Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 # $DragonFly: src/Makefile.inc1,v 1.21 2004/03/20 16:27:39 drhodus Exp $
   4 #
   5 # Make command line options:
   6 #       -DMAKE_KERBEROS5 to build Kerberos5
   7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   8 #       -DNOCLEAN do not clean at all
   9 #       -DNOCRYPT will prevent building of crypt versions
  10 #       -DNOMAN do not build the manual pages
  11 #       -DNOPROFILE do not build profiled libraries
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24
  25 #
  26 # The intended user-driven targets are:
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # installworld- install everything built by "buildworld"
  29 # update      - convenient way to update your source tree (eg: sup/cvs)
  30 # most        - build user commands, no libraries or include files
  31 # installmost - install user commands, no libraries or include files
  32 #
  33 # Standard targets (not defined here) are documented in the makefiles in
  34 # /usr/share/mk.  These include:
  35 #               obj depend all install clean cleandepend cleanobj
  36
  37 # Put initial settings here.
  38 SUBDIR=
  39
  40 # We must do share/info early so that installation of info `dir'
  41 # entries works correctly.  Do it first since it is less likely to
  42 # grow dependencies on include and lib than vice versa.
  43 .if exists(${.CURDIR}/share/info)
  44 SUBDIR+= share/info
  45 .endif
  46
  47 # We must do include and lib early so that the perl *.ph generation
  48 # works correctly as it uses the header files installed by this.
  49 .if exists(${.CURDIR}/include)
  50 SUBDIR+= include
  51 .endif
  52 .if exists(${.CURDIR}/lib)
  53 SUBDIR+= lib
  54 .endif
  55 # This exists simply to ensure that the obj dir hierarchy is
  56 # intact for nrelease, allowing the nrelease Makefile's to
  57 # reference ${.OBJDIR}.
  58 #
  59 .if exists(${.CURDIR}/nrelease)
  60 SUBDIR+= nrelease
  61 .endif
  62
  63 .if exists(${.CURDIR}/bin)
  64 SUBDIR+= bin
  65 .endif
  66 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  67 SUBDIR+= games
  68 .endif
  69 .if exists(${.CURDIR}/gnu)
  70 SUBDIR+= gnu
  71 .endif
  72 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  73     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
  74 SUBDIR+= kerberos5
  75 .endif
  76 .if exists(${.CURDIR}/libexec)
  77 SUBDIR+= libexec
  78 .endif
  79 .if exists(${.CURDIR}/sbin)
  80 SUBDIR+= sbin
  81 .endif
  82 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
  83 SUBDIR+= secure
  84 .endif
  85 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  86 SUBDIR+= share
  87 .endif
  88 .if exists(${.CURDIR}/sys)
  89 SUBDIR+= sys
  90 .endif
  91 .if exists(${.CURDIR}/usr.bin)
  92 SUBDIR+= usr.bin
  93 .endif
  94 .if exists(${.CURDIR}/usr.sbin)
  95 SUBDIR+= usr.sbin
  96 .endif
  97
  98 # etc must be last for "distribute" to work
  99 .if exists(${.CURDIR}/etc)
 100 SUBDIR+= etc
 101 .endif
 102
 103 # These are last, since it is nice to at least get the base system
 104 # rebuilt before you do them.
 105 .if defined(LOCAL_DIRS)
 106 .for _DIR in ${LOCAL_DIRS}
 107 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
 108 SUBDIR+= ${_DIR}
 109 .endif
 110 .endfor
 111 .endif
 112
 113 .if defined(SUBDIR_OVERRIDE)
 114 SUBDIR=         ${SUBDIR_OVERRIDE}
 115 .endif
 116
 117 .if defined(NOCLEANDIR)
 118 CLEANDIR=       clean cleandepend
 119 .else
 120 CLEANDIR=       cleandir
 121 .endif
 122
 123 SUP?=           /usr/local/bin/cvsup
 124 SUPFLAGS?=      -g -L 2 -P -
 125 .if defined(SUPHOST)
 126 SUPFLAGS+=      -h ${SUPHOST}
 127 .endif
 128
 129 MAKEOBJDIRPREFIX?=      /usr/obj
 130 TARGET_ARCH?=   ${MACHINE_ARCH}
 131 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 132 TARGET?=        ${MACHINE}
 133 .else
 134 TARGET?=        ${TARGET_ARCH}
 135 .endif
 136 .if make(buildworld)
 137 BUILD_ARCH!=    sysctl -n hw.machine_arch
 138 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 139 .error To cross-build, set TARGET_ARCH.
