2 * Copyright (c) 1997, 1998, 1999
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
32 * $FreeBSD: src/sys/pci/if_dc.c,v 1.9.2.45 2003/06/08 14:31:53 mux Exp $
33 * $DragonFly: src/sys/dev/netif/dc/if_dc.c,v 1.57 2008/08/05 11:23:01 sephe Exp $
37 * DEC "tulip" clone ethernet driver. Supports the DEC/Intel 21143
38 * series chips and several workalikes including the following:
40 * Macronix 98713/98715/98725/98727/98732 PMAC (www.macronix.com)
41 * Macronix/Lite-On 82c115 PNIC II (www.macronix.com)
42 * Lite-On 82c168/82c169 PNIC (www.litecom.com)
43 * ASIX Electronics AX88140A (www.asix.com.tw)
44 * ASIX Electronics AX88141 (www.asix.com.tw)
45 * ADMtek AL981 (www.admtek.com.tw)
46 * ADMtek AN985 (www.admtek.com.tw)
47 * Netgear FA511 (www.netgear.com) Appears to be rebadged ADMTek AN985
48 * Davicom DM9100, DM9102, DM9102A (www.davicom8.com)
49 * Accton EN1217 (www.accton.com)
50 * Xircom X3201 (www.xircom.com)
51 * Conexant LANfinity (www.conexant.com)
53 * Datasheets for the 21143 are available at developer.intel.com.
54 * Datasheets for the clone parts can be found at their respective sites.
55 * (Except for the PNIC; see www.freebsd.org/~wpaul/PNIC/pnic.ps.gz.)
56 * The PNIC II is essentially a Macronix 98715A chip; the only difference
57 * worth noting is that its multicast hash table is only 128 bits wide
60 * Written by Bill Paul <wpaul@ee.columbia.edu>
61 * Electrical Engineering Department
62 * Columbia University, New York City
66 * The Intel 21143 is the successor to the DEC 21140. It is basically
67 * the same as the 21140 but with a few new features. The 21143 supports
68 * three kinds of media attachments:
70 * o MII port, for 10Mbps and 100Mbps support and NWAY
71 * autonegotiation provided by an external PHY.
72 * o SYM port, for symbol mode 100Mbps support.
76 * The 100Mbps SYM port and 10baseT port can be used together in
77 * combination with the internal NWAY support to create a 10/100
78 * autosensing configuration.
80 * Note that not all tulip workalikes are handled in this driver: we only
81 * deal with those which are relatively well behaved. The Winbond is
82 * handled separately due to its different register offsets and the
83 * special handling needed for its various bugs. The PNIC is handled
84 * here, but I'm not thrilled about it.
86 * All of the workalike chips use some form of MII transceiver support
87 * with the exception of the Macronix chips, which also have a SYM port.
88 * The ASIX AX88140A is also documented to have a SYM port, but all
89 * the cards I've seen use an MII transceiver, probably because the
90 * AX88140A doesn't support internal NWAY.
93 #include "opt_polling.h"
95 #include <sys/param.h>
96 #include <sys/systm.h>
97 #include <sys/sockio.h>
99 #include <sys/malloc.h>
100 #include <sys/kernel.h>
101 #include <sys/interrupt.h>
102 #include <sys/socket.h>
103 #include <sys/sysctl.h>
105 #include <sys/rman.h>
106 #include <sys/thread2.h>
109 #include <net/ifq_var.h>
110 #include <net/if_arp.h>
111 #include <net/ethernet.h>
112 #include <net/if_dl.h>
113 #include <net/if_media.h>
114 #include <net/if_types.h>
115 #include <net/vlan/if_vlan_var.h>
119 #include <vm/vm.h> /* for vtophys */
120 #include <vm/pmap.h> /* for vtophys */
122 #include "../mii_layer/mii.h"
123 #include "../mii_layer/miivar.h"
125 #include <bus/pci/pcireg.h>
126 #include <bus/pci/pcivar.h>
128 #define DC_USEIOSPACE
130 #include "if_dcreg.h"
132 /* "controller miibus0" required. See GENERIC if you get errors here. */
133 #include "miibus_if.h"
136 * Various supported device vendors/types and their names.
138 static const struct dc_type dc_devs[] = {
139 { DC_VENDORID_DEC, DC_DEVICEID_21143,
140 "Intel 21143 10/100BaseTX" },
141 { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9009,
142 "Davicom DM9009 10/100BaseTX" },
143 { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9100,
144 "Davicom DM9100 10/100BaseTX" },
145 { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9102,
146 "Davicom DM9102 10/100BaseTX" },
147 { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9102,
148 "Davicom DM9102A 10/100BaseTX" },
149 { DC_VENDORID_ADMTEK, DC_DEVICEID_AL981,
150 "ADMtek AL981 10/100BaseTX" },
151 { DC_VENDORID_ADMTEK, DC_DEVICEID_AN985,
152 "ADMtek AN985 10/100BaseTX" },
153 { DC_VENDORID_ADMTEK, DC_DEVICEID_FA511,
154 "Netgear FA511 10/100BaseTX" },
155 { DC_VENDORID_ADMTEK, DC_DEVICEID_ADM9511,
156 "ADMtek ADM9511 10/100BaseTX" },
157 { DC_VENDORID_ADMTEK, DC_DEVICEID_ADM9513,
158 "ADMtek ADM9513 10/100BaseTX" },
159 { DC_VENDORID_ASIX, DC_DEVICEID_AX88140A,
160 "ASIX AX88140A 10/100BaseTX" },
161 { DC_VENDORID_ASIX, DC_DEVICEID_AX88140A,
162 "ASIX AX88141 10/100BaseTX" },
163 { DC_VENDORID_MX, DC_DEVICEID_98713,
164 "Macronix 98713 10/100BaseTX" },
165 { DC_VENDORID_MX, DC_DEVICEID_98713,
166 "Macronix 98713A 10/100BaseTX" },
167 { DC_VENDORID_CP, DC_DEVICEID_98713_CP,
168 "Compex RL100-TX 10/100BaseTX" },
169 { DC_VENDORID_CP, DC_DEVICEID_98713_CP,
170 "Compex RL100-TX 10/100BaseTX" },
171 { DC_VENDORID_MX, DC_DEVICEID_987x5,
172 "Macronix 98715/98715A 10/100BaseTX" },
173 { DC_VENDORID_MX, DC_DEVICEID_987x5,
174 "Macronix 98715AEC-C 10/100BaseTX" },
175 { DC_VENDORID_MX, DC_DEVICEID_987x5,
176 "Macronix 98725 10/100BaseTX" },
177 { DC_VENDORID_MX, DC_DEVICEID_98727,
178 "Macronix 98727/98732 10/100BaseTX" },
179 { DC_VENDORID_LO, DC_DEVICEID_82C115,
180 "LC82C115 PNIC II 10/100BaseTX" },
181 { DC_VENDORID_LO, DC_DEVICEID_82C168,
182 "82c168 PNIC 10/100BaseTX" },
183 { DC_VENDORID_LO, DC_DEVICEID_82C168,
184 "82c169 PNIC 10/100BaseTX" },
185 { DC_VENDORID_ACCTON, DC_DEVICEID_EN1217,
186 "Accton EN1217 10/100BaseTX" },
187 { DC_VENDORID_ACCTON, DC_DEVICEID_EN2242,
188 "Accton EN2242 MiniPCI 10/100BaseTX" },
189 { DC_VENDORID_XIRCOM, DC_DEVICEID_X3201,
190 "Xircom X3201 10/100BaseTX" },
191 { DC_VENDORID_CONEXANT, DC_DEVICEID_RS7112,
192 "Conexant LANfinity MiniPCI 10/100BaseTX" },
193 { DC_VENDORID_3COM, DC_DEVICEID_3CSOHOB,
194 "3Com OfficeConnect 10/100B" },
198 static int dc_probe (device_t);
199 static int dc_attach (device_t);
200 static int dc_detach (device_t);
201 static int dc_suspend (device_t);
202 static int dc_resume (device_t);
203 static void dc_acpi (device_t);
204 static const struct dc_type *dc_devtype (device_t);
205 static int dc_newbuf (struct dc_softc *, int, struct mbuf *);
206 static int dc_encap (struct dc_softc *, struct mbuf *,
208 static void dc_pnic_rx_bug_war (struct dc_softc *, int);
209 static int dc_rx_resync (struct dc_softc *);
210 static void dc_rxeof (struct dc_softc *);
211 static void dc_txeof (struct dc_softc *);
212 static void dc_tick (void *);
213 static void dc_tx_underrun (struct dc_softc *);
214 static void dc_intr (void *);
215 static void dc_start (struct ifnet *);
216 static int dc_ioctl (struct ifnet *, u_long, caddr_t,
218 #ifdef DEVICE_POLLING
219 static void dc_poll (struct ifnet *ifp, enum poll_cmd cmd,
222 static void dc_init (void *);
223 static void dc_stop (struct dc_softc *);
224 static void dc_watchdog (struct ifnet *);
225 static void dc_shutdown (device_t);
226 static int dc_ifmedia_upd (struct ifnet *);
227 static void dc_ifmedia_sts (struct ifnet *, struct ifmediareq *);
229 static void dc_delay (struct dc_softc *);
230 static void dc_eeprom_idle (struct dc_softc *);
231 static void dc_eeprom_putbyte (struct dc_softc *, int);
232 static void dc_eeprom_getword (struct dc_softc *, int, u_int16_t *);
233 static void dc_eeprom_getword_pnic
234 (struct dc_softc *, int, u_int16_t *);
235 static void dc_eeprom_getword_xircom
236 (struct dc_softc *, int, u_int16_t *);
237 static void dc_eeprom_width (struct dc_softc *);
238 static void dc_read_eeprom (struct dc_softc *, caddr_t, int,
241 static void dc_mii_writebit (struct dc_softc *, int);
242 static int dc_mii_readbit (struct dc_softc *);
243 static void dc_mii_sync (struct dc_softc *);
244 static void dc_mii_send (struct dc_softc *, u_int32_t, int);
245 static int dc_mii_readreg (struct dc_softc *, struct dc_mii_frame *);
246 static int dc_mii_writereg (struct dc_softc *, struct dc_mii_frame *);
247 static int dc_miibus_readreg (device_t, int, int);
248 static int dc_miibus_writereg (device_t, int, int, int);
249 static void dc_miibus_statchg (device_t);
250 static void dc_miibus_mediainit (device_t);
252 static u_int32_t dc_crc_mask (struct dc_softc *);
253 static void dc_setcfg (struct dc_softc *, int);
254 static void dc_setfilt_21143 (struct dc_softc *);
255 static void dc_setfilt_asix (struct dc_softc *);
256 static void dc_setfilt_admtek (struct dc_softc *);
257 static void dc_setfilt_xircom (struct dc_softc *);
259 static void dc_setfilt (struct dc_softc *);
261 static void dc_reset (struct dc_softc *);
262 static int dc_list_rx_init (struct dc_softc *);
263 static int dc_list_tx_init (struct dc_softc *);
265 static void dc_read_srom (struct dc_softc *, int);
266 static void dc_parse_21143_srom (struct dc_softc *);
267 static void dc_decode_leaf_sia (struct dc_softc *,
268 struct dc_eblock_sia *);
269 static void dc_decode_leaf_mii (struct dc_softc *,
270 struct dc_eblock_mii *);
271 static void dc_decode_leaf_sym (struct dc_softc *,
272 struct dc_eblock_sym *);
273 static void dc_apply_fixup (struct dc_softc *, int);
274 static uint32_t dc_mchash_xircom(struct dc_softc *, const uint8_t *);
277 #define DC_RES SYS_RES_IOPORT
278 #define DC_RID DC_PCI_CFBIO
280 #define DC_RES SYS_RES_MEMORY
281 #define DC_RID DC_PCI_CFBMA
284 static device_method_t dc_methods[] = {
285 /* Device interface */
286 DEVMETHOD(device_probe, dc_probe),
287 DEVMETHOD(device_attach, dc_attach),
288 DEVMETHOD(device_detach, dc_detach),
289 DEVMETHOD(device_suspend, dc_suspend),
290 DEVMETHOD(device_resume, dc_resume),
291 DEVMETHOD(device_shutdown, dc_shutdown),
294 DEVMETHOD(bus_print_child, bus_generic_print_child),
295 DEVMETHOD(bus_driver_added, bus_generic_driver_added),
298 DEVMETHOD(miibus_readreg, dc_miibus_readreg),
299 DEVMETHOD(miibus_writereg, dc_miibus_writereg),
300 DEVMETHOD(miibus_statchg, dc_miibus_statchg),
301 DEVMETHOD(miibus_mediainit, dc_miibus_mediainit),
306 static driver_t dc_driver = {
309 sizeof(struct dc_softc)
312 static devclass_t dc_devclass;
315 static int dc_quick=1;
316 SYSCTL_INT(_hw, OID_AUTO, dc_quick, CTLFLAG_RW,
317 &dc_quick,0,"do not mdevget in dc driver");
320 DECLARE_DUMMY_MODULE(if_dc);
321 DRIVER_MODULE(if_dc, cardbus, dc_driver, dc_devclass, 0, 0);
322 DRIVER_MODULE(if_dc, pci, dc_driver, dc_devclass, 0, 0);
323 DRIVER_MODULE(miibus, dc, miibus_driver, miibus_devclass, 0, 0);
325 #define DC_SETBIT(sc, reg, x) \
326 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | (x))
328 #define DC_CLRBIT(sc, reg, x) \
329 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~(x))
331 #define SIO_SET(x) DC_SETBIT(sc, DC_SIO, (x))
332 #define SIO_CLR(x) DC_CLRBIT(sc, DC_SIO, (x))
335 dc_delay(struct dc_softc *sc)
339 for (idx = (300 / 33) + 1; idx > 0; idx--)
340 CSR_READ_4(sc, DC_BUSCTL);
344 dc_eeprom_width(struct dc_softc *sc)
348 /* Force EEPROM to idle state. */
351 /* Enter EEPROM access mode. */
352 CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL);
354 DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ);
356 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
358 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS);
363 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_DATAIN);
365 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_DATAIN);
367 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK);
369 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
373 for (i = 1; i <= 12; i++) {
374 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK);
376 if (!(CSR_READ_4(sc, DC_SIO) & DC_SIO_EE_DATAOUT)) {
377 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
381 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
385 /* Turn off EEPROM access mode. */
393 /* Enter EEPROM access mode. */
394 CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL);
396 DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ);
398 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
400 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS);
403 /* Turn off EEPROM access mode. */
408 dc_eeprom_idle(struct dc_softc *sc)
412 CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL);
414 DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ);
416 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
418 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS);
421 for (i = 0; i < 25; i++) {
422 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
424 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK);
428 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
430 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CS);
432 CSR_WRITE_4(sc, DC_SIO, 0x00000000);
438 * Send a read command and address to the EEPROM, check for ACK.
