3 # Copyright (c) 1990 The Regents of the University of California.
6 # Written and contributed by W. Jolitz 12/90
8 # Redistribution and use in source and binary forms are permitted provided
9 # that: (1) source distributions retain this entire copyright notice and
10 # comment, and (2) distributions including binaries display the following
11 # acknowledgement: ``This product includes software developed by the
12 # University of California, Berkeley and its contributors'' in the
13 # documentation or other materials provided with the distribution and in
14 # all advertising materials mentioning features or use of this software.
15 # Neither the name of the University nor the names of its contributors may
16 # be used to endorse or promote products derived from this software without
17 # specific prior written permission.
18 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
19 # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
20 # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
22 # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
23 # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.57 2003/02/10 11:35:53 simokawa Exp $
24 # $DragonFly: src/etc/MAKEDEV,v 1.2 2003/06/17 04:24:45 dillon Exp $
26 # Device "make" file. Valid arguments:
27 # all makes all known devices, standard number of units (or close)
28 # std standard devices
29 # jail suitable for a jail(8)
30 # local configuration specific devices
31 # mach-4 mach4&lites+devices for Mach's XFree86 distribution
32 # (see http://www.cs.hut.fi/lites.html for more info on LITES)
35 # ast* ATAPI tape drives
36 # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
37 # sa* SCSI Sequential Access Devices
40 # aac* Adaptec FSA RAID controllers
41 # aacd* Adaptec FSA RAID
42 # acd* ATAPI CD-ROM disks
44 # afd* ATAPI floppy disks
46 # cd* SCSI CD-ROM disks
47 # da* SCSI Direct Access Devices
48 # fd* floppy disk drives (3 1/2", 5 1/4")
49 # fla* M-Systems DiskOnChip
50 # idad* Compaq Smart-2 RAID arrays
51 # mcd* Mitsumi CD-ROM disks
52 # md* Memory (or malloc) disk
53 # mlx* Mylex DAC960 RAID controllers
54 # mlxd* Mylex DAC960 RAID disk volumes
55 # pst* Promise SuperTrak RAID disks
56 # scd* Sony CD-ROM disks
60 # vty* virtual console devices for syscons/pcvt/codrv
63 # mse* Logitech and ATI Inport bus mouse
65 # jogdial Sony VAIO Jogdial
66 # sysmouse Mousesystems mouse emulator for syscons
69 # refclock-* serial ports used by xntpd parse refclocks
72 # tty* general purpose serial ports
73 # cua* dialout serial ports
74 # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
75 # cuaA* Specialix SI/XIO dialout ports
76 # ttyD* Digiboard - 16 dialin ports
77 # cuaD* Digiboard - 16 dialout ports
78 # ttyE* Stallion EasyIO (stl) dialin ports
79 # cuaE* Stallion EasyIO (stl) dialout ports
80 # ttyF* Stallion Brumby (stli) dialin ports
81 # cuaF* Stallion Brumby (stli) dialout ports
82 # ttyR* Rocketport dialin ports
83 # cuaR* Rocketport dialout ports
85 # stlN Stallion EasyIO board N dialin and dialout
86 # stliN Stallion Brumby board N dialin and dialout
89 # pty* set of 32 master and slave pseudo terminals
90 # vty* virtual terminals using syscons/pcvt/codrv console
94 # ppi* Parallel port i/o
95 # pps* Pulse per second timing interface
96 # pcfclock* Parallel time sync interface
103 # usb* USB bus control device
104 # ucom* USB serial devices
105 # ugen* generic USB device
106 # uhid* Human Interface Device (HID)
110 # urio* Diamond Rio 500
111 # uscanner* USB scanners
113 # SCSI devices (other than CD-ROM, tape and disk):
114 # ch* SCSI Media-Changer (juke box) driver
115 # pt* Processor Type (HP scanner, as one example)
116 # pass* CAM Passthrough device
117 # ses* SES (SCSI Environmental Services) and
118 # SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
120 # PC-CARD (previously called PCMCIA) support
121 # card* PC-CARD slots
124 # i4b isdnd call control device
125 # i4bctl debugging control device
126 # i4btrc* trace data interface(s), one per passive card
127 # i4btel* telephony interface(s)
128 # i4bteld* telephony dialout interface(s)
129 # i4brbch* raw b channel access device(s)
131 # Special purpose devices:
132 # apm Advanced Power Management BIOS
133 # apmctl APM BIOS control device
135 # crypto crypto interface
137 # tw* xten power controller
138 # snd* various sound cards
139 # pcaudio PCM audio driver
140 # socksys iBCS2 socket system driver
141 # vat VAT compatibility audio driver (requires snd*)
142 # gsc Genius GS-4500 hand scanner
144 # tun* Tunneling IP device
145 # tap* Ethernet Tunneling device
146 # snp* tty snoop devices
147 # spigot Video Spigot video acquisition card
148 # ctx* Cortex-I video acquisition card
149 # meteor* Matrox Meteor video acquisition card (pci)
150 # bktr* Bt848 based video acquisition card (pci)
151 # labpc* National Instrument's Lab-PC and LAB-PC+
152 # perfmon CPU performance-monitoring counters
153 # pci PCI configuration-space access from user mode
154 # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
155 # kbd keyboard devices
156 # elan-mmcr AMD Elan support (e.g. mmap MMCR)
157 # agpgart AGP interface
158 # cfs* Coda Distributed Filesystem
159 # nsmb* SMB/CIFS protocol interface
162 if [ -n "$MAKEDEVPATH" ]; then
169 # Usage: die exitcode msg
175 # Convert integer to partition name
180 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
186 # Convert integer to slice name
198 # Convert disk (type, unit, slice, partition) to minor number
201 echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
204 # Override mknod(2) to add extra handling to it.
