Merge branch 'vendor/BMAKE'
[dragonfly.git] / sys / contrib / dev / acpica / source / components / utilities / utresrc.c
1 /*******************************************************************************
2  *
3  * Module Name: utresrc - Resource management utilities
4  *
5  ******************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2016, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include "acpi.h"
45 #include "accommon.h"
46 #include "acresrc.h"
47
48
49 #define _COMPONENT          ACPI_UTILITIES
50         ACPI_MODULE_NAME    ("utresrc")
51
52
53 #if defined(ACPI_DEBUG_OUTPUT) || defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
54
55 /*
56  * Strings used to decode resource descriptors.
57  * Used by both the disassembler and the debugger resource dump routines
58  */
59 const char                      *AcpiGbl_BmDecode[] =
60 {
61     "NotBusMaster",
62     "BusMaster"
63 };
64
65 const char                      *AcpiGbl_ConfigDecode[] =
66 {
67     "0 - Good Configuration",
68     "1 - Acceptable Configuration",
69     "2 - Suboptimal Configuration",
70     "3 - ***Invalid Configuration***",
71 };
72
73 const char                      *AcpiGbl_ConsumeDecode[] =
74 {
75     "ResourceProducer",
76     "ResourceConsumer"
77 };
78
79 const char                      *AcpiGbl_DecDecode[] =
80 {
81     "PosDecode",
82     "SubDecode"
83 };
84
85 const char                      *AcpiGbl_HeDecode[] =
86 {
87     "Level",
88     "Edge"
89 };
90
91 const char                      *AcpiGbl_IoDecode[] =
92 {
93     "Decode10",
94     "Decode16"
95 };
96
97 const char                      *AcpiGbl_LlDecode[] =
98 {
99     "ActiveHigh",
100     "ActiveLow",
101     "ActiveBoth",
102     "Reserved"
103 };
104
105 const char                      *AcpiGbl_MaxDecode[] =
106 {
107     "MaxNotFixed",
108     "MaxFixed"
109 };
110
111 const char                      *AcpiGbl_MemDecode[] =
112 {
113     "NonCacheable",
114     "Cacheable",
115     "WriteCombining",
116     "Prefetchable"
117 };
118
119 const char                      *AcpiGbl_MinDecode[] =
120 {
121     "MinNotFixed",
122     "MinFixed"
123 };
124
125 const char                      *AcpiGbl_MtpDecode[] =
126 {
127     "AddressRangeMemory",
128     "AddressRangeReserved",
129     "AddressRangeACPI",
130     "AddressRangeNVS"
131 };
132
133 const char                      *AcpiGbl_RngDecode[] =
134 {
135     "InvalidRanges",
136     "NonISAOnlyRanges",
137     "ISAOnlyRanges",
138     "EntireRange"
139 };
140
141 const char                      *AcpiGbl_RwDecode[] =
142 {
143     "ReadOnly",
144     "ReadWrite"
145 };
146
147 const char                      *AcpiGbl_ShrDecode[] =
148 {
149     "Exclusive",
150     "Shared",
151     "ExclusiveAndWake",         /* ACPI 5.0 */
152     "SharedAndWake"             /* ACPI 5.0 */
153 };
154
155 const char                      *AcpiGbl_SizDecode[] =
156 {
157     "Transfer8",
158     "Transfer8_16",
159     "Transfer16",
160     "InvalidSize"
161 };
162
163 const char                      *AcpiGbl_TrsDecode[] =
164 {
165     "DenseTranslation",
166     "SparseTranslation"
167 };
168
169 const char                      *AcpiGbl_TtpDecode[] =
170 {
171     "TypeStatic",
172     "TypeTranslation"
173 };
174
175 const char                      *AcpiGbl_TypDecode[] =
176 {
177     "Compatibility",
178     "TypeA",
179     "TypeB",
