2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
4 # Build-time options are documented in make.conf(5).
6 # The intended user-driven targets are:
8 # buildworld - rebuild *everything*, including glue to help do upgrades
9 # quickworld - skip the glue and do a depend+build on the meat
10 # realquickworld - skip the glue and depend stages and just build the meat
11 # crossworld - only build the glue (particularly the cross-build environment)
12 # installworld- install everything built by "buildworld"
13 # most - build user commands, no libraries or include files
14 # installmost - install user commands, no libraries or include files
16 # Standard targets (not defined here) are documented in the makefiles in
17 # /usr/share/mk. These include:
18 # obj depend all install clean cleandepend cleanobj
20 # Put initial settings here.
23 # We must do share/info early so that installation of info `dir'
24 # entries works correctly. Do it first since it is less likely to
25 # grow dependencies on include and lib than vice versa.
26 .if exists(${.CURDIR}/share/info)
30 # We must do include and lib early so that the perl *.ph generation
31 # works correctly as it uses the header files installed by this.
32 .if exists(${.CURDIR}/include)
35 .if exists(${.CURDIR}/lib)
38 # This exists simply to ensure that the obj dir hierarchy is
39 # intact for nrelease, allowing the nrelease Makefile's to
40 # reference ${.OBJDIR}.
42 .if exists(${.CURDIR}/nrelease)
46 .if exists(${.CURDIR}/bin)
49 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
52 .if exists(${.CURDIR}/gnu)
55 .if exists(${.CURDIR}/libexec)
58 .if exists(${.CURDIR}/sbin)
61 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
64 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
67 .if exists(${.CURDIR}/sys)
70 .if exists(${.CURDIR}/usr.bin)
73 .if exists(${.CURDIR}/usr.sbin)
77 .if exists(${.CURDIR}/etc)
81 # These are last, since it is nice to at least get the base system
82 # rebuilt before you do them.
83 .if defined(LOCAL_DIRS)
84 .for _DIR in ${LOCAL_DIRS}
85 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
91 .if defined(SUBDIR_OVERRIDE)
92 SUBDIR= ${SUBDIR_OVERRIDE}
95 .if defined(NOCLEANDIR)
96 CLEANDIR= clean cleandepend
101 .if defined(NO_CLEAN)
105 # Object directory base in primary make. Note that when we rerun make
106 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
107 # subdirectory because the rest of the build system needs it that way.
108 # The original object directory base is saved in OBJTREE.
110 MAKEOBJDIRPREFIX?= /usr/obj
111 OBJTREE?= ${MAKEOBJDIRPREFIX}
113 # Used for stage installs and pathing
115 DESTDIRBASE?= ${OBJTREE}${.CURDIR}
117 # Remove DESTDIR from MAKEFLAGS. It is present in the environment
118 # anyhow, and we need to be able to override it for stage installs
119 .MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
121 # This section sets the tools used to build the world/kernel
124 WORLD_BINUTILSVER?= binutils222
126 # temporary until everybody has converted to x86_64
127 .if ${MACHINE_ARCH} == "amd64"
129 .if defined(.PARSEDIR)
132 # LEGACY MAKE - REMOVE FOR DFLY 3.6
133 .makeenv MACHINE_ARCH
137 TARGET_ARCH?= ${MACHINE_ARCH}
138 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
141 TARGET?= ${TARGET_ARCH}
144 BUILD_ARCH!= sysctl -n hw.machine_arch
146 # temporary until everybody has converted to x86_64
147 .if ${BUILD_ARCH} == "amd64"
151 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
152 .error To cross-build, set TARGET_ARCH.
156 # Backwards compatibility with older make's or older sys.mk's. make
157 # is expected to define MACHINE_PLATFORM.
159 .if !defined(MACHINE_PLATFORM)
160 MACHINE_PLATFORM= pc32
163 # XXX this is ugly and we need to come up with a nicer solution
164 .if !defined(TARGET_PLATFORM)
165 .if ${TARGET_ARCH} == "i386"
166 TARGET_PLATFORM= pc32
167 .elif ${TARGET_ARCH} == "x86_64"
168 TARGET_PLATFORM= pc64
170 .error Unknown target architecture.
