sys/dev/raid/dpt/dpt_scsi.c

   1 /*
   2  *       Copyright (c) 1997 by Simon Shapiro
   3  *       All Rights Reserved
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  * 1. Redistributions of source code must retain the above copyright
   9  *    notice, this list of conditions, and the following disclaimer,
  10  *    without modification, immediately at the beginning of the file.
  11  * 2. Redistributions in binary form must reproduce the above copyright
  12  *    notice, this list of conditions and the following disclaimer in the
  13  *    documentation and/or other materials provided with the distribution.
  14  * 3. The name of the author may not be used to endorse or promote products
  15  *    derived from this software without specific prior written permission.
  16  *
  17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  20  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
  21  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  27  * SUCH DAMAGE.
  28  *
  29  * $FreeBSD: src/sys/dev/dpt/dpt_scsi.c,v 1.28.2.3 2003/01/31 02:47:10 grog Exp $
  30  */
  31
  32 /*
  33  * dpt_scsi.c: SCSI dependant code for the DPT driver
  34  *
  35  * credits:     Assisted by Mike Neuffer in the early low level DPT code
  36  *              Thanx to Mark Salyzyn of DPT for his assistance.
  37  *              Special thanx to Justin Gibbs for invaluable help in
  38  *              making this driver look and work like a FreeBSD component.
  39  *              Last but not least, many thanx to UCB and the FreeBSD
  40  *              team for creating and maintaining such a wonderful O/S.
  41  *
  42  * TODO:     * Add ISA probe code.
  43  *           * Add driver-level RAID-0. This will allow interoperability with
  44  *             NiceTry, M$-Doze, Win-Dog, Slowlaris, etc., in recognizing RAID
  45  *             arrays that span controllers (Wow!).
  46  */
  47
  48 #define _DPT_C_
  49
  50 #include "opt_dpt.h"
  51 #include <sys/param.h>
  52 #include <sys/systm.h>
  53 #include <sys/eventhandler.h>
  54 #include <sys/malloc.h>
  55 #include <sys/kernel.h>
  56 #include <sys/bus.h>
  57 #include <sys/thread2.h>
  58
  59 #include <machine/clock.h>
  60
  61 #include <bus/cam/cam.h>
  62 #include <bus/cam/cam_ccb.h>
  63 #include <bus/cam/cam_sim.h>
  64 #include <bus/cam/cam_xpt_sim.h>
  65 #include <bus/cam/cam_debug.h>
  66 #include <bus/cam/scsi/scsi_all.h>
  67 #include <bus/cam/scsi/scsi_message.h>
  68
  69 #include <vm/vm.h>
  70 #include <vm/pmap.h>
  71
  72 #include "dpt.h"
  73
  74 /* dpt_isa.c and dpt_pci.c need this in a central place */
  75 int dpt_controllers_present;
  76
  77 u_long  dpt_unit;       /* Next unit number to use */
  78
  79 /* The linked list of softc structures */
  80 struct dpt_softc_list dpt_softcs = TAILQ_HEAD_INITIALIZER(dpt_softcs);
  81
  82 #define microtime_now dpt_time_now()
  83
  84 #define dpt_inl(dpt, port)                              \
  85         bus_space_read_4((dpt)->tag, (dpt)->bsh, port)
  86 #define dpt_inb(dpt, port)                              \
  87         bus_space_read_1((dpt)->tag, (dpt)->bsh, port)
  88 #define dpt_outl(dpt, port, value)                      \
  89         bus_space_write_4((dpt)->tag, (dpt)->bsh, port, value)
  90 #define dpt_outb(dpt, port, value)                      \
  91         bus_space_write_1((dpt)->tag, (dpt)->bsh, port, value)
  92
  93 /*
  94  * These will have to be setup by parameters passed at boot/load time. For
  95  * perfromance reasons, we make them constants for the time being.
  96  */
  97 #define dpt_min_segs    DPT_MAX_SEGS
  98 #define dpt_max_segs    DPT_MAX_SEGS
  99
 100 /* Definitions for our use of the SIM private CCB area */
 101 #define ccb_dccb_ptr spriv_ptr0
 102 #define ccb_dpt_ptr spriv_ptr1
 103
 104 /* ================= Private Inline Function declarations ===================*/
 105 static __inline int             dpt_just_reset(dpt_softc_t * dpt);
 106 static __inline int             dpt_raid_busy(dpt_softc_t * dpt);
 107 static __inline int             dpt_pio_wait (u_int32_t, u_int, u_int, u_int);
 108 static __inline int             dpt_wait(dpt_softc_t *dpt, u_int bits,
 109                                          u_int state);
 110 static __inline struct dpt_ccb* dptgetccb(struct dpt_softc *dpt);
 111 static __inline void            dptfreeccb(struct dpt_softc *dpt,
 112                                            struct dpt_ccb *dccb);
 113 static __inline bus_addr_t      dptccbvtop(struct dpt_softc *dpt,
 114                                            struct dpt_ccb *dccb);
 115
 116 static __inline int             dpt_send_immediate(dpt_softc_t *dpt,
 117                                                    eata_ccb_t *cmd_block,
 118                                                    u_int32_t cmd_busaddr,
 119                                                    u_int retries,
 120                                                    u_int ifc, u_int code,
 121                                                    u_int code2);
 122
 123 /* ==================== Private Function declarations =======================*/
 124 static void             dptmapmem(void *arg, bus_dma_segment_t *segs,
 125                                   int nseg, int error);
 126
 127 static struct sg_map_node*
 128                         dptallocsgmap(struct dpt_softc *dpt);
 129
 130 static int              dptallocccbs(dpt_softc_t *dpt);
 131
 132 static int              dpt_get_conf(dpt_softc_t *dpt, dpt_ccb_t *dccb,
 133                                      u_int32_t dccb_busaddr, u_int size,
 134                                      u_int page, u_int target, int extent);
 135 static void             dpt_detect_cache(dpt_softc_t *dpt, dpt_ccb_t *dccb,
 136                                          u_int32_t dccb_busaddr,
 137                                          u_int8_t *buff);
 138
 139 static void             dpt_poll(struct cam_sim *sim);
 140
 141 static void             dptexecuteccb(void *arg, bus_dma_segment_t *dm_segs,
 142                                       int nseg, int error);
 143
 144 static void             dpt_action(struct cam_sim *sim, union ccb *ccb);
 145
 146 static int              dpt_send_eata_command(dpt_softc_t *dpt, eata_ccb_t *cmd,
 147                                               u_int32_t cmd_busaddr,
 148                                               u_int command, u_int retries,
 149                                               u_int ifc, u_int code,
 150                                               u_int code2);
 151 static void             dptprocesserror(dpt_softc_t *dpt, dpt_ccb_t *dccb,
 152                                         union ccb *ccb, u_int hba_stat,
 153                                         u_int scsi_stat, u_int32_t resid);
 154
 155 static void             dpttimeout(void *arg);
 156 static void             dptshutdown(void *arg, int howto);
 157
 158 /* ================= Private Inline Function definitions ====================*/
 159 static __inline int
 160 dpt_just_reset(dpt_softc_t * dpt)
 161 {
 162         if ((dpt_inb(dpt, 2) == 'D')
 163          && (dpt_inb(dpt, 3) == 'P')
 164          && (dpt_inb(dpt, 4) == 'T')
 165          && (dpt_inb(dpt, 5) == 'H'))
 166                 return (1);
 167         else
 168                 return (0);
 169 }
 170
 171 static __inline int
 172 dpt_raid_busy(dpt_softc_t * dpt)
 173 {
 174         if ((dpt_inb(dpt, 0) == 'D')
 175          && (dpt_inb(dpt, 1) == 'P')
 176          && (dpt_inb(dpt, 2) == 'T'))
 177                 return (1);
 178         else
 179                 return (0);
 180 }
 181
 182 static __inline int
 183 dpt_pio_wait (u_int32_t base, u_int reg, u_int bits, u_int state)
 184 {
 185         int   i;
 186         u_int c;
 187
 188         for (i = 0; i < 20000; i++) {   /* wait 20ms for not busy */
 189                 c = inb(base + reg) & bits;
 190                 if (!(c == state))
 191                         return (0);
 192                 else
 193                         DELAY(50);
 194         }
 195         return (-1);
 196 }
 197
 198 static __inline int
 199 dpt_wait(dpt_softc_t *dpt, u_int bits, u_int state)
 200 {
 201         int   i;
 202         u_int c;
 203
 204         for (i = 0; i < 20000; i++) {   /* wait 20ms for not busy */
 205                 c = dpt_inb(dpt, HA_RSTATUS) & bits;
 206                 if (c == state)
 207                         return (0);
 208                 else
 209                         DELAY(50);
 210         }
 211         return (-1);
 212 }
 213
 214 static __inline struct dpt_ccb*
 215 dptgetccb(struct dpt_softc *dpt)
 216 {
 217         struct  dpt_ccb* dccb;
 218
 219         crit_enter();
 220         if ((dccb = SLIST_FIRST(&dpt->free_dccb_list)) != NULL) {
 221                 SLIST_REMOVE_HEAD(&dpt->free_dccb_list, links);
 222                 dpt->free_dccbs--;
 223         } else if (dpt->total_dccbs < dpt->max_dccbs) {
 224                 dptallocccbs(dpt);
 225                 dccb = SLIST_FIRST(&dpt->free_dccb_list);
 226                 if (dccb == NULL)
 227                         kprintf("dpt%d: Can't malloc DCCB\n", dpt->unit);
 228                 else {
 229                         SLIST_REMOVE_HEAD(&dpt->free_dccb_list, links);
 230                         dpt->free_dccbs--;
 231                 }
 232         }
 233         crit_exit();
 234
 235         return (dccb);
 236 }
 237
 238 static __inline void
 239 dptfreeccb(struct dpt_softc *dpt, struct dpt_ccb *dccb)
 240 {
 241         crit_enter();
 242         if ((dccb->state & DCCB_ACTIVE) != 0)
 243                 LIST_REMOVE(&dccb->ccb->ccb_h, sim_links.le);
 244         if ((dccb->state & DCCB_RELEASE_SIMQ) != 0)
 245                 dccb->ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
 246         else if (dpt->resource_shortage != 0
 247          && (dccb->ccb->ccb_h.status & CAM_RELEASE_SIMQ) == 0) {
 248                 dccb->ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
 249                 dpt->resource_shortage = FALSE;
 250         }
 251         dccb->state = DCCB_FREE;
 252         SLIST_INSERT_HEAD(&dpt->free_dccb_list, dccb, links);
 253         ++dpt->free_dccbs;
 254         crit_exit();
 255 }
 256
 257 static __inline bus_addr_t
 258 dptccbvtop(struct dpt_softc *dpt, struct dpt_ccb *dccb)
 259 {
 260         return (dpt->dpt_ccb_busbase
 261               + (u_int32_t)((caddr_t)dccb - (caddr_t)dpt->dpt_dccbs));
 262 }
 263
 264 static __inline struct dpt_ccb *
 265 dptccbptov(struct dpt_softc *dpt, bus_addr_t busaddr)
 266 {
 267         return (dpt->dpt_dccbs
 268              +  ((struct dpt_ccb *)busaddr
 269                - (struct dpt_ccb *)dpt->dpt_ccb_busbase));
 270 }
 271
 272 /*
 273  * Send a command for immediate execution by the DPT
 274  * See above function for IMPORTANT notes.
 275  */
 276 static __inline int
 277 dpt_send_immediate(dpt_softc_t *dpt, eata_ccb_t *cmd_block,
 278                    u_int32_t cmd_busaddr, u_int retries,
 279                    u_int ifc, u_int code, u_int code2)
 280 {
 281         return (dpt_send_eata_command(dpt, cmd_block, cmd_busaddr,
 282                                       EATA_CMD_IMMEDIATE, retries, ifc,
 283                                       code, code2));
 284 }
 285
 286
 287 /* ===================== Private Function definitions =======================*/
 288 static void
 289 dptmapmem(void *arg, bus_dma_segment_t *segs, int nseg, int error)
 290 {
 291         bus_addr_t *busaddrp;
 292
 293         busaddrp = (bus_addr_t *)arg;
 294         *busaddrp = segs->ds_addr;
 295 }
 296
 297 static struct sg_map_node *
 298 dptallocsgmap(struct dpt_softc *dpt)
 299 {
 300         struct sg_map_node *sg_map;
 301
 302         sg_map = kmalloc(sizeof(*sg_map), M_DEVBUF, M_INTWAIT);
 303
 304         /* Allocate S/G space for the next batch of CCBS */
 305         if (bus_dmamem_alloc(dpt->sg_dmat, (void *)&sg_map->sg_vaddr,
 306                              BUS_DMA_NOWAIT, &sg_map->sg_dmamap) != 0) {
 307                 kfree(sg_map, M_DEVBUF);
 308                 return (NULL);
 309         }
 310
 311         (void)bus_dmamap_load(dpt->sg_dmat, sg_map->sg_dmamap, sg_map->sg_vaddr,
 312                               PAGE_SIZE, dptmapmem, &sg_map->sg_physaddr,
 313                               /*flags*/0);
 314
 315         SLIST_INSERT_HEAD(&dpt->sg_maps, sg_map, links);
 316
 317         return (sg_map);
 318 }
 319
 320 /*
 321  * Allocate another chunk of CCB's. Return count of entries added.
 322  * Assumed to be called at splcam().
 323  */
 324 static int
 325 dptallocccbs(dpt_softc_t *dpt)
 326 {
 327         struct dpt_ccb *next_ccb;
 328         struct sg_map_node *sg_map;
 329         bus_addr_t physaddr;
 330         dpt_sg_t *segs;
 331         int newcount;
 332         int i;
 333
 334         next_ccb = &dpt->dpt_dccbs[dpt->total_dccbs];
 335
 336         if (next_ccb == dpt->dpt_dccbs) {
 337                 /*
 338                  * First time through.  Re-use the S/G
 339                  * space we allocated for initialization
 340                  * CCBS.