441 dc_eeprom_putbyte(struct dc_softc *sc, int addr)
445 d = DC_EECMD_READ >> 6;
448 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_DATAIN);
450 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_DATAIN);
452 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK);
454 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
459 * Feed in each bit and strobe the clock.
461 for (i = sc->dc_romwidth; i--;) {
462 if (addr & (1 << i)) {
463 SIO_SET(DC_SIO_EE_DATAIN);
465 SIO_CLR(DC_SIO_EE_DATAIN);
468 SIO_SET(DC_SIO_EE_CLK);
470 SIO_CLR(DC_SIO_EE_CLK);
478 * Read a word of data stored in the EEPROM at address 'addr.'
479 * The PNIC 82c168/82c169 has its own non-standard way to read
483 dc_eeprom_getword_pnic(struct dc_softc *sc, int addr, u_int16_t *dest)
488 CSR_WRITE_4(sc, DC_PN_SIOCTL, DC_PN_EEOPCODE_READ|addr);
490 for (i = 0; i < DC_TIMEOUT; i++) {
492 r = CSR_READ_4(sc, DC_SIO);
493 if (!(r & DC_PN_SIOCTL_BUSY)) {
494 *dest = (u_int16_t)(r & 0xFFFF);
503 * Read a word of data stored in the EEPROM at address 'addr.'
504 * The Xircom X3201 has its own non-standard way to read
508 dc_eeprom_getword_xircom(struct dc_softc *sc, int addr, u_int16_t *dest)
510 SIO_SET(DC_SIO_ROMSEL | DC_SIO_ROMCTL_READ);
513 CSR_WRITE_4(sc, DC_ROM, addr | 0x160);
514 *dest = (u_int16_t)CSR_READ_4(sc, DC_SIO)&0xff;
516 CSR_WRITE_4(sc, DC_ROM, addr | 0x160);
517 *dest |= ((u_int16_t)CSR_READ_4(sc, DC_SIO)&0xff) << 8;
519 SIO_CLR(DC_SIO_ROMSEL | DC_SIO_ROMCTL_READ);
523 * Read a word of data stored in the EEPROM at address 'addr.'
526 dc_eeprom_getword(struct dc_softc *sc, int addr, u_int16_t *dest)
531 /* Force EEPROM to idle state. */
534 /* Enter EEPROM access mode. */
535 CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL);
537 DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ);
539 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
541 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS);
545 * Send address of word we want to read.
547 dc_eeprom_putbyte(sc, addr);
550 * Start reading bits from EEPROM.
552 for (i = 0x8000; i; i >>= 1) {
553 SIO_SET(DC_SIO_EE_CLK);
555 if (CSR_READ_4(sc, DC_SIO) & DC_SIO_EE_DATAOUT)
558 SIO_CLR(DC_SIO_EE_CLK);
562 /* Turn off EEPROM access mode. */
571 * Read a sequence of words from the EEPROM.
574 dc_read_eeprom(struct dc_softc *sc, caddr_t dest, int off, int cnt, int swap)
577 u_int16_t word = 0, *ptr;
579 for (i = 0; i < cnt; i++) {
581 dc_eeprom_getword_pnic(sc, off + i, &word);
582 else if (DC_IS_XIRCOM(sc))
583 dc_eeprom_getword_xircom(sc, off + i, &word);
585 dc_eeprom_getword(sc, off + i, &word);
586 ptr = (u_int16_t *)(dest + (i * 2));
597 * The following two routines are taken from the Macronix 98713
598 * Application Notes pp.19-21.
601 * Write a bit to the MII bus.
604 dc_mii_writebit(struct dc_softc *sc, int bit)
607 CSR_WRITE_4(sc, DC_SIO,
608 DC_SIO_ROMCTL_WRITE|DC_SIO_MII_DATAOUT);
610 CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_WRITE);
612 DC_SETBIT(sc, DC_SIO, DC_SIO_MII_CLK);
613 DC_CLRBIT(sc, DC_SIO, DC_SIO_MII_CLK);
619 * Read a bit from the MII bus.
622 dc_mii_readbit(struct dc_softc *sc)
624 CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_READ|DC_SIO_MII_DIR);
625 CSR_READ_4(sc, DC_SIO);
626 DC_SETBIT(sc, DC_SIO, DC_SIO_MII_CLK);
627 DC_CLRBIT(sc, DC_SIO, DC_SIO_MII_CLK);
628 if (CSR_READ_4(sc, DC_SIO) & DC_SIO_MII_DATAIN)
635 * Sync the PHYs by setting data bit and strobing the clock 32 times.
638 dc_mii_sync(struct dc_softc *sc)
642 CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_WRITE);
644 for (i = 0; i < 32; i++)
645 dc_mii_writebit(sc, 1);
651 * Clock a series of bits through the MII.
654 dc_mii_send(struct dc_softc *sc, u_int32_t bits, int cnt)
658 for (i = (0x1 << (cnt - 1)); i; i >>= 1)
659 dc_mii_writebit(sc, bits & i);
663 * Read an PHY register through the MII.
666 dc_mii_readreg(struct dc_softc *sc, struct dc_mii_frame *frame)
671 * Set up frame for RX.
673 frame->mii_stdelim = DC_MII_STARTDELIM;
674 frame->mii_opcode = DC_MII_READOP;
675 frame->mii_turnaround = 0;
684 * Send command/address info.
686 dc_mii_send(sc, frame->mii_stdelim, 2);
687 dc_mii_send(sc, frame->mii_opcode, 2);
688 dc_mii_send(sc, frame->mii_phyaddr, 5);
689 dc_mii_send(sc, frame->mii_regaddr, 5);
693 dc_mii_writebit(sc, 1);
694 dc_mii_writebit(sc, 0);
698 ack = dc_mii_readbit(sc);
701 * Now try reading data bits. If the ack failed, we still
702 * need to clock through 16 cycles to keep the PHY(s) in sync.
705 for(i = 0; i < 16; i++) {
711 for (i = 0x8000; i; i >>= 1) {
713 if (dc_mii_readbit(sc))
714 frame->mii_data |= i;
720 dc_mii_writebit(sc, 0);
721 dc_mii_writebit(sc, 0);
729 * Write to a PHY register through the MII.
732 dc_mii_writereg(struct dc_softc *sc, struct dc_mii_frame *frame)
735 * Set up frame for TX.
738 frame->mii_stdelim = DC_MII_STARTDELIM;
739 frame->mii_opcode = DC_MII_WRITEOP;
740 frame->mii_turnaround = DC_MII_TURNAROUND;
747 dc_mii_send(sc, frame->mii_stdelim, 2);
748 dc_mii_send(sc, frame->mii_opcode, 2);
749 dc_mii_send(sc, frame->mii_phyaddr, 5);
750 dc_mii_send(sc, frame->mii_regaddr, 5);
751 dc_mii_send(sc, frame->mii_turnaround, 2);
752 dc_mii_send(sc, frame->mii_data, 16);
755 dc_mii_writebit(sc, 0);
756 dc_mii_writebit(sc, 0);
762 dc_miibus_readreg(device_t dev, int phy, int reg)
764 struct dc_mii_frame frame;
766 int i, rval, phy_reg = 0;
768 sc = device_get_softc(dev);
769 bzero((char *)&frame, sizeof(frame));
772 * Note: both the AL981 and AN985 have internal PHYs,
773 * however the AL981 provides direct access to the PHY
774 * registers while the AN985 uses a serial MII interface.
775 * The AN985's MII interface is also buggy in that you
776 * can read from any MII address (0 to 31), but only address 1
777 * behaves normally. To deal with both cases, we pretend
778 * that the PHY is at MII address 1.
780 if (DC_IS_ADMTEK(sc) && phy != DC_ADMTEK_PHYADDR)
784 * Note: the ukphy probes of the RS7112 report a PHY at
785 * MII address 0 (possibly HomePNA?) and 1 (ethernet)
786 * so we only respond to correct one.
788 if (DC_IS_CONEXANT(sc) && phy != DC_CONEXANT_PHYADDR)
791 if (sc->dc_pmode != DC_PMODE_MII) {
792 if (phy == (MII_NPHY - 1)) {
796 * Fake something to make the probe
797 * code think there's a PHY here.
799 return(BMSR_MEDIAMASK);
803 return(DC_VENDORID_LO);
804 return(DC_VENDORID_DEC);
808 return(DC_DEVICEID_82C168);
809 return(DC_DEVICEID_21143);
819 if (DC_IS_PNIC(sc)) {
820 CSR_WRITE_4(sc, DC_PN_MII, DC_PN_MIIOPCODE_READ |
821 (phy << 23) | (reg << 18));
822 for (i = 0; i < DC_TIMEOUT; i++) {
824 rval = CSR_READ_4(sc, DC_PN_MII);
825 if (!(rval & DC_PN_MII_BUSY)) {
827 return(rval == 0xFFFF ? 0 : rval);
833 if (DC_IS_COMET(sc)) {
836 phy_reg = DC_AL_BMCR;
839 phy_reg = DC_AL_BMSR;
842 phy_reg = DC_AL_VENID;
845 phy_reg = DC_AL_DEVID;
848 phy_reg = DC_AL_ANAR;
851 phy_reg = DC_AL_LPAR;
854 phy_reg = DC_AL_ANER;
857 if_printf(&sc->arpcom.ac_if,
858 "phy_read: bad phy register %x\n", reg);
863 rval = CSR_READ_4(sc, phy_reg) & 0x0000FFFF;
870 frame.mii_phyaddr = phy;
871 frame.mii_regaddr = reg;
872 if (sc->dc_type == DC_TYPE_98713) {
873 phy_reg = CSR_READ_4(sc, DC_NETCFG);
874 CSR_WRITE_4(sc, DC_NETCFG, phy_reg & ~DC_NETCFG_PORTSEL);
876 dc_mii_readreg(sc, &frame);
877 if (sc->dc_type == DC_TYPE_98713)
878 CSR_WRITE_4(sc, DC_NETCFG, phy_reg);
880 return(frame.mii_data);
884 dc_miibus_writereg(device_t dev, int phy, int reg, int data)
887 struct dc_mii_frame frame;
890 sc = device_get_softc(dev);
891 bzero((char *)&frame, sizeof(frame));
893 if (DC_IS_ADMTEK(sc) && phy != DC_ADMTEK_PHYADDR)
896 if (DC_IS_CONEXANT(sc) && phy != DC_CONEXANT_PHYADDR)
899 if (DC_IS_PNIC(sc)) {
900 CSR_WRITE_4(sc, DC_PN_MII, DC_PN_MIIOPCODE_WRITE |
901 (phy << 23) | (reg << 10) | data);
902 for (i = 0; i < DC_TIMEOUT; i++) {
903 if (!(CSR_READ_4(sc, DC_PN_MII) & DC_PN_MII_BUSY))
909 if (DC_IS_COMET(sc)) {
912 phy_reg = DC_AL_BMCR;
915 phy_reg = DC_AL_BMSR;
918 phy_reg = DC_AL_VENID;
921 phy_reg = DC_AL_DEVID;
924 phy_reg = DC_AL_ANAR;
927 phy_reg = DC_AL_LPAR;
930 phy_reg = DC_AL_ANER;
933 if_printf(&sc->arpcom.ac_if,
934 "phy_write: bad phy register %x\n", reg);
939 CSR_WRITE_4(sc, phy_reg, data);
943 frame.mii_phyaddr = phy;
944 frame.mii_regaddr = reg;
945 frame.mii_data = data;
947 if (sc->dc_type == DC_TYPE_98713) {
948 phy_reg = CSR_READ_4(sc, DC_NETCFG);
949 CSR_WRITE_4(sc, DC_NETCFG, phy_reg & ~DC_NETCFG_PORTSEL);
951 dc_mii_writereg(sc, &frame);
952 if (sc->dc_type == DC_TYPE_98713)
953 CSR_WRITE_4(sc, DC_NETCFG, phy_reg);
959 dc_miibus_statchg(device_t dev)
962 struct mii_data *mii;
965 sc = device_get_softc(dev);
966 if (DC_IS_ADMTEK(sc))
969 mii = device_get_softc(sc->dc_miibus);
970 ifm = &mii->mii_media;
971 if (DC_IS_DAVICOM(sc) &&
972 IFM_SUBTYPE(ifm->ifm_media) == IFM_HPNA_1) {
973 dc_setcfg(sc, ifm->ifm_media);
974 sc->dc_if_media = ifm->ifm_media;
976 dc_setcfg(sc, mii->mii_media_active);
977 sc->dc_if_media = mii->mii_media_active;
984 * Special support for DM9102A cards with HomePNA PHYs. Note:
985 * with the Davicom DM9102A/DM9801 eval board that I have, it seems
986 * to be impossible to talk to the management interface of the DM9801
987 * PHY (its MDIO pin is not connected to anything). Consequently,
988 * the driver has to just 'know' about the additional mode and deal
989 * with it itself. *sigh*
992 dc_miibus_mediainit(device_t dev)
995 struct mii_data *mii;
999 rev = pci_get_revid(dev);
1001 sc = device_get_softc(dev);
1002 mii = device_get_softc(sc->dc_miibus);
1003 ifm = &mii->mii_media;
1005 if (DC_IS_DAVICOM(sc) && rev >= DC_REVISION_DM9102A)
1006 ifmedia_add(ifm, IFM_ETHER | IFM_HPNA_1, 0, NULL);
1011 #define DC_BITS_512 9
1012 #define DC_BITS_128 7
1013 #define DC_BITS_64 6
1016 dc_crc_mask(struct dc_softc *sc)
1019 * The hash table on the PNIC II and the MX98715AEC-C/D/E
1020 * chips is only 128 bits wide.
