major $(($minor + 32))
1316 mknod ttylD$name c $major $(($minor + 64))
1322 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1324 card=`expr $i : 'cua.*\(.\)$'`
1325 for unit in $portlist
1327 minor=`ttyminor $unit`
1328 minor=$(($card * 65536 + $minor))
1330 mknod cuaD$name c $major $(($minor + 128)) uucp:dialer
1331 mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer
1332 mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer
1337 # Stallion multi serial cards (stl and stli drivers)
1339 # These drivers reserve 64 minor devices per board, even if the board
1340 # supports only 4 devices. We default to creating only 8 of the 64 devices
1341 # to keep /dev from getting too large (which => slow). The last part of the
1342 # arg is the board number to create ports for. So:
1343 # ttyE0 will create 8 dialin ports ttyE0-ttyE7, plus ttyiE* and ttylE*
1344 # cuaE0 will create 8 dialout ports cuaE0-cuaE7, plus cuaiE* and cualE*
1345 # ttyE1 will create 8 dialin ports ttyE64-ttyE71, plus ttyiE* and ttylE*
1347 # If you have EasyConnect 8/32 or 8/64 cards, you will need to change the
1348 # definition of "maxport" below to get nodes for the full 32 or 64
1351 # Note that the mapping of minor device numbers (with the hole between
1352 # 32-64k) is a bit odd to keep compatibility with ttyd? for
1353 # lock/initial devices.
1354 # Minor device field for the ports is
1355 # card{3} unused{4} unit-msb{1} unused{8} callout{1} lock{1} init{1} unit-lsbs{5}
1356 # for the mem device is
1358 # (For stl, there is only 1 mem device per system; for stli, one per board)
1361 stallion 72 E `expr $i : 'tty.*\(.\)$'` 0
1364 stallion 72 E `expr $i : 'cua.*\(.\)$'` 1
1367 card=`expr $i : 'stl\(.\)$'`
1368 stallion 72 E $card 0
1369 stallion 72 E $card 1
1373 stallion 75 F `expr $i : 'tty.*\(.\)$'` 0
1376 stallion 75 F `expr $i : 'cua.*\(.\)$'` 1
1379 card=`expr $i : 'stl\(.\)$'`
1380 stallion 75 F $card 0
1381 stallion 75 F $card 1
1385 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1386 modulelist="a b c d"
1388 card=`expr $i : 'tty.*\(.\)$'`
1389 for unit in $modulelist
1391 moduleminor=`ttyminor $unit`
1392 moduleminor=$(($moduleminor % 10 * 16))
1395 for unit in $portlist
1397 minor=`ttyminor $unit`
1398 minor=$(($card * 65536 + $minor + $moduleminor))
1399 name=$card$modulename$unit
1401 mknod ttyM$name c $major $minor
1402 mknod ttyiM$name c $major $(($minor + 64))
1403 mknod ttylM$name c $major $(($minor + 128))
1410 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1411 modulelist="a b c d"
1413 card=`expr $i : 'cua.*\(.\)$'`
1414 for unit in $modulelist
1416 moduleminor=`ttyminor $unit`
1417 moduleminor=$(($moduleminor % 10 * 16))
1420 for unit in $portlist
1422 minor=`ttyminor $unit`
1423 minor=$(($card * 65536 + $minor + $moduleminor))
1424 name=$card$modulename$unit
1426 mknod cuaM$name c $major $(($minor + 262144)) \
1428 mknod cuaiM$name c $major $(($minor + 64 + 262144)) \
1430 mknod cualM$name c $major $(($minor + 128 + 262144)) \
1440 MINOR=$(($BOARD * 65536))
1442 dmesg | while read first rest; do
1450 rm -f ttyR* ttyiR* ttylR*
1451 for i in $controllers; do
