bridge(4): document net.link.bridge.pfil_onlyip
[dragonfly.git] / sys / dev / netif / ath / ath_hal / ar9002 / ar9285_btcoex.c
1 /*
2  * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
3  * Copyright (c) 2002-2005 Atheros Communications, Inc.
4  * Copyright (c) 2008-2010, Atheros Communications Inc.
5  *
6  * Permission to use, copy, modify, and/or distribute this software for any
7  * purpose with or without fee is hereby granted, provided that the above
8  * copyright notice and this permission notice appear in all copies.
9  *
10  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
11  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
12  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
13  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
14  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
15  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
16  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17  *
18  * $FreeBSD$
19  */
20
21 #include "opt_ah.h"
22
23 #include "ah.h"
24 #include "ah_internal.h"
25 #include "ah_devid.h"
26 #ifdef AH_DEBUG
27 #include "ah_desc.h"                /* NB: for HAL_PHYERR* */
28 #endif
29
30 #include "ar5416/ar5416.h"
31 #include "ar5416/ar5416reg.h"
32 #include "ar5416/ar5416phy.h"
33 #include "ar5416/ar5416desc.h" /* AR5416_CONTTXMODE */
34
35 #include "ar9002/ar9285phy.h"
36 #include "ar9002/ar9285.h"
37
38 /*
39  * This is specific to Kite.
40  *
41  * Kiwi and others don't have antenna diversity like this.
42  */
43 void
44 ar9285BTCoexAntennaDiversity(struct ath_hal *ah)
45 {
46         struct ath_hal_5416 *ahp = AH5416(ah);
47         u_int32_t regVal;
48         u_int8_t ant_div_control1, ant_div_control2;
49
50         HALDEBUG(ah, HAL_DEBUG_BT_COEX,
51             "%s: btCoexFlag: ALLOW=%d, ENABLE=%d\n",
52             __func__,
53             !! (ahp->ah_btCoexFlag & HAL_BT_COEX_FLAG_ANT_DIV_ALLOW),
54             !! (ahp->ah_btCoexFlag & HAL_BT_COEX_FLAG_ANT_DIV_ENABLE));
55
56         /* NOTE: disparate enum comparison must be cast */
57         if ((ahp->ah_btCoexFlag & HAL_BT_COEX_FLAG_ANT_DIV_ALLOW) ||
58             ((int)AH5212(ah)->ah_diversity != HAL_ANT_VARIABLE)) {
59         if ((ahp->ah_btCoexFlag & HAL_BT_COEX_FLAG_ANT_DIV_ENABLE) &&
60              (AH5212(ah)->ah_antControl == HAL_ANT_VARIABLE)) {
61                 /* Enable antenna diversity */
62                 ant_div_control1 = HAL_BT_COEX_ANTDIV_CONTROL1_ENABLE;
63                 ant_div_control2 = HAL_BT_COEX_ANTDIV_CONTROL2_ENABLE;
64
65                 /* Don't disable BT ant to allow BB to control SWCOM */
66                 ahp->ah_btCoexMode2 &= (~(AR_BT_DISABLE_BT_ANT));
67                 OS_REG_WRITE(ah, AR_BT_COEX_MODE2, ahp->ah_btCoexMode2);
68
69                 /* Program the correct SWCOM table */
70                 OS_REG_WRITE(ah, AR_PHY_SWITCH_COM,
71                     HAL_BT_COEX_ANT_DIV_SWITCH_COM);
72                 OS_REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000);
73         } else if (AH5212(ah)->ah_antControl == HAL_ANT_FIXED_B) {
74                 /* Disable antenna diversity. Use antenna B(LNA2) only. */
75                 ant_div_control1 = HAL_BT_COEX_ANTDIV_CONTROL1_FIXED_B;
76                 ant_div_control2 = HAL_BT_COEX_ANTDIV_CONTROL2_FIXED_B;
77
78                 /* Disable BT ant to allow concurrent BT and WLAN receive */
79                 ahp->ah_btCoexMode2 |= AR_BT_DISABLE_BT_ANT;
80                 OS_REG_WRITE(ah, AR_BT_COEX_MODE2, ahp->ah_btCoexMode2);
81
82                 /*
83                  * Program SWCOM table to make sure RF switch always parks
84                  * at WLAN side
85                  */
86                 OS_REG_WRITE(ah, AR_PHY_SWITCH_COM,
87                     HAL_BT_COEX_ANT_DIV_SWITCH_COM);
88                 OS_REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0x60000000, 0xf0000000);
89         } else {
90                 /* Disable antenna diversity. Use antenna A(LNA1) only */
91                 ant_div_control1 = HAL_BT_COEX_ANTDIV_CONTROL1_FIXED_A;
92                 ant_div_control2 = HAL_BT_COEX_ANTDIV_CONTROL2_FIXED_A;
93
94                 /* Disable BT ant to allow concurrent BT and WLAN receive */
95                 ahp->ah_btCoexMode2 |= AR_BT_DISABLE_BT_ANT;
96                 OS_REG_WRITE(ah, AR_BT_COEX_MODE2, ahp->ah_btCoexMode2);
97
98                 /*
99                  * Program SWCOM table to make sure RF switch always
100                  * parks at BT side
101                  */
102                 OS_REG_WRITE(ah, AR_PHY_SWITCH_COM, 0);
103                 OS_REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000);
104         }
105
106         regVal = OS_REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL);
107         regVal &= (~(AR_PHY_9285_ANT_DIV_CTL_ALL));
108         /*
109          * Clear ant_fast_div_bias [14:9] since for Janus the main LNA is
110          * always LNA1.
111          */
112         regVal &= (~(AR_PHY_9285_FAST_DIV_BIAS));
113
114         regVal |= SM(ant_div_control1, AR_PHY_9285_ANT_DIV_CTL);
115         regVal |= SM(ant_div_control2, AR_PHY_9285_ANT_DIV_ALT_LNACONF);
116         regVal |= SM((ant_div_control2 >> 2), AR_PHY_9285_ANT_DIV_MAIN_LNACONF);
117         regVal |= SM((ant_div_control1 >> 1), AR_PHY_9285_ANT_DIV_ALT_GAINTB);
118         regVal |= SM((ant_div_control1 >> 2), AR_PHY_9285_ANT_DIV_MAIN_GAINTB);
119         OS_REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regVal);
120
121         regVal = OS_REG_READ(ah, AR_PHY_CCK_DETECT);
122         regVal &= (~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
123         regVal |= SM((ant_div_control1 >> 3),
124             AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
125         OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, regVal);
126     }
127 }
128
129 void
130 ar9285BTCoexSetParameter(struct ath_hal *ah, u_int32_t type, u_int32_t value)
131 {
132         struct ath_hal_5416 *ahp = AH5416(ah);
133
134         switch (type) {
135         case HAL_BT_COEX_ANTENNA_DIVERSITY:
136                 if (AR_SREV_KITE(ah)) {
137                         ahp->ah_btCoexFlag |= HAL_BT_COEX_FLAG_ANT_DIV_ALLOW;
138                         if (value)
139                                 ahp->ah_btCoexFlag |=
140                                     HAL_BT_COEX_FLAG_ANT_DIV_ENABLE;
141                         else
142                                 ahp->ah_btCoexFlag &=
143                                     ~HAL_BT_COEX_FLAG_ANT_DIV_ENABLE;
144                         ar9285BTCoexAntennaDiversity(ah);
145                 }
146                 break;
147         default:
148                 ar5416BTCoexSetParameter(ah, type, value);
149                 break;
150         }
151 }
152
153