1022 if (sc->dc_flags & DC_128BIT_HASH)
1023 return ((1 << DC_BITS_128) - 1);
1025 /* The hash table on the MX98715BEC is only 64 bits wide. */
1026 if (sc->dc_flags & DC_64BIT_HASH)
1027 return ((1 << DC_BITS_64) - 1);
1029 return ((1 << DC_BITS_512) - 1);
1033 * 21143-style RX filter setup routine. Filter programming is done by
1034 * downloading a special setup frame into the TX engine. 21143, Macronix,
1035 * PNIC, PNIC II and Davicom chips are programmed this way.
1037 * We always program the chip using 'hash perfect' mode, i.e. one perfect
1038 * address (our node address) and a 512-bit hash filter for multicast
1039 * frames. We also sneak the broadcast address into the hash filter since
1043 dc_setfilt_21143(struct dc_softc *sc)
1045 struct dc_desc *sframe;
1046 u_int32_t h, crc_mask, *sp;
1047 struct ifmultiaddr *ifma;
1051 ifp = &sc->arpcom.ac_if;
1053 i = sc->dc_cdata.dc_tx_prod;
1054 DC_INC(sc->dc_cdata.dc_tx_prod, DC_TX_LIST_CNT);
1055 sc->dc_cdata.dc_tx_cnt++;
1056 sframe = &sc->dc_ldata->dc_tx_list[i];
1057 sp = (u_int32_t *)&sc->dc_cdata.dc_sbuf;
1058 bzero((char *)sp, DC_SFRAME_LEN);
1060 sframe->dc_data = vtophys(&sc->dc_cdata.dc_sbuf);
1061 sframe->dc_ctl = DC_SFRAME_LEN | DC_TXCTL_SETUP | DC_TXCTL_TLINK |
1062 DC_FILTER_HASHPERF | DC_TXCTL_FINT;
1064 sc->dc_cdata.dc_tx_chain[i] = (struct mbuf *)&sc->dc_cdata.dc_sbuf;
1066 /* If we want promiscuous mode, set the allframes bit. */
1067 if (ifp->if_flags & IFF_PROMISC)
1068 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1070 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1072 if (ifp->if_flags & IFF_ALLMULTI)
1073 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1075 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1077 crc_mask = dc_crc_mask(sc);
1078 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1079 if (ifma->ifma_addr->sa_family != AF_LINK)
1082 LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
1083 ETHER_ADDR_LEN) & crc_mask;
1084 sp[h >> 4] |= 1 << (h & 0xF);
1087 if (ifp->if_flags & IFF_BROADCAST) {
1088 h = ether_crc32_le(ifp->if_broadcastaddr,
1089 ETHER_ADDR_LEN) & crc_mask;
1090 sp[h >> 4] |= 1 << (h & 0xF);
1093 /* Set our MAC address */
1094 sp[39] = ((u_int16_t *)sc->arpcom.ac_enaddr)[0];
1095 sp[40] = ((u_int16_t *)sc->arpcom.ac_enaddr)[1];
1096 sp[41] = ((u_int16_t *)sc->arpcom.ac_enaddr)[2];
1098 sframe->dc_status = DC_TXSTAT_OWN;
1099 CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF);
1102 * The PNIC takes an exceedingly long time to process its
1103 * setup frame; wait 10ms after posting the setup frame
1104 * before proceeding, just so it has time to swallow its
1115 dc_setfilt_admtek(struct dc_softc *sc)
1120 u_int32_t hashes[2] = { 0, 0 };
1121 struct ifmultiaddr *ifma;
1123 ifp = &sc->arpcom.ac_if;
1125 /* Init our MAC address */
1126 CSR_WRITE_4(sc, DC_AL_PAR0, *(u_int32_t *)(&sc->arpcom.ac_enaddr[0]));
1127 CSR_WRITE_4(sc, DC_AL_PAR1, *(u_int32_t *)(&sc->arpcom.ac_enaddr[4]));
1129 /* If we want promiscuous mode, set the allframes bit. */
1130 if (ifp->if_flags & IFF_PROMISC)
1131 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1133 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1135 if (ifp->if_flags & IFF_ALLMULTI)
1136 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1138 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1140 /* first, zot all the existing hash bits */
1141 CSR_WRITE_4(sc, DC_AL_MAR0, 0);
1142 CSR_WRITE_4(sc, DC_AL_MAR1, 0);
1145 * If we're already in promisc or allmulti mode, we
1146 * don't have to bother programming the multicast filter.
1148 if (ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI))
1151 /* now program new ones */
1152 if (DC_IS_CENTAUR(sc))
1153 crc_mask = dc_crc_mask(sc);
1156 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1157 if (ifma->ifma_addr->sa_family != AF_LINK)
1159 if (DC_IS_CENTAUR(sc)) {
1161 LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
1162 ETHER_ADDR_LEN) & crc_mask;
1165 LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
1167 h = (h >> 26) & crc_mask;
1170 hashes[0] |= (1 << h);
1172 hashes[1] |= (1 << (h - 32));
1175 CSR_WRITE_4(sc, DC_AL_MAR0, hashes[0]);
1176 CSR_WRITE_4(sc, DC_AL_MAR1, hashes[1]);
1182 dc_setfilt_asix(struct dc_softc *sc)
1186 u_int32_t hashes[2] = { 0, 0 };
1187 struct ifmultiaddr *ifma;
1189 ifp = &sc->arpcom.ac_if;
1191 /* Init our MAC address */
1192 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_PAR0);
1193 CSR_WRITE_4(sc, DC_AX_FILTDATA,
1194 *(u_int32_t *)(&sc->arpcom.ac_enaddr[0]));
1195 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_PAR1);
1196 CSR_WRITE_4(sc, DC_AX_FILTDATA,
1197 *(u_int32_t *)(&sc->arpcom.ac_enaddr[4]));
1199 /* If we want promiscuous mode, set the allframes bit. */
1200 if (ifp->if_flags & IFF_PROMISC)
1201 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1203 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1205 if (ifp->if_flags & IFF_ALLMULTI)
1206 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1208 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1211 * The ASIX chip has a special bit to enable reception
1212 * of broadcast frames.
1214 if (ifp->if_flags & IFF_BROADCAST)
1215 DC_SETBIT(sc, DC_NETCFG, DC_AX_NETCFG_RX_BROAD);
1217 DC_CLRBIT(sc, DC_NETCFG, DC_AX_NETCFG_RX_BROAD);
1219 /* first, zot all the existing hash bits */
1220 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR0);
1221 CSR_WRITE_4(sc, DC_AX_FILTDATA, 0);
1222 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR1);
1223 CSR_WRITE_4(sc, DC_AX_FILTDATA, 0);
1226 * If we're already in promisc or allmulti mode, we
1227 * don't have to bother programming the multicast filter.
1229 if (ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI))
1232 /* now program new ones */
1233 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1234 if (ifma->ifma_addr->sa_family != AF_LINK)
1237 LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
1239 h = (h >> 26) & 0x3f;
1241 hashes[0] |= (1 << h);
1243 hashes[1] |= (1 << (h - 32));
1246 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR0);
1247 CSR_WRITE_4(sc, DC_AX_FILTDATA, hashes[0]);
1248 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR1);
1249 CSR_WRITE_4(sc, DC_AX_FILTDATA, hashes[1]);
1255 dc_setfilt_xircom(struct dc_softc *sc)
1257 struct dc_desc *sframe;
1259 struct ifmultiaddr *ifma;
1263 ifp = &sc->arpcom.ac_if;
1264 KASSERT(ifp->if_flags & IFF_RUNNING,
1265 ("%s is not running yet\n", ifp->if_xname));
1267 DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_TX_ON|DC_NETCFG_RX_ON));
1269 i = sc->dc_cdata.dc_tx_prod;
1270 DC_INC(sc->dc_cdata.dc_tx_prod, DC_TX_LIST_CNT);
1271 sc->dc_cdata.dc_tx_cnt++;
1272 sframe = &sc->dc_ldata->dc_tx_list[i];
1273 sp = (u_int32_t *)&sc->dc_cdata.dc_sbuf;
1274 bzero(sp, DC_SFRAME_LEN);
1276 sframe->dc_data = vtophys(&sc->dc_cdata.dc_sbuf);
1277 sframe->dc_ctl = DC_SFRAME_LEN | DC_TXCTL_SETUP | DC_TXCTL_TLINK |
1278 DC_FILTER_HASHPERF | DC_TXCTL_FINT;
1280 sc->dc_cdata.dc_tx_chain[i] = (struct mbuf *)&sc->dc_cdata.dc_sbuf;
1282 /* If we want promiscuous mode, set the allframes bit. */
1283 if (ifp->if_flags & IFF_PROMISC)
1284 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1286 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1288 if (ifp->if_flags & IFF_ALLMULTI)
1289 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1291 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1293 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1294 if (ifma->ifma_addr->sa_family != AF_LINK)
1296 h = dc_mchash_xircom(sc,
1297 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
1298 sp[h >> 4] |= 1 << (h & 0xF);
1301 if (ifp->if_flags & IFF_BROADCAST) {
1302 h = dc_mchash_xircom(sc, (caddr_t)ðerbroadcastaddr);
1303 sp[h >> 4] |= 1 << (h & 0xF);
1306 /* Set our MAC address */
1307 sp[0] = ((u_int16_t *)sc->arpcom.ac_enaddr)[0];
1308 sp[1] = ((u_int16_t *)sc->arpcom.ac_enaddr)[1];
1309 sp[2] = ((u_int16_t *)sc->arpcom.ac_enaddr)[2];
1311 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON);
1312 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ON);
1313 sframe->dc_status = DC_TXSTAT_OWN;
1314 CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF);
1325 dc_setfilt(struct dc_softc *sc)
1327 if (DC_IS_INTEL(sc) || DC_IS_MACRONIX(sc) || DC_IS_PNIC(sc) ||
1328 DC_IS_PNICII(sc) || DC_IS_DAVICOM(sc) || DC_IS_CONEXANT(sc))
1329 dc_setfilt_21143(sc);
1332 dc_setfilt_asix(sc);
1334 if (DC_IS_ADMTEK(sc))
1335 dc_setfilt_admtek(sc);
1337 if (DC_IS_XIRCOM(sc))
1338 dc_setfilt_xircom(sc);
1342 * In order to fiddle with the
1343 * 'full-duplex' and '100Mbps' bits in the netconfig register, we
1344 * first have to put the transmit and/or receive logic in the idle state.
1347 dc_setcfg(struct dc_softc *sc, int media)
1352 if (IFM_SUBTYPE(media) == IFM_NONE)
1355 if (CSR_READ_4(sc, DC_NETCFG) & (DC_NETCFG_TX_ON|DC_NETCFG_RX_ON)) {
1357 DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_TX_ON|DC_NETCFG_RX_ON));
1359 for (i = 0; i < DC_TIMEOUT; i++) {
1360 isr = CSR_READ_4(sc, DC_ISR);
1361 if ((isr & DC_ISR_TX_IDLE) &&
1362 ((isr & DC_ISR_RX_STATE) == DC_RXSTATE_STOPPED ||
1363 (isr & DC_ISR_RX_STATE) == DC_RXSTATE_WAIT))
1368 if (i == DC_TIMEOUT) {
1369 if_printf(&sc->arpcom.ac_if,
1370 "failed to force tx and rx to idle state\n");
1374 if (IFM_SUBTYPE(media) == IFM_100_TX) {
1375 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_SPEEDSEL);
1376 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_HEARTBEAT);
1377 if (sc->dc_pmode == DC_PMODE_MII) {
1380 if (DC_IS_INTEL(sc)) {
1381 /* there's a write enable bit here that reads as 1 */
1382 watchdogreg = CSR_READ_4(sc, DC_WATCHDOG);
1383 watchdogreg &= ~DC_WDOG_CTLWREN;
1384 watchdogreg |= DC_WDOG_JABBERDIS;
1385 CSR_WRITE_4(sc, DC_WATCHDOG, watchdogreg);
1387 DC_SETBIT(sc, DC_WATCHDOG, DC_WDOG_JABBERDIS);
1389 DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_PCS|
1390 DC_NETCFG_PORTSEL|DC_NETCFG_SCRAMBLER));
1391 if (sc->dc_type == DC_TYPE_98713)
1392 DC_SETBIT(sc, DC_NETCFG, (DC_NETCFG_PCS|
1393 DC_NETCFG_SCRAMBLER));
1394 if (!DC_IS_DAVICOM(sc))
1395 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1396 DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF);
1397 if (DC_IS_INTEL(sc))
1398 dc_apply_fixup(sc, IFM_AUTO);
1400 if (DC_IS_PNIC(sc)) {
1401 DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_SPEEDSEL);
1402 DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_100TX_LOOP);
1403 DC_SETBIT(sc, DC_PN_NWAY, DC_PN_NWAY_SPEEDSEL);
1405 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1406 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PCS);
1407 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_SCRAMBLER);
1408 if (DC_IS_INTEL(sc))
1410 (media & IFM_GMASK) == IFM_FDX ?