1453 dmesg | while read first bar ports rest; do
1461 echo -n "Creating $ndevices devices for $i: "
1463 while [ $dev -lt $ndevices ]; do
1464 mknod ttyR$Rnum c $major $MINOR
1465 mknod ttyiR$Rnum c $major $(($MINOR + 32))
1466 mknod ttylR$Rnum c $major $(($MINOR + 64))
1468 MINOR=$(($MINOR + 1))
1471 BOARD=$(($BOARD + 1))
1472 MINOR=$(($BOARD * 65536))
1480 MINOR=$(($BOARD * 65536))
1482 dmesg | while read first rest; do
1490 rm -f cuaR* cuaiR* cualR*
1491 for i in $controllers; do
1493 dmesg | while read first bar ports rest; do
1501 echo -n "Creating $ndevices devices for $i: "
1503 while [ $dev -lt $ndevices ]; do
1504 mknod cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer
1505 mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
1507 mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \
1510 MINOR=$(($MINOR + 1))
1513 BOARD=$(($BOARD + 1))
1514 MINOR=$(($BOARD * 65536))
1520 unit=`expr $i : 'mse\(.*\)'`
1522 # non-blocking for X11
1523 mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))`
1527 unit=`expr $i : 'psm\(.*\)'`
1529 # non-blocking for X11
1530 mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))`
1534 name=`expr $i : 'mouse\(.*\)'`
1535 if [ ! -c $name ]; then
1536 $0 $name # make the appropriate device
1542 mknod pcaudio c 24 0
1543 mknod pcaudioctl c 24 128
1547 mknod socksys c 41 0
1550 chmod 666 socksys nfsd spx
1555 # changes from Linux voxware
1556 # minor Linux FreeBSD
1557 # 8 sequencer2 (aka music0) music0
1558 # 17 patmgr0 sequencer1
1559 # 33 patmgr1 sequencer2
1562 unit=`expr $i : 'snd\(.*\)'`
1565 # XXX write this less verbosely, like std
1566 snd_security_hole=0 # XXX
1567 umask $snd_security_hole
1569 ln -fs mixer$unit mixer
1570 ln -fs sequencer$unit sequencer
1572 ln -fs audio$unit audio
1573 ln -fs dspW$unit dspW
1574 ln -fs music$unit music
1576 ln -fs dsp$unit.0 dsp$unit
1577 ln -fs audio$unit.0 audio$unit
1578 ln -fs dspW$unit.0 dspW$unit
1580 mknod mixer$unit c $chr `unit2minor $(($unit * 16 + 0))`
1581 mknod sequencer$unit c $chr `unit2minor $(($unit * 16 + 1))`
1582 mknod midi$unit c $chr `unit2minor $(($unit * 16 + 2))`
1586 minor=$(($chn * 65536 + $unit * 16))
1587 mknod dsp$unit.$chn c $chr $(($minor + 3))
1588 mknod audio$unit.$chn c $chr $(($minor + 4))
1589 mknod dspW$unit.$chn c $chr $(($minor + 5))
1592 mknod sndstat c $chr 6
1593 # minor number 7 is unused
1594 mknod music$unit c $chr `unit2minor $(($unit * 16 + 8))`
1595 mknod pss$unit c $chr `unit2minor $(($unit * 16 + 9))`
1596 # minor numbers 10-15 are unused
1601 mknod vatio c 25 128
1606 unit=`expr $i : 'gsc\(.*\)'`
1607 mknod gsc${unit} c 47 `unit2minor $unit`
1608 mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))`
1609 mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))`
1610 mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))`
1611 chmod 666 gsc${unit}*
1615 mknod acpi c 152 0 root:operator
1619 mknod apm c 39 0 root:operator
1624 mknod apmctl c 39 8 root:operator
1629 unit=`expr $i : 'card\(.*\)'`
1631 mknod card$unit c $chr `unit2minor $unit`
1637 *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