180     "TypeF"
181 };
182
183 const char                      *AcpiGbl_PpcDecode[] =
184 {
185     "PullDefault",
186     "PullUp",
187     "PullDown",
188     "PullNone"
189 };
190
191 const char                      *AcpiGbl_IorDecode[] =
192 {
193     "IoRestrictionNone",
194     "IoRestrictionInputOnly",
195     "IoRestrictionOutputOnly",
196     "IoRestrictionNoneAndPreserve"
197 };
198
199 const char                      *AcpiGbl_DtsDecode[] =
200 {
201     "Width8bit",
202     "Width16bit",
203     "Width32bit",
204     "Width64bit",
205     "Width128bit",
206     "Width256bit",
207 };
208
209 /* GPIO connection type */
210
211 const char                      *AcpiGbl_CtDecode[] =
212 {
213     "Interrupt",
214     "I/O"
215 };
216
217 /* Serial bus type */
218
219 const char                      *AcpiGbl_SbtDecode[] =
220 {
221     "/* UNKNOWN serial bus type */",
222     "I2C",
223     "SPI",
224     "UART"
225 };
226
227 /* I2C serial bus access mode */
228
229 const char                      *AcpiGbl_AmDecode[] =
230 {
231     "AddressingMode7Bit",
232     "AddressingMode10Bit"
233 };
234
235 /* I2C serial bus slave mode */
236
237 const char                      *AcpiGbl_SmDecode[] =
238 {
239     "ControllerInitiated",
240     "DeviceInitiated"
241 };
242
243 /* SPI serial bus wire mode */
244
245 const char                      *AcpiGbl_WmDecode[] =
246 {
247     "FourWireMode",
248     "ThreeWireMode"
249 };
250
251 /* SPI serial clock phase */
252
253 const char                      *AcpiGbl_CphDecode[] =
254 {
255     "ClockPhaseFirst",
256     "ClockPhaseSecond"
257 };
258
259 /* SPI serial bus clock polarity */
260
261 const char                      *AcpiGbl_CpoDecode[] =
262 {
263     "ClockPolarityLow",
264     "ClockPolarityHigh"
265 };
266
267 /* SPI serial bus device polarity */
268
269 const char                      *AcpiGbl_DpDecode[] =
270 {
271     "PolarityLow",
272     "PolarityHigh"
273 };
274
275 /* UART serial bus endian */
276
277 const char                      *AcpiGbl_EdDecode[] =
278 {
279     "LittleEndian",
280     "BigEndian"
281 };
282
283 /* UART serial bus bits per byte */
284
285 const char                      *AcpiGbl_BpbDecode[] =
286 {
287     "DataBitsFive",
288     "DataBitsSix",
289     "DataBitsSeven",
290     "DataBitsEight",
291     "DataBitsNine",
292     "/* UNKNOWN Bits per byte */",
293     "/* UNKNOWN Bits per byte */",
294     "/* UNKNOWN Bits per byte */"
295 };
296
297 /* UART serial bus stop bits */
298
299 const char                      *AcpiGbl_SbDecode[] =
300 {
301     "StopBitsZero",
302     "StopBitsOne",
303     "StopBitsOnePlusHalf",
304     "StopBitsTwo"
305 };
306
307 /* UART serial bus flow control */
308
309 const char                      *AcpiGbl_FcDecode[] =
310 {
311     "FlowControlNone",
312     "FlowControlHardware",
313     "FlowControlXON",
314     "/* UNKNOWN flow control keyword */"
315 };
316
317 /* UART serial bus parity type */
318
319 const char                      *AcpiGbl_PtDecode[] =
320 {
321     "ParityTypeNone",
322     "ParityTypeEven",
323     "ParityTypeOdd",
324     "ParityTypeMark",
325     "ParityTypeSpace",
326     "/* UNKNOWN parity keyword */",
327     "/* UNKNOWN parity keyword */",
328     "/* UNKNOWN parity keyword */"
329 };
330
331 #endif
332
333
334 /*
335  * Base sizes of the raw AML resource descriptors, indexed by resource type.