174 THREAD_LIB?= thread_xu
175 .if ${THREAD_LIB} == "c_r"
176 .if defined(NO_LIBC_R)
177 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
181 # BTOOLS (Natively built) All non-cross-development tools that the
182 # main build needs. This includes things like 'mkdir' and 'rm'.
183 # We will not use the native system's exec path once we start
184 # on WORLD. (bootstrap-tools and build-tools or BTOOLS)
186 # CTOOLS (Natively built) Cross development tools which are specific
187 # to the target architecture.
189 # WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
192 # MACHINE_PLATFORM Platform Architecture we are building on
193 # MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
194 # MACHINE_ARCH Cpu Architecture we are building on
196 # TARGET_PLATFORM Platform Architecture we are building for
197 # TARGET Machine Architecture we are building for
198 # TARGET_ARCH Cpu Architecture we are building for
200 BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
201 CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
202 WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
204 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
205 # cross-tools stages to augment the existing command path to access newer
206 # versions of certain utilities such as 'patch' that the cross-tools stage
209 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
211 # The strict temporary command path contains all binaries required
212 # by the buildworld system after the cross-tools stage.
214 STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/pkg/bin
219 # Only use the host system make to bootstrap tools, including make itself
220 # Use the bootstrap make for the rest of the world
221 BTOOLMAKE= ${BTOOLSDEST}/usr/bin/make
222 BTOOLCONFIG= ${BTOOLSDEST}/usr/sbin/config
225 # Building a world goes through the following stages
227 # 1. bootstrap-tool stage [BMAKE]
228 # This stage is responsible for creating programs that
229 # are needed for backward compatibility reasons. They
230 # are not built as cross-tools.
231 # 2. build-tool stage [TMAKE]
232 # This stage is responsible for creating the object
233 # tree and building any tools that are needed during
235 # 3. cross-tool stage [XMAKE]
236 # This stage is responsible for creating any tools that
237 # are needed for cross-builds. A cross-compiler is one
239 # 4. world stage [WMAKE]
240 # This stage actually builds the world.
241 # 5. install stage (optional) [IMAKE]
242 # This stage installs a previously built world.
245 # bootstrap-tool stage
247 BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
249 DESTDIR=${BTOOLSDEST} \
250 PATH=${BTOOLSPATH}:${PATH} \
251 INSTALL="sh ${.CURDIR}/tools/install.sh"
253 BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
254 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
259 TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
262 PATH=${BTOOLSPATH}:${PATH} \
263 INSTALL="sh ${.CURDIR}/tools/install.sh"
265 TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
266 -DNO_FORTRAN -DNOSHARED
270 # note: TOOLS_PREFIX points to the obj root holding the cross
271 # compiler binaries, while USRDATA_PREFIX points to the obj root
272 # holding the target environment (and also determines where cross-built
273 # libraries, crt*.o, and include files are installed).
275 XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
277 DESTDIR=${CTOOLSDEST} \
278 INSTALL="sh ${.CURDIR}/tools/install.sh" \
279 TOOLS_PREFIX=${CTOOLSDEST} \
280 USRDATA_PREFIX=${WORLDDEST} \
281 PATH=${BTOOLSPATH}:${PATH}
283 XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
284 -DBOOTSTRAPPING -DNOSHARED
286 # world stage, note the strict path and note that TOOLS_PREFIX is left
287 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
288 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
289 # for both binary and library paths, even though it is being compiled to
290 # WORLDDEST. None of the programs in the world stage are ever actually
291 # executed during the buildworld/installworld.
293 CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
295 MACHINE_ARCH=${TARGET_ARCH} \
297 MACHINE_PLATFORM=${TARGET_PLATFORM} \
298 OBJFORMAT_PATH=${CTOOLSDEST} \
299 HOST_CCVER=${HOST_CCVER} \
300 CCVER=${WORLD_CCVER} \
301 LDVER=${WORLD_LDVER} \
302 BINUTILSVER=${WORLD_BINUTILSVER}
304 WMAKEENV= ${CROSSENV} \
305 DESTDIR=${WORLDDEST} \
306 INSTALL="sh ${.CURDIR}/tools/install.sh" \
307 PATH=${STRICTTMPPATH}
309 WMAKE= ${WMAKEENV} ${BTOOLMAKE} -f Makefile.inc1
313 IMAKEENV= ${CROSSENV} \
314 PATH=${STRICTTMPPATH}
315 IMAKE= ${IMAKEENV} ${BTOOLMAKE} -f Makefile.inc1
319 KMAKEENV= ${WMAKEENV}
323 # Attempt to rebuild the entire system, with reasonable chance of
324 # success, regardless of how old your existing system is.