 140 .endif
 141 .endif
 142 .if ${MACHINE} == ${TARGET}
 143 OBJTREE=        ${MAKEOBJDIRPREFIX}
 144 .else
 145 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET}
 146 .endif
 147 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 148 # /usr/games added for fortune which depend on strfile
 149 STRICTTMPPATH=  ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 150 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 151
 152 TMPDIR?=        /tmp
 153 TMPPID!=        echo $$$$
 154 INSTALLTMP=     ${TMPDIR}/install.${TMPPID}
 155
 156 #
 157 # Building a world goes through the following stages
 158 #
 159 # 1. bootstrap-tool stage [BMAKE]
 160 #       This stage is responsible for creating programs that
 161 #       are needed for backward compatibility reasons. They
 162 #       are not built as cross-tools.
 163 # 2. build-tool stage [TMAKE]
 164 #       This stage is responsible for creating the object
 165 #       tree and building any tools that are needed during
 166 #       the build process.
 167 # 3. cross-tool stage [XMAKE]
 168 #       This stage is responsible for creating any tools that
 169 #       are needed for cross-builds. A cross-compiler is one
 170 #       of them.
 171 # 4. world stage [WMAKE]
 172 #       This stage actually builds the world.
 173 # 5. install stage (optional) [IMAKE]
 174 #       This stage installs a previously built world.
 175 #
 176
 177 # Common environment for world related stages
 178 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 179                 MACHINE_ARCH=${TARGET_ARCH} \
 180                 MACHINE=${TARGET} \
 181                 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.00503 \
 182                 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
 183                 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
 184                 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
 185
 186 # bootstrap-tool stage
 187 BMAKEENV=       MAKEOBJDIRPREFIX=${WORLDTMP} \
 188                 DESTDIR= \
 189                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 190 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 191                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 192                 -DNO_WERROR
 193
 194 # build-tool stage
 195 TMAKEENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 196                 DESTDIR= \
 197                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 198 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING
 199
 200 # cross-tool stage
 201 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 202
 203 # world stage
 204 WMAKEENV=       ${CROSSENV} \
 205                 DESTDIR=${WORLDTMP} \
 206                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 207                 PATH=${TMPPATH}
 208 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 209
 210 # install stage
 211 IMAKEENV=       ${CROSSENV} \
 212                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 213 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 214
 215 # kernel stage
 216 KMAKEENV=       ${WMAKEENV}
 217
 218 # /usr/bin/gccX                 version-specific gcc binaries
 219 # /usr/lib/gccX                 version-specific gcc libraries
 220 # /usr/libexec/gccX             version-specific gcc helper binaries
 221 # /usr/libexec/binutilsXXX      version-specific binutils
 222
 223 USRDIRS=        usr/bin \
 224                 usr/lib/gcc2 usr/lib/gcc3 \
 225                 usr/libexec/gcc2 usr/libexec/gcc3 \
 226                 usr/lib/compat/aout usr/games \
 227                 usr/libdata \
 228                 usr/libexec/binutils212 \
 229                 usr/libexec/binutils212/elf \
 230                 usr/libexec/binutils212/aout \
 231                 usr/libexec/binutils212/ldscripts \
 232                 usr/libexec/binutils214 \
 233                 usr/libexec/binutils214/elf \
 234                 usr/libexec/binutils214/ldscripts \
 235                 usr/sbin usr/share/misc \
 236                 usr/share/dict \
 237                 usr/share/groff_font/devX100 \
 238                 usr/share/groff_font/devX100-12 \
 239                 usr/share/groff_font/devX75 \
 240                 usr/share/groff_font/devX75-12 \
 241                 usr/share/groff_font/devascii \
 242                 usr/share/groff_font/devcp1047 \
 243                 usr/share/groff_font/devdvi \
 244                 usr/share/groff_font/devhtml \
 245                 usr/share/groff_font/devkoi8-r \
 246                 usr/share/groff_font/devlatin1 \
 247                 usr/share/groff_font/devlbp \
 248                 usr/share/groff_font/devlj4 \
 249                 usr/share/groff_font/devps \
 250                 usr/share/groff_font/devutf8 \
 251                 usr/share/tmac/mdoc usr/share/tmac/mm
 252
 253 # XXX remove in favor of the BSD.include.dist mtree that we already have.