1411 IFM_100_TX|IFM_FDX : IFM_100_TX);
1415 if (IFM_SUBTYPE(media) == IFM_10_T) {
1416 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_SPEEDSEL);
1417 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_HEARTBEAT);
1418 if (sc->dc_pmode == DC_PMODE_MII) {
1421 /* there's a write enable bit here that reads as 1 */
1422 if (DC_IS_INTEL(sc)) {
1423 watchdogreg = CSR_READ_4(sc, DC_WATCHDOG);
1424 watchdogreg &= ~DC_WDOG_CTLWREN;
1425 watchdogreg |= DC_WDOG_JABBERDIS;
1426 CSR_WRITE_4(sc, DC_WATCHDOG, watchdogreg);
1428 DC_SETBIT(sc, DC_WATCHDOG, DC_WDOG_JABBERDIS);
1430 DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_PCS|
1431 DC_NETCFG_PORTSEL|DC_NETCFG_SCRAMBLER));
1432 if (sc->dc_type == DC_TYPE_98713)
1433 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PCS);
1434 if (!DC_IS_DAVICOM(sc))
1435 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1436 DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF);
1437 if (DC_IS_INTEL(sc))
1438 dc_apply_fixup(sc, IFM_AUTO);
1440 if (DC_IS_PNIC(sc)) {
1441 DC_PN_GPIO_CLRBIT(sc, DC_PN_GPIO_SPEEDSEL);
1442 DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_100TX_LOOP);
1443 DC_CLRBIT(sc, DC_PN_NWAY, DC_PN_NWAY_SPEEDSEL);
1445 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1446 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PCS);
1447 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_SCRAMBLER);
1448 if (DC_IS_INTEL(sc)) {
1449 DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
1450 DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF);
1451 if ((media & IFM_GMASK) == IFM_FDX)
1452 DC_SETBIT(sc, DC_10BTCTRL, 0x7F3D);
1454 DC_SETBIT(sc, DC_10BTCTRL, 0x7F3F);
1455 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
1456 DC_CLRBIT(sc, DC_10BTCTRL,
1457 DC_TCTL_AUTONEGENBL);
1459 (media & IFM_GMASK) == IFM_FDX ?
1460 IFM_10_T|IFM_FDX : IFM_10_T);
1467 * If this is a Davicom DM9102A card with a DM9801 HomePNA
1468 * PHY and we want HomePNA mode, set the portsel bit to turn
1469 * on the external MII port.
1471 if (DC_IS_DAVICOM(sc)) {
1472 if (IFM_SUBTYPE(media) == IFM_HPNA_1) {
1473 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1476 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1480 if ((media & IFM_GMASK) == IFM_FDX) {
1481 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX);
1482 if (sc->dc_pmode == DC_PMODE_SYM && DC_IS_PNIC(sc))
1483 DC_SETBIT(sc, DC_PN_NWAY, DC_PN_NWAY_DUPLEX);
1485 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX);
1486 if (sc->dc_pmode == DC_PMODE_SYM && DC_IS_PNIC(sc))
1487 DC_CLRBIT(sc, DC_PN_NWAY, DC_PN_NWAY_DUPLEX);
1491 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON|DC_NETCFG_RX_ON);
1497 dc_reset(struct dc_softc *sc)
1501 DC_SETBIT(sc, DC_BUSCTL, DC_BUSCTL_RESET);
1503 for (i = 0; i < DC_TIMEOUT; i++) {
1505 if (!(CSR_READ_4(sc, DC_BUSCTL) & DC_BUSCTL_RESET))
1509 if (DC_IS_ASIX(sc) || DC_IS_ADMTEK(sc) || DC_IS_XIRCOM(sc) ||
1510 DC_IS_CONEXANT(sc)) {
1512 DC_CLRBIT(sc, DC_BUSCTL, DC_BUSCTL_RESET);
1516 if (i == DC_TIMEOUT)
1517 if_printf(&sc->arpcom.ac_if, "reset never completed!\n");
1519 /* Wait a little while for the chip to get its brains in order. */
1522 CSR_WRITE_4(sc, DC_IMR, 0x00000000);
1523 CSR_WRITE_4(sc, DC_BUSCTL, 0x00000000);
1524 CSR_WRITE_4(sc, DC_NETCFG, 0x00000000);
1527 * Bring the SIA out of reset. In some cases, it looks
1528 * like failing to unreset the SIA soon enough gets it
1529 * into a state where it will never come out of reset
1530 * until we reset the whole chip again.
1532 if (DC_IS_INTEL(sc)) {
1533 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
1534 CSR_WRITE_4(sc, DC_10BTCTRL, 0);
1535 CSR_WRITE_4(sc, DC_WATCHDOG, 0);
1541 static const struct dc_type *
1542 dc_devtype(device_t dev)
1544 const struct dc_type *t;
1549 while(t->dc_name != NULL) {
1550 if ((pci_get_vendor(dev) == t->dc_vid) &&
1551 (pci_get_device(dev) == t->dc_did)) {
1552 /* Check the PCI revision */
1553 rev = pci_get_revid(dev);
1554 if (t->dc_did == DC_DEVICEID_98713 &&
1555 rev >= DC_REVISION_98713A)
1557 if (t->dc_did == DC_DEVICEID_98713_CP &&
1558 rev >= DC_REVISION_98713A)
1560 if (t->dc_did == DC_DEVICEID_987x5 &&
1561 rev >= DC_REVISION_98715AEC_C)
1563 if (t->dc_did == DC_DEVICEID_987x5 &&
1564 rev >= DC_REVISION_98725)
1566 if (t->dc_did == DC_DEVICEID_AX88140A &&
1567 rev >= DC_REVISION_88141)
1569 if (t->dc_did == DC_DEVICEID_82C168 &&
1570 rev >= DC_REVISION_82C169)
1572 if (t->dc_did == DC_DEVICEID_DM9102 &&
1573 rev >= DC_REVISION_DM9102A)
1584 * Probe for a 21143 or clone chip. Check the PCI vendor and device
1585 * IDs against our list and return a device name if we find a match.
1586 * We do a little bit of extra work to identify the exact type of
1587 * chip. The MX98713 and MX98713A have the same PCI vendor/device ID,
1588 * but different revision IDs. The same is true for 98715/98715A
1589 * chips and the 98725, as well as the ASIX and ADMtek chips. In some
1590 * cases, the exact chip revision affects driver behavior.
1593 dc_probe(device_t dev)
1595 const struct dc_type *t;
1597 t = dc_devtype(dev);
1599 struct dc_softc *sc = device_get_softc(dev);
1601 /* Need this info to decide on a chip type. */
1603 device_set_desc(dev, t->dc_name);
1611 dc_acpi(device_t dev)
1613 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
1614 uint32_t iobase, membase, irq;
1615 struct dc_softc *sc;
1617 /* Save important PCI config data. */
1618 iobase = pci_read_config(dev, DC_PCI_CFBIO, 4);
1619 membase = pci_read_config(dev, DC_PCI_CFBMA, 4);
1620 irq = pci_read_config(dev, DC_PCI_CFIT, 4);
1622 sc = device_get_softc(dev);
1623 /* Reset the power state. */
1624 if_printf(&sc->arpcom.ac_if,
1625 "chip is in D%d power mode "
1626 "-- setting to D0\n", pci_get_powerstate(dev));
1627 pci_set_powerstate(dev, PCI_POWERSTATE_D0);
1629 /* Restore PCI config data. */
1630 pci_write_config(dev, DC_PCI_CFBIO, iobase, 4);
1631 pci_write_config(dev, DC_PCI_CFBMA, membase, 4);
1632 pci_write_config(dev, DC_PCI_CFIT, irq, 4);
1637 dc_apply_fixup(struct dc_softc *sc, int media)
1639 struct dc_mediainfo *m;
1647 if (m->dc_media == media)
1655 for (i = 0, p = m->dc_reset_ptr; i < m->dc_reset_len; i++, p += 2) {
1656 reg = (p[0] | (p[1] << 8)) << 16;
1657 CSR_WRITE_4(sc, DC_WATCHDOG, reg);
1660 for (i = 0, p = m->dc_gp_ptr; i < m->dc_gp_len; i++, p += 2) {
1661 reg = (p[0] | (p[1] << 8)) << 16;
1662 CSR_WRITE_4(sc, DC_WATCHDOG, reg);
1669 dc_decode_leaf_sia(struct dc_softc *sc, struct dc_eblock_sia *l)
1671 struct dc_mediainfo *m;
1673 m = kmalloc(sizeof(struct dc_mediainfo), M_DEVBUF, M_INTWAIT | M_ZERO);
1674 switch (l->dc_sia_code & ~DC_SIA_CODE_EXT){
1675 case DC_SIA_CODE_10BT:
1676 m->dc_media = IFM_10_T;
1679 case DC_SIA_CODE_10BT_FDX:
1680 m->dc_media = IFM_10_T|IFM_FDX;
1683 case DC_SIA_CODE_10B2:
1684 m->dc_media = IFM_10_2;
1687 case DC_SIA_CODE_10B5:
1688 m->dc_media = IFM_10_5;
1691 if (l->dc_sia_code & DC_SIA_CODE_EXT){
1694 (u_int8_t *)&l->dc_un.dc_sia_ext.dc_sia_gpio_ctl;
1698 (u_int8_t *)&l->dc_un.dc_sia_noext.dc_sia_gpio_ctl;
1701 m->dc_next = sc->dc_mi;
1704 sc->dc_pmode = DC_PMODE_SIA;
1710 dc_decode_leaf_sym(struct dc_softc *sc, struct dc_eblock_sym *l)
1712 struct dc_mediainfo *m;
1714 m = kmalloc(sizeof(struct dc_mediainfo), M_DEVBUF, M_INTWAIT | M_ZERO);
1715 if (l->dc_sym_code == DC_SYM_CODE_100BT)
1716 m->dc_media = IFM_100_TX;
1718 if (l->dc_sym_code == DC_SYM_CODE_100BT_FDX)
1719 m->dc_media = IFM_100_TX|IFM_FDX;
1722 m->dc_gp_ptr = (u_int8_t *)&l->dc_sym_gpio_ctl;
1724 m->dc_next = sc->dc_mi;
1727 sc->dc_pmode = DC_PMODE_SYM;
1733 dc_decode_leaf_mii(struct dc_softc *sc, struct dc_eblock_mii *l)
1736 struct dc_mediainfo *m;
1738 m = kmalloc(sizeof(struct dc_mediainfo), M_DEVBUF, M_INTWAIT | M_ZERO);
1739 /* We abuse IFM_AUTO to represent MII. */
1740 m->dc_media = IFM_AUTO;
1741 m->dc_gp_len = l->dc_gpr_len;
1744 p += sizeof(struct dc_eblock_mii);
1746 p += 2 * l->dc_gpr_len;
1747 m->dc_reset_len = *p;
1749 m->dc_reset_ptr = p;
1751 m->dc_next = sc->dc_mi;
1758 dc_read_srom(struct dc_softc *sc, int bits)
1763 sc->dc_srom = kmalloc(size, M_DEVBUF, M_INTWAIT);
1764 dc_read_eeprom(sc, (caddr_t)sc->dc_srom, 0, (size / 2), 0);
1768 dc_parse_21143_srom(struct dc_softc *sc)
1770 struct dc_leaf_hdr *lhdr;
1771 struct dc_eblock_hdr *hdr;
1777 loff = sc->dc_srom[27];
1778 lhdr = (struct dc_leaf_hdr *)&(sc->dc_srom[loff]);
1781 ptr += sizeof(struct dc_leaf_hdr) - 1;
1783 * Look if we got a MII media block.
1785 for (i = 0; i < lhdr->dc_mcnt; i++) {
1786 hdr = (struct dc_eblock_hdr *)ptr;
1787 if (hdr->dc_type == DC_EBLOCK_MII)
1790 ptr += (hdr->dc_len & 0x7F);
1795 * Do the same thing again. Only use SIA and SYM media
1796 * blocks if no MII media block is available.
1799 ptr += sizeof(struct dc_leaf_hdr) - 1;
1800 for (i = 0; i < lhdr->dc_mcnt; i++) {
1801 hdr = (struct dc_eblock_hdr *)ptr;
1802 switch(hdr->dc_type) {
1804 dc_decode_leaf_mii(sc, (struct dc_eblock_mii *)hdr);
1808 dc_decode_leaf_sia(sc,
1809 (struct dc_eblock_sia *)hdr);
1813 dc_decode_leaf_sym(sc,
1814 (struct dc_eblock_sym *)hdr);
1817 /* Don't care. Yet. */
1820 ptr += (hdr->dc_len & 0x7F);
1828 * Attach the interface. Allocate softc structures, do ifmedia
1829 * setup and ethernet/BPF attach.
1832 dc_attach(device_t dev)
1835 u_char eaddr[ETHER_ADDR_LEN];
1837 struct dc_softc *sc;
1840 int error = 0, rid, mac_offset;
1843 sc = device_get_softc(dev);
1844 callout_init(&sc->dc_stat_timer);
1846 ifp = &sc->arpcom.ac_if;
1847 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
1850 * Handle power management nonsense.