336  * Zero indicates a reserved (and therefore invalid) resource type.
337  */
338 const UINT8                 AcpiGbl_ResourceAmlSizes[] =
339 {
340     /* Small descriptors */
341
342     0,
343     0,
344     0,
345     0,
346     ACPI_AML_SIZE_SMALL (AML_RESOURCE_IRQ),
347     ACPI_AML_SIZE_SMALL (AML_RESOURCE_DMA),
348     ACPI_AML_SIZE_SMALL (AML_RESOURCE_START_DEPENDENT),
349     ACPI_AML_SIZE_SMALL (AML_RESOURCE_END_DEPENDENT),
350     ACPI_AML_SIZE_SMALL (AML_RESOURCE_IO),
351     ACPI_AML_SIZE_SMALL (AML_RESOURCE_FIXED_IO),
352     ACPI_AML_SIZE_SMALL (AML_RESOURCE_FIXED_DMA),
353     0,
354     0,
355     0,
356     ACPI_AML_SIZE_SMALL (AML_RESOURCE_VENDOR_SMALL),
357     ACPI_AML_SIZE_SMALL (AML_RESOURCE_END_TAG),
358
359     /* Large descriptors */
360
361     0,
362     ACPI_AML_SIZE_LARGE (AML_RESOURCE_MEMORY24),
363     ACPI_AML_SIZE_LARGE (AML_RESOURCE_GENERIC_REGISTER),
364     0,
365     ACPI_AML_SIZE_LARGE (AML_RESOURCE_VENDOR_LARGE),
366     ACPI_AML_SIZE_LARGE (AML_RESOURCE_MEMORY32),
367     ACPI_AML_SIZE_LARGE (AML_RESOURCE_FIXED_MEMORY32),
368     ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS32),
369     ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS16),
370     ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_IRQ),
371     ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS64),
372     ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_ADDRESS64),
373     ACPI_AML_SIZE_LARGE (AML_RESOURCE_GPIO),
374     0,
375     ACPI_AML_SIZE_LARGE (AML_RESOURCE_COMMON_SERIALBUS),
376 };
377
378 const UINT8                 AcpiGbl_ResourceAmlSerialBusSizes[] =
379 {
380     0,
381     ACPI_AML_SIZE_LARGE (AML_RESOURCE_I2C_SERIALBUS),
382     ACPI_AML_SIZE_LARGE (AML_RESOURCE_SPI_SERIALBUS),
383     ACPI_AML_SIZE_LARGE (AML_RESOURCE_UART_SERIALBUS),
384 };
385
386
387 /*
388  * Resource types, used to validate the resource length field.
389  * The length of fixed-length types must match exactly, variable
390  * lengths must meet the minimum required length, etc.
391  * Zero indicates a reserved (and therefore invalid) resource type.