 341                  */
 342                 sg_map = SLIST_FIRST(&dpt->sg_maps);
 343         } else {
 344                 sg_map = dptallocsgmap(dpt);
 345         }
 346
 347         if (sg_map == NULL)
 348                 return (0);
 349
 350         segs = sg_map->sg_vaddr;
 351         physaddr = sg_map->sg_physaddr;
 352
 353         newcount = (PAGE_SIZE / (dpt->sgsize * sizeof(dpt_sg_t)));
 354         for (i = 0; dpt->total_dccbs < dpt->max_dccbs && i < newcount; i++) {
 355                 int error;
 356
 357                 error = bus_dmamap_create(dpt->buffer_dmat, /*flags*/0,
 358                                           &next_ccb->dmamap);
 359                 if (error != 0)
 360                         break;
 361                 next_ccb->sg_list = segs;
 362                 next_ccb->sg_busaddr = htonl(physaddr);
 363                 next_ccb->eata_ccb.cp_dataDMA = htonl(physaddr);
 364                 next_ccb->eata_ccb.cp_statDMA = htonl(dpt->sp_physaddr);
 365                 next_ccb->eata_ccb.cp_reqDMA =
 366                     htonl(dptccbvtop(dpt, next_ccb)
 367                         + offsetof(struct dpt_ccb, sense_data));
 368                 next_ccb->eata_ccb.cp_busaddr = dpt->dpt_ccb_busend;
 369                 next_ccb->state = DCCB_FREE;
 370                 next_ccb->tag = dpt->total_dccbs;
 371                 SLIST_INSERT_HEAD(&dpt->free_dccb_list, next_ccb, links);
 372                 segs += dpt->sgsize;
 373                 physaddr += (dpt->sgsize * sizeof(dpt_sg_t));
 374                 dpt->dpt_ccb_busend += sizeof(*next_ccb);
 375                 next_ccb++;
 376                 dpt->total_dccbs++;
 377         }
 378         return (i);
 379 }
 380
 381 dpt_conf_t *
 382 dpt_pio_get_conf (u_int32_t base)
 383 {
 384         static dpt_conf_t *     conf;
 385         u_int16_t *             p;
 386         int                     i;
 387
 388         /*
 389          * Allocate a dpt_conf_t
 390          */
 391         if (conf == NULL)
 392                 conf = kmalloc(sizeof(dpt_conf_t), M_DEVBUF, M_INTWAIT);
 393
 394         /*
 395          * If we have one, clean it up.
 396          */
 397         bzero(conf, sizeof(dpt_conf_t));
 398
 399         /*
 400          * Reset the controller.
 401          */
 402         outb((base + HA_WCOMMAND), EATA_CMD_RESET);
 403
 404         /*
 405          * Wait for the controller to become ready.
 406          * For some reason there can be -no- delays after calling reset
 407          * before we wait on ready status.
 408          */
 409         if (dpt_pio_wait(base, HA_RSTATUS, HA_SBUSY, 0)) {
 410                 kprintf("dpt: timeout waiting for controller to become ready\n");
 411                 return (NULL);
 412         }
 413
 414         if (dpt_pio_wait(base, HA_RAUXSTAT, HA_ABUSY, 0)) {
 415                 kprintf("dpt: timetout waiting for adapter ready.\n");
 416                 return (NULL);
 417         }
 418
 419         /*
 420          * Send the PIO_READ_CONFIG command.
 421          */
 422         outb((base + HA_WCOMMAND), EATA_CMD_PIO_READ_CONFIG);
 423
 424         /*
 425          * Read the data into the struct.
 426          */
 427         p = (u_int16_t *)conf;
 428         for (i = 0; i < (sizeof(dpt_conf_t) / 2); i++) {
 429
 430                 if (dpt_pio_wait(base, HA_RSTATUS, HA_SDRQ, 0)) {
 431                         kprintf("dpt: timeout in data read.\n");
 432                         return (NULL);
 433                 }
 434
 435                 (*p) = inw(base + HA_RDATA);
 436                 p++;
 437         }
 438
 439         if (inb(base + HA_RSTATUS) & HA_SERROR) {
 440                 kprintf("dpt: error reading configuration data.\n");
 441                 return (NULL);
 442         }
 443
 444 #define BE_EATA_SIGNATURE       0x45415441
 445 #define LE_EATA_SIGNATURE       0x41544145
 446
 447         /*
 448          * Test to see if we have a valid card.
 449          */
 450         if ((conf->signature == BE_EATA_SIGNATURE) ||
 451             (conf->signature == LE_EATA_SIGNATURE)) {
 452
 453                 while (inb(base + HA_RSTATUS) & HA_SDRQ) {
 454                         inw(base + HA_RDATA);
 455                 }
 456
 457                 return (conf);
 458         }
 459         return (NULL);
 460 }
 461
 462 /*
 463  * Read a configuration page into the supplied dpt_cont_t buffer.
 464  */
 465 static int
 466 dpt_get_conf(dpt_softc_t *dpt, dpt_ccb_t *dccb, u_int32_t dccb_busaddr,
 467              u_int size, u_int page, u_int target, int extent)
 468 {
 469         eata_ccb_t *cp;
 470
 471         u_int8_t   status;
 472
 473         int        ndx;
 474         int        result;
 475
 476         cp = &dccb->eata_ccb;
 477         bzero((void *)(uintptr_t)(volatile void *)dpt->sp, sizeof(*dpt->sp));
 478
 479         cp->Interpret = 1;
 480         cp->DataIn = 1;
 481         cp->Auto_Req_Sen = 1;
 482         cp->reqlen = sizeof(struct scsi_sense_data);
 483
 484         cp->cp_id = target;
 485         cp->cp_LUN = 0;         /* In the EATA packet */
 486         cp->cp_lun = 0;         /* In the SCSI command */
 487
 488         cp->cp_scsi_cmd = INQUIRY;
 489         cp->cp_len = size;
 490
 491         cp->cp_extent = extent;
 492
 493         cp->cp_page = page;
 494         cp->cp_channel = 0;     /* DNC, Interpret mode is set */
 495         cp->cp_identify = 1;
 496         cp->cp_datalen = htonl(size);
 497
 498         crit_enter();
 499
 500         /*
 501          * This could be a simple for loop, but we suspected the compiler To
 502          * have optimized it a bit too much. Wait for the controller to
 503          * become ready
 504          */
 505         while (((status = dpt_inb(dpt, HA_RSTATUS)) != (HA_SREADY | HA_SSC)
 506              && (status != (HA_SREADY | HA_SSC | HA_SERROR))
 507              && (status != (HA_SDRDY | HA_SERROR | HA_SDRQ)))
 508             || (dpt_wait(dpt, HA_SBUSY, 0))) {
 509
 510                 /*
 511                  * RAID Drives still Spinning up? (This should only occur if
 512                  * the DPT controller is in a NON PC (PCI?) platform).
 513                  */
 514                 if (dpt_raid_busy(dpt)) {
 515                         kprintf("dpt%d WARNING: Get_conf() RSUS failed.\n",
 516                                dpt->unit);
 517                         crit_exit();
 518                         return (0);
 519                 }
 520         }
 521
 522         DptStat_Reset_BUSY(dpt->sp);
 523
 524         /*
 525          * XXXX We might want to do something more clever than aborting at
 526          * this point, like resetting (rebooting) the controller and trying
 527          * again.
 528          */
 529         if ((result = dpt_send_eata_command(dpt, cp, dccb_busaddr,
 530                                             EATA_CMD_DMA_SEND_CP,
 531                                             10000, 0, 0, 0)) != 0) {
 532                 kprintf("dpt%d WARNING: Get_conf() failed (%d) to send "
 533                        "EATA_CMD_DMA_READ_CONFIG\n",
 534                        dpt->unit, result);
 535                 crit_exit();
 536                 return (0);
 537         }
 538         /* Wait for two seconds for a response.  This can be slow  */
 539         for (ndx = 0;
 540              (ndx < 20000)
 541              && !((status = dpt_inb(dpt, HA_RAUXSTAT)) & HA_AIRQ);
 542              ndx++) {
 543                 DELAY(50);
 544         }
 545
 546         /* Grab the status and clear interrupts */
 547         status = dpt_inb(dpt, HA_RSTATUS);
 548
 549         crit_exit();
 550
 551         /*
 552          * Check the status carefully.  Return only if the
 553          * command was successful.
 554          */
 555         if (((status & HA_SERROR) == 0)
 556          && (dpt->sp->hba_stat == 0)
 557          && (dpt->sp->scsi_stat == 0)
 558          && (dpt->sp->residue_len == 0))
 559                 return (0);
 560
 561         if (dpt->sp->scsi_stat == SCSI_STATUS_CHECK_COND)
 562                 return (0);
 563
 564         return (1);
 565 }
 566
 567 /* Detect Cache parameters and size */
 568 static void
 569 dpt_detect_cache(dpt_softc_t *dpt, dpt_ccb_t *dccb, u_int32_t dccb_busaddr,
 570                  u_int8_t *buff)
 571 {
 572         eata_ccb_t *cp;
 573         u_int8_t   *param;
 574         int         bytes;
 575         int         result;
 576         int         ndx;
 577         u_int8_t    status;
 578
 579         /*
 580          * Default setting, for best perfromance..
 581          * This is what virtually all cards default to..
 582          */
 583         dpt->cache_type = DPT_CACHE_WRITEBACK;
 584         dpt->cache_size = 0;
 585
 586         cp = &dccb->eata_ccb;
 587         bzero((void *)(uintptr_t)(volatile void *)dpt->sp, sizeof(dpt->sp));
 588         bzero(buff, 512);
 589
 590         /* Setup the command structure */
 591         cp->Interpret = 1;
 592         cp->DataIn = 1;
 593         cp->Auto_Req_Sen = 1;
 594         cp->reqlen = sizeof(struct scsi_sense_data);
 595
 596         cp->cp_id = 0;          /* who cares?  The HBA will interpret.. */
 597         cp->cp_LUN = 0;         /* In the EATA packet */
 598         cp->cp_lun = 0;         /* In the SCSI command */
 599         cp->cp_channel = 0;
 600
 601         cp->cp_scsi_cmd = EATA_CMD_DMA_SEND_CP;
 602         cp->cp_len = 56;
 603
 604         cp->cp_extent = 0;
 605         cp->cp_page = 0;
 606         cp->cp_identify = 1;
 607         cp->cp_dispri = 1;
 608
 609         /*
 610          * Build the EATA Command Packet structure
 611          * for a Log Sense Command.
 612          */
 613         cp->cp_cdb[0] = 0x4d;
 614         cp->cp_cdb[1] = 0x0;
 615         cp->cp_cdb[2] = 0x40 | 0x33;
 616         cp->cp_cdb[7] = 1;
 617
 618         cp->cp_datalen = htonl(512);
 619
 620         crit_enter();
 621         result = dpt_send_eata_command(dpt, cp, dccb_busaddr,
 622                                        EATA_CMD_DMA_SEND_CP,
 623                                        10000, 0, 0, 0);
 624         if (result != 0) {
 625                 kprintf("dpt%d WARNING: detect_cache() failed (%d) to send "
 626                        "EATA_CMD_DMA_SEND_CP\n", dpt->unit, result);
 627                 crit_exit();
 628                 return;
 629         }
 630         /* Wait for two seconds for a response.  This can be slow... */
 631         for (ndx = 0;
 632              (ndx < 20000) &&
 633              !((status = dpt_inb(dpt, HA_RAUXSTAT)) & HA_AIRQ);
 634              ndx++) {
 635                 DELAY(50);
 636         }
 637
 638         /* Grab the status and clear interrupts */
 639         status = dpt_inb(dpt, HA_RSTATUS);
 640         crit_exit();
 641
 642         /*
 643          * Sanity check
 644          */
 645         if (buff[0] != 0x33) {
 646                 return;
 647         }
 648         bytes = DPT_HCP_LENGTH(buff);
 649         param = DPT_HCP_FIRST(buff);
 650
 651         if (DPT_HCP_CODE(param) != 1) {
 652                 /*
 653                  * DPT Log Page layout error
 654                  */
 655                 kprintf("dpt%d: NOTICE: Log Page (1) layout error\n",
 656                        dpt->unit);
 657                 return;
 658         }
 659         if (!(param[4] & 0x4)) {
 660                 dpt->cache_type = DPT_NO_CACHE;
 661                 return;
 662         }
 663         while (DPT_HCP_CODE(param) != 6) {
 664                 param = DPT_HCP_NEXT(param);
 665                 if ((param < buff)
 666                  || (param >= &buff[bytes])) {
 667                         return;
 668                 }
 669         }
 670
 671         if (param[4] & 0x2) {
 672                 /*
 673                  * Cache disabled
 674                  */
 675                 dpt->cache_type = DPT_NO_CACHE;
 676                 return;
 677         }
 678
 679         if (param[4] & 0x4) {
 680                 dpt->cache_type = DPT_CACHE_WRITETHROUGH;
 681         }
 682
 683         /* XXX This isn't correct.  This log parameter only has two bytes.... */
 684 #if 0
 685         dpt->cache_size = param[5]
 686                         | (param[6] << 8)
 687                         | (param[7] << 16)
 688                         | (param[8] << 24);
 689 #endif
 690 }
 691
 692 static void
 693 dpt_poll(struct cam_sim *sim)
 694 {
 695         dpt_intr(cam_sim_softc(sim));
 696 }
 697
 698 static void
 699 dptexecuteccb(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
 700 {
 701         struct   dpt_ccb *dccb;
 702         union    ccb *ccb;
 703         struct   dpt_softc *dpt;
 704
 705         dccb = (struct dpt_ccb *)arg;
 706         ccb = dccb->ccb;
 707         dpt = (struct dpt_softc *)ccb->ccb_h.ccb_dpt_ptr;
 708
 709         if (error != 0) {
 710                 if (error != EFBIG)
 711                         kprintf("dpt%d: Unexpected error 0x%x returned from "
 712                                "bus_dmamap_load\n", dpt->unit, error);
 713                 if (ccb->ccb_h.status == CAM_REQ_INPROG) {
 714                         xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
 715                         ccb->ccb_h.status = CAM_REQ_TOO_BIG|CAM_DEV_QFRZN;
 716                 }
 717                 dptfreeccb(dpt, dccb);
 718                 xpt_done(ccb);
 719                 return;
 720         }
 721
 722         if (nseg != 0) {
 723                 dpt_sg_t *sg;
 724                 bus_dma_segment_t *end_seg;
 725                 bus_dmasync_op_t op;
 726
 727                 end_seg = dm_segs + nseg;
 728
 729                 /* Copy the segments into our SG list */
 730                 sg = dccb->sg_list;
 731                 while (dm_segs < end_seg) {
 732                         sg->seg_len = htonl(dm_segs->ds_len);
 733                         sg->seg_addr = htonl(dm_segs->ds_addr);
 734                         sg++;
 735                         dm_segs++;
 736                 }
 737
 738                 if (nseg > 1) {
 739                         dccb->eata_ccb.scatter = 1;
 740                         dccb->eata_ccb.cp_dataDMA = dccb->sg_busaddr;
 741                         dccb->eata_ccb.cp_datalen =
 742                             htonl(nseg * sizeof(dpt_sg_t));
 743                 } else {
 744                         dccb->eata_ccb.cp_dataDMA = dccb->sg_list[0].seg_addr;
 745                         dccb->eata_ccb.cp_datalen = dccb->sg_list[0].seg_len;
 746                 }
 747
 748                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
 749                         op = BUS_DMASYNC_PREREAD;
 750                 else
 751                         op = BUS_DMASYNC_PREWRITE;
 752
 753                 bus_dmamap_sync(dpt->buffer_dmat, dccb->dmamap, op);
 754
 755         } else {
 756                 dccb->eata_ccb.cp_dataDMA = 0;
 757                 dccb->eata_ccb.cp_datalen = 0;
 758         }
 759
 760         crit_enter();
 761
 762         /*
 763          * Last time we need to check if this CCB needs to
 764          * be aborted.