326 _worldtmp: _cleantmp _mtreetmp
327 .ORDER: _cleantmp _mtreetmp
331 @echo "--------------------------------------------------------------"
332 @echo ">>> Rebuilding the temporary build tree"
333 @echo "--------------------------------------------------------------"
334 .if !defined(NOCLEAN)
335 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
337 # XXX - These two can depend on any header file.
338 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
339 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
343 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
344 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
345 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
346 -p ${_dir}/ > /dev/null
347 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
348 -p ${_dir}/usr > /dev/null
350 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
351 -p ${WORLDDEST}/usr/include > /dev/null
352 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
356 @echo "--------------------------------------------------------------"
357 @echo ">>> stage 1: bootstrap tools"
358 @echo "--------------------------------------------------------------"
359 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
362 @echo "--------------------------------------------------------------"
363 @echo ">>> stage 2a: cleaning up the object tree"
364 @echo "--------------------------------------------------------------"
365 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
368 @echo "--------------------------------------------------------------"
369 @echo ">>> stage 2b: rebuilding the object tree"
370 @echo "--------------------------------------------------------------"
371 cd ${.CURDIR}; ${WMAKE} par-obj
374 @echo "--------------------------------------------------------------"
375 @echo ">>> stage 2c: build tools"
376 @echo "--------------------------------------------------------------"
377 cd ${.CURDIR}; ${TMAKE} build-tools
380 @echo "--------------------------------------------------------------"
381 @echo ">>> stage 3: cross tools"
382 @echo "--------------------------------------------------------------"
383 cd ${.CURDIR}; ${XMAKE} cross-tools
386 @echo "--------------------------------------------------------------"
387 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
388 @echo "--------------------------------------------------------------"
389 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
392 @echo "--------------------------------------------------------------"
393 @echo ">>> stage 4b: building libraries"
394 @echo "--------------------------------------------------------------"
395 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
398 @echo "--------------------------------------------------------------"
399 @echo ">>> stage 4c: make dependencies"
400 @echo "--------------------------------------------------------------"
401 cd ${.CURDIR}; ${WMAKE} par-depend
404 @echo "--------------------------------------------------------------"
405 @echo ">>> stage 4d: building everything.."
406 @echo "--------------------------------------------------------------"
407 cd ${.CURDIR}; ${WMAKE} all
409 # note: buildworld no longer depends on _cleanobj because we rm -rf the
410 # entire object tree and built the bootstrap tools in a different location.
412 # buildworld - build everything from scratch
413 # quickworld - skip the bootstrap, build, and cross-build steps
414 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
416 # note: we include _obj in realquickworld to prevent accidental creation
417 # of files in /usr/src.
420 .if !defined(SUBDIR_OVERRIDE)
421 WMAKE_TGTS+= _worldtmp _bootstrap-tools
423 WMAKE_TGTS+= _obj _build-tools
424 .if !defined(SUBDIR_OVERRIDE)
425 WMAKE_TGTS+= _cross-tools
427 WMAKE_TGTS+= _includes _libraries _depend everything
429 buildworld: ${WMAKE_TGTS}
431 quickworld: _mtreetmp _obj _includes _libraries _depend everything
433 realquickworld: _mtreetmp _obj _includes _libraries everything
435 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
437 .ORDER: ${WMAKE_TGTS}
438 .ORDER: _obj _includes
439 .ORDER: _mtreetmp _obj
444 # Checks to be sure system is ready for installworld
447 .if !defined(NO_SENDMAIL)
448 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
449 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
451 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
452 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
453 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
454 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
455 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac
460 # Installs everything compiled by a 'buildworld'.