206 for i in `IFS=':'; echo $PATH`; do
207 if [ -x "${i}/mknod" ]; then
215 4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";;
216 5) "$mknod" "$@" || die 2 "$mknod $@ failed";;
217 *) die 2 "bad node: mknod $@";;
221 # Convert tape (ctrl, unit, mode, access) to minor number
224 echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
227 # Convert the last character of a tty name to a minor number.
232 a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
233 h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
234 o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
241 # Convert a unit number to a minor number.
244 echo $(((($1 >> 8) << 16) | ($1 % 256)))
247 # For the stallion devices tty[EF]
248 # stallion major letter card iscallout
261 if [ $iscallout -gt 0 ]; then
269 *) die 1 "Invalid stl card number $card";;
272 # make the mem interface for extracting stats & loading microcode.
273 # 0x1000000 + card number
274 mknod staliomem$card c $major 0x0100000$card
276 while [ $port -lt $maxport ]; do
277 minor=$(($minorbase + $card * 1048576 + $port))
278 if [ $port -ge 32 ]; then
279 minor=$(($minor + 65504))
281 unit=$(($card * 64 + $port))
283 mknod ${pref}${letter}$unit c $major $minor $owner
284 mknod ${pref}i${letter}$unit c $major $(($minor + 32)) $owner
285 mknod ${pref}l${letter}$unit c $major $(($minor + 64)) $owner
290 # Raw partition for disks
293 # Compatibility slice for disks
296 # Raw slice for disks
300 disk_umask=037 # allow group operator to read disks
301 tape_umask=017 # allow group operator to read/write tapes
307 sh MAKEDEV std # standard
308 sh MAKEDEV fd0 fd1 # bdev, floppy disk
309 sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk
310 sh MAKEDEV ata # cdev, ATA control
311 sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk
312 sh MAKEDEV ar0 ar1 # bdev, ATA RAID disk
313 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
314 sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk
315 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
316 sh MAKEDEV vn0 # bdev, virtual disk
317 sh MAKEDEV cd0 mcd0 scd0 # bdev, cdrom
318 sh MAKEDEV sa0 wt0 # bdev, tape
319 sh MAKEDEV vty12 # cdev, virtual tty
320 sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
321 sh MAKEDEV pty0 # cdev, pseudo tty
322 sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
323 sh MAKEDEV zs0 # big-Alpha serial tty
324 sh MAKEDEV kbd0 kbd1 # cdev, keyboard
325 sh MAKEDEV mse0 psm0 jogdial sysmouse # cdev, mouse
326 sh MAKEDEV pcaudio speaker snd0 # cdev, noise
327 sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
328 sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
329 sh MAKEDEV iic0 iic1 # cdev, I2C device
330 sh MAKEDEV smb0 smb1 # cdev, SMBus device
331 sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
332 sh MAKEDEV urio0 uscanner0 umodem0 # cdev, USB devices too
333 sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
334 sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
335 sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network
336 sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
337 sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
338 sh MAKEDEV pass4 xpt2 # cdev, CAM
339 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
340 sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
341 sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
342 sh MAKEDEV agpgart # cdev, AGP
343 sh MAKEDEV nsmb0 # cdev, SMB/CIFS
344 sh MAKEDEV crypto # cdev, crypto
345 sh MAKEDEV fw0 fw1 fw2 fw3 fwmem0 # cdev, firewire
348 # a much restricted set of the above, to save precious i-nodes on the
351 sh MAKEDEV std # standard
352 sh MAKEDEV fd0 # bdev, floppy disk
353 sh MAKEDEV da0 # bdev, SCSI disk
354 sh MAKEDEV ad0 # bdev, ATA disk
355 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
356 sh MAKEDEV wd0 # bdev, OLD disk
357 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
358 sh MAKEDEV vn0 # bdev, virtual disk
359 sh MAKEDEV cd0 # bdev, cdrom
360 sh MAKEDEV sa0 # bdev, tape
361 sh MAKEDEV vty2 # cdev, virtual tty
362 sh MAKEDEV cuaa0 # cdev, serial tty
363 sh MAKEDEV pty0 # cdev, pseudo tty
364 sh MAKEDEV ttyd0 # cdev, serial tty
365 sh MAKEDEV zs0 # big-Alpha serial tty
366 sh MAKEDEV kbd0 # cdev, keyboard
367 sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
368 sh MAKEDEV lpt0 # cdev, printer
369 sh MAKEDEV ppi0 # cdev, parallel port
370 sh MAKEDEV iic0 # cdev, I2C device
371 sh MAKEDEV smb0 # cdev, SMBus device
372 sh MAKEDEV ums0 # cdev, USB devices
373 sh MAKEDEV tun0 # cdev, network
374 sh MAKEDEV tap0 # cdev, network
375 sh MAKEDEV ch0 # cdev, miscellaneous
376 sh MAKEDEV apm apmctl card0 # cdev, laptop
377 sh MAKEDEV pass1 xpt1 # cdev, CAM
378 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
379 sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN
380 sh MAKEDEV i4brbch0 # cdev, ISDN
385 mknod console c 0 0; chmod 600 console
386 mknod kmem c 2 1 root:kmem; chmod 640 kmem
387 mknod mem c 2 0 root:kmem; chmod 640 mem
388 mknod null c 2 2; chmod 666 null
389 mknod random c 2 3; chmod 644 random
390 mknod urandom c 2 4; chmod 644 urandom
391 mknod zero c 2 12; chmod 666 zero
392 mknod io c 2 14; chmod 600 io
393 mknod tty c 1 0; chmod 666 tty
394 mknod klog c 7 0; chmod 600 klog
395 mknod stdin c 22 0; chmod 666 stdin
396 mknod stdout c 22 1; chmod 666 stdout
397 mknod stderr c 22 2; chmod 666 stderr
398 mknod pci c 78 0; chmod 644 pci
401 while [ $i -lt 64 ]; do
412 rm mem kmem pci io klog console # for security
413 ln -sf null mem # for libkvm (ab)users
414 ln -sf null kmem # --//--
423 mknod timezone c 26 0
426 # Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
429 u=`expr $i : '..\(.*\)'`
430 if [ -z "${u}" ]; then u=0; fi
431 # default density, 512b blocks
432 mknod rwt${u} c 10 $(( 0 + $u)) root:operator
433 mknod nrwt${u} c 10 $(( 4 + $u)) root:operator
434 # default density, 1024b blocks
435 # mknod rWt${u} c 10 $((64 + $u)) root:operator
436 # mknod nrWt${u} c 10 $((68 + $u)) root:operator
437 mknod rwt${u}b c 10 $((16 + $u)) root:operator # 60 megabytes
438 mknod nrwt${u}b c 10 $((20 + $u)) root:operator
439 mknod rwt${u}c c 10 $((24 + $u)) root:operator # 120 megabytes
440 mknod nrwt${u}c c 10 $((28 + $u)) root:operator
441 mknod rwt${u}d c 10 $((32 + $u)) root:operator # 150 megabytes
442 mknod nrwt${u}d c 10 $((36 + $u)) root:operator
443 # mknod rwt${u}e c 10 $((40 + $u)) root:operator # 300 megabytes?