 254 #
 255 INCDIRS=        arpa dev c++/2.95 isc libmilter objc openssl \
 256                 protocols readline rpc rpcsvc security
 257
 258 #
 259 # buildworld
 260 #
 261 # Attempt to rebuild the entire system, with reasonable chance of
 262 # success, regardless of how old your existing system is.
 263 #
 264 _worldtmp:
 265         @echo
 266         @echo "--------------------------------------------------------------"
 267         @echo ">>> Rebuilding the temporary build tree"
 268         @echo "--------------------------------------------------------------"
 269 .if !defined(NOCLEAN)
 270         rm -rf ${WORLDTMP}
 271 .else
 272         # XXX - These two can depend on any header file.
 273         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 274         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 275 .endif
 276 .for _dir in ${USRDIRS}
 277         mkdir -p ${WORLDTMP}/${_dir}
 278 .endfor
 279 .for _dir in ${INCDIRS}
 280         mkdir -p ${WORLDTMP}/usr/include/${_dir}
 281 .endfor
 282         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 283 _bootstrap-tools:
 284         @echo
 285         @echo "--------------------------------------------------------------"
 286         @echo ">>> stage 1: bootstrap tools"
 287         @echo "--------------------------------------------------------------"
 288         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 289 _cleanobj:
 290 .if !defined(NOCLEAN)
 291         @echo
 292         @echo "--------------------------------------------------------------"
 293         @echo ">>> stage 2: cleaning up the object tree"
 294         @echo "--------------------------------------------------------------"
 295         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 296 .endif
 297 _obj:
 298         @echo
 299         @echo "--------------------------------------------------------------"
 300         @echo ">>> stage 2: rebuilding the object tree"
 301         @echo "--------------------------------------------------------------"
 302         cd ${.CURDIR}; ${WMAKE} par-obj
 303 _build-tools:
 304         @echo
 305         @echo "--------------------------------------------------------------"
 306         @echo ">>> stage 2: build tools"
 307         @echo "--------------------------------------------------------------"
 308         cd ${.CURDIR}; ${TMAKE} build-tools
 309 _cross-tools:
 310         @echo
 311         @echo "--------------------------------------------------------------"
 312         @echo ">>> stage 3: cross tools"
 313         @echo "--------------------------------------------------------------"
 314         cd ${.CURDIR}; ${XMAKE} cross-tools
 315 _includes:
 316         @echo
 317         @echo "--------------------------------------------------------------"
 318         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 319         @echo "--------------------------------------------------------------"
 320         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 321 _libraries:
 322         @echo
 323         @echo "--------------------------------------------------------------"
 324         @echo ">>> stage 4: building libraries"
 325         @echo "--------------------------------------------------------------"
 326         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 327 _depend:
 328         @echo
 329         @echo "--------------------------------------------------------------"
 330         @echo ">>> stage 4: make dependencies"
 331         @echo "--------------------------------------------------------------"
 332         cd ${.CURDIR}; ${WMAKE} par-depend
 333 everything:
 334         @echo
 335         @echo "--------------------------------------------------------------"
 336         @echo ">>> stage 4: building everything.."
