Merge branch 'vendor/MDOCML'

[dragonfly.git] / sys / kern / vfs_cluster.c

/*-
 * Copyright (c) 1993
 *      The Regents of the University of California.  All rights reserved.
 * Modifications/enhancements:
 *      Copyright (c) 1995 John S. Dyson.  All rights reserved.
 *      Copyright (c) 2012-2013 Matthew Dillon.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include "opt_debug_cluster.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <sys/buf.h>
#include <sys/vnode.h>
#include <sys/malloc.h>
#include <sys/mount.h>
#include <sys/resourcevar.h>
#include <sys/vmmeter.h>
#include <vm/vm.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <sys/sysctl.h>

#include <sys/buf2.h>
#include <vm/vm_page2.h>

#include <machine/limits.h>

/*
 * Cluster tracking cache - replaces the original vnode v_* fields which had
 * limited utility and were not MP safe.
 *
 * The cluster tracking cache is a simple 4-way set-associative non-chained
 * cache.  It is capable of tracking up to four zones separated by 1MB or
 * more per vnode.
 *
 * NOTE: We want this structure to be cache-line friendly so the iterator
 *       is embedded rather than in a separate array.
 *
 * NOTE: A cluster cache entry can become stale when a vnode is recycled.
 *       For now we treat the values as heuristical but also self-consistent.
 *       i.e. the values cannot be completely random and cannot be SMP unsafe
 *       or the cluster code might end-up clustering non-contiguous buffers
 *       at the wrong offsets.
 */
struct cluster_cache {
        struct vnode *vp;
        u_int   locked;
        off_t   v_lastw;                /* last write (end) (write cluster) */
        off_t   v_cstart;               /* start block (beg) of cluster */
        off_t   v_lasta;                /* last allocation (end) */
        u_int   v_clen;                 /* length of current cluster */
        u_int   iterator;
} __cachealign;

typedef struct cluster_cache cluster_cache_t;

#define CLUSTER_CACHE_SIZE      512
#define CLUSTER_CACHE_MASK      (CLUSTER_CACHE_SIZE - 1)

#define CLUSTER_ZONE            ((off_t)(1024 * 1024))

cluster_cache_t cluster_array[CLUSTER_CACHE_SIZE];

#if defined(CLUSTERDEBUG)
static int      rcluster= 0;
SYSCTL_INT(_debug, OID_AUTO, rcluster, CTLFLAG_RW, &rcluster, 0, "");
#endif

static MALLOC_DEFINE(M_SEGMENT, "cluster_save", "cluster_save buffer");

static struct cluster_save *
        cluster_collectbufs (cluster_cache_t *cc, struct vnode *vp,
                                struct buf *last_bp, int blksize);
static struct buf *
        cluster_rbuild (struct vnode *vp, off_t filesize, off_t loffset,
                            off_t doffset, int blksize, int run, 
                            struct buf *fbp, int *srp);
static void cluster_callback (struct bio *);
static void cluster_setram (struct buf *);
static void cluster_clrram (struct buf *);
static int cluster_wbuild(struct vnode *vp, struct buf **bpp, int blksize,
                            off_t start_loffset, int bytes);

static int write_behind = 1;
SYSCTL_INT(_vfs, OID_AUTO, write_behind, CTLFLAG_RW, &write_behind, 0,
    "Cluster write-behind setting");
static quad_t write_behind_minfilesize = 10 * 1024 * 1024;
SYSCTL_QUAD(_vfs, OID_AUTO, write_behind_minfilesize, CTLFLAG_RW,
    &write_behind_minfilesize, 0, "Cluster write-behind setting");
static int max_readahead = 2 * 1024 * 1024;
SYSCTL_INT(_vfs, OID_AUTO, max_readahead, CTLFLAG_RW, &max_readahead, 0,
    "Limit in bytes for desired cluster read-ahead");

extern vm_page_t        bogus_page;

/*
 * nblks is our cluster_rbuild request size.  The approximate number of
 * physical read-ahead requests is maxra / nblks.  The physical request
 * size is limited by the device (maxrbuild).  We also do not want to make
 * the request size too big or it will mess up the B_RAM streaming.
 */
static __inline
int
calc_rbuild_reqsize(int maxra, int maxrbuild)
{
        int nblks;

        if ((nblks = maxra / 4) > maxrbuild)
                nblks = maxrbuild;
        if (nblks < 1)
                nblks = maxra;
        return nblks;
}

/*
 * Acquire/release cluster cache (can return dummy entry)
 */
static
cluster_cache_t *
cluster_getcache(cluster_cache_t *dummy, struct vnode *vp, off_t loffset)
{
        cluster_cache_t *cc;
        size_t hv;
        int i;
        int xact;

        hv = (size_t)(intptr_t)vp ^ (size_t)(intptr_t)vp / sizeof(*vp);
        hv &= CLUSTER_CACHE_MASK & ~3;
        cc = &cluster_array[hv];

        xact = -1;
        for (i = 0; i < 4; ++i) {
                if (cc[i].vp != vp)
                        continue;
                if (((cc[i].v_cstart ^ loffset) & ~(CLUSTER_ZONE - 1)) == 0) {
                        xact = i;
                        break;
                }
        }
        if (xact >= 0 && atomic_swap_int(&cc[xact].locked, 1) == 0) {
                if (cc[xact].vp == vp &&
                    ((cc[i].v_cstart ^ loffset) & ~(CLUSTER_ZONE - 1)) == 0) {
                        return(&cc[xact]);
                }
                atomic_swap_int(&cc[xact].locked, 0);
        }

        /*
         * New entry.  If we can't acquire the cache line then use the
         * passed-in dummy element and reset all fields.
         *
         * When we are able to acquire the cache line we only clear the
         * fields if the vp does not match.  This allows us to multi-zone
         * a vp and for excessive zones / partial clusters to be retired.
         */
        i = cc->iterator++ & 3;
        cc += i;
        if (atomic_swap_int(&cc->locked, 1) != 0) {
                cc = dummy;
                cc->locked = 1;
                cc->vp = NULL;
        }
        if (cc->vp != vp) {
                cc->vp = vp;
                cc->v_lasta = 0;
                cc->v_clen = 0;
                cc->v_cstart = 0;
                cc->v_lastw = 0;
        }
        return(cc);
}

static
void
cluster_putcache(cluster_cache_t *cc)
{
        atomic_swap_int(&cc->locked, 0);
}

/*
 * This replaces bread(), providing a synchronous read of the requested
 * buffer plus asynchronous read-ahead within the specified bounds.
 *
 * The caller may pre-populate *bpp if it already has the requested buffer
 * in-hand, else must set *bpp to NULL.  Note that the cluster_read() inline
 * sets *bpp to NULL and then calls cluster_readx() for compatibility.
 *
 * filesize     - read-ahead @ blksize will not cross this boundary
 * loffset      - loffset for returned *bpp
 * blksize      - blocksize for returned *bpp and read-ahead bps
 * minreq       - minimum (not a hard minimum) in bytes, typically reflects
 *                a higher level uio resid.
 * maxreq       - maximum (sequential heuristic) in bytes (highet typ ~2MB)
 * bpp          - return buffer (*bpp) for (loffset,blksize)
 */
int
cluster_readx(struct vnode *vp, off_t filesize, off_t loffset, int blksize,
              int bflags, size_t minreq, size_t maxreq,
              struct buf **bpp)
{
        struct buf *bp, *rbp, *reqbp;
        off_t origoffset;
        off_t doffset;
        int error;
        int i;
        int maxra;
        int maxrbuild;
        int sr;
        int blkflags = (bflags & B_KVABIO) ? GETBLK_KVABIO : 0;

        sr = 0;