1855 * Map control/status registers.
1857 pci_enable_busmaster(dev);
1860 sc->dc_res = bus_alloc_resource_any(dev, DC_RES, &rid, RF_ACTIVE);
1862 if (sc->dc_res == NULL) {
1863 device_printf(dev, "couldn't map ports/memory\n");
1868 sc->dc_btag = rman_get_bustag(sc->dc_res);
1869 sc->dc_bhandle = rman_get_bushandle(sc->dc_res);
1871 /* Allocate interrupt */
1873 sc->dc_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
1874 RF_SHAREABLE | RF_ACTIVE);
1876 if (sc->dc_irq == NULL) {
1877 device_printf(dev, "couldn't map interrupt\n");
1882 revision = pci_get_revid(dev);
1884 /* Get the eeprom width, but PNIC and XIRCOM have diff eeprom */
1885 if (sc->dc_info->dc_did != DC_DEVICEID_82C168 &&
1886 sc->dc_info->dc_did != DC_DEVICEID_X3201)
1887 dc_eeprom_width(sc);
1889 switch(sc->dc_info->dc_did) {
1890 case DC_DEVICEID_21143:
1891 sc->dc_type = DC_TYPE_21143;
1892 sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
1893 sc->dc_flags |= DC_REDUCED_MII_POLL;
1894 /* Save EEPROM contents so we can parse them later. */
1895 dc_read_srom(sc, sc->dc_romwidth);
1897 case DC_DEVICEID_DM9009:
1898 case DC_DEVICEID_DM9100:
1899 case DC_DEVICEID_DM9102:
1900 sc->dc_type = DC_TYPE_DM9102;
1901 sc->dc_flags |= DC_TX_COALESCE|DC_TX_INTR_ALWAYS;
1902 sc->dc_flags |= DC_REDUCED_MII_POLL|DC_TX_STORENFWD;
1903 sc->dc_flags |= DC_TX_ALIGN;
1904 sc->dc_pmode = DC_PMODE_MII;
1905 /* Increase the latency timer value. */
1906 command = pci_read_config(dev, DC_PCI_CFLT, 4);
1907 command &= 0xFFFF00FF;
1908 command |= 0x00008000;
1909 pci_write_config(dev, DC_PCI_CFLT, command, 4);
1911 case DC_DEVICEID_AL981:
1912 sc->dc_type = DC_TYPE_AL981;
1913 sc->dc_flags |= DC_TX_USE_TX_INTR;
1914 sc->dc_flags |= DC_TX_ADMTEK_WAR;
1915 sc->dc_pmode = DC_PMODE_MII;
1916 dc_read_srom(sc, sc->dc_romwidth);
1918 case DC_DEVICEID_AN985:
1919 case DC_DEVICEID_ADM9511:
1920 case DC_DEVICEID_ADM9513:
1921 case DC_DEVICEID_FA511:
1922 case DC_DEVICEID_EN2242:
1923 case DC_DEVICEID_3CSOHOB:
1924 sc->dc_type = DC_TYPE_AN985;
1925 sc->dc_flags |= DC_64BIT_HASH;
1926 sc->dc_flags |= DC_TX_USE_TX_INTR;
1927 sc->dc_flags |= DC_TX_ADMTEK_WAR;
1928 sc->dc_pmode = DC_PMODE_MII;
1930 case DC_DEVICEID_98713:
1931 case DC_DEVICEID_98713_CP:
1932 if (revision < DC_REVISION_98713A) {
1933 sc->dc_type = DC_TYPE_98713;
1935 if (revision >= DC_REVISION_98713A) {
1936 sc->dc_type = DC_TYPE_98713A;
1937 sc->dc_flags |= DC_21143_NWAY;
1939 sc->dc_flags |= DC_REDUCED_MII_POLL;
1940 sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
1942 case DC_DEVICEID_987x5:
1943 case DC_DEVICEID_EN1217:
1945 * Macronix MX98715AEC-C/D/E parts have only a
1946 * 128-bit hash table. We need to deal with these
1947 * in the same manner as the PNIC II so that we
1948 * get the right number of bits out of the
1951 if (revision >= DC_REVISION_98715AEC_C &&
1952 revision < DC_REVISION_98725)
1953 sc->dc_flags |= DC_128BIT_HASH;
1954 sc->dc_type = DC_TYPE_987x5;
1955 sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
1956 sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY;
1958 case DC_DEVICEID_98727:
1959 sc->dc_type = DC_TYPE_987x5;
1960 sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
1961 sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY;
1963 case DC_DEVICEID_82C115:
1964 sc->dc_type = DC_TYPE_PNICII;
1965 sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR|DC_128BIT_HASH;
1966 sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY;
1968 case DC_DEVICEID_82C168:
1969 sc->dc_type = DC_TYPE_PNIC;
1970 sc->dc_flags |= DC_TX_STORENFWD|DC_TX_INTR_ALWAYS;
1971 sc->dc_flags |= DC_PNIC_RX_BUG_WAR;
1972 sc->dc_pnic_rx_buf = kmalloc(DC_RXLEN * 5, M_DEVBUF, M_WAITOK);
1973 if (revision < DC_REVISION_82C169)
1974 sc->dc_pmode = DC_PMODE_SYM;
1976 case DC_DEVICEID_AX88140A:
1977 sc->dc_type = DC_TYPE_ASIX;
1978 sc->dc_flags |= DC_TX_USE_TX_INTR|DC_TX_INTR_FIRSTFRAG;
1979 sc->dc_flags |= DC_REDUCED_MII_POLL;
1980 sc->dc_pmode = DC_PMODE_MII;
1982 case DC_DEVICEID_RS7112:
1983 sc->dc_type = DC_TYPE_CONEXANT;
1984 sc->dc_flags |= DC_TX_INTR_ALWAYS;
1985 sc->dc_flags |= DC_REDUCED_MII_POLL;
1986 sc->dc_pmode = DC_PMODE_MII;
1987 dc_read_srom(sc, sc->dc_romwidth);
1989 case DC_DEVICEID_X3201:
1990 sc->dc_type = DC_TYPE_XIRCOM;
1991 sc->dc_flags |= (DC_TX_INTR_ALWAYS | DC_TX_COALESCE |
1994 * We don't actually need to coalesce, but we're doing
1995 * it to obtain a double word aligned buffer.
1996 * The DC_TX_COALESCE flag is required.
1998 sc->dc_pmode = DC_PMODE_MII;
2001 device_printf(dev, "unknown device: %x\n", sc->dc_info->dc_did);
2005 /* Save the cache line size. */
2006 if (DC_IS_DAVICOM(sc))
2007 sc->dc_cachesize = 0;
2009 sc->dc_cachesize = pci_read_config(dev,
2010 DC_PCI_CFLT, 4) & 0xFF;
2012 /* Reset the adapter. */
2015 /* Take 21143 out of snooze mode */
2016 if (DC_IS_INTEL(sc) || DC_IS_XIRCOM(sc)) {
2017 command = pci_read_config(dev, DC_PCI_CFDD, 4);
2018 command &= ~(DC_CFDD_SNOOZE_MODE|DC_CFDD_SLEEP_MODE);
2019 pci_write_config(dev, DC_PCI_CFDD, command, 4);
2023 * Try to learn something about the supported media.
2024 * We know that ASIX and ADMtek and Davicom devices
2025 * will *always* be using MII media, so that's a no-brainer.
2026 * The tricky ones are the Macronix/PNIC II and the
2029 if (DC_IS_INTEL(sc))
2030 dc_parse_21143_srom(sc);
2031 else if (DC_IS_MACRONIX(sc) || DC_IS_PNICII(sc)) {
2032 if (sc->dc_type == DC_TYPE_98713)
2033 sc->dc_pmode = DC_PMODE_MII;
2035 sc->dc_pmode = DC_PMODE_SYM;
2036 } else if (!sc->dc_pmode)
2037 sc->dc_pmode = DC_PMODE_MII;
2040 * Get station address from the EEPROM.
2042 switch(sc->dc_type) {
2044 case DC_TYPE_98713A:
2046 case DC_TYPE_PNICII:
2047 dc_read_eeprom(sc, (caddr_t)&mac_offset,
2048 (DC_EE_NODEADDR_OFFSET / 2), 1, 0);
2049 dc_read_eeprom(sc, (caddr_t)&eaddr, (mac_offset / 2), 3, 0);
2052 dc_read_eeprom(sc, (caddr_t)&eaddr, 0, 3, 1);
2054 case DC_TYPE_DM9102:
2057 dc_read_eeprom(sc, (caddr_t)&eaddr, DC_EE_NODEADDR, 3, 0);
2061 *(u_int32_t *)(&eaddr[0]) = CSR_READ_4(sc,DC_AL_PAR0);
2062 *(u_int16_t *)(&eaddr[4]) = CSR_READ_4(sc,DC_AL_PAR1);
2064 case DC_TYPE_CONEXANT:
2065 bcopy(sc->dc_srom + DC_CONEXANT_EE_NODEADDR, &eaddr, 6);
2067 case DC_TYPE_XIRCOM:
2068 /* The MAC comes from the CIS */
2069 mac = pci_get_ether(dev);
2071 device_printf(dev, "No station address in CIS!\n");
2075 bcopy(mac, eaddr, ETHER_ADDR_LEN);
2078 dc_read_eeprom(sc, (caddr_t)&eaddr, DC_EE_NODEADDR, 3, 0);
2082 sc->dc_ldata = contigmalloc(sizeof(struct dc_list_data), M_DEVBUF,
2083 M_WAITOK | M_ZERO, 0, 0xffffffff, PAGE_SIZE, 0);
2085 if (sc->dc_ldata == NULL) {
2086 device_printf(dev, "no memory for list buffers!\n");
2092 ifp->if_mtu = ETHERMTU;
2093 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
2094 ifp->if_ioctl = dc_ioctl;
2095 ifp->if_start = dc_start;
2096 #ifdef DEVICE_POLLING
2097 ifp->if_poll = dc_poll;
2099 ifp->if_watchdog = dc_watchdog;
2100 ifp->if_init = dc_init;
2101 ifp->if_baudrate = 10000000;
2102 ifq_set_maxlen(&ifp->if_snd, DC_TX_LIST_CNT - 1);
2103 ifq_set_ready(&ifp->if_snd);
2106 * Do MII setup. If this is a 21143, check for a PHY on the
2107 * MII bus after applying any necessary fixups to twiddle the
2108 * GPIO bits. If we don't end up finding a PHY, restore the
2109 * old selection (SIA only or SIA/SYM) and attach the dcphy
2112 if (DC_IS_INTEL(sc)) {
2113 dc_apply_fixup(sc, IFM_AUTO);
2115 sc->dc_pmode = DC_PMODE_MII;
2119 * Setup General Purpose port mode and data so the tulip can talk
2120 * to the MII. This needs to be done before mii_phy_probe so that
2121 * we can actually see them.
2123 if (DC_IS_XIRCOM(sc)) {
2124 CSR_WRITE_4(sc, DC_SIAGP, DC_SIAGP_WRITE_EN | DC_SIAGP_INT1_EN |
2125 DC_SIAGP_MD_GP2_OUTPUT | DC_SIAGP_MD_GP0_OUTPUT);
2127 CSR_WRITE_4(sc, DC_SIAGP, DC_SIAGP_INT1_EN |
2128 DC_SIAGP_MD_GP2_OUTPUT | DC_SIAGP_MD_GP0_OUTPUT);
2132 error = mii_phy_probe(dev, &sc->dc_miibus,
2133 dc_ifmedia_upd, dc_ifmedia_sts);
2135 if (error && DC_IS_INTEL(sc)) {
2137 if (sc->dc_pmode != DC_PMODE_SIA)
2138 sc->dc_pmode = DC_PMODE_SYM;
2139 sc->dc_flags |= DC_21143_NWAY;
2140 mii_phy_probe(dev, &sc->dc_miibus,
2141 dc_ifmedia_upd, dc_ifmedia_sts);
2143 * For non-MII cards, we need to have the 21143
2144 * drive the LEDs. Except there are some systems
2145 * like the NEC VersaPro NoteBook PC which have no
2146 * LEDs, and twiddling these bits has adverse effects
2147 * on them. (I.e. you suddenly can't get a link.)
2149 if (pci_read_config(dev, DC_PCI_CSID, 4) != 0x80281033)
2150 sc->dc_flags |= DC_TULIP_LEDS;
2155 device_printf(dev, "MII without any PHY!\n");
2161 * Call MI attach routine.
2163 ether_ifattach(ifp, eaddr, NULL);
2165 if (DC_IS_ADMTEK(sc)) {
2167 * Set automatic TX underrun recovery for the ADMtek chips
2169 DC_SETBIT(sc, DC_AL_CR, DC_AL_CR_ATUR);
2173 * Tell the upper layer(s) we support long frames.
2175 ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
2177 error = bus_setup_intr(dev, sc->dc_irq, INTR_NETSAFE,
2178 dc_intr, sc, &sc->dc_intrhand,
2179 ifp->if_serializer);
2181 ether_ifdetach(ifp);
2182 device_printf(dev, "couldn't set up irq\n");
2186 ifp->if_cpuid = ithread_cpuid(rman_get_start(sc->dc_irq));
2187 KKASSERT(ifp->if_cpuid >= 0 && ifp->if_cpuid < ncpus);
2197 dc_detach(device_t dev)
2199 struct dc_softc *sc = device_get_softc(dev);
2200 struct ifnet *ifp = &sc->arpcom.ac_if;
2201 struct dc_mediainfo *m;
2203 if (device_is_attached(dev)) {
2204 lwkt_serialize_enter(ifp->if_serializer);
2206 bus_teardown_intr(dev, sc->dc_irq, sc->dc_intrhand);
2207 lwkt_serialize_exit(ifp->if_serializer);
2209 ether_ifdetach(ifp);
2213 device_delete_child(dev, sc->dc_miibus);
2214 bus_generic_detach(dev);
2217 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->dc_irq);
2219 bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res);
2222 contigfree(sc->dc_ldata, sizeof(struct dc_list_data), M_DEVBUF);
2223 if (sc->dc_pnic_rx_buf != NULL)
2224 kfree(sc->dc_pnic_rx_buf, M_DEVBUF);
2226 while (sc->dc_mi != NULL) {
2227 m = sc->dc_mi->dc_next;
2228 kfree(sc->dc_mi, M_DEVBUF);
2233 kfree(sc->dc_srom, M_DEVBUF);
2239 * Initialize the transmit descriptors.