 337         @echo "--------------------------------------------------------------"
 338         cd ${.CURDIR}; ${WMAKE} all
 339
 340
 341 WMAKE_TGTS=
 342 .if !defined(SUBDIR_OVERRIDE)
 343 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 344 .endif
 345 WMAKE_TGTS+=    _cleanobj _obj _build-tools
 346 .if !defined(SUBDIR_OVERRIDE)
 347 WMAKE_TGTS+=    _cross-tools
 348 .endif
 349 WMAKE_TGTS+=    _includes _libraries _depend everything
 350
 351 buildworld: ${WMAKE_TGTS}
 352 .ORDER: ${WMAKE_TGTS}
 353
 354 #
 355 # installcheck
 356 #
 357 # Checks to be sure system is ready for installworld
 358 #
 359 installcheck:
 360 .if !defined(NO_SENDMAIL)
 361         @if ! `id -u smmsp > /dev/null`; then \
 362                 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
 363                 false; \
 364         fi
 365         @if ! `id -g smmsp > /dev/null`; then \
 366                 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
 367                 false; \
 368         fi
 369 .endif
 370
 371 #
 372 # distributeworld
 373 #
 374 # Distributes everything compiled by a `buildworld'.
 375 #
 376 # installworld
 377 #
 378 # Installs everything compiled by a 'buildworld'.
 379 #
 380 distributeworld installworld: installcheck
 381         mkdir -p ${INSTALLTMP}
 382         for prog in [ awk cap_mkdb cat chflags chmod chown \
 383             date echo egrep find grep \
 384             ln make makewhatis mkdir mtree mv perl pwd_mkdb rm sed sh sysctl \
 385             test true uname wc zic; do \
 386                 cp `which $$prog` ${INSTALLTMP}; \
 387         done
 388         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 389         rm -rf ${INSTALLTMP}
 390
 391 #
 392 # reinstall
 393 #
 394 # If you have a build server, you can NFS mount the source and obj directories
 395 # and do a 'make reinstall' on the *client* to install new binaries from the
 396 # most recent server build.
 397 #
 398 reinstall:
 399         @echo "--------------------------------------------------------------"
 400         @echo ">>> Making hierarchy"
 401         @echo "--------------------------------------------------------------"
 402         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 403         @echo
 404         @echo "--------------------------------------------------------------"
 405         @echo ">>> Installing everything.."
 406         @echo "--------------------------------------------------------------"
 407         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 408 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 409         @echo
 410         @echo "--------------------------------------------------------------"
 411         @echo ">>> Rebuilding man page indices"
 412         @echo "--------------------------------------------------------------"
 413         cd ${.CURDIR}/share/man; ${MAKE} makedb
 414 .endif
 415
 416 redistribute:
 417         @echo "--------------------------------------------------------------"
 418         @echo ">>> Distributing everything.."
 419         @echo "--------------------------------------------------------------"
 420         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 421
 422 #
 423 # buildkernel and installkernel
 424 #
 425 # Which kernels to build and/or install is specified by setting
 426 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 427 # Only the existing (depending TARGET) config files are used
 428 # for building kernels and only the first of these is designated
 429 # as the one being installed.
 430 #
 431 # Note that we have to use TARGET instead of TARGET_ARCH when
 432 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 433 # be set to cross-build, we have to make sure TARGET is set
 434 # properly.
 435
 436 .if !defined(KERNCONF) && defined(KERNEL)
 437 KERNCONF=       ${KERNEL}
 438 KERNWARN=       yes
 439 .else
 440 KERNCONF?=      GENERIC
 441 .endif
 442 INSTKERNNAME?=  kernel
 443
 444 KRNLSRCDIR=     ${.CURDIR}/sys
 445 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
 446 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 447 KERNCONFDIR?=   ${KRNLCONFDIR}
 448
 449 BUILDKERNELS=
 450 INSTALLKERNEL=
 451 .for _kernel in ${KERNCONF}
 452 .if exists(${KERNCONFDIR}/${_kernel})
 453 BUILDKERNELS+=  ${_kernel}
 454 .if empty(INSTALLKERNEL)
 455 INSTALLKERNEL= ${_kernel}
 456 .endif
 457 .endif
 458 .endfor
 459
 460 #
 461 # buildkernel
 462 #
 463 # Builds all kernels defined by BUILDKERNELS.