444 # mknod nrwt${u}e c 10 $((44 + $u)) root:operator
445 # mknod rwt${u}f c 10 $((48 + $u)) root:operator # 600 megabytes?
446 # mknod nrwt${u}f c 10 $((52 + $u)) root:operator
451 aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|md*s*|mlxd*s*|pst*s*|twed*s*|vn*s*|wd*s*|wfd*s*)
454 aacd*s*) name=aacd; chr=151;;
455 ad*s*) name=ad; chr=116;;
456 ar*s*) name=ar; chr=157;;
457 afd*s*) name=afd; chr=118;;
458 amrd*s*) name=amrd; chr=133;;
459 da*s*) name=da; chr=13;;
460 fla*s*) name=fla; chr=102;;
461 idad*s*) name=idad; chr=109;;
462 md*s*) name=md; chr=95;;
463 mlxd*s*) name=mlxd; chr=131;;
464 pst*s*) name=pst; chr=168;;
465 twed*s*) name=twed; chr=147;;
466 vn*s*) name=vn; chr=43;;
467 wd*s*) name=wd; chr=3;;
468 wfd*s*) name=wfd; chr=87;;
471 aacd*s*|amrd*s*|idad*s*|mlxd*s*|twed*s*)
472 unit=`expr $i : '....\([0-9]*\)s'`
473 slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
474 part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
476 afd*s*|fla*s*|pst*s*|wfd*s*)
477 unit=`expr $i : '...\([0-9]*\)s'`
478 slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
479 part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
482 unit=`expr $i : '..\([0-9]*\)s'`
483 slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
484 part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
488 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
493 slicename=`dkitos $slice`
494 minor=`dkminor 0 $unit $slice $dkrawpart`
495 mknod $name$unit$slicename c $chr $minor root:operator
496 ln -f $name$unit$slicename r$name$unit$slicename
500 0) slice=$oldslice ;;
502 for part in 0 1 2 3 4 5 6 7
504 minor=`dkminor 0 $unit $slice $part`
505 partname=`dkitop $part`
506 mknod $name$unit$slicename$partname \
507 c $chr $minor root:operator
508 ln -f $name$unit$slicename$partname \
509 r$name$unit$slicename$partname
515 echo bad partition for disk in: $i
520 echo bad slice for disk in: $i
525 echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
533 unit=`expr $i : '..\(.*\)'`
537 mknod ${name}${unit} c $chr $(($unit * 64)) root:operator
538 ln -f ${name}${unit} r${name}${unit}
539 # Fake BSD partitions
540 for i in a b c d e f g h
542 ln -f ${name}${unit} ${name}${unit}$i
543 ln -f r${name}${unit} r${name}${unit}$i
545 # User-readable and programmer-readable name sets
547 mknod ${name}${unit}.1720 c $chr $(($unit * 64 + 1)) \
549 ln -f ${name}${unit}.1720 r${name}${unit}.1720
550 # ln -f ${name}${unit}.1720 ${name}${unit}135hs21
551 # ln -f r${name}${unit}.1720 r${name}${unit}135hs21
553 mknod ${name}${unit}.1480 c $chr $(($unit * 64 + 2)) \
555 ln -f ${name}${unit}.1480 r${name}${unit}.1480
556 # ln -f ${name}${unit}.1480 ${name}${unit}135hs18
557 # ln -f r${name}${unit}.1480 r${name}${unit}135hs18
558 # ln -f ${name}${unit}.1480 ${name}${unit}96hs18
559 # ln -f r${name}${unit}.1480 r${name}${unit}96hs18
561 mknod ${name}${unit}.1440 c $chr $(($unit * 64 + 3)) \
563 ln -f ${name}${unit}.1440 r${name}${unit}.1440
564 # ln -f ${name}${unit}.1440 ${name}${unit}135
565 # ln -f r${name}${unit}.1440 r${name}${unit}135
566 # ln -f ${name}${unit}.1440 ${name}${unit}135ds18
567 # ln -f r${name}${unit}.1440 r${name}${unit}135ds18
568 # ln -f ${name}${unit}.1440 ${name}${unit}96ds18
569 # ln -f r${name}${unit}.1440 r${name}${unit}96ds18
571 mknod ${name}${unit}.1200 c $chr $(($unit * 64 + 4)) \
573 ln -f ${name}${unit}.1200 r${name}${unit}.1200
574 # ln -f ${name}${unit}.1200 ${name}${unit}96
575 # ln -f r${name}${unit}.1200 r${name}${unit}96
576 # ln -f ${name}${unit}.1200 ${name}${unit}96ds15
577 # ln -f r${name}${unit}.1200 r${name}${unit}96ds15
578 # ln -f ${name}${unit}.1200 ${name}${unit}135ds15
579 # ln -f r${name}${unit}.1200 r${name}${unit}135ds15
581 mknod ${name}${unit}.820 c $chr $(($unit * 64 + 5)) \
583 ln -f ${name}${unit}.820 r${name}${unit}.820
584 # ln -f ${name}${unit}.820 ${name}${unit}96hs10
585 # ln -f r${name}${unit}.820 r${name}${unit}96hs10
586 # ln -f ${name}${unit}.820 ${name}${unit}135hs10
587 # ln -f r${name}${unit}.820 r${name}${unit}135hs10