 765          */
 766         if (ccb->ccb_h.status != CAM_REQ_INPROG) {
 767                 if (nseg != 0)
 768                         bus_dmamap_unload(dpt->buffer_dmat, dccb->dmamap);
 769                 dptfreeccb(dpt, dccb);
 770                 xpt_done(ccb);
 771                 crit_exit();
 772                 return;
 773         }
 774
 775         dccb->state |= DCCB_ACTIVE;
 776         ccb->ccb_h.status |= CAM_SIM_QUEUED;
 777         LIST_INSERT_HEAD(&dpt->pending_ccb_list, &ccb->ccb_h, sim_links.le);
 778         callout_reset(&ccb->ccb_h.timeout_ch, (ccb->ccb_h.timeout * hz) / 1000,
 779                       dpttimeout, dccb);
 780         if (dpt_send_eata_command(dpt, &dccb->eata_ccb,
 781                                   dccb->eata_ccb.cp_busaddr,
 782                                   EATA_CMD_DMA_SEND_CP, 0, 0, 0, 0) != 0) {
 783                 ccb->ccb_h.status = CAM_NO_HBA; /* HBA dead or just busy?? */
 784                 if (nseg != 0)
 785                         bus_dmamap_unload(dpt->buffer_dmat, dccb->dmamap);
 786                 dptfreeccb(dpt, dccb);
 787                 xpt_done(ccb);
 788         }
 789
 790         crit_exit();
 791 }
 792
 793 static void
 794 dpt_action(struct cam_sim *sim, union ccb *ccb)
 795 {
 796         struct    dpt_softc *dpt;
 797
 798         CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("dpt_action\n"));
 799
 800         dpt = (struct dpt_softc *)cam_sim_softc(sim);
 801
 802         if ((dpt->state & DPT_HA_SHUTDOWN_ACTIVE) != 0) {
 803                 xpt_print_path(ccb->ccb_h.path);
 804                 kprintf("controller is shutdown. Aborting CCB.\n");
 805                 ccb->ccb_h.status = CAM_NO_HBA;
 806                 xpt_done(ccb);
 807                 return;
 808         }
 809
 810         switch (ccb->ccb_h.func_code) {
 811         /* Common cases first */
 812         case XPT_SCSI_IO:       /* Execute the requested I/O operation */
 813         {
 814                 struct  ccb_scsiio *csio;
 815                 struct  ccb_hdr *ccbh;
 816                 struct  dpt_ccb *dccb;
 817                 struct  eata_ccb *eccb;
 818
 819                 csio = &ccb->csio;
 820                 ccbh = &ccb->ccb_h;
 821                 /* Max CDB length is 12 bytes */
 822                 if (csio->cdb_len > 12) {
 823                         ccb->ccb_h.status = CAM_REQ_INVALID;
 824                         xpt_done(ccb);
 825                         return;
 826                 }
 827                 if ((dccb = dptgetccb(dpt)) == NULL) {
 828                         crit_enter();
 829                         dpt->resource_shortage = 1;
 830                         crit_exit();
 831                         xpt_freeze_simq(sim, /*count*/1);
 832                         ccb->ccb_h.status = CAM_REQUEUE_REQ;
 833                         xpt_done(ccb);
 834                         return;
 835                 }
 836                 eccb = &dccb->eata_ccb;
 837
 838                 /* Link dccb and ccb so we can find one from the other */
 839                 dccb->ccb = ccb;
 840                 ccb->ccb_h.ccb_dccb_ptr = dccb;
 841                 ccb->ccb_h.ccb_dpt_ptr = dpt;
 842
 843                 /*
 844                  * Explicitly set all flags so that the compiler can
 845                  * be smart about setting them.
 846                  */
 847                 eccb->SCSI_Reset = 0;
 848                 eccb->HBA_Init = 0;
 849                 eccb->Auto_Req_Sen = (ccb->ccb_h.flags & CAM_DIS_AUTOSENSE)
 850                                    ? 0 : 1;
 851                 eccb->scatter = 0;
 852                 eccb->Quick = 0;
 853                 eccb->Interpret =
 854                     ccb->ccb_h.target_id == dpt->hostid[cam_sim_bus(sim)]
 855                     ? 1 : 0;
 856                 eccb->DataOut = (ccb->ccb_h.flags & CAM_DIR_OUT) ? 1 : 0;
 857                 eccb->DataIn = (ccb->ccb_h.flags & CAM_DIR_IN) ? 1 : 0;
 858                 eccb->reqlen = csio->sense_len;
 859                 eccb->cp_id = ccb->ccb_h.target_id;
 860                 eccb->cp_channel = cam_sim_bus(sim);
 861                 eccb->cp_LUN = ccb->ccb_h.target_lun;
 862                 eccb->cp_luntar = 0;
 863                 eccb->cp_dispri = (ccb->ccb_h.flags & CAM_DIS_DISCONNECT)
 864                                 ? 0 : 1;
 865                 eccb->cp_identify = 1;
 866
 867                 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0
 868                  && csio->tag_action != CAM_TAG_ACTION_NONE) {
 869                         eccb->cp_msg[0] = csio->tag_action;
 870                         eccb->cp_msg[1] = dccb->tag;
 871                 } else {
 872                         eccb->cp_msg[0] = 0;
 873                         eccb->cp_msg[1] = 0;
 874                 }
 875                 eccb->cp_msg[2] = 0;
 876
 877                 if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
 878                         if ((ccb->ccb_h.flags & CAM_CDB_PHYS) == 0) {
 879                                 bcopy(csio->cdb_io.cdb_ptr,
 880                                       eccb->cp_cdb, csio->cdb_len);
 881                         } else {
 882                                 /* I guess I could map it in... */
 883                                 ccb->ccb_h.status = CAM_REQ_INVALID;
 884                                 dptfreeccb(dpt, dccb);
 885                                 xpt_done(ccb);
 886                                 return;
 887                         }
 888                 } else {
 889                         bcopy(csio->cdb_io.cdb_bytes,
 890                               eccb->cp_cdb, csio->cdb_len);
 891                 }
 892                 /*
 893                  * If we have any data to send with this command,
 894                  * map it into bus space.
 895                  */
 896                 /* Only use S/G if there is a transfer */
 897                 if ((ccbh->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
 898                         if ((ccbh->flags & CAM_SCATTER_VALID) == 0) {
 899                                 /*
 900                                  * We've been given a pointer
 901                                  * to a single buffer.
 902                                  */
 903                                 if ((ccbh->flags & CAM_DATA_PHYS) == 0) {
 904                                         int error;
 905
 906                                         crit_enter();
 907                                         error =
 908                                             bus_dmamap_load(dpt->buffer_dmat,
 909                                                             dccb->dmamap,
 910                                                             csio->data_ptr,
 911                                                             csio->dxfer_len,
 912                                                             dptexecuteccb,
 913                                                             dccb, /*flags*/0);
 914                                         if (error == EINPROGRESS) {
 915                                                 /*
 916                                                  * So as to maintain ordering,
 917                                                  * freeze the controller queue
 918                                                  * until our mapping is
 919                                                  * returned.
 920                                                  */
 921                                                 xpt_freeze_simq(sim, 1);
 922                                                 dccb->state |= CAM_RELEASE_SIMQ;
 923                                         }
 924                                         crit_exit();
 925                                 } else {
 926                                         struct bus_dma_segment seg;
 927
 928                                         /* Pointer to physical buffer */
 929                                         seg.ds_addr =
 930                                             (bus_addr_t)csio->data_ptr;
 931                                         seg.ds_len = csio->dxfer_len;
 932                                         dptexecuteccb(dccb, &seg, 1, 0);
 933                                 }
 934                         } else {
 935                                 struct bus_dma_segment *segs;
 936
 937                                 if ((ccbh->flags & CAM_DATA_PHYS) != 0)
 938                                         panic("dpt_action - Physical "
 939                                               "segment pointers "
 940                                               "unsupported");
 941
 942                                 if ((ccbh->flags&CAM_SG_LIST_PHYS)==0)
 943                                         panic("dpt_action - Virtual "
 944                                               "segment addresses "
 945                                               "unsupported");
 946
 947                                 /* Just use the segments provided */
 948                                 segs = (struct bus_dma_segment *)csio->data_ptr;
 949                                 dptexecuteccb(dccb, segs, csio->sglist_cnt, 0);
 950                         }
 951                 } else {
 952                         /*
 953                          * XXX JGibbs.
 954                          * Does it want them both on or both off?
 955                          * CAM_DIR_NONE is both on, so this code can
 956                          * be removed if this is also what the DPT
 957                          * exptects.
 958                          */
 959                         eccb->DataOut = 0;
 960                         eccb->DataIn = 0;
 961                         dptexecuteccb(dccb, NULL, 0, 0);
 962                 }
 963                 break;
 964         }
 965         case XPT_RESET_DEV:     /* Bus Device Reset the specified SCSI device */
 966         case XPT_ABORT:                 /* Abort the specified CCB */
 967                 /* XXX Implement */
 968                 ccb->ccb_h.status = CAM_REQ_INVALID;
 969                 xpt_done(ccb);
 970                 break;
 971         case XPT_SET_TRAN_SETTINGS:
 972         {
 973                 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
 974                 xpt_done(ccb);
 975                 break;
 976         }
 977         case XPT_GET_TRAN_SETTINGS:
 978         /* Get default/user set transfer settings for the target */
 979         {
 980                 struct  ccb_trans_settings *cts = &ccb->cts;
 981                 struct ccb_trans_settings_scsi *scsi =
 982                     &cts->proto_specific.scsi;
 983                 struct ccb_trans_settings_spi *spi =
 984                     &cts->xport_specific.spi;
 985
 986                 cts->protocol = PROTO_SCSI;
 987                 cts->protocol_version = SCSI_REV_2;
 988                 cts->transport = XPORT_SPI;
 989                 cts->transport_version = 2;
 990
 991                 if (cts->type == CTS_TYPE_USER_SETTINGS) {
 992                         spi->flags = CTS_SPI_FLAGS_DISC_ENB;
 993                         spi->bus_width = (dpt->max_id > 7)
 994                                        ? MSG_EXT_WDTR_BUS_8_BIT
 995                                        : MSG_EXT_WDTR_BUS_16_BIT;
 996                         spi->sync_period = 25; /* 10MHz */
 997                         if (spi->sync_period != 0)
 998                                 spi->sync_offset = 15;
 999                         scsi->flags = CTS_SCSI_FLAGS_TAG_ENB;
1000
1001                         spi->valid = CTS_SPI_VALID_SYNC_RATE
1002                                 | CTS_SPI_VALID_SYNC_OFFSET
1003                                 | CTS_SPI_VALID_BUS_WIDTH
1004                                 | CTS_SPI_VALID_DISC;
1005                         scsi->valid = CTS_SCSI_VALID_TQ;
1006                         ccb->ccb_h.status = CAM_REQ_CMP;
1007                 } else {
1008                         ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
1009                 }
1010                 xpt_done(ccb);
1011                 break;
1012         }
1013         case XPT_CALC_GEOMETRY:
1014         {
1015                 struct    ccb_calc_geometry *ccg;
1016                 u_int32_t size_mb;
1017                 u_int32_t secs_per_cylinder;
1018                 int       extended;
1019
1020                 /*
1021                  * XXX Use Adaptec translation until I find out how to
1022                  *     get this information from the card.