        /*
         * Calculate the desired read-ahead in blksize'd blocks (maxra).
         * To do this we calculate maxreq.
         *
         * maxreq typically starts out as a sequential heuristic.  If the
         * high level uio/resid is bigger (minreq), we pop maxreq up to
         * minreq.  This represents the case where random I/O is being
         * performed by the userland is issuing big read()'s.
         *
         * Then we limit maxreq to max_readahead to ensure it is a reasonable
         * value.
         *
         * Finally we must ensure that (loffset + maxreq) does not cross the
         * boundary (filesize) for the current blocksize.  If we allowed it
         * to cross we could end up with buffers past the boundary with the
         * wrong block size (HAMMER large-data areas use mixed block sizes).
         * minreq is also absolutely limited to filesize.
         */
        if (maxreq < minreq)
                maxreq = minreq;
        /* minreq not used beyond this point */

        if (maxreq > max_readahead) {
                maxreq = max_readahead;
                if (maxreq > 16 * 1024 * 1024)
                        maxreq = 16 * 1024 * 1024;
        }
        if (maxreq < blksize)
                maxreq = blksize;
        if (loffset + maxreq > filesize) {
                if (loffset > filesize)
                        maxreq = 0;
                else
                        maxreq = filesize - loffset;
        }

        maxra = (int)(maxreq / blksize);

        /*
         * Get the requested block.
         */
        if (*bpp)
                reqbp = bp = *bpp;
        else
                *bpp = reqbp = bp = getblk(vp, loffset, blksize, blkflags, 0);
        origoffset = loffset;

        /*
         * Calculate the maximum cluster size for a single I/O, used
         * by cluster_rbuild().
         */
        maxrbuild = vmaxiosize(vp) / blksize;

        /*
         * If it is in the cache, then check to see if the reads have been
         * sequential.  If they have, then try some read-ahead, otherwise
         * back-off on prospective read-aheads.
         */
        if (bp->b_flags & B_CACHE) {
                /*
                 * Not sequential, do not do any read-ahead
                 */
                if (maxra <= 1)
                        return 0;

                /*
                 * No read-ahead mark, do not do any read-ahead
                 * yet.
                 */
                if ((bp->b_flags & B_RAM) == 0)
                        return 0;

                /*
                 * We hit a read-ahead-mark, figure out how much read-ahead
                 * to do (maxra) and where to start (loffset).
                 *
                 * Typically the way this works is that B_RAM is set in the
                 * middle of the cluster and triggers an overlapping
                 * read-ahead of 1/2 a cluster more blocks.  This ensures
                 * that the cluster read-ahead scales with the read-ahead
                 * count and is thus better-able to absorb the caller's
                 * latency.
                 *
                 * Estimate where the next unread block will be by assuming
                 * that the B_RAM's are placed at the half-way point.
                 */
                bp->b_flags &= ~B_RAM;

                i = maxra / 2;
                rbp = findblk(vp, loffset + i * blksize, FINDBLK_TEST);
                if (rbp == NULL || (rbp->b_flags & B_CACHE) == 0) {
                        while (i) {
                                --i;
                                rbp = findblk(vp, loffset + i * blksize,
                                              FINDBLK_TEST);
                                if (rbp) {
                                        ++i;
                                        break;
                                }
                        }
                } else {
                        while (i < maxra) {
                                rbp = findblk(vp, loffset + i * blksize,
                                              FINDBLK_TEST);
                                if (rbp == NULL)
                                        break;
                                ++i;
                        }
                }

                /*
                 * We got everything or everything is in the cache, no
                 * point continuing.
                 */
                if (i >= maxra)
                        return 0;

                /*
                 * Calculate where to start the read-ahead and how much
                 * to do.  Generally speaking we want to read-ahead by
                 * (maxra) when we've found a read-ahead mark.  We do
                 * not want to reduce maxra here as it will cause
                 * successive read-ahead I/O's to be smaller and smaller.
                 *
                 * However, we have to make sure we don't break the
                 * filesize limitation for the clustered operation.
                 */
                loffset += i * blksize;
                reqbp = bp = NULL;

                if (loffset >= filesize)
                        return 0;
                if (loffset + maxra * blksize > filesize) {
                        maxreq = filesize - loffset;
                        maxra = (int)(maxreq / blksize);
                }

                /*
                 * Set RAM on first read-ahead block since we still have
                 * approximate maxra/2 blocks ahead of us that are already
                 * cached or in-progress.
                 */
                sr = 1;
        } else {
                /*
                 * Start block is not valid, we will want to do a
                 * full read-ahead.
                 */
                __debugvar off_t firstread = bp->b_loffset;
                int nblks;

                /*
                 * Set-up synchronous read for bp.
                 */
                bp->b_cmd = BUF_CMD_READ;
                bp->b_bio1.bio_done = biodone_sync;
                bp->b_bio1.bio_flags |= BIO_SYNC;

                KASSERT(firstread != NOOFFSET, 
                        ("cluster_read: no buffer offset"));

                nblks = calc_rbuild_reqsize(maxra, maxrbuild);

                /*
                 * Set RAM half-way through the full-cluster.
                 */
                sr = (maxra + 1) / 2;

                if (nblks > 1) {
                        int burstbytes;

                        error = VOP_BMAP(vp, loffset, &doffset,
                                         &burstbytes, NULL, BUF_CMD_READ);
                        if (error)
                                goto single_block_read;
                        if (nblks > burstbytes / blksize)
                                nblks = burstbytes / blksize;
                        if (doffset == NOOFFSET)
                                goto single_block_read;
                        if (nblks <= 1)
                                goto single_block_read;

                        bp = cluster_rbuild(vp, filesize, loffset,
                                            doffset, blksize, nblks, bp, &sr);
                        loffset += bp->b_bufsize;
                        maxra -= bp->b_bufsize / blksize;
                } else {
single_block_read:
                        /*
                         * If it isn't in the cache, then get a chunk from
                         * disk if sequential, otherwise just get the block.
                         */
                        loffset += blksize;
                        --maxra;
                }
        }

        /*
         * If B_CACHE was not set issue bp.  bp will either be an
         * asynchronous cluster buf or a synchronous single-buf.
         * If it is a single buf it will be the same as reqbp.
         *
         * NOTE: Once an async cluster buf is issued bp becomes invalid.
         */
        if (bp) {
#if defined(CLUSTERDEBUG)
                if (rcluster)
                        kprintf("S(%012jx,%d,%d)\n",
                            (intmax_t)bp->b_loffset, bp->b_bcount, maxra);
#endif
                if ((bp->b_flags & B_CLUSTER) == 0)
                        vfs_busy_pages(vp, bp);
                bp->b_flags &= ~(B_ERROR | B_INVAL | B_NOTMETA);
                bp->b_flags |= bflags;
                vn_strategy(vp, &bp->b_bio1);
                /* bp invalid now */
                bp = NULL;
        }

#if defined(CLUSTERDEBUG)
        if (rcluster)
                kprintf("cluster_rd %016jx/%d maxra=%d sr=%d\n",
                        loffset, blksize, maxra, sr);
#endif

        /*
         * If we have been doing sequential I/O, then do some read-ahead.
         * The code above us should have positioned us at the next likely
         * offset.
         *
         * Only mess with buffers which we can immediately lock.  HAMMER
         * will do device-readahead irrespective of what the blocks
         * represent.
         *
         * Set B_RAM on the first buffer (the next likely offset needing
         * read-ahead), under the assumption that there are still
         * approximately maxra/2 blocks good ahead of us.
         */
        while (maxra > 0) {
                int burstbytes;
                int nblks;

                rbp = getblk(vp, loffset, blksize,
                             GETBLK_SZMATCH | GETBLK_NOWAIT | GETBLK_KVABIO,
                             0);
#if defined(CLUSTERDEBUG)
                if (rcluster) {
                        kprintf("read-ahead %016jx rbp=%p ",
                                loffset, rbp);
                }
#endif
                if (rbp == NULL)
                        goto no_read_ahead;
                if ((rbp->b_flags & B_CACHE)) {
                        bqrelse(rbp);
                        goto no_read_ahead;
                }