462 installworld: installcheck
463 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
464 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
469 # If you have a build server, you can NFS mount the source and obj directories
470 # and do a 'make reinstall' on the *client* to install new binaries from the
471 # most recent server build.
474 @echo "--------------------------------------------------------------"
475 @echo ">>> Making hierarchy"
476 @echo "--------------------------------------------------------------"
477 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
479 @echo "--------------------------------------------------------------"
480 @echo ">>> Installing everything.."
481 @echo "--------------------------------------------------------------"
482 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
485 # buildkernel, nativekernel, quickkernel, and installkernel
487 # Which kernels to build and/or install is specified by setting
488 # KERNCONF. If not defined a GENERIC kernel is built/installed.
489 # Only the existing (depending TARGET) config files are used
490 # for building kernels and only the first of these is designated
491 # as the one being installed.
493 # You can specify INSTALLSTRIPPED=1 if you wish the installed
494 # kernel and modules to be stripped of its debug info (required
495 # symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
496 # if you only want to strip the modules of their debug info. These
497 # only apply if you have DEBUG=-g in your kernel config or make line.
499 # Note that we have to use TARGET instead of TARGET_ARCH when
500 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
501 # be set to cross-build, we have to make sure TARGET is set
504 .if !defined(KERNCONF) && defined(KERNEL)
508 # XXX makeshift fix to build the right kernel for the (target) architecture
509 # We should configure this in the platform files somehow
510 .if ${TARGET_ARCH} == "i386"
513 KERNCONF?= X86_64_GENERIC
516 INSTKERNNAME?= kernel
518 KRNLSRCDIR= ${.CURDIR}/sys
519 KRNLCONFDIR= ${KRNLSRCDIR}/config
520 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
521 KERNCONFDIR?= ${KRNLCONFDIR}
525 .for _kernel in ${KERNCONF}
526 .if exists(${KERNCONFDIR}/${_kernel})
527 BUILDKERNELS+= ${_kernel}
528 .if empty(INSTALLKERNEL)
529 INSTALLKERNEL= ${_kernel}
534 # kernel version numbers survive rm -rf
536 .for _kernel in ${BUILDKERNELS}
537 .if exists(${KRNLOBJDIR}/${_kernel}/version)
538 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
545 # Builds all kernels defined by BUILDKERNELS.
548 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
549 echo "You must buildworld before buildkernel. If you wish"; \
550 echo "to build a kernel using native tools, config it manually"; \
551 echo "or use the nativekernel target if you are in a rush"; \
556 .for _kernel in ${BUILDKERNELS}
557 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
558 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
559 echo "The kernel was build using buildworld tools which no" ; \
560 echo "longer appear to exist, quickkernel failed!" ; \
567 .if empty(BUILDKERNELS)
568 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
569 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
574 .if defined(KERNWARN)
575 @echo "--------------------------------------------------------------"
576 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
577 @echo "--------------------------------------------------------------"
582 # The buildkernel target rebuilds the specified kernels from scratch
583 # using the crossbuild tools generated by the last buildworld. It is
584 # the safest (but also the most time consuming) way to build a new kernel.
586 buildkernel: bk_tools bk_build_list bk_kernwarn
587 .for _kernel in ${BUILDKERNELS}
588 @echo "--------------------------------------------------------------"
589 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
590 @echo "--------------------------------------------------------------"
591 @echo "===> ${_kernel}"
592 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
593 rm -rf ${KRNLOBJDIR}/${_kernel}
595 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
596 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
597 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
599 mkdir -p ${KRNLOBJDIR}
600 .if !defined(NO_KERNELCONFIG)
602 PATH=${STRICTTMPPATH} \
603 ${BTOOLCONFIG} ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
604 ${KERNCONFDIR}/${_kernel}
606 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
607 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
609 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
610 .if !defined(NO_KERNELDEPEND)
611 cd ${KRNLOBJDIR}/${_kernel}; \
612 ${KMAKEENV} ${BTOOLMAKE} KERNEL=${INSTKERNNAME} depend
614 cd ${KRNLOBJDIR}/${_kernel}; \
615 ${KMAKEENV} ${BTOOLMAKE} KERNEL=${INSTKERNNAME} all
616 @echo "--------------------------------------------------------------"
617 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
618 @echo "--------------------------------------------------------------"
621 # The nativekernel target rebuilds the specified kernels from scratch
622 # using the system's standard compiler rather than using the crossbuild
623 # tools generated by the last buildworld. This is fairly safe if your
624 # system is reasonable up-to-date.