1023                  */
1024                 ccg = &ccb->ccg;
1025                 size_mb = ccg->volume_size
1026                         / ((1024L * 1024L) / ccg->block_size);
1027                 extended = 1;
1028
1029                 if (size_mb > 1024 && extended) {
1030                         ccg->heads = 255;
1031                         ccg->secs_per_track = 63;
1032                 } else {
1033                         ccg->heads = 64;
1034                         ccg->secs_per_track = 32;
1035                 }
1036                 secs_per_cylinder = ccg->heads * ccg->secs_per_track;
1037                 ccg->cylinders = ccg->volume_size / secs_per_cylinder;
1038                 ccb->ccb_h.status = CAM_REQ_CMP;
1039                 xpt_done(ccb);
1040                 break;
1041         }
1042         case XPT_RESET_BUS:             /* Reset the specified SCSI bus */
1043         {
1044                 /* XXX Implement */
1045                 ccb->ccb_h.status = CAM_REQ_CMP;
1046                 xpt_done(ccb);
1047                 break;
1048         }
1049         case XPT_TERM_IO:               /* Terminate the I/O process */
1050                 /* XXX Implement */
1051                 ccb->ccb_h.status = CAM_REQ_INVALID;
1052                 xpt_done(ccb);
1053                 break;
1054         case XPT_PATH_INQ:              /* Path routing inquiry */
1055         {
1056                 struct ccb_pathinq *cpi = &ccb->cpi;
1057
1058                 cpi->version_num = 1;
1059                 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE;
1060                 if (dpt->max_id > 7)
1061                         cpi->hba_inquiry |= PI_WIDE_16;
1062                 cpi->target_sprt = 0;
1063                 cpi->hba_misc = 0;
1064                 cpi->hba_eng_cnt = 0;
1065                 cpi->max_target = dpt->max_id;
1066                 cpi->max_lun = dpt->max_lun;
1067                 cpi->initiator_id = dpt->hostid[cam_sim_bus(sim)];
1068                 cpi->bus_id = cam_sim_bus(sim);
1069                 cpi->base_transfer_speed = 3300;
1070                 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
1071                 strncpy(cpi->hba_vid, "DPT", HBA_IDLEN);
1072                 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
1073                 cpi->unit_number = cam_sim_unit(sim);
1074                 cpi->transport = XPORT_SPI;
1075                 cpi->transport_version = 2;
1076                 cpi->protocol = PROTO_SCSI;
1077                 cpi->protocol_version = SCSI_REV_2;
1078                 cpi->ccb_h.status = CAM_REQ_CMP;
1079                 xpt_done(ccb);
1080                 break;
1081         }
1082         default:
1083                 ccb->ccb_h.status = CAM_REQ_INVALID;
1084                 xpt_done(ccb);
1085                 break;
1086         }
1087 }
1088
1089 /*
1090  * This routine will try to send an EATA command to the DPT HBA.
1091  * It will, by default, try 20,000 times, waiting 50us between tries.
1092  * It returns 0 on success and 1 on failure.
1093  * It is assumed to be called at splcam().
1094  */
1095 static int
1096 dpt_send_eata_command(dpt_softc_t *dpt, eata_ccb_t *cmd_block,
1097                       u_int32_t cmd_busaddr, u_int command, u_int retries,
1098                       u_int ifc, u_int code, u_int code2)
1099 {
1100         u_int   loop;
1101
1102         if (!retries)
1103                 retries = 20000;
1104
1105         /*
1106          * I hate this polling nonsense. Wish there was a way to tell the DPT
1107          * to go get commands at its own pace,  or to interrupt when ready.
1108          * In the mean time we will measure how many itterations it really
1109          * takes.
1110          */
1111         for (loop = 0; loop < retries; loop++) {
1112                 if ((dpt_inb(dpt, HA_RAUXSTAT) & HA_ABUSY) == 0)
1113                         break;
1114                 else
1115                         DELAY(50);
1116         }
1117
1118         if (loop < retries) {
1119 #ifdef DPT_MEASURE_PERFORMANCE
1120                 if (loop > dpt->performance.max_eata_tries)
1121                         dpt->performance.max_eata_tries = loop;
1122
1123                 if (loop < dpt->performance.min_eata_tries)
1124                         dpt->performance.min_eata_tries = loop;
1125 #endif
1126         } else {
1127 #ifdef DPT_MEASURE_PERFORMANCE
1128                 ++dpt->performance.command_too_busy;
1129 #endif
1130                 return (1);
1131         }
1132
1133         /* The controller is alive, advance the wedge timer */
1134 #ifdef DPT_RESET_HBA
1135         dpt->last_contact = microtime_now;
1136 #endif
1137
1138         if (cmd_block == NULL)
1139                 cmd_busaddr = 0;
1140 #if (BYTE_ORDER == BIG_ENDIAN)
1141         else {
1142                 cmd_busaddr = ((cmd_busaddr >> 24) & 0xFF)
1143                             | ((cmd_busaddr >> 16) & 0xFF)
1144                             | ((cmd_busaddr >> 8) & 0xFF)
1145                             | (cmd_busaddr & 0xFF);
1146         }
1147 #endif
1148         /* And now the address */
1149         dpt_outl(dpt, HA_WDMAADDR, cmd_busaddr);
1150
1151         if (command == EATA_CMD_IMMEDIATE) {
1152                 if (cmd_block == NULL) {
1153                         dpt_outb(dpt, HA_WCODE2, code2);
1154                         dpt_outb(dpt, HA_WCODE, code);
1155                 }
1156                 dpt_outb(dpt, HA_WIFC, ifc);
1157         }
1158         dpt_outb(dpt, HA_WCOMMAND, command);
1159
1160         return (0);
1161 }
1162
1163
1164 /* ==================== Exported Function definitions =======================*/
1165 dpt_softc_t *
1166 dpt_alloc(device_t dev, bus_space_tag_t tag, bus_space_handle_t bsh)
1167 {
1168         dpt_softc_t     *dpt = device_get_softc(dev);
1169         int    i;
1170
1171         bzero(dpt, sizeof(dpt_softc_t));
1172         dpt->tag = tag;
1173         dpt->bsh = bsh;
1174         dpt->unit = device_get_unit(dev);
1175         SLIST_INIT(&dpt->free_dccb_list);
1176         LIST_INIT(&dpt->pending_ccb_list);
1177         TAILQ_INSERT_TAIL(&dpt_softcs, dpt, links);
1178         for (i = 0; i < MAX_CHANNELS; i++)
1179                 dpt->resetlevel[i] = DPT_HA_OK;
1180
1181 #ifdef DPT_MEASURE_PERFORMANCE
1182         dpt_reset_performance(dpt);
1183 #endif /* DPT_MEASURE_PERFORMANCE */
1184         return (dpt);
1185 }
1186
1187 void
1188 dpt_free(struct dpt_softc *dpt)
1189 {
1190         switch (dpt->init_level) {
1191         default:
1192         case 5:
1193                 bus_dmamap_unload(dpt->dccb_dmat, dpt->dccb_dmamap);
1194         case 4:
1195                 bus_dmamem_free(dpt->dccb_dmat, dpt->dpt_dccbs,
1196                                 dpt->dccb_dmamap);
1197                 bus_dmamap_destroy(dpt->dccb_dmat, dpt->dccb_dmamap);
1198         case 3:
1199                 bus_dma_tag_destroy(dpt->dccb_dmat);
1200         case 2:
1201                 bus_dma_tag_destroy(dpt->buffer_dmat);
1202         case 1:
1203         {
1204                 struct sg_map_node *sg_map;
1205
1206                 while ((sg_map = SLIST_FIRST(&dpt->sg_maps)) != NULL) {
1207                         SLIST_REMOVE_HEAD(&dpt->sg_maps, links);
1208                         bus_dmamap_unload(dpt->sg_dmat,
1209                                           sg_map->sg_dmamap);
1210                         bus_dmamem_free(dpt->sg_dmat, sg_map->sg_vaddr,
1211                                         sg_map->sg_dmamap);
1212                         kfree(sg_map, M_DEVBUF);
1213                 }
1214                 bus_dma_tag_destroy(dpt->sg_dmat);
1215         }
1216         case 0:
1217                 break;
1218         }
1219         TAILQ_REMOVE(&dpt_softcs, dpt, links);
1220 }
1221
1222 static u_int8_t string_sizes[] =
1223 {
1224         sizeof(((dpt_inq_t*)NULL)->vendor),
1225         sizeof(((dpt_inq_t*)NULL)->modelNum),
1226         sizeof(((dpt_inq_t*)NULL)->firmware),
1227         sizeof(((dpt_inq_t*)NULL)->protocol),
1228 };
1229
1230 int
1231 dpt_init(struct dpt_softc *dpt)
1232 {
1233         dpt_conf_t  conf;
1234         struct      sg_map_node *sg_map;
1235         dpt_ccb_t  *dccb;
1236         u_int8_t   *strp;
1237         int         index;
1238         int         i;
1239         int         retval;
1240
1241         dpt->init_level = 0;
1242         SLIST_INIT(&dpt->sg_maps);
1243
1244 #ifdef DPT_RESET_BOARD
1245         kprintf("dpt%d: resetting HBA\n", dpt->unit);
1246         dpt_outb(dpt, HA_WCOMMAND, EATA_CMD_RESET);
1247         DELAY(750000);
1248         /* XXX Shouldn't we poll a status register or something??? */
1249 #endif
1250         /* DMA tag for our S/G structures.  We allocate in page sized chunks */
1251         if (bus_dma_tag_create(dpt->parent_dmat, /*alignment*/1, /*boundary*/0,
1252                                /*lowaddr*/BUS_SPACE_MAXADDR,
1253                                /*highaddr*/BUS_SPACE_MAXADDR,
1254                                /*filter*/NULL, /*filterarg*/NULL,
1255                                PAGE_SIZE, /*nsegments*/1,
1256                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
1257                                /*flags*/0, &dpt->sg_dmat) != 0) {
1258                 goto error_exit;
1259         }
1260
1261         dpt->init_level++;
1262
1263         /*
1264          * We allocate our DPT ccbs as a contiguous array of bus dma'able
1265          * memory.  To get the allocation size, we need to know how many
1266          * ccbs the card supports.  This requires a ccb.  We solve this
1267          * chicken and egg problem by allocating some re-usable S/G space
1268          * up front, and treating it as our status packet, CCB, and target
1269          * memory space for these commands.