                /*
                 * If BMAP is not supported or has an issue, we still do
                 * (maxra) read-ahead, but we do not try to use rbuild.
                 */
                error = VOP_BMAP(vp, loffset, &doffset,
                                 &burstbytes, NULL, BUF_CMD_READ);
                if (error || doffset == NOOFFSET) {
                        nblks = 1;
                        doffset = NOOFFSET;
                } else {
                        nblks = calc_rbuild_reqsize(maxra, maxrbuild);
                        if (nblks > burstbytes / blksize)
                                nblks = burstbytes / blksize;
                }
                rbp->b_cmd = BUF_CMD_READ;

                if (nblks > 1) {
                        rbp = cluster_rbuild(vp, filesize, loffset,
                                             doffset, blksize, 
                                             nblks, rbp, &sr);
                } else {
                        rbp->b_bio2.bio_offset = doffset;
                        if (--sr == 0)
                                cluster_setram(rbp);
                }

                rbp->b_flags &= ~(B_ERROR | B_INVAL | B_NOTMETA);
                rbp->b_flags |= bflags;

                if ((rbp->b_flags & B_CLUSTER) == 0)
                        vfs_busy_pages(vp, rbp);
                BUF_KERNPROC(rbp);
                loffset += rbp->b_bufsize;
                maxra -= rbp->b_bufsize / blksize;
                vn_strategy(vp, &rbp->b_bio1);
                /* rbp invalid now */
        }

        /*
         * Wait for our original buffer to complete its I/O.  reqbp will
         * be NULL if the original buffer was B_CACHE.  We are returning
         * (*bpp) which is the same as reqbp when reqbp != NULL.
         */
no_read_ahead:
        if (reqbp) {
                KKASSERT(reqbp->b_bio1.bio_flags & BIO_SYNC);
                error = biowait(&reqbp->b_bio1, "clurd");
        } else {
                error = 0;
        }
        return (error);
}

/*
 * This replaces breadcb(), providing an asynchronous read of the requested
 * buffer with a callback, plus an asynchronous read-ahead within the
 * specified bounds.
 *
 * The callback must check whether BIO_DONE is set in the bio and issue
 * the bpdone(bp, 0) if it isn't.  The callback is responsible for clearing
 * BIO_DONE and disposing of the I/O (bqrelse()ing it).
 *
 * filesize     - read-ahead @ blksize will not cross this boundary
 * loffset      - loffset for returned *bpp
 * blksize      - blocksize for returned *bpp and read-ahead bps
 * minreq       - minimum (not a hard minimum) in bytes, typically reflects
 *                a higher level uio resid.
 * maxreq       - maximum (sequential heuristic) in bytes (highet typ ~2MB)
 * bpp          - return buffer (*bpp) for (loffset,blksize)
 */
void
cluster_readcb(struct vnode *vp, off_t filesize, off_t loffset, int blksize,
               int bflags, size_t minreq, size_t maxreq,
               void (*func)(struct bio *), void *arg)
{
        struct buf *bp, *rbp, *reqbp;
        off_t origoffset;
        off_t doffset;
        int i;
        int maxra;
        int maxrbuild;
        int sr;
        int blkflags = (bflags & B_KVABIO) ? GETBLK_KVABIO : 0;

        sr = 0;

        /*
         * Calculate the desired read-ahead in blksize'd blocks (maxra).
         * To do this we calculate maxreq.
         *
         * maxreq typically starts out as a sequential heuristic.  If the
         * high level uio/resid is bigger (minreq), we pop maxreq up to
         * minreq.  This represents the case where random I/O is being
         * performed by the userland is issuing big read()'s.
         *
         * Then we limit maxreq to max_readahead to ensure it is a reasonable
         * value.
         *
         * Finally we must ensure that (loffset + maxreq) does not cross the
         * boundary (filesize) for the current blocksize.  If we allowed it
         * to cross we could end up with buffers past the boundary with the
         * wrong block size (HAMMER large-data areas use mixed block sizes).
         * minreq is also absolutely limited to filesize.
         */
        if (maxreq < minreq)
                maxreq = minreq;
        /* minreq not used beyond this point */

        if (maxreq > max_readahead) {
                maxreq = max_readahead;
                if (maxreq > 16 * 1024 * 1024)
                        maxreq = 16 * 1024 * 1024;
        }
        if (maxreq < blksize)
                maxreq = blksize;
        if (loffset + maxreq > filesize) {
                if (loffset > filesize)
                        maxreq = 0;
                else
                        maxreq = filesize - loffset;
        }

        maxra = (int)(maxreq / blksize);

        /*
         * Get the requested block.
         */
        reqbp = bp = getblk(vp, loffset, blksize, blkflags, 0);
        origoffset = loffset;

        /*
         * Calculate the maximum cluster size for a single I/O, used
         * by cluster_rbuild().
         */
        maxrbuild = vmaxiosize(vp) / blksize;

        /*
         * if it is in the cache, then check to see if the reads have been
         * sequential.  If they have, then try some read-ahead, otherwise
         * back-off on prospective read-aheads.
         */
        if (bp->b_flags & B_CACHE) {
                /*
                 * Setup for func() call whether we do read-ahead or not.
                 */
                bp->b_bio1.bio_caller_info1.ptr = arg;
                bp->b_bio1.bio_flags |= BIO_DONE;

                /*
                 * Not sequential, do not do any read-ahead
                 */
                if (maxra <= 1)
                        goto no_read_ahead;

                /*
                 * No read-ahead mark, do not do any read-ahead
                 * yet.
                 */
                if ((bp->b_flags & B_RAM) == 0)
                        goto no_read_ahead;
                bp->b_flags &= ~B_RAM;

                /*
                 * We hit a read-ahead-mark, figure out how much read-ahead
                 * to do (maxra) and where to start (loffset).
                 *
                 * Shortcut the scan.  Typically the way this works is that
                 * we've built up all the blocks inbetween except for the
                 * last in previous iterations, so if the second-to-last
                 * block is present we just skip ahead to it.
                 *
                 * This algorithm has O(1) cpu in the steady state no
                 * matter how large maxra is.
                 */
                if (findblk(vp, loffset + (maxra - 2) * blksize, FINDBLK_TEST))
                        i = maxra - 1;
                else
                        i = 1;
                while (i < maxra) {
                        if (findblk(vp, loffset + i * blksize,
                                    FINDBLK_TEST) == NULL) {
                                break;
                        }
                        ++i;
                }

                /*
                 * We got everything or everything is in the cache, no
                 * point continuing.
                 */
                if (i >= maxra)
                        goto no_read_ahead;

                /*
                 * Calculate where to start the read-ahead and how much
                 * to do.  Generally speaking we want to read-ahead by
                 * (maxra) when we've found a read-ahead mark.  We do
                 * not want to reduce maxra here as it will cause
                 * successive read-ahead I/O's to be smaller and smaller.
                 *
                 * However, we have to make sure we don't break the
                 * filesize limitation for the clustered operation.
                 */
                loffset += i * blksize;
                bp = NULL;
                /* leave reqbp intact to force function callback */

                if (loffset >= filesize)
                        goto no_read_ahead;
                if (loffset + maxra * blksize > filesize) {
                        maxreq = filesize - loffset;
                        maxra = (int)(maxreq / blksize);
                }
                sr = 1;
        } else {
                /*
                 * bp is not valid, no prior cluster in progress so get a
                 * full cluster read-ahead going.
                 */
                __debugvar off_t firstread = bp->b_loffset;
                int nblks;
                int error;

