4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # The ${rc_conf_files} files should only contain values which override
11 # values set in this file. This eases the upgrade path when defaults
12 # are changed and new features are added.
14 # All arguments must be in double or single quotes.
16 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
18 ##############################################################
19 ### Important initial Boot-time options ####################
20 ##############################################################
22 rc_debug="NO" # Set to YES to enable debugging output from rc.d
23 rc_info="YES" # Enables display of informational messages at boot.
24 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
25 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
26 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
27 powerd_enable="NO" # Run powerd to adjust CPU speed.
28 powerd_flags="" # additional flags for powerd(8).
29 sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes.
30 sensorsd_flags="" # additional flags for sensorsd(8).
31 hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging.
32 hotplugd_flags="" # additional flags for hotplugd(8)
33 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
34 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
35 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
36 local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d"
37 # startup script dirs.
38 script_name_sep=" " # Change if your startup scripts' names contain spaces
39 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
40 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
41 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
42 extra_netfs_types="NO" # List of network extra filesystem types for delayed
43 # mount at startup (or NO).
44 devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf"
45 # Config files for devfs(5)
47 ##############################################################
48 ### Network configuration sub-section ######################
49 ##############################################################
51 ### Basic network and firewall/security options: ###
53 # see 'man firewall' for an explanation of the default firewall rules
55 hostname="" # Set this!
56 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
57 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
58 dhclient_flags="-w" # Additional flags to pass to dhcp client.
59 firewall_enable="NO" # Set to YES to enable firewall functionality
60 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
61 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
62 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
63 firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
64 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
65 firewall_open_tcp_ports="22 25 53 80 113 443"
66 firewall_open_udp_ports="53"
67 firewall_quiet="NO" # Set to YES to suppress rule display
68 firewall_logging="NO" # Set to YES to enable events logging
69 firewall_flags="" # Flags passed to ipfw when type is a file
70 ip_portrange_first="NO" # Set first dynamically allocated port
71 ip_portrange_last="NO" # Set last dynamically allocated port
72 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
73 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
74 natd_program="/sbin/natd" # path to natd, if you want a different one.
75 natd_enable="NO" # Enable natd (if firewall_enable == YES).
76 natd_interface="" # Public interface or IPaddress to use.
77 natd_flags="" # Additional flags for natd.
78 pf_enable="NO" # Set to YES to enable packet filter (pf)
79 pf_rules="/etc/pf.conf" # rules definition file for pf
80 pf_program="/usr/sbin/pfctl" # where the pfctl program lives
81 pf_flags="" # additional flags for pfctl
82 pflog_enable="NO" # Set to YES to enable packet filter logging
83 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
84 pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
85 pflog_flags="" # additional flags for pflogd
86 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
87 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
88 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
89 # For the following option you need to have TCP_DROP_SYNFIN set in your
90 # kernel. Please refer to LINT64 details.
91 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
92 # NOTE: this violates the TCP specification
93 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
94 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
95 network_interfaces="auto" # List of network interfaces (or "auto").
96 cloned_interfaces="" # List of cloned network interfaces to create.
97 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config.
98 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
99 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
100 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
102 # If you have any sppp(4) interfaces above, you might also want to set
103 # the following parameters. Refer to spppcontrol(8) for their meaning.
104 sppp_interfaces="" # List of sppp interfaces.
105 #sppp_interfaces="...0" # example: sppp over ...
106 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
107 gif_interfaces="NO" # List of GIF tunnels (or "NO").
108 #gif_interfaces="gif0 gif1" # Examples typically for a router.
109 # Choose correct tunnel addrs.
110 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
111 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
113 # User ppp configuration.
114 ppp_enable="NO" # Start user-ppp (or NO).
115 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
116 # For details see man page for ppp(8). Default is auto.
117 ppp_nat="YES" # Use PPP's internal network address translation or NO.
118 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
119 ppp_user="root" # Which user to run ppp as
121 ### Network daemon (miscellaneous) ###
122 syslogd_enable="YES" # Run syslog daemon (or NO).