1270          */
1271         sg_map = dptallocsgmap(dpt);
1272         if (sg_map == NULL)
1273                 goto error_exit;
1274
1275         dpt->sp = (volatile dpt_sp_t *)sg_map->sg_vaddr;
1276         dccb = (struct dpt_ccb *)(uintptr_t)(volatile void *)&dpt->sp[1];
1277         bzero(dccb, sizeof(*dccb));
1278         dpt->sp_physaddr = sg_map->sg_physaddr;
1279         dccb->eata_ccb.cp_dataDMA =
1280             htonl(sg_map->sg_physaddr + sizeof(dpt_sp_t) + sizeof(*dccb));
1281         dccb->eata_ccb.cp_busaddr = ~0;
1282         dccb->eata_ccb.cp_statDMA = htonl(dpt->sp_physaddr);
1283         dccb->eata_ccb.cp_reqDMA = htonl(dpt->sp_physaddr + sizeof(*dccb)
1284                                        + offsetof(struct dpt_ccb, sense_data));
1285
1286         /* Okay.  Fetch our config */
1287         bzero(&dccb[1], sizeof(conf)); /* data area */
1288         retval = dpt_get_conf(dpt, dccb, sg_map->sg_physaddr + sizeof(dpt_sp_t),
1289                               sizeof(conf), 0xc1, 7, 1);
1290
1291         if (retval != 0) {
1292                 kprintf("dpt%d: Failed to get board configuration\n", dpt->unit);
1293                 return (retval);
1294         }
1295         bcopy(&dccb[1], &conf, sizeof(conf));
1296
1297         bzero(&dccb[1], sizeof(dpt->board_data));
1298         retval = dpt_get_conf(dpt, dccb, sg_map->sg_physaddr + sizeof(dpt_sp_t),
1299                               sizeof(dpt->board_data), 0, conf.scsi_id0, 0);
1300         if (retval != 0) {
1301                 kprintf("dpt%d: Failed to get inquiry information\n", dpt->unit);
1302                 return (retval);
1303         }
1304         bcopy(&dccb[1], &dpt->board_data, sizeof(dpt->board_data));
1305
1306         dpt_detect_cache(dpt, dccb, sg_map->sg_physaddr + sizeof(dpt_sp_t),
1307                          (u_int8_t *)&dccb[1]);
1308
1309         switch (ntohl(conf.splen)) {
1310         case DPT_EATA_REVA:
1311                 dpt->EATA_revision = 'a';
1312                 break;
1313         case DPT_EATA_REVB:
1314                 dpt->EATA_revision = 'b';
1315                 break;
1316         case DPT_EATA_REVC:
1317                 dpt->EATA_revision = 'c';
1318                 break;
1319         case DPT_EATA_REVZ:
1320                 dpt->EATA_revision = 'z';
1321                 break;
1322         default:
1323                 dpt->EATA_revision = '?';
1324         }
1325
1326         dpt->max_id      = conf.MAX_ID;
1327         dpt->max_lun     = conf.MAX_LUN;
1328         dpt->irq         = conf.IRQ;
1329         dpt->dma_channel = (8 - conf.DMA_channel) & 7;
1330         dpt->channels    = conf.MAX_CHAN + 1;
1331         dpt->state      |= DPT_HA_OK;
1332         if (conf.SECOND)
1333                 dpt->primary = FALSE;
1334         else
1335                 dpt->primary = TRUE;
1336
1337         dpt->more_support = conf.MORE_support;
1338
1339         if (strncmp(dpt->board_data.firmware, "07G0", 4) >= 0)
1340                 dpt->immediate_support = 1;
1341         else
1342                 dpt->immediate_support = 0;
1343
1344         dpt->broken_INQUIRY = FALSE;
1345
1346         dpt->cplen = ntohl(conf.cplen);
1347         dpt->cppadlen = ntohs(conf.cppadlen);
1348         dpt->max_dccbs = ntohs(conf.queuesiz);
1349
1350         if (dpt->max_dccbs > 256) {
1351                 kprintf("dpt%d: Max CCBs reduced from %d to "
1352                        "256 due to tag algorithm\n", dpt->unit, dpt->max_dccbs);
1353                 dpt->max_dccbs = 256;
1354         }
1355
1356         dpt->hostid[0] = conf.scsi_id0;
1357         dpt->hostid[1] = conf.scsi_id1;
1358         dpt->hostid[2] = conf.scsi_id2;
1359
1360         if (conf.SG_64K)
1361                 dpt->sgsize = 8192;
1362         else
1363                 dpt->sgsize = ntohs(conf.SGsiz);
1364
1365         /* We can only get 64k buffers, so don't bother to waste space. */
1366         if (dpt->sgsize < 17 || dpt->sgsize > 32)
1367                 dpt->sgsize = 32;
1368
1369         if (dpt->sgsize > dpt_max_segs)
1370                 dpt->sgsize = dpt_max_segs;
1371
1372         /* DMA tag for mapping buffers into device visible space. */
1373         if (bus_dma_tag_create(dpt->parent_dmat, /*alignment*/1, /*boundary*/0,
1374                                /*lowaddr*/BUS_SPACE_MAXADDR,
1375                                /*highaddr*/BUS_SPACE_MAXADDR,
1376                                /*filter*/NULL, /*filterarg*/NULL,
1377                                /*maxsize*/MAXBSIZE, /*nsegments*/dpt->sgsize,
1378                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
1379                                /*flags*/BUS_DMA_ALLOCNOW,
1380                                &dpt->buffer_dmat) != 0) {
1381                 kprintf("dpt: bus_dma_tag_create(...,dpt->buffer_dmat) failed\n");
1382                 goto error_exit;
1383         }
1384
1385         dpt->init_level++;
1386
1387         /* DMA tag for our ccb structures and interrupt status packet */
1388         if (bus_dma_tag_create(dpt->parent_dmat, /*alignment*/1, /*boundary*/0,
1389                                /*lowaddr*/BUS_SPACE_MAXADDR,
1390                                /*highaddr*/BUS_SPACE_MAXADDR,
1391                                /*filter*/NULL, /*filterarg*/NULL,
1392                                (dpt->max_dccbs * sizeof(struct dpt_ccb))
1393                                + sizeof(dpt_sp_t),
1394                                /*nsegments*/1,
1395                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
1396                                /*flags*/0, &dpt->dccb_dmat) != 0) {
1397                 kprintf("dpt: bus_dma_tag_create(...,dpt->dccb_dmat) failed\n");
1398                 goto error_exit;
1399         }
1400
1401         dpt->init_level++;
1402
1403         /* Allocation for our ccbs and interrupt status packet */
1404         if (bus_dmamem_alloc(dpt->dccb_dmat, (void *)&dpt->dpt_dccbs,
1405                              BUS_DMA_NOWAIT, &dpt->dccb_dmamap) != 0) {
1406                 kprintf("dpt: bus_dmamem_alloc(dpt->dccb_dmat,...) failed\n");
1407                 goto error_exit;
1408         }
1409
1410         dpt->init_level++;
1411
1412         /* And permanently map them */
1413         bus_dmamap_load(dpt->dccb_dmat, dpt->dccb_dmamap,
1414                         dpt->dpt_dccbs,
1415                         (dpt->max_dccbs * sizeof(struct dpt_ccb))
1416                         + sizeof(dpt_sp_t),
1417                         dptmapmem, &dpt->dpt_ccb_busbase, /*flags*/0);
1418
1419         /* Clear them out. */
1420         bzero(dpt->dpt_dccbs,
1421               (dpt->max_dccbs * sizeof(struct dpt_ccb)) + sizeof(dpt_sp_t));
1422
1423         dpt->dpt_ccb_busend = dpt->dpt_ccb_busbase;
1424
1425         dpt->sp = (dpt_sp_t*)&dpt->dpt_dccbs[dpt->max_dccbs];
1426         dpt->sp_physaddr = dpt->dpt_ccb_busbase
1427                          + (dpt->max_dccbs * sizeof(dpt_ccb_t));
1428         dpt->init_level++;
1429
1430         /* Allocate our first batch of ccbs */
1431         if (dptallocccbs(dpt) == 0) {
1432                 kprintf("dpt: dptallocccbs(dpt) == 0\n");
1433                 return (2);
1434         }
1435
1436         /* Prepare for Target Mode */
1437         dpt->target_mode_enabled = 1;
1438
1439         /* Nuke excess spaces from inquiry information */
1440         strp = dpt->board_data.vendor;
1441         for (i = 0; i < sizeof(string_sizes); i++) {
1442                 index = string_sizes[i] - 1;
1443                 while (index && (strp[index] == ' '))
1444                         strp[index--] = '\0';
1445                 strp += string_sizes[i];
1446         }
1447
1448         kprintf("dpt%d: %.8s %.16s FW Rev. %.4s, ",
1449                dpt->unit, dpt->board_data.vendor,
1450                dpt->board_data.modelNum, dpt->board_data.firmware);
1451
1452         kprintf("%d channel%s, ", dpt->channels, dpt->channels > 1 ? "s" : "");
1453
1454         if (dpt->cache_type != DPT_NO_CACHE
1455          && dpt->cache_size != 0) {
1456                 kprintf("%s Cache, ",
1457                        dpt->cache_type == DPT_CACHE_WRITETHROUGH
1458                      ? "Write-Through" : "Write-Back");
1459         }
1460
1461         kprintf("%d CCBs\n", dpt->max_dccbs);
1462         return (0);
1463
1464 error_exit:
1465         return (1);
1466 }
1467
1468 int
1469 dpt_attach(dpt_softc_t *dpt)
1470 {
1471         struct cam_devq *devq;
1472         int i;
1473
1474         /*
1475          * Create the device queue for our SIM.
1476          */
1477         devq = cam_simq_alloc(dpt->max_dccbs);
1478         if (devq == NULL)
1479                 return (0);
1480
1481         for (i = 0; i < dpt->channels; i++) {
1482                 /*
1483                  * Construct our SIM entry
1484                  */
1485                 dpt->sims[i] = cam_sim_alloc(dpt_action, dpt_poll, "dpt",
1486                                              dpt, dpt->unit, &sim_mplock,
1487                                              /*untagged*/2,
1488                                              /*tagged*/dpt->max_dccbs, devq);
1489                 if (xpt_bus_register(dpt->sims[i], i) != CAM_SUCCESS) {
1490                         cam_sim_free(dpt->sims[i]);
1491                         break;
1492                 }
1493
1494                 if (xpt_create_path(&dpt->paths[i], /*periph*/NULL,
1495                                     cam_sim_path(dpt->sims[i]),
1496                                     CAM_TARGET_WILDCARD,
1497                                     CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
1498                         xpt_bus_deregister(cam_sim_path(dpt->sims[i]));
1499                         cam_sim_free(dpt->sims[i]);
1500                         break;
1501                 }
1502
1503         }
1504         cam_simq_release(devq);
1505         if (i > 0)
1506                 EVENTHANDLER_REGISTER(shutdown_post_sync, dptshutdown,
1507                                       dpt, SHUTDOWN_PRI_DRIVER);
1508         return (i);
1509 }
1510
1511
1512 /*
1513  * This is the interrupt handler for the DPT driver.
1514  */
1515 void
1516 dpt_intr(void *arg)
1517 {
1518         dpt_softc_t    *dpt;
1519         dpt_ccb_t      *dccb;
1520         union ccb      *ccb;
1521         u_int           status;
1522         u_int           aux_status;
1523         u_int           hba_stat;
1524         u_int           scsi_stat;
1525         u_int32_t       residue_len;    /* Number of bytes not transferred */
1526
1527         dpt = (dpt_softc_t *)arg;
1528
1529         /* First order of business is to check if this interrupt is for us */
1530         while (((aux_status = dpt_inb(dpt, HA_RAUXSTAT)) & HA_AIRQ) != 0) {
1531
1532                 /*
1533                  * What we want to do now, is to capture the status, all of it,
1534                  * move it where it belongs, wake up whoever sleeps waiting to
1535                  * process this result, and get out of here.
1536                  */
1537                 if (dpt->sp->ccb_busaddr < dpt->dpt_ccb_busbase
1538                  || dpt->sp->ccb_busaddr >= dpt->dpt_ccb_busend) {
1539                         kprintf("Encountered bogus status packet\n");
1540                         status = dpt_inb(dpt, HA_RSTATUS);
1541                         return;
1542                 }
1543
1544                 dccb = dptccbptov(dpt, dpt->sp->ccb_busaddr);
1545
1546                 dpt->sp->ccb_busaddr = ~0;
1547
1548                 /* Ignore status packets with EOC not set */
1549                 if (dpt->sp->EOC == 0) {
1550                         kprintf("dpt%d ERROR: Request %d received with "
1551                                "clear EOC.\n     Marking as LOST.\n",
1552                                dpt->unit, dccb->transaction_id);
1553
1554 #ifdef DPT_HANDLE_TIMEOUTS
1555                         dccb->state |= DPT_CCB_STATE_MARKED_LOST;
1556 #endif
1557                         /* This CLEARS the interrupt! */
1558                         status = dpt_inb(dpt, HA_RSTATUS);
1559                         continue;
1560                 }
1561                 dpt->sp->EOC = 0;
1562
1563                 /*
1564                  * Double buffer the status information so the hardware can
1565                  * work on updating the status packet while we decifer the
1566                  * one we were just interrupted for.
1567                  * According to Mark Salyzyn, we only need few pieces of it.
1568                  */
1569                 hba_stat = dpt->sp->hba_stat;
1570                 scsi_stat = dpt->sp->scsi_stat;
1571                 residue_len = dpt->sp->residue_len;
1572
1573                 /* Clear interrupts, check for error */
1574                 if ((status = dpt_inb(dpt, HA_RSTATUS)) & HA_SERROR) {
1575                         /*
1576                          * Error Condition. Check for magic cookie. Exit
1577                          * this test on earliest sign of non-reset condition
1578                          */
1579
1580                         /* Check that this is not a board reset interrupt */
1581                         if (dpt_just_reset(dpt)) {
1582                                 kprintf("dpt%d: HBA rebooted.\n"
1583                                        "      All transactions should be "
1584                                        "resubmitted\n",
1585                                        dpt->unit);
1586
1587                                 kprintf("dpt%d: >>---->>  This is incomplete, "
1588                                        "fix me....  <<----<<", dpt->unit);
1589                                 panic("DPT Rebooted");
1590
1591                         }
1592                 }
1593                 /* Process CCB */
1594                 ccb = dccb->ccb;
1595                 callout_stop(&ccb->ccb_h.timeout_ch);
1596                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
1597                         bus_dmasync_op_t op;
1598
1599                         if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
1600                                 op = BUS_DMASYNC_POSTREAD;
1601                         else
1602                                 op = BUS_DMASYNC_POSTWRITE;
1603                         bus_dmamap_sync(dpt->buffer_dmat, dccb->dmamap, op);
1604                         bus_dmamap_unload(dpt->buffer_dmat, dccb->dmamap);
1605                 }
1606
1607                 /* Common Case inline... */
1608                 if (hba_stat == HA_NO_ERROR) {
1609                         ccb->csio.scsi_status = scsi_stat;
1610                         ccb->ccb_h.status = 0;
1611                         switch (scsi_stat) {
1612                         case SCSI_STATUS_OK:
1613                                 ccb->ccb_h.status |= CAM_REQ_CMP;
1614                                 break;
1615                         case SCSI_STATUS_CHECK_COND:
1616                         case SCSI_STATUS_CMD_TERMINATED:
1617                                 bcopy(&dccb->sense_data, &ccb->csio.sense_data,
1618                                       ccb->csio.sense_len);
1619                                 ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
1620                                 /* FALLTHROUGH */
1621                         default:
1622                                 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
1623                                 /* XXX Freeze DevQ */
1624                                 break;
1625                         }
1626                         ccb->csio.resid = residue_len;
1627                         dptfreeccb(dpt, dccb);
1628                         xpt_done(ccb);
1629                 } else {
1630                         dptprocesserror(dpt, dccb, ccb, hba_stat, scsi_stat,
1631                                         residue_len);
1632                 }
1633         }
1634 }
1635
1636 static void
1637 dptprocesserror(dpt_softc_t *dpt, dpt_ccb_t *dccb, union ccb *ccb,
1638                 u_int hba_stat, u_int scsi_stat, u_int32_t resid)
1639 {
1640         ccb->csio.resid = resid;
1641         switch (hba_stat) {
1642         case HA_ERR_SEL_TO:
1643                 ccb->ccb_h.status = CAM_SEL_TIMEOUT;
1644                 break;
1645         case HA_ERR_CMD_TO:
1646                 ccb->ccb_h.status = CAM_CMD_TIMEOUT;
1647                 break;
1648         case HA_SCSIBUS_RESET:
1649         case HA_HBA_POWER_UP:   /* Similar effect to a bus reset??? */
1650                 ccb->ccb_h.status = CAM_SCSI_BUS_RESET;
1651                 break;
1652         case HA_CP_ABORTED:
1653         case HA_CP_RESET:       /* XXX ??? */
1654         case HA_CP_ABORT_NA:    /* XXX ??? */
1655         case HA_CP_RESET_NA:    /* XXX ??? */
1656                 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG)
1657                         ccb->ccb_h.status = CAM_REQ_ABORTED;
1658                 break;
1659         case HA_PCI_PARITY:
1660         case HA_PCI_MABORT:
1661         case HA_PCI_TABORT:
1662         case HA_PCI_STABORT:
1663         case HA_BUS_PARITY:
1664         case HA_PARITY_ERR:
1665         case HA_ECC_ERR:
1666                 ccb->ccb_h.status = CAM_UNCOR_PARITY;
1667                 break;
1668         case HA_UNX_MSGRJCT:
1669                 ccb->ccb_h.status = CAM_MSG_REJECT_REC;
1670                 break;
1671         case HA_UNX_BUSPHASE:
1672                 ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
1673                 break;
1674         case HA_UNX_BUS_FREE:
1675                 ccb->ccb_h.status = CAM_UNEXP_BUSFREE;
1676                 break;
1677         case HA_SCSI_HUNG:
1678         case HA_RESET_STUCK:
1679                 /*
1680                  * Dead???  Can the controller get unstuck
1681                  * from these conditions
1682                  */
1683                 ccb->ccb_h.status = CAM_NO_HBA;
1684                 break;
1685         case HA_RSENSE_FAIL:
1686                 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL;
1687                 break;
1688         default:
1689                 kprintf("dpt%d: Undocumented Error %x\n", dpt->unit, hba_stat);
1690                 kprintf("Please mail this message to shimon@simon-shapiro.org\n");
1691                 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
1692                 break;
1693         }
1694         dptfreeccb(dpt, dccb);
1695         xpt_done(ccb);
1696 }
1697
1698 static void
1699 dpttimeout(void *arg)
1700 {
1701         struct dpt_ccb   *dccb;
1702         union  ccb       *ccb;
1703         struct dpt_softc *dpt;
1704
1705         dccb = (struct dpt_ccb *)arg;
1706         ccb = dccb->ccb;
1707         dpt = (struct dpt_softc *)ccb->ccb_h.ccb_dpt_ptr;
1708         xpt_print_path(ccb->ccb_h.path);
1709         kprintf("CCB %p - timed out\n", (void *)dccb);
1710
1711         crit_enter();
1712
1713         /*
1714          * Try to clear any pending jobs.  FreeBSD will loose interrupts,
1715          * leaving the controller suspended, and commands timed-out.