626 nativekernel: bk_build_list bk_kernwarn
627 .for _kernel in ${BUILDKERNELS}
628 @echo "--------------------------------------------------------------"
629 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
630 @echo "--------------------------------------------------------------"
631 @echo "===> ${_kernel}"
632 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
633 rm -rf ${KRNLOBJDIR}/${_kernel}
635 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
636 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
637 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
639 mkdir -p ${KRNLOBJDIR}
640 .if !defined(NO_KERNELCONFIG)
642 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
643 ${KERNCONFDIR}/${_kernel}
645 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
646 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
648 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
649 cd ${KRNLOBJDIR}/${_kernel}; \
650 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
651 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
652 .if !defined(NO_KERNELDEPEND)
653 cd ${KRNLOBJDIR}/${_kernel}; \
654 ${MAKE} KERNEL=${INSTKERNNAME} depend
656 cd ${KRNLOBJDIR}/${_kernel}; \
657 ${MAKE} KERNEL=${INSTKERNNAME} all
658 @echo "--------------------------------------------------------------"
659 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
660 @echo "--------------------------------------------------------------"
663 # The quickkernel target rebuilds the specified kernels as quickly
664 # as possible. It will use the native tools or the buildworld cross tools
665 # based on whether the kernel was originally generated via buildkernel or
666 # nativekernel. Config is rerun but the object hierarchy is not rebuilt,
667 # nor is the make depend step run.
669 quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
670 .for _kernel in ${BUILDKERNELS}
671 @echo "--------------------------------------------------------------"
672 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
673 @echo "--------------------------------------------------------------"
674 @echo "===> ${_kernel}"
675 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
676 .if !defined(NO_KERNELCONFIG)
678 PATH=${STRICTTMPPATH} \
679 ${BTOOLCONFIG} ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
680 ${KERNCONFDIR}/${_kernel}
682 cd ${KRNLOBJDIR}/${_kernel}; \
683 ${KMAKEENV} ${BTOOLMAKE} KERNEL=${INSTKERNNAME} all
685 .if !defined(NO_KERNELCONFIG)
687 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
688 ${KERNCONFDIR}/${_kernel}
690 cd ${KRNLOBJDIR}/${_kernel}; \
691 ${MAKE} KERNEL=${INSTKERNNAME} all
693 @echo "--------------------------------------------------------------"
694 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
695 @echo "--------------------------------------------------------------"
701 # Install the kernel defined by INSTALLKERNEL
703 installkernel reinstallkernel:
704 @echo "--------------------------------------------------------------"
705 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
706 @echo "--------------------------------------------------------------"
707 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
708 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
709 ${IMAKEENV} ${BTOOLMAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
711 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
712 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
718 # Build most of the user binaries on the existing system libs and includes.
721 @echo "--------------------------------------------------------------"
722 @echo ">>> Building programs only"
723 @echo "--------------------------------------------------------------"
724 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
725 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
731 # Install the binaries built by the 'most' target. This does not include
732 # libraries or include files.
735 @echo "--------------------------------------------------------------"
736 @echo ">>> Installing programs only"
737 @echo "--------------------------------------------------------------"
738 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
739 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
743 # ------------------------------------------------------------------------
745 # From here onwards are utility targets used by the 'make world' and
746 # related targets. If your 'world' breaks, you may like to try to fix
747 # the problem and manually run the following targets to attempt to
748 # complete the build. Beware, this is *not* guaranteed to work, you
749 # need to have a pretty good grip on the current state of the system
750 # to attempt to manually finish it. If in doubt, 'make world' again.