123 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
124 #syslogd_flags="-s" # Flags to syslogd (if enabled).
125 syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
126 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
127 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
128 inetd_flags="-wW" # Optional flags to inetd
130 rwhod_enable="NO" # Run the rwho daemon (or NO).
131 rwhod_flags="" # Flags for rwhod
132 rarpd_enable="NO" # Run rarpd (or NO).
133 rarpd_flags="" # Flags to rarpd.
134 bootparamd_enable="NO" # Run bootparamd (or NO).
135 bootparamd_flags="" # Flags to bootparamd
136 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
137 pppoed_provider="*" # Provider and ppp(8) config file entry.
138 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
139 pppoed_interface="fxp0" # The interface that pppoed runs on.
140 sshd_enable="NO" # Enable sshd
141 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
142 sshd_flags="" # Additional flags for sshd.
144 ftpd_enable="NO" # Run stand-alone ftp daemon (or NO).
145 ftpd_flags="" # Flags for ftpd, -D added implicitly.
147 ### Network File System (NFS): ###
148 ### Server-side options also need rpcbind_enable="YES" ###
150 ### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
151 ### the mtime matches the data cache is left intact.
153 autofs_enable="NO" # Run automountd(8)
154 automount_flags="" # Flags to automount(8) (if autofs enabled).
155 automountd_flags="" # Flags to automountd(8) (if autofs enabled).
156 autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
157 nfs_client_enable="NO" # This host is an NFS client (or NO).
158 nfs_access_cache="5" # Client attribute cache timeout in seconds
159 #nfs_neg_cache="3" # Client attribute negative hit cache timeout
160 nfs_server_enable="NO" # This host is an NFS server (or NO).
161 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
162 mountd_enable="NO" # Run mountd (or NO).
163 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
164 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
165 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
166 nfs_bufpackets="" # bufspace (in packets) for client
167 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
168 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
169 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
170 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
171 rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
172 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
173 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
174 rpcbind_flags="" # Flags to rpcbind (if enabled).
175 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
176 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
177 keyserv_flags="" # Flags to keyserv (if enabled).
179 ### Network Time Services options: ###
180 timed_enable="NO" # Run the time daemon (or NO).
181 timed_flags="" # Flags to timed (if enabled).
182 dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO).
183 dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
184 dntpd_flags="" # Flags to dntpd (if enabled) also server name(s)
186 # Bluetooth deamons and options:
187 btconfig_enable="NO" # Configure Bluetooth devices (or NO).
188 btconfig_devices="" # List of Bluetooth devices (or empty for all).
189 #btconfig_<device>="" # Parameters to pass to <device>.
190 btconfig_args="" # Parameters to pass to all devices.
191 sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO).
192 sdpd_flags="" # Flags to sdpd (if enabled).
193 bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO).
194 bthcid_flags="" # Flags to bthcid (if enabled).
196 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
197 nis_client_enable="NO" # We're an NIS client (or NO).
198 nis_client_flags="" # Flags to ypbind (if enabled).
199 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
200 nis_ypset_flags="" # Flags to ypset (if enabled).
201 nis_server_enable="NO" # We're an NIS server (or NO).
202 nis_server_flags="" # Flags to ypserv (if enabled).
203 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
204 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
205 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
206 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
208 ### Network routing options: ###
209 defaultrouter="NO" # Set to default gateway (or NO).
210 static_routes="" # Set to static route list (or leave empty).
211 gateway_enable="NO" # Set to YES if this host will be a gateway.
212 router_enable="NO" # Set to YES to enable a routing daemon.
213 router_program="/sbin/routed" # Name of routing daemon to use if enabled.
214 router_flags="-q" # Flags for routing daemon.
215 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
216 mrouted_flags="" # Flags for multicast routing daemon.