392  */
393 static const UINT8          AcpiGbl_ResourceTypes[] =
394 {
395     /* Small descriptors */
396
397     0,
398     0,
399     0,
400     0,
401     ACPI_SMALL_VARIABLE_LENGTH,     /* 04 IRQ */
402     ACPI_FIXED_LENGTH,              /* 05 DMA */
403     ACPI_SMALL_VARIABLE_LENGTH,     /* 06 StartDependentFunctions */
404     ACPI_FIXED_LENGTH,              /* 07 EndDependentFunctions */
405     ACPI_FIXED_LENGTH,              /* 08 IO */
406     ACPI_FIXED_LENGTH,              /* 09 FixedIO */
407     ACPI_FIXED_LENGTH,              /* 0A FixedDMA */
408     0,
409     0,
410     0,
411     ACPI_VARIABLE_LENGTH,           /* 0E VendorShort */
412     ACPI_FIXED_LENGTH,              /* 0F EndTag */
413
414     /* Large descriptors */
415
416     0,
417     ACPI_FIXED_LENGTH,              /* 01 Memory24 */
418     ACPI_FIXED_LENGTH,              /* 02 GenericRegister */
419     0,
420     ACPI_VARIABLE_LENGTH,           /* 04 VendorLong */
421     ACPI_FIXED_LENGTH,              /* 05 Memory32 */
422     ACPI_FIXED_LENGTH,              /* 06 Memory32Fixed */
423     ACPI_VARIABLE_LENGTH,           /* 07 Dword* address */
424     ACPI_VARIABLE_LENGTH,           /* 08 Word* address */
425     ACPI_VARIABLE_LENGTH,           /* 09 ExtendedIRQ */
426     ACPI_VARIABLE_LENGTH,           /* 0A Qword* address */
427     ACPI_FIXED_LENGTH,              /* 0B Extended* address */
428     ACPI_VARIABLE_LENGTH,           /* 0C Gpio* */
429     0,
430     ACPI_VARIABLE_LENGTH            /* 0E *SerialBus */
431 };
432
433
434 /*******************************************************************************
435  *
436  * FUNCTION:    AcpiUtWalkAmlResources
437  *
438  * PARAMETERS:  WalkState           - Current walk info
439  * PARAMETERS:  Aml                 - Pointer to the raw AML resource template
440  *              AmlLength           - Length of the entire template
441  *              UserFunction        - Called once for each descriptor found. If
442  *                                    NULL, a pointer to the EndTag is returned
443  *              Context             - Passed to UserFunction
444  *
445  * RETURN:      Status
446  *
447  * DESCRIPTION: Walk a raw AML resource list(buffer). User function called
448  *              once for each resource found.
449  *
450  ******************************************************************************/
451
452 ACPI_STATUS
453 AcpiUtWalkAmlResources (
454     ACPI_WALK_STATE         *WalkState,
455     UINT8                   *Aml,
456     ACPI_SIZE               AmlLength,
457     ACPI_WALK_AML_CALLBACK  UserFunction,
458     void                    **Context)
459 {
460     ACPI_STATUS             Status;
461     UINT8                   *EndAml;
462     UINT8                   ResourceIndex;
463     UINT32                  Length;
464     UINT32                  Offset = 0;
465     UINT8                   EndTag[2] = {0x79, 0x00};
466
467
468     ACPI_FUNCTION_TRACE (UtWalkAmlResources);
469
470
471     /* The absolute minimum resource template is one EndTag descriptor */
472
473     if (AmlLength < sizeof (AML_RESOURCE_END_TAG))
474     {
475         return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
476     }
477
478     /* Point to the end of the resource template buffer */
479
480     EndAml = Aml + AmlLength;
481
482     /* Walk the byte list, abort on any invalid descriptor type or length */
483
484     while (Aml < EndAml)
485     {
486         /* Validate the Resource Type and Resource Length */
487
488         Status = AcpiUtValidateResource (WalkState, Aml, &ResourceIndex);
489         if (ACPI_FAILURE (Status))
490         {
491             /*
492              * Exit on failure. Cannot continue because the descriptor
493              * length may be bogus also.