 464 #
 465 buildkernel:
 466 .if empty(BUILDKERNELS)
 467         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 468         @false
 469 .endif
 470 .if defined(KERNWARN)
 471         @echo "--------------------------------------------------------------"
 472         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 473         @echo "--------------------------------------------------------------"
 474         @sleep 3
 475 .endif
 476         @echo
 477 .for _kernel in ${BUILDKERNELS}
 478         @echo "--------------------------------------------------------------"
 479         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 480         @echo "--------------------------------------------------------------"
 481         @echo "===> ${_kernel}"
 482         mkdir -p ${KRNLOBJDIR}
 483 .if !defined(NO_KERNELCONFIG)
 484         cd ${KRNLCONFDIR}; \
 485                 PATH=${TMPPATH} \
 486                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 487                         ${KERNCONFDIR}/${_kernel}
 488 .endif
 489 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 490         cd ${KRNLOBJDIR}/${_kernel}; \
 491             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
 492 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
 493         cd ${KRNLOBJDIR}/${_kernel}; \
 494             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
 495 .endif
 496 .endif
 497         cd ${KRNLOBJDIR}/${_kernel}; \
 498             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 499             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 500 .if !defined(NO_KERNELDEPEND)
 501         cd ${KRNLOBJDIR}/${_kernel}; \
 502             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 503 .endif
 504         cd ${KRNLOBJDIR}/${_kernel}; \
 505             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 506         @echo "--------------------------------------------------------------"
 507         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 508         @echo "--------------------------------------------------------------"
 509 .endfor
 510
 511 #
 512 # installkernel
 513 #
 514 # Install the kernel defined by INSTALLKERNEL
 515 #
 516 installkernel reinstallkernel:
 517         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 518             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 519
 520 #
 521 # update
 522 #
 523 # Update the source tree, by running sup and/or running cvs to update to the
 524 # latest copy.
 525 #
 526 update:
 527 .if defined(SUP_UPDATE)
 528         @echo "--------------------------------------------------------------"
 529         @echo ">>> Running ${SUP}"
 530         @echo "--------------------------------------------------------------"
 531 .if defined(SUPFILE)
 532         @${SUP} ${SUPFLAGS} ${SUPFILE}
 533 .endif
 534 .if defined(SUPFILE1)
 535         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 536 .endif
 537 .if defined(SUPFILE2)
 538         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 539 .endif
 540 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 541         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 542 .endif
 543 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 544         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 545 .endif
 546 .endif
 547 .if defined(CVS_UPDATE)
 548         @echo "--------------------------------------------------------------"
 549         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 550         @echo "--------------------------------------------------------------"
 551         cd ${.CURDIR}; cvs -q update -rRELENG_4 -P -d
 552 .endif
 553
 554 #
 555 # most
 556 #
 557 # Build most of the user binaries on the existing system libs and includes.
 558 #
 559 most:
 560         @echo "--------------------------------------------------------------"
 561         @echo ">>> Building programs only"
 562         @echo "--------------------------------------------------------------"
 563 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 564         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 565 .endfor
 566
 567 #
 568 # installmost
 569 #
 570 # Install the binaries built by the 'most' target.  This does not include
 571 # libraries or include files.
 572 #
 573 installmost:
 574         @echo "--------------------------------------------------------------"
 575         @echo ">>> Installing programs only"
 576         @echo "--------------------------------------------------------------"
 577 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 578         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 579 .endfor
 580
 581 #
 582 # ------------------------------------------------------------------------
 583 #
 584 # From here onwards are utility targets used by the 'make world' and
 585 # related targets.  If your 'world' breaks, you may like to try to fix
 586 # the problem and manually run the following targets to attempt to
 587 # complete the build.  Beware, this is *not* guaranteed to work, you
 588 # need to have a pretty good grip on the current state of the system
 589 # to attempt to manually finish it.  If in doubt, 'make world' again.
 590 #
 591
 592 # bootstrap-tools: Build tools needed for compatibility
 593 #
 594 # [x]install:   dependancies on various new install features
 595 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 596 #               envs are not compatible with older objformat binaries.
 597 #
 598 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 599 _strfile=       games/fortune/strfile
 600 .endif
 601
 602 bootstrap-tools:
 603 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \
 604     usr.bin/uudecode usr.bin/xinstall usr.bin/rpcgen \
 605     usr.sbin/config \
 606     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
 607         ${ECHODIR} "===> ${_tool}"; \
 608                 cd ${.CURDIR}/${_tool}; \
 609                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 610                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 611                 ${MAKE} DIRPRFX=${_tool}/ all; \
 612                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
 613 .endfor
 614
 615 # build-tools: Build special purpose build tools.  gcc2 related tools are
 616 # only built under the i386 architecture.  Other architectures are
 617 # gcc3-only.