589 mknod ${name}${unit}.800 c $chr $(($unit * 64 + 6)) \
591 ln -f ${name}${unit}.800 r${name}${unit}.800
592 # ln -f ${name}${unit}.800 ${name}${unit}96ds10
593 # ln -f r${name}${unit}.800 r${name}${unit}96ds10
594 # ln -f ${name}${unit}.800 ${name}${unit}135ds10
595 # ln -f r${name}${unit}.800 r${name}${unit}135ds10
597 mknod ${name}${unit}.720 c $chr $(($unit * 64 + 7)) \
599 ln -f ${name}${unit}.720 r${name}${unit}.720
600 # ln -f ${name}${unit}.720 ${name}${unit}96ds9
601 # ln -f r${name}${unit}.720 r${name}${unit}96ds9
602 # ln -f ${name}${unit}.720 ${name}${unit}135ds9
603 # ln -f r${name}${unit}.720 r${name}${unit}135ds9
605 mknod ${name}${unit}.360 c $chr $(($unit * 64 + 8)) \
607 ln -f ${name}${unit}.360 r${name}${unit}.360
608 # ln -f ${name}${unit}.360 ${name}${unit}48
609 # ln -f r${name}${unit}.360 r${name}${unit}48
610 # ln -f ${name}${unit}.360 ${name}${unit}48ds9
611 # ln -f r${name}${unit}.360 r${name}${unit}48ds9
613 mknod ${name}${unit}.640 c $chr $(($unit * 64 + 9)) \
615 ln -f ${name}${unit}.640 r${name}${unit}.640
616 # ln -f ${name}${unit}.640 ${name}${unit}96ds8
617 # ln -f r${name}${unit}.640 r${name}${unit}96ds8
618 # ln -f ${name}${unit}.640 ${name}${unit}135ds8
619 # ln -f r${name}${unit}.640 r${name}${unit}135ds8
621 mknod ${name}${unit}.1232 c $chr $(($unit * 64 + 10)) \
623 ln -f ${name}${unit}.1232 r${name}${unit}.1232
624 # ln -f ${name}${unit}.1232 ${name}${unit}96ds8
625 # ln -f r${name}${unit}.1232 r${name}${unit}96ds8
626 # ln -f ${name}${unit}.1232 ${name}${unit}135ds8
627 # ln -f r${name}${unit}.1232 r${name}${unit}135ds8
630 echo bad unit for disk in: $i
636 aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|md*|mlxd*|pst*|twed*|vn*|wd*|wfd*)
639 aacd*) name=aacd; chr=151;;
640 ad*) name=ad; chr=116;;
641 ar*) name=ar; chr=157;;
642 afd*) name=afd; chr=118;;
643 amrd*) name=amrd; chr=133;;
644 da*) name=da; chr=13;;
645 fla*) name=fla; chr=102;;
646 idad*) name=idad; chr=109;;
647 md*) name=md; chr=95;;
648 mlxd*) name=mlxd; chr=131;;
649 pst*) name=pst; chr=168;;
650 twed*) name=twed; chr=147;;
651 vn*) name=vn; chr=43;;
652 wd*) name=wd; chr=3;;
653 wfd*) name=wfd; chr=87;;
656 aacd*|amrd*|idad*|mlxd*|twed*)
657 unit=`expr $i : '....\(.*\)'`
660 unit=`expr $i : '...\(.*\)'`
663 unit=`expr $i : '..\(.*\)'`
667 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
668 for slicepartname in s0h s1h s2 s3 s4
670 sh MAKEDEV $name$unit$slicepartname
674 echo bad unit for disk in: $i
684 unit=`expr $i : '...\(.*\)'`
686 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
687 for part in 0 1 2 3 4 5 6 7
689 minor=`dkminor 0 $unit 0 $part`
690 partname=`dkitop $part`
691 mknod $name$unit$partname c $chr $minor root:operator
692 ln -f $name$unit$partname r$name$unit$partname
696 echo bad unit for disk in: $i
702 # SCSI processor type driver
706 unit=`expr $i : 'pt\([0-9][0-9]*\)'`
707 if [ -z "${unit}" ]; then
710 unit=$(($unit + 1 - 1))
711 mknod ${name}${unit} c $chr `unit2minor $unit`
714 # SCSI SES/SAF-TE type driver
718 unit=`expr $i : 'ses\([0-9][0-9]*\)'`
719 if [ -z "${unit}" ]; then
722 unit=$(($unit + 1 - 1))
723 mknod ${name}${unit} c $chr `unit2minor $unit`
725 # SCSI target mode sample driver
729 unit=`expr $i : 'targ\([0-9][0-9]*\)'`
730 if [ -z "${unit}" ]; then
733 unit=$(($unit + 1 - 1))
734 mknod ${name}${unit} c $chr `unit2minor $unit`
735 mknod ${name}.ctl c $chr 0xffff00ff
738 # CAM transport layer device
740 # This major number is temporary
743 units=`expr $i : 'xpt\(.*\)'`
744 if [ -z "${units}" ]; then
748 while [ $i -lt $units ]; do
750 rm -rf $dname r$dname
751 mknod $dname c $chr `unit2minor $i` root:operator
756 # CAM passthrough device
758 # This major number is temporary
761 units=`expr $i : 'pass\(.*\)'`
762 if [ -z "${units}" ]; then
766 while [ $i -lt $units ]; do
768 rm -rf $dname r$dname
769 mknod $dname c $chr `unit2minor $i` root:operator
774 class=`expr $i : 'pty\(.*\)'`
777 1) offset=32 name=q;;
778 2) offset=64 name=r;;
779 3) offset=96 name=s;;
780 # Note that xterm (at least) only look at p-s.