494              */
495             return_ACPI_STATUS (Status);
496         }
497
498         /* Get the length of this descriptor */
499
500         Length = AcpiUtGetDescriptorLength (Aml);
501
502         /* Invoke the user function */
503
504         if (UserFunction)
505         {
506             Status = UserFunction (
507                 Aml, Length, Offset, ResourceIndex, Context);
508             if (ACPI_FAILURE (Status))
509             {
510                 return_ACPI_STATUS (Status);
511             }
512         }
513
514         /* An EndTag descriptor terminates this resource template */
515
516         if (AcpiUtGetResourceType (Aml) == ACPI_RESOURCE_NAME_END_TAG)
517         {
518             /*
519              * There must be at least one more byte in the buffer for
520              * the 2nd byte of the EndTag
521              */
522             if ((Aml + 1) >= EndAml)
523             {
524                 return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
525             }
526
527             /* Return the pointer to the EndTag if requested */
528
529             if (!UserFunction)
530             {
531                 *Context = Aml;
532             }
533
534             /* Normal exit */
535
536             return_ACPI_STATUS (AE_OK);
537         }
538
539         Aml += Length;
540         Offset += Length;
541     }
542
543     /* Did not find an EndTag descriptor */
544
545     if (UserFunction)
546     {
547         /* Insert an EndTag anyway. AcpiRsGetListLength always leaves room */
548
549         (void) AcpiUtValidateResource (WalkState, EndTag, &ResourceIndex);
550         Status = UserFunction (EndTag, 2, Offset, ResourceIndex, Context);
551         if (ACPI_FAILURE (Status))
552         {
553             return_ACPI_STATUS (Status);
554         }
555     }
556
557     return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
558 }
559
560
561 /*******************************************************************************
562  *
563  * FUNCTION:    AcpiUtValidateResource
564  *
565  * PARAMETERS:  WalkState           - Current walk info
566  *              Aml                 - Pointer to the raw AML resource descriptor
567  *              ReturnIndex         - Where the resource index is returned. NULL
568  *                                    if the index is not required.
569  *
570  * RETURN:      Status, and optionally the Index into the global resource tables
571  *
572  * DESCRIPTION: Validate an AML resource descriptor by checking the Resource
573  *              Type and Resource Length. Returns an index into the global
574  *              resource information/dispatch tables for later use.
575  *
576  ******************************************************************************/
577
578 ACPI_STATUS
579 AcpiUtValidateResource (
580     ACPI_WALK_STATE         *WalkState,
581     void                    *Aml,
582     UINT8                   *ReturnIndex)
583 {
584     AML_RESOURCE            *AmlResource;
585     UINT8                   ResourceType;
586     UINT8                   ResourceIndex;
587     ACPI_RS_LENGTH          ResourceLength;
588     ACPI_RS_LENGTH          MinimumResourceLength;
589
590
591     ACPI_FUNCTION_ENTRY ();
592
593
594     /*
595      * 1) Validate the ResourceType field (Byte 0)
596      */
597     ResourceType = ACPI_GET8 (Aml);
598     if (ReturnIndex)
599     {
600         *ReturnIndex = 0;       /* silence bogus gcc warning */
601     }
602
603     /*
604      * Byte 0 contains the descriptor name (Resource Type)
605      * Examine the large/small bit in the resource header
606      */
607     if (ResourceType & ACPI_RESOURCE_NAME_LARGE)
608     {
609         /* Verify the large resource type (name) against the max */
610
611         if (ResourceType > ACPI_RESOURCE_NAME_LARGE_MAX)
612         {
613             goto InvalidResource;
614         }
615
616         /*
617          * Large Resource Type -- bits 6:0 contain the name
618          * Translate range 0x80-0x8B to index range 0x10-0x1B
619          */
620         ResourceIndex = (UINT8) (ResourceType - 0x70);
621     }
622     else
623     {
624         /*
625          * Small Resource Type -- bits 6:3 contain the name
626          * Shift range to index range 0x00-0x0F
627          */
628         ResourceIndex = (UINT8)
629             ((ResourceType & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3);
630     }
631
632     /*
633      * Check validity of the resource type, via AcpiGbl_ResourceTypes.
634      * Zero indicates an invalid resource.
635      */
636     if (!AcpiGbl_ResourceTypes[ResourceIndex])
637     {
638         goto InvalidResource;
639     }
640
641     /*
642      * Validate the ResourceLength field. This ensures that the length
643      * is at least reasonable, and guarantees that it is non-zero.