1716          * By calling the interrupt handler, any command thus stuck will be
1717          * completed.
1718          */
1719         dpt_intr(dpt);
1720
1721         if ((dccb->state & DCCB_ACTIVE) == 0) {
1722                 xpt_print_path(ccb->ccb_h.path);
1723                 kprintf("CCB %p - timed out CCB already completed\n",
1724                        (void *)dccb);
1725                 crit_exit();
1726                 return;
1727         }
1728
1729         /* Abort this particular command.  Leave all others running */
1730         dpt_send_immediate(dpt, &dccb->eata_ccb, dccb->eata_ccb.cp_busaddr,
1731                            /*retries*/20000, EATA_SPECIFIC_ABORT, 0, 0);
1732         ccb->ccb_h.status = CAM_CMD_TIMEOUT;
1733         crit_exit();
1734 }
1735
1736 /*
1737  * Shutdown the controller and ensure that the cache is completely flushed.
1738  * Called from the shutdown_final event after all disk access has completed.
1739  */
1740 static void
1741 dptshutdown(void *arg, int howto)
1742 {
1743         dpt_softc_t *dpt;
1744
1745         dpt = (dpt_softc_t *)arg;
1746
1747         kprintf("dpt%d: Shutting down (mode %x) HBA.    Please wait...\n",
1748                dpt->unit, howto);
1749
1750         /*
1751          * What we do for a shutdown, is give the DPT early power loss warning
1752          */
1753         dpt_send_immediate(dpt, NULL, 0, EATA_POWER_OFF_WARN, 0, 0, 0);
1754         DELAY(1000 * 1000 * 5);
1755         kprintf("dpt%d: Controller was warned of shutdown and is now "
1756                "disabled\n", dpt->unit);
1757 }
1758
1759 /*============================================================================*/
1760
1761 #if 0
1762 #ifdef DPT_RESET_HBA
1763
1764 /*
1765 **      Function name : dpt_reset_hba
1766 **
1767 **      Description : Reset the HBA and properly discard all pending work
1768 **      Input :       Softc
1769 **      Output :      Nothing
1770 */
1771 static void
1772 dpt_reset_hba(dpt_softc_t *dpt)
1773 {
1774         eata_ccb_t       *ccb;
1775         dpt_ccb_t         dccb, *dccbp;
1776         int               result;
1777         struct scsi_xfer *xs;
1778
1779         /* Prepare a control block.  The SCSI command part is immaterial */
1780         dccb.xs = NULL;
1781         dccb.flags = 0;
1782         dccb.state = DPT_CCB_STATE_NEW;
1783         dccb.std_callback = NULL;
1784         dccb.wrbuff_callback = NULL;
1785
1786         ccb = &dccb.eata_ccb;
1787         ccb->CP_OpCode = EATA_CMD_RESET;
1788         ccb->SCSI_Reset = 0;
1789         ccb->HBA_Init = 1;
1790         ccb->Auto_Req_Sen = 1;
1791         ccb->cp_id = 0; /* Should be ignored */
1792         ccb->DataIn = 1;
1793         ccb->DataOut = 0;
1794         ccb->Interpret = 1;
1795         ccb->reqlen = htonl(sizeof(struct scsi_sense_data));
1796         ccb->cp_statDMA = htonl(vtophys(&ccb->cp_statDMA));
1797         ccb->cp_reqDMA = htonl(vtophys(&ccb->cp_reqDMA));
1798         ccb->cp_viraddr = (u_int32_t) & ccb;
1799
1800         ccb->cp_msg[0] = HA_IDENTIFY_MSG | HA_DISCO_RECO;
1801         ccb->cp_scsi_cmd = 0;  /* Should be ignored */
1802
1803         /* Lock up the submitted queue.  We are very persistant here */
1804         crit_enter();
1805         while (dpt->queue_status & DPT_SUBMITTED_QUEUE_ACTIVE) {
1806                 DELAY(100);
1807         }
1808
1809         dpt->queue_status |= DPT_SUBMITTED_QUEUE_ACTIVE;
1810         crit_exit();
1811
1812         /* Send the RESET message */
1813         if ((result = dpt_send_eata_command(dpt, &dccb.eata_ccb,
1814                                             EATA_CMD_RESET, 0, 0, 0, 0)) != 0) {
1815                 kprintf("dpt%d: Failed to send the RESET message.\n"
1816                        "      Trying cold boot (ouch!)\n", dpt->unit);
1817
1818
1819                 if ((result = dpt_send_eata_command(dpt, &dccb.eata_ccb,
1820                                                     EATA_COLD_BOOT, 0, 0,
1821                                                     0, 0)) != 0) {
1822                         panic("dpt%d:  Faild to cold boot the HBA",
1823                               dpt->unit);
1824                 }
1825 #ifdef DPT_MEASURE_PERFORMANCE
1826                 dpt->performance.cold_boots++;
1827 #endif /* DPT_MEASURE_PERFORMANCE */
1828         }
1829
1830 #ifdef DPT_MEASURE_PERFORMANCE
1831         dpt->performance.warm_starts++;
1832 #endif /* DPT_MEASURE_PERFORMANCE */
1833
1834         kprintf("dpt%d:  Aborting pending requests.  O/S should re-submit\n",
1835                dpt->unit);
1836
1837         while ((dccbp = TAILQ_FIRST(&dpt->completed_ccbs)) != NULL) {
1838                 struct scsi_xfer *xs = dccbp->xs;
1839
1840                 /* Not all transactions have xs structs */
1841                 if (xs != NULL) {
1842                         /* Tell the kernel proper this did not complete well */
1843                         xs->error |= XS_SELTIMEOUT;
1844                         xs->flags |= SCSI_ITSDONE;
1845                         scsi_done(xs);
1846                 }
1847
1848                 dpt_Qremove_submitted(dpt, dccbp);
1849
1850                 /* Remember, Callbacks are NOT in the standard queue */
1851                 if (dccbp->std_callback != NULL) {
1852                         (dccbp->std_callback)(dpt, dccbp->eata_ccb.cp_channel,
1853                                                dccbp);
1854                 } else {
1855                         crit_enter();
1856                         dpt_Qpush_free(dpt, dccbp);
1857                         crit_exit();
1858                 }
1859         }
1860
1861         kprintf("dpt%d: reset done aborting all pending commands\n", dpt->unit);
1862         dpt->queue_status &= ~DPT_SUBMITTED_QUEUE_ACTIVE;
1863 }
1864
1865 #endif /* DPT_RESET_HBA */
1866
1867 /*
1868  * Build a Command Block for target mode READ/WRITE BUFFER,
1869  * with the ``sync'' bit ON.
1870  *
1871  * Although the length and offset are 24 bit fields in the command, they cannot
1872  * exceed 8192 bytes, so we take them as short integers andcheck their range.
1873  * If they are sensless, we round them to zero offset, maximum length and
1874  * complain.
1875  */
1876
1877 static void
1878 dpt_target_ccb(dpt_softc_t * dpt, int bus, u_int8_t target, u_int8_t lun,
1879                dpt_ccb_t * ccb, int mode, u_int8_t command,
1880                u_int16_t length, u_int16_t offset)
1881 {
1882         eata_ccb_t     *cp;
1883
1884         if ((length + offset) > DPT_MAX_TARGET_MODE_BUFFER_SIZE) {
1885                 kprintf("dpt%d:  Length of %d, and offset of %d are wrong\n",
1886                        dpt->unit, length, offset);
1887                 length = DPT_MAX_TARGET_MODE_BUFFER_SIZE;
1888                 offset = 0;
1889         }
1890         ccb->xs = NULL;
1891         ccb->flags = 0;
1892         ccb->state = DPT_CCB_STATE_NEW;
1893         ccb->std_callback = (ccb_callback) dpt_target_done;
1894         ccb->wrbuff_callback = NULL;
1895
1896         cp = &ccb->eata_ccb;
1897         cp->CP_OpCode = EATA_CMD_DMA_SEND_CP;
1898         cp->SCSI_Reset = 0;
1899         cp->HBA_Init = 0;
1900         cp->Auto_Req_Sen = 1;
1901         cp->cp_id = target;
1902         cp->DataIn = 1;
1903         cp->DataOut = 0;
1904         cp->Interpret = 0;
1905         cp->reqlen = htonl(sizeof(struct scsi_sense_data));
1906         cp->cp_statDMA = htonl(vtophys(&cp->cp_statDMA));
1907         cp->cp_reqDMA = htonl(vtophys(&cp->cp_reqDMA));
1908         cp->cp_viraddr = (u_int32_t) & ccb;
1909
1910         cp->cp_msg[0] = HA_IDENTIFY_MSG | HA_DISCO_RECO;
1911
1912         cp->cp_scsi_cmd = command;
1913         cp->cp_cdb[1] = (u_int8_t) (mode & SCSI_TM_MODE_MASK);
1914         cp->cp_lun = lun;       /* Order is important here! */
1915         cp->cp_cdb[2] = 0x00;   /* Buffer Id, only 1 :-( */
1916         cp->cp_cdb[3] = (length >> 16) & 0xFF;  /* Buffer offset MSB */
1917         cp->cp_cdb[4] = (length >> 8) & 0xFF;
1918         cp->cp_cdb[5] = length & 0xFF;
1919         cp->cp_cdb[6] = (length >> 16) & 0xFF;  /* Length MSB */
1920         cp->cp_cdb[7] = (length >> 8) & 0xFF;
1921         cp->cp_cdb[8] = length & 0xFF;  /* Length LSB */
1922         cp->cp_cdb[9] = 0;      /* No sync, no match bits */
1923
1924         /*
1925          * This could be optimized to live in dpt_register_buffer.
1926          * We keep it here, just in case the kernel decides to reallocate pages
1927          */
1928         if (dpt_scatter_gather(dpt, ccb, DPT_RW_BUFFER_SIZE,
1929                                dpt->rw_buffer[bus][target][lun])) {
1930                 kprintf("dpt%d: Failed to setup Scatter/Gather for "
1931                        "Target-Mode buffer\n", dpt->unit);
1932         }
1933 }
1934
1935 /* Setup a target mode READ command */
1936
1937 static void
1938 dpt_set_target(int redo, dpt_softc_t * dpt,
1939                u_int8_t bus, u_int8_t target, u_int8_t lun, int mode,
1940                u_int16_t length, u_int16_t offset, dpt_ccb_t * ccb)
1941 {
1942         if (dpt->target_mode_enabled) {
1943                 crit_enter();
1944
1945                 if (!redo)
1946                         dpt_target_ccb(dpt, bus, target, lun, ccb, mode,
1947                                        SCSI_TM_READ_BUFFER, length, offset);
1948
1949                 ccb->transaction_id = ++dpt->commands_processed;
1950
1951 #ifdef DPT_MEASURE_PERFORMANCE
1952                 dpt->performance.command_count[ccb->eata_ccb.cp_scsi_cmd]++;
1953                 ccb->command_started = microtime_now;
1954 #endif
1955                 dpt_Qadd_waiting(dpt, ccb);
1956                 dpt_sched_queue(dpt);
1957
1958                 crit_exit();
1959         } else {
1960                 kprintf("dpt%d:  Target Mode Request, but Target Mode is OFF\n",
1961                        dpt->unit);
1962         }
1963 }
1964
1965 /*
1966  * Schedule a buffer to be sent to another target.