781 4) offset=128 name=P;;
782 5) offset=160 name=Q;;
783 6) offset=192 name=R;;
784 7) offset=224 name=S;;
785 # This still leaves [tuTU].
786 *) echo bad unit for pty in: $i;;
792 while [ $i -lt 32 ]; do
793 # This was an awk substr() before.
794 c=$(echo 0123456789abcdefghijklmnopqrstuv |
795 dd bs=1 skip=$i count=1 2>/dev/null)
796 mknod tty$name$c c 5 $(($offset + $i))
797 mknod pty$name$c c 6 $(($offset + $i))
807 unit=`expr $i : '..\(.*\)'`
811 [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
812 mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
813 ln -f sa${unit}.ctl rsa${unit}.ctl
816 mknod sa${unit}.${m} c $chr \
817 `saminor 0 ${unit} ${m} 0` root:operator
818 ln -f sa${unit}.${m} rsa${unit}.${m}
819 mknod nsa${unit}.${m} c $chr \
820 `saminor 0 ${unit} ${m} 1` root:operator
821 ln -f nsa${unit}.${m} nrsa${unit}.${m}
822 mknod esa${unit}.${m} c $chr \
823 `saminor 0 ${unit} ${m} 2` root:operator
824 ln -f esa${unit}.${m} ersa${unit}.${m}
826 ln -f sa${unit}.0 sa${unit}
827 ln -f sa${unit}.0 rsa${unit}.0
828 ln -f sa${unit}.0 rsa${unit}
829 ln -f nsa${unit}.0 nsa${unit}
830 ln -f nsa${unit}.0 nrsa${unit}.0
831 ln -f nsa${unit}.0 nrsa${unit}
832 ln -f esa${unit}.0 esa${unit}
833 ln -f esa${unit}.0 ersa${unit}.0
834 ln -f esa${unit}.0 ersa${unit}
837 echo bad unit for tape in: $i
845 unit=`expr $i : '..\(.*\)'`
847 ch*) name=ch; chr=17;;
851 mknod ${name}${unit} c $chr $unit root:operator
854 echo bad unit for media changer in: $i
861 mknod ata c 159 0 root:operator
865 unit=`expr $i : '...\(.*\)'`
869 mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator
871 mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator
872 chmod 640 nast${unit}
875 echo bad unit for tape in: $i
883 units=`expr $i : '...\(.*\)t'`;
884 tracks=`expr $i : '.*t\(.*\)'`;
887 if [ -z "${units}" ]; then
890 if [ -z "${tracks}" ]; then
893 if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then
895 while [ $i -le $units ]; do
899 while [ $j -le ${tracks} ]; do
900 mknod ${dname}t$j c $chr \
901 $((($i * 8) + (65536 * $j))) \
908 echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
916 acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
917 cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
918 mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
919 scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
921 if [ -z "${units}" ]; then
924 if [ "${units}" -le 31 ]; then
926 while [ $i -le $units ]; do
928 rm -rf ${dname}* r${dname}*
929 mknod ${dname}a c $chr $(($i * 8)) root:operator
932 ln -f ${dname}a ${dname}c;;
934 mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator;;
936 ln -f ${dname}a r${dname}a
937 ln -f ${dname}c r${dname}c
941 echo "$i is invalid -- can't have more than 32 cd devices"
948 unit=`expr $i : '...\(.*\)'`
952 mknod wcd${unit}a c $chr $(($unit * 8 + 0)) root:operator
953 mknod wcd${unit}c c $chr $(($unit * 8 + 2)) root:operator
954 ln -f wcd${unit}a rwcd${unit}a
955 ln -f wcd${unit}c rwcd${unit}c
956 chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
959 echo bad unit for disk in: $i
967 unit=`expr $i : '...\(.*\)'`
971 mknod rwst${unit} c $chr $(($unit * 8 + 0)) root:operator
972 chmod 640 rwst${unit}
979 unit=`expr $i : 'iic\(.*\)'`
980 mknod iic$unit c 105 `unit2minor $unit`
984 unit=`expr $i : 'smb\(.*\)'`
985 mknod smb$unit c 106 `unit2minor $unit`
989 unit=`expr $i : 'pcfclock\(.*\)'`
990 mknod pcfclock$unit c 140 `unit2minor $unit`
994 unit=`expr $i : 'ppi\(.*\)'`
995 mknod ppi$unit c 82 `unit2minor $unit`
999 unit=`expr $i : 'pps\(.*\)'`
1000 mknod pps$unit c 89 `unit2minor $unit`
1004 mknod usb c 108 255 root:operator
1010 unit=`expr $i : 'usb\(.*\)'`
1011 mknod usb$unit c 108 `unit2minor $unit` root:operator
1017 unit=`expr $i : 'ucom\(.*\)'`
1018 minor=$(($unit + 128))
1019 minor=`unit2minor $(($unit + 128))`
1020 mknod ucom$unit c 138 $minor uucp:dialer
1026 unit=`expr $i : 'uhid\(.*\)'`
1027 mknod uhid$unit c 122 `unit2minor $unit` root:operator
1033 unit=`expr $i : 'ums\(.*\)'`
1034 mknod ums$unit c 111 `unit2minor $unit` root:operator
1039 unit=`expr $i : 'ulpt\(.*\)'`
1040 minor=`unit2minor $unit`
1041 mknod ulpt$unit c 113 $minor
1042 minor=`unit2minor $(($unit + 64))`
1043 mknod unlpt$unit c 113 $minor # and the 'no prime' version
1048 unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
1049 endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
1050 if [ -z "${unit}" ]; then
1051 echo $i - Invalid unit number