                /*
                 * Set-up synchronous read for bp.
                 */
                bp->b_flags &= ~(B_ERROR | B_EINTR | B_INVAL | B_NOTMETA);
                bp->b_flags |= bflags;
                bp->b_cmd = BUF_CMD_READ;
                bp->b_bio1.bio_done = func;
                bp->b_bio1.bio_caller_info1.ptr = arg;
                BUF_KERNPROC(bp);
                reqbp = NULL;   /* don't func() reqbp, it's running async */

                KASSERT(firstread != NOOFFSET,
                        ("cluster_read: no buffer offset"));

                /*
                 * nblks is our cluster_rbuild request size, limited
                 * primarily by the device.
                 */
                nblks = calc_rbuild_reqsize(maxra, maxrbuild);

                /*
                 * Set RAM half-way through the full-cluster.
                 */
                sr = (maxra + 1) / 2;

                if (nblks > 1) {
                        int burstbytes;

                        error = VOP_BMAP(vp, loffset, &doffset,
                                         &burstbytes, NULL, BUF_CMD_READ);
                        if (error)
                                goto single_block_read;
                        if (nblks > burstbytes / blksize)
                                nblks = burstbytes / blksize;
                        if (doffset == NOOFFSET)
                                goto single_block_read;
                        if (nblks <= 1)
                                goto single_block_read;

                        bp = cluster_rbuild(vp, filesize, loffset,
                                            doffset, blksize, nblks, bp, &sr);
                        loffset += bp->b_bufsize;
                        maxra -= bp->b_bufsize / blksize;
                } else {
single_block_read:
                        /*
                         * If it isn't in the cache, then get a chunk from
                         * disk if sequential, otherwise just get the block.
                         */
                        loffset += blksize;
                        --maxra;
                }
        }

        /*
         * If bp != NULL then B_CACHE was *NOT* set and bp must be issued.
         * bp will either be an asynchronous cluster buf or an asynchronous
         * single-buf.
         *
         * NOTE: Once an async cluster buf is issued bp becomes invalid.
         */
        if (bp) {
#if defined(CLUSTERDEBUG)
                if (rcluster)
                        kprintf("S(%012jx,%d,%d)\n",
                            (intmax_t)bp->b_loffset, bp->b_bcount, maxra);
#endif
                if ((bp->b_flags & B_CLUSTER) == 0)
                        vfs_busy_pages(vp, bp);
                bp->b_flags &= ~(B_ERROR | B_INVAL | B_NOTMETA);
                bp->b_flags |= bflags;
                vn_strategy(vp, &bp->b_bio1);
                /* bp invalid now */
                bp = NULL;
        }

#if defined(CLUSTERDEBUG)
        if (rcluster)
                kprintf("cluster_rd %016jx/%d maxra=%d sr=%d\n",
                        loffset, blksize, maxra, sr);
#endif

        /*
         * If we have been doing sequential I/O, then do some read-ahead.
         * The code above us should have positioned us at the next likely
         * offset.
         *
         * Only mess with buffers which we can immediately lock.  HAMMER
         * will do device-readahead irrespective of what the blocks
         * represent.
         */
        while (maxra > 0) {
                int burstbytes;
                int error;
                int nblks;

                rbp = getblk(vp, loffset, blksize,
                             GETBLK_SZMATCH | GETBLK_NOWAIT | GETBLK_KVABIO,
                             0);
                if (rbp == NULL)
                        goto no_read_ahead;
                if ((rbp->b_flags & B_CACHE)) {
                        bqrelse(rbp);
                        goto no_read_ahead;
                }

                /*
                 * If BMAP is not supported or has an issue, we still do
                 * (maxra) read-ahead, but we do not try to use rbuild.
                 */
                error = VOP_BMAP(vp, loffset, &doffset,
                                 &burstbytes, NULL, BUF_CMD_READ);
                if (error || doffset == NOOFFSET) {
                        nblks = 1;
                        doffset = NOOFFSET;
                } else {
                        nblks = calc_rbuild_reqsize(maxra, maxrbuild);
                        if (nblks > burstbytes / blksize)
                                nblks = burstbytes / blksize;
                }
                rbp->b_cmd = BUF_CMD_READ;

                if (nblks > 1) {
                        rbp = cluster_rbuild(vp, filesize, loffset,
                                             doffset, blksize,
                                             nblks, rbp, &sr);
                } else {
                        rbp->b_bio2.bio_offset = doffset;
                        if (--sr == 0)
                                cluster_setram(rbp);
                }

                rbp->b_flags &= ~(B_ERROR | B_INVAL | B_NOTMETA);
                rbp->b_flags |= bflags;

                if ((rbp->b_flags & B_CLUSTER) == 0)
                        vfs_busy_pages(vp, rbp);
                BUF_KERNPROC(rbp);
                loffset += rbp->b_bufsize;
                maxra -= rbp->b_bufsize / blksize;
                vn_strategy(vp, &rbp->b_bio1);
                /* rbp invalid now */
        }

        /*
         * If reqbp is non-NULL it had B_CACHE set and we issue the
         * function callback synchronously.
         *
         * Note that we may start additional asynchronous I/O before doing
         * the func() callback for the B_CACHE case
         */
no_read_ahead:
        if (reqbp)
                func(&reqbp->b_bio1);
}

/*
 * If blocks are contiguous on disk, use this to provide clustered
 * read ahead.  We will read as many blocks as possible sequentially
 * and then parcel them up into logical blocks in the buffer hash table.
 *
 * This function either returns a cluster buf or it returns fbp.  fbp is
 * already expected to be set up as a synchronous or asynchronous request.
 *
 * If a cluster buf is returned it will always be async.
 *
 * (*srp) counts down original blocks to determine where B_RAM should be set.
 * Set B_RAM when *srp drops to 0.  If (*srp) starts at 0, B_RAM will not be
 * set on any buffer.  Make sure B_RAM is cleared on any other buffers to
 * prevent degenerate read-aheads from being generated.
 */
static struct buf *
cluster_rbuild(struct vnode *vp, off_t filesize, off_t loffset, off_t doffset,
               int blksize, int run, struct buf *fbp, int *srp)
{
        struct buf *bp, *tbp;
        off_t boffset;
        int i, j;
        int maxiosize = vmaxiosize(vp);

        /*
         * avoid a division
         */
        while (loffset + run * blksize > filesize) {
                --run;
        }

        tbp = fbp;
        tbp->b_bio2.bio_offset = doffset;
        if (((tbp->b_flags & B_VMIO) == 0) || (run <= 1)) {
                if (--*srp == 0)
                        cluster_setram(tbp);
                else
                        cluster_clrram(tbp);
                return tbp;
        }

        /*
         * Get a pbuf, limit cluster I/O on a per-device basis.  If
         * doing cluster I/O for a file, limit cluster I/O on a
         * per-mount basis.
         */
        if (vp->v_type == VCHR || vp->v_type == VBLK)
                bp = trypbuf_kva(&vp->v_pbuf_count);
        else
                bp = trypbuf_kva(&vp->v_mount->mnt_pbuf_count);

        if (bp == NULL)
                return tbp;

        /*
         * We are synthesizing a buffer out of vm_page_t's, but
         * if the block size is not page aligned then the starting
         * address may not be either.  Inherit the b_data offset
         * from the original buffer.
         */
        bp->b_vp = vp;
        bp->b_data = (char *)((vm_offset_t)bp->b_data |
                              ((vm_offset_t)tbp->b_data & PAGE_MASK));
        bp->b_flags |= B_CLUSTER | B_VMIO | B_KVABIO;
        bp->b_cmd = BUF_CMD_READ;
        bp->b_bio1.bio_done = cluster_callback;         /* default to async */
        bp->b_bio1.bio_caller_info1.cluster_head = NULL;
        bp->b_bio1.bio_caller_info2.cluster_tail = NULL;
        bp->b_loffset = loffset;
        bp->b_bio2.bio_offset = doffset;
        KASSERT(bp->b_loffset != NOOFFSET,
                ("cluster_rbuild: no buffer offset"));

        bp->b_bcount = 0;
        bp->b_bufsize = 0;
        bp->b_xio.xio_npages = 0;

        for (boffset = doffset, i = 0; i < run; ++i, boffset += blksize) {
                if (i) {
                        if ((bp->b_xio.xio_npages * PAGE_SIZE) +
                            round_page(blksize) > maxiosize) {
                                break;
                        }