1638 *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
1639 *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
1640 *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
1643 ttyy?) unit=$(($unit + 16));;
1644 ttyz?) unit=$(($unit + 32));;
1650 mknod cronyx c 42 63
1654 mknod joy0 c 51 0 root:operator
1655 mknod joy1 c 51 1 root:operator
1665 unit=`expr $i : 'ctx\(.*\)'`
1666 mknod ctx$unit c 40 `unit2minor $unit`
1671 unit=`expr $i : 'meteor\(.*\)'`
1672 mknod meteor$unit c 67 `unit2minor $unit`
1673 chmod 444 meteor$unit
1677 unit=`expr $i : 'bktr\(.*\)'`
1678 mknod bktr$unit c 92 `unit2minor $unit`
1679 mknod tuner$unit c 92 `unit2minor $((16 + $unit))`
1680 mknod vbi$unit c 92 `unit2minor $((32 + $unit))`
1681 chmod 444 bktr$unit tuner$unit vbi$unit
1685 ntun=`expr $i : 'tun\(.*\)$'`
1687 while [ $unit -le $ntun ]; do
1688 mknod tun$unit c 52 `unit2minor $unit`
1694 ntap=`expr $i : 'tap\(.*\)$'`
1696 while [ $unit -le $ntap ]; do
1697 mknod tap$unit c 149 `unit2minor $unit` root:network
1703 mknod sysmouse c 12 128
1704 mknod consolectl c 12 255
1708 mknod jogdial c 160 0
1712 unit=`expr $i : 'snp\(.*\)'`
1713 mknod snp$unit c 53 `unit2minor $unit`
1716 # dufault@hda.com: If I do much more work on other A-D boards
1717 # then eventually we'll have a "ad" and "dio" interface and some of these
1718 # "labpcaio" ones will be gone.
1719 # labpcaio: D-A and A-D.
1720 # labpcdio: Digital in and Digital out.
1727 unit=`expr $i : 'labpcaio\(.*\)'`
1728 all="0 1 2 3 4 5 6 7"
1733 unit=`expr $i : 'labpcdio\(.*\)'`
1738 die 3 "Don't know LabPC type $i"
1741 if [ -z "${unit}" ]; then
1746 mknod $name$unit c 66 $(($offset + $unit))
1751 mknod $name$i c 66 $(($offset + $i))
1755 echo "No such LabPC unit: $unit"
1762 mknod perfmon c 2 32 root:kmem
1769 mknod ipstate c 79 2
1774 mknod elan-mmcr c 100 0 # XXX local major
1779 unit=`expr $i : 'kbd\(.*\)'`
1781 mknod kbd$unit c $chr `unit2minor $unit`
1793 unit=`expr $i : 'i4brbch\(.*\)'`
1794 mknod i4brbch$unit c 57 `unit2minor $unit`
1799 unit=`expr $i : 'i4bteld\(.*\)'`
1800 mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))`
1804 unit=`expr $i : 'i4btel\(.*\)'`
1805 mknod i4btel$unit c 56 `unit2minor $unit`
1809 unit=`expr $i : 'i4btrc\(.*\)'`
1810 mknod i4btrc$unit c 59 `unit2minor $unit`
1814 unit=`expr $i : 'aac\(.*\)'`
1815 mknod aac$unit c 150 `unit2minor $unit`
1816 ln -fs aac$unit afa$unit
1817 ln -fs aac$unit hpn$unit
1821 unit=`expr $i : 'mlx\(.*\)'`
1822 mknod mlx$unit c 130 `unit2minor $unit`
1826 unit=`expr $i : 'amr\(.*\)'`
1827 mknod amr$unit c 132 `unit2minor $unit`
1831 unit=`expr $i : 'ips\(.*\)'`
1832 mknod mlx$unit c 175 `unit2minor $unit`
1836 unit=`expr $i : 'ciss\(.*\)'`
1837 mknod ciss$unit c 166 `unit2minor $unit`
1841 mknod agpgart c 148 0
1845 unit=`expr $i : 'twe\(.*\)'`
1846 mknod twe$unit c 146 `unit2minor $unit`
1850 unit=`expr $i : 'tw\(.*\)'`
1851 mknod tw$unit c 19 `unit2minor $unit` root:operator
1855 unit=`expr $i : 'cfs\(.*\)'`
1856 mknod cfs$unit c 93 $unit root:operator
1860 unit=`expr $i : 'nsmb\(.*\)'`
1861 mknod nsmb$unit c 144 $unit
1865 umask 0 # XXX should be elsewhere
1871 echo $i - no such device name