1053 if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15
1054 mknod ugen$unit c 114 \
1055 `unit2minor $(($unit * 16))` root:operator
1057 while [ $i -lt 16 ]; do
1058 mknod ugen$unit.$i c 114 \
1059 `unit2minor $(($unit * 16 + $i))` root:operator
1063 minor=`unit2minor $(($unit * 16 + $endpoint))`
1064 mknod ugen$unit.$endpoint c 114 $minor root:operator
1071 unit=`expr $i : 'urio\(.*\)'`
1072 mknod urio$unit c 143 `unit2minor $unit` root:operator
1078 unit=`expr $i : 'uscanner\(.*\)'`
1079 mknod uscanner$unit c 156 `unit2minor $unit` root:operator
1085 unit=`expr $i : 'umodem\(.*\)'`
1086 mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer
1091 unit=`expr $i : 'lpt\(.*\)'`
1092 mknod lpt$unit c 16 `unit2minor $unit`
1093 mknod lpctl$unit c 16 `unit2minor $(($unit + 128))`
1096 # Use this to create virtual consoles for syscons, pcvt or codrv
1098 # use as MAKEDEV vtyNN to create NN entries
1101 units=`expr $i : 'vty\(.*\)'`
1103 while [ $i -lt $units ]; do
1104 mknod ttyv$(printf %01x $i) c $chr `unit2minor $i`
1107 ln -fs ttyv0 vga # XXX X still needs this pccons relic
1111 units=`expr $i : 'nmdm\(.*\)'`
1114 while [ $i -lt $units ]; do
1115 minor=`unit2minor $i`
1116 minor=$(($minor + $minor))
1117 mknod nmdm${i}A c $chr $minor
1118 mknod nmdm${i}B c $chr $(($minor + 1))
1124 nbpf=`expr $i : 'bpf\(.*\)$'`
1126 while [ $unit -le $nbpf ]; do
1127 mknod bpf$unit c 23 `unit2minor $unit`
1133 mknod speaker c 26 0
1138 unit_low=`expr $i : 'cua.*\(.\)$'`
1145 unit_high=`expr $i : 'cuaa\(.\).$'`
1146 m_high=`ttyminor $unit_high`
1149 unit=$unit_high$unit_low
1150 m=$(($m_high << 16 | `ttyminor $unit_low`))
1151 mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer
1152 mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer
1153 mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer
1158 mknod crypto c 70 0 root:operator
1163 unit=`expr $i : 'fwmem\(.*\)'`
1164 mknod fwmem$unit c 127 $((1<<24 | $unit)) root:operator
1165 chmod 660 fwmem$unit
1169 unit=`expr $i : 'fw\(.*\)'`
1170 mknod fw$unit c 127 $unit root:operator
1174 tty?|tty0?|ttyd?|ttyd??)
1175 unit_low=`expr $i : 'tty.*\(.\)$'`
1182 unit_high=`expr $i : 'ttyd\(.\).$'`
1183 m_high=`ttyminor $unit_high`
1186 unit=$unit_high$unit_low
1187 m=$(($m_high << 16 | `ttyminor $unit_low`))
1188 mknod ttyd$unit c 28 $m
1189 mknod ttyid$unit c 28 $(($m | 32))
1190 mknod ttyld$unit c 28 $(($m | 64))
1195 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1196 g h i j k l m n o p q r s t u v"
1198 card=`expr $i : 'cua.*\(.\)$'`
1199 for unit in $portlist
1201 minor=`ttyminor $unit`
1202 minor=$(($card * 65536 + $minor))
1204 mknod cuac$name c $major $(($minor + 128)) uucp:dialer
1205 mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer
1206 mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer
1212 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1213 g h i j k l m n o p q r s t u v"
1215 card=`expr $i : 'tty.*\(.\)$'`
1216 for unit in $portlist
1218 minor=`ttyminor $unit`
1219 minor=$(($card * 65536 + $minor))
1221 mknod ttyc$name c $major $minor
1222 mknod ttyic$name c $major $(($minor + 32))
1223 mknod ttylc$name c $major $(($minor + 64))
1227 # RISCom8 'rc' driver entries
1231 unit=`expr $i : 'cua.*\(.\)$'`
1233 mknod cuam$unit c 63 $(($m + 128)) uucp:dialer
1238 unit=`expr $i : 'tty.*\(.\)$'`
1240 mknod ttym$unit c 63 $m
1244 # Note: these are 'base 1' to match the numbers on the panels, and to match
1245 # the manual that comes with the system.
1248 nports=`expr $i : 'ttyA\(.*\)$'`
1250 while [ $port -le $nports ]; do
1251 minor=$(($port - 1))
1252 name=$(printf %02d $port)
1253 mknod ttyA$name c $major $minor
1254 mknod ttyiA$name c $major $(($minor + 65536))
1255 mknod ttylA$name c $major $(($minor + 131072))
1258 # For the user-mode control program, 'sicontrol'
1259 mknod si_control c 68 262144
1265 nports=`expr $i : 'cuaA\(.*\)$'`
1267 while [ $port -le $nports ]; do
1268 minor=$(($port - 1))
1269 name=$(printf %02d $port)
1270 mknod cuaA$name c $major $(($minor + 128)) uucp:dialer
1271 mknod cuaiA$name c $major $(($minor + 128 + 65536)) \
1273 mknod cualA$name c $major $(($minor + 128 + 131072)) \
1280 # Alpha AS8[24]00 (TurboLaser) console.
1282 unit=`expr $i : 'zs.*\(.\)$'`
1284 mknod zs$unit c 135 $m
1287 # Digiboard PC/?? 16 port card.
1288 # The current scheme of minor numbering is:
1290 # unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
1292 # CARD bitfield in future versions may be extended to 3 bits.