                        /*
                         * Shortcut some checks and try to avoid buffers that
                         * would block in the lock.  The same checks have to
                         * be made again after we officially get the buffer.
                         */
                        tbp = getblk(vp, loffset + i * blksize, blksize,
                                     GETBLK_SZMATCH |
                                     GETBLK_NOWAIT |
                                     GETBLK_KVABIO,
                                     0);
                        if (tbp == NULL)
                                break;
                        for (j = 0; j < tbp->b_xio.xio_npages; j++) {
                                if (tbp->b_xio.xio_pages[j]->valid)
                                        break;
                        }
                        if (j != tbp->b_xio.xio_npages) {
                                bqrelse(tbp);
                                break;
                        }

                        /*
                         * Stop scanning if the buffer is fuly valid 
                         * (marked B_CACHE), or locked (may be doing a
                         * background write), or if the buffer is not
                         * VMIO backed.  The clustering code can only deal
                         * with VMIO-backed buffers.
                         */
                        if ((tbp->b_flags & (B_CACHE|B_LOCKED)) ||
                            (tbp->b_flags & B_VMIO) == 0 ||
                            (LIST_FIRST(&tbp->b_dep) != NULL &&
                             buf_checkread(tbp))
                        ) {
                                bqrelse(tbp);
                                break;
                        }

                        /*
                         * The buffer must be completely invalid in order to
                         * take part in the cluster.  If it is partially valid
                         * then we stop.
                         */
                        for (j = 0;j < tbp->b_xio.xio_npages; j++) {
                                if (tbp->b_xio.xio_pages[j]->valid)
                                        break;
                        }
                        if (j != tbp->b_xio.xio_npages) {
                                bqrelse(tbp);
                                break;
                        }

                        /*
                         * Depress the priority of buffers not explicitly
                         * requested.
                         */
                        /* tbp->b_flags |= B_AGE; */

                        /*
                         * Set the block number if it isn't set, otherwise
                         * if it is make sure it matches the block number we
                         * expect.
                         */
                        if (tbp->b_bio2.bio_offset == NOOFFSET) {
                                tbp->b_bio2.bio_offset = boffset;
                        } else if (tbp->b_bio2.bio_offset != boffset) {
                                brelse(tbp);
                                break;
                        }
                }

                /*
                 * Set B_RAM if (*srp) is 1.  B_RAM is only set on one buffer
                 * in the cluster, including potentially the first buffer
                 * once we start streaming the read-aheads.
                 */
                if (--*srp == 0)
                        cluster_setram(tbp);
                else
                        cluster_clrram(tbp);

                /*
                 * The passed-in tbp (i == 0) will already be set up for
                 * async or sync operation.  All other tbp's acquire in
                 * our loop are set up for async operation.
                 */
                tbp->b_cmd = BUF_CMD_READ;
                BUF_KERNPROC(tbp);
                cluster_append(&bp->b_bio1, tbp);
                for (j = 0; j < tbp->b_xio.xio_npages; ++j) {
                        vm_page_t m;

                        m = tbp->b_xio.xio_pages[j];
                        vm_page_busy_wait(m, FALSE, "clurpg");
                        vm_page_io_start(m);
                        vm_page_wakeup(m);
                        vm_object_pip_add(m->object, 1);
                        if ((bp->b_xio.xio_npages == 0) ||
                            (bp->b_xio.xio_pages[bp->b_xio.xio_npages-1] != m)) {
                                bp->b_xio.xio_pages[bp->b_xio.xio_npages] = m;
                                bp->b_xio.xio_npages++;
                        }
                        if ((m->valid & VM_PAGE_BITS_ALL) == VM_PAGE_BITS_ALL) {
                                tbp->b_xio.xio_pages[j] = bogus_page;
                                tbp->b_flags |= B_HASBOGUS;
                        }
                }
                /*
                 * XXX shouldn't this be += size for both, like in 
                 * cluster_wbuild()?
                 *
                 * Don't inherit tbp->b_bufsize as it may be larger due to
                 * a non-page-aligned size.  Instead just aggregate using
                 * 'size'.
                 */
                if (tbp->b_bcount != blksize)
                    kprintf("warning: tbp->b_bcount wrong %d vs %d\n", tbp->b_bcount, blksize);
                if (tbp->b_bufsize != blksize)
                    kprintf("warning: tbp->b_bufsize wrong %d vs %d\n", tbp->b_bufsize, blksize);
                bp->b_bcount += blksize;
                bp->b_bufsize += blksize;
        }

        /*
         * Fully valid pages in the cluster are already good and do not need
         * to be re-read from disk.  Replace the page with bogus_page
         */
        for (j = 0; j < bp->b_xio.xio_npages; j++) {
                if ((bp->b_xio.xio_pages[j]->valid & VM_PAGE_BITS_ALL) ==
                    VM_PAGE_BITS_ALL) {
                        bp->b_xio.xio_pages[j] = bogus_page;
                        bp->b_flags |= B_HASBOGUS;
                }
        }
        if (bp->b_bufsize > bp->b_kvasize) {
                panic("cluster_rbuild: b_bufsize(%d) > b_kvasize(%d)",
                    bp->b_bufsize, bp->b_kvasize);
        }
        pmap_qenter_noinval(trunc_page((vm_offset_t)bp->b_data),
                            (vm_page_t *)bp->b_xio.xio_pages,
                            bp->b_xio.xio_npages);
        BUF_KERNPROC(bp);
        return (bp);
}

/*
 * Cleanup after a clustered read or write.
 * This is complicated by the fact that any of the buffers might have
 * extra memory (if there were no empty buffer headers at allocbuf time)
 * that we will need to shift around.
 *
 * The returned bio is &bp->b_bio1
 */
static void
cluster_callback(struct bio *bio)
{
        struct buf *bp = bio->bio_buf;
        struct buf *tbp;
        struct buf *next;
        struct vnode *vp;
        int error = 0;
        int bpflags;

        /*
         * Must propogate errors to all the components.  A short read (EOF)
         * is a critical error.
         */
        if (bp->b_flags & B_ERROR) {
                error = bp->b_error;
        } else if (bp->b_bcount != bp->b_bufsize) {
                panic("cluster_callback: unexpected EOF on cluster %p!", bio);
        }

        pmap_qremove_noinval(trunc_page((vm_offset_t) bp->b_data),
                             bp->b_xio.xio_npages);

        /*
         * Retrieve the cluster head and dispose of the cluster buffer.
         * the vp is only valid while we hold one or more cluster elements,
         * so we have to do this before disposing of them.
         */
        tbp = bio->bio_caller_info1.cluster_head;
        bio->bio_caller_info1.cluster_head = NULL;
        bpflags = bp->b_flags;
        vp = bp->b_vp;
        bp->b_vp = NULL;

        if (vp->v_type == VCHR || vp->v_type == VBLK)
                relpbuf(bp, &vp->v_pbuf_count);
        else
                relpbuf(bp, &vp->v_mount->mnt_pbuf_count);
        bp = NULL;      /* SAFETY */