2242 dc_list_tx_init(struct dc_softc *sc)
2244 struct dc_chain_data *cd;
2245 struct dc_list_data *ld;
2250 for (i = 0; i < DC_TX_LIST_CNT; i++) {
2251 if (i == (DC_TX_LIST_CNT - 1)) {
2252 ld->dc_tx_list[i].dc_next =
2253 vtophys(&ld->dc_tx_list[0]);
2255 ld->dc_tx_list[i].dc_next =
2256 vtophys(&ld->dc_tx_list[i + 1]);
2258 cd->dc_tx_chain[i] = NULL;
2259 ld->dc_tx_list[i].dc_data = 0;
2260 ld->dc_tx_list[i].dc_ctl = 0;
2263 cd->dc_tx_prod = cd->dc_tx_cons = cd->dc_tx_cnt = 0;
2270 * Initialize the RX descriptors and allocate mbufs for them. Note that
2271 * we arrange the descriptors in a closed ring, so that the last descriptor
2272 * points back to the first.
2275 dc_list_rx_init(struct dc_softc *sc)
2277 struct dc_chain_data *cd;
2278 struct dc_list_data *ld;
2284 for (i = 0; i < DC_RX_LIST_CNT; i++) {
2285 if (dc_newbuf(sc, i, NULL) == ENOBUFS)
2287 if (i == (DC_RX_LIST_CNT - 1)) {
2288 ld->dc_rx_list[i].dc_next =
2289 vtophys(&ld->dc_rx_list[0]);
2291 ld->dc_rx_list[i].dc_next =
2292 vtophys(&ld->dc_rx_list[i + 1]);
2302 * Initialize an RX descriptor and attach an MBUF cluster.
2305 dc_newbuf(struct dc_softc *sc, int i, struct mbuf *m)
2307 struct mbuf *m_new = NULL;
2310 c = &sc->dc_ldata->dc_rx_list[i];
2313 m_new = m_getcl(MB_DONTWAIT, MT_DATA, M_PKTHDR);
2316 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
2319 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
2320 m_new->m_data = m_new->m_ext.ext_buf;
2323 m_adj(m_new, sizeof(u_int64_t));
2326 * If this is a PNIC chip, zero the buffer. This is part
2327 * of the workaround for the receive bug in the 82c168 and
2330 if (sc->dc_flags & DC_PNIC_RX_BUG_WAR)
2331 bzero((char *)mtod(m_new, char *), m_new->m_len);
2333 sc->dc_cdata.dc_rx_chain[i] = m_new;
2334 c->dc_data = vtophys(mtod(m_new, caddr_t));
2335 c->dc_ctl = DC_RXCTL_RLINK | DC_RXLEN;
2336 c->dc_status = DC_RXSTAT_OWN;
2343 * The PNIC chip has a terrible bug in it that manifests itself during
2344 * periods of heavy activity. The exact mode of failure if difficult to
2345 * pinpoint: sometimes it only happens in promiscuous mode, sometimes it
2346 * will happen on slow machines. The bug is that sometimes instead of
2347 * uploading one complete frame during reception, it uploads what looks
2348 * like the entire contents of its FIFO memory. The frame we want is at
2349 * the end of the whole mess, but we never know exactly how much data has
2350 * been uploaded, so salvaging the frame is hard.
2352 * There is only one way to do it reliably, and it's disgusting.
2353 * Here's what we know:
2355 * - We know there will always be somewhere between one and three extra
2356 * descriptors uploaded.
2358 * - We know the desired received frame will always be at the end of the
2359 * total data upload.
2361 * - We know the size of the desired received frame because it will be
2362 * provided in the length field of the status word in the last descriptor.
2364 * Here's what we do:
2366 * - When we allocate buffers for the receive ring, we bzero() them.
2367 * This means that we know that the buffer contents should be all
2368 * zeros, except for data uploaded by the chip.
2370 * - We also force the PNIC chip to upload frames that include the
2371 * ethernet CRC at the end.
2373 * - We gather all of the bogus frame data into a single buffer.
2375 * - We then position a pointer at the end of this buffer and scan
2376 * backwards until we encounter the first non-zero byte of data.
2377 * This is the end of the received frame. We know we will encounter
2378 * some data at the end of the frame because the CRC will always be
2379 * there, so even if the sender transmits a packet of all zeros,
2380 * we won't be fooled.
2382 * - We know the size of the actual received frame, so we subtract
2383 * that value from the current pointer location. This brings us
2384 * to the start of the actual received packet.
2386 * - We copy this into an mbuf and pass it on, along with the actual
2389 * The performance hit is tremendous, but it beats dropping frames all
2393 #define DC_WHOLEFRAME (DC_RXSTAT_FIRSTFRAG|DC_RXSTAT_LASTFRAG)
2395 dc_pnic_rx_bug_war(struct dc_softc *sc, int idx)
2397 struct dc_desc *cur_rx;
2398 struct dc_desc *c = NULL;
2399 struct mbuf *m = NULL;
2402 u_int32_t rxstat = 0;
2404 i = sc->dc_pnic_rx_bug_save;
2405 cur_rx = &sc->dc_ldata->dc_rx_list[idx];
2406 ptr = sc->dc_pnic_rx_buf;
2407 bzero(ptr, DC_RXLEN * 5);
2409 /* Copy all the bytes from the bogus buffers. */
2411 c = &sc->dc_ldata->dc_rx_list[i];
2412 rxstat = c->dc_status;
2413 m = sc->dc_cdata.dc_rx_chain[i];
2414 bcopy(mtod(m, char *), ptr, DC_RXLEN);
2416 /* If this is the last buffer, break out. */
2417 if (i == idx || rxstat & DC_RXSTAT_LASTFRAG)
2419 dc_newbuf(sc, i, m);
2420 DC_INC(i, DC_RX_LIST_CNT);
2423 /* Find the length of the actual receive frame. */
2424 total_len = DC_RXBYTES(rxstat);
2426 /* Scan backwards until we hit a non-zero byte. */
2431 if ((uintptr_t)(ptr) & 0x3)
2434 /* Now find the start of the frame. */
2436 if (ptr < sc->dc_pnic_rx_buf)
2437 ptr = sc->dc_pnic_rx_buf;
2440 * Now copy the salvaged frame to the last mbuf and fake up
2441 * the status word to make it look like a successful
2444 dc_newbuf(sc, i, m);
2445 bcopy(ptr, mtod(m, char *), total_len);
2446 cur_rx->dc_status = rxstat | DC_RXSTAT_FIRSTFRAG;
2452 * This routine searches the RX ring for dirty descriptors in the
2453 * event that the rxeof routine falls out of sync with the chip's
2454 * current descriptor pointer. This may happen sometimes as a result
2455 * of a "no RX buffer available" condition that happens when the chip
2456 * consumes all of the RX buffers before the driver has a chance to
2457 * process the RX ring. This routine may need to be called more than
2458 * once to bring the driver back in sync with the chip, however we
2459 * should still be getting RX DONE interrupts to drive the search
2460 * for new packets in the RX ring, so we should catch up eventually.
2463 dc_rx_resync(struct dc_softc *sc)
2466 struct dc_desc *cur_rx;
2468 pos = sc->dc_cdata.dc_rx_prod;
2470 for (i = 0; i < DC_RX_LIST_CNT; i++) {
2471 cur_rx = &sc->dc_ldata->dc_rx_list[pos];
2472 if (!(cur_rx->dc_status & DC_RXSTAT_OWN))
2474 DC_INC(pos, DC_RX_LIST_CNT);
2477 /* If the ring really is empty, then just return. */
2478 if (i == DC_RX_LIST_CNT)
2481 /* We've fallen behing the chip: catch it. */
2482 sc->dc_cdata.dc_rx_prod = pos;
2488 * A frame has been uploaded: pass the resulting mbuf chain up to
2489 * the higher level protocols.
2492 dc_rxeof(struct dc_softc *sc)
2496 struct dc_desc *cur_rx;
2497 int i, total_len = 0;
2500 ifp = &sc->arpcom.ac_if;
2501 i = sc->dc_cdata.dc_rx_prod;
2503 while(!(sc->dc_ldata->dc_rx_list[i].dc_status & DC_RXSTAT_OWN)) {
2505 #ifdef DEVICE_POLLING
2506 if (ifp->if_flags & IFF_POLLING) {
2507 if (sc->rxcycles <= 0)
2511 #endif /* DEVICE_POLLING */
2512 cur_rx = &sc->dc_ldata->dc_rx_list[i];
2513 rxstat = cur_rx->dc_status;
2514 m = sc->dc_cdata.dc_rx_chain[i];
2515 total_len = DC_RXBYTES(rxstat);
2517 if (sc->dc_flags & DC_PNIC_RX_BUG_WAR) {
2518 if ((rxstat & DC_WHOLEFRAME) != DC_WHOLEFRAME) {
2519 if (rxstat & DC_RXSTAT_FIRSTFRAG)
2520 sc->dc_pnic_rx_bug_save = i;
2521 if ((rxstat & DC_RXSTAT_LASTFRAG) == 0) {
2522 DC_INC(i, DC_RX_LIST_CNT);
2525 dc_pnic_rx_bug_war(sc, i);
2526 rxstat = cur_rx->dc_status;
2527 total_len = DC_RXBYTES(rxstat);
2531 sc->dc_cdata.dc_rx_chain[i] = NULL;
2534 * If an error occurs, update stats, clear the
2535 * status word and leave the mbuf cluster in place:
2536 * it should simply get re-used next time this descriptor
2537 * comes up in the ring. However, don't report long
2538 * frames as errors since they could be vlans
2540 if ((rxstat & DC_RXSTAT_RXERR)){
2541 if (!(rxstat & DC_RXSTAT_GIANT) ||
2542 (rxstat & (DC_RXSTAT_CRCERR | DC_RXSTAT_DRIBBLE |
2543 DC_RXSTAT_MIIERE | DC_RXSTAT_COLLSEEN |
2544 DC_RXSTAT_RUNT | DC_RXSTAT_DE))) {
2546 if (rxstat & DC_RXSTAT_COLLSEEN)
2547 ifp->if_collisions++;
2548 dc_newbuf(sc, i, m);
2549 if (rxstat & DC_RXSTAT_CRCERR) {
2550 DC_INC(i, DC_RX_LIST_CNT);
2559 /* No errors; receive the packet. */
2560 total_len -= ETHER_CRC_LEN;
2564 * On the x86 we do not have alignment problems, so try to
2565 * allocate a new buffer for the receive ring, and pass up
2566 * the one where the packet is already, saving the expensive
2567 * copy done in m_devget().
2568 * If we are on an architecture with alignment problems, or
2569 * if the allocation fails, then use m_devget and leave the
2570 * existing buffer in the receive ring.
2572 if (dc_quick && dc_newbuf(sc, i, NULL) == 0) {
2573 m->m_pkthdr.rcvif = ifp;
2574 m->m_pkthdr.len = m->m_len = total_len;
2575 DC_INC(i, DC_RX_LIST_CNT);
2581 m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
2582 total_len + ETHER_ALIGN, 0, ifp, NULL);
2583 dc_newbuf(sc, i, m);
2584 DC_INC(i, DC_RX_LIST_CNT);
2589 m_adj(m0, ETHER_ALIGN);
2594 ifp->if_input(ifp, m);
2597 sc->dc_cdata.dc_rx_prod = i;
2601 * A frame was downloaded to the chip. It's safe for us to clean up
2606 dc_txeof(struct dc_softc *sc)
2608 struct dc_desc *cur_tx = NULL;
2612 ifp = &sc->arpcom.ac_if;
2615 * Go through our tx list and free mbufs for those
2616 * frames that have been transmitted.
2618 idx = sc->dc_cdata.dc_tx_cons;
2619 while(idx != sc->dc_cdata.dc_tx_prod) {
2622 cur_tx = &sc->dc_ldata->dc_tx_list[idx];
2623 txstat = cur_tx->dc_status;
2625 if (txstat & DC_TXSTAT_OWN)
2628 if (!(cur_tx->dc_ctl & DC_TXCTL_LASTFRAG) ||
2629 cur_tx->dc_ctl & DC_TXCTL_SETUP) {
2630 if (cur_tx->dc_ctl & DC_TXCTL_SETUP) {
2632 * Yes, the PNIC is so brain damaged
2633 * that it will sometimes generate a TX
2634 * underrun error while DMAing the RX
2635 * filter setup frame. If we detect this,
2636 * we have to send the setup frame again,
2637 * or else the filter won't be programmed
2640 if (DC_IS_PNIC(sc)) {
2641 if (txstat & DC_TXSTAT_ERRSUM)
2644 sc->dc_cdata.dc_tx_chain[idx] = NULL;
2646 sc->dc_cdata.dc_tx_cnt--;
2647 DC_INC(idx, DC_TX_LIST_CNT);
2651 if (DC_IS_XIRCOM(sc) || DC_IS_CONEXANT(sc)) {
2653 * XXX: Why does my Xircom taunt me so?