 618 #
 619 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 620 _games= games/adventure games/hack games/phantasia
 621 .endif
 622
 623 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 624 _share= share/syscons/scrnmaps
 625 .endif
 626
 627 _gcc3_cross= gnu/usr.bin/cc3
 628 _gcc3_tools= gnu/usr.bin/cc3/cc_tools
 629 .if ${MACHINE_ARCH} == "i386" && ${TARGET_ARCH} == "i386"
 630 _gcc2_cross= gnu/usr.bin/cc
 631 _gcc2_tools= gnu/usr.bin/cc/cc_tools
 632 _binutils= gnu/usr.bin/binutils gnu/usr.bin/binutils214
 633 .else
 634 _binutils= gnu/usr.bin/binutils214
 635 .endif
 636
 637 .if !defined(NO_FORTRAN)
 638 .if ${TARGET_ARCH} == "i386"
 639 _fortran= gnu/usr.bin/cc/f771
 640 .else
 641 _fortran= gnu/usr.bin/cc3/f771
 642 .endif
 643 .endif
 644
 645 .if !defined(NOPERL)
 646 _perl=  gnu/usr.bin/perl/miniperl
 647 .endif
 648
 649 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 650     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 651 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
 652     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 653 .endif
 654
 655 .if defined(RELEASEDIR)
 656 _sysinstall= release/sysinstall
 657 .endif
 658
 659 # build-tools: tools we need
 660 #
 661 build-tools:
 662 .for _tool in bin/csh bin/sh ${_games} ${_gcc2_tools} ${_gcc3_tools} \
 663               ${_fortran} ${_perl} ${_libroken4} ${_libkrb5} \
 664               lib/libncurses ${_share} usr.bin/awk usr.bin/file \
 665               ${_sysinstall}
 666         ${ECHODIR} "===> ${_tool}"; \
 667                 cd ${.CURDIR}/${_tool}; \
 668                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 669                 ${MAKE} DIRPRFX=${_tool}/ build-tools
 670 .endfor
 671
 672 #
 673 # cross-tools: Build cross-building tools
 674 #
 675 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
 676 _elf2exe=       usr.sbin/elf2exe
 677 .endif
 678
 679 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 680 _btxld= usr.sbin/btxld
 681 .endif
 682
 683 cross-tools:
 684 .for _tool in ${_btxld} ${_elf2exe} ${_binutils} \
 685               usr.bin/objformat usr.sbin/crunch/crunchide \
 686               ${_gcc2_cross} ${_gcc3_cross}
 687         ${ECHODIR} "===> ${_tool}"; \
 688                 cd ${.CURDIR}/${_tool}; \
 689                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 690                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 691                 ${MAKE} DIRPRFX=${_tool}/ all; \
 692                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
 693 .endfor
 694
 695 #
 696 # hierarchy - ensure that all the needed directories are present
 697 #
 698 hierarchy:
 699         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 700
 701 #
 702 # libraries - build all libraries, and install them under ${DESTDIR}.
 703 #
 704 # The list of libraries with dependents (${_prebuild_libs}) and their
 705 # interdependencies (__L) are built automatically by the
 706 # ${.CURDIR}/tools/make_libdeps.sh script.
 707 #
 708 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
 709 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
 710 #
 711 libraries:
 712         cd ${.CURDIR}; \
 713             CCVER=gcc2 ${MAKE} -f Makefile.inc1 _startup_libs2; \
 714             CCVER=gcc3 ${MAKE} -f Makefile.inc1 _startup_libs3; \
 715             ${MAKE} -f Makefile.inc1 _startup_libs; \
 716             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 717             ${MAKE} -f Makefile.inc1 _generic_libs;
 718
 719 # These dependencies are not automatically generated:
 720 #
 721 # gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
 722 # shared libraries for ELF.  The targets for _startup_libs{2,3} are
 723 # specifically built using gcc{2,3}.