217 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
218 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
219 accept_sourceroute="NO" # accept source routed packets to us
221 ### Miscellaneous network options: ###
222 icmp_bmcastecho="NO" # respond to broadcast ping packets
224 ### IPv6 options: ###
225 ipv6_enable="NO" # Set to YES to set up for IPv6.
226 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
227 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
228 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
229 ipv6_static_routes="" # Set to static route list (or leave empty).
230 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
231 # route toward loopback interface.
232 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
233 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
234 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
235 ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
236 ipv6_router_flags="" # Flags to IPv6 routing daemon.
237 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
239 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
240 # node, you should stop advertisement.
241 #ipv6_network_interfaces="ed0 ep0" # Examples for router
242 # or static configuration for end node.
243 # Choose correct prefix value.
244 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
245 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
246 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
247 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
248 ipv6_default_interface="NO" # Default output interface for scoped addrs.
249 # Now this works only for IPv6 link local
251 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
252 # advertisement daemon. If set to YES,
253 # this router becomes a possible candidate
254 # IPv6 default router for local subnets.
255 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
256 rtsold_enable="NO" # Set to YES to enable an IPv6 routing
257 # solicitation daemon. This is used for
258 # automatic discovery of non-link local
260 rtsold_flags="-a" # Do autoprobing of outgoing interface.
261 mroute6d_enable="NO" # Do IPv6 multicast routing.
262 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
263 # routing daemon. You need to
264 # install it from package or
266 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
267 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
268 # tunneling interface. Specify this entry
269 # to enable 6to4 interface.
270 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
271 # to limit peer addr range. Effective value
273 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
274 # If you like, you can set "AUTO" for this.
275 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
276 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
277 # IPv6-to-IPv4 TCP translator. You also need
279 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
281 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
282 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
283 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
284 ipv6_firewall_logging="NO" # Set to YES to enable events logging
285 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
287 ##############################################################
288 ### System console options #################################
289 ##############################################################
291 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
292 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
293 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
294 keychange="NO" # function keys default values (or NO).
295 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
296 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
297 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
298 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
299 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
300 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
301 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
302 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
303 # specifically overriden in rc.conf(5).
304 moused_enable="NO" # Run the mouse daemon.
305 moused_type="auto" # See man page for rc.conf(5) for available settings.
306 moused_port="/dev/psm0" # Set to your mouse port.
307 moused_flags="" # Any additional flags to moused.
308 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
309 # language code table, specify alternative range
310 # start like mousechar_start=3, see vidcontrol(1)
311 vidhistory="" # Set video history buffer size
312 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
313 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
316 ##############################################################
317 ### Mail Transfer Agent (MTA) options ######################
318 ##############################################################
320 mta_start_script="/etc/rc.sendmail"
321 # Script to start your chosen MTA, called by /etc/rc.
322 # Settings for /etc/rc.sendmail:
323 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
324 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
325 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
326 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
327 # Flags for localhost-only MTA
328 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
329 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
330 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
331 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
332 # Flags for sendmail_msp_queue daemon.
333 sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO).
336 ##############################################################
337 ### Miscellaneous administrative options ###################
338 ##############################################################
340 mixer_enable="YES" # Manage mixer settings across reboots
341 cron_enable="YES" # Run the periodic job daemon.
342 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
343 cron_flags="" # Which options to pass to the cron daemon.
344 lpd_enable="NO" # Run the line printer daemon.
345 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
346 lpd_flags="" # Flags to lpd (if enabled).
347 nscd_enable="NO" # Run the nsswitch caching daemon.
348 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
349 devd_flags="" # Additional flags for devd(8).
350 dumpdev="NO" # Device name to crashdump to (or NO).
351 dumpdir="/var/crash" # Directory where crash dumps are to be stored
352 savecore_flags="" # Used if dumpdev is enabled above, and present.
353 crashinfo_enable="YES" # Automatically generate crash dump summary.
354 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
355 enable_quotas="NO" # turn on quotas on startup (or NO).
356 check_quotas="YES" # Check quotas on startup (or NO).
357 accounting_enable="NO" # Turn on process accounting (or NO).