2654 * For some reason Conexant chips like
2655 * setting the CARRLOST flag even when
2656 * the carrier is there. In CURRENT we
2657 * have the same problem for Xircom
2660 if (/*sc->dc_type == DC_TYPE_21143 &&*/
2661 sc->dc_pmode == DC_PMODE_MII &&
2662 ((txstat & 0xFFFF) & ~(DC_TXSTAT_ERRSUM|
2663 DC_TXSTAT_NOCARRIER)))
2664 txstat &= ~DC_TXSTAT_ERRSUM;
2666 if (/*sc->dc_type == DC_TYPE_21143 &&*/
2667 sc->dc_pmode == DC_PMODE_MII &&
2668 ((txstat & 0xFFFF) & ~(DC_TXSTAT_ERRSUM|
2669 DC_TXSTAT_NOCARRIER|DC_TXSTAT_CARRLOST)))
2670 txstat &= ~DC_TXSTAT_ERRSUM;
2673 if (txstat & DC_TXSTAT_ERRSUM) {
2675 if (txstat & DC_TXSTAT_EXCESSCOLL)
2676 ifp->if_collisions++;
2677 if (txstat & DC_TXSTAT_LATECOLL)
2678 ifp->if_collisions++;
2679 if (!(txstat & DC_TXSTAT_UNDERRUN)) {
2685 ifp->if_collisions += (txstat & DC_TXSTAT_COLLCNT) >> 3;
2688 if (sc->dc_cdata.dc_tx_chain[idx] != NULL) {
2689 m_freem(sc->dc_cdata.dc_tx_chain[idx]);
2690 sc->dc_cdata.dc_tx_chain[idx] = NULL;
2693 sc->dc_cdata.dc_tx_cnt--;
2694 DC_INC(idx, DC_TX_LIST_CNT);
2697 if (idx != sc->dc_cdata.dc_tx_cons) {
2698 /* some buffers have been freed */
2699 sc->dc_cdata.dc_tx_cons = idx;
2700 ifp->if_flags &= ~IFF_OACTIVE;
2702 ifp->if_timer = (sc->dc_cdata.dc_tx_cnt == 0) ? 0 : 5;
2710 struct dc_softc *sc = xsc;
2711 struct ifnet *ifp = &sc->arpcom.ac_if;
2712 struct mii_data *mii;
2715 lwkt_serialize_enter(ifp->if_serializer);
2717 mii = device_get_softc(sc->dc_miibus);
2719 if (sc->dc_flags & DC_REDUCED_MII_POLL) {
2720 if (sc->dc_flags & DC_21143_NWAY) {
2721 r = CSR_READ_4(sc, DC_10BTSTAT);
2722 if (IFM_SUBTYPE(mii->mii_media_active) ==
2723 IFM_100_TX && (r & DC_TSTAT_LS100)) {
2727 if (IFM_SUBTYPE(mii->mii_media_active) ==
2728 IFM_10_T && (r & DC_TSTAT_LS10)) {
2732 if (sc->dc_link == 0)
2735 r = CSR_READ_4(sc, DC_ISR);
2736 if ((r & DC_ISR_RX_STATE) == DC_RXSTATE_WAIT &&
2737 sc->dc_cdata.dc_tx_cnt == 0) {
2739 if (!(mii->mii_media_status & IFM_ACTIVE))
2748 * When the init routine completes, we expect to be able to send
2749 * packets right away, and in fact the network code will send a
2750 * gratuitous ARP the moment the init routine marks the interface
2751 * as running. However, even though the MAC may have been initialized,
2752 * there may be a delay of a few seconds before the PHY completes
2753 * autonegotiation and the link is brought up. Any transmissions
2754 * made during that delay will be lost. Dealing with this is tricky:
2755 * we can't just pause in the init routine while waiting for the
2756 * PHY to come ready since that would bring the whole system to
2757 * a screeching halt for several seconds.
2759 * What we do here is prevent the TX start routine from sending
2760 * any packets until a link has been established. After the
2761 * interface has been initialized, the tick routine will poll
2762 * the state of the PHY until the IFM_ACTIVE flag is set. Until
2763 * that time, packets will stay in the send queue, and once the
2764 * link comes up, they will be flushed out to the wire.
2768 if (mii->mii_media_status & IFM_ACTIVE &&
2769 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
2771 if (!ifq_is_empty(&ifp->if_snd))
2776 if (sc->dc_flags & DC_21143_NWAY && !sc->dc_link)
2777 callout_reset(&sc->dc_stat_timer, hz / 10, dc_tick, sc);
2779 callout_reset(&sc->dc_stat_timer, hz, dc_tick, sc);
2781 lwkt_serialize_exit(ifp->if_serializer);
2785 * A transmit underrun has occurred. Back off the transmit threshold,
2786 * or switch to store and forward mode if we have to.
2789 dc_tx_underrun(struct dc_softc *sc)
2794 if (DC_IS_DAVICOM(sc))
2797 if (DC_IS_INTEL(sc)) {
2799 * The real 21143 requires that the transmitter be idle
2800 * in order to change the transmit threshold or store
2801 * and forward state.
2803 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON);
2805 for (i = 0; i < DC_TIMEOUT; i++) {
2806 isr = CSR_READ_4(sc, DC_ISR);
2807 if (isr & DC_ISR_TX_IDLE)
2811 if (i == DC_TIMEOUT) {
2812 if_printf(&sc->arpcom.ac_if,
2813 "failed to force tx to idle state\n");
2818 if_printf(&sc->arpcom.ac_if, "TX underrun -- ");
2819 sc->dc_txthresh += DC_TXTHRESH_INC;
2820 if (sc->dc_txthresh > DC_TXTHRESH_MAX) {
2821 kprintf("using store and forward mode\n");
2822 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD);
2824 kprintf("increasing TX threshold\n");
2825 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_THRESH);
2826 DC_SETBIT(sc, DC_NETCFG, sc->dc_txthresh);
2829 if (DC_IS_INTEL(sc))
2830 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON);
2835 #ifdef DEVICE_POLLING
2838 dc_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
2840 struct dc_softc *sc = ifp->if_softc;
2845 /* Disable interrupts */
2846 CSR_WRITE_4(sc, DC_IMR, 0x00000000);
2848 case POLL_DEREGISTER:
2849 /* Re-enable interrupts. */
2850 CSR_WRITE_4(sc, DC_IMR, DC_INTRS);
2853 sc->rxcycles = count;
2856 if ((ifp->if_flags & IFF_OACTIVE) == 0 && !ifq_is_empty(&ifp->if_snd))
2859 case POLL_AND_CHECK_STATUS:
2860 sc->rxcycles = count;
2863 if ((ifp->if_flags & IFF_OACTIVE) == 0 && !ifq_is_empty(&ifp->if_snd))
2865 status = CSR_READ_4(sc, DC_ISR);
2866 status &= (DC_ISR_RX_WATDOGTIMEO|DC_ISR_RX_NOBUF|
2867 DC_ISR_TX_NOBUF|DC_ISR_TX_IDLE|DC_ISR_TX_UNDERRUN|
2871 /* ack what we have */
2872 CSR_WRITE_4(sc, DC_ISR, status);
2874 if (status & (DC_ISR_RX_WATDOGTIMEO|DC_ISR_RX_NOBUF) ) {
2875 u_int32_t r = CSR_READ_4(sc, DC_FRAMESDISCARDED);
2876 ifp->if_ierrors += (r & 0xffff) + ((r >> 17) & 0x7ff);
2878 if (dc_rx_resync(sc))
2881 /* restart transmit unit if necessary */
2882 if (status & DC_ISR_TX_IDLE && sc->dc_cdata.dc_tx_cnt)
2883 CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF);
2885 if (status & DC_ISR_TX_UNDERRUN)
2888 if (status & DC_ISR_BUS_ERR) {
2889 if_printf(ifp, "dc_poll: bus error\n");
2896 #endif /* DEVICE_POLLING */
2901 struct dc_softc *sc;
2907 if (sc->suspended) {
2911 ifp = &sc->arpcom.ac_if;
2913 if ( (CSR_READ_4(sc, DC_ISR) & DC_INTRS) == 0)
2916 /* Suppress unwanted interrupts */
2917 if ((ifp->if_flags & IFF_RUNNING) == 0) {
2918 if (CSR_READ_4(sc, DC_ISR) & DC_INTRS)
2923 /* Disable interrupts. */
2924 CSR_WRITE_4(sc, DC_IMR, 0x00000000);
2926 while(((status = CSR_READ_4(sc, DC_ISR)) & DC_INTRS) &&
2927 status != 0xFFFFFFFF) {
2929 CSR_WRITE_4(sc, DC_ISR, status);
2931 if (status & DC_ISR_RX_OK) {
2933 curpkts = ifp->if_ipackets;
2935 if (curpkts == ifp->if_ipackets) {
2936 while(dc_rx_resync(sc))
2941 if (status & (DC_ISR_TX_OK|DC_ISR_TX_NOBUF))
2944 if (status & DC_ISR_TX_IDLE) {
2946 if (sc->dc_cdata.dc_tx_cnt) {
2947 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON);
2948 CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF);
2952 if (status & DC_ISR_TX_UNDERRUN)
2955 if ((status & DC_ISR_RX_WATDOGTIMEO)
2956 || (status & DC_ISR_RX_NOBUF)) {
2958 curpkts = ifp->if_ipackets;
2960 if (curpkts == ifp->if_ipackets) {
2961 while(dc_rx_resync(sc))
2966 if (status & DC_ISR_BUS_ERR) {
2972 /* Re-enable interrupts. */
2973 CSR_WRITE_4(sc, DC_IMR, DC_INTRS);
2975 if (!ifq_is_empty(&ifp->if_snd))
2980 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
2981 * pointers to the fragment pointers.
2984 dc_encap(struct dc_softc *sc, struct mbuf *m_head, u_int32_t *txidx)
2986 struct dc_desc *f = NULL;
2988 int frag, cur, cnt = 0;
2991 * Start packing the mbufs in this chain into
2992 * the fragment pointers. Stop when we run out
2993 * of fragments or hit the end of the mbuf chain.
2996 cur = frag = *txidx;
2998 for (m = m_head; m != NULL; m = m->m_next) {
2999 if (m->m_len != 0) {
3000 if (sc->dc_flags & DC_TX_ADMTEK_WAR) {
3001 if (*txidx != sc->dc_cdata.dc_tx_prod &&
3002 frag == (DC_TX_LIST_CNT - 1))
3005 if ((DC_TX_LIST_CNT -
3006 (sc->dc_cdata.dc_tx_cnt + cnt)) < 5)
3009 f = &sc->dc_ldata->dc_tx_list[frag];
3010 f->dc_ctl = DC_TXCTL_TLINK | m->m_len;
3013 f->dc_ctl |= DC_TXCTL_FIRSTFRAG;
3015 f->dc_status = DC_TXSTAT_OWN;
3016 f->dc_data = vtophys(mtod(m, vm_offset_t));
3018 DC_INC(frag, DC_TX_LIST_CNT);
3026 sc->dc_cdata.dc_tx_cnt += cnt;
3027 sc->dc_cdata.dc_tx_chain[cur] = m_head;
3028 sc->dc_ldata->dc_tx_list[cur].dc_ctl |= DC_TXCTL_LASTFRAG;
3029 if (sc->dc_flags & DC_TX_INTR_FIRSTFRAG)
3030 sc->dc_ldata->dc_tx_list[*txidx].dc_ctl |= DC_TXCTL_FINT;
3031 if (sc->dc_flags & DC_TX_INTR_ALWAYS)
3032 sc->dc_ldata->dc_tx_list[cur].dc_ctl |= DC_TXCTL_FINT;
3033 if (sc->dc_flags & DC_TX_USE_TX_INTR && sc->dc_cdata.dc_tx_cnt > 64)
3034 sc->dc_ldata->dc_tx_list[cur].dc_ctl |= DC_TXCTL_FINT;
3035 sc->dc_ldata->dc_tx_list[*txidx].dc_status = DC_TXSTAT_OWN;
3042 * Main transmit routine. To avoid having to do mbuf copies, we put pointers
3043 * to the mbuf data regions directly in the transmit lists. We also save a
3044 * copy of the pointers since the transmit list fragment pointers are
3045 * physical addresses.
3049 dc_start(struct ifnet *ifp)
3051 struct dc_softc *sc;
3052 struct mbuf *m_head, *m_defragged;
3053 int idx, need_trans;
3058 ifq_purge(&ifp->if_snd);
3062 if (ifp->if_flags & IFF_OACTIVE)
3065 idx = sc->dc_cdata.dc_tx_prod;
3068 while(sc->dc_cdata.dc_tx_chain[idx] == NULL) {
3070 m_head = ifq_dequeue(&ifp->if_snd, NULL);
3074 if ((sc->dc_flags & DC_TX_COALESCE) &&
3075 (m_head->m_next != NULL || (sc->dc_flags & DC_TX_ALIGN))) {
3077 * Check first if coalescing allows us to queue
3078 * the packet. We don't want to loose it if
3079 * the TX queue is full.