1297 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1299 card=`expr $i : 'tty.*\(.\)$'`
1300 for unit in $portlist
1302 minor=`ttyminor $unit`
1303 minor=$(($card * 65536 + $minor))
1305 mknod ttyD$name c $major $minor
1306 mknod ttyiD$name c $major $(($minor + 32))
1307 mknod ttylD$name c $major $(($minor + 64))
1313 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1315 card=`expr $i : 'cua.*\(.\)$'`
1316 for unit in $portlist
1318 minor=`ttyminor $unit`
1319 minor=$(($card * 65536 + $minor))
1321 mknod cuaD$name c $major $(($minor + 128)) uucp:dialer
1322 mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer
1323 mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer
1328 # Stallion multi serial cards (stl and stli drivers)
1330 # These drivers reserve 64 minor devices per board, even if the board
1331 # supports only 4 devices. We default to creating only 8 of the 64 devices
1332 # to keep /dev from getting too large (which => slow). The last part of the
1333 # arg is the board number to create ports for. So:
1334 # ttyE0 will create 8 dialin ports ttyE0-ttyE7, plus ttyiE* and ttylE*
1335 # cuaE0 will create 8 dialout ports cuaE0-cuaE7, plus cuaiE* and cualE*
1336 # ttyE1 will create 8 dialin ports ttyE64-ttyE71, plus ttyiE* and ttylE*
1338 # If you have EasyConnect 8/32 or 8/64 cards, you will need to change the
1339 # definition of "maxport" below to get nodes for the full 32 or 64
1342 # Note that the mapping of minor device numbers (with the hole between
1343 # 32-64k) is a bit odd to keep compatibility with ttyd? for
1344 # lock/initial devices.
1345 # Minor device field for the ports is
1346 # card{3} unused{4} unit-msb{1} unused{8} callout{1} lock{1} init{1} unit-lsbs{5}
1347 # for the mem device is
1349 # (For stl, there is only 1 mem device per system; for stli, one per board)
1352 stallion 72 E `expr $i : 'tty.*\(.\)$'` 0
1355 stallion 72 E `expr $i : 'cua.*\(.\)$'` 1
1358 card=`expr $i : 'stl\(.\)$'`
1359 stallion 72 E $card 0
1360 stallion 72 E $card 1
1364 stallion 75 F `expr $i : 'tty.*\(.\)$'` 0
1367 stallion 75 F `expr $i : 'cua.*\(.\)$'` 1
1370 card=`expr $i : 'stl\(.\)$'`
1371 stallion 75 F $card 0
1372 stallion 75 F $card 1
1376 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1377 modulelist="a b c d"
1379 card=`expr $i : 'tty.*\(.\)$'`
1380 for unit in $modulelist
1382 moduleminor=`ttyminor $unit`
1383 moduleminor=$(($moduleminor % 10 * 16))
1386 for unit in $portlist
1388 minor=`ttyminor $unit`
1389 minor=$(($card * 65536 + $minor + $moduleminor))
1390 name=$card$modulename$unit
1392 mknod ttyM$name c $major $minor
1393 mknod ttyiM$name c $major $(($minor + 64))
1394 mknod ttylM$name c $major $(($minor + 128))
1401 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1402 modulelist="a b c d"
1404 card=`expr $i : 'cua.*\(.\)$'`
1405 for unit in $modulelist
1407 moduleminor=`ttyminor $unit`
1408 moduleminor=$(($moduleminor % 10 * 16))
1411 for unit in $portlist
1413 minor=`ttyminor $unit`
1414 minor=$(($card * 65536 + $minor + $moduleminor))
1415 name=$card$modulename$unit
1417 mknod cuaM$name c $major $(($minor + 262144)) \
1419 mknod cuaiM$name c $major $(($minor + 64 + 262144)) \
1421 mknod cualM$name c $major $(($minor + 128 + 262144)) \
1431 MINOR=$(($BOARD * 65536))
1433 dmesg | while read first rest; do
1441 rm -f ttyR* ttyiR* ttylR*
1442 for i in $controllers; do
1444 dmesg | while read first bar ports rest; do
1452 echo -n "Creating $ndevices devices for $i: "
1454 while [ $dev -lt $ndevices ]; do
1455 mknod ttyR$Rnum c $major $MINOR
1456 mknod ttyiR$Rnum c $major $(($MINOR + 32))
1457 mknod ttylR$Rnum c $major $(($MINOR + 64))
1459 MINOR=$(($MINOR + 1))
1462 BOARD=$(($BOARD + 1))
1463 MINOR=$(($BOARD * 65536))
1471 MINOR=$(($BOARD * 65536))
1473 dmesg | while read first rest; do
1481 rm -f cuaR* cuaiR* cualR*
1482 for i in $controllers; do
1484 dmesg | while read first bar ports rest; do
1492 echo -n "Creating $ndevices devices for $i: "
1494 while [ $dev -lt $ndevices ]; do
1495 mknod cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer
1496 mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
1498 mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \
1501 MINOR=$(($MINOR + 1))
1504 BOARD=$(($BOARD + 1))
1505 MINOR=$(($BOARD * 65536))
1511 unit=`expr $i : 'mse\(.*\)'`
1513 # non-blocking for X11
1514 mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))`
1518 unit=`expr $i : 'psm\(.*\)'`
1520 # non-blocking for X11
1521 mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))`
1525 name=`expr $i : 'mouse\(.*\)'`
1526 if [ ! -c $name ]; then
1527 $0 $name # make the appropriate device
1533 mknod pcaudio c 24 0
1534 mknod pcaudioctl c 24 128
1538 mknod socksys c 41 0
1541 chmod 666 socksys nfsd spx