753 # bootstrap-tools: Build all tools required to build all tools. Note that
754 # order is important in a number of cases and also note that the bootstrap
755 # and build tools stages have access to earlier binaries they themselves
758 # patch: older patch's do not have -i. This program must be built
759 # first so other bootstrap tools that need to apply patches
761 # [x]install: dependancies on various new install features
762 # rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
763 # envs are not compatible with older objformat binaries.
765 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
766 _strfile= games/fortune/strfile
769 BSTRAPDIRS= ${_strfile} \
771 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
772 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
773 bin/hostname bin/kill \
774 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
775 usr.bin/m4 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
776 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
777 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
778 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
779 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
780 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
781 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
782 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
783 usr.bin/tail usr.bin/unifdef usr.bin/tic \
784 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
785 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
786 gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
787 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
789 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets
790 touch ${BTOOLSDEST}/.bootstrap_done
792 bootstrap-tools-before:
793 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
795 bootstrap-tools-targets: ${BSTRAPDIRS:S/^/bstrap-/}
797 .ORDER: bootstrap-tools-before bootstrap-tools-targets
799 .for _tool in ${BSTRAPDIRS}
801 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
802 cd ${.CURDIR}/${_tool}; \
803 ${MAKE} DIRPRFX=${_tool}/ obj; \
804 ${MAKE} DIRPRFX=${_tool}/ depend; \
805 ${MAKE} DIRPRFX=${_tool}/ all; \
806 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
809 # build-tools: Build special purpose build tools.
811 # XXX we may be able to remove or consolidate this into bootstrap-tools
812 # now that we have the native helper (.nx/.no) infrastructure.
814 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
815 _share= share/syscons/scrnmaps
818 _gcc_common_cross= gnu/usr.bin/gmp gnu/usr.bin/mpfr
819 _gcc44_cross= gnu/usr.bin/cc44
820 _gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
821 .if !defined(NO_GCC47)
822 _gcc47_cross= lib/libz gnu/usr.bin/mpc gnu/usr.bin/cc47
823 _gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
825 _custom_cross= libexec/customcc
826 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
828 BTOOLSDIRS= ${_gcc44_tools} ${_gcc47_tools} ${_share}
830 build-tools: build-tools-targets
831 touch ${BTOOLSDEST}/.build_done
833 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
835 .ORDER: ${_gcc44_tools:S/^/btools-/}
836 .ORDER: ${_gcc47_tools:S/^/btools-/}
838 .for _tool in ${BTOOLSDIRS}
840 ${ECHODIR} "===> ${_tool} (build-tools)"; \
841 cd ${.CURDIR}/${_tool}; \
842 ${MAKE} DIRPRFX=${_tool}/ obj; \
843 ${MAKE} DIRPRFX=${_tool}/ depend; \
844 ${MAKE} DIRPRFX=${_tool}/ all; \
845 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
849 # cross-tools: Build cross-building tools
851 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
852 _btxld= usr.sbin/btxld
855 CTOOLSDIRS= ${_btxld} ${_binutils} usr.bin/objformat ${_gcc_common_cross} \
856 ${_gcc44_cross} ${_gcc47_cross} ${_custom_cross}
858 cross-tools: cross-tools-targets
859 touch ${CTOOLSDEST}/.cross_done
861 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
863 .for _tool in ${CTOOLSDIRS}
865 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
866 cd ${.CURDIR}/${_tool}; \
867 ${MAKE} DIRPRFX=${_tool}/ obj; \
868 ${MAKE} DIRPRFX=${_tool}/ depend; \
869 ${MAKE} DIRPRFX=${_tool}/ all; \
870 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
874 # hierarchy - ensure that all the needed directories are present
877 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
880 # libraries - build all libraries, and install them under ${DESTDIR}.
882 # The list of libraries with dependents (${_prebuild_libs}) and their
883 # interdependencies (__L) are built automatically by the
884 # ${.CURDIR}/tools/make_libdeps.sh script.