 724 #
 725 _startup_libs2= gnu/lib/gcc2/csu gnu/lib/gcc2/libgcc
 726 _startup_libs3= gnu/lib/gcc3/csu gnu/lib/gcc3/libgcc
 727 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
 728 _startup_libs=  lib/csu/${MACHINE_ARCH}-elf
 729 .else
 730 _startup_libs=  lib/csu/${MACHINE_ARCH}
 731 .endif
 732
 733 _prebuild_libs=
 734
 735 _generic_libs=  gnu/lib
 736
 737 .if !defined(NOPERL)
 738 _generic_libs+= gnu/usr.bin/perl/libperl
 739 .endif
 740
 741 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 742 _prebuild_libs+=        kerberos5/lib/libasn1
 743 _prebuild_libs+=        kerberos5/lib/libgssapi
 744 _prebuild_libs+=        kerberos5/lib/libkrb5
 745 _prebuild_libs+=        kerberos5/lib/libroken
 746 _generic_libs+= kerberos5/lib
 747 .endif
 748
 749 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
 750                 lib/libncurses lib/libopie lib/libradius lib/libskey \
 751                 lib/libtacplus lib/libutil \
 752                 lib/libz lib/msun
 753
 754 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 755 lib/libskey__L: lib/libcrypt__L lib/libmd__L
 756
 757 _generic_libs+= lib
 758
 759 .if !defined(NOCRYPT)
 760 .if !defined(NO_OPENSSL)
 761 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 762 .if !defined(NO_OPENSSH)
 763 _prebuild_libs+=        secure/lib/libssh
 764 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 765 .endif
 766 .endif
 767 _generic_libs+= secure/lib
 768 .endif
 769
 770 _generic_libs+= usr.bin/lex/lib
 771
 772 .if ${MACHINE_ARCH} == "i386"
 773 _generic_libs+= usr.sbin/pcvt/keycap
 774 .endif
 775
 776 .for _lib in ${_startup_libs2} ${_startup_libs3} ${_startup_libs} \
 777                 ${_prebuild_libs} ${_generic_libs}
 778 ${_lib}__L: .PHONY
 779 .if exists(${.CURDIR}/${_lib})
 780         ${ECHODIR} "===> ${_lib}"; \
 781                 cd ${.CURDIR}/${_lib}; \
 782                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 783                 ${MAKE} DIRPRFX=${_lib}/ all; \
 784                 ${MAKE} DIRPRFX=${_lib}/ install
 785 .endif
 786 .endfor
 787
 788 # only mess with gcc2 for i386 architectures.
 789 #
 790 _startup_libs: ${_startup_libs:S/$/__L/}
 791 .if ${TARGET_ARCH} == "i386"
 792 _startup_libs2: ${_startup_libs2:S/$/__L/}
 793 .else
 794 _startup_libs2:
 795 .endif
 796 _startup_libs3: ${_startup_libs3:S/$/__L/}
 797 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 798 _generic_libs: ${_generic_libs:S/$/__L/}
 799
 800 .for __target in clean cleandepend cleandir depend includes obj
 801 .for entry in ${SUBDIR}
 802 ${entry}.${__target}__D: .PHONY
 803         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 804                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 805                 edir=${entry}.${MACHINE_ARCH}; \
 806                 cd ${.CURDIR}/$${edir}; \
 807         else \
 808                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 809                 edir=${entry}; \
 810                 cd ${.CURDIR}/$${edir}; \
 811         fi; \
 812         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 813 .endfor
 814 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 815 .endfor
 816
 817 # The wmake target is used by /usr/bin/wmake to run make in a
 818 # world build environment.
 819 #
 820 wmake:
 821         @echo '${WMAKEENV} ${MAKE} ${WMAKE_ARGS}'
 822
 823 wmakeenv:
 824         @echo '${WMAKEENV} /bin/sh'
 825
 826 bmakeenv:
 827         @echo '${BMAKEENV} /bin/sh'
 828
 829 tmakeenv:
 830         @echo '${TMAKEENV} /bin/sh'
 831
 832 .include <bsd.subdir.mk>
 833