        /*
         * Move memory from the large cluster buffer into the component
         * buffers and mark IO as done on these.  Since the memory map
         * is the same, no actual copying is required.
         *
         * (And we already disposed of the larger cluster buffer)
         */
        while (tbp) {
                next = tbp->b_cluster_next;
                if (error) {
                        tbp->b_flags |= B_ERROR | B_IOISSUED;
                        tbp->b_error = error;
                } else {
                        tbp->b_dirtyoff = tbp->b_dirtyend = 0;
                        tbp->b_flags &= ~(B_ERROR | B_INVAL);
                        if (tbp->b_cmd == BUF_CMD_READ) {
                                tbp->b_flags = (tbp->b_flags & ~B_NOTMETA) |
                                               (bpflags & B_NOTMETA);
                        }
                        tbp->b_flags |= B_IOISSUED;

                        /*
                         * XXX the bdwrite()/bqrelse() issued during
                         * cluster building clears B_RELBUF (see bqrelse()
                         * comment).  If direct I/O was specified, we have
                         * to restore it here to allow the buffer and VM
                         * to be freed.
                         */
                        if (tbp->b_flags & B_DIRECT)
                                tbp->b_flags |= B_RELBUF;

                        /*
                         * XXX I think biodone() below will do this, but do
                         *     it here anyway for consistency.
                         */
                        if (tbp->b_cmd == BUF_CMD_WRITE)
                                bundirty(tbp);
                }
                biodone(&tbp->b_bio1);
                tbp = next;
        }
}

/*
 * Implement modified write build for cluster.
 *
 *      write_behind = 0        write behind disabled
 *      write_behind = 1        write behind normal (default)
 *      write_behind = 2        write behind backed-off
 *
 * In addition, write_behind is only activated for files that have
 * grown past a certain size (default 10MB).  Otherwise temporary files
 * wind up generating a lot of unnecessary disk I/O.
 */
static __inline int
cluster_wbuild_wb(struct vnode *vp, int blksize, off_t start_loffset, int len)
{
        int r = 0;

        switch(write_behind) {
        case 2:
                if (start_loffset < len)
                        break;
                start_loffset -= len;
                /* fall through */
        case 1:
                if (vp->v_filesize >= write_behind_minfilesize) {
                        r = cluster_wbuild(vp, NULL, blksize,
                                           start_loffset, len);
                }
                /* fall through */
        default:
                /* fall through */
                break;
        }
        return(r);
}

/*
 * Do clustered write for FFS.
 *
 * Three cases:
 *      1. Write is not sequential (write asynchronously)
 *      Write is sequential:
 *      2.      beginning of cluster - begin cluster
 *      3.      middle of a cluster - add to cluster
 *      4.      end of a cluster - asynchronously write cluster
 *
 * WARNING! vnode fields are not locked and must ONLY be used heuristically.
 */
void
cluster_write(struct buf *bp, off_t filesize, int blksize, int seqcount)
{
        struct vnode *vp;
        off_t loffset;
        int maxclen, cursize;
        int async;
        cluster_cache_t dummy;
        cluster_cache_t *cc;

        vp = bp->b_vp;
        if (vp->v_type == VREG)
                async = vp->v_mount->mnt_flag & MNT_ASYNC;
        else
                async = 0;
        loffset = bp->b_loffset;
        KASSERT(bp->b_loffset != NOOFFSET, 
                ("cluster_write: no buffer offset"));

        cc = cluster_getcache(&dummy, vp, loffset);

        /*
         * Initialize vnode to beginning of file.
         */
        if (loffset == 0)
                cc->v_lasta = cc->v_clen = cc->v_cstart = cc->v_lastw = 0;

        if (cc->v_clen == 0 || loffset != cc->v_lastw ||
            (bp->b_bio2.bio_offset != NOOFFSET &&
             (bp->b_bio2.bio_offset != cc->v_lasta))) {
                /*
                 * Next block is not logically sequential, or, if physical
                 * block offsets are available, not physically sequential.
                 *
                 * If physical block offsets are not available we only
                 * get here if we weren't logically sequential.
                 */
                maxclen = vmaxiosize(vp);
                if (cc->v_clen != 0) {
                        /*
                         * Next block is not sequential.
                         *
                         * If we are not writing at end of file, the process
                         * seeked to another point in the file since its last
                         * write, or we have reached our maximum cluster size,
                         * then push the previous cluster. Otherwise try
                         * reallocating to make it sequential.
                         *
                         * Change to algorithm: only push previous cluster if
                         * it was sequential from the point of view of the
                         * seqcount heuristic, otherwise leave the buffer 
                         * intact so we can potentially optimize the I/O
                         * later on in the buf_daemon or update daemon
                         * flush.
                         */
                        cursize = cc->v_lastw - cc->v_cstart;
                        if (bp->b_loffset + blksize < filesize ||
                            loffset != cc->v_lastw ||
                            cc->v_clen <= cursize) {
                                if (!async && seqcount > 0) {
                                        cluster_wbuild_wb(vp, blksize,
                                                cc->v_cstart, cursize);
                                }
                        } else {
                                struct buf **bpp, **endbp;
                                struct cluster_save *buflist;

                                buflist = cluster_collectbufs(cc, vp,
                                                              bp, blksize);
                                endbp = &buflist->bs_children
                                        [buflist->bs_nchildren - 1];
                                if (VOP_REALLOCBLKS(vp, buflist)) {
                                        /*
                                         * Failed, push the previous cluster
                                         * if *really* writing sequentially
                                         * in the logical file (seqcount > 1),
                                         * otherwise delay it in the hopes that
                                         * the low level disk driver can
                                         * optimize the write ordering.
                                         *
                                         * NOTE: We do not brelse the last
                                         *       element which is bp, and we
                                         *       do not return here.
                                         */
                                        for (bpp = buflist->bs_children;
                                             bpp < endbp; bpp++)
                                                brelse(*bpp);
                                        kfree(buflist, M_SEGMENT);
                                        if (seqcount > 1) {
                                                cluster_wbuild_wb(vp, 
                                                    blksize, cc->v_cstart,
                                                    cursize);
                                        }
                                } else {
                                        /*
                                         * Succeeded, keep building cluster.
                                         */
                                        for (bpp = buflist->bs_children;
                                             bpp <= endbp; bpp++)
                                                bdwrite(*bpp);
                                        kfree(buflist, M_SEGMENT);
                                        cc->v_lastw = loffset + blksize;
                                        cc->v_lasta = bp->b_bio2.bio_offset +
                                                      blksize;
                                        cluster_putcache(cc);
                                        return;
                                }
                        }
                }

                /*
                 * Consider beginning a cluster. If at end of file, make
                 * cluster as large as possible, otherwise find size of
                 * existing cluster.
                 */
                if ((vp->v_type == VREG) &&
                    bp->b_loffset + blksize < filesize &&
                    (bp->b_bio2.bio_offset == NOOFFSET) &&
                    (VOP_BMAP(vp, loffset, &bp->b_bio2.bio_offset, &maxclen, NULL, BUF_CMD_WRITE) ||
                     bp->b_bio2.bio_offset == NOOFFSET)) {
                        bdwrite(bp);
                        cc->v_clen = 0;
                        cc->v_lasta = bp->b_bio2.bio_offset + blksize;
                        cc->v_cstart = loffset;
                        cc->v_lastw = loffset + blksize;
                        cluster_putcache(cc);
                        return;
                }
                if (maxclen > blksize)
                        cc->v_clen = maxclen;
                else
                        cc->v_clen = blksize;
                if (!async && cc->v_clen == 0) { /* I/O not contiguous */
                        cc->v_cstart = loffset;
                        bdwrite(bp);
                } else {        /* Wait for rest of cluster */
                        cc->v_cstart = loffset;
                        bdwrite(bp);
                }
        } else if (loffset == cc->v_cstart + cc->v_clen) {
                /*
                 * At end of cluster, write it out if seqcount tells us we
                 * are operating sequentially, otherwise let the buf or
                 * update daemon handle it.
                 */
                bdwrite(bp);
                if (seqcount > 1)
                        cluster_wbuild_wb(vp, blksize, cc->v_cstart,
                                          cc->v_clen + blksize);
                cc->v_clen = 0;
                cc->v_cstart = loffset;
        } else if (vm_page_count_severe() &&
                   bp->b_loffset + blksize < filesize) {
                /*
                 * We are low on memory, get it going NOW.  However, do not
                 * try to push out a partial block at the end of the file
                 * as this could lead to extremely non-optimal write activity.
                 */
                bawrite(bp);
        } else {
                /*
                 * In the middle of a cluster, so just delay the I/O for now.
                 */
                bdwrite(bp);
        }
        cc->v_lastw = loffset + blksize;
        cc->v_lasta = bp->b_bio2.bio_offset + blksize;
        cluster_putcache(cc);
}