886 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
887 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
890 .if !defined(NO_GCC47)
892 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
893 ${BTOOLMAKE} -f Makefile.inc1 _startup_libs47;
896 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
897 ${BTOOLMAKE} -f Makefile.inc1 _startup_libs44;
899 ${BTOOLMAKE} -f Makefile.inc1 _startup_libs; \
900 ${BTOOLMAKE} -f Makefile.inc1 _prebuild_libs; \
901 ${BTOOLMAKE} -f Makefile.inc1 _generic_libs;
902 touch ${WORLDDEST}/.libraries_done
904 # These dependencies are not automatically generated:
906 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
907 # shared libraries for ELF. The target for _startup_libsXX is
908 # specifically built using gccXX.
910 _startup_libs47= gnu/usr.bin/cc47/cc_prep \
911 gnu/usr.bin/cc47/cc_tools \
913 gnu/lib/gcc47/libgcc \
914 gnu/lib/gcc47/libgcc_eh \
915 gnu/lib/gcc47/libgcc_pic
916 _startup_libs44= gnu/usr.bin/cc44/cc_prep \
917 gnu/usr.bin/cc44/cc_tools \
920 _startup_libs= lib/csu lib/libc lib/libc_rtld
922 _prebuild_libs= lib/libbz2 lib/liblzma lib/libz
923 _prebuild_libs+= lib/libutil
925 _generic_libs= gnu/lib
927 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
928 lib/libncurses/libncurses lib/libopie lib/libradius \
929 lib/libsbuf lib/libtacplus lib/libm \
930 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
931 lib/libpthread lib/libprop lib/libdevattr
933 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
937 .if !defined(NO_CRYPT)
938 .if !defined(NO_OPENSSL)
939 _prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
940 .if !defined(NO_OPENSSH)
941 _prebuild_libs+= secure/lib/libssh
942 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
945 _generic_libs+= secure/lib
948 _generic_libs+= usr.bin/lex/lib
950 .for _lib in ${_startup_libs44} ${_startup_libs47} \
951 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
953 .if exists(${.CURDIR}/${_lib})
954 ${ECHODIR} "===> ${_lib}"; \
955 cd ${.CURDIR}/${_lib}; \
956 ${MAKE} DIRPRFX=${_lib}/ depend; \
957 ${MAKE} DIRPRFX=${_lib}/ all; \
958 ${MAKE} DIRPRFX=${_lib}/ install
962 _startup_libs: ${_startup_libs:S/$/__L/}
963 _startup_libs47: ${_startup_libs47:S/$/__L/}
964 _startup_libs44: ${_startup_libs44:S/$/__L/}
965 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
966 _generic_libs: ${_generic_libs:S/$/__L/}
968 # library targets must be ordered because there are inter-library
969 # races (e.g. generation of tconfig.h)
971 .ORDER: ${_startup_libs47:S/$/__L/}
972 .ORDER: ${_startup_libs44:S/$/__L/}
973 .ORDER: ${_startup_libs:S/$/__L/}
974 .ORDER: ${_prebuild_libs:S/$/__L/}
975 .ORDER: ${_generic_libs:S/$/__L/}
977 .for __target in clean cleandepend cleandir obj depend includes
978 .for entry in ${SUBDIR}
979 ${entry}.${__target}__D: .PHONY
980 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
981 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
982 edir=${entry}.${MACHINE_ARCH}; \
983 cd ${.CURDIR}/$${edir}; \
985 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
987 cd ${.CURDIR}/$${edir}; \
989 ${BTOOLMAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
991 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
992 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
994 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
996 # The wmake target is used by /usr/bin/wmake to run make in a
997 # world build environment.
1000 @echo '${WMAKEENV} ${BTOOLMAKE} ${WMAKE_ARGS}'
1003 @echo '${WMAKEENV} /bin/sh'
1006 @echo '${BMAKEENV} ${BTOOLMAKE} ${BMAKE_ARGS}'
1009 @echo '${BMAKEENV} /bin/sh'
1012 @echo '${TMAKEENV} ${BTOOLMAKE} ${TMAKE_ARGS}'
1015 @echo '${TMAKEENV} /bin/sh'
1018 @echo '${XMAKEENV} ${BTOOLMAKE} ${XMAKE_ARGS}'
1021 @echo '${XMAKEENV} /bin/sh'
1023 # Take advantage of bmake error response
1025 MAKE_PRINT_VAR_ON_ERROR= \
1040 .include <bsd.subdir.mk>