644      */
645     ResourceLength = AcpiUtGetResourceLength (Aml);
646     MinimumResourceLength = AcpiGbl_ResourceAmlSizes[ResourceIndex];
647
648     /* Validate based upon the type of resource - fixed length or variable */
649
650     switch (AcpiGbl_ResourceTypes[ResourceIndex])
651     {
652     case ACPI_FIXED_LENGTH:
653
654         /* Fixed length resource, length must match exactly */
655
656         if (ResourceLength != MinimumResourceLength)
657         {
658             goto BadResourceLength;
659         }
660         break;
661
662     case ACPI_VARIABLE_LENGTH:
663
664         /* Variable length resource, length must be at least the minimum */
665
666         if (ResourceLength < MinimumResourceLength)
667         {
668             goto BadResourceLength;
669         }
670         break;
671
672     case ACPI_SMALL_VARIABLE_LENGTH:
673
674         /* Small variable length resource, length can be (Min) or (Min-1) */
675
676         if ((ResourceLength > MinimumResourceLength) ||
677             (ResourceLength < (MinimumResourceLength - 1)))
678         {
679             goto BadResourceLength;
680         }
681         break;
682
683     default:
684
685         /* Shouldn't happen (because of validation earlier), but be sure */
686
687         goto InvalidResource;
688     }
689
690     AmlResource = ACPI_CAST_PTR (AML_RESOURCE, Aml);
691     if (ResourceType == ACPI_RESOURCE_NAME_SERIAL_BUS)
692     {
693         /* Validate the BusType field */
694
695         if ((AmlResource->CommonSerialBus.Type == 0) ||
696             (AmlResource->CommonSerialBus.Type > AML_RESOURCE_MAX_SERIALBUSTYPE))
697         {
698             if (WalkState)
699             {
700                 ACPI_ERROR ((AE_INFO,
701                     "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X",
702                     AmlResource->CommonSerialBus.Type));
703             }
704             return (AE_AML_INVALID_RESOURCE_TYPE);
705         }
706     }
707
708     /* Optionally return the resource table index */
709
710     if (ReturnIndex)
711     {
712         *ReturnIndex = ResourceIndex;
713     }
714
715     return (AE_OK);
716
717
718 InvalidResource:
719
720     if (WalkState)
721     {
722         ACPI_ERROR ((AE_INFO,
723             "Invalid/unsupported resource descriptor: Type 0x%2.2X",
724             ResourceType));
725     }
726     return (AE_AML_INVALID_RESOURCE_TYPE);
727
728 BadResourceLength:
729
730     if (WalkState)
731     {
732         ACPI_ERROR ((AE_INFO,
733             "Invalid resource descriptor length: Type "
734             "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X",
735             ResourceType, ResourceLength, MinimumResourceLength));
736     }
737     return (AE_AML_BAD_RESOURCE_LENGTH);
738 }
739
740
741 /*******************************************************************************
742  *
743  * FUNCTION:    AcpiUtGetResourceType
744  *
745  * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
746  *
747  * RETURN:      The Resource Type with no extraneous bits (except the
748  *              Large/Small descriptor bit -- this is left alone)
749  *
750  * DESCRIPTION: Extract the Resource Type/Name from the first byte of
751  *              a resource descriptor.
752  *
753  ******************************************************************************/
754
755 UINT8
756 AcpiUtGetResourceType (
757     void                    *Aml)
758 {
759     ACPI_FUNCTION_ENTRY ();
760
761
762     /*
763      * Byte 0 contains the descriptor name (Resource Type)
764      * Examine the large/small bit in the resource header
765      */
766     if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE)
767     {
768         /* Large Resource Type -- bits 6:0 contain the name */
769
770         return (ACPI_GET8 (Aml));
771     }
772     else
773     {
774         /* Small Resource Type -- bits 6:3 contain the name */
775
776         return ((UINT8) (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_SMALL_MASK));
777     }
778 }
779
780
781 /*******************************************************************************
782  *
783  * FUNCTION:    AcpiUtGetResourceLength
784  *
785  * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
786  *
787  * RETURN:      Byte Length
788  *
789  * DESCRIPTION: Get the "Resource Length" of a raw AML descriptor. By
790  *              definition, this does not include the size of the descriptor
791  *              header or the length field itself.