/*
 * This is the clustered version of bawrite().  It works similarly to
 * cluster_write() except I/O on the buffer is guaranteed to occur.
 */
int
cluster_awrite(struct buf *bp)
{
        int total;

        /*
         * Don't bother if it isn't clusterable.
         */
        if ((bp->b_flags & B_CLUSTEROK) == 0 ||
            bp->b_vp == NULL ||
            (bp->b_vp->v_flag & VOBJBUF) == 0) {
                total = bp->b_bufsize;
                bawrite(bp);
                return (total);
        }

        total = cluster_wbuild(bp->b_vp, &bp, bp->b_bufsize,
                               bp->b_loffset, vmaxiosize(bp->b_vp));

        /*
         * If bp is still non-NULL then cluster_wbuild() did not initiate
         * I/O on it and we must do so here to provide the API guarantee.
         */
        if (bp)
                bawrite(bp);

        return total;
}

/*
 * This is an awful lot like cluster_rbuild...wish they could be combined.
 * The last lbn argument is the current block on which I/O is being
 * performed.  Check to see that it doesn't fall in the middle of
 * the current block (if last_bp == NULL).
 *
 * cluster_wbuild() normally does not guarantee anything.  If bpp is
 * non-NULL and cluster_wbuild() is able to incorporate it into the
 * I/O it will set *bpp to NULL, otherwise it will leave it alone and
 * the caller must dispose of *bpp.
 */
static int
cluster_wbuild(struct vnode *vp, struct buf **bpp,
               int blksize, off_t start_loffset, int bytes)
{
        struct buf *bp, *tbp;
        int i, j;
        int totalwritten = 0;
        int must_initiate;
        int maxiosize = vmaxiosize(vp);

        while (bytes > 0) {
                /*
                 * If the buffer matches the passed locked & removed buffer
                 * we used the passed buffer (which might not be B_DELWRI).
                 *
                 * Otherwise locate the buffer and determine if it is
                 * compatible.
                 */
                if (bpp && (*bpp)->b_loffset == start_loffset) {
                        tbp = *bpp;
                        *bpp = NULL;
                        bpp = NULL;
                } else {
                        tbp = findblk(vp, start_loffset, FINDBLK_NBLOCK |
                                                         FINDBLK_KVABIO);
                        if (tbp == NULL ||
                            (tbp->b_flags & (B_LOCKED | B_INVAL | B_DELWRI)) !=
                             B_DELWRI ||
                            (LIST_FIRST(&tbp->b_dep) && buf_checkwrite(tbp))) {
                                if (tbp)
                                        BUF_UNLOCK(tbp);
                                start_loffset += blksize;
                                bytes -= blksize;
                                continue;
                        }
                        bremfree(tbp);
                }
                KKASSERT(tbp->b_cmd == BUF_CMD_DONE);

                /*
                 * Extra memory in the buffer, punt on this buffer.
                 * XXX we could handle this in most cases, but we would
                 * have to push the extra memory down to after our max
                 * possible cluster size and then potentially pull it back
                 * up if the cluster was terminated prematurely--too much
                 * hassle.
                 */
                if ((tbp->b_flags & B_CLUSTEROK) == 0 ||
                    tbp->b_bcount != tbp->b_bufsize ||
                    tbp->b_bcount != blksize ||
                    bytes == blksize) {
                        totalwritten += tbp->b_bufsize;
                        bawrite(tbp);
                        start_loffset += blksize;
                        bytes -= blksize;
                        continue;
                }

                /*
                 * Get a pbuf, limit cluster I/O on a per-device basis.  If
                 * doing cluster I/O for a file, limit cluster I/O on a
                 * per-mount basis.
                 *
                 * HAMMER and other filesystems may attempt to queue a massive
                 * amount of write I/O, using trypbuf() here easily results in
                 * situation where the I/O stream becomes non-clustered.
                 */
                if (vp->v_type == VCHR || vp->v_type == VBLK)
                        bp = getpbuf_kva(&vp->v_pbuf_count);
                else
                        bp = getpbuf_kva(&vp->v_mount->mnt_pbuf_count);

                /*
                 * Set up the pbuf.  Track our append point with b_bcount
                 * and b_bufsize.  b_bufsize is not used by the device but
                 * our caller uses it to loop clusters and we use it to
                 * detect a premature EOF on the block device.
                 */
                bp->b_bcount = 0;
                bp->b_bufsize = 0;
                bp->b_xio.xio_npages = 0;
                bp->b_loffset = tbp->b_loffset;
                bp->b_bio2.bio_offset = tbp->b_bio2.bio_offset;
                bp->b_vp = vp;

                /*
                 * We are synthesizing a buffer out of vm_page_t's, but
                 * if the block size is not page aligned then the starting
                 * address may not be either.  Inherit the b_data offset
                 * from the original buffer.
                 */
                bp->b_data = (char *)((vm_offset_t)bp->b_data |
                                      ((vm_offset_t)tbp->b_data & PAGE_MASK));
                bp->b_flags &= ~(B_ERROR | B_NOTMETA);
                bp->b_flags |= B_CLUSTER | B_BNOCLIP | B_KVABIO |
                               (tbp->b_flags & (B_VMIO | B_NEEDCOMMIT |
                                                B_NOTMETA));
                bp->b_bio1.bio_caller_info1.cluster_head = NULL;
                bp->b_bio1.bio_caller_info2.cluster_tail = NULL;

                /*
                 * From this location in the file, scan forward to see
                 * if there are buffers with adjacent data that need to
                 * be written as well.
                 *
                 * IO *must* be initiated on index 0 at this point
                 * (particularly when called from cluster_awrite()).
                 */
                for (i = 0; i < bytes; (i += blksize), (start_loffset += blksize)) {
                        if (i == 0) {
                                must_initiate = 1;
                        } else {
                                /*
                                 * Not first buffer.
                                 */
                                must_initiate = 0;
                                tbp = findblk(vp, start_loffset,
                                              FINDBLK_NBLOCK | FINDBLK_KVABIO);
                                /*
                                 * Buffer not found or could not be locked
                                 * non-blocking.
                                 */
                                if (tbp == NULL)
                                        break;

                                /*
                                 * If it IS in core, but has different
                                 * characteristics, then don't cluster
                                 * with it.
                                 */
                                if ((tbp->b_flags & (B_VMIO | B_CLUSTEROK |
                                     B_INVAL | B_DELWRI | B_NEEDCOMMIT))
                                    != (B_DELWRI | B_CLUSTEROK |
                                     (bp->b_flags & (B_VMIO | B_NEEDCOMMIT))) ||
                                    (tbp->b_flags & B_LOCKED)
                                ) {
                                        BUF_UNLOCK(tbp);
                                        break;
                                }