358 sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO).
359 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
360 clear_tmp_enable="NO" # Clear /tmp at startup.
361 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
362 ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib"
363 # shared library search paths
364 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
365 # Local directories with ldconfig configuration files.
366 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
367 update_motd="YES" # update version info in /etc/motd (or NO)
368 start_vinum="NO" # set to YES to start vinum
369 udevd_enable="NO" # Run udevd(8) daemon.
370 udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm).
371 lvm_enable="NO" # Run LVM volume discovery.
372 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
373 entropy_save_sz="16384" # Size of the entropy cache files (in bytes)
374 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
375 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
376 newsyslog_enable="NO" # Run newsyslog at startup.
377 newsyslog_flags="" # Flags to newsyslog (if enabled).
378 resident_enable="NO" # Process /etc/resident.conf
379 varsym_enable="NO" # Process /etc/varsym.conf
380 watchdogd_enable="NO" # Start the software watchdog daemon
382 ##############################################################
383 ### Jail Configuration #######################################
384 ##############################################################
386 jail_enable="NO" # Set to NO to disable starting of any jails
387 jail_list="" # Space separated list of names of jails
388 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
389 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
390 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
393 # To use rc's built-in jail infrastructure create entries for
394 # each jail, specified in jail_list, with the following variables.
396 # - replace 'example' with the jail's name.
397 # - except rootdir, hostname and ip, all of the following variables may be made
398 # global jail variables if you don't specify a jail name (ie. jail_interface).
400 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
401 #jail_example_hostname="default.domain.com" # Jail's hostname
402 #jail_example_ip="192.168.0.10" # Jail's IP number
403 #jail_example_interface="" # Interface to create the IP alias on
404 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
405 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
406 #jail_example_procfs_enable="NO" # mount procfs in jail
407 #jail_example_devfs_enable="NO" # mount devfs in jail
408 #jail_example_mount_enable="NO" # mount/umount jail's fs
409 #jail_example_fstab="" # fstab(5) for mount/umount
410 #jail_example_flags="-l -U root" # flags for jail(8)
412 ##############################################################
413 ### VFS quota options #######################################
414 ##############################################################
416 vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options
417 vfs_quota_sync="" # Space separated list of mount points or "NO"
419 ##############################################################
420 ### VKernel options #########################################
421 ##############################################################
423 vkernel_enable="NO" # Set to YES to enable starting of vkernels
424 vkernel_list="" # Space separated list of names of vkernels
425 #vkernel_bin="/boot/kernel.VKERNEL64" # Default path to the vkernel binary
426 #vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued
428 vknetd_enable="NO" # Bridged networking
429 vknetd_flags="-U" # Bridged networking flags
431 # Create an entry for each vkernel specified in vkernel_list
432 # replacing 'example' by the name of the vkernel.
434 #vkernel_example_bin="/boot/kernel.VKERNEL64"
435 # Path to the vkernel binary
436 #vkernel_example_memsize="64m"
437 # Amount of memory for the vkernel
438 #vkernel_example_rootimg_list="/var/vkernel/rootimg.01"
439 # Space separated list of disk images
440 #vkernel_example_iface_list="auto:bridge0"
441 # Optional: space separated list network interfaces for the vkernel
442 #vkernel_example_logfile="/dev/null"
443 # Optional: path to the console log file
444 #vkernel_example_flags="-U"
445 # Optional: aditional flags to start the vkernel with
446 #vkernel_example_kill_timeout="45"
447 # Optional: timeout before SIGKILL is issued when stopping the vkernel
449 ##############################################################
450 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
451 ### scripts to source rc_conf_files overrides safely. ##
452 ##############################################################
454 if [ -z "${source_rc_confs_defined}" ]; then
455 source_rc_confs_defined=yes
457 local i sourced_files
458 for i in ${rc_conf_files}; do
459 case ${sourced_files} in
463 sourced_files="${sourced_files}:$i:"
projects / dragonfly.git / blob