1967  * The work will be scheduled and the callback provided will be called when
1968  * the work is actually done.
1969  *
1970  * Please NOTE:  ``Anyone'' can send a buffer, but only registered clients
1971  * get notified of receipt of buffers.
1972  */
1973
1974 int
1975 dpt_send_buffer(int unit, u_int8_t channel, u_int8_t target, u_int8_t lun,
1976                 u_int8_t mode, u_int16_t length, u_int16_t offset, void *data,
1977                 buff_wr_done callback)
1978 {
1979         dpt_softc_t    *dpt;
1980         dpt_ccb_t      *ccb = NULL;
1981
1982         /* This is an external call.  Be a bit paranoid */
1983         for (dpt = TAILQ_FIRST(&dpt_softc_list);
1984              dpt != NULL;
1985              dpt = TAILQ_NEXT(dpt, links)) {
1986                 if (dpt->unit == unit)
1987                         goto valid_unit;
1988         }
1989
1990         return (INVALID_UNIT);
1991
1992 valid_unit:
1993
1994         if (dpt->target_mode_enabled) {
1995                 if ((channel >= dpt->channels) || (target > dpt->max_id) ||
1996                     (lun > dpt->max_lun)) {
1997                         return (INVALID_SENDER);
1998                 }
1999                 if ((dpt->rw_buffer[channel][target][lun] == NULL) ||
2000                     (dpt->buffer_receiver[channel][target][lun] == NULL))
2001                         return (NOT_REGISTERED);
2002
2003                 crit_enter();
2004                 /* Process the free list */
2005                 if ((TAILQ_EMPTY(&dpt->free_ccbs)) && dpt_alloc_freelist(dpt)) {
2006                         kprintf("dpt%d ERROR: Cannot allocate any more free CCB's.\n"
2007                                "             Please try later\n",
2008                                dpt->unit);
2009                         crit_exit();
2010                         return (NO_RESOURCES);
2011                 }
2012                 /* Now grab the newest CCB */
2013                 if ((ccb = dpt_Qpop_free(dpt)) == NULL) {
2014                         crit_exit();
2015                         panic("dpt%d: Got a NULL CCB from pop_free()", dpt->unit);
2016                 }
2017                 crit_exit();
2018
2019                 bcopy(dpt->rw_buffer[channel][target][lun] + offset, data, length);
2020                 dpt_target_ccb(dpt, channel, target, lun, ccb, mode,
2021                                            SCSI_TM_WRITE_BUFFER,
2022                                            length, offset);
2023                 ccb->std_callback = (ccb_callback) callback; /* Potential trouble */
2024
2025                 crit_enter();
2026                 ccb->transaction_id = ++dpt->commands_processed;
2027
2028 #ifdef DPT_MEASURE_PERFORMANCE
2029                 dpt->performance.command_count[ccb->eata_ccb.cp_scsi_cmd]++;
2030                 ccb->command_started = microtime_now;
2031 #endif
2032                 dpt_Qadd_waiting(dpt, ccb);
2033                 dpt_sched_queue(dpt);
2034
2035                 crit_exit();
2036                 return (0);
2037         }
2038         return (DRIVER_DOWN);
2039 }
2040
2041 static void
2042 dpt_target_done(dpt_softc_t * dpt, int bus, dpt_ccb_t * ccb)
2043 {
2044         eata_ccb_t     *cp;
2045
2046         cp = &ccb->eata_ccb;
2047
2048         /*
2049          * Remove the CCB from the waiting queue.
2050          *  We do NOT put it back on the free, etc., queues as it is a special
2051          * ccb, owned by the dpt_softc of this unit.
2052          */
2053         crit_enter();
2054         dpt_Qremove_completed(dpt, ccb);
2055         crit_exit();
2056
2057 #define br_channel           (ccb->eata_ccb.cp_channel)
2058 #define br_target            (ccb->eata_ccb.cp_id)
2059 #define br_lun               (ccb->eata_ccb.cp_LUN)
2060 #define br_index             [br_channel][br_target][br_lun]
2061 #define read_buffer_callback (dpt->buffer_receiver br_index )
2062 #define read_buffer          (dpt->rw_buffer[br_channel][br_target][br_lun])
2063 #define cb(offset)           (ccb->eata_ccb.cp_cdb[offset])
2064 #define br_offset            ((cb(3) << 16) | (cb(4) << 8) | cb(5))
2065 #define br_length            ((cb(6) << 16) | (cb(7) << 8) | cb(8))
2066
2067         /* Different reasons for being here, you know... */
2068         switch (ccb->eata_ccb.cp_scsi_cmd) {
2069         case SCSI_TM_READ_BUFFER:
2070                 if (read_buffer_callback != NULL) {
2071                         /* This is a buffer generated by a kernel process */
2072                         read_buffer_callback(dpt->unit, br_channel,
2073                                              br_target, br_lun,
2074                                              read_buffer,
2075                                              br_offset, br_length);
2076                 } else {
2077                         /*
2078                          * This is a buffer waited for by a user (sleeping)
2079                          * command
2080                          */
2081                         wakeup(ccb);
2082                 }
2083
2084                 /* We ALWAYS re-issue the same command; args are don't-care  */
2085                 dpt_set_target(1, 0, 0, 0, 0, 0, 0, 0, 0);
2086                 break;
2087
2088         case SCSI_TM_WRITE_BUFFER:
2089                 (ccb->wrbuff_callback) (dpt->unit, br_channel, br_target,
2090                                         br_offset, br_length,
2091                                         br_lun, ccb->status_packet.hba_stat);
2092                 break;
2093         default:
2094                 kprintf("dpt%d:  %s is an unsupported command for target mode\n",
2095                        dpt->unit, scsi_cmd_name(ccb->eata_ccb.cp_scsi_cmd));
2096         }
2097         crit_enter();
2098         dpt->target_ccb[br_channel][br_target][br_lun] = NULL;
2099         dpt_Qpush_free(dpt, ccb);
2100         crit_exit();
2101 }
2102
2103
2104 /*
2105  * Use this function to register a client for a buffer read target operation.
2106  * The function you register will be called every time a buffer is received
2107  * by the target mode code.
2108  */
2109 dpt_rb_t
2110 dpt_register_buffer(int unit, u_int8_t channel, u_int8_t target, u_int8_t lun,
2111                     u_int8_t mode, u_int16_t length, u_int16_t offset,
2112                     dpt_rec_buff callback, dpt_rb_op_t op)
2113 {
2114         dpt_softc_t    *dpt;
2115         dpt_ccb_t      *ccb = NULL;
2116
2117         for (dpt = TAILQ_FIRST(&dpt_softc_list);
2118              dpt != NULL;
2119              dpt = TAILQ_NEXT(dpt, links)) {
2120                 if (dpt->unit == unit)
2121                         goto valid_unit;
2122         }
2123
2124         return (INVALID_UNIT);
2125
2126 valid_unit:
2127
2128         if (dpt->state & DPT_HA_SHUTDOWN_ACTIVE)
2129                 return (DRIVER_DOWN);
2130
2131         if ((channel > (dpt->channels - 1)) || (target > (dpt->max_id - 1)) ||
2132             (lun > (dpt->max_lun - 1)))
2133                 return (INVALID_SENDER);
2134
2135         if (dpt->buffer_receiver[channel][target][lun] == NULL) {
2136                 if (op == REGISTER_BUFFER) {
2137                         /* Assign the requested callback */
2138                         dpt->buffer_receiver[channel][target][lun] = callback;
2139                         /* Get a CCB */
2140                         crit_enter();
2141
2142                         /* Process the free list */
2143                         if ((TAILQ_EMPTY(&dpt->free_ccbs)) && dpt_alloc_freelist(dpt)) {
2144                                 kprintf("dpt%d ERROR: Cannot allocate any more free CCB's.\n"
2145                                        "             Please try later\n",
2146                                        dpt->unit);
2147                                 crit_exit();
2148                                 return (NO_RESOURCES);
2149                         }
2150                         /* Now grab the newest CCB */
2151                         if ((ccb = dpt_Qpop_free(dpt)) == NULL) {
2152                                 crit_exit();
2153                                 panic("dpt%d: Got a NULL CCB from pop_free()",
2154                                       dpt->unit);
2155                         }
2156                         crit_exit();
2157
2158                         /* Clean up the leftover of the previous tenant */
2159                         ccb->status = DPT_CCB_STATE_NEW;
2160                         dpt->target_ccb[channel][target][lun] = ccb;
2161
2162                         dpt->rw_buffer[channel][target][lun] =
2163                                 kmalloc(DPT_RW_BUFFER_SIZE, M_DEVBUF, M_INTWAIT);
2164                         dpt_set_target(0, dpt, channel, target, lun, mode,
2165                                        length, offset, ccb);
2166                         return (SUCCESSFULLY_REGISTERED);
2167                 } else
2168                         return (NOT_REGISTERED);
2169         } else {
2170                 if (op == REGISTER_BUFFER) {
2171                         if (dpt->buffer_receiver[channel][target][lun] == callback)
2172                                 return (ALREADY_REGISTERED);
2173                         else
2174                                 return (REGISTERED_TO_ANOTHER);
2175                 } else {
2176                         if (dpt->buffer_receiver[channel][target][lun] == callback) {
2177                                 dpt->buffer_receiver[channel][target][lun] = NULL;
2178                                 crit_enter();
2179                                 dpt_Qpush_free(dpt, ccb);
2180                                 crit_exit();
2181                                 kfree(dpt->rw_buffer[channel][target][lun], M_DEVBUF);
2182                                 return (SUCCESSFULLY_REGISTERED);
2183                         } else
2184                                 return (INVALID_CALLBACK);
2185                 }
2186
2187         }
2188 }
2189
2190 /* Return the state of the blinking DPT LED's */
2191 u_int8_t
2192 dpt_blinking_led(dpt_softc_t * dpt)
2193 {
2194         int             ndx;
2195         u_int32_t       state;
2196         u_int32_t       previous;
2197         u_int8_t        result;
2198
2199         crit_enter();
2200
2201         result = 0;
2202
2203         for (ndx = 0, state = 0, previous = 0;
2204              (ndx < 10) && (state != previous);
2205              ndx++) {
2206                 previous = state;
2207                 state = dpt_inl(dpt, 1);
2208         }
2209
2210         if ((state == previous) && (state == DPT_BLINK_INDICATOR))
2211                 result = dpt_inb(dpt, 5);
2212
2213         crit_exit();
2214         return (result);
2215 }
2216
2217 /*
2218  * Execute a command which did not come from the kernel's SCSI layer.
2219  * The only way to map user commands to bus and target is to comply with the
2220  * standard DPT wire-down scheme:
2221  */
2222 int
2223 dpt_user_cmd(dpt_softc_t * dpt, eata_pt_t * user_cmd,
2224              caddr_t cmdarg, int minor_no)
2225 {
2226         dpt_ccb_t *ccb;
2227         void      *data;
2228         int        channel, target, lun;
2229         int        huh;
2230         int        result;
2231         int        submitted;
2232         size_t     contigsize = 0;
2233
2234         data = NULL;
2235         channel = minor2hba(minor_no);
2236         target = minor2target(minor_no);
2237         lun = minor2lun(minor_no);
2238
2239         if ((channel > (dpt->channels - 1))
2240          || (target > dpt->max_id)
2241          || (lun > dpt->max_lun))
2242                 return (ENXIO);
2243
2244         if (target == dpt->sc_scsi_link[channel].adapter_targ) {
2245                 /* This one is for the controller itself */
2246                 if ((user_cmd->eataID[0] != 'E')
2247                  || (user_cmd->eataID[1] != 'A')
2248                  || (user_cmd->eataID[2] != 'T')
2249                  || (user_cmd->eataID[3] != 'A')) {
2250                         return (ENXIO);
2251                 }
2252         }
2253         /* Get a DPT CCB, so we can prepare a command */
2254         crit_enter();
2255
2256         /* Process the free list */
2257         if ((TAILQ_EMPTY(&dpt->free_ccbs)) && dpt_alloc_freelist(dpt)) {
2258                 kprintf("dpt%d ERROR: Cannot allocate any more free CCB's.\n"
2259                        "             Please try later\n",
2260                        dpt->unit);
2261                 crit_exit();
2262                 return (EFAULT);
2263         }
2264         /* Now grab the newest CCB */
2265         if ((ccb = dpt_Qpop_free(dpt)) == NULL) {
2266                 crit_exit();
2267                 panic("dpt%d: Got a NULL CCB from pop_free()", dpt->unit);
2268         } else {
2269                 crit_exit();
2270                 /* Clean up the leftover of the previous tenant */
2271                 ccb->status = DPT_CCB_STATE_NEW;
2272         }
2273
2274         bcopy((caddr_t) & user_cmd->command_packet, (caddr_t) & ccb->eata_ccb,
2275               sizeof(eata_ccb_t));
2276
2277         /* We do not want to do user specified scatter/gather.  Why?? */
2278         if (ccb->eata_ccb.scatter == 1)
2279                 return (EINVAL);
2280
2281         ccb->eata_ccb.Auto_Req_Sen = 1;
2282         ccb->eata_ccb.reqlen = htonl(sizeof(struct scsi_sense_data));
2283         ccb->eata_ccb.cp_datalen = htonl(sizeof(ccb->eata_ccb.cp_datalen));
2284         ccb->eata_ccb.cp_dataDMA = htonl(vtophys(ccb->eata_ccb.cp_dataDMA));
2285         ccb->eata_ccb.cp_statDMA = htonl(vtophys(&ccb->eata_ccb.cp_statDMA));
2286         ccb->eata_ccb.cp_reqDMA = htonl(vtophys(&ccb->eata_ccb.cp_reqDMA));
2287         ccb->eata_ccb.cp_viraddr = (u_int32_t) & ccb;
2288
2289         if (ccb->eata_ccb.DataIn || ccb->eata_ccb.DataOut) {
2290                 /* Data I/O is involved in this command.  Alocate buffer */
2291                 if (ccb->eata_ccb.cp_datalen > PAGE_SIZE) {
2292                         contigsize = ccb->eata_ccb.cp_datalen;
2293                         data = contigmalloc(ccb->eata_ccb.cp_datalen,
2294                                             M_TEMP, M_WAITOK, 0, ~0,
2295                                             ccb->eata_ccb.cp_datalen,
2296                                             0x10000);
2297                 } else {
2298                         data = kmalloc(ccb->eata_ccb.cp_datalen, M_TEMP,
2299                                       M_WAITOK);
2300                 }
2301
2302                 if (data == NULL) {
2303                         kprintf("dpt%d: Cannot allocate %d bytes "
2304                                "for EATA command\n", dpt->unit,
2305                                ccb->eata_ccb.cp_datalen);
2306                         return (EFAULT);
2307                 }
2308 #define usr_cmd_DMA (caddr_t)user_cmd->command_packet.cp_dataDMA
2309                 if (ccb->eata_ccb.DataIn == 1) {
2310                         if (copyin(usr_cmd_DMA,
2311                                    data, ccb->eata_ccb.cp_datalen) == -1)
2312                                 return (EFAULT);
2313                 }
2314         } else {
2315                 /* No data I/O involved here.  Make sure the DPT knows that */
2316                 ccb->eata_ccb.cp_datalen = 0;
2317                 data = NULL;
2318         }
2319
2320         if (ccb->eata_ccb.FWNEST == 1)
2321                 ccb->eata_ccb.FWNEST = 0;
2322
2323         if (ccb->eata_ccb.cp_datalen != 0) {
2324                 if (dpt_scatter_gather(dpt, ccb, ccb->eata_ccb.cp_datalen,
2325                                        data) != 0) {
2326                         if (data != NULL) {
2327                                 if (contigsize)
2328                                         contigfree(data, contigsize, M_TEMP);
2329                                 else
2330                                         kfree(data, M_TEMP);
2331                         }
2332                         return (EFAULT);
2333                 }
2334         }
2335         /**
2336          * We are required to quiet a SCSI bus.