                                /*
                                 * Check that the combined cluster
                                 * would make sense with regard to pages
                                 * and would not be too large
                                 *
                                 * WARNING! buf_checkwrite() must be the last
                                 *          check made.  If it returns 0 then
                                 *          we must initiate the I/O.
                                 */
                                if ((tbp->b_bcount != blksize) ||
                                  ((bp->b_bio2.bio_offset + i) !=
                                    tbp->b_bio2.bio_offset) ||
                                  ((tbp->b_xio.xio_npages + bp->b_xio.xio_npages) >
                                    (maxiosize / PAGE_SIZE)) ||
                                  (LIST_FIRST(&tbp->b_dep) &&
                                   buf_checkwrite(tbp))
                                ) {
                                        BUF_UNLOCK(tbp);
                                        break;
                                }
                                if (LIST_FIRST(&tbp->b_dep))
                                        must_initiate = 1;
                                /*
                                 * Ok, it's passed all the tests,
                                 * so remove it from the free list
                                 * and mark it busy. We will use it.
                                 */
                                bremfree(tbp);
                                KKASSERT(tbp->b_cmd == BUF_CMD_DONE);
                        }

                        /*
                         * If the IO is via the VM then we do some
                         * special VM hackery (yuck).  Since the buffer's
                         * block size may not be page-aligned it is possible
                         * for a page to be shared between two buffers.  We
                         * have to get rid of the duplication when building
                         * the cluster.
                         */
                        if (tbp->b_flags & B_VMIO) {
                                vm_page_t m;

                                /*
                                 * Try to avoid deadlocks with the VM system.
                                 * However, we cannot abort the I/O if
                                 * must_initiate is non-zero.
                                 */
                                if (must_initiate == 0) {
                                        for (j = 0;
                                             j < tbp->b_xio.xio_npages;
                                             ++j) {
                                                m = tbp->b_xio.xio_pages[j];
                                                if (m->busy_count &
                                                    PBUSY_LOCKED) {
                                                        bqrelse(tbp);
                                                        goto finishcluster;
                                                }
                                        }
                                }
                                        
                                for (j = 0; j < tbp->b_xio.xio_npages; ++j) {
                                        m = tbp->b_xio.xio_pages[j];
                                        vm_page_busy_wait(m, FALSE, "clurpg");
                                        vm_page_io_start(m);
                                        vm_page_wakeup(m);
                                        vm_object_pip_add(m->object, 1);
                                        if ((bp->b_xio.xio_npages == 0) ||
                                          (bp->b_xio.xio_pages[bp->b_xio.xio_npages - 1] != m)) {
                                                bp->b_xio.xio_pages[bp->b_xio.xio_npages] = m;
                                                bp->b_xio.xio_npages++;
                                        }
                                }
                        }
                        bp->b_bcount += blksize;
                        bp->b_bufsize += blksize;

                        /*
                         * NOTE: see bwrite/bawrite code for why we no longer
                         *       undirty tbp here.
                         *
                         *       bundirty(tbp); REMOVED
                         */
                        tbp->b_flags &= ~B_ERROR;
                        tbp->b_cmd = BUF_CMD_WRITE;
                        BUF_KERNPROC(tbp);
                        cluster_append(&bp->b_bio1, tbp);

                        /*
                         * check for latent dependencies to be handled 
                         */
                        if (LIST_FIRST(&tbp->b_dep) != NULL)
                                buf_start(tbp);
                }
        finishcluster:
                pmap_qenter_noinval(trunc_page((vm_offset_t)bp->b_data),
                                    (vm_page_t *)bp->b_xio.xio_pages,
                                    bp->b_xio.xio_npages);
                if (bp->b_bufsize > bp->b_kvasize) {
                        panic("cluster_wbuild: b_bufsize(%d) "
                              "> b_kvasize(%d)\n",
                              bp->b_bufsize, bp->b_kvasize);
                }
                totalwritten += bp->b_bufsize;
                bp->b_dirtyoff = 0;
                bp->b_dirtyend = bp->b_bufsize;
                bp->b_bio1.bio_done = cluster_callback;
                bp->b_cmd = BUF_CMD_WRITE;

                vfs_busy_pages(vp, bp);
                bsetrunningbufspace(bp, bp->b_bufsize);
                BUF_KERNPROC(bp);
                vn_strategy(vp, &bp->b_bio1);

                bytes -= i;
        }
        return totalwritten;
}

/*
 * Collect together all the buffers in a cluster, plus add one
 * additional buffer passed-in.
 *
 * Only pre-existing buffers whos block size matches blksize are collected.
 * (this is primarily because HAMMER1 uses varying block sizes and we don't
 * want to override its choices).
 *
 * This code will not try to collect buffers that it cannot lock, otherwise
 * it might deadlock against SMP-friendly filesystems.
 */
static struct cluster_save *
cluster_collectbufs(cluster_cache_t *cc, struct vnode *vp,
                    struct buf *last_bp, int blksize)
{
        struct cluster_save *buflist;
        struct buf *bp;
        off_t loffset;
        int i, len;
        int j;
        int k;

        len = (int)(cc->v_lastw - cc->v_cstart) / blksize;
        KKASSERT(len > 0);
        buflist = kmalloc(sizeof(struct buf *) * (len + 1) + sizeof(*buflist),
                         M_SEGMENT, M_WAITOK);
        buflist->bs_nchildren = 0;
        buflist->bs_children = (struct buf **) (buflist + 1);
        for (loffset = cc->v_cstart, i = 0, j = 0;
             i < len;
             (loffset += blksize), i++) {
                bp = getcacheblk(vp, loffset,
                                 last_bp->b_bcount, GETBLK_SZMATCH |
                                                    GETBLK_NOWAIT);
                buflist->bs_children[i] = bp;
                if (bp == NULL) {
                        j = i + 1;
                } else if (bp->b_bio2.bio_offset == NOOFFSET) {
                        VOP_BMAP(bp->b_vp, bp->b_loffset,
                                 &bp->b_bio2.bio_offset,
                                 NULL, NULL, BUF_CMD_WRITE);
                }
        }

        /*
         * Get rid of gaps
         */
        for (k = 0; k < j; ++k) {
                if (buflist->bs_children[k]) {
                        bqrelse(buflist->bs_children[k]);
                        buflist->bs_children[k] = NULL;
                }
        }
        if (j != 0) {
                if (j != i) {
                        bcopy(buflist->bs_children + j,
                              buflist->bs_children + 0,
                              sizeof(buflist->bs_children[0]) * (i - j));
                }
                i -= j;
        }
        buflist->bs_children[i] = bp = last_bp;
        if (bp->b_bio2.bio_offset == NOOFFSET) {
                VOP_BMAP(bp->b_vp, bp->b_loffset, &bp->b_bio2.bio_offset,
                         NULL, NULL, BUF_CMD_WRITE);
        }
        buflist->bs_nchildren = i + 1;
        return (buflist);
}

void
cluster_append(struct bio *bio, struct buf *tbp)
{
        tbp->b_cluster_next = NULL;
        if (bio->bio_caller_info1.cluster_head == NULL) {
                bio->bio_caller_info1.cluster_head = tbp;
                bio->bio_caller_info2.cluster_tail = tbp;
        } else {
                bio->bio_caller_info2.cluster_tail->b_cluster_next = tbp;
                bio->bio_caller_info2.cluster_tail = tbp;
        }
}

static
void
cluster_setram(struct buf *bp)
{
        bp->b_flags |= B_RAM;
        if (bp->b_xio.xio_npages)
                vm_page_flag_set(bp->b_xio.xio_pages[0], PG_RAM);
}

static
void
cluster_clrram(struct buf *bp)
{
        bp->b_flags &= ~B_RAM;
        if (bp->b_xio.xio_npages)
                vm_page_flag_clear(bp->b_xio.xio_pages[0], PG_RAM);
}