3081 if ((sc->dc_flags & DC_TX_ADMTEK_WAR) &&
3082 idx != sc->dc_cdata.dc_tx_prod &&
3083 idx == (DC_TX_LIST_CNT - 1)) {
3084 ifp->if_flags |= IFF_OACTIVE;
3085 ifq_prepend(&ifp->if_snd, m_head);
3088 if ((DC_TX_LIST_CNT - sc->dc_cdata.dc_tx_cnt) < 5) {
3089 ifp->if_flags |= IFF_OACTIVE;
3090 ifq_prepend(&ifp->if_snd, m_head);
3094 /* only coalesce if have >1 mbufs */
3095 m_defragged = m_defrag(m_head, MB_DONTWAIT);
3096 if (m_defragged == NULL) {
3097 ifp->if_flags |= IFF_OACTIVE;
3098 ifq_prepend(&ifp->if_snd, m_head);
3101 m_head = m_defragged;
3104 if (dc_encap(sc, m_head, &idx)) {
3107 * Throw away the original packet if the
3108 * defragged packet could not be encapsulated,
3109 * as well as the defragged packet.
3113 ifq_prepend(&ifp->if_snd, m_head);
3115 ifp->if_flags |= IFF_OACTIVE;
3122 * If there's a BPF listener, bounce a copy of this frame
3125 BPF_MTAP(ifp, m_head);
3127 if (sc->dc_flags & DC_TX_ONE) {
3128 ifp->if_flags |= IFF_OACTIVE;
3137 sc->dc_cdata.dc_tx_prod = idx;
3138 if (!(sc->dc_flags & DC_TX_POLL))
3139 CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF);
3142 * Set a timeout in case the chip goes out to lunch.
3150 struct dc_softc *sc = xsc;
3151 struct ifnet *ifp = &sc->arpcom.ac_if;
3152 struct mii_data *mii;
3154 mii = device_get_softc(sc->dc_miibus);
3157 * Cancel pending I/O and free all RX/TX buffers.
3163 * Set cache alignment and burst length.
3165 if (DC_IS_ASIX(sc) || DC_IS_DAVICOM(sc))
3166 CSR_WRITE_4(sc, DC_BUSCTL, 0);
3168 CSR_WRITE_4(sc, DC_BUSCTL, DC_BUSCTL_MRME|DC_BUSCTL_MRLE);
3170 * Evenly share the bus between receive and transmit process.
3172 if (DC_IS_INTEL(sc))
3173 DC_SETBIT(sc, DC_BUSCTL, DC_BUSCTL_ARBITRATION);
3174 if (DC_IS_DAVICOM(sc) || DC_IS_INTEL(sc)) {
3175 DC_SETBIT(sc, DC_BUSCTL, DC_BURSTLEN_USECA);
3177 DC_SETBIT(sc, DC_BUSCTL, DC_BURSTLEN_16LONG);
3179 if (sc->dc_flags & DC_TX_POLL)
3180 DC_SETBIT(sc, DC_BUSCTL, DC_TXPOLL_1);
3181 switch(sc->dc_cachesize) {
3183 DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_32LONG);
3186 DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_16LONG);
3189 DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_8LONG);
3193 DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_NONE);
3197 if (sc->dc_flags & DC_TX_STORENFWD)
3198 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD);
3200 if (sc->dc_txthresh > DC_TXTHRESH_MAX) {
3201 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD);
3203 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD);
3204 DC_SETBIT(sc, DC_NETCFG, sc->dc_txthresh);
3208 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_NO_RXCRC);
3209 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_BACKOFF);
3211 if (DC_IS_MACRONIX(sc) || DC_IS_PNICII(sc)) {
3213 * The app notes for the 98713 and 98715A say that
3214 * in order to have the chips operate properly, a magic
3215 * number must be written to CSR16. Macronix does not
3216 * document the meaning of these bits so there's no way
3217 * to know exactly what they do. The 98713 has a magic
3218 * number all its own; the rest all use a different one.
3220 DC_CLRBIT(sc, DC_MX_MAGICPACKET, 0xFFFF0000);
3221 if (sc->dc_type == DC_TYPE_98713)
3222 DC_SETBIT(sc, DC_MX_MAGICPACKET, DC_MX_MAGIC_98713);
3224 DC_SETBIT(sc, DC_MX_MAGICPACKET, DC_MX_MAGIC_98715);
3227 if (DC_IS_XIRCOM(sc)) {
3229 * Setup General Purpose Port mode and data so the tulip
3230 * can talk to the MII.
3232 CSR_WRITE_4(sc, DC_SIAGP, DC_SIAGP_WRITE_EN | DC_SIAGP_INT1_EN |
3233 DC_SIAGP_MD_GP2_OUTPUT | DC_SIAGP_MD_GP0_OUTPUT);
3235 CSR_WRITE_4(sc, DC_SIAGP, DC_SIAGP_INT1_EN |
3236 DC_SIAGP_MD_GP2_OUTPUT | DC_SIAGP_MD_GP0_OUTPUT);
3240 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_THRESH);
3241 DC_SETBIT(sc, DC_NETCFG, DC_TXTHRESH_MIN);
3243 /* Init circular RX list. */
3244 if (dc_list_rx_init(sc) == ENOBUFS) {
3245 if_printf(ifp, "initialization failed: no "
3246 "memory for rx buffers\n");
3252 * Init tx descriptors.
3254 dc_list_tx_init(sc);
3257 * Load the address of the RX list.
3259 CSR_WRITE_4(sc, DC_RXADDR, vtophys(&sc->dc_ldata->dc_rx_list[0]));
3260 CSR_WRITE_4(sc, DC_TXADDR, vtophys(&sc->dc_ldata->dc_tx_list[0]));
3263 * Enable interrupts.
3265 #ifdef DEVICE_POLLING
3267 * ... but only if we are not polling, and make sure they are off in
3268 * the case of polling. Some cards (e.g. fxp) turn interrupts on
3271 if (ifp->if_flags & IFF_POLLING)
3272 CSR_WRITE_4(sc, DC_IMR, 0x00000000);
3275 CSR_WRITE_4(sc, DC_IMR, DC_INTRS);
3276 CSR_WRITE_4(sc, DC_ISR, 0xFFFFFFFF);
3278 /* Enable transmitter. */
3279 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON);
3282 * If this is an Intel 21143 and we're not using the
3283 * MII port, program the LED control pins so we get
3284 * link and activity indications.
3286 if (sc->dc_flags & DC_TULIP_LEDS) {
3287 CSR_WRITE_4(sc, DC_WATCHDOG,
3288 DC_WDOG_CTLWREN|DC_WDOG_LINK|DC_WDOG_ACTIVITY);
3289 CSR_WRITE_4(sc, DC_WATCHDOG, 0);
3293 * Set IFF_RUNNING here to keep the assertion in dc_setfilt()
3296 ifp->if_flags |= IFF_RUNNING;
3297 ifp->if_flags &= ~IFF_OACTIVE;
3300 * Load the RX/multicast filter. We do this sort of late
3301 * because the filter programming scheme on the 21143 and
3302 * some clones requires DMAing a setup frame via the TX
3303 * engine, and we need the transmitter enabled for that.
3307 /* Enable receiver. */
3308 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ON);
3309 CSR_WRITE_4(sc, DC_RXSTART, 0xFFFFFFFF);
3312 dc_setcfg(sc, sc->dc_if_media);
3314 /* Don't start the ticker if this is a homePNA link. */
3315 if (IFM_SUBTYPE(mii->mii_media.ifm_media) == IFM_HPNA_1)
3318 if (sc->dc_flags & DC_21143_NWAY)
3319 callout_reset(&sc->dc_stat_timer, hz/10, dc_tick, sc);
3321 callout_reset(&sc->dc_stat_timer, hz, dc_tick, sc);
3326 * Set media options.
3329 dc_ifmedia_upd(struct ifnet *ifp)
3331 struct dc_softc *sc;
3332 struct mii_data *mii;
3333 struct ifmedia *ifm;
3336 mii = device_get_softc(sc->dc_miibus);
3338 ifm = &mii->mii_media;
3340 if (DC_IS_DAVICOM(sc) &&
3341 IFM_SUBTYPE(ifm->ifm_media) == IFM_HPNA_1)
3342 dc_setcfg(sc, ifm->ifm_media);
3350 * Report current media status.
3353 dc_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
3355 struct dc_softc *sc;
3356 struct mii_data *mii;
3357 struct ifmedia *ifm;
3360 mii = device_get_softc(sc->dc_miibus);
3362 ifm = &mii->mii_media;
3363 if (DC_IS_DAVICOM(sc)) {
3364 if (IFM_SUBTYPE(ifm->ifm_media) == IFM_HPNA_1) {
3365 ifmr->ifm_active = ifm->ifm_media;
3366 ifmr->ifm_status = 0;
3370 ifmr->ifm_active = mii->mii_media_active;
3371 ifmr->ifm_status = mii->mii_media_status;
3377 dc_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr)
3379 struct dc_softc *sc = ifp->if_softc;
3380 struct ifreq *ifr = (struct ifreq *) data;
3381 struct mii_data *mii;
3386 if (ifp->if_flags & IFF_UP) {
3387 int need_setfilt = (ifp->if_flags ^ sc->dc_if_flags) &
3388 (IFF_PROMISC | IFF_ALLMULTI);
3389 if (ifp->if_flags & IFF_RUNNING) {
3393 sc->dc_txthresh = 0;
3397 if (ifp->if_flags & IFF_RUNNING)
3400 sc->dc_if_flags = ifp->if_flags;
3404 if (ifp->if_flags & IFF_RUNNING)
3409 mii = device_get_softc(sc->dc_miibus);
3410 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
3413 error = ether_ioctl(ifp, command, data);
3421 dc_watchdog(struct ifnet *ifp)
3423 struct dc_softc *sc;
3428 if_printf(ifp, "watchdog timeout\n");
3434 if (!ifq_is_empty(&ifp->if_snd))
3439 * Stop the adapter and free any mbufs allocated to the
3443 dc_stop(struct dc_softc *sc)
3448 ifp = &sc->arpcom.ac_if;
3451 callout_stop(&sc->dc_stat_timer);
3453 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
3455 DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_RX_ON|DC_NETCFG_TX_ON));
3456 CSR_WRITE_4(sc, DC_IMR, 0x00000000);
3457 CSR_WRITE_4(sc, DC_TXADDR, 0x00000000);
3458 CSR_WRITE_4(sc, DC_RXADDR, 0x00000000);
3462 * Free data in the RX lists.
3464 for (i = 0; i < DC_RX_LIST_CNT; i++) {
3465 if (sc->dc_cdata.dc_rx_chain[i] != NULL) {
3466 m_freem(sc->dc_cdata.dc_rx_chain[i]);
3467 sc->dc_cdata.dc_rx_chain[i] = NULL;
3470 bzero((char *)&sc->dc_ldata->dc_rx_list,
3471 sizeof(sc->dc_ldata->dc_rx_list));
3474 * Free the TX list buffers.
3476 for (i = 0; i < DC_TX_LIST_CNT; i++) {
3477 if (sc->dc_cdata.dc_tx_chain[i] != NULL) {
3478 if ((sc->dc_ldata->dc_tx_list[i].dc_ctl &
3480 !(sc->dc_ldata->dc_tx_list[i].dc_ctl &
3481 DC_TXCTL_LASTFRAG)) {
3482 sc->dc_cdata.dc_tx_chain[i] = NULL;
3485 m_freem(sc->dc_cdata.dc_tx_chain[i]);
3486 sc->dc_cdata.dc_tx_chain[i] = NULL;
3489 bzero((char *)&sc->dc_ldata->dc_tx_list,
3490 sizeof(sc->dc_ldata->dc_tx_list));
3494 * Stop all chip I/O so that the kernel's probe routines don't
3495 * get confused by errant DMAs when rebooting.
3498 dc_shutdown(device_t dev)
3500 struct dc_softc *sc;
3503 sc = device_get_softc(dev);
3504 ifp = &sc->arpcom.ac_if;
3505 lwkt_serialize_enter(ifp->if_serializer);
3509 lwkt_serialize_exit(ifp->if_serializer);
3513 * Device suspend routine. Stop the interface and save some PCI
3514 * settings in case the BIOS doesn't restore them properly on
3518 dc_suspend(device_t dev)
3520 struct dc_softc *sc = device_get_softc(dev);
3521 struct ifnet *ifp = &sc->arpcom.ac_if;
3523 lwkt_serialize_enter(ifp->if_serializer);
3526 for (i = 0; i < 5; i++)
3527 sc->saved_maps[i] = pci_read_config(dev, PCIR_MAPS + i * 4, 4);
3528 sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4);
3529 sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1);
3530 sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1);
3531 sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1);
3535 lwkt_serialize_exit(ifp->if_serializer);
3540 * Device resume routine. Restore some PCI settings in case the BIOS
3541 * doesn't, re-enable busmastering, and restart the interface if
3545 dc_resume(device_t dev)
3547 struct dc_softc *sc = device_get_softc(dev);
3548 struct ifnet *ifp = &sc->arpcom.ac_if;
3551 lwkt_serialize_enter(ifp->if_serializer);
3554 /* better way to do this? */
3555 for (i = 0; i < 5; i++)
3556 pci_write_config(dev, PCIR_MAPS + i * 4, sc->saved_maps[i], 4);
3557 pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4);
3558 pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1);
3559 pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1);
3560 pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1);
3562 /* reenable busmastering */
3563 pci_enable_busmaster(dev);
3564 pci_enable_io(dev, DC_RES);
3566 /* reinitialize interface if necessary */
3567 if (ifp->if_flags & IFF_UP)
3571 lwkt_serialize_exit(ifp->if_serializer);
3577 dc_mchash_xircom(struct dc_softc *sc, const uint8_t *addr)
3581 /* Compute CRC for the address value. */
3582 crc = ether_crc32_le(addr, ETHER_ADDR_LEN);
3584 if ((crc & 0x180) == 0x180)
3585 return ((crc & 0x0F) + (crc & 0x70) * 3 + (14 << 4));
3587 return ((crc & 0x1F) + ((crc >> 1) & 0xF0) * 3 + (12 << 4));
projects / dragonfly.git / blob