1546 # changes from Linux voxware
1547 # minor Linux FreeBSD
1548 # 8 sequencer2 (aka music0) music0
1549 # 17 patmgr0 sequencer1
1550 # 33 patmgr1 sequencer2
1553 unit=`expr $i : 'snd\(.*\)'`
1556 # XXX write this less verbosely, like std
1557 snd_security_hole=0 # XXX
1558 umask $snd_security_hole
1560 ln -fs mixer$unit mixer
1561 ln -fs sequencer$unit sequencer
1563 ln -fs audio$unit audio
1564 ln -fs dspW$unit dspW
1565 ln -fs music$unit music
1567 ln -fs dsp$unit.0 dsp$unit
1568 ln -fs audio$unit.0 audio$unit
1569 ln -fs dspW$unit.0 dspW$unit
1571 mknod mixer$unit c $chr `unit2minor $(($unit * 16 + 0))`
1572 mknod sequencer$unit c $chr `unit2minor $(($unit * 16 + 1))`
1573 mknod midi$unit c $chr `unit2minor $(($unit * 16 + 2))`
1577 minor=$(($chn * 65536 + $unit * 16))
1578 mknod dsp$unit.$chn c $chr $(($minor + 3))
1579 mknod audio$unit.$chn c $chr $(($minor + 4))
1580 mknod dspW$unit.$chn c $chr $(($minor + 5))
1583 mknod sndstat c $chr 6
1584 # minor number 7 is unused
1585 mknod music$unit c $chr `unit2minor $(($unit * 16 + 8))`
1586 mknod pss$unit c $chr `unit2minor $(($unit * 16 + 9))`
1587 # minor numbers 10-15 are unused
1592 mknod vatio c 25 128
1597 unit=`expr $i : 'gsc\(.*\)'`
1598 mknod gsc${unit} c 47 `unit2minor $unit`
1599 mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))`
1600 mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))`
1601 mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))`
1602 chmod 666 gsc${unit}*
1606 mknod apm c 39 0 root:operator
1611 mknod apmctl c 39 8 root:operator
1616 unit=`expr $i : 'card\(.*\)'`
1618 mknod card$unit c $chr `unit2minor $unit`
1624 *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
1625 *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
1626 *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
1627 *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
1630 ttyy?) unit=$(($unit + 16));;
1631 ttyz?) unit=$(($unit + 32));;
1637 mknod cronyx c 42 63
1641 mknod joy0 c 51 0 root:operator
1642 mknod joy1 c 51 1 root:operator
1652 unit=`expr $i : 'ctx\(.*\)'`
1653 mknod ctx$unit c 40 `unit2minor $unit`
1658 unit=`expr $i : 'meteor\(.*\)'`
1659 mknod meteor$unit c 67 `unit2minor $unit`
1660 chmod 444 meteor$unit
1664 unit=`expr $i : 'bktr\(.*\)'`
1665 mknod bktr$unit c 92 `unit2minor $unit`
1666 mknod tuner$unit c 92 `unit2minor $((16 + $unit))`
1667 mknod vbi$unit c 92 `unit2minor $((32 + $unit))`
1668 chmod 444 bktr$unit tuner$unit vbi$unit
1672 ntun=`expr $i : 'tun\(.*\)$'`
1674 while [ $unit -le $ntun ]; do
1675 mknod tun$unit c 52 `unit2minor $unit`
1681 ntap=`expr $i : 'tap\(.*\)$'`
1683 while [ $unit -le $ntap ]; do
1684 mknod tap$unit c 149 `unit2minor $unit` root:network
1690 mknod sysmouse c 12 128
1691 mknod consolectl c 12 255
1695 mknod jogdial c 160 0
1699 unit=`expr $i : 'snp\(.*\)'`
1700 mknod snp$unit c 53 `unit2minor $unit`
1703 # dufault@hda.com: If I do much more work on other A-D boards
1704 # then eventually we'll have a "ad" and "dio" interface and some of these
1705 # "labpcaio" ones will be gone.
1706 # labpcaio: D-A and A-D.
1707 # labpcdio: Digital in and Digital out.
1714 unit=`expr $i : 'labpcaio\(.*\)'`
1715 all="0 1 2 3 4 5 6 7"
1720 unit=`expr $i : 'labpcdio\(.*\)'`
1725 die 3 "Don't know LabPC type $i"
1728 if [ -z "${unit}" ]; then
1733 mknod $name$unit c 66 $(($offset + $unit))
1738 mknod $name$i c 66 $(($offset + $i))
1742 echo "No such LabPC unit: $unit"
1749 mknod perfmon c 2 32 root:kmem
1756 mknod ipstate c 79 2
1761 mknod elan-mmcr c 100 0 # XXX local major
1766 unit=`expr $i : 'kbd\(.*\)'`
1768 mknod kbd$unit c $chr `unit2minor $unit`
1780 unit=`expr $i : 'i4brbch\(.*\)'`
1781 mknod i4brbch$unit c 57 `unit2minor $unit`
1786 unit=`expr $i : 'i4bteld\(.*\)'`
1787 mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))`
1791 unit=`expr $i : 'i4btel\(.*\)'`
1792 mknod i4btel$unit c 56 `unit2minor $unit`
1796 unit=`expr $i : 'i4btrc\(.*\)'`
1797 mknod i4btrc$unit c 59 `unit2minor $unit`
1801 unit=`expr $i : 'aac\(.*\)'`
1802 mknod aac$unit c 150 `unit2minor $unit`
1803 ln -fs aac$unit afa$unit
1804 ln -fs aac$unit hpn$unit
1808 unit=`expr $i : 'mlx\(.*\)'`
1809 mknod mlx$unit c 130 `unit2minor $unit`
1813 unit=`expr $i : 'amr\(.*\)'`
1814 mknod amr$unit c 132 `unit2minor $unit`
1818 unit=`expr $i : 'ciss\(.*\)'`
1819 mknod ciss$unit c 166 `unit2minor $unit`
1823 mknod agpgart c 148 0
1827 unit=`expr $i : 'twe\(.*\)'`
1828 mknod twe$unit c 146 `unit2minor $unit`
1832 unit=`expr $i : 'tw\(.*\)'`
1833 mknod tw$unit c 19 `unit2minor $unit` root:operator
1837 unit=`expr $i : 'cfs\(.*\)'`
1838 mknod cfs$unit c 93 $unit root:operator
1842 unit=`expr $i : 'nsmb\(.*\)'`
1843 mknod nsmb$unit c 144 $unit
1847 umask 0 # XXX should be elsewhere
1853 echo $i - no such device name