2337          * since we do not queue comands on a bus basis,
2338          * we wait for ALL commands on a controller to complete.
2339          * In the mean time, sched_queue() will not schedule new commands.
2340          */
2341         if ((ccb->eata_ccb.cp_cdb[0] == MULTIFUNCTION_CMD)
2342             && (ccb->eata_ccb.cp_cdb[2] == BUS_QUIET)) {
2343                 /* We wait for ALL traffic for this HBa to subside */
2344                 crit_enter();
2345                 dpt->state |= DPT_HA_QUIET;
2346                 crit_exit();
2347
2348                 while ((submitted = dpt->submitted_ccbs_count) != 0) {
2349                         huh = tsleep((void *) dpt, PCATCH, "dptqt", 100 * hz);
2350                         switch (huh) {
2351                         case 0:
2352                                 /* Wakeup call received */
2353                                 break;
2354                         case EWOULDBLOCK:
2355                                 /* Timer Expired */
2356                                 break;
2357                         default:
2358                                 /* anything else */
2359                                 break;
2360                         }
2361                 }
2362         }
2363         /* Resume normal operation */
2364         if ((ccb->eata_ccb.cp_cdb[0] == MULTIFUNCTION_CMD)
2365             && (ccb->eata_ccb.cp_cdb[2] == BUS_UNQUIET)) {
2366                 crit_enter();
2367                 dpt->state &= ~DPT_HA_QUIET;
2368                 crit_exit();
2369         }
2370         /**
2371          * Schedule the command and submit it.
2372          * We bypass dpt_sched_queue, as it will block on DPT_HA_QUIET
2373          */
2374         ccb->xs = NULL;
2375         ccb->flags = 0;
2376         ccb->eata_ccb.Auto_Req_Sen = 1; /* We always want this feature */
2377
2378         ccb->transaction_id = ++dpt->commands_processed;
2379         ccb->std_callback = (ccb_callback) dpt_user_cmd_done;
2380         ccb->result = (u_int32_t) & cmdarg;
2381         ccb->data = data;
2382
2383 #ifdef DPT_MEASURE_PERFORMANCE
2384         ++dpt->performance.command_count[ccb->eata_ccb.cp_scsi_cmd];
2385         ccb->command_started = microtime_now;
2386 #endif
2387         crit_enter();
2388         dpt_Qadd_waiting(dpt, ccb);
2389         crit_exit();
2390
2391         dpt_sched_queue(dpt);
2392
2393         /* Wait for the command to complete */
2394         (void) tsleep((void *) ccb, PCATCH, "dptucw", 100 * hz);
2395
2396         /* Free allocated memory */
2397         if (data != NULL) {
2398                 if (contigsize)
2399                         contigfree(data, contigsize, M_TEMP);
2400                 else
2401                         kfree(data, M_TEMP);
2402         }
2403
2404         return (0);
2405 }
2406
2407 static void
2408 dpt_user_cmd_done(dpt_softc_t * dpt, int bus, dpt_ccb_t * ccb)
2409 {
2410         u_int32_t       result;
2411         caddr_t         cmd_arg;
2412
2413         crit_enter();
2414
2415         /**
2416          * If Auto Request Sense is on, copyout the sense struct
2417          */
2418 #define usr_pckt_DMA    (caddr_t)(intptr_t)ntohl(ccb->eata_ccb.cp_reqDMA)
2419 #define usr_pckt_len    ntohl(ccb->eata_ccb.cp_datalen)
2420         if (ccb->eata_ccb.Auto_Req_Sen == 1) {
2421                 if (copyout((caddr_t) & ccb->sense_data, usr_pckt_DMA,
2422                             sizeof(struct scsi_sense_data))) {
2423                         ccb->result = EFAULT;
2424                         dpt_Qpush_free(dpt, ccb);
2425                         crit_exit();
2426                         wakeup(ccb);
2427                         return;
2428                 }
2429         }
2430         /* If DataIn is on, copyout the data */
2431         if ((ccb->eata_ccb.DataIn == 1)
2432             && (ccb->status_packet.hba_stat == HA_NO_ERROR)) {
2433                 if (copyout(ccb->data, usr_pckt_DMA, usr_pckt_len)) {
2434                         dpt_Qpush_free(dpt, ccb);
2435                         ccb->result = EFAULT;
2436
2437                         crit_exit();
2438                         wakeup(ccb);
2439                         return;
2440                 }
2441         }
2442         /* Copyout the status */
2443         result = ccb->status_packet.hba_stat;
2444         cmd_arg = (caddr_t) ccb->result;
2445
2446         if (copyout((caddr_t) & result, cmd_arg, sizeof(result))) {
2447                 dpt_Qpush_free(dpt, ccb);
2448                 ccb->result = EFAULT;
2449                 crit_exit();
2450                 wakeup(ccb);
2451                 return;
2452         }
2453         /* Put the CCB back in the freelist */
2454         ccb->state |= DPT_CCB_STATE_COMPLETED;
2455         dpt_Qpush_free(dpt, ccb);
2456
2457         /* Free allocated memory */
2458         crit_exit();
2459         return;
2460 }
2461
2462 #ifdef DPT_HANDLE_TIMEOUTS
2463 /**
2464  * This function walks down the SUBMITTED queue.
2465  * Every request that is too old gets aborted and marked.
2466  * Since the DPT will complete (interrupt) immediately (what does that mean?),
2467  * We just walk the list, aborting old commands and marking them as such.
2468  * The dpt_complete function will get rid of the that were interrupted in the
2469  * normal manner.
2470  *
2471  * This function needs to run at splcam(), as it interacts with the submitted
2472  * queue, as well as the completed and free queues.  Just like dpt_intr() does.
2473  * To run it at any ISPL other than that of dpt_intr(), will mean that dpt_intr
2474  * willbe able to pre-empt it, grab a transaction in progress (towards
2475  * destruction) and operate on it.  The state of this transaction will be not
2476  * very clear.
2477  * The only other option, is to lock it only as long as necessary but have
2478  * dpt_intr() spin-wait on it. In a UP environment this makes no sense and in
2479  * a SMP environment, the advantage is dubvious for a function that runs once
2480  * every ten seconds for few microseconds and, on systems with healthy
2481  * hardware, does not do anything anyway.
2482  */
2483
2484 static void
2485 dpt_handle_timeouts(dpt_softc_t * dpt)
2486 {
2487         dpt_ccb_t      *ccb;
2488
2489         crit_enter();
2490
2491         if (dpt->state & DPT_HA_TIMEOUTS_ACTIVE) {
2492                 kprintf("dpt%d WARNING: Timeout Handling Collision\n",
2493                        dpt->unit);
2494                 crit_exit();
2495                 return;
2496         }
2497         dpt->state |= DPT_HA_TIMEOUTS_ACTIVE;
2498
2499         /* Loop through the entire submitted queue, looking for lost souls */
2500         for (ccb = TAILQ_FIRST(&dpt->submitted_ccbs);
2501              ccb != NULL;
2502              ccb = TAILQ_NEXT(ccb, links)) {
2503                 struct scsi_xfer *xs;
2504                 u_int32_t       age, max_age;
2505
2506                 xs = ccb->xs;
2507                 age = dpt_time_delta(ccb->command_started, microtime_now);
2508
2509 #define TenSec  10000000
2510
2511                 if (xs == NULL) {       /* Local, non-kernel call */
2512                         max_age = TenSec;
2513                 } else {
2514                         max_age = (((xs->timeout * (dpt->submitted_ccbs_count
2515                                                     + DPT_TIMEOUT_FACTOR))
2516                                     > TenSec)
2517                                  ? (xs->timeout * (dpt->submitted_ccbs_count
2518                                                    + DPT_TIMEOUT_FACTOR))
2519                                    : TenSec);
2520                 }
2521
2522                 /*
2523                  * If a transaction is marked lost and is TWICE as old as we
2524                  * care, then, and only then do we destroy it!
2525                  */
2526                 if (ccb->state & DPT_CCB_STATE_MARKED_LOST) {
2527                         /* Remember who is next */
2528                         if (age > (max_age * 2)) {
2529                                 dpt_Qremove_submitted(dpt, ccb);
2530                                 ccb->state &= ~DPT_CCB_STATE_MARKED_LOST;
2531                                 ccb->state |= DPT_CCB_STATE_ABORTED;
2532 #define cmd_name scsi_cmd_name(ccb->eata_ccb.cp_scsi_cmd)
2533                                 if (ccb->retries++ > DPT_RETRIES) {
2534                                         kprintf("dpt%d ERROR: Destroying stale "
2535                                                "%d (%s)\n"
2536                                                "                on "
2537                                                "c%db%dt%du%d (%d/%d)\n",
2538                                              dpt->unit, ccb->transaction_id,
2539                                                cmd_name,
2540                                                dpt->unit,
2541                                                ccb->eata_ccb.cp_channel,
2542                                                ccb->eata_ccb.cp_id,
2543                                                ccb->eata_ccb.cp_LUN, age,
2544                                                ccb->retries);
2545 #define send_ccb &ccb->eata_ccb
2546 #define ESA      EATA_SPECIFIC_ABORT
2547                                         (void) dpt_send_immediate(dpt,
2548                                                                   send_ccb,
2549                                                                   ESA,
2550                                                                   0, 0);
2551                                         dpt_Qpush_free(dpt, ccb);
2552
2553                                         /* The SCSI layer should re-try */
2554                                         xs->error |= XS_TIMEOUT;
2555                                         xs->flags |= SCSI_ITSDONE;
2556                                         scsi_done(xs);
2557                                 } else {
2558                                         kprintf("dpt%d ERROR: Stale %d (%s) on "
2559                                                "c%db%dt%du%d (%d)\n"
2560                                              "          gets another "
2561                                                "chance(%d/%d)\n",
2562                                              dpt->unit, ccb->transaction_id,
2563                                                cmd_name,
2564                                                dpt->unit,
2565                                                ccb->eata_ccb.cp_channel,
2566                                                ccb->eata_ccb.cp_id,
2567                                                ccb->eata_ccb.cp_LUN,
2568                                             age, ccb->retries, DPT_RETRIES);
2569
2570                                         dpt_Qpush_waiting(dpt, ccb);
2571                                         dpt_sched_queue(dpt);
2572                                 }
2573                         }
2574                 } else {
2575                         /*
2576                          * This is a transaction that is not to be destroyed
2577                          * (yet) But it is too old for our liking. We wait as
2578                          * long as the upper layer thinks. Not really, we
2579                          * multiply that by the number of commands in the
2580                          * submitted queue + 1.
2581                          */
2582                         if (!(ccb->state & DPT_CCB_STATE_MARKED_LOST) &&
2583                             (age != ~0) && (age > max_age)) {
2584                                 kprintf("dpt%d ERROR: Marking %d (%s) on "
2585                                        "c%db%dt%du%d \n"
2586                                        "            as late after %dusec\n",
2587                                        dpt->unit, ccb->transaction_id,
2588                                        cmd_name,
2589                                        dpt->unit, ccb->eata_ccb.cp_channel,
2590                                        ccb->eata_ccb.cp_id,
2591                                        ccb->eata_ccb.cp_LUN, age);
2592                                 ccb->state |= DPT_CCB_STATE_MARKED_LOST;
2593                         }
2594                 }
2595         }
2596
2597         dpt->state &= ~DPT_HA_TIMEOUTS_ACTIVE;
2598         crit_exit();
2599 }
2600
2601 #endif                          /* DPT_HANDLE_TIMEOUTS */
2602
2603 #endif