792  *
793  ******************************************************************************/
794
795 UINT16
796 AcpiUtGetResourceLength (
797     void                    *Aml)
798 {
799     ACPI_RS_LENGTH          ResourceLength;
800
801
802     ACPI_FUNCTION_ENTRY ();
803
804
805     /*
806      * Byte 0 contains the descriptor name (Resource Type)
807      * Examine the large/small bit in the resource header
808      */
809     if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE)
810     {
811         /* Large Resource type -- bytes 1-2 contain the 16-bit length */
812
813         ACPI_MOVE_16_TO_16 (&ResourceLength, ACPI_ADD_PTR (UINT8, Aml, 1));
814
815     }
816     else
817     {
818         /* Small Resource type -- bits 2:0 of byte 0 contain the length */
819
820         ResourceLength = (UINT16) (ACPI_GET8 (Aml) &
821             ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK);
822     }
823
824     return (ResourceLength);
825 }
826
827
828 /*******************************************************************************
829  *
830  * FUNCTION:    AcpiUtGetResourceHeaderLength
831  *
832  * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
833  *
834  * RETURN:      Length of the AML header (depends on large/small descriptor)
835  *
836  * DESCRIPTION: Get the length of the header for this resource.
837  *
838  ******************************************************************************/
839
840 UINT8
841 AcpiUtGetResourceHeaderLength (
842     void                    *Aml)
843 {
844     ACPI_FUNCTION_ENTRY ();
845
846
847     /* Examine the large/small bit in the resource header */
848
849     if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE)
850     {
851         return (sizeof (AML_RESOURCE_LARGE_HEADER));
852     }
853     else
854     {
855         return (sizeof (AML_RESOURCE_SMALL_HEADER));
856     }
857 }
858
859
860 /*******************************************************************************
861  *
862  * FUNCTION:    AcpiUtGetDescriptorLength
863  *
864  * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
865  *
866  * RETURN:      Byte length
867  *
868  * DESCRIPTION: Get the total byte length of a raw AML descriptor, including the
869  *              length of the descriptor header and the length field itself.
870  *              Used to walk descriptor lists.
871  *
872  ******************************************************************************/
873
874 UINT32
875 AcpiUtGetDescriptorLength (
876     void                    *Aml)
877 {
878     ACPI_FUNCTION_ENTRY ();
879
880
881     /*
882      * Get the Resource Length (does not include header length) and add
883      * the header length (depends on if this is a small or large resource)
884      */
885     return (AcpiUtGetResourceLength (Aml) +
886         AcpiUtGetResourceHeaderLength (Aml));
887 }
888
889
890 /*******************************************************************************
891  *
892  * FUNCTION:    AcpiUtGetResourceEndTag
893  *
894  * PARAMETERS:  ObjDesc         - The resource template buffer object
895  *              EndTag          - Where the pointer to the EndTag is returned
896  *
897  * RETURN:      Status, pointer to the end tag
898  *
899  * DESCRIPTION: Find the EndTag resource descriptor in an AML resource template
900  *              Note: allows a buffer length of zero.
901  *
902  ******************************************************************************/
903
904 ACPI_STATUS
905 AcpiUtGetResourceEndTag (
906     ACPI_OPERAND_OBJECT     *ObjDesc,
907     UINT8                   **EndTag)
908 {
909     ACPI_STATUS             Status;
910
911
912     ACPI_FUNCTION_TRACE (UtGetResourceEndTag);
913
914
915     /* Allow a buffer length of zero */
916
917     if (!ObjDesc->Buffer.Length)
918     {
919         *EndTag = ObjDesc->Buffer.Pointer;
920         return_ACPI_STATUS (AE_OK);
921     }
922
923     /* Validate the template and get a pointer to the EndTag */
924
925     Status = AcpiUtWalkAmlResources (NULL, ObjDesc->Buffer.Pointer,
926         ObjDesc->Buffer.Length, NULL, (void **) EndTag);
927
928     return_ACPI_STATUS (Status);
929 }